blackfin: fix some bf5xx boards build for missing <linux/gpio.h>
[cascardo/linux.git] / arch / blackfin / mach-bf537 / boards / cm_bf537e.c
1 /*
2  * Copyright 2004-2009 Analog Devices Inc.
3  *           2008-2009 Bluetechnix
4  *                2005 National ICT Australia (NICTA)
5  *                      Aidan Williams <aidan@nicta.com.au>
6  *
7  * Licensed under the GPL-2 or later.
8  */
9
10 #include <linux/device.h>
11 #include <linux/export.h>
12 #include <linux/etherdevice.h>
13 #include <linux/platform_device.h>
14 #include <linux/mtd/mtd.h>
15 #include <linux/mtd/partitions.h>
16 #include <linux/mtd/physmap.h>
17 #include <linux/spi/spi.h>
18 #include <linux/spi/flash.h>
19 #if IS_ENABLED(CONFIG_USB_ISP1362_HCD)
20 #include <linux/usb/isp1362.h>
21 #endif
22 #include <linux/ata_platform.h>
23 #include <linux/irq.h>
24 #include <linux/gpio.h>
25 #include <asm/dma.h>
26 #include <asm/bfin5xx_spi.h>
27 #include <asm/portmux.h>
28 #include <asm/dpmc.h>
29 #include <asm/bfin_sport.h>
30
31 /*
32  * Name the Board for the /proc/cpuinfo
33  */
34 const char bfin_board_name[] = "Bluetechnix CM BF537E";
35
36 #if IS_ENABLED(CONFIG_SPI_BFIN5XX)
37 /* all SPI peripherals info goes here */
38
39 #if IS_ENABLED(CONFIG_MTD_M25P80)
40 static struct mtd_partition bfin_spi_flash_partitions[] = {
41         {
42                 .name = "bootloader(spi)",
43                 .size = 0x00020000,
44                 .offset = 0,
45                 .mask_flags = MTD_CAP_ROM
46         }, {
47                 .name = "linux kernel(spi)",
48                 .size = 0xe0000,
49                 .offset = 0x20000
50         }, {
51                 .name = "file system(spi)",
52                 .size = 0x700000,
53                 .offset = 0x00100000,
54         }
55 };
56
57 static struct flash_platform_data bfin_spi_flash_data = {
58         .name = "m25p80",
59         .parts = bfin_spi_flash_partitions,
60         .nr_parts = ARRAY_SIZE(bfin_spi_flash_partitions),
61         .type = "m25p64",
62 };
63
64 /* SPI flash chip (m25p64) */
65 static struct bfin5xx_spi_chip spi_flash_chip_info = {
66         .enable_dma = 0,         /* use dma transfer with this chip*/
67 };
68 #endif
69
70 #if IS_ENABLED(CONFIG_MMC_SPI)
71 static struct bfin5xx_spi_chip  mmc_spi_chip_info = {
72         .enable_dma = 0,
73 };
74 #endif
75
76 static struct spi_board_info bfin_spi_board_info[] __initdata = {
77 #if IS_ENABLED(CONFIG_MTD_M25P80)
78         {
79                 /* the modalias must be the same as spi device driver name */
80                 .modalias = "m25p80", /* Name of spi_driver for this device */
81                 .max_speed_hz = 25000000,     /* max spi clock (SCK) speed in HZ */
82                 .bus_num = 0, /* Framework bus number */
83                 .chip_select = 1, /* Framework chip select. On STAMP537 it is SPISSEL1*/
84                 .platform_data = &bfin_spi_flash_data,
85                 .controller_data = &spi_flash_chip_info,
86                 .mode = SPI_MODE_3,
87         },
88 #endif
89
90 #if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AD183X)
91         {
92                 .modalias = "ad183x",
93                 .max_speed_hz = 3125000,     /* max spi clock (SCK) speed in HZ */
94                 .bus_num = 0,
95                 .chip_select = 4,
96         },
97 #endif
98
99 #if IS_ENABLED(CONFIG_MMC_SPI)
100         {
101                 .modalias = "mmc_spi",
102                 .max_speed_hz = 20000000,     /* max spi clock (SCK) speed in HZ */
103                 .bus_num = 0,
104                 .chip_select = 1,
105                 .controller_data = &mmc_spi_chip_info,
106                 .mode = SPI_MODE_3,
107         },
108 #endif
109 };
110
111 /* SPI (0) */
112 static struct resource bfin_spi0_resource[] = {
113         [0] = {
114                 .start = SPI0_REGBASE,
