arch/arm/boot/dts/exynos4412-trats2.dts

   1 /*
   2  * Samsung's Exynos4412 based Trats 2 board device tree source
   3  *
   4  * Copyright (c) 2013 Samsung Electronics Co., Ltd.
   5  *              http://www.samsung.com
   6  *
   7  * Device tree source file for Samsung's Trats 2 board which is based on
   8  * Samsung's Exynos4412 SoC.
   9  *
  10  * This program is free software; you can redistribute it and/or modify
  11  * it under the terms of the GNU General Public License version 2 as
  12  * published by the Free Software Foundation.
  13 */
  14
  15 /dts-v1/;
  16 #include "exynos4412.dtsi"
  17 #include <dt-bindings/gpio/gpio.h>
  18 #include <dt-bindings/interrupt-controller/irq.h>
  19 #include <dt-bindings/clock/maxim,max77686.h>
  20
  21 / {
  22         model = "Samsung Trats 2 based on Exynos4412";
  23         compatible = "samsung,trats2", "samsung,exynos4412", "samsung,exynos4";
  24
  25         aliases {
  26                 i2c9 = &i2c_ak8975;
  27                 i2c10 = &i2c_cm36651;
  28                 i2c11 = &i2c_max77693;
  29                 i2c12 = &i2c_max77693_fuel;
  30         };
  31
  32         memory {
  33                 reg =  <0x40000000 0x40000000>;
  34         };
  35
  36         chosen {
  37                 bootargs = "console=ttySAC2,115200N8 root=/dev/mmcblk0p5 rootwait earlyprintk panic=5";
  38                 stdout-path = &serial_2;
  39         };
  40
  41         firmware@0204F000 {
  42                 compatible = "samsung,secure-firmware";
  43                 reg = <0x0204F000 0x1000>;
  44         };
  45
  46         fixed-rate-clocks {
  47                 xxti {
  48                         compatible = "samsung,clock-xxti", "fixed-clock";
  49                         clock-frequency = <0>;
  50                 };
  51
  52                 xusbxti {
  53                         compatible = "samsung,clock-xusbxti", "fixed-clock";
  54                         clock-frequency = <24000000>;
  55                 };
  56         };
  57
  58         regulators {
  59                 compatible = "simple-bus";
  60                 #address-cells = <1>;
  61                 #size-cells = <0>;
  62
  63                 cam_io_reg: voltage-regulator-1 {
  64                         compatible = "regulator-fixed";
  65                         regulator-name = "CAM_SENSOR_A";
  66                         regulator-min-microvolt = <2800000>;
  67                         regulator-max-microvolt = <2800000>;
  68                         gpio = <&gpm0 2 0>;
  69                         enable-active-high;
  70                 };
  71
  72                 lcd_vdd3_reg: voltage-regulator-2 {
  73                         compatible = "regulator-fixed";
  74                         regulator-name = "LCD_VDD_2.2V";
  75                         regulator-min-microvolt = <2200000>;
  76                         regulator-max-microvolt = <2200000>;
  77                         gpio = <&gpc0 1 0>;
  78                         enable-active-high;
  79                 };
  80
  81                 cam_af_reg: voltage-regulator-3 {
  82                         compatible = "regulator-fixed";
  83                         regulator-name = "CAM_AF";
  84                         regulator-min-microvolt = <2800000>;
  85                         regulator-max-microvolt = <2800000>;
  86                         gpio = <&gpm0 4 0>;
  87                         enable-active-high;
  88                 };
  89
  90                 ps_als_reg: voltage-regulator-5 {
  91                         compatible = "regulator-fixed";
  92                         regulator-name = "LED_A_3.0V";
  93                         regulator-min-microvolt = <3000000>;
  94                         regulator-max-microvolt = <3000000>;
  95                         gpio = <&gpj0 5 0>;
  96                         enable-active-high;
  97                 };
  98         };
  99
 100         gpio-keys {
 101                 compatible = "gpio-keys";
 102
 103                 key-down {
 104                         gpios = <&gpx3 3 1>;
 105                         linux,code = <114>;
 106                         label = "volume down";
 107                         debounce-interval = <10>;
 108                 };
 109
 110                 key-up {
 111                         gpios = <&gpx2 2 1>;
 112                         linux,code = <115>;
 113                         label = "volume up";
 114                         debounce-interval = <10>;
 115                 };
 116
 117                 key-power {
 118                         gpios = <&gpx2 7 1>;
 119                         linux,code = <116>;
 120                         label = "power";
 121                         debounce-interval = <10>;
 122                         gpio-key,wakeup;
 123                 };
 124
 125                 key-ok {
 126                         gpios = <&gpx0 1 1>;
 127                         linux,code = <139>;
 128                         label = "ok";
 129                         debounce-inteval = <10>;
 130                         gpio-key,wakeup;
 131                 };
 132         };
 133
 134         i2c_max77693: i2c-gpio-1 {
 135                 compatible = "i2c-gpio";
 136                 gpios = <&gpm2 0 GPIO_ACTIVE_HIGH>, <&gpm2 1 GPIO_ACTIVE_HIGH>;
 137                 i2c-gpio,delay-us = <2>;
 138                 #address-cells = <1>;
 139                 #size-cells = <0>;
 140                 status = "okay";
 141
 142                 max77693@66 {
 143                         compatible = "maxim,max77693";
 144                         interrupt-parent = <&gpx1>;
 145                         interrupts = <5 2>;
 146                         reg = <0x66>;
 147
 148                         regulators {
 149                                 esafeout1_reg: ESAFEOUT1@1 {
 150                                         regulator-name = "ESAFEOUT1";
 151                                 };
 152                                 esafeout2_reg: ESAFEOUT2@2 {
 153                                         regulator-name = "ESAFEOUT2";
 154                                 };
 155                                 charger_reg: CHARGER@0 {
 156                                         regulator-name = "CHARGER";
 157                                         regulator-min-microamp = <60000>;
 158                                         regulator-max-microamp = <2580000>;
 159                                 };
 160                         };
 161
 162                         max77693_haptic {
 163                                 compatible = "maxim,max77693-haptic";
 164                                 haptic-supply = <&ldo26_reg>;
 165                                 pwms = <&pwm 0 38022 0>;
 166                         };
 167
 168                         charger {
 169                                 compatible = "maxim,max77693-charger";
