1 openvswitch (2.4.90-1) unstable; urgency=low
4 - Nothing yet! Try NEWS...
6 -- Open vSwitch team <dev@openvswitch.org> Wed, 17 Jun 2015 16:09:32 -0700
8 openvswitch (2.4.0-1) unstable; urgency=low
10 * New upstream version
11 - Flow table modifications are now atomic, meaning that each packet
12 now sees a coherent version of the OpenFlow pipeline. For
13 example, if a controller removes all flows with a single OpenFlow
14 "flow_mod", no packet sees an intermediate version of the OpenFlow
15 pipeline where only some of the flows have been deleted.
16 - Added support for SFQ, FQ_CoDel and CoDel qdiscs.
17 - Add bash command-line completion support for ovs-vsctl Please check
18 utilities/ovs-command-compgen.INSTALL.md for how to use.
19 - The MAC learning feature now includes per-port fairness to mitigate
21 - New support for a "conjunctive match" OpenFlow extension, which
22 allows constructing OpenFlow matches of the form "field1 in
23 {a,b,c...} AND field2 in {d,e,f...}" and generalizations. For details,
24 see documentation for the "conjunction" action in ovs-ofctl(8).
25 - Add bash command-line completion support for ovs-appctl/ovs-dpctl/
26 ovs-ofctl/ovsdb-tool commands. Please check
27 utilities/ovs-command-compgen.INSTALL.md for how to use.
28 - The "learn" action supports a new flag "delete_learned" that causes
29 the learned flows to be deleted when the flow with the "learn" action
31 - Basic support for the Geneve tunneling protocol. It is not yet
32 possible to generate or match options. This is planned for a future
33 release. The protocol is documented at
34 http://tools.ietf.org/html/draft-gross-geneve-00
35 - The OVS database now reports controller rate limiting statistics.
36 - sflow now exports information about LACP-based bonds, port names, and
37 OpenFlow port numbers, as well as datapath performance counters.
38 - ovs-dpctl functionality is now available for datapaths integrated
39 into ovs-vswitchd, via ovs-appctl. Some existing ovs-appctl
40 commands are now redundant and will be removed in a future
41 release. See ovs-vswitchd(8) for details.
43 * OpenFlow 1.4 bundles are now supported for flow mods and port
44 mods. For flow mods, both 'atomic' and 'ordered' bundle flags
45 are trivially supported, as all bundled messages are executed
46 in the order they were added and all flow table modifications
47 are now atomic to the datapath. Port mods may not appear in
48 atomic bundles, as port status modifications are not atomic.
49 * IPv6 flow label and neighbor discovery fields are now modifiable.
50 * OpenFlow 1.5 extended registers are now supported.
51 * The OpenFlow 1.5 actset_output field is now supported.
52 * OpenFlow 1.5 Copy-Field action is now supported.
53 * OpenFlow 1.5 masked Set-Field action is now supported.
54 * OpenFlow 1.3+ table features requests are now supported (read-only).
55 * Nicira extension "move" actions may now be included in action sets.
56 * "resubmit" actions may now be included in action sets. The resubmit
57 is executed last, and only if the action set has no "output" or "group"
59 * OpenFlow 1.4+ flow "importance" is now maintained in the flow table.
60 * A new Netronome extension to OpenFlow 1.5+ allows control over the
61 fields hashed for OpenFlow select groups. See "selection_method" and
62 related options in ovs-ofctl(8) for details.
63 - ovs-ofctl has a new '--bundle' option that makes the flow mod commands
64 ('add-flow', 'add-flows', 'mod-flows', 'del-flows', and 'replace-flows')
65 use an OpenFlow 1.4 bundle to operate the modifications as a single
66 atomic transaction. If any of the flow mods in a transaction fail, none
67 of them are executed. All flow mods in a bundle appear to datapath
68 lookups simultaneously.
69 - ovs-ofctl 'add-flow' and 'add-flows' commands now accept arbitrary flow
70 mods as an input by allowing the flow specification to start with an
71 explicit 'add', 'modify', 'modify_strict', 'delete', or 'delete_strict'
72 keyword. A missing keyword is treated as 'add', so this is fully
73 backwards compatible. With the new '--bundle' option all the flow mods
74 are executed as a single atomic transaction using an OpenFlow 1.4 bundle.
75 - ovs-pki: Changed message digest algorithm from MD5 to SHA-1 because
76 MD5 is no longer secure and some operating systems have started to disable
78 - ovsdb-server: New OVSDB protocol extension allows inequality tests on
79 "optional scalar" columns. See ovsdb-server(1) for details.
80 - ovs-vsctl now permits immutable columns in a new row to be modified in
81 the same transaction that creates the row.
82 - test-controller has been renamed ovs-testcontroller at request of users
83 who find it useful for testing basic OpenFlow setups. It is still not
84 a necessary or desirable part of most Open vSwitch deployments.
85 - Support for travis-ci.org based continuous integration builds has been
86 added. Build failures are reported to build@openvswitch.org. See INSTALL.md
87 file for additional details.
88 - Support for the Rapid Spanning Tree Protocol (IEEE 802.1D-2004).
89 The implementation has been tested successfully against the Ixia Automated
90 Network Validation Library (ANVL).
91 - Stats are no longer updated on fake bond interface.
92 - Keep active bond slave selection across OVS restart.
93 - A simple wrapper script, 'ovs-docker', to integrate OVS with Docker
94 containers. If and when there is a native integration of Open vSwitch
95 with Docker, the wrapper script will be retired.
96 - Added support for DPDK Tunneling. VXLAN, GRE, and Geneve are supported
97 protocols. This is generic tunneling mechanism for userspace datapath.