115                 .end   = SPI0_REGBASE + 0xFF,
116                 .flags = IORESOURCE_MEM,
117                 },
118         [1] = {
119                 .start = CH_SPI,
120                 .end   = CH_SPI,
121                 .flags = IORESOURCE_DMA,
122         },
123         [2] = {
124                 .start = IRQ_SPI,
125                 .end   = IRQ_SPI,
126                 .flags = IORESOURCE_IRQ,
127         },
128 };
129
130 /* SPI controller data */
131 static struct bfin5xx_spi_master bfin_spi0_info = {
132         .num_chipselect = 8,
133         .enable_dma = 1,  /* master has the ability to do dma transfer */
134         .pin_req = {P_SPI0_SCK, P_SPI0_MISO, P_SPI0_MOSI, 0},
135 };
136
137 static struct platform_device bfin_spi0_device = {
138         .name = "bfin-spi",
139         .id = 0, /* Bus number */
140         .num_resources = ARRAY_SIZE(bfin_spi0_resource),
141         .resource = bfin_spi0_resource,
142         .dev = {
143                 .platform_data = &bfin_spi0_info, /* Passed to driver */
144         },
145 };
146 #endif  /* spi master and devices */
147
148 #if IS_ENABLED(CONFIG_SPI_BFIN_SPORT)
149
150 /* SPORT SPI controller data */
151 static struct bfin5xx_spi_master bfin_sport_spi0_info = {
152         .num_chipselect = MAX_BLACKFIN_GPIOS,
153         .enable_dma = 0,  /* master don't support DMA */
154         .pin_req = {P_SPORT0_DTPRI, P_SPORT0_TSCLK, P_SPORT0_DRPRI,
155                 P_SPORT0_RSCLK, P_SPORT0_TFS, P_SPORT0_RFS, 0},
156 };
157
158 static struct resource bfin_sport_spi0_resource[] = {
159         [0] = {
160                 .start = SPORT0_TCR1,
161                 .end   = SPORT0_TCR1 + 0xFF,
162                 .flags = IORESOURCE_MEM,
163                 },
164         [1] = {
165                 .start = IRQ_SPORT0_ERROR,
166                 .end   = IRQ_SPORT0_ERROR,
167                 .flags = IORESOURCE_IRQ,
168                 },
169 };
170
171 static struct platform_device bfin_sport_spi0_device = {
172         .name = "bfin-sport-spi",
173         .id = 1, /* Bus number */
174         .num_resources = ARRAY_SIZE(bfin_sport_spi0_resource),
175         .resource = bfin_sport_spi0_resource,
176         .dev = {
177                 .platform_data = &bfin_sport_spi0_info, /* Passed to driver */
178         },
179 };
180
181 static struct bfin5xx_spi_master bfin_sport_spi1_info = {
182         .num_chipselect = MAX_BLACKFIN_GPIOS,
183         .enable_dma = 0,  /* master don't support DMA */
184         .pin_req = {P_SPORT1_DTPRI, P_SPORT1_TSCLK, P_SPORT1_DRPRI,
185                 P_SPORT1_RSCLK, P_SPORT1_TFS, P_SPORT1_RFS, 0},
186 };
187
188 static struct resource bfin_sport_spi1_resource[] = {
189         [0] = {
190                 .start = SPORT1_TCR1,
191                 .end   = SPORT1_TCR1 + 0xFF,
192                 .flags = IORESOURCE_MEM,
193                 },
194         [1] = {
195                 .start = IRQ_SPORT1_ERROR,
196                 .end   = IRQ_SPORT1_ERROR,
197                 .flags = IORESOURCE_IRQ,
198                 },
199 };
200
201 static struct platform_device bfin_sport_spi1_device = {
202         .name = "bfin-sport-spi",
203         .id = 2, /* Bus number */
204         .num_resources = ARRAY_SIZE(bfin_sport_spi1_resource),
205         .resource = bfin_sport_spi1_resource,
206         .dev = {
207                 .platform_data = &bfin_sport_spi1_info, /* Passed to driver */
208         },
209 };
210
211 #endif  /* sport spi master and devices */
212
213 #if IS_ENABLED(CONFIG_RTC_DRV_BFIN)
214 static struct platform_device rtc_device = {
215         .name = "rtc-bfin",
216         .id   = -1,
217 };
218 #endif
219
220 #if IS_ENABLED(CONFIG_FB_HITACHI_TX09)
221 static struct platform_device hitachi_fb_device = {
222         .name = "hitachi-tx09",
223 };
224 #endif
225
226 #if IS_ENABLED(CONFIG_SMC91X)
227 #include <linux/smc91x.h>
228