 170
 171                                 maxim,constant-microvolt = <4350000>;
 172                                 maxim,min-system-microvolt = <3600000>;
 173                                 maxim,thermal-regulation-celsius = <100>;
 174                                 maxim,battery-overcurrent-microamp = <3500000>;
 175                                 maxim,charge-input-threshold-microvolt = <4300000>;
 176                         };
 177                 };
 178         };
 179
 180         i2c_max77693_fuel: i2c-gpio-3 {
 181                 compatible = "i2c-gpio";
 182                 gpios = <&gpf1 5 GPIO_ACTIVE_HIGH>, <&gpf1 4 GPIO_ACTIVE_HIGH>;
 183                 i2c-gpio,delay-us = <2>;
 184                 #address-cells = <1>;
 185                 #size-cells = <0>;
 186                 status = "okay";
 187
 188                 max77693-fuel-gauge@36 {
 189                         compatible = "maxim,max17047";
 190                         interrupt-parent = <&gpx2>;
 191                         interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
 192                         reg = <0x36>;
 193
 194                         maxim,over-heat-temp = <700>;
 195                         maxim,over-volt = <4500>;
 196                 };
 197         };
 198
 199         i2c_ak8975: i2c-gpio-0 {
 200                 compatible = "i2c-gpio";
 201                 gpios = <&gpy2 4 0>, <&gpy2 5 0>;
 202                 i2c-gpio,delay-us = <2>;
 203                 #address-cells = <1>;
 204                 #size-cells = <0>;
 205                 status = "okay";
 206
 207                 ak8975@0c {
 208                         compatible = "asahi-kasei,ak8975";
 209                         reg = <0x0c>;
 210                         gpios = <&gpj0 7 0>;
 211                 };
 212         };
 213
 214         i2c_cm36651: i2c-gpio-2 {
 215                 compatible = "i2c-gpio";
 216                 gpios = <&gpf0 0 1>, <&gpf0 1 1>;
 217                 i2c-gpio,delay-us = <2>;
 218                 #address-cells = <1>;
 219                 #size-cells = <0>;
 220
 221                 cm36651@18 {
 222                         compatible = "capella,cm36651";
 223                         reg = <0x18>;
 224                         interrupt-parent = <&gpx0>;
 225                         interrupts = <2 2>;
 226                         vled-supply = <&ps_als_reg>;
 227                 };
 228         };
 229
 230         camera: camera {
 231                 pinctrl-0 = <&cam_port_a_clk_active &cam_port_b_clk_active>;
 232                 pinctrl-names = "default";
 233                 status = "okay";
 234                 assigned-clocks = <&clock CLK_MOUT_CAM0>,
 235                                   <&clock CLK_MOUT_CAM1>;
 236                 assigned-clock-parents = <&clock CLK_XUSBXTI>,
 237                                          <&clock CLK_XUSBXTI>;
 238
 239
 240         };
 241
 242         sound {
 243                 compatible = "samsung,trats2-audio";
 244                 samsung,i2s-controller = <&i2s0>;
 245                 samsung,model = "Trats2";
 246                 samsung,audio-codec = <&wm1811>;
 247                 samsung,audio-routing =
 248                         "SPK", "SPKOUTLN",
 249                         "SPK", "SPKOUTLP",
 250                         "SPK", "SPKOUTRN",
 251                         "SPK", "SPKOUTRP";
 252         };
 253
 254         thermistor-ap@0 {
 255                 compatible = "ntc,ncp15wb473";
 256                 pullup-uv = <1800000>;   /* VCC_1.8V_AP */
 257                 pullup-ohm = <100000>;   /* 100K */
 258                 pulldown-ohm = <100000>; /* 100K */
 259                 io-channels = <&adc 1>;  /* AP temperature */
 260         };
 261
 262         thermistor-battery@1 {
 263                 compatible = "ntc,ncp15wb473";
 264                 pullup-uv = <1800000>;   /* VCC_1.8V_AP */
 265                 pullup-ohm = <100000>;   /* 100K */
 266                 pulldown-ohm = <100000>; /* 100K */
 267                 io-channels = <&adc 2>;  /* Battery temperature */
 268         };
 269
 270         thermal-zones {
 271                 cpu_thermal: cpu-thermal {
 272                         cooling-maps {
 273                                 map0 {
 274                                      /* Corresponds to 800MHz at freq_table */
 275                                      cooling-device = <&cpu0 7 7>;
 276                                 };
 277                                 map1 {
 278                                      /* Corresponds to 200MHz at freq_table */
 279                                      cooling-device = <&cpu0 13 13>;
 280                                };
 281                        };
 282                 };
 283         };
 284 };
 285
 286 &adc {
 287         vdd-supply = <&ldo3_reg>;
 288         status = "okay";
 289 };
 290
 291 &csis_0 {
 292         status = "okay";
 293         vddcore-supply = <&ldo8_reg>;
 294         vddio-supply = <&ldo10_reg>;
 295         assigned-clocks = <&clock CLK_MOUT_CSIS0>,
 296                         <&clock CLK_SCLK_CSIS0>;
 297         assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
 298         assigned-clock-rates = <0>, <176000000>;
 299
 300         /* Camera C (3) MIPI CSI-2 (CSIS0) */
 301         port@3 {
 302                 reg = <3>;
 303                 csis0_ep: endpoint {
 304                         remote-endpoint = <&s5c73m3_ep>;
 305                         data-lanes = <1 2 3 4>;
 306                         samsung,csis-hs-settle = <12>;
 307                 };
 308         };
 309 };
 310
 311 &csis_1 {
 312         status = "okay";
 313         vddcore-supply = <&ldo8_reg>;
 314         vddio-supply = <&ldo10_reg>;
 315         assigned-clocks = <&clock CLK_MOUT_CSIS1>,
 316                         <&clock CLK_SCLK_CSIS1>;
 317         assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
 318         assigned-clock-rates = <0>, <176000000>;
 319
 320         /* Camera D (4) MIPI CSI-2 (CSIS1) */
 321         port@4 {
 322                 reg = <4>;
 323                 csis1_ep: endpoint {
 324                         remote-endpoint = <&is_s5k6a3_ep>;
 325                         data-lanes = <1>;
 326                         samsung,csis-hs-settle = <18>;
 327                         samsung,csis-wclk;
 328                 };
 329         };
 330 };
 331
 332 &dsi_0 {
 333         vddcore-supply = <&ldo8_reg>;
 334         vddio-supply = <&ldo10_reg>;
 335         samsung,pll-clock-frequency = <24000000>;
 336         status = "okay";
 337
 338         ports {
 339                 #address-cells = <1>;
 340                 #size-cells = <0>;
 341
 342                 port@1 {
 343                         reg = <1>;
 344
 345                         dsi_out: endpoint {
