arch/arm/boot/dts/am57xx-beagle-x15.dts

   1 /*
   2  * Copyright (C) 2014 Texas Instruments Incorporated - http://www.ti.com/
   3  *
   4  * This program is free software; you can redistribute it and/or modify
   5  * it under the terms of the GNU General Public License version 2 as
   6  * published by the Free Software Foundation.
   7  */
   8 /dts-v1/;
   9
  10 #include "dra74x.dtsi"
  11 #include <dt-bindings/gpio/gpio.h>
  12 #include <dt-bindings/interrupt-controller/irq.h>
  13
  14 / {
  15         model = "TI AM5728 BeagleBoard-X15";
  16         compatible = "ti,am572x-beagle-x15", "ti,am5728", "ti,dra742", "ti,dra74", "ti,dra7";
  17
  18         aliases {
  19                 rtc0 = &mcp_rtc;
  20                 rtc1 = &tps659038_rtc;
  21                 rtc2 = &rtc;
  22                 display0 = &hdmi0;
  23         };
  24
  25         memory {
  26                 device_type = "memory";
  27                 reg = <0x80000000 0x80000000>;
  28         };
  29
  30         vdd_3v3: fixedregulator-vdd_3v3 {
  31                 compatible = "regulator-fixed";
  32                 regulator-name = "vdd_3v3";
  33                 vin-supply = <&regen1>;
  34                 regulator-min-microvolt = <3300000>;
  35                 regulator-max-microvolt = <3300000>;
  36         };
  37
  38         aic_dvdd: fixedregulator-aic_dvdd {
  39                 compatible = "regulator-fixed";
  40                 regulator-name = "aic_dvdd_fixed";
  41                 vin-supply = <&vdd_3v3>;
  42                 regulator-min-microvolt = <1800000>;
  43                 regulator-max-microvolt = <1800000>;
  44         };
  45
  46         vtt_fixed: fixedregulator-vtt {
  47                 /* TPS51200 */
  48                 compatible = "regulator-fixed";
  49                 regulator-name = "vtt_fixed";
  50                 vin-supply = <&smps3_reg>;
  51                 regulator-min-microvolt = <3300000>;
  52                 regulator-max-microvolt = <3300000>;
  53                 regulator-always-on;
  54                 regulator-boot-on;
  55                 enable-active-high;
  56                 gpio = <&gpio7 11 GPIO_ACTIVE_HIGH>;
  57         };
  58
  59         leds {
  60                 compatible = "gpio-leds";
  61                 pinctrl-names = "default";
  62                 pinctrl-0 = <&leds_pins_default>;
  63
  64                 led@0 {
  65                         label = "beagle-x15:usr0";
  66                         gpios = <&gpio7 9 GPIO_ACTIVE_HIGH>;
  67                         linux,default-trigger = "heartbeat";
  68                         default-state = "off";
  69                 };
  70
  71                 led@1 {
  72                         label = "beagle-x15:usr1";
  73                         gpios = <&gpio7 8 GPIO_ACTIVE_HIGH>;
  74                         linux,default-trigger = "cpu0";
  75                         default-state = "off";
  76                 };
  77
  78                 led@2 {
  79                         label = "beagle-x15:usr2";
  80                         gpios = <&gpio7 14 GPIO_ACTIVE_HIGH>;
  81                         linux,default-trigger = "mmc0";
  82                         default-state = "off";
  83                 };
  84
  85                 led@3 {
  86                         label = "beagle-x15:usr3";
  87                         gpios = <&gpio7 15 GPIO_ACTIVE_HIGH>;
  88                         linux,default-trigger = "ide-disk";
  89                         default-state = "off";
  90                 };
  91         };
  92
  93         gpio_fan: gpio_fan {
  94                 /* Based on 5v 500mA AFB02505HHB */
  95                 compatible = "gpio-fan";
  96                 gpios =  <&tps659038_gpio 2 GPIO_ACTIVE_HIGH>;
  97                 gpio-fan,speed-map = <0     0>,
  98                                      <13000 1>;
  99                 #cooling-cells = <2>;
 100         };
 101
 102         extcon_usb1: extcon_usb1 {
 103                 compatible = "linux,extcon-usb-gpio";
 104                 id-gpio = <&gpio7 25 GPIO_ACTIVE_HIGH>;
 105                 pinctrl-names = "default";
 106                 pinctrl-0 = <&extcon_usb1_pins>;
 107         };
 108
 109         hdmi0: connector {
 110                 compatible = "hdmi-connector";
 111                 label = "hdmi";
 112
 113                 type = "a";
 114
 115                 port {
 116                         hdmi_connector_in: endpoint {
 117                                 remote-endpoint = <&tpd12s015_out>;
 118                         };
 119                 };
 120         };
 121
 122         tpd12s015: encoder {
 123                 compatible = "ti,tpd12s015";
 124
 125                 pinctrl-names = "default";
