1 openvswitch (1.7.2-1) unstable; urgency=low
6 -- Open vSwitch team <dev@openvswitch.org> Fri, 09 Nov 2012 12:26:13 +0900
8 openvswitch (1.7.1-1) unstable; urgency=low
10 * New upstream version
13 -- Open vSwitch team <dev@openvswitch.org> Mon, 13 Aug 2012 15:35:53 +0900
15 openvswitch (1.7.0-1) unstable; urgency=low
17 * New upstream version
18 - kernel modules are renamed. openvswitch_mod.ko is now
19 openvswitch.ko and brcompat_mod.ko is now brcompat.ko.
20 - Increased the number of NXM registers to 8.
21 - Added ability to configure dscp setting for manager and controller
22 connections. By default, these connections have a DSCP value of
23 Internetwork Control (0xc0).
24 - Added the granular link health statistics, 'cfm_health', to an
27 - Added support to mask nd_target for ICMPv6 neighbor discovery flows.
28 - Added support for OpenFlow 1.3 port description (OFPMP_PORT_DESC)
31 - Added the "dump-ports-desc" command to retrieve port
32 information using the new port description multipart messages.
34 - Added support for spawning ovs-test server from the client.
35 - Now ovs-test is able to automatically create test bridges and ports.
36 - "ovs-dpctl dump-flows" now prints observed TCP flags in TCP flows.
37 - Tripled flow setup performance.
38 - The "coverage/log" command previously available through ovs-appctl
39 has been replaced by "coverage/show". The new command replies with
40 coverage counter values, instead of logging them.
42 -- Open vSwitch team <dev@openvswitch.org> Mon, 30 Jul 2012 17:23:57 +0900
44 openvswitch (1.6.1-1) unstable; urgency=low
46 * New upstream version
47 - Allow OFPP_CONTROLLER as the in_port for packet-out messages.
49 -- Open vSwitch team <dev@openvswitch.org> Mon, 25 Jun 2012 13:52:17 +0900
51 openvswitch (1.6.0-1) unstable; urgency=low
53 * New upstream version
55 - LACP bonds no longer fall back to balance-slb when negotiations fail.
56 Instead they drop traffic.
57 - The default bond_mode changed from SLB to active-backup, to protect
58 unsuspecting users from the significant risks of SLB bonds (which are
59 documented in vswitchd/INTERNALS).
60 - Load balancing can be disabled by setting the bond-rebalance-interval
63 - Added support for bitwise matching on TCP and UDP ports.
64 See ovs-ofctl(8) for more information.
65 - NXM flow dumps now include times elapsed toward idle and hard
67 - Added an OpenFlow extension NXT_SET_ASYNC_CONFIG that allows
68 controllers more precise control over which OpenFlow messages they
69 receive asynchronously.
70 - New "fin_timeout" action.
71 - Added "fin_timeout" support to "learn" action.
72 - The default MAC learning timeout has been increased from 60 seconds
73 to 300 seconds. The MAC learning timeout is now configurable.
74 - When QoS settings for an interface do not configure a default queue
75 (queue 0), Open vSwitch now uses a default configuration for that
76 queue, instead of dropping all packets as in previous versions.
77 - Logging to console and file will have UTC timestamp as a default for all
78 the daemons. An example of the default format is 2012-01-27T16:35:17Z.
79 ovs-appctl can be used to change the default format as before.
80 - New support for limiting the number of flows in an OpenFlow flow
81 table, with configurable policy for evicting flows upon
82 overflow. See the Flow_Table table in ovs-vswitch.conf.db(5)
84 - New "enable-async-messages" column in the Controller table. If set to
85 false, OpenFlow connections to the controller will initially have all
86 asynchronous messages disabled, overriding normal OpenFlow behavior.
87 - ofproto-provider interface:
88 - "struct rule" has a new member "used" that ofproto implementations
89 should maintain by updating with ofproto_rule_update_used().
91 - The new option --timestamp causes the "monitor" command to print
92 a timestamp with every update.
93 - CFM module CCM broadcasts can now be tagged with an 802.1p priority.
95 -- Open vSwitch team <dev@openvswitch.org> Fri, 24 Feb 2012 11:12:48 +0900
97 openvswitch (1.5.0-1) unstable; urgency=low
99 * New upstream version
101 - Added support for querying, modifying, and deleting flows
102 based on flow cookie when using NXM.
103 - Added new NXM_PACKET_IN format.
105 - Added daemonization support to the monitor and snoop commands.
