arch/mips/cavium-octeon/executive/cvmx-helper-rgmii.c

   1 /***********************license start***************
   2  * Author: Cavium Networks
   3  *
   4  * Contact: support@caviumnetworks.com
   5  * This file is part of the OCTEON SDK
   6  *
   7  * Copyright (c) 2003-2008 Cavium Networks
   8  *
   9  * This file is free software; you can redistribute it and/or modify
  10  * it under the terms of the GNU General Public License, Version 2, as
  11  * published by the Free Software Foundation.
  12  *
  13  * This file is distributed in the hope that it will be useful, but
  14  * AS-IS and WITHOUT ANY WARRANTY; without even the implied warranty
  15  * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE, TITLE, or
  16  * NONINFRINGEMENT.  See the GNU General Public License for more
  17  * details.
  18  *
  19  * You should have received a copy of the GNU General Public License
  20  * along with this file; if not, write to the Free Software
  21  * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
  22  * or visit http://www.gnu.org/licenses/.
  23  *
  24  * This file may also be available under a different license from Cavium.
  25  * Contact Cavium Networks for more information
  26  ***********************license end**************************************/
  27
  28 /*
  29  * Functions for RGMII/GMII/MII initialization, configuration,
  30  * and monitoring.
  31  */
  32 #include <asm/octeon/octeon.h>
  33
  34 #include <asm/octeon/cvmx-config.h>
  35
  36 #include <asm/octeon/cvmx-pko.h>
  37 #include <asm/octeon/cvmx-helper.h>
  38 #include <asm/octeon/cvmx-helper-board.h>
  39
  40 #include <asm/octeon/cvmx-npi-defs.h>
  41 #include <asm/octeon/cvmx-gmxx-defs.h>
  42 #include <asm/octeon/cvmx-asxx-defs.h>
  43 #include <asm/octeon/cvmx-dbg-defs.h>
  44
  45 void __cvmx_interrupt_gmxx_enable(int interface);
  46 void __cvmx_interrupt_asxx_enable(int block);
  47
  48 /**
  49  * Probe RGMII ports and determine the number present
  50  *
  51  * @interface: Interface to probe
  52  *
  53  * Returns Number of RGMII/GMII/MII ports (0-4).
  54  */
  55 int __cvmx_helper_rgmii_probe(int interface)
  56 {
  57         int num_ports = 0;
  58         union cvmx_gmxx_inf_mode mode;
  59         mode.u64 = cvmx_read_csr(CVMX_GMXX_INF_MODE(interface));
  60
  61         if (mode.s.type) {
  62                 if (OCTEON_IS_MODEL(OCTEON_CN38XX)
  63                     || OCTEON_IS_MODEL(OCTEON_CN58XX)) {
  64                         cvmx_dprintf("ERROR: RGMII initialize called in "
  65                                      "SPI interface\n");
  66                 } else if (OCTEON_IS_MODEL(OCTEON_CN31XX)
  67                            || OCTEON_IS_MODEL(OCTEON_CN30XX)
  68                            || OCTEON_IS_MODEL(OCTEON_CN50XX)) {
  69                         /*
  70                          * On these chips "type" says we're in
  71                          * GMII/MII mode. This limits us to 2 ports
  72                          */
  73                         num_ports = 2;
  74                 } else {
  75                         cvmx_dprintf("ERROR: Unsupported Octeon model in %s\n",
  76                                      __func__);
  77                 }
  78         } else {
  79                 if (OCTEON_IS_MODEL(OCTEON_CN38XX)
  80                     || OCTEON_IS_MODEL(OCTEON_CN58XX)) {
  81                         num_ports = 4;
  82                 } else if (OCTEON_IS_MODEL(OCTEON_CN31XX)
  83                            || OCTEON_IS_MODEL(OCTEON_CN30XX)
  84                            || OCTEON_IS_MODEL(OCTEON_CN50XX)) {
  85                         num_ports = 3;
  86                 } else {
  87                         cvmx_dprintf("ERROR: Unsupported Octeon model in %s\n",
  88                                      __func__);
  89                 }
  90         }
  91         return num_ports;
  92 }
  93
  94 /**
  95  * Put an RGMII interface in loopback mode. Internal packets sent
  96  * out will be received back again on the same port. Externally
  97  * received packets will echo back out.