 126                 pinctrl-0 = <&tpd12s015_pins>;
 127
 128                 gpios = <&gpio7 10 GPIO_ACTIVE_HIGH>,   /* gpio7_10, CT CP HPD */
 129                         <&gpio6 28 GPIO_ACTIVE_HIGH>,   /* gpio6_28, LS OE */
 130                         <&gpio7 12 GPIO_ACTIVE_HIGH>;   /* gpio7_12/sp1_cs2, HPD */
 131
 132                 ports {
 133                         #address-cells = <1>;
 134                         #size-cells = <0>;
 135
 136                         port@0 {
 137                                 reg = <0>;
 138
 139                                 tpd12s015_in: endpoint {
 140                                         remote-endpoint = <&hdmi_out>;
 141                                 };
 142                         };
 143
 144                         port@1 {
 145                                 reg = <1>;
 146
 147                                 tpd12s015_out: endpoint {
 148                                         remote-endpoint = <&hdmi_connector_in>;
 149                                 };
 150                         };
 151                 };
 152         };
 153
 154         sound0: sound@0 {
 155                 compatible = "simple-audio-card";
 156                 simple-audio-card,name = "BeagleBoard-X15";
 157                 simple-audio-card,widgets =
 158                         "Line", "Line Out",
 159                         "Line", "Line In";
 160                 simple-audio-card,routing =
 161                         "Line Out",     "LLOUT",
 162                         "Line Out",     "RLOUT",
 163                         "MIC2L",        "Line In",
 164                         "MIC2R",        "Line In";
 165                 simple-audio-card,format = "dsp_b";
 166                 simple-audio-card,bitclock-master = <&sound0_master>;
 167                 simple-audio-card,frame-master = <&sound0_master>;
 168                 simple-audio-card,bitclock-inversion;
 169
 170                 simple-audio-card,cpu {
 171                         sound-dai = <&mcasp3>;
 172                 };
 173
 174                 sound0_master: simple-audio-card,codec {
 175                         sound-dai = <&tlv320aic3104>;
 176                         assigned-clocks = <&clkoutmux2_clk_mux>;
 177                         assigned-clock-parents = <&sys_clk2_dclk_div>;
 178                         clocks = <&clkout2_clk>;
 179                 };
 180         };
 181 };
 182
 183 &dra7_pmx_core {
 184         leds_pins_default: leds_pins_default {
 185                 pinctrl-single,pins = <
 186                         DRA7XX_CORE_IOPAD(0x37a8, PIN_OUTPUT | MUX_MODE14)      /* spi1_d1.gpio7_8 */
 187                         DRA7XX_CORE_IOPAD(0x37ac, PIN_OUTPUT | MUX_MODE14)      /* spi1_d0.gpio7_9 */
 188                         DRA7XX_CORE_IOPAD(0x37c0, PIN_OUTPUT | MUX_MODE14)      /* spi2_sclk.gpio7_14 */
 189                         DRA7XX_CORE_IOPAD(0x37c4, PIN_OUTPUT | MUX_MODE14)      /* spi2_d1.gpio7_15 */
 190                 >;
 191         };
 192
 193         i2c1_pins_default: i2c1_pins_default {
 194                 pinctrl-single,pins = <
 195                         DRA7XX_CORE_IOPAD(0x3800, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_sda.sda */
 196                         DRA7XX_CORE_IOPAD(0x3804, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_scl.scl */
 197                 >;
 198         };
 199
 200         hdmi_pins: pinmux_hdmi_pins {
 201                 pinctrl-single,pins = <
 202                         DRA7XX_CORE_IOPAD(0x3808, PIN_INPUT | MUX_MODE1)        /* i2c2_sda.hdmi1_ddc_scl */
 203                         DRA7XX_CORE_IOPAD(0x380c, PIN_INPUT | MUX_MODE1)        /* i2c2_scl.hdmi1_ddc_sda */
 204                 >;
 205         };
 206
 207         i2c3_pins_default: i2c3_pins_default {
 208                 pinctrl-single,pins = <
 209                         DRA7XX_CORE_IOPAD(0x36a4, PIN_INPUT| MUX_MODE10)        /* mcasp1_aclkx.i2c3_sda */
 210                         DRA7XX_CORE_IOPAD(0x36a8, PIN_INPUT| MUX_MODE10)        /* mcasp1_fsx.i2c3_scl */
 211                 >;
 212         };
 213
 214         uart3_pins_default: uart3_pins_default {
 215                 pinctrl-single,pins = <
 216                         DRA7XX_CORE_IOPAD(0x37f8, PIN_INPUT_SLEW | MUX_MODE2) /* uart2_ctsn.uart3_rxd */
 217                         DRA7XX_CORE_IOPAD(0x37fc, PIN_INPUT_SLEW | MUX_MODE1) /* uart2_rtsn.uart3_txd */
 218                 >;
 219         };
 220
 221         mmc1_pins_default: mmc1_pins_default {
 222                 pinctrl-single,pins = <
 223                         DRA7XX_CORE_IOPAD(0x376c, PIN_INPUT | MUX_MODE14)       /* mmc1sdcd.gpio219 */
 224                         DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_clk.clk */