98 - Support for multicast snooping (IGMPv1, IGMPv2 and IGMPv3)
99 - Support for Linux kernels up to 4.0.x
100 - The documentation now use the term 'destination' to mean one of syslog,
101 console or file for vlog logging instead of the previously used term
103 - Support for VXLAN Group Policy extension
104 - Initial support for the IETF Auto-Attach SPBM draft standard. This
105 contains rudimentary support for the LLDP protocol as needed for
107 - The default OpenFlow and OVSDB ports are now the IANA-assigned
108 numbers. OpenFlow is 6653 and OVSDB is 6640.
109 - Support for DPDK vHost.
110 - Support for outer UDP checksums in Geneve and VXLAN.
111 - The kernel vports with dependencies are no longer part of the overall
112 openvswitch.ko but built and loaded automatically as individual kernel
113 modules (vport-*.ko).
114 - Support for STT tunneling.
115 - Support to configure method (--syslog-method argument) that determines
116 how daemons will talk with syslog.
117 - Support for "ovs-appctl vlog/list-pattern" command that lets to query
118 logging message format for each destination.
119 - GRE64 and ipsec_gre64 tunnel protocol is deprecated and will be removed
120 from OVS v2.5 release.
121 * The openvswitch-testcontroller package is new. It reintroduces the
122 simple OpenFlow controller that was packaged with Open vSwitch prior to
123 version 2.1, at request of users who find it useful for testing basic
124 OpenFlow setups. It is still not a necessary or desirable part of most
125 Open vSwitch deployments.
127 -- Open vSwitch team <dev@openvswitch.org> Thu, 20 Aug 2015 17:23:43 -0700
129 openvswitch (2.3.0-1) unstable; urgency=low
130 [ Open vSwitch team ]
131 * New upstream version
132 - OpenFlow 1.1, 1.2, and 1.3 are now enabled by default in
134 - Linux kernel datapath now has an exact match cache optimizing the
135 flow matching process.
136 - Datapath flows now have partially wildcarded tranport port field
137 matches. This reduces userspace upcalls, but increases the
138 number of different masks in the datapath. The kernel datapath
139 exact match cache removes the overhead of matching the incoming
140 packets with the larger number of masks, but when paired with an
141 older kernel module, some workloads may perform worse with the
144 -- Open vSwitch team <dev@openvswitch.org> Thu, 14 Aug 2014 11:03:32 -0700
146 openvswitch (2.2.0-1) unstable; urgency=low
147 [ Open vSwitch team ]
148 * New upstream version
149 - Internal ports are no longer brought up by default, because it
150 should be an administrator task to bring up devices as they are
152 - ovs-vsctl now reports when ovs-vswitchd fails to create a new port or
154 - The "ovsdbmonitor" graphical tool has been removed, because it was
155 poorly maintained and not widely used.
156 - New "check-ryu" Makefile target for running Ryu tests for OpenFlow
157 controllers against Open vSwitch. See INSTALL for details.
158 - Added IPFIX support for SCTP flows and templates for ICMPv4/v6 flows.
159 - Upon the receipt of a SIGHUP signal, ovs-vswitchd no longer reopens its
160 log file (it will terminate instead). Please use 'ovs-appctl vlog/reopen'
162 - Support for Linux kernels up to 3.14. From Kernel 3.12 onwards OVS uses
163 tunnel API for GRE and VXLAN.
164 - Added DPDK support.
165 - Added support for custom vlog patterns in Python
167 -- Open vSwitch team <dev@openvswitch.org> Wed, 19 Mar 2014 16:08:38 -0700
169 openvswitch (2.1.0-1) unstable; urgency=low
170 [ Open vSwitch team ]
171 * New upstream version
172 - Address prefix tracking support for flow tables. New columns
173 "prefixes" in OVS-DB table "Flow_Table" controls which packet
174 header fields are used for address prefix tracking. Prefix
175 tracking allows the classifier to skip rules with longer than
176 necessary prefixes, resulting in better wildcarding for datapath
177 flows. Default configuration is to not use any fields for prefix
178 tracking. However, if any flow tables contain both exact matches
179 and masked matches for IP address fields, OVS performance may be
180 increased by using this feature.
181 * As of now, the fields for which prefix lookup can be enabled
182 are: 'tun_id', 'tun_src', 'tun_dst', 'nw_src', 'nw_dst' (or
183 aliases 'ip_src' and 'ip_dst'), 'ipv6_src', and 'ipv6_dst'.
184 (Using this feature for 'tun_id' would only make sense if the
185 tunnel IDs have prefix structure similar to IP addresses.)
186 * There is a maximum number of fields that can be enabled for any
187 one flow table. Currently this limit is 3.
189 $ ovs-vsctl set Bridge br0 flow_tables:0=@N1 -- \
190 --id=@N1 create Flow_Table name=table0
191 $ ovs-vsctl set Bridge br0 flow_tables:1=@N1 -- \
192 --id=@N1 create Flow_Table name=table1
193 $ ovs-vsctl set Flow_Table table0 prefixes=ip_dst,ip_src
194 $ ovs-vsctl set Flow_Table table1 prefixes=[]
195 - TCP flags matching: OVS now supports matching of TCP flags. This
196 has an adverse performance impact when using OVS userspace 1.10
197 or older (no megaflows support) together with the new OVS kernel
198 module. It is recommended that the kernel and userspace modules
199 both are upgraded at the same time.
200 - The default OpenFlow and OVSDB ports will change to
201 IANA-assigned numbers in a future release. Consider updating
202 your installations to specify port numbers instead of using the
205 * The OpenFlow 1.1+ "Write-Actions" instruction is now supported.