229 static struct smc91x_platdata smc91x_info = {
230         .flags = SMC91X_USE_16BIT | SMC91X_NOWAIT,
231         .leda = RPC_LED_100_10,
232         .ledb = RPC_LED_TX_RX,
233 };
234
235 static struct resource smc91x_resources[] = {
236         {
237                 .start = 0x20200300,
238                 .end = 0x20200300 + 16,
239                 .flags = IORESOURCE_MEM,
240         }, {
241                 .start = IRQ_PF14,
242                 .end = IRQ_PF14,
243                 .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
244                 },
245 };
246
247 static struct platform_device smc91x_device = {
248         .name = "smc91x",
249         .id = 0,
250         .num_resources = ARRAY_SIZE(smc91x_resources),
251         .resource = smc91x_resources,
252         .dev    = {
253                 .platform_data  = &smc91x_info,
254         },
255 };
256 #endif
257
258 #if IS_ENABLED(CONFIG_USB_ISP1362_HCD)
259 static struct resource isp1362_hcd_resources[] = {
260         {
261                 .start = 0x20308000,
262                 .end = 0x20308000,
263                 .flags = IORESOURCE_MEM,
264         }, {
265                 .start = 0x20308004,
266                 .end = 0x20308004,
267                 .flags = IORESOURCE_MEM,
268         }, {
269                 .start = IRQ_PG15,
270                 .end = IRQ_PG15,
271                 .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE,
272         },
273 };
274
275 static struct isp1362_platform_data isp1362_priv = {
276         .sel15Kres = 1,
277         .clknotstop = 0,
278         .oc_enable = 0,
279         .int_act_high = 0,
280         .int_edge_triggered = 0,
281         .remote_wakeup_connected = 0,
282         .no_power_switching = 1,
283         .power_switching_mode = 0,
284 };
285
286 static struct platform_device isp1362_hcd_device = {
287         .name = "isp1362-hcd",
288         .id = 0,
289         .dev = {
290                 .platform_data = &isp1362_priv,
291         },
292         .num_resources = ARRAY_SIZE(isp1362_hcd_resources),
293         .resource = isp1362_hcd_resources,
294 };
295 #endif
296
297 #if IS_ENABLED(CONFIG_USB_NET2272)
298 static struct resource net2272_bfin_resources[] = {
299         {
300                 .start = 0x20300000,
301                 .end = 0x20300000 + 0x100,
302                 .flags = IORESOURCE_MEM,
303         }, {
304                 .start = IRQ_PG13,
305                 .end = IRQ_PG13,
306                 .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
307         },
308 };
309
310 static struct platform_device net2272_bfin_device = {
311         .name = "net2272",
312         .id = -1,
313         .num_resources = ARRAY_SIZE(net2272_bfin_resources),
314         .resource = net2272_bfin_resources,
315 };
316 #endif
317
318 #if IS_ENABLED(CONFIG_MTD_GPIO_ADDR)
319 static struct mtd_partition cm_partitions[] = {
320         {
321                 .name   = "bootloader(nor)",
322                 .size   = 0x40000,
323                 .offset = 0,
324         }, {
325                 .name   = "linux kernel(nor)",
326                 .size   = 0x100000,
327                 .offset = MTDPART_OFS_APPEND,
328         }, {
329                 .name   = "file system(nor)",
330                 .size   = MTDPART_SIZ_FULL,
331                 .offset = MTDPART_OFS_APPEND,
332         }
333 };
334
335 static struct physmap_flash_data cm_flash_data = {
336         .width    = 2,
337         .parts    = cm_partitions,
338         .nr_parts = ARRAY_SIZE(cm_partitions),
339 };
340
341 static unsigned cm_flash_gpios[] = { GPIO_PF4 };
342
343 static struct resource cm_flash_resource[] = {
344         {
345                 .name  = "cfi_probe",
346                 .start = 0x20000000,
347                 .end   = 0x201fffff,
348                 .flags = IORESOURCE_MEM,
349         }, {
