arch/arm/boot/dts/spear1310.dtsi

   1 /*
   2  * DTS file for all SPEAr1310 SoCs
   3  *
   4  * Copyright 2012 Viresh Kumar <viresh.linux@gmail.com>
   5  *
   6  * The code contained herein is licensed under the GNU General Public
   7  * License. You may obtain a copy of the GNU General Public License
   8  * Version 2 or later at the following locations:
   9  *
  10  * http://www.opensource.org/licenses/gpl-license.html
  11  * http://www.gnu.org/copyleft/gpl.html
  12  */
  13
  14 /include/ "spear13xx.dtsi"
  15
  16 / {
  17         compatible = "st,spear1310";
  18
  19         ahb {
  20                 spics: spics@e0700000{
  21                         compatible = "st,spear-spics-gpio";
  22                         reg = <0xe0700000 0x1000>;
  23                         st-spics,peripcfg-reg = <0x3b0>;
  24                         st-spics,sw-enable-bit = <12>;
  25                         st-spics,cs-value-bit = <11>;
  26                         st-spics,cs-enable-mask = <3>;
  27                         st-spics,cs-enable-shift = <8>;
  28                         gpio-controller;
  29                         #gpio-cells = <2>;
  30                 };
  31
  32                 ahci@b1000000 {
  33                         compatible = "snps,spear-ahci";
  34                         reg = <0xb1000000 0x10000>;
  35                         interrupts = <0 68 0x4>;
  36                         status = "disabled";
  37                 };
  38
  39                 ahci@b1800000 {
  40                         compatible = "snps,spear-ahci";
  41                         reg = <0xb1800000 0x10000>;
  42                         interrupts = <0 69 0x4>;
  43                         status = "disabled";
  44                 };
  45
  46                 ahci@b4000000 {
  47                         compatible = "snps,spear-ahci";
  48                         reg = <0xb4000000 0x10000>;
  49                         interrupts = <0 70 0x4>;
  50                         status = "disabled";
  51                 };
  52
  53                 gmac1: eth@5c400000 {
  54                         compatible = "st,spear600-gmac";
  55                         reg = <0x5c400000 0x8000>;
  56                         interrupts = <0 95 0x4>;
  57                         interrupt-names = "macirq";
  58                         status = "disabled";
  59                 };
  60
  61                 gmac2: eth@5c500000 {
  62                         compatible = "st,spear600-gmac";
  63                         reg = <0x5c500000 0x8000>;
  64                         interrupts = <0 96 0x4>;
  65                         interrupt-names = "macirq";
  66                         status = "disabled";
  67                 };
  68
  69                 gmac3: eth@5c600000 {
  70                         compatible = "st,spear600-gmac";
  71                         reg = <0x5c600000 0x8000>;
  72                         interrupts = <0 97 0x4>;
  73                         interrupt-names = "macirq";
  74                         status = "disabled";
  75                 };
  76
  77                 gmac4: eth@5c700000 {
  78                         compatible = "st,spear600-gmac";
  79                         reg = <0x5c700000 0x8000>;
  80                         interrupts = <0 98 0x4>;
  81                         interrupt-names = "macirq";
  82                         status = "disabled";
  83                 };
  84
  85                 pinmux: pinmux@e0700000 {
  86                         compatible = "st,spear1310-pinmux";
  87                         reg = <0xe0700000 0x1000>;
  88                         #gpio-range-cells = <2>;
  89                 };
  90
  91                 apb {
  92                         i2c1: i2c@5cd00000 {
  93                                 #address-cells = <1>;
  94                                 #size-cells = <0>;
  95                                 compatible = "snps,designware-i2c";
  96                                 reg = <0x5cd00000 0x1000>;
  97                                 interrupts = <0 87 0x4>;
  98                                 status = "disabled";
  99                         };
 100
 101                         i2c2: i2c@5ce00000 {
 102                                 #address-cells = <1>;
 103                                 #size-cells = <0>;
 104                                 compatible = "snps,designware-i2c";
 105                                 reg = <0x5ce00000 0x1000>;
 106                                 interrupts = <0 88 0x4>;
 107                                 status = "disabled";
 108                         };
 109
 110                         i2c3: i2c@5cf00000 {
 111                                 #address-cells = <1>;
 112                                 #size-cells = <0>;
 113                                 compatible = "snps,designware-i2c";
 114                                 reg = <0x5cf00000 0x1000>;
 115                                 interrupts = <0 89 0x4>;
 116                                 status = "disabled";
 117                         };
 118
 119                         i2c4: i2c@5d000000 {
 120                                 #address-cells = <1>;