206 * OVS limits the OpenFlow port numbers it assigns to port 32767 and
207 below, leaving port numbers above that range free for assignment
209 * ovs-vswitchd now honors changes to the "ofport_request" column
210 in the Interface table by changing the port's OpenFlow port
212 - ovs-vswitchd.conf.db.5 man page will contain graphviz/dot
213 diagram only if graphviz package was installed at the build time.
214 - Support for Linux kernels up to 3.11
216 The "show" command also displays mega flow mask stats.
218 * New command "ofp-parse-pcap" to dump OpenFlow from PCAP files.
219 - ovs-controller has been renamed test-controller. It is no longer
220 packaged or installed by default, because too many users assumed
221 incorrectly that ovs-controller was a necessary or desirable part
222 of an Open vSwitch deployment.
223 - Added vlog option to export to a UDP syslog sink.
225 * The "monitor" command can now monitor all tables in a database,
226 instead of being limited to a single table.
227 - The flow-eviction-threshold has been replaced by the flow-limit which is a
228 hard limit on the number of flows in the datapath. It defaults to 200,000
229 flows. OVS automatically adjusts this number depending on network
231 * The openvswitch-controller package has been removed, because too many
232 users assumed incorrectly that ovs-controller was a necessary or
233 desirable part of an Open vSwitch deployment.
235 -- Open vSwitch team <dev@openvswitch.org> Wed, 19 Mar 2014 16:08:38 -0700
237 openvswitch (2.0.0-1) unstable; urgency=low
238 [ Open vSwitch team ]
239 * New upstream version
240 - The ovs-vswitchd process is no longer single-threaded. Multiple
241 threads are now used to handle flow set up and asynchronous
244 * Experimental support for OpenFlow 1.1 (in addition to 1.2 and
245 1.3, which had experimental support in 1.10).
246 * New support for matching outer source and destination IP address
247 of tunneled packets, for tunnel ports configured with the newly
248 added "remote_ip=flow" and "local_ip=flow" options.
249 * Support for matching on metadata 'pkt_mark' for interacting with
250 other system components. On Linux this corresponds to the skb
252 * Support matching, rewriting SCTP ports
253 - The Interface table in the database has a new "ifindex" column to
254 report the interface's OS-assigned ifindex.
255 - New "check-oftest" Makefile target for running OFTest against Open
256 vSwitch. See README-OFTest for details.
257 - The flow eviction threshold has been moved to the Open_vSwitch table.
258 - Database names are now mandatory when specifying ovsdb-server options
259 through database paths (e.g. Private key option with the database name
260 should look like "--private-key=db:Open_vSwitch,SSL,private_key").
261 - Added ovs-dev.py, a utility script helpful for Open vSwitch developers.
262 - Support for Linux kernels up to 3.10
264 * New "ofp-parse" for printing OpenFlow messages read from a file.
265 - Added configurable flow caching support to IPFIX exporter.
266 - Dropped support for Linux pre-2.6.32.
267 - Log file timestamps and ovsdb commit timestamps are now reported
268 with millisecond resolution. (Previous versions only reported
271 -- Open vSwitch team <dev@openvswitch.org> Tue, 15 Oct 2013 15:03:42 -0700
273 openvswitch (1.11.0-1) unstable; urgency=low
274 [ Open vSwitch team ]
275 * New upstream version
276 - Support for megaflows, which allows wildcarding in the kernel (and
277 any dpif implementation that supports wildcards). Depending on
278 the flow table and switch configuration, flow set up rates are
279 close to the Linux bridge.
280 - The "tutorial" directory contains a new tutorial for some advanced
281 Open vSwitch features.
282 - Stable bond mode has been removed.
283 - The autopath action has been removed.
284 - New support for the data encapsulation format of the LISP tunnel
285 protocol (RFC 6830). An external control plane or manual flow
286 setup is required for EID-to-RLOC mapping.
288 * The "dec_mpls_ttl" and "set_mpls_ttl" actions from OpenFlow
289 1.1 and later are now implemented.
290 * New "stack" extension for use in actions, to push and pop from
292 * The "load" and "set_field" actions can now modify the "in_port". (This
293 allows one to enable output to a flow's input port by setting the
294 in_port to some unused value, such as OFPP_NONE.)
296 * New debugging commands "add-flow", "mod-flow", "del-flow".
297 - In dpif-based bridges, cache action translations, which can improve
298 flow set up performance by 80% with a complicated flow table.
299 - New syslog format, prefixed with "ovs|", to be easier to filter.
300 - RHEL: Removes the default firewall rule that allowed GRE traffic to
301 pass through. Any users that relied on this automatic firewall hole
302 will have to manually configure it. The ovs-ctl(8) manpage documents
303 the "enable-protocol" command that can be used as an alternative.
304 - New CFM demand mode which uses data traffic to indicate interface
307 -- Open vSwitch team <dev@openvswitch.org> Wed, 28 Aug 2013 14:31:44 -0700
309 openvswitch (1.10.0-1) unstable; urgency=low
310 [ Open vSwitch team ]
311 * New upstream version
312 - Bridge compatibility support has been removed. Any uses that
313 rely on ovs-brcompatd will have to stick with Open vSwitch 1.9.x
314 or adapt to native Open vSwitch support (e.g. use ovs-vsctl instead
316 - The maximum size of the MAC learning table is now configurable.
317 - With the Linux datapath, packets for new flows are now queued
318 separately on a per-port basis, so it should no longer be
319 possible for a large number of new flows arriving on one port to
320 prevent new flows from being processed on other ports.
321 - Many "ovs-vsctl" database commands now accept an --if-exists option.
322 Please refer to the ovs-vsctl manpage for details.
324 - Experimental support for newer versions of OpenFlow. See
325 the "What versions of OpenFlow does Open vSwitch support?"
326 question in the FAQ for more details.