 346                                 remote-endpoint = <&dsi_in>;
 347                                 samsung,burst-clock-frequency = <500000000>;
 348                                 samsung,esc-clock-frequency = <20000000>;
 349                         };
 350                 };
 351         };
 352
 353         panel@0 {
 354                 compatible = "samsung,s6e8aa0";
 355                 reg = <0>;
 356                 vdd3-supply = <&lcd_vdd3_reg>;
 357                 vci-supply = <&ldo25_reg>;
 358                 reset-gpios = <&gpy4 5 0>;
 359                 power-on-delay= <50>;
 360                 reset-delay = <100>;
 361                 init-delay = <100>;
 362                 flip-horizontal;
 363                 flip-vertical;
 364                 panel-width-mm = <58>;
 365                 panel-height-mm = <103>;
 366
 367                 display-timings {
 368                         timing-0 {
 369                                 clock-frequency = <57153600>;
 370                                 hactive = <720>;
 371                                 vactive = <1280>;
 372                                 hfront-porch = <5>;
 373                                 hback-porch = <5>;
 374                                 hsync-len = <5>;
 375                                 vfront-porch = <13>;
 376                                 vback-porch = <1>;
 377                                 vsync-len = <2>;
 378                         };
 379                 };
 380
 381                 port {
 382                         dsi_in: endpoint {
 383                                 remote-endpoint = <&dsi_out>;
 384                         };
 385                 };
 386         };
 387 };
 388
 389 &exynos_usbphy {
 390         status = "okay";
 391 };
 392
 393 &fimc_0 {
 394         status = "okay";
 395         assigned-clocks = <&clock CLK_MOUT_FIMC0>,
 396                         <&clock CLK_SCLK_FIMC0>;
 397         assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
 398         assigned-clock-rates = <0>, <176000000>;
 399 };
 400
 401 &fimc_1 {
 402         status = "okay";
 403         assigned-clocks = <&clock CLK_MOUT_FIMC1>,
 404                         <&clock CLK_SCLK_FIMC1>;
 405         assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
 406         assigned-clock-rates = <0>, <176000000>;
 407 };
 408
 409 &fimc_2 {
 410         status = "okay";
 411         assigned-clocks = <&clock CLK_MOUT_FIMC2>,
 412                         <&clock CLK_SCLK_FIMC2>;
 413         assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
 414         assigned-clock-rates = <0>, <176000000>;
 415 };
 416
 417 &fimc_3 {
 418         status = "okay";
 419         assigned-clocks = <&clock CLK_MOUT_FIMC3>,
 420                         <&clock CLK_SCLK_FIMC3>;
 421         assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
 422         assigned-clock-rates = <0>, <176000000>;
 423 };
 424
 425 &fimc_is {
 426         pinctrl-0 = <&fimc_is_uart>;
 427         pinctrl-names = "default";
 428         status = "okay";
 429
 430         i2c1_isp: i2c-isp@12140000 {
 431                 pinctrl-0 = <&fimc_is_i2c1>;
 432                 pinctrl-names = "default";
 433
 434                 s5k6a3@10 {
 435                         compatible = "samsung,s5k6a3";
 436                         reg = <0x10>;
 437                         svdda-supply = <&cam_io_reg>;
 438                         svddio-supply = <&ldo19_reg>;
 439                         afvdd-supply = <&ldo19_reg>;
 440                         clock-frequency = <24000000>;
 441                         /* CAM_B_CLKOUT */
 442                         clocks = <&camera 1>;
 443                         clock-names = "extclk";
 444                         samsung,camclk-out = <1>;
 445                         gpios = <&gpm1 6 0>;
 446
 447                         port {
 448                                 is_s5k6a3_ep: endpoint {
 449                                         remote-endpoint = <&csis1_ep>;
 450                                         data-lanes = <1>;
 451                                 };
 452                         };
 453                 };
 454         };
 455 };
 456
 457 &fimc_lite_0 {
 458         status = "okay";
 459 };
 460
 461 &fimc_lite_1 {
 462         status = "okay";
 463 };
 464
 465 &fimd {
 466         status = "okay";
 467 };
 468
 469 &hsotg {
 470         vusb_d-supply = <&ldo15_reg>;
 471         vusb_a-supply = <&ldo12_reg>;
 472         dr_mode = "peripheral";
 473         status = "okay";
 474 };
 475
 476 &i2c_0 {
 477         samsung,i2c-sda-delay = <100>;
 478         samsung,i2c-slave-addr = <0x10>;
 479         samsung,i2c-max-bus-freq = <400000>;
 480         pinctrl-0 = <&i2c0_bus>;
 481         pinctrl-names = "default";
 482         status = "okay";
 483
 484         s5c73m3@3c {
 485                 compatible = "samsung,s5c73m3";
 486                 reg = <0x3c>;
 487                 standby-gpios = <&gpm0 1 1>;   /* ISP_STANDBY */
 488                 xshutdown-gpios = <&gpf1 3 1>; /* ISP_RESET */
 489                 vdd-int-supply = <&buck9_reg>;
 490                 vddio-cis-supply = <&ldo9_reg>;
 491                 vdda-supply = <&ldo17_reg>;
 492                 vddio-host-supply = <&ldo18_reg>;
 493                 vdd-af-supply = <&cam_af_reg>;
 494                 vdd-reg-supply = <&cam_io_reg>;
 495                 clock-frequency = <24000000>;
 496                 /* CAM_A_CLKOUT */
 497                 clocks = <&camera 0>;
 498                 clock-names = "cis_extclk";
 499                 port {
 500                         s5c73m3_ep: endpoint {
 501                                 remote-endpoint = <&csis0_ep>;
 502                                 data-lanes = <1 2 3 4>;
 503                         };
 504                 };
 505         };
 506 };
 507
 508 &i2c_3 {
 509         samsung,i2c-sda-delay = <100>;
 510         samsung,i2c-slave-addr = <0x10>;
 511         samsung,i2c-max-bus-freq = <400000>;
 512         pinctrl-0 = <&i2c3_bus>;
 513         pinctrl-names = "default";
 514         status = "okay";
 515
 516         mms114-touchscreen@48 {
 517                 compatible = "melfas,mms114";
 518                 reg = <0x48>;
 519                 interrupt-parent = <&gpm2>;
 520                 interrupts = <3 2>;
 521                 x-size = <720>;
 522                 y-size = <1280>;
 523                 avdd-supply = <&ldo23_reg>;
 524                 vdd-supply = <&ldo24_reg>;
 525         };
 526 };
 527
 528 &i2c_4 {
 529         samsung,i2c-sda-delay = <100>;
 530         samsung,i2c-slave-addr = <0x10>;
 531         samsung,i2c-max-bus-freq = <100000>;
 532         pinctrl-0 = <&i2c4_bus>;
 533         pinctrl-names = "default";
 534         status = "okay";
 535
 536         wm1811: wm1811@1a {
 537                 compatible = "wlf,wm1811";