350                 .start = (unsigned long)cm_flash_gpios,
351                 .end   = ARRAY_SIZE(cm_flash_gpios),
352                 .flags = IORESOURCE_IRQ,
353         }
354 };
355
356 static struct platform_device cm_flash_device = {
357         .name          = "gpio-addr-flash",
358         .id            = 0,
359         .dev = {
360                 .platform_data = &cm_flash_data,
361         },
362         .num_resources = ARRAY_SIZE(cm_flash_resource),
363         .resource      = cm_flash_resource,
364 };
365 #endif
366
367 #if IS_ENABLED(CONFIG_SERIAL_BFIN)
368 #ifdef CONFIG_SERIAL_BFIN_UART0
369 static struct resource bfin_uart0_resources[] = {
370         {
371                 .start = UART0_THR,
372                 .end = UART0_GCTL+2,
373                 .flags = IORESOURCE_MEM,
374         },
375         {
376                 .start = IRQ_UART0_TX,
377                 .end = IRQ_UART0_TX,
378                 .flags = IORESOURCE_IRQ,
379         },
380         {
381                 .start = IRQ_UART0_RX,
382                 .end = IRQ_UART0_RX,
383                 .flags = IORESOURCE_IRQ,
384         },
385         {
386                 .start = IRQ_UART0_ERROR,
387                 .end = IRQ_UART0_ERROR,
388                 .flags = IORESOURCE_IRQ,
389         },
390         {
391                 .start = CH_UART0_TX,
392                 .end = CH_UART0_TX,
393                 .flags = IORESOURCE_DMA,
394         },
395         {
396                 .start = CH_UART0_RX,
397                 .end = CH_UART0_RX,
398                 .flags = IORESOURCE_DMA,
399         },
400 #ifdef CONFIG_BFIN_UART0_CTSRTS
401         {
402                 /*
403                  * Refer to arch/blackfin/mach-xxx/include/mach/gpio.h for the GPIO map.
404                  */
405                 .start = -1,
406                 .end = -1,
407                 .flags = IORESOURCE_IO,
408         },
409         {
410                 /*
411                  * Refer to arch/blackfin/mach-xxx/include/mach/gpio.h for the GPIO map.
412                  */
413                 .start = -1,
414                 .end = -1,
415                 .flags = IORESOURCE_IO,
416         },
417 #endif
418 };
419
420 static unsigned short bfin_uart0_peripherals[] = {
421         P_UART0_TX, P_UART0_RX, 0
422 };
423
424 static struct platform_device bfin_uart0_device = {
425         .name = "bfin-uart",
426         .id = 0,
427         .num_resources = ARRAY_SIZE(bfin_uart0_resources),
428         .resource = bfin_uart0_resources,
429         .dev = {
430                 .platform_data = &bfin_uart0_peripherals, /* Passed to driver */
431         },
432 };
433 #endif
434 #ifdef CONFIG_SERIAL_BFIN_UART1
435 static struct resource bfin_uart1_resources[] = {
436         {
437                 .start = UART1_THR,
438                 .end = UART1_GCTL+2,
439                 .flags = IORESOURCE_MEM,
440         },
441         {
442                 .start = IRQ_UART1_TX,
443                 .end = IRQ_UART1_TX,
444                 .flags = IORESOURCE_IRQ,
445         },
446         {
447                 .start = IRQ_UART1_RX,
448                 .end = IRQ_UART1_RX,
449                 .flags = IORESOURCE_IRQ,
450         },
451         {
452                 .start = IRQ_UART1_ERROR,
453                 .end = IRQ_UART1_ERROR,
454                 .flags = IORESOURCE_IRQ,
455         },
456         {
457                 .start = CH_UART1_TX,
458                 .end = CH_UART1_TX,
459                 .flags = IORESOURCE_DMA,
460         },
461         {
462                 .start = CH_UART1_RX,
463                 .end = CH_UART1_RX,
464                 .flags = IORESOURCE_DMA,
465         },
466 #ifdef CONFIG_BFIN_UART1_CTSRTS
467         {
468                 /*
469                  * Refer to arch/blackfin/mach-xxx/include/mach/gpio.h for the GPIO map.