327 - The OpenFlow "dp_desc" may now be configured by setting the
328 value of other-config:dp-desc in the Bridge table.
329 - It is possible to request the OpenFlow port number with the
330 "ofport_request" column in the Interface table.
332 - New support for the VXLAN tunnel protocol (see the IETF draft here:
333 http://tools.ietf.org/html/draft-mahalingam-dutt-dcops-vxlan-03).
334 - Tunneling requires the version of the kernel module paired with
335 Open vSwitch 1.9.0 or later.
336 - Inheritance of the Don't Fragment bit in IP tunnels (df_inherit)
337 is no longer supported.
338 - Path MTU discovery is no longer supported.
340 - The "dump-flows" and "del-flows" no longer require an argument
341 if only one datapath exists.
343 - New "vlog/disable-rate-limit" and "vlog/enable-rate-limit"
344 commands available allow control over logging rate limits.
345 - New "dpif/dump-dps", "dpif/show", and "dpif/dump-flows" command
346 that mimic the equivalent ovs-dpctl commands.
347 - The ofproto library is now responsible for assigning OpenFlow port
348 numbers. An ofproto implementation should assign them when
349 port_construct() is called.
350 - All dpif-based bridges of a particular type share a common
351 datapath called "ovs-<type>", e.g. "ovs-system". The ovs-dpctl
352 commands will now return information on that shared datapath. To
353 get the equivalent bridge-specific information, use the new
354 "ovs-appctl dpif/*" commands.
355 - Backward-incompatible changes:
356 - Earlier Open vSwitch versions treated ANY as a wildcard in flow
357 syntax. OpenFlow 1.1 adds a port named ANY, which introduces a
358 conflict. ANY was rarely used in flow syntax, so we chose to
359 retire that meaning of ANY in favor of the OpenFlow 1.1 meaning.
360 - Patch ports no longer require kernel support, so they now work
361 with FreeBSD and the kernel module built into Linux 3.3 and later.
363 -- Open vSwitch team <dev@openvswitch.org> Wed, 01 May 2013 14:28:21 -0700
365 openvswitch (1.9.0-1) unstable; urgency=low
366 [ Open vSwitch team ]
367 * New upstream version
369 - Support for ipv6 set action.
370 - SKB mark matching and setting.
371 - support for Linux kernels up to 3.8
372 - FreeBSD is now a supported platform, thanks to code contributions from
373 Gaetano Catalli, Ed Maste, and Giuseppe Lettieri.
374 - ovs-bugtool: New --ovs option to report only OVS related information.
375 - New %t and %T log escapes to identify the subprogram within a
376 cooperating group of processes or threads that emitted a log message.
377 The default log patterns now include this information.
379 - Allow bitwise masking for SHA and THA fields in ARP, SLL and TLL
380 fields in IPv6 neighbor discovery messages, and IPv6 flow label.
381 - Adds support for writing to the metadata field for a flow.
383 - The tunneling code no longer assumes input and output keys are
384 symmetric. If they are not, PMTUD needs to be disabled for
385 tunneling to work. Note this only applies to flow-based keys.
386 - New support for a nonstandard form of GRE that supports a 64-bit key.
387 - Tunnel Path MTU Discovery default value was set to 'disabled'.
388 This feature is deprecated and will be removed soon.
389 - Tunnel header caching removed.
391 - Commands and actions that accept port numbers now also accept keywords
392 that represent those ports (such as LOCAL, NONE, and ALL). This is
393 also the recommended way to specify these ports, for compatibility
394 with OpenFlow 1.1 and later (which use the OpenFlow 1.0 numbers
395 for these ports for different purposes).
397 - Support requesting the port number with the "port_no" option in
398 the "add-if" command.
399 - ovs-pki: The "online PKI" features have been removed, along with
400 the ovs-pki-cgi program that facilitated it, because of some
401 alarmist insecurity claims. We do not believe that these claims
402 are true, but because we do not know of any users for this
403 feature it seems better on balance to remove it. (The ovs-pki-cgi
404 program was not included in distribution packaging.)
405 - ovsdb-server now enforces the immutability of immutable columns. This
406 was not enforced in earlier versions due to an oversight.
407 - The following features are now deprecated. They will be removed no
408 earlier than February 2013. Please email dev@openvswitch.org with
410 - Bridge compatibility.
412 - The autopath action.
413 - Interface type "null".
414 - Numeric values for reserved ports (see "ovs-ofctl" note above).
415 - Tunnel Path MTU Discovery.
416 - CAPWAP tunnel support.
417 - The data in the RARP packets can now be matched in the same way as the
420 -- Open vSwitch team <dev@openvswitch.org> Tue, 26 Feb 2013 11:23:19 -0700
422 openvswitch (1.8.0-1) unstable; urgency=low
423 [ Open vSwitch team ]
424 * New upstream version
425 *** Internal only release ***
426 - New FAQ. Please send updates and additions!
427 - Authors of controllers, please read the new section titled "Action
428 Reproduction" in DESIGN, which describes an Open vSwitch change in
429 behavior in corner cases that may affect some controllers.
431 - A new test utility that can create L3 tunnel between two Open
432 vSwitches and detect connectivity issues.
434 - New --sort and --rsort options for "dump-flows" command.
435 - "mod-port" command can now control all OpenFlow config flags.
437 - Allow general bitwise masking for IPv4 and IPv6 addresses in
438 IPv4, IPv6, and ARP packets. (Previously, only CIDR masks
440 - Allow support for arbitrary Ethernet masks. (Previously, only
441 the multicast bit in the destination address could be individually
443 - New field OXM_OF_METADATA, to align with OpenFlow 1.1.