 538                 reg = <0x1a>;
 539                 clocks = <&pmu_system_controller 0>;
 540                 clock-names = "MCLK1";
 541                 DCVDD-supply = <&ldo3_reg>;
 542                 DBVDD1-supply = <&ldo3_reg>;
 543                 wlf,ldo1ena = <&gpj0 4 0>;
 544         };
 545 };
 546
 547 &i2c_7 {
 548         samsung,i2c-sda-delay = <100>;
 549         samsung,i2c-slave-addr = <0x10>;
 550         samsung,i2c-max-bus-freq = <100000>;
 551         pinctrl-0 = <&i2c7_bus>;
 552         pinctrl-names = "default";
 553         status = "okay";
 554
 555         max77686: max77686_pmic@09 {
 556                 compatible = "maxim,max77686";
 557                 interrupt-parent = <&gpx0>;
 558                 interrupts = <7 0>;
 559                 reg = <0x09>;
 560                 #clock-cells = <1>;
 561
 562                 voltage-regulators {
 563                         ldo1_reg: ldo1 {
 564                                 regulator-compatible = "LDO1";
 565                                 regulator-name = "VALIVE_1.0V_AP";
 566                                 regulator-min-microvolt = <1000000>;
 567                                 regulator-max-microvolt = <1000000>;
 568                                 regulator-always-on;
 569                         };
 570
 571                         ldo2_reg: ldo2 {
 572                                 regulator-compatible = "LDO2";
 573                                 regulator-name = "VM1M2_1.2V_AP";
 574                                 regulator-min-microvolt = <1200000>;
 575                                 regulator-max-microvolt = <1200000>;
 576                                 regulator-always-on;
 577                                 regulator-state-mem {
 578                                         regulator-on-in-suspend;
 579                                 };
 580                         };
 581
 582                         ldo3_reg: ldo3 {
 583                                 regulator-compatible = "LDO3";
 584                                 regulator-name = "VCC_1.8V_AP";
 585                                 regulator-min-microvolt = <1800000>;
 586                                 regulator-max-microvolt = <1800000>;
 587                                 regulator-always-on;
 588                         };
 589
 590                         ldo4_reg: ldo4 {
 591                                 regulator-compatible = "LDO4";
 592                                 regulator-name = "VCC_2.8V_AP";
 593                                 regulator-min-microvolt = <2800000>;
 594                                 regulator-max-microvolt = <2800000>;
 595                                 regulator-always-on;
 596                         };
 597
 598                         ldo5_reg: ldo5 {
 599                                 regulator-compatible = "LDO5";
 600                                 regulator-name = "VCC_1.8V_IO";
 601                                 regulator-min-microvolt = <1800000>;
 602                                 regulator-max-microvolt = <1800000>;
 603                                 regulator-always-on;
 604                         };
 605
 606                         ldo6_reg: ldo6 {
 607                                 regulator-compatible = "LDO6";
 608                                 regulator-name = "VMPLL_1.0V_AP";
 609                                 regulator-min-microvolt = <1000000>;
 610                                 regulator-max-microvolt = <1000000>;
 611                                 regulator-always-on;
 612                                 regulator-state-mem {
 613                                         regulator-on-in-suspend;
 614                                 };
 615                         };
 616
 617                         ldo7_reg: ldo7 {
 618                                 regulator-compatible = "LDO7";
 619                                 regulator-name = "VPLL_1.0V_AP";
 620                                 regulator-min-microvolt = <1000000>;
 621                                 regulator-max-microvolt = <1000000>;
 622                                 regulator-always-on;
 623                                 regulator-state-mem {
 624                                         regulator-on-in-suspend;
 625                                 };
 626                         };
 627
 628                         ldo8_reg: ldo8 {
 629                                 regulator-compatible = "LDO8";
 630                                 regulator-name = "VMIPI_1.0V";
 631                                 regulator-min-microvolt = <1000000>;
 632                                 regulator-max-microvolt = <1000000>;
 633                                 regulator-state-mem {
 634                                         regulator-off-in-suspend;
 635                                 };
 636                         };
 637
 638                         ldo9_reg: ldo9 {
 639                                 regulator-compatible = "LDO9";
 640                                 regulator-name = "CAM_ISP_MIPI_1.2V";
 641                                 regulator-min-microvolt = <1200000>;
 642                                 regulator-max-microvolt = <1200000>;
 643                         };
 644
 645                         ldo10_reg: ldo10 {
 646                                 regulator-compatible = "LDO10";
 647                                 regulator-name = "VMIPI_1.8V";
 648                                 regulator-min-microvolt = <1800000>;
 649                                 regulator-max-microvolt = <1800000>;
 650                                 regulator-state-mem {
 651                                         regulator-off-in-suspend;
 652                                 };
 653                         };
 654
 655                         ldo11_reg: ldo11 {
 656                                 regulator-compatible = "LDO11";
 657                                 regulator-name = "VABB1_1.95V";
 658                                 regulator-min-microvolt = <1950000>;
 659                                 regulator-max-microvolt = <1950000>;
 660                                 regulator-always-on;
 661                                 regulator-state-mem {
 662                                         regulator-off-in-suspend;
 663                                 };
 664                         };
 665
 666                         ldo12_reg: ldo12 {
 667                                 regulator-compatible = "LDO12";
 668                                 regulator-name = "VUOTG_3.0V";
 669                                 regulator-min-microvolt = <3000000>;
 670                                 regulator-max-microvolt = <3000000>;
 671                                 regulator-state-mem {
 672                                         regulator-off-in-suspend;
 673                                 };