470                  */
471                 .start = -1,
472                 .end = -1,
473                 .flags = IORESOURCE_IO,
474         },
475         {
476                 /*
477                  * Refer to arch/blackfin/mach-xxx/include/mach/gpio.h for the GPIO map.
478                  */
479                 .start = -1,
480                 .end = -1,
481                 .flags = IORESOURCE_IO,
482         },
483 #endif
484 };
485
486 static unsigned short bfin_uart1_peripherals[] = {
487         P_UART1_TX, P_UART1_RX, 0
488 };
489
490 static struct platform_device bfin_uart1_device = {
491         .name = "bfin-uart",
492         .id = 1,
493         .num_resources = ARRAY_SIZE(bfin_uart1_resources),
494         .resource = bfin_uart1_resources,
495         .dev = {
496                 .platform_data = &bfin_uart1_peripherals, /* Passed to driver */
497         },
498 };
499 #endif
500 #endif
501
502 #if IS_ENABLED(CONFIG_BFIN_SIR)
503 #ifdef CONFIG_BFIN_SIR0
504 static struct resource bfin_sir0_resources[] = {
505         {
506                 .start = 0xFFC00400,
507                 .end = 0xFFC004FF,
508                 .flags = IORESOURCE_MEM,
509         },
510         {
511                 .start = IRQ_UART0_RX,
512                 .end = IRQ_UART0_RX+1,
513                 .flags = IORESOURCE_IRQ,
514         },
515         {
516                 .start = CH_UART0_RX,
517                 .end = CH_UART0_RX+1,
518                 .flags = IORESOURCE_DMA,
519         },
520 };
521 static struct platform_device bfin_sir0_device = {
522         .name = "bfin_sir",
523         .id = 0,
524         .num_resources = ARRAY_SIZE(bfin_sir0_resources),
525         .resource = bfin_sir0_resources,
526 };
527 #endif
528 #ifdef CONFIG_BFIN_SIR1
529 static struct resource bfin_sir1_resources[] = {
530         {
531                 .start = 0xFFC02000,
532                 .end = 0xFFC020FF,
533                 .flags = IORESOURCE_MEM,
534         },
535         {
536                 .start = IRQ_UART1_RX,
537                 .end = IRQ_UART1_RX+1,
538                 .flags = IORESOURCE_IRQ,
539         },
540         {
541                 .start = CH_UART1_RX,
542                 .end = CH_UART1_RX+1,
543                 .flags = IORESOURCE_DMA,
544         },
545 };
546 static struct platform_device bfin_sir1_device = {
547         .name = "bfin_sir",
548         .id = 1,
549         .num_resources = ARRAY_SIZE(bfin_sir1_resources),
550         .resource = bfin_sir1_resources,
551 };
552 #endif
553 #endif
554
555 #if IS_ENABLED(CONFIG_I2C_BLACKFIN_TWI)
556 static const u16 bfin_twi0_pins[] = {P_TWI0_SCL, P_TWI0_SDA, 0};
557
558 static struct resource bfin_twi0_resource[] = {
559         [0] = {
560                 .start = TWI0_REGBASE,
561                 .end   = TWI0_REGBASE,
562                 .flags = IORESOURCE_MEM,
563         },
564         [1] = {
565                 .start = IRQ_TWI,
566                 .end   = IRQ_TWI,
567                 .flags = IORESOURCE_IRQ,
568         },
569 };
570
571 static struct platform_device i2c_bfin_twi_device = {
572         .name = "i2c-bfin-twi",
573         .id = 0,
574         .num_resources = ARRAY_SIZE(bfin_twi0_resource),
575         .resource = bfin_twi0_resource,
576         .dev = {
577                 .platform_data = &bfin_twi0_pins,
578         },
579 };
580 #endif
581
582 #if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT) \
583 || IS_ENABLED(CONFIG_BFIN_SPORT)
584 unsigned short bfin_sport0_peripherals[] = {
