2 * This file is licensed under the terms of the GNU General Public License
3 * version 2. This program is licensed "as is" without any warranty of any
4 * kind, whether express or implied.
7 #include <dt-bindings/gpio/gpio.h>
8 #include <dt-bindings/pinctrl/omap.h>
10 #include "skeleton.dtsi"
13 compatible = "ti,dm816";
14 interrupt-parent = <&intc>;
30 compatible = "arm,cortex-a8";
37 compatible = "arm,cortex-a8-pmu";
42 * The soc node represents the soc top level view. It is used for IPs
43 * that are not memory mapped in the MPU view or for the MPU itself.
46 compatible = "ti,omap-infra";
48 compatible = "ti,omap3-mpu";
54 * XXX: Use a flat representation of the dm816x interconnect.
55 * The real dm816x interconnect network is quite complex. Since
56 * it will not bring real advantage to represent that in DT
57 * for the moment, just use a fake OCP bus entry to represent
58 * the whole bus hierarchy.
61 compatible = "simple-bus";
62 reg = <0x44000000 0x10000>;
69 compatible = "ti,dm816-prcm";
70 reg = <0x48180000 0x4000>;
77 prcm_clockdomains: clockdomains {
82 compatible = "ti,dm816-scrm", "simple-bus";
83 reg = <0x48140000 0x21000>;
86 ranges = <0 0x48140000 0x21000>;
88 dm816x_pinmux: pinmux@800 {
89 compatible = "pinctrl-single";
93 pinctrl-single,register-width = <16>;
94 pinctrl-single,function-mask = <0xf>;
97 /* Device Configuration Registers */
98 scm_conf: syscon@600 {
99 compatible = "syscon", "simple-bus";
101 #address-cells = <1>;
103 ranges = <0 0x600 0x110>;
105 usb_phy0: usb-phy@20 {
106 compatible = "ti,dm8168-usb-phy";
109 clocks = <&main_fapll 6>;
110 clock-names = "refclk";
112 syscon = <&scm_conf>;
115 usb_phy1: usb-phy@28 {
116 compatible = "ti,dm8168-usb-phy";
119 clocks = <&main_fapll 6>;
120 clock-names = "refclk";
122 syscon = <&scm_conf>;
126 scrm_clocks: clocks {
127 #address-cells = <1>;
131 scrm_clockdomains: clockdomains {
135 edma: edma@49000000 {
136 compatible = "ti,edma3";
137 ti,hwmods = "tpcc", "tptc0", "tptc1", "tptc2", "tptc3";
138 reg = <0x49000000 0x10000>,
140 interrupts = <12 13 14>;
145 compatible = "ti,816-elm";
147 reg = <0x48080000 0x2000>;
151 gpio1: gpio@48032000 {
152 compatible = "ti,omap4-gpio";
155 reg = <0x48032000 0x1000>;
159 interrupt-controller;
160 #interrupt-cells = <2>;
163 gpio2: gpio@4804c000 {
164 compatible = "ti,omap4-gpio";
167 reg = <0x4804c000 0x1000>;
171 interrupt-controller;
172 #interrupt-cells = <2>;
175 gpmc: gpmc@50000000 {
176 compatible = "ti,am3352-gpmc";
178 reg = <0x50000000 0x2000>;
179 #address-cells = <2>;
185 gpmc,num-waitpins = <2>;
189 compatible = "ti,omap4-i2c";
191 reg = <0x48028000 0x1000>;
192 #address-cells = <1>;
195 dmas = <&edma 58 &edma 59>;
196 dma-names = "tx", "rx";
200 compatible = "ti,omap4-i2c";
202 reg = <0x4802a000 0x1000>;
203 #address-cells = <1>;
206 dmas = <&edma 60 &edma 61>;
207 dma-names = "tx", "rx";
210 intc: interrupt-controller@48200000 {
211 compatible = "ti,dm816-intc";