 225                         DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_cmd.cmd */
 226                         DRA7XX_CORE_IOPAD(0x375c, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat0.dat0 */
 227                         DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat1.dat1 */
 228                         DRA7XX_CORE_IOPAD(0x3764, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat2.dat2 */
 229                         DRA7XX_CORE_IOPAD(0x3768, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat3.dat3 */
 230                 >;
 231         };
 232
 233         mmc2_pins_default: mmc2_pins_default {
 234                 pinctrl-single,pins = <
 235                         DRA7XX_CORE_IOPAD(0x349c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a23.mmc2_clk */
 236                         DRA7XX_CORE_IOPAD(0x34b0, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_cs1.mmc2_cmd */
 237                         DRA7XX_CORE_IOPAD(0x34a0, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a24.mmc2_dat0 */
 238                         DRA7XX_CORE_IOPAD(0x34a4, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a25.mmc2_dat1 */
 239                         DRA7XX_CORE_IOPAD(0x34a8, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a26.mmc2_dat2 */
 240                         DRA7XX_CORE_IOPAD(0x34ac, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a27.mmc2_dat3 */
 241                         DRA7XX_CORE_IOPAD(0x348c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a19.mmc2_dat4 */
 242                         DRA7XX_CORE_IOPAD(0x3490, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a20.mmc2_dat5 */
 243                         DRA7XX_CORE_IOPAD(0x3494, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a21.mmc2_dat6 */
 244                         DRA7XX_CORE_IOPAD(0x3498, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a22.mmc2_dat7 */
 245                 >;
 246         };
 247
 248         cpsw_pins_default: cpsw_pins_default {
 249                 pinctrl-single,pins = <
 250                         /* Slave 1 */
 251                         DRA7XX_CORE_IOPAD(0x3650, PIN_OUTPUT | MUX_MODE0)       /* rgmii1_tclk */
 252                         DRA7XX_CORE_IOPAD(0x3654, PIN_OUTPUT | MUX_MODE0)       /* rgmii1_tctl */
 253                         DRA7XX_CORE_IOPAD(0x3658, PIN_OUTPUT | MUX_MODE0)       /* rgmii1_td3 */
 254                         DRA7XX_CORE_IOPAD(0x365c, PIN_OUTPUT | MUX_MODE0)       /* rgmii1_td2 */
 255                         DRA7XX_CORE_IOPAD(0x3660, PIN_OUTPUT | MUX_MODE0)       /* rgmii1_td1 */
 256                         DRA7XX_CORE_IOPAD(0x3664, PIN_OUTPUT | MUX_MODE0)       /* rgmii1_td0 */
 257                         DRA7XX_CORE_IOPAD(0x3668, PIN_INPUT | MUX_MODE0)        /* rgmii1_rclk */
 258                         DRA7XX_CORE_IOPAD(0x366c, PIN_INPUT | MUX_MODE0)        /* rgmii1_rctl */
 259                         DRA7XX_CORE_IOPAD(0x3670, PIN_INPUT | MUX_MODE0)        /* rgmii1_rd3 */
 260                         DRA7XX_CORE_IOPAD(0x3674, PIN_INPUT | MUX_MODE0)        /* rgmii1_rd2 */
 261                         DRA7XX_CORE_IOPAD(0x3678, PIN_INPUT | MUX_MODE0)        /* rgmii1_rd1 */
 262                         DRA7XX_CORE_IOPAD(0x367c, PIN_INPUT | MUX_MODE0)        /* rgmii1_rd0 */
 263
 264                         /* Slave 2 */
 265                         DRA7XX_CORE_IOPAD(0x3598, PIN_OUTPUT | MUX_MODE3)       /* rgmii2_tclk */
 266                         DRA7XX_CORE_IOPAD(0x359c, PIN_OUTPUT | MUX_MODE3)       /* rgmii2_tctl */
 267                         DRA7XX_CORE_IOPAD(0x35a0, PIN_OUTPUT | MUX_MODE3)       /* rgmii2_td3 */
 268                         DRA7XX_CORE_IOPAD(0x35a4, PIN_OUTPUT | MUX_MODE3)       /* rgmii2_td2 */
 269                         DRA7XX_CORE_IOPAD(0x35a8, PIN_OUTPUT | MUX_MODE3)       /* rgmii2_td1 */
 270                         DRA7XX_CORE_IOPAD(0x35ac, PIN_OUTPUT | MUX_MODE3)       /* rgmii2_td0 */
 271                         DRA7XX_CORE_IOPAD(0x35b0, PIN_INPUT | MUX_MODE3)        /* rgmii2_rclk */
 272                         DRA7XX_CORE_IOPAD(0x35b4, PIN_INPUT | MUX_MODE3)        /* rgmii2_rctl */
 273                         DRA7XX_CORE_IOPAD(0x35b8, PIN_INPUT | MUX_MODE3)        /* rgmii2_rd3 */
 274                         DRA7XX_CORE_IOPAD(0x35bc, PIN_INPUT | MUX_MODE3)        /* rgmii2_rd2 */
 275                         DRA7XX_CORE_IOPAD(0x35c0, PIN_INPUT | MUX_MODE3)        /* rgmii2_rd1 */
 276                         DRA7XX_CORE_IOPAD(0x35c4, PIN_INPUT | MUX_MODE3)        /* rgmii2_rd0 */
 277                 >;
 278
 279         };
 280
 281         cpsw_pins_sleep: cpsw_pins_sleep {
 282                 pinctrl-single,pins = <
 283                         /* Slave 1 */