585         P_SPORT0_TFS, P_SPORT0_DTPRI, P_SPORT0_TSCLK, P_SPORT0_RFS,
586         P_SPORT0_DRPRI, P_SPORT0_RSCLK, P_SPORT0_DRSEC, P_SPORT0_DTSEC, 0
587 };
588 #endif
589 #if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT)
590 #ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
591 static struct resource bfin_sport0_uart_resources[] = {
592         {
593                 .start = SPORT0_TCR1,
594                 .end = SPORT0_MRCS3+4,
595                 .flags = IORESOURCE_MEM,
596         },
597         {
598                 .start = IRQ_SPORT0_RX,
599                 .end = IRQ_SPORT0_RX+1,
600                 .flags = IORESOURCE_IRQ,
601         },
602         {
603                 .start = IRQ_SPORT0_ERROR,
604                 .end = IRQ_SPORT0_ERROR,
605                 .flags = IORESOURCE_IRQ,
606         },
607 };
608
609 static struct platform_device bfin_sport0_uart_device = {
610         .name = "bfin-sport-uart",
611         .id = 0,
612         .num_resources = ARRAY_SIZE(bfin_sport0_uart_resources),
613         .resource = bfin_sport0_uart_resources,
614         .dev = {
615                 .platform_data = &bfin_sport0_peripherals, /* Passed to driver */
616         },
617 };
618 #endif
619 #ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
620 static struct resource bfin_sport1_uart_resources[] = {
621         {
622                 .start = SPORT1_TCR1,
623                 .end = SPORT1_MRCS3+4,
624                 .flags = IORESOURCE_MEM,
625         },
626         {
627                 .start = IRQ_SPORT1_RX,
628                 .end = IRQ_SPORT1_RX+1,
629                 .flags = IORESOURCE_IRQ,
630         },
631         {
632                 .start = IRQ_SPORT1_ERROR,
633                 .end = IRQ_SPORT1_ERROR,
634                 .flags = IORESOURCE_IRQ,
635         },
636 };
637
638 static unsigned short bfin_sport1_peripherals[] = {
639         P_SPORT1_TFS, P_SPORT1_DTPRI, P_SPORT1_TSCLK, P_SPORT1_RFS,
640         P_SPORT1_DRPRI, P_SPORT1_RSCLK, 0
641 };
642
643 static struct platform_device bfin_sport1_uart_device = {
644         .name = "bfin-sport-uart",
645         .id = 1,
646         .num_resources = ARRAY_SIZE(bfin_sport1_uart_resources),
647         .resource = bfin_sport1_uart_resources,
648         .dev = {
649                 .platform_data = &bfin_sport1_peripherals, /* Passed to driver */
650         },
651 };
652 #endif
653 #endif
654 #if IS_ENABLED(CONFIG_BFIN_SPORT)
655 static struct resource bfin_sport0_resources[] = {
656         {
657                 .start = SPORT0_TCR1,
658                 .end = SPORT0_MRCS3+4,
659                 .flags = IORESOURCE_MEM,
660         },
661         {
662                 .start = IRQ_SPORT0_RX,
663                 .end = IRQ_SPORT0_RX+1,
664                 .flags = IORESOURCE_IRQ,
665         },
666         {
667                 .start = IRQ_SPORT0_TX,
668                 .end = IRQ_SPORT0_TX+1,
669                 .flags = IORESOURCE_IRQ,
670         },
671         {
672                 .start = IRQ_SPORT0_ERROR,
673                 .end = IRQ_SPORT0_ERROR,
674                 .flags = IORESOURCE_IRQ,
675         },
676         {
677                 .start = CH_SPORT0_TX,
678                 .end = CH_SPORT0_TX,
679                 .flags = IORESOURCE_DMA,
680         },
681         {
682                 .start = CH_SPORT0_RX,
683                 .end = CH_SPORT0_RX,
684                 .flags = IORESOURCE_DMA,
685         },
686 };
687 static struct platform_device bfin_sport0_device = {
688         .name = "bfin_sport_raw",
689         .id = 0,