444 - The OFPST_QUEUE request now reports an error if a specified port or
445 queue does not exist, or for requests for a specific queue on all
446 ports, if the specified queue does not exist on any port. (Previous
447 versions generally reported an empty set of results.)
448 - New "flow monitor" feature to allow controllers to be notified of
449 flow table changes as they happen.
450 - Additional protocols are not mirrored and dropped when forward-bpdu is
451 false. For a full list, see the ovs-vswitchd.conf.db man page.
452 - Open vSwitch now sends RARP packets in situations where it previously
453 sent a custom protocol, making it consistent with behavior of QEMU and
455 - All Open vSwitch programs and log files now show timestamps in UTC,
456 instead the local timezone, by default.
458 -- Open vSwitch team <dev@openvswitch.org> Mon, 16 Jul 2012 16:44:52 +0900
460 openvswitch (1.7.0-1) unstable; urgency=low
461 [ Open vSwitch team ]
462 * New upstream version
463 - kernel modules are renamed. openvswitch_mod.ko is now
464 openvswitch.ko and brcompat_mod.ko is now brcompat.ko.
465 - Increased the number of NXM registers to 8.
466 - Added ability to configure dscp setting for manager and controller
467 connections. By default, these connections have a DSCP value of
468 Internetwork Control (0xc0).
469 - Added the granular link health statistics, 'cfm_health', to an
472 - Added support to mask nd_target for ICMPv6 neighbor discovery flows.
473 - Added support for OpenFlow 1.3 port description (OFPMP_PORT_DESC)
476 - Added the "dump-ports-desc" command to retrieve port
477 information using the new port description multipart messages.
479 - Added support for spawning ovs-test server from the client.
480 - Now ovs-test is able to automatically create test bridges and ports.
481 - "ovs-dpctl dump-flows" now prints observed TCP flags in TCP flows.
482 - Tripled flow setup performance.
483 - The "coverage/log" command previously available through ovs-appctl
484 has been replaced by "coverage/show". The new command replies with
485 coverage counter values, instead of logging them.
487 -- Open vSwitch team <dev@openvswitch.org> Mon, 30 Jul 2012 17:23:57 +0900
489 openvswitch (1.6.1-1) unstable; urgency=low
490 [ Open vSwitch team ]
491 * New upstream version
492 - Allow OFPP_CONTROLLER as the in_port for packet-out messages.
494 -- Open vSwitch team <dev@openvswitch.org> Mon, 25 Jun 2012 13:52:17 +0900
496 openvswitch (1.6.0-1) unstable; urgency=low
497 [ Open vSwitch team ]
498 * New upstream version
500 - LACP bonds no longer fall back to balance-slb when negotiations fail.
501 Instead they drop traffic.
502 - The default bond_mode changed from SLB to active-backup, to protect
503 unsuspecting users from the significant risks of SLB bonds (which are
504 documented in vswitchd/INTERNALS).
505 - Load balancing can be disabled by setting the bond-rebalance-interval
508 - Added support for bitwise matching on TCP and UDP ports.
509 See ovs-ofctl(8) for more information.
510 - NXM flow dumps now include times elapsed toward idle and hard
512 - Added an OpenFlow extension NXT_SET_ASYNC_CONFIG that allows
513 controllers more precise control over which OpenFlow messages they
514 receive asynchronously.
515 - New "fin_timeout" action.
516 - Added "fin_timeout" support to "learn" action.
517 - The default MAC learning timeout has been increased from 60 seconds
518 to 300 seconds. The MAC learning timeout is now configurable.
519 - When QoS settings for an interface do not configure a default queue
520 (queue 0), Open vSwitch now uses a default configuration for that
521 queue, instead of dropping all packets as in previous versions.
522 - Logging to console and file will have UTC timestamp as a default for all
523 the daemons. An example of the default format is 2012-01-27T16:35:17Z.
524 ovs-appctl can be used to change the default format as before.
525 - New support for limiting the number of flows in an OpenFlow flow
526 table, with configurable policy for evicting flows upon
527 overflow. See the Flow_Table table in ovs-vswitch.conf.db(5)
528 for more information.
529 - New "enable-async-messages" column in the Controller table. If set to
530 false, OpenFlow connections to the controller will initially have all
531 asynchronous messages disabled, overriding normal OpenFlow behavior.
532 - ofproto-provider interface:
533 - "struct rule" has a new member "used" that ofproto implementations
534 should maintain by updating with ofproto_rule_update_used().
536 - The new option --timestamp causes the "monitor" command to print
537 a timestamp with every update.
538 - CFM module CCM broadcasts can now be tagged with an 802.1p priority.
540 -- Open vSwitch team <dev@openvswitch.org> Fri, 24 Feb 2012 11:12:48 +0900
542 openvswitch (1.5.0-1) unstable; urgency=low
543 [ Open vSwitch team ]
544 * New upstream version
546 - Added support for querying, modifying, and deleting flows
547 based on flow cookie when using NXM.
548 - Added new NXM_PACKET_IN format.
550 - Added daemonization support to the monitor and snoop commands.
552 - The "find" command supports new set relational operators
553 {=}, {!=}, {<}, {>}, {<=}, and {>=}.
554 - ovsdb-tool now uses the typical database and schema installation
555 directories as defaults.
557 -- Open vSwitch team <dev@openvswitch.org> Fri, 01 June 2012 13:06:00 +0900
559 openvswitch (1.4.0+git20120426-1) unstable; urgency=low
561 * New upstream release fixing the following bugs:
562 o Broken log rotation.
563 o Use-after-free error when ports disappear.
564 o Minor memory leaks.
565 o Testsuite failures on big-endian architectures.
567 -- Ben Pfaff <pfaffben@debian.org> Thu, 26 Apr 2012 13:46:55 -0700
569 openvswitch (1.4.0+git20120321-1) unstable; urgency=low
571 * New upstream version including:
573 - ovs-vsctl: Allow "fake bridges" to be created for VLAN 0.