 284                         DRA7XX_CORE_IOPAD(0x3650, PIN_INPUT | MUX_MODE15)
 285                         DRA7XX_CORE_IOPAD(0x3654, PIN_INPUT | MUX_MODE15)
 286                         DRA7XX_CORE_IOPAD(0x3658, PIN_INPUT | MUX_MODE15)
 287                         DRA7XX_CORE_IOPAD(0x365c, PIN_INPUT | MUX_MODE15)
 288                         DRA7XX_CORE_IOPAD(0x3660, PIN_INPUT | MUX_MODE15)
 289                         DRA7XX_CORE_IOPAD(0x3664, PIN_INPUT | MUX_MODE15)
 290                         DRA7XX_CORE_IOPAD(0x3668, PIN_INPUT | MUX_MODE15)
 291                         DRA7XX_CORE_IOPAD(0x366c, PIN_INPUT | MUX_MODE15)
 292                         DRA7XX_CORE_IOPAD(0x3670, PIN_INPUT | MUX_MODE15)
 293                         DRA7XX_CORE_IOPAD(0x3674, PIN_INPUT | MUX_MODE15)
 294                         DRA7XX_CORE_IOPAD(0x3678, PIN_INPUT | MUX_MODE15)
 295                         DRA7XX_CORE_IOPAD(0x367c, PIN_INPUT | MUX_MODE15)
 296
 297                         /* Slave 2 */
 298                         DRA7XX_CORE_IOPAD(0x3598, PIN_INPUT | MUX_MODE15)
 299                         DRA7XX_CORE_IOPAD(0x359c, PIN_INPUT | MUX_MODE15)
 300                         DRA7XX_CORE_IOPAD(0x35a0, PIN_INPUT | MUX_MODE15)
 301                         DRA7XX_CORE_IOPAD(0x35a4, PIN_INPUT | MUX_MODE15)
 302                         DRA7XX_CORE_IOPAD(0x35a8, PIN_INPUT | MUX_MODE15)
 303                         DRA7XX_CORE_IOPAD(0x35ac, PIN_INPUT | MUX_MODE15)
 304                         DRA7XX_CORE_IOPAD(0x35b0, PIN_INPUT | MUX_MODE15)
 305                         DRA7XX_CORE_IOPAD(0x35b4, PIN_INPUT | MUX_MODE15)
 306                         DRA7XX_CORE_IOPAD(0x35b8, PIN_INPUT | MUX_MODE15)
 307                         DRA7XX_CORE_IOPAD(0x35bc, PIN_INPUT | MUX_MODE15)
 308                         DRA7XX_CORE_IOPAD(0x35c0, PIN_INPUT | MUX_MODE15)
 309                         DRA7XX_CORE_IOPAD(0x35c4, PIN_INPUT | MUX_MODE15)
 310                 >;
 311         };
 312
 313         davinci_mdio_pins_default: davinci_mdio_pins_default {
 314                 pinctrl-single,pins = <
 315                         /* MDIO */
 316                         DRA7XX_CORE_IOPAD(0x363c, PIN_OUTPUT_PULLUP | MUX_MODE0)        /* mdio_mclk */
 317                         DRA7XX_CORE_IOPAD(0x3640, PIN_INPUT_PULLUP | MUX_MODE0) /* mdio_d */
 318                 >;
 319         };
 320
 321         davinci_mdio_pins_sleep: davinci_mdio_pins_sleep {
 322                 pinctrl-single,pins = <
 323                         DRA7XX_CORE_IOPAD(0x363c, PIN_INPUT | MUX_MODE15)
 324                         DRA7XX_CORE_IOPAD(0x3640, PIN_INPUT | MUX_MODE15)
 325                 >;
 326         };
 327
 328         tps659038_pins_default: tps659038_pins_default {
 329                 pinctrl-single,pins = <
 330                         DRA7XX_CORE_IOPAD(0x3818, PIN_INPUT_PULLUP | MUX_MODE14)        /* wakeup0.gpio1_0 */
 331                 >;
 332         };
 333
 334         tmp102_pins_default: tmp102_pins_default {
 335                 pinctrl-single,pins = <
 336                         DRA7XX_CORE_IOPAD(0x37c8, PIN_INPUT_PULLUP | MUX_MODE14)        /* spi2_d0.gpio7_16 */
 337                 >;
 338         };
 339
 340         mcp79410_pins_default: mcp79410_pins_default {
 341                 pinctrl-single,pins = <
 342                         DRA7XX_CORE_IOPAD(0x3824, PIN_INPUT_PULLUP | MUX_MODE1) /* wakeup3.sys_nirq1 */
 343                 >;
 344         };
 345
 346         usb1_pins: pinmux_usb1_pins {
 347                 pinctrl-single,pins = <
 348                         DRA7XX_CORE_IOPAD(0x3680, PIN_INPUT_SLEW | MUX_MODE0) /* usb1_drvvbus */
 349                 >;
 350         };
 351
 352         extcon_usb1_pins: extcon_usb1_pins {
 353                 pinctrl-single,pins = <
 354                         DRA7XX_CORE_IOPAD(0x37ec, PIN_INPUT_PULLUP | MUX_MODE14) /* uart1_rtsn.gpio7_25 */
 355                 >;
 356         };
 357
 358         tpd12s015_pins: pinmux_tpd12s015_pins {
 359                 pinctrl-single,pins = <
 360                         DRA7XX_CORE_IOPAD(0x37b0, PIN_OUTPUT | MUX_MODE14)              /* gpio7_10 CT_CP_HPD */
 361                         DRA7XX_CORE_IOPAD(0x37b8, PIN_INPUT_PULLDOWN | MUX_MODE14)      /* gpio7_12 HPD */
 362                         DRA7XX_CORE_IOPAD(0x3770, PIN_OUTPUT | MUX_MODE14)              /* gpio6_28 LS_OE */
 363                 >;
 364         };
 365
 366         clkout2_pins_default: clkout2_pins_default {
 367                 pinctrl-single,pins = <
 368                         DRA7XX_CORE_IOPAD(0x3694, PIN_OUTPUT_PULLDOWN | MUX_MODE9)      /* xref_clk0.clkout2 */
 369                 >;
 370         };
 371
 372         clkout2_pins_sleep: clkout2_pins_sleep {
 373                 pinctrl-single,pins = <
