arch/arm/boot/dts/dra62x-j5eco-evm.dts

   1 /*
   2  * This program is free software; you can redistribute it and/or modify
   3  * it under the terms of the GNU General Public License version 2 as
   4  * published by the Free Software Foundation.
   5  */
   6 /dts-v1/;
   7
   8 #include "dra62x.dtsi"
   9
  10 / {
  11         model = "DRA62x J5 Eco EVM";
  12         compatible = "ti,dra62x-j5eco-evm", "ti,dra62x", "ti,dm8148";
  13
  14         memory {
  15                 device_type = "memory";
  16                 reg = <0x80000000 0x40000000>;  /* 1 GB */
  17         };
  18
  19         /* MIC94060YC6 controlled by SD1_POW pin */
  20         vmmcsd_fixed: fixedregulator@0 {
  21                 compatible = "regulator-fixed";
  22                 regulator-name = "vmmcsd_fixed";
  23                 regulator-min-microvolt = <3300000>;
  24                 regulator-max-microvolt = <3300000>;
  25         };
  26 };
  27
  28 &cpsw_emac0 {
  29         phy_id = <&davinci_mdio>, <0>;
  30         phy-mode = "rgmii";
  31 };
  32
  33 &cpsw_emac1 {
  34         phy_id = <&davinci_mdio>, <1>;
  35         phy-mode = "rgmii";
  36 };
  37
  38 &mmc2 {
  39         pinctrl-names = "default";
  40         pinctrl-0 = <&sd1_pins>;
  41         vmmc-supply = <&vmmcsd_fixed>;
  42         bus-width = <4>;
  43         cd-gpios = <&gpio2 6 GPIO_ACTIVE_LOW>;
  44 };
  45
  46 &pincntl {
  47         sd1_pins: pinmux_sd1_pins {
  48                 pinctrl-single,pins = <
  49                         DM814X_IOPAD(0x0800, PIN_INPUT | 0x1)   /* SD1_CLK */
  50                         DM814X_IOPAD(0x0804, PIN_INPUT_PULLUP |  0x1)   /* SD1_CMD */
  51                         DM814X_IOPAD(0x0808, PIN_INPUT_PULLUP |  0x1)   /* SD1_DAT[0] */
  52                         DM814X_IOPAD(0x080c, PIN_INPUT_PULLUP |  0x1)   /* SD1_DAT[1] */
  53                         DM814X_IOPAD(0x0810, PIN_INPUT_PULLUP |  0x1)   /* SD1_DAT[2] */
  54                         DM814X_IOPAD(0x0814, PIN_INPUT_PULLUP |  0x1)   /* SD1_DAT[3] */
  55                         DM814X_IOPAD(0x0924, PIN_OUTPUT |  0x40)        /* SD1_POW */
  56                         DM814X_IOPAD(0x093C, PIN_INPUT_PULLUP |  0x80)  /* GP1[6] */
  57                         >;
  58         };
  59
  60         usb0_pins: pinmux_usb0_pins {
  61                 pinctrl-single,pins = <
  62                         DM814X_IOPAD(0x0c34, PIN_OUTPUT | 0x1)  /* USB0_DRVVBUS */
  63                         >;
  64         };
  65 };
  66
  67 /* USB0_ID pin state: SW10[1] = 0 cable detection, SW10[1] = 1 ID grounded */
  68 &usb0 {
  69         pinctrl-names = "default";
  70         pinctrl-0 = <&usb0_pins>;
  71         dr_mode = "otg";
  72 };
  73
  74 &usb1_phy {
  75         status = "disabled";
  76 };
  77
  78 &usb1 {
  79         status = "disabled";
  80 };