 674                         };
 675
 676                         ldo13_reg: ldo13 {
 677                                 regulator-compatible = "LDO13";
 678                                 regulator-name = "NFC_AVDD_1.8V";
 679                                 regulator-min-microvolt = <1800000>;
 680                                 regulator-max-microvolt = <1800000>;
 681                         };
 682
 683                         ldo14_reg: ldo14 {
 684                                 regulator-compatible = "LDO14";
 685                                 regulator-name = "VABB2_1.95V";
 686                                 regulator-min-microvolt = <1950000>;
 687                                 regulator-max-microvolt = <1950000>;
 688                                 regulator-always-on;
 689                                 regulator-state-mem {
 690                                         regulator-off-in-suspend;
 691                                 };
 692                         };
 693
 694                         ldo15_reg: ldo15 {
 695                                 regulator-compatible = "LDO15";
 696                                 regulator-name = "VHSIC_1.0V";
 697                                 regulator-min-microvolt = <1000000>;
 698                                 regulator-max-microvolt = <1000000>;
 699                                 regulator-state-mem {
 700                                         regulator-on-in-suspend;
 701                                 };
 702                         };
 703
 704                         ldo16_reg: ldo16 {
 705                                 regulator-compatible = "LDO16";
 706                                 regulator-name = "VHSIC_1.8V";
 707                                 regulator-min-microvolt = <1800000>;
 708                                 regulator-max-microvolt = <1800000>;
 709                                 regulator-state-mem {
 710                                         regulator-on-in-suspend;
 711                                 };
 712                         };
 713
 714                         ldo17_reg: ldo17 {
 715                                 regulator-compatible = "LDO17";
 716                                 regulator-name = "CAM_SENSOR_CORE_1.2V";
 717                                 regulator-min-microvolt = <1200000>;
 718                                 regulator-max-microvolt = <1200000>;
 719                         };
 720
 721                         ldo18_reg: ldo18 {
 722                                 regulator-compatible = "LDO18";
 723                                 regulator-name = "CAM_ISP_SEN_IO_1.8V";
 724                                 regulator-min-microvolt = <1800000>;
 725                                 regulator-max-microvolt = <1800000>;
 726                         };
 727
 728                         ldo19_reg: ldo19 {
 729                                 regulator-compatible = "LDO19";
 730                                 regulator-name = "VT_CAM_1.8V";
 731                                 regulator-min-microvolt = <1800000>;
 732                                 regulator-max-microvolt = <1800000>;
 733                         };
 734
 735                         ldo20_reg: ldo20 {
 736                                 regulator-compatible = "LDO20";
 737                                 regulator-name = "VDDQ_PRE_1.8V";
 738                                 regulator-min-microvolt = <1800000>;
 739                                 regulator-max-microvolt = <1800000>;
 740                         };
 741
 742                         ldo21_reg: ldo21 {
 743                                 regulator-compatible = "LDO21";
 744                                 regulator-name = "VTF_2.8V";
 745                                 regulator-min-microvolt = <2800000>;
 746                                 regulator-max-microvolt = <2800000>;
 747                                 maxim,ena-gpios = <&gpy2 0 GPIO_ACTIVE_HIGH>;
 748                         };
 749
 750                         ldo22_reg: ldo22 {
 751                                 regulator-compatible = "LDO22";
 752                                 regulator-name = "VMEM_VDD_2.8V";
 753                                 regulator-min-microvolt = <2800000>;
 754                                 regulator-max-microvolt = <2800000>;
 755                                 maxim,ena-gpios = <&gpk0 2 GPIO_ACTIVE_HIGH>;
 756                         };
 757
 758                         ldo23_reg: ldo23 {
 759                                 regulator-compatible = "LDO23";
 760                                 regulator-name = "TSP_AVDD_3.3V";
 761                                 regulator-min-microvolt = <3300000>;
 762                                 regulator-max-microvolt = <3300000>;
 763                         };
 764
 765                         ldo24_reg: ldo24 {
 766                                 regulator-compatible = "LDO24";
 767                                 regulator-name = "TSP_VDD_1.8V";
 768                                 regulator-min-microvolt = <1800000>;
 769                                 regulator-max-microvolt = <1800000>;
 770                         };
 771
 772                         ldo25_reg: ldo25 {
 773                                 regulator-compatible = "LDO25";
 774                                 regulator-name = "LCD_VCC_3.3V";
 775                                 regulator-min-microvolt = <2800000>;
 776                                 regulator-max-microvolt = <2800000>;
 777                         };
 778
 779                         ldo26_reg: ldo26 {
 780                                 regulator-compatible = "LDO26";
 781                                 regulator-name = "MOTOR_VCC_3.0V";
 782                                 regulator-min-microvolt = <3000000>;
 783                                 regulator-max-microvolt = <3000000>;
 784                         };
 785
 786                         buck1_reg: buck1 {
 787                                 regulator-compatible = "BUCK1";
 788                                 regulator-name = "vdd_mif";
 789                                 regulator-min-microvolt = <850000>;
 790                                 regulator-max-microvolt = <1100000>;
 791                                 regulator-always-on;
 792                                 regulator-boot-on;
 793                                 regulator-state-mem {
 794                                         regulator-off-in-suspend;
 795                                 };
 796                         };
 797
 798                         buck2_reg: buck2 {
 799                                 regulator-compatible = "BUCK2";
 800                                 regulator-name = "vdd_arm";
 801                                 regulator-min-microvolt = <850000>;