107 - The "find" command supports new set relational operators
108 {=}, {!=}, {<}, {>}, {<=}, and {>=}.
109 - ovsdb-tool now uses the typical database and schema installation
110 directories as defaults.
112 -- Open vSwitch team <dev@openvswitch.org> Fri, 01 June 2012 13:06:00 +0900
114 openvswitch (1.4.0+git20120426-1) unstable; urgency=low
116 * New upstream release fixing the following bugs:
117 o Broken log rotation.
118 o Use-after-free error when ports disappear.
119 o Minor memory leaks.
120 o Testsuite failures on big-endian architectures.
122 -- Ben Pfaff <pfaffben@debian.org> Thu, 26 Apr 2012 13:46:55 -0700
124 openvswitch (1.4.0+git20120321-1) unstable; urgency=low
126 * New upstream version including:
128 - ovs-vsctl: Allow "fake bridges" to be created for VLAN 0.
129 - vswitchd: Make the MAC entry aging time configurable.
130 - mac-learning: Increase MAC learning timeout to 300 seconds.
132 - netdev-linux: Fix use-after-free when netdev_dump_queues() deletes
134 - netlink-socket: Increase Netlink socket receive buffer size.
135 - ofproto: Fix code that keeps track of MTU.
136 - ovs-monitor-ipsec: Detect correctly IPSEC configuration changes
137 - bond: Incorrectly reported an error in appctl.
138 - socket-util: Unlink Unix domain sockets that bind but fail to connect.
139 - bridge: Remove unwanted ports at time of ofproto creation.
140 - dpif-linux: Make dpif_linux_port_query_by_name() query only one
142 - ofproto-dpif: Cleanup STP on ports when disabled on their bridge.
143 - configure: Try to extract kernel source directory from build Makefile.
144 - vswitchd: Always configure a default queue for QoS.
145 - ofproto-dpif: Don't output to in_port even if in_port is OFPP_LOCAL.
146 - sflow_agent: Use snprintf() in place of sprintf().
148 - Move PKI directory to FHS-compliant location. Closes: #661090.
149 Thanks to Andreas Beckmann <debian@abeckmann.de> for reporting
151 - Use a different way to avoid failing install without kernel module.
152 - Avoid unit test failure when doing "unofficial" builds.
153 - Bump standards-version to 3.9.3.
154 - Remove some useless files from the dkms package.
155 - Clean .pyc files in "clean" target.
156 - Remove po-debconf build dependency.
157 - Build-depend on python-all to pull in all Python versions.
158 - Add missing ${python:Depends} to openvswitch-test package.
159 - Improve long descriptions so as to better describe the packages.
160 - Bump debhelper compat level to 8 and make build-depends consistent.
161 - Fix exit status of openvswitch-switch init script "status" command.
162 - Use provided kernel source dir instead of host kernel version.
163 - Do not run "make" if "configure" fails during DKMS build.
164 - Look in /lib/modules instead of /usr/src for DKMS kernel sources.
165 - Fix dependencies for openvswitch-datapath-dkms package.
166 - Don't install Python modules for obsolete Python versions.
167 - Add dependency on ${misc:Depends} to openvswitch-test
168 o Documentation improvements:
169 - ovsdb-doc: Use minus sign in negative numbers in nroff output.
170 - ovsdb-doc: Convert '-' preceding a number as a minus sign, not a
172 - ovsdb-doc: Put NAME section into generated manpage.
173 - Fix typo in manpage.
174 - vswitchd: Document behavior of 802.1p priorities with VLAN splinters.
175 - netdev: Fix typo in error message.
176 - INSTALL.Linux: minor typo
178 * Many thanks to Thomas Goirand <zigo@debian.org> for contributing many
179 of the packaging fixes listed above.
181 * This version fixes most of the lintian errors described in bug
182 #663051, but a few remain, so this upload does not close that bug. I
183 believe that this upload should be suitable for downgrading that bug's
186 -- Ben Pfaff <pfaffben@debian.org> Wed, 21 Mar 2012 10:00:28 -0700
188 openvswitch (1.4.0-2+nmu1) unstable; urgency=low
190 * Non maintainer upload.
191 * Removes all patches in debian/patches, because they are patching stuff
192 inconditionally in debian/*, and this should be applied by default.
193 * Uses the correct ${kernel_source_dir} in debian/dkms.conf.in, so that
194 the kernel module builds as expected (Closes: #659685).
