arm64: kernel: Add support for User Access Override
[cascardo/linux.git] / arch / arm64 / include / asm / alternative.h
1 #ifndef __ASM_ALTERNATIVE_H
2 #define __ASM_ALTERNATIVE_H
3
4 #include <asm/cpufeature.h>
5
6 #ifndef __ASSEMBLY__
7
8 #include <linux/init.h>
9 #include <linux/kconfig.h>
10 #include <linux/types.h>
11 #include <linux/stddef.h>
12 #include <linux/stringify.h>
13
14 struct alt_instr {
15         s32 orig_offset;        /* offset to original instruction */
16         s32 alt_offset;         /* offset to replacement instruction */
17         u16 cpufeature;         /* cpufeature bit set for replacement */
18         u8  orig_len;           /* size of original instruction(s) */
19         u8  alt_len;            /* size of new instruction(s), <= orig_len */
20 };
21
22 void __init apply_alternatives_all(void);
23 void apply_alternatives(void *start, size_t length);
24
25 #define ALTINSTR_ENTRY(feature)                                               \
26         " .word 661b - .\n"                             /* label           */ \
27         " .word 663f - .\n"                             /* new instruction */ \
28         " .hword " __stringify(feature) "\n"            /* feature bit     */ \
29         " .byte 662b-661b\n"                            /* source len      */ \
30         " .byte 664f-663f\n"                            /* replacement len */
31
32 /*
33  * alternative assembly primitive:
34  *
35  * If any of these .org directive fail, it means that insn1 and insn2
36  * don't have the same length. This used to be written as
37  *
38  * .if ((664b-663b) != (662b-661b))
39  *      .error "Alternatives instruction length mismatch"
40  * .endif
41  *
42  * but most assemblers die if insn1 or insn2 have a .inst. This should
43  * be fixed in a binutils release posterior to 2.25.51.0.2 (anything
44  * containing commit 4e4d08cf7399b606 or c1baaddf8861).
45  */
46 #define __ALTERNATIVE_CFG(oldinstr, newinstr, feature, cfg_enabled)     \
47         ".if "__stringify(cfg_enabled)" == 1\n"                         \
48         "661:\n\t"                                                      \
49         oldinstr "\n"                                                   \
50         "662:\n"                                                        \
51         ".pushsection .altinstructions,\"a\"\n"                         \
52         ALTINSTR_ENTRY(feature)                                         \
53         ".popsection\n"                                                 \
54         ".pushsection .altinstr_replacement, \"a\"\n"                   \
55         "663:\n\t"                                                      \
56         newinstr "\n"                                                   \
57         "664:\n\t"                                                      \
58         ".popsection\n\t"                                               \
59         ".org   . - (664b-663b) + (662b-661b)\n\t"                      \
60         ".org   . - (662b-661b) + (664b-663b)\n"                        \
61         ".endif\n"
62
63 #define _ALTERNATIVE_CFG(oldinstr, newinstr, feature, cfg, ...) \
64         __ALTERNATIVE_CFG(oldinstr, newinstr, feature, IS_ENABLED(cfg))
65
66 #else
67
68 #include <asm/assembler.h>
69
70 .macro altinstruction_entry orig_offset alt_offset feature orig_len alt_len
71         .word \orig_offset - .
72         .word \alt_offset - .
73         .hword \feature
74         .byte \orig_len
75         .byte \alt_len
76 .endm
77
78 .macro alternative_insn insn1, insn2, cap, enable = 1
79         .if \enable
80 661:    \insn1
81 662:    .pushsection .altinstructions, "a"
82         altinstruction_entry 661b, 663f, \cap, 662b-661b, 664f-663f
83         .popsection
84         .pushsection .altinstr_replacement, "ax"
85 663:    \insn2
86 664:    .popsection
87         .org    . - (664b-663b) + (662b-661b)
88         .org    . - (662b-661b) + (664b-663b)
89         .endif
90 .endm
91
92 /*
93  * Begin an alternative code sequence.
94  *
95  * The code that follows this macro will be assembled and linked as
96  * normal. There are no restrictions on this code.
97  */
98 .macro alternative_if_not cap, enable = 1
99         .if \enable
100         .pushsection .altinstructions, "a"
101         altinstruction_entry 661f, 663f, \cap, 662f-661f, 664f-663f
102         .popsection
103 661:
104         .endif
105 .endm
106
107 /*
108  * Provide the alternative code sequence.
