10 config ARCH_DAVINCI_DMx
14 menu "TI DaVinci Implementations"
16 comment "DaVinci Core Type"
18 config ARCH_DAVINCI_DM644x
19 bool "DaVinci 644x based system"
21 select ARCH_DAVINCI_DMx
23 config ARCH_DAVINCI_DM355
24 bool "DaVinci 355 based system"
26 select ARCH_DAVINCI_DMx
28 config ARCH_DAVINCI_DM646x
29 bool "DaVinci 646x based system"
31 select ARCH_DAVINCI_DMx
33 config ARCH_DAVINCI_DA830
34 bool "DA830/OMAP-L137/AM17x based system"
35 select ARCH_DAVINCI_DA8XX
36 select CPU_DCACHE_WRITETHROUGH # needed on silicon revs 1.0, 1.1
39 config ARCH_DAVINCI_DA850
40 bool "DA850/OMAP-L138/AM18x based system"
41 select ARCH_DAVINCI_DA8XX
42 select ARCH_HAS_CPUFREQ
45 config ARCH_DAVINCI_DA8XX
49 config ARCH_DAVINCI_DM365
50 bool "DaVinci 365 based system"
52 select ARCH_DAVINCI_DMx
54 config ARCH_DAVINCI_TNETV107X
55 bool "TNETV107X based system"
59 comment "DaVinci Board Type"
61 config MACH_DAVINCI_EVM
63 default ARCH_DAVINCI_DM644x
64 depends on ARCH_DAVINCI_DM644x
68 Configure this option to specify the whether the board used
69 for development is a DM644x EVM
73 depends on ARCH_DAVINCI_DM644x
77 Say Y here to select the Lyrtech Small Form Factor
78 Software Defined Radio (SFFSDR) board.
80 config MACH_NEUROS_OSD2
81 bool "Neuros OSD2 Open Television Set Top Box"
82 depends on ARCH_DAVINCI_DM644x
84 Configure this option to specify the whether the board used
85 for development is a Neuros OSD2 Open Set Top Box.
87 config MACH_DAVINCI_DM355_EVM
89 default ARCH_DAVINCI_DM355
90 depends on ARCH_DAVINCI_DM355
92 Configure this option to specify the whether the board used
93 for development is a DM355 EVM
95 config MACH_DM355_LEOPARD
96 bool "DM355 Leopard board"
97 depends on ARCH_DAVINCI_DM355
99 Configure this option to specify the whether the board used
100 for development is a DM355 Leopard board.
102 config MACH_DAVINCI_DM6467_EVM
104 default ARCH_DAVINCI_DM646x
105 depends on ARCH_DAVINCI_DM646x
108 select MACH_DAVINCI_DM6467TEVM
110 Configure this option to specify the whether the board used
111 for development is a DM6467 EVM
113 config MACH_DAVINCI_DM6467TEVM
116 config MACH_DAVINCI_DM365_EVM
118 default ARCH_DAVINCI_DM365
119 depends on ARCH_DAVINCI_DM365
123 Configure this option to specify whether the board used
124 for development is a DM365 EVM
126 config MACH_DAVINCI_DA830_EVM
127 bool "TI DA830/OMAP-L137/AM17x Reference Platform"
128 default ARCH_DAVINCI_DA830
129 depends on ARCH_DAVINCI_DA830
134 Say Y here to select the TI DA830/OMAP-L137/AM17x Evaluation Module.
137 prompt "Select DA830/OMAP-L137/AM17x UI board peripheral"
138 depends on MACH_DAVINCI_DA830_EVM
140 The presence of UI card on the DA830/OMAP-L137/AM17x EVM is
141 detected automatically based on successful probe of the I2C
142 based GPIO expander on that board. This option selected in this
143 menu has an effect only in case of a successful UI card detection.
148 Say Y here to use the LCD as a framebuffer or simple character
154 Say Y here to use the NAND flash. Do not forget to setup
155 the switch correctly.
