2 * board-overo.c (Gumstix Overo)
4 * Initial code: Steve Sakoman <steve@sakoman.com>
6 * This program is free software; you can redistribute it and/or
7 * modify it under the terms of the GNU General Public License
8 * version 2 as published by the Free Software Foundation.
10 * This program is distributed in the hope that it will be useful, but
11 * WITHOUT ANY WARRANTY; without even the implied warranty of
12 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
13 * General Public License for more details.
15 * You should have received a copy of the GNU General Public License
16 * along with this program; if not, write to the Free Software
17 * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
22 #include <linux/clk.h>
23 #include <linux/delay.h>
24 #include <linux/err.h>
25 #include <linux/init.h>
27 #include <linux/gpio.h>
28 #include <linux/kernel.h>
29 #include <linux/platform_device.h>
30 #include <linux/i2c/twl.h>
31 #include <linux/regulator/machine.h>
32 #include <linux/regulator/fixed.h>
33 #include <linux/spi/spi.h>
35 #include <linux/mtd/mtd.h>
36 #include <linux/mtd/nand.h>
37 #include <linux/mtd/partitions.h>
38 #include <linux/mmc/host.h>
40 #include <asm/mach-types.h>
41 #include <asm/mach/arch.h>
42 #include <asm/mach/flash.h>
43 #include <asm/mach/map.h>
46 #include <video/omapdss.h>
47 #include <video/omap-panel-generic-dpi.h>
48 #include <video/omap-panel-tfp410.h>
49 #include <plat/gpmc.h>
50 #include <mach/hardware.h>
51 #include <plat/nand.h>
52 #include <plat/mcspi.h>
57 #include "sdram-micron-mt46h32m32lf-6.h"
59 #include "common-board-devices.h"
61 #define OVERO_GPIO_BT_XGATE 15
62 #define OVERO_GPIO_W2W_NRESET 16
63 #define OVERO_GPIO_PENDOWN 114
64 #define OVERO_GPIO_BT_NRESET 164
65 #define OVERO_GPIO_USBH_CPEN 168
66 #define OVERO_GPIO_USBH_NRESET 183
68 #define OVERO_SMSC911X_CS 5
69 #define OVERO_SMSC911X_GPIO 176
70 #define OVERO_SMSC911X2_CS 4
71 #define OVERO_SMSC911X2_GPIO 65
73 #if defined(CONFIG_TOUCHSCREEN_ADS7846) || \
74 defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE)
76 /* fixed regulator for ads7846 */
77 static struct regulator_consumer_supply ads7846_supply[] = {
78 REGULATOR_SUPPLY("vcc", "spi1.0"),
81 static struct regulator_init_data vads7846_regulator = {
83 .valid_ops_mask = REGULATOR_CHANGE_STATUS,
85 .num_consumer_supplies = ARRAY_SIZE(ads7846_supply),
86 .consumer_supplies = ads7846_supply,
89 static struct fixed_voltage_config vads7846 = {
90 .supply_name = "vads7846",
91 .microvolts = 3300000, /* 3.3V */
94 .init_data = &vads7846_regulator,
97 static struct platform_device vads7846_device = {
98 .name = "reg-fixed-voltage",
101 .platform_data = &vads7846,
105 static void __init overo_ads7846_init(void)
107 omap_ads7846_init(1, OVERO_GPIO_PENDOWN, 0, NULL);
108 platform_device_register(&vads7846_device);
112 static inline void __init overo_ads7846_init(void) { return; }
115 #if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE)
117 #include <linux/smsc911x.h>
118 #include <plat/gpmc-smsc911x.h>
120 static struct omap_smsc911x_platform_data smsc911x_cfg = {
122 .cs = OVERO_SMSC911X_CS,
123 .gpio_irq = OVERO_SMSC911X_GPIO,