574 - vswitchd: Make the MAC entry aging time configurable.
575 - mac-learning: Increase MAC learning timeout to 300 seconds.
577 - netdev-linux: Fix use-after-free when netdev_dump_queues() deletes
579 - netlink-socket: Increase Netlink socket receive buffer size.
580 - ofproto: Fix code that keeps track of MTU.
581 - ovs-monitor-ipsec: Detect correctly IPSEC configuration changes
582 - bond: Incorrectly reported an error in appctl.
583 - socket-util: Unlink Unix domain sockets that bind but fail to connect.
584 - bridge: Remove unwanted ports at time of ofproto creation.
585 - dpif-linux: Make dpif_linux_port_query_by_name() query only one
587 - ofproto-dpif: Cleanup STP on ports when disabled on their bridge.
588 - configure: Try to extract kernel source directory from build Makefile.
589 - vswitchd: Always configure a default queue for QoS.
590 - ofproto-dpif: Don't output to in_port even if in_port is OFPP_LOCAL.
591 - sflow_agent: Use snprintf() in place of sprintf().
593 - Move PKI directory to FHS-compliant location. Closes: #661090.
594 Thanks to Andreas Beckmann <debian@abeckmann.de> for reporting
596 - Use a different way to avoid failing install without kernel module.
597 - Avoid unit test failure when doing "unofficial" builds.
598 - Bump standards-version to 3.9.3.
599 - Remove some useless files from the dkms package.
600 - Clean .pyc files in "clean" target.
601 - Remove po-debconf build dependency.
602 - Build-depend on python-all to pull in all Python versions.
603 - Add missing ${python:Depends} to openvswitch-test package.
604 - Improve long descriptions so as to better describe the packages.
605 - Bump debhelper compat level to 8 and make build-depends consistent.
606 - Fix exit status of openvswitch-switch init script "status" command.
607 - Use provided kernel source dir instead of host kernel version.
608 - Do not run "make" if "configure" fails during DKMS build.
609 - Look in /lib/modules instead of /usr/src for DKMS kernel sources.
610 - Fix dependencies for openvswitch-datapath-dkms package.
611 - Don't install Python modules for obsolete Python versions.
612 - Add dependency on ${misc:Depends} to openvswitch-test
613 o Documentation improvements:
614 - ovsdb-doc: Use minus sign in negative numbers in nroff output.
615 - ovsdb-doc: Convert '-' preceding a number as a minus sign, not a
617 - ovsdb-doc: Put NAME section into generated manpage.
618 - Fix typo in manpage.
619 - vswitchd: Document behavior of 802.1p priorities with VLAN splinters.
620 - netdev: Fix typo in error message.
621 - INSTALL.Linux: minor typo
623 * Many thanks to Thomas Goirand <zigo@debian.org> for contributing many
624 of the packaging fixes listed above.
626 * This version fixes most of the lintian errors described in bug
627 #663051, but a few remain, so this upload does not close that bug. I
628 believe that this upload should be suitable for downgrading that bug's
631 -- Ben Pfaff <pfaffben@debian.org> Wed, 21 Mar 2012 10:00:28 -0700
633 openvswitch (1.4.0-2+nmu1) unstable; urgency=low
635 * Non maintainer upload.
636 * Removes all patches in debian/patches, because they are patching stuff
637 inconditionally in debian/*, and this should be applied by default.
638 * Uses the correct ${kernel_source_dir} in debian/dkms.conf.in, so that
639 the kernel module builds as expected (Closes: #659685).
641 -- Thomas Goirand <zigo@debian.org> Thu, 08 Mar 2012 08:46:24 +0000
643 openvswitch (1.4.0-2) unstable; urgency=low
645 * Use explicit DKMS variable for kernel source directory
646 - 0001-debian-Fix-dependencies-for-openvswitch-datapath-dkm.patch
647 - 0002-debian-Look-in-lib-modules-instead-of-usr-src-for-DK.patch
648 - 0001-debian-Use-provided-kernel-source-dir.patch
649 - 0001-debian-Do-not-run-make-if-configure-fails-during-DKM.patch
651 * Don't install Python modules for obsolete Python versions
652 - 0001-debian-Don-t-install-Python-modules-for-obsolete-Pyt.patch
654 -- Simon Horman <horms@debian.org> Tue, 14 Feb 2012 11:43:13 +0900
656 openvswitch (1.4.0-1) unstable; urgency=low
657 [ Open vSwitch team ]
658 * New upstream version
659 - Compatible with Open vSwitch kernel module included in Linux 3.3.
660 - New "VLAN splinters" feature to work around buggy device drivers
661 in old Linux versions. (This feature is deprecated. When
662 broken device drivers are no longer in widespread use, we will
663 delete this feature.) See ovs-vswitchd.conf.db(5) for more
666 - Added ability to match on IPv6 flow label through NXM.
667 - Added ability to match on ECN bits in IPv4 and IPv6 through NXM.
668 - Added ability to match on TTL in IPv4 and IPv6 through NXM.
669 - Added ability to modify ECN bits in IPv4.
670 - Added ability to modify TTL in IPv4.
672 - Don't require the "normal" action to use mirrors. Traffic will
673 now be properly mirrored for any flows, regardless of their
675 - Track packet and byte statistics sent on mirrors.
677 - New "fdb/flush" command to flush bridge's MAC learning table.
679 - A new distributed testing tool that allows one to diagnose performance
680 and connectivity issues. This tool currently is not included in RH or
682 - RHEL packaging now supports integration with Red Hat network scripts.