690         .num_resources = ARRAY_SIZE(bfin_sport0_resources),
691         .resource = bfin_sport0_resources,
692         .dev = {
693                 .platform_data = &bfin_sport0_peripherals, /* Passed to driver */
694         },
695 };
696 #endif
697
698 #if IS_ENABLED(CONFIG_BFIN_MAC)
699 #include <linux/bfin_mac.h>
700 static const unsigned short bfin_mac_peripherals[] = P_MII0;
701
702 static struct bfin_phydev_platform_data bfin_phydev_data[] = {
703         {
704                 .addr = 1,
705                 .irq = IRQ_MAC_PHYINT,
706         },
707 };
708
709 static struct bfin_mii_bus_platform_data bfin_mii_bus_data = {
710         .phydev_number = 1,
711         .phydev_data = bfin_phydev_data,
712         .phy_mode = PHY_INTERFACE_MODE_MII,
713         .mac_peripherals = bfin_mac_peripherals,
714 };
715
716 static struct platform_device bfin_mii_bus = {
717         .name = "bfin_mii_bus",
718         .dev = {
719                 .platform_data = &bfin_mii_bus_data,
720         }
721 };
722
723 static struct platform_device bfin_mac_device = {
724         .name = "bfin_mac",
725         .dev = {
726                 .platform_data = &bfin_mii_bus,
727         }
728 };
729 #endif
730
731 #if IS_ENABLED(CONFIG_PATA_PLATFORM)
732 #define PATA_INT        IRQ_PF14
733
734 static struct pata_platform_info bfin_pata_platform_data = {
735         .ioport_shift = 2,
736         .irq_type = IRQF_TRIGGER_HIGH,
737 };
738
739 static struct resource bfin_pata_resources[] = {
740         {
741                 .start = 0x2030C000,
742                 .end = 0x2030C01F,
743                 .flags = IORESOURCE_MEM,
744         },
745         {
746                 .start = 0x2030D018,
747                 .end = 0x2030D01B,
748                 .flags = IORESOURCE_MEM,
749         },
750         {
751                 .start = PATA_INT,
752                 .end = PATA_INT,
753                 .flags = IORESOURCE_IRQ,
754         },
755 };
756
757 static struct platform_device bfin_pata_device = {
758         .name = "pata_platform",
759         .id = -1,
760         .num_resources = ARRAY_SIZE(bfin_pata_resources),
761         .resource = bfin_pata_resources,
762         .dev = {
763                 .platform_data = &bfin_pata_platform_data,
764         }
765 };
766 #endif
767
768 static const unsigned int cclk_vlev_datasheet[] =
769 {
770         VRPAIR(VLEV_085, 250000000),
771         VRPAIR(VLEV_090, 376000000),
772         VRPAIR(VLEV_095, 426000000),
773         VRPAIR(VLEV_100, 426000000),
774         VRPAIR(VLEV_105, 476000000),
775         VRPAIR(VLEV_110, 476000000),
776         VRPAIR(VLEV_115, 476000000),
777         VRPAIR(VLEV_120, 500000000),
778         VRPAIR(VLEV_125, 533000000),
779         VRPAIR(VLEV_130, 600000000),
780 };
781
782 static struct bfin_dpmc_platform_data bfin_dmpc_vreg_data = {
783         .tuple_tab = cclk_vlev_datasheet,
784         .tabsize = ARRAY_SIZE(cclk_vlev_datasheet),
785         .vr_settling_time = 25 /* us */,
786 };
787
788 static struct platform_device bfin_dpmc = {
789         .name = "bfin dpmc",
790         .dev = {
791                 .platform_data = &bfin_dmpc_vreg_data,
792         },
793 };
794
795 static struct platform_device *cm_bf537e_devices[] __initdata = {
796
797         &bfin_dpmc,
798
799 #if IS_ENABLED(CONFIG_BFIN_SPORT)
800         &bfin_sport0_device,
801 #endif
802
803 #if IS_ENABLED(CONFIG_FB_HITACHI_TX09)
804         &hitachi_fb_device,
805 #endif
806
807 #if IS_ENABLED(CONFIG_RTC_DRV_BFIN)
808         &rtc_device,
809 #endif
810
811 #if IS_ENABLED(CONFIG_SERIAL_BFIN)