 374                         DRA7XX_CORE_IOPAD(0x3694, PIN_INPUT | MUX_MODE15)       /* xref_clk0.clkout2 */
 375                 >;
 376         };
 377
 378         mcasp3_pins_default: mcasp3_pins_default {
 379                 pinctrl-single,pins = <
 380                         DRA7XX_CORE_IOPAD(0x3724, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp3_aclkx.mcasp3_aclkx */
 381                         DRA7XX_CORE_IOPAD(0x3728, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp3_fsx.mcasp3_fsx */
 382                         DRA7XX_CORE_IOPAD(0x372c, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mcasp3_axr0.mcasp3_axr0 */
 383                         DRA7XX_CORE_IOPAD(0x3730, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp3_axr1.mcasp3_axr1 */
 384                 >;
 385         };
 386
 387         mcasp3_pins_sleep: mcasp3_pins_sleep {
 388                 pinctrl-single,pins = <
 389                         DRA7XX_CORE_IOPAD(0x3724, PIN_INPUT | MUX_MODE15)
 390                         DRA7XX_CORE_IOPAD(0x3728, PIN_INPUT | MUX_MODE15)
 391                         DRA7XX_CORE_IOPAD(0x372c, PIN_INPUT | MUX_MODE15)
 392                         DRA7XX_CORE_IOPAD(0x3730, PIN_INPUT | MUX_MODE15)
 393                 >;
 394         };
 395 };
 396
 397 &i2c1 {
 398         status = "okay";
 399         pinctrl-names = "default";
 400         pinctrl-0 = <&i2c1_pins_default>;
 401         clock-frequency = <400000>;
 402
 403         tps659038: tps659038@58 {
 404                 compatible = "ti,tps659038";
 405                 reg = <0x58>;
 406                 interrupt-parent = <&gpio1>;
 407                 interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
 408
 409                 pinctrl-names = "default";
 410                 pinctrl-0 = <&tps659038_pins_default>;
 411
 412                 #interrupt-cells = <2>;
 413                 interrupt-controller;
 414
 415                 ti,system-power-controller;
 416
 417                 tps659038_pmic {
 418                         compatible = "ti,tps659038-pmic";
 419
 420                         regulators {
 421                                 smps12_reg: smps12 {
 422                                         /* VDD_MPU */
 423                                         regulator-name = "smps12";
 424                                         regulator-min-microvolt = < 850000>;
 425                                         regulator-max-microvolt = <1250000>;
 426                                         regulator-always-on;
 427                                         regulator-boot-on;
 428                                 };
 429
 430                                 smps3_reg: smps3 {
 431                                         /* VDD_DDR */
 432                                         regulator-name = "smps3";
 433                                         regulator-min-microvolt = <1350000>;
 434                                         regulator-max-microvolt = <1350000>;
 435                                         regulator-always-on;
 436                                         regulator-boot-on;
 437                                 };
 438
 439                                 smps45_reg: smps45 {
 440                                         /* VDD_DSPEVE, VDD_IVA, VDD_GPU */
 441                                         regulator-name = "smps45";
 442                                         regulator-min-microvolt = < 850000>;
 443                                         regulator-max-microvolt = <1150000>;
 444                                         regulator-always-on;
 445                                         regulator-boot-on;
 446                                 };
 447
 448                                 smps6_reg: smps6 {
 449                                         /* VDD_CORE */
 450                                         regulator-name = "smps6";
 451                                         regulator-min-microvolt = <850000>;
 452                                         regulator-max-microvolt = <1030000>;
 453                                         regulator-always-on;
 454                                         regulator-boot-on;
 455                                 };
 456
 457                                 /* SMPS7 unused */
 458
 459                                 smps8_reg: smps8 {
 460                                         /* VDD_1V8 */
 461                                         regulator-name = "smps8";
 462                                         regulator-min-microvolt = <1800000>;
 463                                         regulator-max-microvolt = <1800000>;
 464                                         regulator-always-on;
 465                                         regulator-boot-on;