124 .gpio_reset = -EINVAL,
125 .flags = SMSC911X_USE_32BIT,
128 static struct omap_smsc911x_platform_data smsc911x2_cfg = {
130 .cs = OVERO_SMSC911X2_CS,
131 .gpio_irq = OVERO_SMSC911X2_GPIO,
132 .gpio_reset = -EINVAL,
133 .flags = SMSC911X_USE_32BIT,
136 static void __init overo_init_smsc911x(void)
138 gpmc_smsc911x_init(&smsc911x_cfg);
139 gpmc_smsc911x_init(&smsc911x2_cfg);
143 static inline void __init overo_init_smsc911x(void) { return; }
147 static int lcd_enabled;
148 static int dvi_enabled;
150 #define OVERO_GPIO_LCD_EN 144
151 #define OVERO_GPIO_LCD_BL 145
153 static struct gpio overo_dss_gpios[] __initdata = {
154 { OVERO_GPIO_LCD_EN, GPIOF_OUT_INIT_HIGH, "OVERO_GPIO_LCD_EN" },
155 { OVERO_GPIO_LCD_BL, GPIOF_OUT_INIT_HIGH, "OVERO_GPIO_LCD_BL" },
158 static void __init overo_display_init(void)
160 if (gpio_request_array(overo_dss_gpios, ARRAY_SIZE(overo_dss_gpios))) {
161 printk(KERN_ERR "could not obtain DSS control GPIOs\n");
165 gpio_export(OVERO_GPIO_LCD_EN, 0);
166 gpio_export(OVERO_GPIO_LCD_BL, 0);
169 static struct tfp410_platform_data dvi_panel = {
171 .power_down_gpio = -1,
174 static struct omap_dss_device overo_dvi_device = {
176 .type = OMAP_DISPLAY_TYPE_DPI,
177 .driver_name = "tfp410",
179 .phy.dpi.data_lines = 24,
182 static struct omap_dss_device overo_tv_device = {
184 .driver_name = "venc",
185 .type = OMAP_DISPLAY_TYPE_VENC,
186 .phy.venc.type = OMAP_DSS_VENC_TYPE_SVIDEO,
189 static int overo_panel_enable_lcd(struct omap_dss_device *dssdev)
192 printk(KERN_ERR "cannot enable LCD, DVI is enabled\n");
196 gpio_set_value(OVERO_GPIO_LCD_EN, 1);
197 gpio_set_value(OVERO_GPIO_LCD_BL, 1);
202 static void overo_panel_disable_lcd(struct omap_dss_device *dssdev)
204 gpio_set_value(OVERO_GPIO_LCD_EN, 0);
205 gpio_set_value(OVERO_GPIO_LCD_BL, 0);
209 static struct panel_generic_dpi_data lcd43_panel = {
210 .name = "samsung_lte430wq_f0c",
211 .platform_enable = overo_panel_enable_lcd,
212 .platform_disable = overo_panel_disable_lcd,
215 static struct omap_dss_device overo_lcd43_device = {
217 .type = OMAP_DISPLAY_TYPE_DPI,
218 .driver_name = "generic_dpi_panel",
219 .data = &lcd43_panel,
220 .phy.dpi.data_lines = 24,
223 #if defined(CONFIG_PANEL_LGPHILIPS_LB035Q02) || \
224 defined(CONFIG_PANEL_LGPHILIPS_LB035Q02_MODULE)
225 static struct omap_dss_device overo_lcd35_device = {
226 .type = OMAP_DISPLAY_TYPE_DPI,
228 .driver_name = "lgphilips_lb035q02_panel",
229 .phy.dpi.data_lines = 24,
230 .platform_enable = overo_panel_enable_lcd,
231 .platform_disable = overo_panel_disable_lcd,
235 static struct omap_dss_device *overo_dss_devices[] = {
238 #if defined(CONFIG_PANEL_LGPHILIPS_LB035Q02) || \
239 defined(CONFIG_PANEL_LGPHILIPS_LB035Q02_MODULE)
245 static struct omap_dss_board_info overo_dss_data = {
246 .num_devices = ARRAY_SIZE(overo_dss_devices),
247 .devices = overo_dss_devices,
248 .default_device = &overo_dvi_device,
251 static struct mtd_partition overo_nand_partitions[] = {
254 .offset = 0, /* Offset = 0x00000 */
255 .size = 4 * NAND_BLOCK_SIZE,
256 .mask_flags = MTD_WRITEABLE
260 .offset = MTDPART_OFS_APPEND, /* Offset = 0x80000 */
261 .size = 14 * NAND_BLOCK_SIZE,