  98  *
  99  * @port:   IPD port number to loop.
 100  */
 101 void cvmx_helper_rgmii_internal_loopback(int port)
 102 {
 103         int interface = (port >> 4) & 1;
 104         int index = port & 0xf;
 105         uint64_t tmp;
 106
 107         union cvmx_gmxx_prtx_cfg gmx_cfg;
 108         gmx_cfg.u64 = 0;
 109         gmx_cfg.s.duplex = 1;
 110         gmx_cfg.s.slottime = 1;
 111         gmx_cfg.s.speed = 1;
 112         cvmx_write_csr(CVMX_GMXX_TXX_CLK(index, interface), 1);
 113         cvmx_write_csr(CVMX_GMXX_TXX_SLOT(index, interface), 0x200);
 114         cvmx_write_csr(CVMX_GMXX_TXX_BURST(index, interface), 0x2000);
 115         cvmx_write_csr(CVMX_GMXX_PRTX_CFG(index, interface), gmx_cfg.u64);
 116         tmp = cvmx_read_csr(CVMX_ASXX_PRT_LOOP(interface));
 117         cvmx_write_csr(CVMX_ASXX_PRT_LOOP(interface), (1 << index) | tmp);
 118         tmp = cvmx_read_csr(CVMX_ASXX_TX_PRT_EN(interface));
 119         cvmx_write_csr(CVMX_ASXX_TX_PRT_EN(interface), (1 << index) | tmp);
 120         tmp = cvmx_read_csr(CVMX_ASXX_RX_PRT_EN(interface));
 121         cvmx_write_csr(CVMX_ASXX_RX_PRT_EN(interface), (1 << index) | tmp);
 122         gmx_cfg.s.en = 1;
 123         cvmx_write_csr(CVMX_GMXX_PRTX_CFG(index, interface), gmx_cfg.u64);
 124 }
 125
 126 /**
 127  * Workaround ASX setup errata with CN38XX pass1
 128  *
 129  * @interface: Interface to setup
 130  * @port:      Port to setup (0..3)
 131  * @cpu_clock_hz:
 132  *                  Chip frequency in Hertz
 133  *
 134  * Returns Zero on success, negative on failure
 135  */
 136 static int __cvmx_helper_errata_asx_pass1(int interface, int port,
 137                                           int cpu_clock_hz)
 138 {
 139         /* Set hi water mark as per errata GMX-4 */
 140         if (cpu_clock_hz >= 325000000 && cpu_clock_hz < 375000000)
 141                 cvmx_write_csr(CVMX_ASXX_TX_HI_WATERX(port, interface), 12);
 142         else if (cpu_clock_hz >= 375000000 && cpu_clock_hz < 437000000)
 143                 cvmx_write_csr(CVMX_ASXX_TX_HI_WATERX(port, interface), 11);
 144         else if (cpu_clock_hz >= 437000000 && cpu_clock_hz < 550000000)
 145                 cvmx_write_csr(CVMX_ASXX_TX_HI_WATERX(port, interface), 10);
 146         else if (cpu_clock_hz >= 550000000 && cpu_clock_hz < 687000000)
 147                 cvmx_write_csr(CVMX_ASXX_TX_HI_WATERX(port, interface), 9);
 148         else
 149                 cvmx_dprintf("Illegal clock frequency (%d). "
 150                         "CVMX_ASXX_TX_HI_WATERX not set\n", cpu_clock_hz);
 151         return 0;
 152 }
 153
 154 /**
 155  * Configure all of the ASX, GMX, and PKO regsiters required
 156  * to get RGMII to function on the supplied interface.