158 config MACH_DAVINCI_DA850_EVM
159 bool "TI DA850/OMAP-L138/AM18x Reference Platform"
160 default ARCH_DAVINCI_DA850
161 depends on ARCH_DAVINCI_DA850
163 Say Y here to select the TI DA850/OMAP-L138/AM18x Evaluation Module.
166 prompt "Select peripherals connected to expander on UI board"
167 depends on MACH_DAVINCI_DA850_EVM
169 The presence of User Interface (UI) card on the DA850/OMAP-L138/AM18x
170 EVM is detected automatically based on successful probe of the I2C
171 based GPIO expander on that card. This option selected in this
172 menu has an effect only in case of a successful UI card detection.
175 bool "No peripheral is enabled"
177 Say Y if you do not want to enable any of the peripherals connected
178 to TCA6416 expander on DA850/OMAP-L138/AM18x EVM UI card
181 bool "RMII Ethernet PHY"
183 Say Y if you want to use the RMII PHY on the DA850/OMAP-L138/AM18x
184 EVM. This PHY is found on the UI daughter card that is supplied with
186 NOTE: Please take care while choosing this option, MII PHY will
187 not be functional if RMII mode is selected.
189 config DA850_UI_SD_VIDEO_PORT
190 bool "Video Port Interface"
192 Say Y if you want to use Video Port Interface (VPIF) on the
193 DA850/OMAP-L138 EVM. The Video decoders/encoders are found on the
194 UI daughter card that is supplied with the EVM.
199 bool "AM18x wl1271 daughter board"
200 depends on MACH_DAVINCI_DA850_EVM
202 The wl1271 daughter card for AM18x EVMs is a combo wireless
203 connectivity add-on card, based on the LS Research TiWi module with
204 Texas Instruments' wl1271 solution.
205 Say Y if you want to use a wl1271 expansion card connected to the
209 default MACH_DAVINCI_DA850_EVM
211 config KEYBOARD_GPIO_POLLED
212 default MACH_DAVINCI_DA850_EVM
214 config MACH_TNETV107X
215 bool "TI TNETV107X Reference Platform"
216 default ARCH_DAVINCI_TNETV107X
217 depends on ARCH_DAVINCI_TNETV107X
219 Say Y here to select the TI TNETV107X Evaluation Module.
221 config MACH_MITYOMAPL138
222 bool "Critical Link MityDSP-L138/MityARM-1808 SoM"
223 depends on ARCH_DAVINCI_DA850
227 Say Y here to select the Critical Link MityDSP-L138/MityARM-1808
228 System on Module. Information on this SoM may be found at
229 http://www.mitydsp.com
231 config MACH_OMAPL138_HAWKBOARD
232 bool "TI AM1808 / OMAPL-138 Hawkboard platform"
233 depends on ARCH_DAVINCI_DA850
235 Say Y here to select the TI AM1808 / OMAPL-138 Hawkboard platform .
236 Information of this board may be found at
237 http://www.hawkboard.org/
240 bool "DAVINCI multiplexing support"
241 depends on ARCH_DAVINCI
244 Pin multiplexing support for DAVINCI boards. If your bootloader
245 sets the multiplexing correctly, say N. Otherwise, or if unsure,
248 config DAVINCI_MUX_DEBUG
249 bool "Multiplexing debug output"
250 depends on DAVINCI_MUX
252 Makes the multiplexing functions print out a lot of debug info.
253 This is useful if you want to find out the correct values of the
254 multiplexing registers.
256 config DAVINCI_MUX_WARNINGS
257 bool "Warn about pins the bootloader didn't set up"
258 depends on DAVINCI_MUX
260 Choose Y here to warn whenever driver initialization logic needs
261 to change the pin multiplexing setup. When there are no warnings
262 printed, it's safe to deselect DAVINCI_MUX for your product.
264 config DAVINCI_RESET_CLOCKS
265 bool "Reset unused clocks during boot"
266 depends on ARCH_DAVINCI
268 Say Y if you want to reset unused clocks during boot.
269 This option saves power, but assumes all drivers are
270 using the clock framework. Broken drivers that do not
271 yet use clock framework may not work with this option.
272 If you are booting from another operating system, you
273 probably do not want this option enabled until your
274 device drivers work properly.