264 .name = "uboot environment",
265 .offset = MTDPART_OFS_APPEND, /* Offset = 0x240000 */
266 .size = 2 * NAND_BLOCK_SIZE,
270 .offset = MTDPART_OFS_APPEND, /* Offset = 0x280000 */
271 .size = 32 * NAND_BLOCK_SIZE,
275 .offset = MTDPART_OFS_APPEND, /* Offset = 0x680000 */
276 .size = MTDPART_SIZ_FULL,
280 static struct omap2_hsmmc_info mmc[] = {
283 .caps = MMC_CAP_4_BIT_DATA,
289 .caps = MMC_CAP_4_BIT_DATA,
293 .ocr_mask = 0x00100000, /* 3.3V */
298 static struct regulator_consumer_supply overo_vmmc1_supply[] = {
299 REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"),
302 #if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE)
303 #include <linux/leds.h>
305 static struct gpio_led gpio_leds[] = {
307 .name = "overo:red:gpio21",
308 .default_trigger = "heartbeat",
313 .name = "overo:blue:gpio22",
314 .default_trigger = "none",
319 .name = "overo:blue:COM",
320 .default_trigger = "mmc0",
321 .gpio = -EINVAL, /* gets replaced */
326 static struct gpio_led_platform_data gpio_leds_pdata = {
328 .num_leds = ARRAY_SIZE(gpio_leds),
331 static struct platform_device gpio_leds_device = {
335 .platform_data = &gpio_leds_pdata,
339 static void __init overo_init_led(void)
341 platform_device_register(&gpio_leds_device);
345 static inline void __init overo_init_led(void) { return; }
348 #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
349 #include <linux/input.h>
350 #include <linux/gpio_keys.h>
352 static struct gpio_keys_button gpio_buttons[] = {
367 static struct gpio_keys_platform_data gpio_keys_pdata = {
368 .buttons = gpio_buttons,
369 .nbuttons = ARRAY_SIZE(gpio_buttons),
372 static struct platform_device gpio_keys_device = {
376 .platform_data = &gpio_keys_pdata,
380 static void __init overo_init_keys(void)
382 platform_device_register(&gpio_keys_device);
386 static inline void __init overo_init_keys(void) { return; }
389 static int overo_twl_gpio_setup(struct device *dev,
390 unsigned gpio, unsigned ngpio)
392 #if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE)
393 /* TWL4030_GPIO_MAX + 1 == ledB, PMU_STAT (out, active low LED) */
394 gpio_leds[2].gpio = gpio + TWL4030_GPIO_MAX + 1;
400 static struct twl4030_gpio_platform_data overo_gpio_data = {
402 .setup = overo_twl_gpio_setup,
405 static struct regulator_init_data overo_vmmc1 = {
409 .valid_modes_mask = REGULATOR_MODE_NORMAL
410 | REGULATOR_MODE_STANDBY,
411 .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE
412 | REGULATOR_CHANGE_MODE
413 | REGULATOR_CHANGE_STATUS,
415 .num_consumer_supplies = ARRAY_SIZE(overo_vmmc1_supply),
416 .consumer_supplies = overo_vmmc1_supply,
419 static struct twl4030_platform_data overo_twldata = {
420 .gpio = &overo_gpio_data,
421 .vmmc1 = &overo_vmmc1,
424 static int __init overo_i2c_init(void)
426 omap3_pmic_get_config(&overo_twldata,
427 TWL_COMMON_PDATA_USB | TWL_COMMON_PDATA_AUDIO,
428 TWL_COMMON_REGULATOR_VDAC | TWL_COMMON_REGULATOR_VPLL2);
430 overo_twldata.vpll2->constraints.name = "VDVI";
432 omap3_pmic_init("tps65950", &overo_twldata);
433 /* i2c2 pins are used for gpio */
434 omap_register_i2c_bus(3, 400, NULL, 0);
438 static struct spi_board_info overo_spi_board_info[] __initdata = {