 157  *
 158  * @interface: PKO Interface to configure (0 or 1)
 159  *
 160  * Returns Zero on success
 161  */
 162 int __cvmx_helper_rgmii_enable(int interface)
 163 {
 164         int num_ports = cvmx_helper_ports_on_interface(interface);
 165         int port;
 166         struct cvmx_sysinfo *sys_info_ptr = cvmx_sysinfo_get();
 167         union cvmx_gmxx_inf_mode mode;
 168         union cvmx_asxx_tx_prt_en asx_tx;
 169         union cvmx_asxx_rx_prt_en asx_rx;
 170
 171         mode.u64 = cvmx_read_csr(CVMX_GMXX_INF_MODE(interface));
 172
 173         if (mode.s.en == 0)
 174                 return -1;
 175         if ((OCTEON_IS_MODEL(OCTEON_CN38XX) ||
 176              OCTEON_IS_MODEL(OCTEON_CN58XX)) && mode.s.type == 1)
 177                 /* Ignore SPI interfaces */
 178                 return -1;
 179
 180         /* Configure the ASX registers needed to use the RGMII ports */
 181         asx_tx.u64 = 0;
 182         asx_tx.s.prt_en = cvmx_build_mask(num_ports);
 183         cvmx_write_csr(CVMX_ASXX_TX_PRT_EN(interface), asx_tx.u64);
 184
 185         asx_rx.u64 = 0;
 186         asx_rx.s.prt_en = cvmx_build_mask(num_ports);
 187         cvmx_write_csr(CVMX_ASXX_RX_PRT_EN(interface), asx_rx.u64);
 188
 189         /* Configure the GMX registers needed to use the RGMII ports */
 190         for (port = 0; port < num_ports; port++) {
 191                 /* Setting of CVMX_GMXX_TXX_THRESH has been moved to
 192                    __cvmx_helper_setup_gmx() */
 193
 194                 if (cvmx_octeon_is_pass1())
 195                         __cvmx_helper_errata_asx_pass1(interface, port,
 196                                                        sys_info_ptr->
 197                                                        cpu_clock_hz);
 198                 else {
 199                         /*
 200                          * Configure more flexible RGMII preamble
 201                          * checking. Pass 1 doesn't support this
 202                          * feature.
 203                          */
 204                         union cvmx_gmxx_rxx_frm_ctl frm_ctl;
 205                         frm_ctl.u64 =
 206                             cvmx_read_csr(CVMX_GMXX_RXX_FRM_CTL
 207                                           (port, interface));
 208                         /* New field, so must be compile time */
 209                         frm_ctl.s.pre_free = 1;
 210                         cvmx_write_csr(CVMX_GMXX_RXX_FRM_CTL(port, interface),
 211                                        frm_ctl.u64);
 212                 }
 213
 214                 /*
 215                  * Each pause frame transmitted will ask for about 10M
 216                  * bit times before resume.  If buffer space comes
 217                  * available before that time has expired, an XON
 218                  * pause frame (0 time) will be transmitted to restart
 219                  * the flow.