212 interrupt-controller;
213 #interrupt-cells = <1>;
214 reg = <0x48200000 0x1000>;
217 mailbox: mailbox@480c8000 {
218 compatible = "ti,omap4-mailbox";
219 reg = <0x480c8000 0x2000>;
221 ti,hwmods = "mailbox";
223 ti,mbox-num-users = <4>;
224 ti,mbox-num-fifos = <12>;
226 ti,mbox-tx = <3 0 0>;
227 ti,mbox-rx = <0 0 0>;
231 spinbox: spinbox@480ca000 {
232 compatible = "ti,omap4-hwspinlock";
233 reg = <0x480ca000 0x2000>;
234 ti,hwmods = "spinbox";
238 mdio: mdio@4a100800 {
239 compatible = "ti,davinci_mdio";
240 #address-cells = <1>;
242 reg = <0x4a100800 0x100>;
243 ti,hwmods = "davinci_mdio";
244 bus_freq = <1000000>;
245 phy0: ethernet-phy@0 {
248 phy1: ethernet-phy@1 {
253 eth0: ethernet@4a100000 {
254 compatible = "ti,dm816-emac";
256 reg = <0x4a100000 0x800
258 clocks = <&sysclk24_ck>;
259 syscon = <&scm_conf>;
260 ti,davinci-ctrl-reg-offset = <0>;
261 ti,davinci-ctrl-mod-reg-offset = <0x900>;
262 ti,davinci-ctrl-ram-offset = <0x2000>;
263 ti,davinci-ctrl-ram-size = <0x2000>;
264 interrupts = <40 41 42 43>;
265 phy-handle = <&phy0>;
268 eth1: ethernet@4a120000 {
269 compatible = "ti,dm816-emac";
271 reg = <0x4a120000 0x4000>;
272 clocks = <&sysclk24_ck>;
273 syscon = <&scm_conf>;
274 ti,davinci-ctrl-reg-offset = <0>;
275 ti,davinci-ctrl-mod-reg-offset = <0x900>;
276 ti,davinci-ctrl-ram-offset = <0x2000>;
277 ti,davinci-ctrl-ram-size = <0x2000>;
278 interrupts = <44 45 46 47>;
279 phy-handle = <&phy1>;
282 mcspi1: spi@48030000 {
283 compatible = "ti,omap4-mcspi";
284 reg = <0x48030000 0x1000>;
285 #address-cells = <1>;
289 ti,hwmods = "mcspi1";
290 dmas = <&edma 16 &edma 17
294 dma-names = "tx0", "rx0", "tx1", "rx1",
295 "tx2", "rx2", "tx3", "rx3";
299 compatible = "ti,omap4-hsmmc";
300 reg = <0x48060000 0x11000>;
303 dmas = <&edma 24 &edma 25>;
304 dma-names = "tx", "rx";
307 timer1: timer@4802e000 {
308 compatible = "ti,dm816-timer";
309 reg = <0x4802e000 0x2000>;
311 ti,hwmods = "timer1";
315 timer2: timer@48040000 {
316 compatible = "ti,dm816-timer";
317 reg = <0x48040000 0x2000>;
319 ti,hwmods = "timer2";
322 timer3: timer@48042000 {
323 compatible = "ti,dm816-timer";
324 reg = <0x48042000 0x2000>;
326 ti,hwmods = "timer3";
329 timer4: timer@48044000 {
330 compatible = "ti,dm816-timer";
331 reg = <0x48044000 0x2000>;
333 ti,hwmods = "timer4";
337 timer5: timer@48046000 {
338 compatible = "ti,dm816-timer";
339 reg = <0x48046000 0x2000>;
341 ti,hwmods = "timer5";
345 timer6: timer@48048000 {
346 compatible = "ti,dm816-timer";
347 reg = <0x48048000 0x2000>;
349 ti,hwmods = "timer6";
353 timer7: timer@4804a000 {
354 compatible = "ti,dm816-timer";
355 reg = <0x4804a000 0x2000>;
357 ti,hwmods = "timer7";
361 uart1: uart@48020000 {
362 compatible = "ti,omap3-uart";
364 reg = <0x48020000 0x2000>;
365 clock-frequency = <48000000>;
367 dmas = <&edma 26 &edma 27>;
368 dma-names = "tx", "rx";
371 uart2: uart@48022000 {
372 compatible = "ti,omap3-uart";
374 reg = <0x48022000 0x2000>;
375 clock-frequency = <48000000>;