196 -- Thomas Goirand <zigo@debian.org> Thu, 08 Mar 2012 08:46:24 +0000
198 openvswitch (1.4.0-2) unstable; urgency=low
200 * Use explicit DKMS variable for kernel source directory
201 - 0001-debian-Fix-dependencies-for-openvswitch-datapath-dkm.patch
202 - 0002-debian-Look-in-lib-modules-instead-of-usr-src-for-DK.patch
203 - 0001-debian-Use-provided-kernel-source-dir.patch
204 - 0001-debian-Do-not-run-make-if-configure-fails-during-DKM.patch
206 * Don't install Python modules for obsolete Python versions
207 - 0001-debian-Don-t-install-Python-modules-for-obsolete-Pyt.patch
209 -- Simon Horman <horms@debian.org> Tue, 14 Feb 2012 11:43:13 +0900
211 openvswitch (1.4.0-1) unstable; urgency=low
212 [ Open vSwitch team ]
213 * New upstream version
214 - Compatible with Open vSwitch kernel module included in Linux 3.3.
215 - New "VLAN splinters" feature to work around buggy device drivers
216 in old Linux versions. (This feature is deprecated. When
217 broken device drivers are no longer in widespread use, we will
218 delete this feature.) See ovs-vswitchd.conf.db(5) for more
221 - Added ability to match on IPv6 flow label through NXM.
222 - Added ability to match on ECN bits in IPv4 and IPv6 through NXM.
223 - Added ability to match on TTL in IPv4 and IPv6 through NXM.
224 - Added ability to modify ECN bits in IPv4.
225 - Added ability to modify TTL in IPv4.
227 - Don't require the "normal" action to use mirrors. Traffic will
228 now be properly mirrored for any flows, regardless of their
230 - Track packet and byte statistics sent on mirrors.
232 - New "fdb/flush" command to flush bridge's MAC learning table.
234 - A new distributed testing tool that allows one to diagnose performance
235 and connectivity issues. This tool currently is not included in RH or
237 - RHEL packaging now supports integration with Red Hat network scripts.
238 - Debian: Depend on python (>= 2.7) | python-argparse instead of
239 python-argparse to avoid pulling in python2.6
242 -- Open vSwitch team <dev@openvswitch.org> Mon, 30 Jan 2012 23:36:00 +0000
244 openvswitch (1.3.0-1) unstable; urgency=low
245 [ Open vSwitch team ]
246 * New upstream version
248 - Added an OpenFlow extension which allows the "output" action to accept
250 - Added an OpenFlow extension for flexible learning.
251 - Bumped number of NXM registers from four to five.
253 - New "version" command to determine version of running daemon.
254 - If no argument is provided for "cfm/show", displays detailed
255 information about all interfaces with CFM enabled.
256 - If no argument is provided for "lacp/show", displays detailed
257 information about all ports with LACP enabled.
259 - The software switch now supports 255 OpenFlow tables, instead
260 of just one. By default, only table 0 is consulted, but the
261 new NXAST_RESUBMIT_TABLE action can look up in additional
262 tables. Tables 128 and above are reserved for use by the
263 switch itself; please use only tables 0 through 127.
264 - Add support for 802.1D spanning tree (STP).
265 - Fragment handling extensions:
266 - New OFPC_FRAG_NX_MATCH fragment handling mode, in which L4
267 fields are made available for matching in fragments with
269 - New NXM_NX_IP_FRAG match field for matching IP fragments (usable
270 via "ip_frag" in ovs-ofctl).
271 - New ovs-ofctl "get-frags" and "set-frags" commands to get and set
272 fragment handling policy.
273 - CAPWAP tunneling now supports an extension to transport a 64-key. By
274 default it remains compatible with the old version and other
275 standards-based implementations.
276 - Flow setups are now processed in a round-robin manner across ports
277 to prevent any single client from monopolizing the CPU and conducting
278 a denial of service attack.
279 - Added support for native VLAN tagging. A new "vlan_mode"
280 parameter can be set for "port". Possible values: "access",
281 "trunk", "native-tagged" and "native-untagged".
282 - test-openflowd has been removed. Please use ovs-vswitchd instead.
284 -- Open vSwitch team <dev@openvswitch.org> Mon, 09 Dec 2011 23:36:00 +0000
286 openvswitch (1.2.0-1) unstable; urgency=low
288 [ Open vSwitch team ]
289 * New upstream version
290 - New "ofproto" abstraction layer to ease porting to hardware
292 - Packaging for Red Hat Enterprise Linux 5.6 and 6.0.
293 - Datapath support for Linux kernels up to 3.0.