683 - Debian: Depend on python (>= 2.7) | python-argparse instead of
684 python-argparse to avoid pulling in python2.6
687 -- Open vSwitch team <dev@openvswitch.org> Mon, 30 Jan 2012 23:36:00 +0000
689 openvswitch (1.3.0-1) unstable; urgency=low
690 [ Open vSwitch team ]
691 * New upstream version
693 - Added an OpenFlow extension which allows the "output" action to accept
695 - Added an OpenFlow extension for flexible learning.
696 - Bumped number of NXM registers from four to five.
698 - New "version" command to determine version of running daemon.
699 - If no argument is provided for "cfm/show", displays detailed
700 information about all interfaces with CFM enabled.
701 - If no argument is provided for "lacp/show", displays detailed
702 information about all ports with LACP enabled.
704 - The software switch now supports 255 OpenFlow tables, instead
705 of just one. By default, only table 0 is consulted, but the
706 new NXAST_RESUBMIT_TABLE action can look up in additional
707 tables. Tables 128 and above are reserved for use by the
708 switch itself; please use only tables 0 through 127.
709 - Add support for 802.1D spanning tree (STP).
710 - Fragment handling extensions:
711 - New OFPC_FRAG_NX_MATCH fragment handling mode, in which L4
712 fields are made available for matching in fragments with
714 - New NXM_NX_IP_FRAG match field for matching IP fragments (usable
715 via "ip_frag" in ovs-ofctl).
716 - New ovs-ofctl "get-frags" and "set-frags" commands to get and set
717 fragment handling policy.
718 - CAPWAP tunneling now supports an extension to transport a 64-key. By
719 default it remains compatible with the old version and other
720 standards-based implementations.
721 - Flow setups are now processed in a round-robin manner across ports
722 to prevent any single client from monopolizing the CPU and conducting
723 a denial of service attack.
724 - Added support for native VLAN tagging. A new "vlan_mode"
725 parameter can be set for "port". Possible values: "access",
726 "trunk", "native-tagged" and "native-untagged".
727 - test-openflowd has been removed. Please use ovs-vswitchd instead.
729 -- Open vSwitch team <dev@openvswitch.org> Mon, 09 Dec 2011 23:36:00 +0000
731 openvswitch (1.2.0-1) unstable; urgency=low
733 [ Open vSwitch team ]
734 * New upstream version
735 - New "ofproto" abstraction layer to ease porting to hardware
737 - Packaging for Red Hat Enterprise Linux 5.6 and 6.0.
738 - Datapath support for Linux kernels up to 3.0.
740 - New "bundle" and "bundle_load" action extensions.
742 - Implement table unique constraints.
743 - Support cooperative locking between callers.
745 - New "-s" option for "show" command prints packet and byte
746 counters for each port.
748 - New "--readd" option for "replace-flows".
750 - New "show" command to print an overview of configuration.
751 - New "comment" command to add remark that explains intentions.
752 - ovs-brcompatd has been rewritten to fix long-standing bugs.
753 - ovs-openflowd has been renamed test-openflowd and moved into the
754 tests directory. Its presence confused too many users. Please
755 use ovs-vswitchd instead.
756 - New ovs-benchmark utility to test flow setup performance.
757 - A new log level "off" has been added. Configuring a log facility
758 "off" prevents any messages from being logged to it. Previously,
759 "emer" was effectively "off" because no messages were ever logged at
760 level "emer". Now, errors that cause a process to exit are logged
762 - "configure" option --with-l26 has been renamed --with-linux, and
763 --with-l26-source has been renamed --with-linux-source. The old
764 names will be removed after the next release, so please update
766 - The "-2.6" suffix has been dropped from the datapath/linux-2.6 and
767 datapath/linux-2.6/compat-2.6 directories.
769 - Dropped support for "tun_id_from_cookie" OpenFlow extension.
770 Please use the extensible match extensions instead.
771 - Removed the Maintenance_Point and Monitor tables in an effort
772 to simplify 802.1ag configuration.
773 - Performance and scalability improvements
776 -- Open vSwitch team <dev@openvswitch.org> Wed, 03 Aug 2011 14:43:00 +0000
778 openvswitch (1.1.1-1) unstable; urgency=low
780 [ Open vSwitch team ]
784 * docs: Suppress warning marcro DD not defined
785 (upstream commit 58f870d0)
786 * debian: Make openvswitch depend on Python
787 (upstream commit aa41cb61)
788 * debian: Don't begin openvswitch-pki description with article.
789 (upstream commit bc6bb66)
790 * Debian: Add ${misc:Depends} dependency to python-openvswitch
791 * Debian: Update standards version from 3.9.1 to 3.9.2
792 * Debian: ${source:Version} dependency on python openvswitch
793 * Debian: ${source:Version} dependency for python openvswitch
794 * Switch to dpkg-source 3.0 (quilt) format
795 - For local non-debian/ patches (above)
797 -- Simon Horman <horms@debian.org> Wed, 15 Jun 2011 10:46:15 +0900
799 openvswitch (1.1.0-1) unstable; urgency=low
801 [ Open vSwitch team ]
802 * New upstream version
803 - Ability to define policies over IPv6
806 - Support for extensible match extensions to OpenFlow
808 - Support for HFSC qdisc.
809 - Queue used by in-band control can now be configured.
811 - Kernel<->userspace interface has been reworked and should be
812 close to a stable ABI now.
813 - "Port group" concept has been dropped.
814 - GRE over IPSEC tunnels
816 - New active backup bonding mode.
817 - New L4 hashing support when LACP is enabled.
818 - Source MAC hash now includes VLAN field also.
820 - Greatly improved handling of large flow tables
822 - "show" command now prints full vport configuration.
823 - "dump-groups" command removed since kernel support for
824 port groups was dropped.