 220                  */
 221                 cvmx_write_csr(CVMX_GMXX_TXX_PAUSE_PKT_TIME(port, interface),
 222                                20000);
 223                 cvmx_write_csr(CVMX_GMXX_TXX_PAUSE_PKT_INTERVAL
 224                                (port, interface), 19000);
 225
 226                 if (OCTEON_IS_MODEL(OCTEON_CN50XX)) {
 227                         cvmx_write_csr(CVMX_ASXX_TX_CLK_SETX(port, interface),
 228                                        16);
 229                         cvmx_write_csr(CVMX_ASXX_RX_CLK_SETX(port, interface),
 230                                        16);
 231                 } else {
 232                         cvmx_write_csr(CVMX_ASXX_TX_CLK_SETX(port, interface),
 233                                        24);
 234                         cvmx_write_csr(CVMX_ASXX_RX_CLK_SETX(port, interface),
 235                                        24);
 236                 }
 237         }
 238
 239         __cvmx_helper_setup_gmx(interface, num_ports);
 240
 241         /* enable the ports now */
 242         for (port = 0; port < num_ports; port++) {
 243                 union cvmx_gmxx_prtx_cfg gmx_cfg;
 244
 245                 gmx_cfg.u64 =
 246                     cvmx_read_csr(CVMX_GMXX_PRTX_CFG(port, interface));
 247                 gmx_cfg.s.en = 1;
 248                 cvmx_write_csr(CVMX_GMXX_PRTX_CFG(port, interface),
 249                                gmx_cfg.u64);
 250         }
 251         __cvmx_interrupt_asxx_enable(interface);
 252         __cvmx_interrupt_gmxx_enable(interface);
 253
 254         return 0;
 255 }
 256
 257 /**
 258  * Return the link state of an IPD/PKO port as returned by
 259  * auto negotiation. The result of this function may not match
 260  * Octeon's link config if auto negotiation has changed since
 261  * the last call to cvmx_helper_link_set().
 262  *
 263  * @ipd_port: IPD/PKO port to query
 264  *
 265  * Returns Link state
 266  */
 267 cvmx_helper_link_info_t __cvmx_helper_rgmii_link_get(int ipd_port)
 268 {
 269         int interface = cvmx_helper_get_interface_num(ipd_port);
 270         int index = cvmx_helper_get_interface_index_num(ipd_port);
 271         union cvmx_asxx_prt_loop asxx_prt_loop;
 272
 273         asxx_prt_loop.u64 = cvmx_read_csr(CVMX_ASXX_PRT_LOOP(interface));
 274         if (asxx_prt_loop.s.int_loop & (1 << index)) {
 275                 /* Force 1Gbps full duplex on internal loopback */
 276                 cvmx_helper_link_info_t result;
 277                 result.u64 = 0;
 278                 result.s.full_duplex = 1;
 279                 result.s.link_up = 1;
 280                 result.s.speed = 1000;
 281                 return result;
 282         } else
 283                 return __cvmx_helper_board_link_get(ipd_port);
 284 }
 285
 286 /**
 287  * Configure an IPD/PKO port for the specified link state. This
 288  * function does not influence auto negotiation at the PHY level.
 289  * The passed link state must always match the link state returned
 290  * by cvmx_helper_link_get(). It is normally best to use
 291  * cvmx_helper_link_autoconf() instead.
 292  *
 293  * @ipd_port:  IPD/PKO port to configure
 294  * @link_info: The new link state
 295  *
 296  * Returns Zero on success, negative on failure
 297  */
 298 int __cvmx_helper_rgmii_link_set(int ipd_port,
 299                                  cvmx_helper_link_info_t link_info)
 300 {
 301         int result = 0;
 302         int interface = cvmx_helper_get_interface_num(ipd_port);
 303         int index = cvmx_helper_get_interface_index_num(ipd_port);
 304         union cvmx_gmxx_prtx_cfg original_gmx_cfg;
 305         union cvmx_gmxx_prtx_cfg new_gmx_cfg;
 306         union cvmx_pko_mem_queue_qos pko_mem_queue_qos;
 307         union cvmx_pko_mem_queue_qos pko_mem_queue_qos_save[16];