295 - New "bundle" and "bundle_load" action extensions.
297 - Implement table unique constraints.
298 - Support cooperative locking between callers.
300 - New "-s" option for "show" command prints packet and byte
301 counters for each port.
303 - New "--readd" option for "replace-flows".
305 - New "show" command to print an overview of configuration.
306 - New "comment" command to add remark that explains intentions.
307 - ovs-brcompatd has been rewritten to fix long-standing bugs.
308 - ovs-openflowd has been renamed test-openflowd and moved into the
309 tests directory. Its presence confused too many users. Please
310 use ovs-vswitchd instead.
311 - New ovs-benchmark utility to test flow setup performance.
312 - A new log level "off" has been added. Configuring a log facility
313 "off" prevents any messages from being logged to it. Previously,
314 "emer" was effectively "off" because no messages were ever logged at
315 level "emer". Now, errors that cause a process to exit are logged
317 - "configure" option --with-l26 has been renamed --with-linux, and
318 --with-l26-source has been renamed --with-linux-source. The old
319 names will be removed after the next release, so please update
321 - The "-2.6" suffix has been dropped from the datapath/linux-2.6 and
322 datapath/linux-2.6/compat-2.6 directories.
324 - Dropped support for "tun_id_from_cookie" OpenFlow extension.
325 Please use the extensible match extensions instead.
326 - Removed the Maintenance_Point and Monitor tables in an effort
327 to simplify 802.1ag configuration.
328 - Performance and scalability improvements
331 -- Open vSwitch team <dev@openvswitch.org> Wed, 03 Aug 2011 14:43:00 +0000
333 openvswitch (1.1.1-1) unstable; urgency=low
335 [ Open vSwitch team ]
339 * docs: Suppress warning marcro DD not defined
340 (upstream commit 58f870d0)
341 * debian: Make openvswitch depend on Python
342 (upstream commit aa41cb61)
343 * debian: Don't begin openvswitch-pki description with article.
344 (upstream commit bc6bb66)
345 * Debian: Add ${misc:Depends} dependency to python-openvswitch
346 * Debian: Update standards version from 3.9.1 to 3.9.2
347 * Debian: ${source:Version} dependency on python openvswitch
348 * Debian: ${source:Version} dependency for python openvswitch
349 * Switch to dpkg-source 3.0 (quilt) format
350 - For local non-debian/ patches (above)
352 -- Simon Horman <horms@debian.org> Wed, 15 Jun 2011 10:46:15 +0900
354 openvswitch (1.1.0-1) unstable; urgency=low
356 [ Open vSwitch team ]
357 * New upstream version
358 - Ability to define policies over IPv6
361 - Support for extensible match extensions to OpenFlow
363 - Support for HFSC qdisc.
364 - Queue used by in-band control can now be configured.
366 - Kernel<->userspace interface has been reworked and should be
367 close to a stable ABI now.
368 - "Port group" concept has been dropped.
369 - GRE over IPSEC tunnels
371 - New active backup bonding mode.
372 - New L4 hashing support when LACP is enabled.
373 - Source MAC hash now includes VLAN field also.
375 - Greatly improved handling of large flow tables
377 - "show" command now prints full vport configuration.
378 - "dump-groups" command removed since kernel support for
379 port groups was dropped.
381 - New commands for working with the new Managers table.
382 - "list" command enhanced with new formatting options and --columns
384 - "get" command now accepts new --id option.
385 - New "find" command.
387 - New "queue-stats" command for printing queue stats.
388 - New commands "replace-flows" and "diff-flows".
389 - Commands to add and remove flows can now read from files.
390 - New --flow-format option to enable or disable NXM.
391 - New --more option to increase OpenFlow message verbosity.
392 - Removed "tun-cookie" command, which is no longer useful.
393 - ovs-controller enhancements for testing various features.
394 - New ovs-vlan-test command for testing for Linux kernel driver VLAN
395 bugs. New ovs-vlan-bug-workaround command for enabling and
396 disabling a workaround for these driver bugs.
398 - "Resubmit" actions now update flow statistics.
399 - New "register" extension for use in matching and actions, via NXM.
400 - New "multipath" experimental action extension.
401 - New support for matching multicast Ethernet frames, via NXM.
402 - New extension for OpenFlow vendor error codes.
403 - New extension to set the QoS output queue without actually
404 sending to an output port.
405 - Open vSwitch now reports a single flow table, instead of
406 separate hash and wildcard tables. This better models the
407 current implementation.
408 - New experimental "note" action.