826 - New commands for working with the new Managers table.
827 - "list" command enhanced with new formatting options and --columns
829 - "get" command now accepts new --id option.
830 - New "find" command.
832 - New "queue-stats" command for printing queue stats.
833 - New commands "replace-flows" and "diff-flows".
834 - Commands to add and remove flows can now read from files.
835 - New --flow-format option to enable or disable NXM.
836 - New --more option to increase OpenFlow message verbosity.
837 - Removed "tun-cookie" command, which is no longer useful.
838 - ovs-controller enhancements for testing various features.
839 - New ovs-vlan-test command for testing for Linux kernel driver VLAN
840 bugs. New ovs-vlan-bug-workaround command for enabling and
841 disabling a workaround for these driver bugs.
843 - "Resubmit" actions now update flow statistics.
844 - New "register" extension for use in matching and actions, via NXM.
845 - New "multipath" experimental action extension.
846 - New support for matching multicast Ethernet frames, via NXM.
847 - New extension for OpenFlow vendor error codes.
848 - New extension to set the QoS output queue without actually
849 sending to an output port.
850 - Open vSwitch now reports a single flow table, instead of
851 separate hash and wildcard tables. This better models the
852 current implementation.
853 - New experimental "note" action.
854 - New "ofproto/trace" ovs-appctl command and associated utilities
855 to ease debugging complex flow tables.
857 - Schema documentation now includes an entity-relationship diagram.
858 - The database is now garbage collected. In most tables,
859 unreferenced rows will be deleted automatically.
860 - Many tables now include statistics updated periodically by
861 ovs-vswitchd or ovsdb-server.
862 - Every table now has an "external-ids" column for use by OVS
864 - There is no default controller anymore. Each bridge must have its
865 controller individually specified.
866 - The "fail-mode" is now a property of a Bridge instead of a Controller.
867 - New versioning and checksum features.
868 - New Managers table and manager_options column in Open_vSwitch table
869 for specifying managers. The old "managers" column in the
870 Open_vSwitch table has been removed.
871 - Many "name" columns are now immutable.
873 - Dropped support for XenServer pre-5.6.100.
874 - Dropped support for Linux pre-2.6.18.
875 - Dropped controller discovery support.
876 - Dropped "ovs-ofctl status" and the OpenFlow extension that it used.
877 Statistics reporting in the database is a rough equivalent.
878 - Dropped the "corekeeper" package (now separate, at
879 http://openvswitch.org/cgi-bin/gitweb.cgi?p=corekeeper).
880 - Performance and scalability improvements
884 * Add the following fixes from upstream branch-1.1
885 - 7f1aca9 dpif-linux: Avoid logging error on ENOENT in
886 dpif_linux_is_internal_device().
887 - 8996f83 dpif-linux: Avoid segfault on netdev_get_stats() without kernel
889 - 002d4a3 vswitch: Improve schema documentation.
890 - 58bd294 cfm: Fix broken fault logic.
891 - c042664 bridge: Run once before configuring CFM.
892 * Switch to dpkg-source 3.0 (quilt) format
894 -- Simon Horman <horms@debian.org> Wed, 27 Apr 2011 17:11:10 +0900
896 openvswitch (1.1.0~pre2.g2.ea763e0e-1) unstable; urgency=low
898 * Git snapshot, including
899 - tests: Fix Y2011 bug in testsuite
902 -- Simon Horman <horms@debian.org> Wed, 12 Jan 2011 08:34:35 +0900
904 openvswitch (1.1.0~pre2.g1.bbe8d06e-1) unstable; urgency=low
908 -- Simon Horman <horms@debian.org> Thu, 06 Jan 2011 11:11:55 +0900
910 openvswitch (1.1.0~pre2-5) unstable; urgency=low
912 * Open vSwitch only works on Linux so set
913 the Architecture of binary packages to linux-any accordingly
915 -- Simon Horman <horms@debian.org> Tue, 23 Nov 2010 07:55:19 +0900
917 openvswitch (1.1.0~pre2-4) unstable; urgency=low
919 * Add procps to Build-Depends
922 -- Simon Horman <horms@debian.org> Tue, 16 Nov 2010 06:46:17 +0900
924 openvswitch (1.1.0~pre2-3) unstable; urgency=low
926 * Remove the corekeeper package as it isn't strongly related
927 to Open vSwitch. It has subsequently been broken off into
928 a separate source repository and may be uploaded as its
929 own debian source package.
930 http://openvswitch.org/cgi-bin/gitweb.cgi?p=corekeeper;a=summary
932 * Avoid the use of long socket names.
933 (closes: #602891, closes: #602911)
935 -- Simon Horman <horms@debian.org> Thu, 11 Nov 2010 06:35:05 +0900
937 openvswitch (1.1.0~pre2-2) unstable; urgency=low
939 * Clarify licensing of files in xenserver/
941 -- Simon Horman <horms@debian.org> Thu, 23 Sep 2010 10:56:18 +0900
943 openvswitch (1.1.0~pre2-1) unstable; urgency=low
945 * New upstream version
948 -- Simon Horman <horms@debian.org> Wed, 15 Sep 2010 18:28:59 +0900
950 openvswitch (1.1.0~pre1-1) unstable; urgency=low
952 * New upstream version
953 - OpenFlow 1.0 slicing (QoS) functionality
954 - Python bindings for configuration database (no write support)
955 - Performance and scalability improvements
958 -- Open vSwitch team <dev@openvswitch.org> Tue, 31 Aug 2010 23:20:00 +0000
960 openvswitch (1.0.1-1) unstable; urgency=low
962 * New upstream version.
964 -- Open vSwitch team <dev@openvswitch.org> Mon, 17 May 2010 10:36:00 +0000