 308         union cvmx_gmxx_tx_ovr_bp gmx_tx_ovr_bp;
 309         union cvmx_gmxx_tx_ovr_bp gmx_tx_ovr_bp_save;
 310         int i;
 311
 312         /* Ignore speed sets in the simulator */
 313         if (cvmx_sysinfo_get()->board_type == CVMX_BOARD_TYPE_SIM)
 314                 return 0;
 315
 316         /* Read the current settings so we know the current enable state */
 317         original_gmx_cfg.u64 =
 318             cvmx_read_csr(CVMX_GMXX_PRTX_CFG(index, interface));
 319         new_gmx_cfg = original_gmx_cfg;
 320
 321         /* Disable the lowest level RX */
 322         cvmx_write_csr(CVMX_ASXX_RX_PRT_EN(interface),
 323                        cvmx_read_csr(CVMX_ASXX_RX_PRT_EN(interface)) &
 324                                      ~(1 << index));
 325
 326         memset(pko_mem_queue_qos_save, 0, sizeof(pko_mem_queue_qos_save));
 327         /* Disable all queues so that TX should become idle */
 328         for (i = 0; i < cvmx_pko_get_num_queues(ipd_port); i++) {
 329                 int queue = cvmx_pko_get_base_queue(ipd_port) + i;
 330                 cvmx_write_csr(CVMX_PKO_REG_READ_IDX, queue);
 331                 pko_mem_queue_qos.u64 = cvmx_read_csr(CVMX_PKO_MEM_QUEUE_QOS);
 332                 pko_mem_queue_qos.s.pid = ipd_port;
 333                 pko_mem_queue_qos.s.qid = queue;
 334                 pko_mem_queue_qos_save[i] = pko_mem_queue_qos;
 335                 pko_mem_queue_qos.s.qos_mask = 0;
 336                 cvmx_write_csr(CVMX_PKO_MEM_QUEUE_QOS, pko_mem_queue_qos.u64);
 337         }
 338
 339         /* Disable backpressure */
 340         gmx_tx_ovr_bp.u64 = cvmx_read_csr(CVMX_GMXX_TX_OVR_BP(interface));
 341         gmx_tx_ovr_bp_save = gmx_tx_ovr_bp;
 342         gmx_tx_ovr_bp.s.bp &= ~(1 << index);
 343         gmx_tx_ovr_bp.s.en |= 1 << index;
 344         cvmx_write_csr(CVMX_GMXX_TX_OVR_BP(interface), gmx_tx_ovr_bp.u64);
 345         cvmx_read_csr(CVMX_GMXX_TX_OVR_BP(interface));
 346
 347         /*
 348          * Poll the GMX state machine waiting for it to become
 349          * idle. Preferably we should only change speed when it is
 350          * idle. If it doesn't become idle we will still do the speed
 351          * change, but there is a slight chance that GMX will
 352          * lockup.
 353          */
 354         cvmx_write_csr(CVMX_NPI_DBG_SELECT,
 355                        interface * 0x800 + index * 0x100 + 0x880);
 356         CVMX_WAIT_FOR_FIELD64(CVMX_DBG_DATA, union cvmx_dbg_data, data & 7,
 357                         ==, 0, 10000);
 358         CVMX_WAIT_FOR_FIELD64(CVMX_DBG_DATA, union cvmx_dbg_data, data & 0xf,
 359                         ==, 0, 10000);
 360
 361         /* Disable the port before we make any changes */
 362         new_gmx_cfg.s.en = 0;
 363         cvmx_write_csr(CVMX_GMXX_PRTX_CFG(index, interface), new_gmx_cfg.u64);
 364         cvmx_read_csr(CVMX_GMXX_PRTX_CFG(index, interface));
 365
 366         /* Set full/half duplex */
 367         if (cvmx_octeon_is_pass1())
 368                 /* Half duplex is broken for 38XX Pass 1 */
 369                 new_gmx_cfg.s.duplex = 1;
 370         else if (!link_info.s.link_up)
 371                 /* Force full duplex on down links */
 372                 new_gmx_cfg.s.duplex = 1;
 373         else
 374                 new_gmx_cfg.s.duplex = link_info.s.full_duplex;
 375
 376         /* Set the link speed. Anything unknown is set to 1Gbps */
 377         if (link_info.s.speed == 10) {
 378                 new_gmx_cfg.s.slottime = 0;
 379                 new_gmx_cfg.s.speed = 0;
 380         } else if (link_info.s.speed == 100) {
 381                 new_gmx_cfg.s.slottime = 0;
 382                 new_gmx_cfg.s.speed = 0;
 383         } else {
 384                 new_gmx_cfg.s.slottime = 1;
 385                 new_gmx_cfg.s.speed = 1;
 386         }
 387