 802                                 regulator-max-microvolt = <1500000>;
 803                                 regulator-always-on;
 804                                 regulator-boot-on;
 805                                 regulator-state-mem {
 806                                         regulator-on-in-suspend;
 807                                 };
 808                         };
 809
 810                         buck3_reg: buck3 {
 811                                 regulator-compatible = "BUCK3";
 812                                 regulator-name = "vdd_int";
 813                                 regulator-min-microvolt = <850000>;
 814                                 regulator-max-microvolt = <1150000>;
 815                                 regulator-always-on;
 816                                 regulator-boot-on;
 817                                 regulator-state-mem {
 818                                         regulator-off-in-suspend;
 819                                 };
 820                         };
 821
 822                         buck4_reg: buck4 {
 823                                 regulator-compatible = "BUCK4";
 824                                 regulator-name = "vdd_g3d";
 825                                 regulator-min-microvolt = <850000>;
 826                                 regulator-max-microvolt = <1150000>;
 827                                 regulator-boot-on;
 828                                 regulator-state-mem {
 829                                         regulator-off-in-suspend;
 830                                 };
 831                         };
 832
 833                         buck5_reg: buck5 {
 834                                 regulator-compatible = "BUCK5";
 835                                 regulator-name = "VMEM_1.2V_AP";
 836                                 regulator-min-microvolt = <1200000>;
 837                                 regulator-max-microvolt = <1200000>;
 838                                 regulator-always-on;
 839                         };
 840
 841                         buck6_reg: buck6 {
 842                                 regulator-compatible = "BUCK6";
 843                                 regulator-name = "VCC_SUB_1.35V";
 844                                 regulator-min-microvolt = <1350000>;
 845                                 regulator-max-microvolt = <1350000>;
 846                                 regulator-always-on;
 847                         };
 848
 849                         buck7_reg: buck7 {
 850                                 regulator-compatible = "BUCK7";
 851                                 regulator-name = "VCC_SUB_2.0V";
 852                                 regulator-min-microvolt = <2000000>;
 853                                 regulator-max-microvolt = <2000000>;
 854                                 regulator-always-on;
 855                         };
 856
 857                         buck8_reg: buck8 {
 858                                 regulator-compatible = "BUCK8";
 859                                 regulator-name = "VMEM_VDDF_3.0V";
 860                                 regulator-min-microvolt = <2850000>;
 861                                 regulator-max-microvolt = <2850000>;
 862                                 maxim,ena-gpios = <&gpk0 2 GPIO_ACTIVE_HIGH>;
 863                         };
 864
 865                         buck9_reg: buck9 {
 866                                 regulator-compatible = "BUCK9";
 867                                 regulator-name = "CAM_ISP_CORE_1.2V";
 868                                 regulator-min-microvolt = <1000000>;
 869                                 regulator-max-microvolt = <1200000>;
 870                                 maxim,ena-gpios = <&gpm0 3 GPIO_ACTIVE_HIGH>;
 871                         };
 872                 };
 873         };
 874 };
 875
 876 &i2s0 {
 877         pinctrl-0 = <&i2s0_bus>;
 878         pinctrl-names = "default";
 879         status = "okay";
 880 };
 881
 882 &mshc_0 {
 883         num-slots = <1>;
 884         broken-cd;
 885         non-removable;
 886         card-detect-delay = <200>;
 887         vmmc-supply = <&ldo22_reg>;
 888         clock-frequency = <400000000>;
 889         samsung,dw-mshc-ciu-div = <0>;
 890         samsung,dw-mshc-sdr-timing = <2 3>;
 891         samsung,dw-mshc-ddr-timing = <1 2>;
 892         pinctrl-0 = <&sd4_clk &sd4_cmd &sd4_bus4 &sd4_bus8>;
 893         pinctrl-names = "default";
 894         status = "okay";
 895         bus-width = <8>;
 896         cap-mmc-highspeed;
 897 };
 898
 899 &pmu_system_controller {
 900         assigned-clocks = <&pmu_system_controller 0>;
 901         assigned-clock-parents =  <&clock CLK_XUSBXTI>;
 902 };
 903
 904 &ppmu_dmc0 {
 905         status = "okay";
 906
 907         events {
 908                 ppmu_dmc0_3: ppmu-event3-dmc0 {
 909                         event-name = "ppmu-event3-dmc0";
 910                 };
 911         };
 912 };
 913
 914 &ppmu_dmc1 {
 915         status = "okay";
 916
 917         events {
 918                 ppmu_dmc1_3: ppmu-event3-dmc1 {
 919                         event-name = "ppmu-event3-dmc1";
 920                 };
 921         };
 922 };
 923
 924 &ppmu_leftbus {
 925         status = "okay";
 926
 927         events {
 928                 ppmu_leftbus_3: ppmu-event3-leftbus {
 929                         event-name = "ppmu-event3-leftbus";
 930                 };
 931         };
 932 };
 933
 934 &ppmu_rightbus {
 935         status = "okay";
 936
 937         events {
 938                 ppmu_rightbus_3: ppmu-event3-rightbus {
 939                         event-name = "ppmu-event3-rightbus";
 940                 };
 941         };
 942 };
 943
 944 &pinctrl_0 {
 945         pinctrl-names = "default";
 946         pinctrl-0 = <&sleep0>;
 947
 948         sleep0: sleep-states {
 949                 PIN_SLP(gpa0-0, INPUT, NONE);
 950                 PIN_SLP(gpa0-1, OUT0, NONE);
 951                 PIN_SLP(gpa0-2, INPUT, NONE);
 952                 PIN_SLP(gpa0-3, INPUT, UP);
 953                 PIN_SLP(gpa0-4, INPUT, NONE);
 954                 PIN_SLP(gpa0-5, INPUT, DOWN);
 955                 PIN_SLP(gpa0-6, INPUT, DOWN);
 956                 PIN_SLP(gpa0-7, INPUT, UP);
 957
 958                 PIN_SLP(gpa1-0, INPUT, DOWN);
 959                 PIN_SLP(gpa1-1, INPUT, DOWN);
 960                 PIN_SLP(gpa1-2, INPUT, DOWN);
 961                 PIN_SLP(gpa1-3, INPUT, DOWN);
 962                 PIN_SLP(gpa1-4, INPUT, DOWN);
 963                 PIN_SLP(gpa1-5, INPUT, DOWN);
 964
 965                 PIN_SLP(gpb-0, INPUT, NONE);
 966                 PIN_SLP(gpb-1, INPUT, NONE);
 967                 PIN_SLP(gpb-2, INPUT, NONE);
 968                 PIN_SLP(gpb-3, INPUT, NONE);
 969                 PIN_SLP(gpb-4, INPUT, DOWN);
 970                 PIN_SLP(gpb-5, INPUT, UP);
 971                 PIN_SLP(gpb-6, INPUT, DOWN);