 466                                 };
 467
 468                                 /* SMPS9 unused */
 469
 470                                 ldo1_reg: ldo1 {
 471                                         /* VDD_SD / VDDSHV8  */
 472                                         regulator-name = "ldo1";
 473                                         regulator-min-microvolt = <1800000>;
 474                                         regulator-max-microvolt = <3300000>;
 475                                         regulator-boot-on;
 476                                         regulator-always-on;
 477                                 };
 478
 479                                 ldo2_reg: ldo2 {
 480                                         /* VDD_SHV5 */
 481                                         regulator-name = "ldo2";
 482                                         regulator-min-microvolt = <3300000>;
 483                                         regulator-max-microvolt = <3300000>;
 484                                         regulator-always-on;
 485                                         regulator-boot-on;
 486                                 };
 487
 488                                 ldo3_reg: ldo3 {
 489                                         /* VDDA_1V8_PHYA */
 490                                         regulator-name = "ldo3";
 491                                         regulator-min-microvolt = <1800000>;
 492                                         regulator-max-microvolt = <1800000>;
 493                                         regulator-always-on;
 494                                         regulator-boot-on;
 495                                 };
 496
 497                                 ldo4_reg: ldo4 {
 498                                         /* VDDA_1V8_PHYB */
 499                                         regulator-name = "ldo4";
 500                                         regulator-min-microvolt = <1800000>;
 501                                         regulator-max-microvolt = <1800000>;
 502                                         regulator-always-on;
 503                                         regulator-boot-on;
 504                                 };
 505
 506                                 ldo9_reg: ldo9 {
 507                                         /* VDD_RTC */
 508                                         regulator-name = "ldo9";
 509                                         regulator-min-microvolt = <1050000>;
 510                                         regulator-max-microvolt = <1050000>;
 511                                         regulator-always-on;
 512                                         regulator-boot-on;
 513                                 };
 514
 515                                 ldoln_reg: ldoln {
 516                                         /* VDDA_1V8_PLL */
 517                                         regulator-name = "ldoln";
 518                                         regulator-min-microvolt = <1800000>;
 519                                         regulator-max-microvolt = <1800000>;
 520                                         regulator-always-on;
 521                                         regulator-boot-on;
 522                                 };
 523
 524                                 ldousb_reg: ldousb {
 525                                         /* VDDA_3V_USB: VDDA_USBHS33 */
 526                                         regulator-name = "ldousb";
 527                                         regulator-min-microvolt = <3300000>;
 528                                         regulator-max-microvolt = <3300000>;
 529                                         regulator-boot-on;
 530                                 };
 531
 532                                 regen1: regen1 {
 533                                         /* VDD_3V3_ON */
 534                                         regulator-name = "regen1";
 535                                         regulator-boot-on;
 536                                         regulator-always-on;
 537                                 };
 538                         };
 539                 };
 540
 541                 tps659038_rtc: tps659038_rtc {
 542                         compatible = "ti,palmas-rtc";
 543                         interrupt-parent = <&tps659038>;
 544                         interrupts = <8 IRQ_TYPE_EDGE_FALLING>;
 545                         wakeup-source;
 546                 };
 547
 548                 tps659038_pwr_button: tps659038_pwr_button {
 549                         compatible = "ti,palmas-pwrbutton";
 550                         interrupt-parent = <&tps659038>;
 551                         interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
 552                         wakeup-source;