439 #if defined(CONFIG_PANEL_LGPHILIPS_LB035Q02) || \
440 defined(CONFIG_PANEL_LGPHILIPS_LB035Q02_MODULE)
442 .modalias = "lgphilips_lb035q02_panel-spi",
445 .max_speed_hz = 500000,
451 static int __init overo_spi_init(void)
453 overo_ads7846_init();
454 spi_register_board_info(overo_spi_board_info,
455 ARRAY_SIZE(overo_spi_board_info));
459 static const struct usbhs_omap_board_data usbhs_bdata __initconst = {
460 .port_mode[0] = OMAP_USBHS_PORT_MODE_UNUSED,
461 .port_mode[1] = OMAP_EHCI_PORT_MODE_PHY,
462 .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,
464 .reset_gpio_port[0] = -EINVAL,
465 .reset_gpio_port[1] = OVERO_GPIO_USBH_NRESET,
466 .reset_gpio_port[2] = -EINVAL
469 #ifdef CONFIG_OMAP_MUX
470 static struct omap_board_mux board_mux[] __initdata = {
471 { .reg_offset = OMAP_MUX_TERMINATOR },
475 static struct gpio overo_bt_gpios[] __initdata = {
476 { OVERO_GPIO_BT_XGATE, GPIOF_OUT_INIT_LOW, "lcd enable" },
477 { OVERO_GPIO_BT_NRESET, GPIOF_OUT_INIT_HIGH, "lcd bl enable" },
480 static struct regulator_consumer_supply dummy_supplies[] = {
481 REGULATOR_SUPPLY("vddvario", "smsc911x.0"),
482 REGULATOR_SUPPLY("vdd33a", "smsc911x.0"),
483 REGULATOR_SUPPLY("vddvario", "smsc911x.1"),
484 REGULATOR_SUPPLY("vdd33a", "smsc911x.1"),
487 static void __init overo_init(void)
491 regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies));
492 omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
494 omap_hsmmc_init(mmc);
495 omap_display_init(&overo_dss_data);
497 omap_sdrc_init(mt46h32m32lf6_sdrc_params,
498 mt46h32m32lf6_sdrc_params);
499 omap_nand_flash_init(0, overo_nand_partitions,
500 ARRAY_SIZE(overo_nand_partitions));
502 usbhs_init(&usbhs_bdata);
504 overo_init_smsc911x();
505 overo_display_init();
509 /* Ensure SDRC pins are mux'd for self-refresh */
510 omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT);
511 omap_mux_init_signal("sdrc_cke1", OMAP_PIN_OUTPUT);
513 ret = gpio_request_one(OVERO_GPIO_W2W_NRESET, GPIOF_OUT_INIT_HIGH,
514 "OVERO_GPIO_W2W_NRESET");
516 gpio_export(OVERO_GPIO_W2W_NRESET, 0);
517 gpio_set_value(OVERO_GPIO_W2W_NRESET, 0);
519 gpio_set_value(OVERO_GPIO_W2W_NRESET, 1);
521 printk(KERN_ERR "could not obtain gpio for "
522 "OVERO_GPIO_W2W_NRESET\n");
525 ret = gpio_request_array(overo_bt_gpios, ARRAY_SIZE(overo_bt_gpios));
527 pr_err("%s: could not obtain BT gpios\n", __func__);
529 gpio_export(OVERO_GPIO_BT_XGATE, 0);
530 gpio_export(OVERO_GPIO_BT_NRESET, 0);
531 gpio_set_value(OVERO_GPIO_BT_NRESET, 0);
533 gpio_set_value(OVERO_GPIO_BT_NRESET, 1);
536 ret = gpio_request_one(OVERO_GPIO_USBH_CPEN, GPIOF_OUT_INIT_HIGH,
537 "OVERO_GPIO_USBH_CPEN");
539 gpio_export(OVERO_GPIO_USBH_CPEN, 0);
541 printk(KERN_ERR "could not obtain gpio for "
542 "OVERO_GPIO_USBH_CPEN\n");
545 MACHINE_START(OVERO, "Gumstix Overo")
546 .atag_offset = 0x100,
547 .reserve = omap_reserve,
548 .map_io = omap3_map_io,
549 .init_early = omap35xx_init_early,
550 .init_irq = omap3_init_irq,
551 .handle_irq = omap3_intc_handle_irq,
552 .init_machine = overo_init,
553 .init_late = omap35xx_init_late,
554 .timer = &omap3_timer,
555 .restart = omap_prcm_restart,