 972                 PIN_SLP(gpb-7, INPUT, DOWN);
 973
 974                 PIN_SLP(gpc0-0, INPUT, DOWN);
 975                 PIN_SLP(gpc0-1, INPUT, DOWN);
 976                 PIN_SLP(gpc0-2, INPUT, DOWN);
 977                 PIN_SLP(gpc0-3, INPUT, DOWN);
 978                 PIN_SLP(gpc0-4, INPUT, DOWN);
 979
 980                 PIN_SLP(gpc1-0, INPUT, NONE);
 981                 PIN_SLP(gpc1-1, PREV, NONE);
 982                 PIN_SLP(gpc1-2, INPUT, NONE);
 983                 PIN_SLP(gpc1-3, INPUT, NONE);
 984                 PIN_SLP(gpc1-4, INPUT, NONE);
 985
 986                 PIN_SLP(gpd0-0, INPUT, DOWN);
 987                 PIN_SLP(gpd0-1, INPUT, DOWN);
 988                 PIN_SLP(gpd0-2, INPUT, NONE);
 989                 PIN_SLP(gpd0-3, INPUT, NONE);
 990
 991                 PIN_SLP(gpd1-0, INPUT, DOWN);
 992                 PIN_SLP(gpd1-1, INPUT, DOWN);
 993                 PIN_SLP(gpd1-2, INPUT, NONE);
 994                 PIN_SLP(gpd1-3, INPUT, NONE);
 995
 996                 PIN_SLP(gpf0-0, INPUT, NONE);
 997                 PIN_SLP(gpf0-1, INPUT, NONE);
 998                 PIN_SLP(gpf0-2, INPUT, DOWN);
 999                 PIN_SLP(gpf0-3, INPUT, DOWN);
1000                 PIN_SLP(gpf0-4, INPUT, NONE);
1001                 PIN_SLP(gpf0-5, INPUT, DOWN);
1002                 PIN_SLP(gpf0-6, INPUT, NONE);
1003                 PIN_SLP(gpf0-7, INPUT, DOWN);
1004
1005                 PIN_SLP(gpf1-0, INPUT, DOWN);
1006                 PIN_SLP(gpf1-1, INPUT, DOWN);
1007                 PIN_SLP(gpf1-2, INPUT, DOWN);
1008                 PIN_SLP(gpf1-3, INPUT, DOWN);
1009                 PIN_SLP(gpf1-4, INPUT, NONE);
1010                 PIN_SLP(gpf1-5, INPUT, NONE);
1011                 PIN_SLP(gpf1-6, INPUT, DOWN);
1012                 PIN_SLP(gpf1-7, PREV, NONE);
1013
1014                 PIN_SLP(gpf2-0, PREV, NONE);
1015                 PIN_SLP(gpf2-1, INPUT, DOWN);
1016                 PIN_SLP(gpf2-2, INPUT, DOWN);
1017                 PIN_SLP(gpf2-3, INPUT, DOWN);
1018                 PIN_SLP(gpf2-4, INPUT, DOWN);
1019                 PIN_SLP(gpf2-5, INPUT, DOWN);
1020                 PIN_SLP(gpf2-6, INPUT, NONE);
1021                 PIN_SLP(gpf2-7, INPUT, NONE);
1022
1023                 PIN_SLP(gpf3-0, INPUT, NONE);
1024                 PIN_SLP(gpf3-1, PREV, NONE);
1025                 PIN_SLP(gpf3-2, PREV, NONE);
1026                 PIN_SLP(gpf3-3, PREV, NONE);
1027                 PIN_SLP(gpf3-4, OUT1, NONE);
1028                 PIN_SLP(gpf3-5, INPUT, DOWN);
1029
1030                 PIN_SLP(gpj0-0, PREV, NONE);
1031                 PIN_SLP(gpj0-1, PREV, NONE);
1032                 PIN_SLP(gpj0-2, PREV, NONE);
1033                 PIN_SLP(gpj0-3, INPUT, DOWN);
1034                 PIN_SLP(gpj0-4, PREV, NONE);
1035                 PIN_SLP(gpj0-5, PREV, NONE);
1036                 PIN_SLP(gpj0-6, INPUT, DOWN);
1037                 PIN_SLP(gpj0-7, INPUT, DOWN);
1038
1039                 PIN_SLP(gpj1-0, INPUT, DOWN);
1040                 PIN_SLP(gpj1-1, PREV, NONE);
1041                 PIN_SLP(gpj1-2, PREV, NONE);
1042                 PIN_SLP(gpj1-3, INPUT, DOWN);
1043                 PIN_SLP(gpj1-4, INPUT, DOWN);
1044         };
1045 };
1046
1047 &pinctrl_1 {
1048         pinctrl-names = "default";
1049         pinctrl-0 = <&sleep1>;
1050
1051         sleep1: sleep-states {
1052                 PIN_SLP(gpk0-0, PREV, NONE);
1053                 PIN_SLP(gpk0-1, PREV, NONE);
1054                 PIN_SLP(gpk0-2, OUT0, NONE);
1055                 PIN_SLP(gpk0-3, PREV, NONE);
1056                 PIN_SLP(gpk0-4, PREV, NONE);
1057                 PIN_SLP(gpk0-5, PREV, NONE);
1058                 PIN_SLP(gpk0-6, PREV, NONE);
1059
1060                 PIN_SLP(gpk1-0, INPUT, DOWN);
1061                 PIN_SLP(gpk1-1, INPUT, DOWN);
1062                 PIN_SLP(gpk1-2, INPUT, DOWN);
1063                 PIN_SLP(gpk1-3, PREV, NONE);
1064                 PIN_SLP(gpk1-4, PREV, NONE);
1065                 PIN_SLP(gpk1-5, PREV, NONE);
1066                 PIN_SLP(gpk1-6, PREV, NONE);
1067
1068                 PIN_SLP(gpk2-0, INPUT, DOWN);
1069                 PIN_SLP(gpk2-1, INPUT, DOWN);
1070                 PIN_SLP(gpk2-2, INPUT, DOWN);
1071                 PIN_SLP(gpk2-3, INPUT, DOWN);
1072                 PIN_SLP(gpk2-4, INPUT, DOWN);
1073                 PIN_SLP(gpk2-5, INPUT, DOWN);
1074                 PIN_SLP(gpk2-6, INPUT, DOWN);
1075
1076                 PIN_SLP(gpk3-0, OUT0, NONE);
1077                 PIN_SLP(gpk3-1, INPUT, NONE);
1078                 PIN_SLP(gpk3-2, INPUT, DOWN);
1079                 PIN_SLP(gpk3-3, INPUT, NONE);
1080                 PIN_SLP(gpk3-4, INPUT, NONE);
1081                 PIN_SLP(gpk3-5, INPUT, NONE);
1082                 PIN_SLP(gpk3-6, INPUT, NONE);
1083
1084                 PIN_SLP(gpl0-0, INPUT, DOWN);
1085                 PIN_SLP(gpl0-1, INPUT, DOWN);
1086                 PIN_SLP(gpl0-2, INPUT, DOWN);
1087                 PIN_SLP(gpl0-3, INPUT, DOWN);
1088                 PIN_SLP(gpl0-4, PREV, NONE);
1089                 PIN_SLP(gpl0-6, PREV, NONE);
1090
1091                 PIN_SLP(gpl1-0, INPUT, DOWN);
1092                 PIN_SLP(gpl1-1, INPUT, DOWN);
1093                 PIN_SLP(gpl2-0, INPUT, DOWN);
1094                 PIN_SLP(gpl2-1, INPUT, DOWN);
1095                 PIN_SLP(gpl2-2, INPUT, DOWN);
1096                 PIN_SLP(gpl2-3, INPUT, DOWN);
1097                 PIN_SLP(gpl2-4, INPUT, DOWN);
1098                 PIN_SLP(gpl2-5, INPUT, DOWN);
1099                 PIN_SLP(gpl2-6, PREV, NONE);
1100                 PIN_SLP(gpl2-7, INPUT, DOWN);
1101
1102                 PIN_SLP(gpm0-0, INPUT, DOWN);
1103                 PIN_SLP(gpm0-1, INPUT, DOWN);
1104                 PIN_SLP(gpm0-2, INPUT, DOWN);
1105                 PIN_SLP(gpm0-3, INPUT, DOWN);
1106                 PIN_SLP(gpm0-4, INPUT, DOWN);
1107                 PIN_SLP(gpm0-5, INPUT, DOWN);
1108                 PIN_SLP(gpm0-6, INPUT, DOWN);
1109                 PIN_SLP(gpm0-7, INPUT, DOWN);
1110
1111                 PIN_SLP(gpm1-0, INPUT, DOWN);
1112                 PIN_SLP(gpm1-1, INPUT, DOWN);
1113                 PIN_SLP(gpm1-2, INPUT, NONE);
1114                 PIN_SLP(gpm1-3, INPUT, NONE);
1115                 PIN_SLP(gpm1-4, INPUT, NONE);
1116                 PIN_SLP(gpm1-5, INPUT, NONE);
1117                 PIN_SLP(gpm1-6, INPUT, DOWN);
1118
1119                 PIN_SLP(gpm2-0, INPUT, NONE);
1120                 PIN_SLP(gpm2-1, INPUT, NONE);
1121                 PIN_SLP(gpm2-2, INPUT, DOWN);
1122                 PIN_SLP(gpm2-3, INPUT, DOWN);
1123                 PIN_SLP(gpm2-4, INPUT, DOWN);
1124
1125                 PIN_SLP(gpm3-0, PREV, NONE);
1126                 PIN_SLP(gpm3-1, PREV, NONE);
1127                 PIN_SLP(gpm3-2, PREV, NONE);
1128                 PIN_SLP(gpm3-3, OUT1, NONE);
1129                 PIN_SLP(gpm3-4, INPUT, DOWN);