812 #ifdef CONFIG_SERIAL_BFIN_UART0
813         &bfin_uart0_device,
814 #endif
815 #ifdef CONFIG_SERIAL_BFIN_UART1
816         &bfin_uart1_device,
817 #endif
818 #endif
819
820 #if IS_ENABLED(CONFIG_BFIN_SIR)
821 #ifdef CONFIG_BFIN_SIR0
822         &bfin_sir0_device,
823 #endif
824 #ifdef CONFIG_BFIN_SIR1
825         &bfin_sir1_device,
826 #endif
827 #endif
828
829 #if IS_ENABLED(CONFIG_I2C_BLACKFIN_TWI)
830         &i2c_bfin_twi_device,
831 #endif
832
833 #if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT)
834 #ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
835         &bfin_sport0_uart_device,
836 #endif
837 #ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
838         &bfin_sport1_uart_device,
839 #endif
840 #endif
841
842 #if IS_ENABLED(CONFIG_USB_ISP1362_HCD)
843         &isp1362_hcd_device,
844 #endif
845
846 #if IS_ENABLED(CONFIG_SMC91X)
847         &smc91x_device,
848 #endif
849
850 #if IS_ENABLED(CONFIG_BFIN_MAC)
851         &bfin_mii_bus,
852         &bfin_mac_device,
853 #endif
854
855 #if IS_ENABLED(CONFIG_USB_NET2272)
856         &net2272_bfin_device,
857 #endif
858
859 #if IS_ENABLED(CONFIG_SPI_BFIN5XX)
860         &bfin_spi0_device,
861 #endif
862
863 #if IS_ENABLED(CONFIG_SPI_BFIN_SPORT)
864         &bfin_sport_spi0_device,
865         &bfin_sport_spi1_device,
866 #endif
867
868 #if IS_ENABLED(CONFIG_PATA_PLATFORM)
869         &bfin_pata_device,
870 #endif
871
872 #if IS_ENABLED(CONFIG_MTD_GPIO_ADDR)
873         &cm_flash_device,
874 #endif
875 };
876
877 static int __init net2272_init(void)
878 {
879 #if IS_ENABLED(CONFIG_USB_NET2272)
880         int ret;
881
882         ret = gpio_request(GPIO_PG14, "net2272");
883         if (ret)
884                 return ret;
885
886         /* Reset USB Chip, PG14 */
887         gpio_direction_output(GPIO_PG14, 0);
888         mdelay(2);
889         gpio_set_value(GPIO_PG14, 1);
890 #endif
891
892         return 0;
893 }
894
895 static int __init cm_bf537e_init(void)
896 {
897         printk(KERN_INFO "%s(): registering device resources\n", __func__);
898         platform_add_devices(cm_bf537e_devices, ARRAY_SIZE(cm_bf537e_devices));
899 #if IS_ENABLED(CONFIG_SPI_BFIN5XX)
900         spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
901 #endif
902
903 #if IS_ENABLED(CONFIG_PATA_PLATFORM)
904         irq_set_status_flags(PATA_INT, IRQ_NOAUTOEN);
905 #endif
906
907         if (net2272_init())
908                 pr_warning("unable to configure net2272; it probably won't work\n");
909
910         return 0;
911 }
912
913 arch_initcall(cm_bf537e_init);
914
915 static struct platform_device *cm_bf537e_early_devices[] __initdata = {
916 #if defined(CONFIG_SERIAL_BFIN_CONSOLE) || defined(CONFIG_EARLY_PRINTK)
917 #ifdef CONFIG_SERIAL_BFIN_UART0
918         &bfin_uart0_device,
919 #endif
920 #ifdef CONFIG_SERIAL_BFIN_UART1
921         &bfin_uart1_device,
922 #endif
923 #endif
924
925 #if defined(CONFIG_SERIAL_BFIN_SPORT_CONSOLE)
926 #ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
927         &bfin_sport0_uart_device,
928 #endif
929 #ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
930         &bfin_sport1_uart_device,
931 #endif
932 #endif
933 };
934
935 void __init native_machine_early_platform_add_devices(void)
936 {
937         printk(KERN_INFO "register early platform devices\n");
938         early_platform_add_devices(cm_bf537e_early_devices,
939                 ARRAY_SIZE(cm_bf537e_early_devices));
940 }
941
942 int bfin_get_ether_addr(char *addr)
943 {
944         return 1;
945 }
946 EXPORT_SYMBOL(bfin_get_ether_addr);