 388         /* Adjust the clocks */
 389         if (link_info.s.speed == 10) {
 390                 cvmx_write_csr(CVMX_GMXX_TXX_CLK(index, interface), 50);
 391                 cvmx_write_csr(CVMX_GMXX_TXX_SLOT(index, interface), 0x40);
 392                 cvmx_write_csr(CVMX_GMXX_TXX_BURST(index, interface), 0);
 393         } else if (link_info.s.speed == 100) {
 394                 cvmx_write_csr(CVMX_GMXX_TXX_CLK(index, interface), 5);
 395                 cvmx_write_csr(CVMX_GMXX_TXX_SLOT(index, interface), 0x40);
 396                 cvmx_write_csr(CVMX_GMXX_TXX_BURST(index, interface), 0);
 397         } else {
 398                 cvmx_write_csr(CVMX_GMXX_TXX_CLK(index, interface), 1);
 399                 cvmx_write_csr(CVMX_GMXX_TXX_SLOT(index, interface), 0x200);
 400                 cvmx_write_csr(CVMX_GMXX_TXX_BURST(index, interface), 0x2000);
 401         }
 402
 403         if (OCTEON_IS_MODEL(OCTEON_CN30XX) || OCTEON_IS_MODEL(OCTEON_CN50XX)) {
 404                 if ((link_info.s.speed == 10) || (link_info.s.speed == 100)) {
 405                         union cvmx_gmxx_inf_mode mode;
 406                         mode.u64 = cvmx_read_csr(CVMX_GMXX_INF_MODE(interface));
 407
 408         /*
 409          * Port  .en  .type  .p0mii  Configuration
 410          * ----  ---  -----  ------  -----------------------------------------
 411          *  X      0     X      X    All links are disabled.
 412          *  0      1     X      0    Port 0 is RGMII
 413          *  0      1     X      1    Port 0 is MII
 414          *  1      1     0      X    Ports 1 and 2 are configured as RGMII ports.
 415          *  1      1     1      X    Port 1: GMII/MII; Port 2: disabled. GMII or
 416          *                           MII port is selected by GMX_PRT1_CFG[SPEED].
 417          */
 418
 419                         /* In MII mode, CLK_CNT = 1. */
 420                         if (((index == 0) && (mode.s.p0mii == 1))
 421                             || ((index != 0) && (mode.s.type == 1))) {
 422                                 cvmx_write_csr(CVMX_GMXX_TXX_CLK
 423                                                (index, interface), 1);
 424                         }
 425                 }
 426         }
 427
 428         /* Do a read to make sure all setup stuff is complete */
 429         cvmx_read_csr(CVMX_GMXX_PRTX_CFG(index, interface));
 430
 431         /* Save the new GMX setting without enabling the port */
 432         cvmx_write_csr(CVMX_GMXX_PRTX_CFG(index, interface), new_gmx_cfg.u64);
 433
 434         /* Enable the lowest level RX */
 435         cvmx_write_csr(CVMX_ASXX_RX_PRT_EN(interface),
 436                        cvmx_read_csr(CVMX_ASXX_RX_PRT_EN(interface)) | (1 <<
 437                                                                         index));
 438
 439         /* Re-enable the TX path */
 440         for (i = 0; i < cvmx_pko_get_num_queues(ipd_port); i++) {
 441                 int queue = cvmx_pko_get_base_queue(ipd_port) + i;
 442                 cvmx_write_csr(CVMX_PKO_REG_READ_IDX, queue);
 443                 cvmx_write_csr(CVMX_PKO_MEM_QUEUE_QOS,
 444                                pko_mem_queue_qos_save[i].u64);
 445         }
 446
 447         /* Restore backpressure */
 448         cvmx_write_csr(CVMX_GMXX_TX_OVR_BP(interface), gmx_tx_ovr_bp_save.u64);
 449
 450         /* Restore the GMX enable state. Port config is complete */
 451         new_gmx_cfg.s.en = original_gmx_cfg.s.en;
 452         cvmx_write_csr(CVMX_GMXX_PRTX_CFG(index, interface), new_gmx_cfg.u64);
 453
 454         return result;
 455 }
 456
 457 /**
 458  * Configure a port for internal and/or external loopback. Internal loopback
 459  * causes packets sent by the port to be received by Octeon. External loopback
 460  * causes packets received from the wire to sent out again.