1130                 PIN_SLP(gpm3-5, INPUT, DOWN);
1131                 PIN_SLP(gpm3-6, INPUT, DOWN);
1132                 PIN_SLP(gpm3-7, INPUT, DOWN);
1133
1134                 PIN_SLP(gpm4-0, INPUT, DOWN);
1135                 PIN_SLP(gpm4-1, INPUT, DOWN);
1136                 PIN_SLP(gpm4-2, INPUT, DOWN);
1137                 PIN_SLP(gpm4-3, INPUT, DOWN);
1138                 PIN_SLP(gpm4-4, INPUT, DOWN);
1139                 PIN_SLP(gpm4-5, INPUT, DOWN);
1140                 PIN_SLP(gpm4-6, INPUT, DOWN);
1141                 PIN_SLP(gpm4-7, INPUT, DOWN);
1142
1143                 PIN_SLP(gpy0-0, INPUT, DOWN);
1144                 PIN_SLP(gpy0-1, INPUT, DOWN);
1145                 PIN_SLP(gpy0-2, INPUT, DOWN);
1146                 PIN_SLP(gpy0-3, INPUT, DOWN);
1147                 PIN_SLP(gpy0-4, INPUT, DOWN);
1148                 PIN_SLP(gpy0-5, INPUT, DOWN);
1149
1150                 PIN_SLP(gpy1-0, INPUT, DOWN);
1151                 PIN_SLP(gpy1-1, INPUT, DOWN);
1152                 PIN_SLP(gpy1-2, INPUT, DOWN);
1153                 PIN_SLP(gpy1-3, INPUT, DOWN);
1154
1155                 PIN_SLP(gpy2-0, PREV, NONE);
1156                 PIN_SLP(gpy2-1, INPUT, DOWN);
1157                 PIN_SLP(gpy2-2, INPUT, NONE);
1158                 PIN_SLP(gpy2-3, INPUT, NONE);
1159                 PIN_SLP(gpy2-4, INPUT, NONE);
1160                 PIN_SLP(gpy2-5, INPUT, NONE);
1161
1162                 PIN_SLP(gpy3-0, INPUT, DOWN);
1163                 PIN_SLP(gpy3-1, INPUT, DOWN);
1164                 PIN_SLP(gpy3-2, INPUT, DOWN);
1165                 PIN_SLP(gpy3-3, INPUT, DOWN);
1166                 PIN_SLP(gpy3-4, INPUT, DOWN);
1167                 PIN_SLP(gpy3-5, INPUT, DOWN);
1168                 PIN_SLP(gpy3-6, INPUT, DOWN);
1169                 PIN_SLP(gpy3-7, INPUT, DOWN);
1170
1171                 PIN_SLP(gpy4-0, INPUT, DOWN);
1172                 PIN_SLP(gpy4-1, INPUT, DOWN);
1173                 PIN_SLP(gpy4-2, INPUT, DOWN);
1174                 PIN_SLP(gpy4-3, INPUT, DOWN);
1175                 PIN_SLP(gpy4-4, INPUT, DOWN);
1176                 PIN_SLP(gpy4-5, INPUT, DOWN);
1177                 PIN_SLP(gpy4-6, INPUT, DOWN);
1178                 PIN_SLP(gpy4-7, INPUT, DOWN);
1179
1180                 PIN_SLP(gpy5-0, INPUT, DOWN);
1181                 PIN_SLP(gpy5-1, INPUT, DOWN);
1182                 PIN_SLP(gpy5-2, INPUT, DOWN);
1183                 PIN_SLP(gpy5-3, INPUT, DOWN);
1184                 PIN_SLP(gpy5-4, INPUT, DOWN);
1185                 PIN_SLP(gpy5-5, INPUT, DOWN);
1186                 PIN_SLP(gpy5-6, INPUT, DOWN);
1187                 PIN_SLP(gpy5-7, INPUT, DOWN);
1188
1189                 PIN_SLP(gpy6-0, INPUT, DOWN);
1190                 PIN_SLP(gpy6-1, INPUT, DOWN);
1191                 PIN_SLP(gpy6-2, INPUT, DOWN);
1192                 PIN_SLP(gpy6-3, INPUT, DOWN);
1193                 PIN_SLP(gpy6-4, INPUT, DOWN);
1194                 PIN_SLP(gpy6-5, INPUT, DOWN);
1195                 PIN_SLP(gpy6-6, INPUT, DOWN);
1196                 PIN_SLP(gpy6-7, INPUT, DOWN);
1197         };
1198 };
1199
1200 &pinctrl_2 {
1201         pinctrl-names = "default";
1202         pinctrl-0 = <&sleep2>;
1203
1204         sleep2: sleep-states {
1205                 PIN_SLP(gpz-0, INPUT, DOWN);
1206                 PIN_SLP(gpz-1, INPUT, DOWN);
1207                 PIN_SLP(gpz-2, INPUT, DOWN);
1208                 PIN_SLP(gpz-3, INPUT, DOWN);
1209                 PIN_SLP(gpz-4, INPUT, DOWN);
1210                 PIN_SLP(gpz-5, INPUT, DOWN);
1211                 PIN_SLP(gpz-6, INPUT, DOWN);
1212         };
1213 };
1214
1215 &pinctrl_3 {
1216         pinctrl-names = "default";
1217         pinctrl-0 = <&sleep3>;
1218
1219         sleep3: sleep-states {
1220                 PIN_SLP(gpv0-0, INPUT, DOWN);
1221                 PIN_SLP(gpv0-1, INPUT, DOWN);
1222                 PIN_SLP(gpv0-2, INPUT, DOWN);
1223                 PIN_SLP(gpv0-3, INPUT, DOWN);
1224                 PIN_SLP(gpv0-4, INPUT, DOWN);
1225                 PIN_SLP(gpv0-5, INPUT, DOWN);
1226                 PIN_SLP(gpv0-6, INPUT, DOWN);
1227                 PIN_SLP(gpv0-7, INPUT, DOWN);
1228
1229                 PIN_SLP(gpv1-0, INPUT, DOWN);
1230                 PIN_SLP(gpv1-1, INPUT, DOWN);
1231                 PIN_SLP(gpv1-2, INPUT, DOWN);
1232                 PIN_SLP(gpv1-3, INPUT, DOWN);
1233                 PIN_SLP(gpv1-4, INPUT, DOWN);
1234                 PIN_SLP(gpv1-5, INPUT, DOWN);
1235                 PIN_SLP(gpv1-6, INPUT, DOWN);
1236                 PIN_SLP(gpv1-7, INPUT, DOWN);
1237
1238                 PIN_SLP(gpv2-0, INPUT, DOWN);
1239                 PIN_SLP(gpv2-1, INPUT, DOWN);
1240                 PIN_SLP(gpv2-2, INPUT, DOWN);
1241                 PIN_SLP(gpv2-3, INPUT, DOWN);
1242                 PIN_SLP(gpv2-4, INPUT, DOWN);
1243                 PIN_SLP(gpv2-5, INPUT, DOWN);
1244                 PIN_SLP(gpv2-6, INPUT, DOWN);
1245                 PIN_SLP(gpv2-7, INPUT, DOWN);
1246
1247                 PIN_SLP(gpv3-0, INPUT, DOWN);
1248                 PIN_SLP(gpv3-1, INPUT, DOWN);
1249                 PIN_SLP(gpv3-2, INPUT, DOWN);
1250                 PIN_SLP(gpv3-3, INPUT, DOWN);
1251                 PIN_SLP(gpv3-4, INPUT, DOWN);
1252                 PIN_SLP(gpv3-5, INPUT, DOWN);
1253                 PIN_SLP(gpv3-6, INPUT, DOWN);
1254                 PIN_SLP(gpv3-7, INPUT, DOWN);
1255
1256                 PIN_SLP(gpv4-0, INPUT, DOWN);
1257         };
1258 };
1259
1260 &pwm {
1261         pinctrl-0 = <&pwm0_out>;
1262         pinctrl-names = "default";
1263         samsung,pwm-outputs = <0>;
1264         status = "okay";
1265 };
1266
1267 &rtc {
1268         status = "okay";
1269         clocks = <&clock CLK_RTC>, <&max77686 MAX77686_CLK_AP>;
1270         clock-names = "rtc", "rtc_src";
1271 };
1272
1273 &sdhci_2 {
1274         bus-width = <4>;
1275         cd-gpios = <&gpx3 4 0>;
1276         cd-inverted;
1277         pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4>;
1278         pinctrl-names = "default";
1279         vmmc-supply = <&ldo21_reg>;
1280         status = "okay";
1281 };
1282
1283 &serial_0 {
1284         status = "okay";
1285 };
1286
1287 &serial_1 {
1288         status = "okay";
1289 };
1290
1291 &serial_2 {
1292         status = "okay";
1293 };
1294
1295 &serial_3 {
1296         status = "okay";
1297 };
1298
1299 &spi_1 {
1300         pinctrl-names = "default";
1301         pinctrl-0 = <&spi1_bus>;
1302         cs-gpios = <&gpb 5 0>;
1303         status = "okay";
1304
1305         s5c73m3_spi: s5c73m3 {
1306                 compatible = "samsung,s5c73m3";
1307                 spi-max-frequency = <50000000>;
1308                 reg = <0>;
1309                 controller-data {
1310                         samsung,spi-feedback-delay = <2>;
1311                 };
1312         };
1313 };
1314
1315 &tmu {
1316         vtmu-supply = <&ldo10_reg>;
1317         status = "okay";
1318 };