109  *
110  * The code that follows this macro is assembled into a special
111  * section to be used for dynamic patching. Code that follows this
112  * macro must:
113  *
114  * 1. Be exactly the same length (in bytes) as the default code
115  *    sequence.
116  *
117  * 2. Not contain a branch target that is used outside of the
118  *    alternative sequence it is defined in (branches into an
119  *    alternative sequence are not fixed up).
120  */
121 .macro alternative_else, enable = 1
122         .if \enable
123 662:    .pushsection .altinstr_replacement, "ax"
124 663:
125         .endif
126 .endm
127
128 /*
129  * Complete an alternative code sequence.
130  */
131 .macro alternative_endif, enable = 1
132         .if \enable
133 664:    .popsection
134         .org    . - (664b-663b) + (662b-661b)
135         .org    . - (662b-661b) + (664b-663b)
136         .endif
137 .endm
138
139 #define _ALTERNATIVE_CFG(insn1, insn2, cap, cfg, ...)   \
140         alternative_insn insn1, insn2, cap, IS_ENABLED(cfg)
141
142
143 /*
144  * Generate the assembly for UAO alternatives with exception table entries.
145  * This is complicated as there is no post-increment or pair versions of the
146  * unprivileged instructions, and USER() only works for single instructions.
147  */
148 #ifdef CONFIG_ARM64_UAO
149         .macro uao_ldp l, reg1, reg2, addr, post_inc
150                 alternative_if_not ARM64_HAS_UAO
151 8888:                   ldp     \reg1, \reg2, [\addr], \post_inc;
152 8889:                   nop;
153                         nop;
154                 alternative_else
155                         ldtr    \reg1, [\addr];
156                         ldtr    \reg2, [\addr, #8];
157                         add     \addr, \addr, \post_inc;
158                 alternative_endif
159
160                 .section __ex_table,"a";
161                 .align  3;
162                 .quad   8888b,\l;
163                 .quad   8889b,\l;
164                 .previous;
165         .endm
166
167         .macro uao_stp l, reg1, reg2, addr, post_inc
168                 alternative_if_not ARM64_HAS_UAO
169 8888:                   stp     \reg1, \reg2, [\addr], \post_inc;
170 8889:                   nop;
171                         nop;
172                 alternative_else
173                         sttr    \reg1, [\addr];
174                         sttr    \reg2, [\addr, #8];
175                         add     \addr, \addr, \post_inc;
176                 alternative_endif
177
178                 .section __ex_table,"a";
179                 .align  3;
180                 .quad   8888b,\l;
181                 .quad   8889b,\l;
182                 .previous
183         .endm
184
185         .macro uao_user_alternative l, inst, alt_inst, reg, addr, post_inc
186                 alternative_if_not ARM64_HAS_UAO
187 8888:                   \inst   \reg, [\addr], \post_inc;
188                         nop;
189                 alternative_else
190                         \alt_inst       \reg, [\addr];
191                         add             \addr, \addr, \post_inc;
192                 alternative_endif
193
194                 .section __ex_table,"a";
195                 .align  3;
196                 .quad   8888b,\l;
197                 .previous
198         .endm
199 #else
200         .macro uao_ldp l, reg1, reg2, addr, post_inc
201                 USER(\l, ldp \reg1, \reg2, [\addr], \post_inc)
202         .endm
203         .macro uao_stp l, reg1, reg2, addr, post_inc
204                 USER(\l, stp \reg1, \reg2, [\addr], \post_inc)
205         .endm
206         .macro uao_user_alternative l, inst, alt_inst, reg, addr, post_inc
207                 USER(\l, \inst \reg, [\addr], \post_inc)
208         .endm
209 #endif
210
211 #endif  /*  __ASSEMBLY__  */
212
213 /*
214  * Usage: asm(ALTERNATIVE(oldinstr, newinstr, feature));
215  *
216  * Usage: asm(ALTERNATIVE(oldinstr, newinstr, feature, CONFIG_FOO));
217  * N.B. If CONFIG_FOO is specified, but not selected, the whole block
218  *      will be omitted, including oldinstr.
219  */
220 #define ALTERNATIVE(oldinstr, newinstr, ...)   \
221         _ALTERNATIVE_CFG(oldinstr, newinstr, __VA_ARGS__, 1)
222
223 #endif /* __ASM_ALTERNATIVE_H */