 461  *
 462  * @ipd_port: IPD/PKO port to loopback.
 463  * @enable_internal:
 464  *                 Non zero if you want internal loopback
 465  * @enable_external:
 466  *                 Non zero if you want external loopback
 467  *
 468  * Returns Zero on success, negative on failure.
 469  */
 470 int __cvmx_helper_rgmii_configure_loopback(int ipd_port, int enable_internal,
 471                                            int enable_external)
 472 {
 473         int interface = cvmx_helper_get_interface_num(ipd_port);
 474         int index = cvmx_helper_get_interface_index_num(ipd_port);
 475         int original_enable;
 476         union cvmx_gmxx_prtx_cfg gmx_cfg;
 477         union cvmx_asxx_prt_loop asxx_prt_loop;
 478
 479         /* Read the current enable state and save it */
 480         gmx_cfg.u64 = cvmx_read_csr(CVMX_GMXX_PRTX_CFG(index, interface));
 481         original_enable = gmx_cfg.s.en;
 482         /* Force port to be disabled */
 483         gmx_cfg.s.en = 0;
 484         if (enable_internal) {
 485                 /* Force speed if we're doing internal loopback */
 486                 gmx_cfg.s.duplex = 1;
 487                 gmx_cfg.s.slottime = 1;
 488                 gmx_cfg.s.speed = 1;
 489                 cvmx_write_csr(CVMX_GMXX_TXX_CLK(index, interface), 1);
 490                 cvmx_write_csr(CVMX_GMXX_TXX_SLOT(index, interface), 0x200);
 491                 cvmx_write_csr(CVMX_GMXX_TXX_BURST(index, interface), 0x2000);
 492         }
 493         cvmx_write_csr(CVMX_GMXX_PRTX_CFG(index, interface), gmx_cfg.u64);
 494
 495         /* Set the loopback bits */
 496         asxx_prt_loop.u64 = cvmx_read_csr(CVMX_ASXX_PRT_LOOP(interface));
 497         if (enable_internal)
 498                 asxx_prt_loop.s.int_loop |= 1 << index;
 499         else
 500                 asxx_prt_loop.s.int_loop &= ~(1 << index);
 501         if (enable_external)
 502                 asxx_prt_loop.s.ext_loop |= 1 << index;
 503         else
 504                 asxx_prt_loop.s.ext_loop &= ~(1 << index);
 505         cvmx_write_csr(CVMX_ASXX_PRT_LOOP(interface), asxx_prt_loop.u64);
 506
 507         /* Force enables in internal loopback */
 508         if (enable_internal) {
 509                 uint64_t tmp;
 510                 tmp = cvmx_read_csr(CVMX_ASXX_TX_PRT_EN(interface));
 511                 cvmx_write_csr(CVMX_ASXX_TX_PRT_EN(interface),
 512                                (1 << index) | tmp);
 513                 tmp = cvmx_read_csr(CVMX_ASXX_RX_PRT_EN(interface));
 514                 cvmx_write_csr(CVMX_ASXX_RX_PRT_EN(interface),
 515                                (1 << index) | tmp);
 516                 original_enable = 1;
 517         }
 518
 519         /* Restore the enable state */
 520         gmx_cfg.s.en = original_enable;
 521         cvmx_write_csr(CVMX_GMXX_PRTX_CFG(index, interface), gmx_cfg.u64);
 522         return 0;
 523 }