377 dmas = <&edma 28 &edma 29>;
378 dma-names = "tx", "rx";
381 uart3: uart@48024000 {
382 compatible = "ti,omap3-uart";
384 reg = <0x48024000 0x2000>;
385 clock-frequency = <48000000>;
387 dmas = <&edma 30 &edma 31>;
388 dma-names = "tx", "rx";
391 /* NOTE: USB needs a transceiver driver for phys to work */
392 usb: usb_otg_hs@47401000 {
393 compatible = "ti,am33xx-usb";
394 reg = <0x47401000 0x400000>;
396 #address-cells = <1>;
398 ti,hwmods = "usb_otg_hs";
401 compatible = "ti,musb-dm816";
402 reg = <0x47401400 0x400
404 reg-names = "mc", "control";
406 interrupt-names = "mc";
408 interface-type = <0>;
410 phy-names = "usb2-phy";
411 mentor,multipoint = <1>;
412 mentor,num-eps = <16>;
413 mentor,ram-bits = <12>;
414 mentor,power = <500>;
416 dmas = <&cppi41dma 0 0 &cppi41dma 1 0
417 &cppi41dma 2 0 &cppi41dma 3 0
418 &cppi41dma 4 0 &cppi41dma 5 0
419 &cppi41dma 6 0 &cppi41dma 7 0
420 &cppi41dma 8 0 &cppi41dma 9 0
421 &cppi41dma 10 0 &cppi41dma 11 0
422 &cppi41dma 12 0 &cppi41dma 13 0
423 &cppi41dma 14 0 &cppi41dma 0 1
424 &cppi41dma 1 1 &cppi41dma 2 1
425 &cppi41dma 3 1 &cppi41dma 4 1
426 &cppi41dma 5 1 &cppi41dma 6 1
427 &cppi41dma 7 1 &cppi41dma 8 1
428 &cppi41dma 9 1 &cppi41dma 10 1
429 &cppi41dma 11 1 &cppi41dma 12 1
430 &cppi41dma 13 1 &cppi41dma 14 1>;
432 "rx1", "rx2", "rx3", "rx4", "rx5", "rx6", "rx7",
433 "rx8", "rx9", "rx10", "rx11", "rx12", "rx13",
435 "tx1", "tx2", "tx3", "tx4", "tx5", "tx6", "tx7",
436 "tx8", "tx9", "tx10", "tx11", "tx12", "tx13",
441 compatible = "ti,musb-dm816";
442 reg = <0x47401c00 0x400
444 reg-names = "mc", "control";
446 interrupt-names = "mc";
448 interface-type = <0>;
450 phy-names = "usb2-phy";
451 mentor,multipoint = <1>;
452 mentor,num-eps = <16>;
453 mentor,ram-bits = <12>;
454 mentor,power = <500>;
456 dmas = <&cppi41dma 15 0 &cppi41dma 16 0
457 &cppi41dma 17 0 &cppi41dma 18 0
458 &cppi41dma 19 0 &cppi41dma 20 0
459 &cppi41dma 21 0 &cppi41dma 22 0
460 &cppi41dma 23 0 &cppi41dma 24 0
461 &cppi41dma 25 0 &cppi41dma 26 0
462 &cppi41dma 27 0 &cppi41dma 28 0
463 &cppi41dma 29 0 &cppi41dma 15 1
464 &cppi41dma 16 1 &cppi41dma 17 1
465 &cppi41dma 18 1 &cppi41dma 19 1
466 &cppi41dma 20 1 &cppi41dma 21 1
467 &cppi41dma 22 1 &cppi41dma 23 1
468 &cppi41dma 24 1 &cppi41dma 25 1
469 &cppi41dma 26 1 &cppi41dma 27 1
470 &cppi41dma 28 1 &cppi41dma 29 1>;
472 "rx1", "rx2", "rx3", "rx4", "rx5", "rx6", "rx7",
473 "rx8", "rx9", "rx10", "rx11", "rx12", "rx13",
475 "tx1", "tx2", "tx3", "tx4", "tx5", "tx6", "tx7",
476 "tx8", "tx9", "tx10", "tx11", "tx12", "tx13",
480 cppi41dma: dma-controller@47402000 {
481 compatible = "ti,am3359-cppi41";
482 reg = <0x47400000 0x1000
486 reg-names = "glue", "controller", "scheduler", "queuemgr";
488 interrupt-names = "glue";
490 #dma-channels = <30>;
491 #dma-requests = <256>;
495 wd_timer2: wd_timer@480c2000 {
496 compatible = "ti,omap3-wdt";
497 ti,hwmods = "wd_timer";
498 reg = <0x480c2000 0x1000>;
504 #include "dm816x-clocks.dtsi"