 553                         ti,palmas-long-press-seconds = <12>;
 554                 };
 555
 556                 tps659038_gpio: tps659038_gpio {
 557                         compatible = "ti,palmas-gpio";
 558                         gpio-controller;
 559                         #gpio-cells = <2>;
 560                 };
 561
 562                 extcon_usb2: tps659038_usb {
 563                         compatible = "ti,palmas-usb-vid";
 564                         ti,enable-vbus-detection;
 565                         vbus-gpio = <&gpio4 21 GPIO_ACTIVE_HIGH>;
 566                 };
 567
 568         };
 569
 570         tmp102: tmp102@48 {
 571                 compatible = "ti,tmp102";
 572                 reg = <0x48>;
 573                 pinctrl-names = "default";
 574                 pinctrl-0 = <&tmp102_pins_default>;
 575                 interrupt-parent = <&gpio7>;
 576                 interrupts = <16 IRQ_TYPE_LEVEL_LOW>;
 577                 #thermal-sensor-cells = <1>;
 578         };
 579
 580         tlv320aic3104: tlv320aic3104@18 {
 581                 #sound-dai-cells = <0>;
 582                 compatible = "ti,tlv320aic3104";
 583                 reg = <0x18>;
 584                 pinctrl-names = "default", "sleep";
 585                 pinctrl-0 = <&clkout2_pins_default>;
 586                 pinctrl-1 = <&clkout2_pins_sleep>;
 587                 status = "okay";
 588                 adc-settle-ms = <40>;
 589
 590                 AVDD-supply = <&vdd_3v3>;
 591                 IOVDD-supply = <&vdd_3v3>;
 592                 DRVDD-supply = <&vdd_3v3>;
 593                 DVDD-supply = <&aic_dvdd>;
 594         };
 595 };
 596
 597 &i2c3 {
 598         status = "okay";
 599         pinctrl-names = "default";
 600         pinctrl-0 = <&i2c3_pins_default>;
 601         clock-frequency = <400000>;
 602
 603         mcp_rtc: rtc@6f {
 604                 compatible = "microchip,mcp7941x";
 605                 reg = <0x6f>;
 606                 interrupts-extended = <&crossbar_mpu GIC_SPI 2 IRQ_TYPE_EDGE_RISING>,
 607                                       <&dra7_pmx_core 0x424>;
 608                 interrupt-names = "irq", "wakeup";
 609
 610                 pinctrl-names = "default";
 611                 pinctrl-0 = <&mcp79410_pins_default>;
 612
 613                 vcc-supply = <&vdd_3v3>;
 614                 wakeup-source;
 615         };
 616 };
 617
 618 &gpio7 {
 619         ti,no-reset-on-init;
 620         ti,no-idle-on-init;
 621 };
 622
 623 &cpu0 {
 624         cpu0-supply = <&smps12_reg>;
 625         voltage-tolerance = <1>;
 626 };
 627
 628 &uart3 {
 629         status = "okay";
 630         interrupts-extended = <&crossbar_mpu GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>,
 631                               <&dra7_pmx_core 0x3f8>;
 632
 633         pinctrl-names = "default";
 634         pinctrl-0 = <&uart3_pins_default>;
 635 };
 636
 637 &mac {
 638         status = "okay";
 639         pinctrl-names = "default", "sleep";
 640         pinctrl-0 = <&cpsw_pins_default>;
 641         pinctrl-1 = <&cpsw_pins_sleep>;
 642         dual_emac;
 643 };
 644
 645 &cpsw_emac0 {
 646         phy_id = <&davinci_mdio>, <1>;
 647         phy-mode = "rgmii";
 648         dual_emac_res_vlan = <1>;
 649 };
 650
 651 &cpsw_emac1 {
 652         phy_id = <&davinci_mdio>, <2>;
 653         phy-mode = "rgmii";
 654         dual_emac_res_vlan = <2>;
 655 };
 656
 657 &davinci_mdio {
 658         pinctrl-names = "default", "sleep";
 659         pinctrl-0 = <&davinci_mdio_pins_default>;
 660         pinctrl-1 = <&davinci_mdio_pins_sleep>;
 661 };
 662
 663 &mmc1 {
 664         status = "okay";
 665
 666         pinctrl-names = "default";
 667         pinctrl-0 = <&mmc1_pins_default>;
 668
 669         vmmc-supply = <&ldo1_reg>;
 670         bus-width = <4>;
 671         cd-gpios = <&gpio6 27 GPIO_ACTIVE_LOW>; /* gpio 219 */
 672 };
 673
 674 &mmc2 {
 675         status = "okay";
 676
 677         pinctrl-names = "default";
 678         pinctrl-0 = <&mmc2_pins_default>;
 679
 680         vmmc-supply = <&vdd_3v3>;
 681         bus-width = <8>;
 682         ti,non-removable;
 683         cap-mmc-dual-data-rate;
 684 };
 685
 686 &sata {
 687         status = "okay";
 688 };
 689
 690 &usb2_phy1 {
 691         phy-supply = <&ldousb_reg>;
 692 };
 693
 694 &usb2_phy2 {
 695         phy-supply = <&ldousb_reg>;
 696 };
 697
 698 &usb1 {
 699         dr_mode = "host";
 700         pinctrl-names = "default";
 701         pinctrl-0 = <&usb1_pins>;
 702 };
 703
 704 &omap_dwc3_1 {
 705         extcon = <&extcon_usb1>;
 706 };
 707
 708 &omap_dwc3_2 {
 709         extcon = <&extcon_usb2>;
 710 };
 711
 712 &usb2 {
 713         /*
 714          * Stand alone usage is peripheral only.