409 - New "ofproto/trace" ovs-appctl command and associated utilities
410 to ease debugging complex flow tables.
412 - Schema documentation now includes an entity-relationship diagram.
413 - The database is now garbage collected. In most tables,
414 unreferenced rows will be deleted automatically.
415 - Many tables now include statistics updated periodically by
416 ovs-vswitchd or ovsdb-server.
417 - Every table now has an "external-ids" column for use by OVS
419 - There is no default controller anymore. Each bridge must have its
420 controller individually specified.
421 - The "fail-mode" is now a property of a Bridge instead of a Controller.
422 - New versioning and checksum features.
423 - New Managers table and manager_options column in Open_vSwitch table
424 for specifying managers. The old "managers" column in the
425 Open_vSwitch table has been removed.
426 - Many "name" columns are now immutable.
428 - Dropped support for XenServer pre-5.6.100.
429 - Dropped support for Linux pre-2.6.18.
430 - Dropped controller discovery support.
431 - Dropped "ovs-ofctl status" and the OpenFlow extension that it used.
432 Statistics reporting in the database is a rough equivalent.
433 - Dropped the "corekeeper" package (now separate, at
434 http://openvswitch.org/cgi-bin/gitweb.cgi?p=corekeeper).
435 - Performance and scalability improvements
439 * Add the following fixes from upstream branch-1.1
440 - 7f1aca9 dpif-linux: Avoid logging error on ENOENT in
441 dpif_linux_is_internal_device().
442 - 8996f83 dpif-linux: Avoid segfault on netdev_get_stats() without kernel
444 - 002d4a3 vswitch: Improve schema documentation.
445 - 58bd294 cfm: Fix broken fault logic.
446 - c042664 bridge: Run once before configuring CFM.
447 * Switch to dpkg-source 3.0 (quilt) format
449 -- Simon Horman <horms@debian.org> Wed, 27 Apr 2011 17:11:10 +0900
451 openvswitch (1.1.0~pre2.g2.ea763e0e-1) unstable; urgency=low
453 * Git snapshot, including
454 - tests: Fix Y2011 bug in testsuite
457 -- Simon Horman <horms@debian.org> Wed, 12 Jan 2011 08:34:35 +0900
459 openvswitch (1.1.0~pre2.g1.bbe8d06e-1) unstable; urgency=low
463 -- Simon Horman <horms@debian.org> Thu, 06 Jan 2011 11:11:55 +0900
465 openvswitch (1.1.0~pre2-5) unstable; urgency=low
467 * Open vSwitch only works on Linux so set
468 the Architecture of binary packages to linux-any accordingly
470 -- Simon Horman <horms@debian.org> Tue, 23 Nov 2010 07:55:19 +0900
472 openvswitch (1.1.0~pre2-4) unstable; urgency=low
474 * Add procps to Build-Depends
477 -- Simon Horman <horms@debian.org> Tue, 16 Nov 2010 06:46:17 +0900
479 openvswitch (1.1.0~pre2-3) unstable; urgency=low
481 * Remove the corekeeper package as it isn't strongly related
482 to Open vSwitch. It has subsequently been broken off into
483 a separate source repository and may be uploaded as its
484 own debian source package.
485 http://openvswitch.org/cgi-bin/gitweb.cgi?p=corekeeper;a=summary
487 * Avoid the use of long socket names.
488 (closes: #602891, closes: #602911)
490 -- Simon Horman <horms@debian.org> Thu, 11 Nov 2010 06:35:05 +0900
492 openvswitch (1.1.0~pre2-2) unstable; urgency=low
494 * Clarify licensing of files in xenserver/
496 -- Simon Horman <horms@debian.org> Thu, 23 Sep 2010 10:56:18 +0900
498 openvswitch (1.1.0~pre2-1) unstable; urgency=low
500 * New upstream version
503 -- Simon Horman <horms@debian.org> Wed, 15 Sep 2010 18:28:59 +0900
505 openvswitch (1.1.0~pre1-1) unstable; urgency=low
507 * New upstream version
508 - OpenFlow 1.0 slicing (QoS) functionality
509 - Python bindings for configuration database (no write support)
510 - Performance and scalability improvements
513 -- Open vSwitch team <dev@openvswitch.org> Tue, 31 Aug 2010 23:20:00 +0000
515 openvswitch (1.0.1-1) unstable; urgency=low
517 * New upstream version.
519 -- Open vSwitch team <dev@openvswitch.org> Mon, 17 May 2010 10:36:00 +0000