 121                                 #size-cells = <0>;
 122                                 compatible = "snps,designware-i2c";
 123                                 reg = <0x5d000000 0x1000>;
 124                                 interrupts = <0 90 0x4>;
 125                                 status = "disabled";
 126                         };
 127
 128                         i2c5: i2c@5d100000 {
 129                                 #address-cells = <1>;
 130                                 #size-cells = <0>;
 131                                 compatible = "snps,designware-i2c";
 132                                 reg = <0x5d100000 0x1000>;
 133                                 interrupts = <0 91 0x4>;
 134                                 status = "disabled";
 135                         };
 136
 137                         i2c6: i2c@5d200000 {
 138                                 #address-cells = <1>;
 139                                 #size-cells = <0>;
 140                                 compatible = "snps,designware-i2c";
 141                                 reg = <0x5d200000 0x1000>;
 142                                 interrupts = <0 92 0x4>;
 143                                 status = "disabled";
 144                         };
 145
 146                         i2c7: i2c@5d300000 {
 147                                 #address-cells = <1>;
 148                                 #size-cells = <0>;
 149                                 compatible = "snps,designware-i2c";
 150                                 reg = <0x5d300000 0x1000>;
 151                                 interrupts = <0 93 0x4>;
 152                                 status = "disabled";
 153                         };
 154
 155                         spi1: spi@5d400000 {
 156                                 compatible = "arm,pl022", "arm,primecell";
 157                                 reg = <0x5d400000 0x1000>;
 158                                 interrupts = <0 99 0x4>;
 159                                 status = "disabled";
 160                         };
 161
 162                         serial@5c800000 {
 163                                 compatible = "arm,pl011", "arm,primecell";
 164                                 reg = <0x5c800000 0x1000>;
 165                                 interrupts = <0 82 0x4>;
 166                                 status = "disabled";
 167                         };
 168
 169                         serial@5c900000 {
 170                                 compatible = "arm,pl011", "arm,primecell";
 171                                 reg = <0x5c900000 0x1000>;
 172                                 interrupts = <0 83 0x4>;
 173                                 status = "disabled";
 174                         };
 175
 176                         serial@5ca00000 {
 177                                 compatible = "arm,pl011", "arm,primecell";
 178                                 reg = <0x5ca00000 0x1000>;
 179                                 interrupts = <0 84 0x4>;
 180                                 status = "disabled";
 181                         };
 182
 183                         serial@5cb00000 {
 184                                 compatible = "arm,pl011", "arm,primecell";
 185                                 reg = <0x5cb00000 0x1000>;
 186                                 interrupts = <0 85 0x4>;
 187                                 status = "disabled";
 188                         };
 189
 190                         serial@5cc00000 {
 191                                 compatible = "arm,pl011", "arm,primecell";
 192                                 reg = <0x5cc00000 0x1000>;
 193                                 interrupts = <0 86 0x4>;
 194                                 status = "disabled";
 195                         };
 196
 197                         thermal@e07008c4 {
 198                                 st,thermal-flags = <0x7000>;
 199                         };
 200
 201                         gpiopinctrl: gpio@d8400000 {
 202                                 compatible = "st,spear-plgpio";
 203                                 reg = <0xd8400000 0x1000>;
 204                                 interrupts = <0 100 0x4>;
 205                                 #interrupt-cells = <1>;
 206                                 interrupt-controller;
 207                                 gpio-controller;
 208                                 #gpio-cells = <2>;
 209                                 gpio-ranges = <&pinmux 0 246>;
 210                                 status = "disabled";
 211
 212                                 st-plgpio,ngpio = <246>;
 213                                 st-plgpio,enb-reg = <0xd0>;
 214                                 st-plgpio,wdata-reg = <0x90>;
 215                                 st-plgpio,dir-reg = <0xb0>;
 216                                 st-plgpio,ie-reg = <0x30>;
 217                                 st-plgpio,rdata-reg = <0x70>;
 218                                 st-plgpio,mis-reg = <0x10>;
 219                                 st-plgpio,eit-reg = <0x50>;
 220                         };
 221                 };
 222         };
 223 };