 715          * However, with some resistor modifications
 716          * this port can be used via expansion connectors
 717          * as "host" or "dual-role". If so, provide
 718          * the necessary dr_mode override in the expansion
 719          * board's DT.
 720          */
 721         dr_mode = "peripheral";
 722 };
 723
 724 &cpu_trips {
 725         cpu_alert1: cpu_alert1 {
 726                 temperature = <50000>; /* millicelsius */
 727                 hysteresis = <2000>; /* millicelsius */
 728                 type = "active";
 729         };
 730 };
 731
 732 &cpu_cooling_maps {
 733         map1 {
 734                 trip = <&cpu_alert1>;
 735                 cooling-device = <&gpio_fan THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 736         };
 737 };
 738
 739 &thermal_zones {
 740         board_thermal: board_thermal {
 741                 polling-delay-passive = <1250>; /* milliseconds */
 742                 polling-delay = <1500>; /* milliseconds */
 743
 744                                 /* sensor       ID */
 745                 thermal-sensors = <&tmp102     0>;
 746
 747                 board_trips: trips {
 748                         board_alert0: board_alert {
 749                                 temperature = <40000>; /* millicelsius */
 750                                 hysteresis = <2000>; /* millicelsius */
 751                                 type = "active";
 752                         };
 753
 754                         board_crit: board_crit {
 755                                 temperature = <105000>; /* millicelsius */
 756                                 hysteresis = <0>; /* millicelsius */
 757                                 type = "critical";
 758                         };
 759                 };
 760
 761                 board_cooling_maps: cooling-maps {
 762                         map0 {
 763                                 trip = <&board_alert0>;
 764                                 cooling-device =
 765                                   <&gpio_fan THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 766                         };
 767                 };
 768        };
 769 };
 770
 771 &dss {
 772         status = "ok";
 773
 774         vdda_video-supply = <&ldoln_reg>;
 775 };
 776
 777 &hdmi {
 778         status = "ok";
 779         vdda-supply = <&ldo4_reg>;
 780
 781         pinctrl-names = "default";
 782         pinctrl-0 = <&hdmi_pins>;
 783
 784         port {
 785                 hdmi_out: endpoint {
 786                         remote-endpoint = <&tpd12s015_in>;
 787                 };
 788         };
 789 };
 790
 791 &pcie1 {
 792         gpios = <&gpio2 8 GPIO_ACTIVE_LOW>;
 793 };
 794
 795 &mcasp3 {
 796         #sound-dai-cells = <0>;
 797         pinctrl-names = "default", "sleep";
 798         pinctrl-0 = <&mcasp3_pins_default>;
 799         pinctrl-1 = <&mcasp3_pins_sleep>;
 800         assigned-clocks = <&mcasp3_ahclkx_mux>;
 801         assigned-clock-parents = <&sys_clkin2>;
 802         status = "okay";
 803
 804         op-mode = <0>;  /* MCASP_IIS_MODE */
 805         tdm-slots = <2>;
 806         /* 4 serializers */
 807         serial-dir = <  /* 0: INACTIVE, 1: TX, 2: RX */
 808                 1 2 0 0
 809         >;
 810 };
 811
 812 &mailbox5 {
 813         status = "okay";
 814         mbox_ipu1_ipc3x: mbox_ipu1_ipc3x {
 815                 status = "okay";
 816         };
 817         mbox_dsp1_ipc3x: mbox_dsp1_ipc3x {
 818                 status = "okay";
 819         };
 820 };
 821
 822 &mailbox6 {
 823         status = "okay";
 824         mbox_ipu2_ipc3x: mbox_ipu2_ipc3x {
 825                 status = "okay";
 826         };
 827         mbox_dsp2_ipc3x: mbox_dsp2_ipc3x {
 828                 status = "okay";
 829         };
 830 };