dmaengine: qcom_hidma: add error reporting for tx_status
[cascardo/linux.git] / drivers / dma / qcom / hidma_ll.c
1 /*
2  * Qualcomm Technologies HIDMA DMA engine low level code
3  *
4  * Copyright (c) 2015-2016, The Linux Foundation. All rights reserved.
5  *
6  * This program is free software; you can redistribute it and/or modify
7  * it under the terms of the GNU General Public License version 2 and
8  * only version 2 as published by the Free Software Foundation.
9  *
10  * This program is distributed in the hope that it will be useful,
11  * but WITHOUT ANY WARRANTY; without even the implied warranty of
12  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
13  * GNU General Public License for more details.
14  */
15
16 #include <linux/dmaengine.h>
17 #include <linux/slab.h>
18 #include <linux/interrupt.h>
19 #include <linux/mm.h>
20 #include <linux/highmem.h>
21 #include <linux/dma-mapping.h>
22 #include <linux/delay.h>
23 #include <linux/atomic.h>
24 #include <linux/iopoll.h>
25 #include <linux/kfifo.h>
26 #include <linux/bitops.h>
27
28 #include "hidma.h"
29
30 #define HIDMA_EVRE_SIZE                 16      /* each EVRE is 16 bytes */
31
32 #define HIDMA_TRCA_CTRLSTS_REG                  0x000
33 #define HIDMA_TRCA_RING_LOW_REG         0x008
34 #define HIDMA_TRCA_RING_HIGH_REG                0x00C
35 #define HIDMA_TRCA_RING_LEN_REG         0x010
36 #define HIDMA_TRCA_DOORBELL_REG         0x400
37
38 #define HIDMA_EVCA_CTRLSTS_REG                  0x000
39 #define HIDMA_EVCA_INTCTRL_REG                  0x004
40 #define HIDMA_EVCA_RING_LOW_REG         0x008
41 #define HIDMA_EVCA_RING_HIGH_REG                0x00C
42 #define HIDMA_EVCA_RING_LEN_REG         0x010
43 #define HIDMA_EVCA_WRITE_PTR_REG                0x020
44 #define HIDMA_EVCA_DOORBELL_REG         0x400
45
46 #define HIDMA_EVCA_IRQ_STAT_REG         0x100
47 #define HIDMA_EVCA_IRQ_CLR_REG                  0x108
48 #define HIDMA_EVCA_IRQ_EN_REG                   0x110
49
50 #define HIDMA_EVRE_CFG_IDX                      0
51
52 #define HIDMA_EVRE_ERRINFO_BIT_POS              24
53 #define HIDMA_EVRE_CODE_BIT_POS         28
54
55 #define HIDMA_EVRE_ERRINFO_MASK         GENMASK(3, 0)
56 #define HIDMA_EVRE_CODE_MASK                    GENMASK(3, 0)
57
58 #define HIDMA_CH_CONTROL_MASK                   GENMASK(7, 0)
59 #define HIDMA_CH_STATE_MASK                     GENMASK(7, 0)
60 #define HIDMA_CH_STATE_BIT_POS                  0x8
61
62 #define HIDMA_IRQ_EV_CH_EOB_IRQ_BIT_POS 0
63 #define HIDMA_IRQ_EV_CH_WR_RESP_BIT_POS 1
64 #define HIDMA_IRQ_TR_CH_TRE_RD_RSP_ER_BIT_POS   9
65 #define HIDMA_IRQ_TR_CH_DATA_RD_ER_BIT_POS      10
66 #define HIDMA_IRQ_TR_CH_DATA_WR_ER_BIT_POS      11
67 #define HIDMA_IRQ_TR_CH_INVALID_TRE_BIT_POS     14
68
69 #define ENABLE_IRQS (BIT(HIDMA_IRQ_EV_CH_EOB_IRQ_BIT_POS)       | \
70                      BIT(HIDMA_IRQ_EV_CH_WR_RESP_BIT_POS)       | \
71                      BIT(HIDMA_IRQ_TR_CH_TRE_RD_RSP_ER_BIT_POS) | \
72                      BIT(HIDMA_IRQ_TR_CH_DATA_RD_ER_BIT_POS)    | \
73                      BIT(HIDMA_IRQ_TR_CH_DATA_WR_ER_BIT_POS)    | \
74                      BIT(HIDMA_IRQ_TR_CH_INVALID_TRE_BIT_POS))
75
76 #define HIDMA_INCREMENT_ITERATOR(iter, size, ring_size) \
77 do {                                                            \
78         iter += size;                                           \
79         if (iter >= ring_size)                                  \
80                 iter -= ring_size;                              \
81 } while (0)
82
83 #define HIDMA_CH_STATE(val)     \
84         ((val >> HIDMA_CH_STATE_BIT_POS) & HIDMA_CH_STATE_MASK)
85
86 #define HIDMA_ERR_INT_MASK                              \
87         (BIT(HIDMA_IRQ_TR_CH_INVALID_TRE_BIT_POS)   |   \
88          BIT(HIDMA_IRQ_TR_CH_TRE_RD_RSP_ER_BIT_POS) |   \
89          BIT(HIDMA_IRQ_EV_CH_WR_RESP_BIT_POS)       |   \
90          BIT(HIDMA_IRQ_TR_CH_DATA_RD_ER_BIT_POS)    |   \
91          BIT(HIDMA_IRQ_TR_CH_DATA_WR_ER_BIT_POS))
92
93 enum ch_command {
94         HIDMA_CH_DISABLE = 0,
95         HIDMA_CH_ENABLE = 1,
96         HIDMA_CH_SUSPEND = 2,
97         HIDMA_CH_RESET = 9,
98 };
99
100 enum ch_state {
101         HIDMA_CH_DISABLED = 0,
102         HIDMA_CH_ENABLED = 1,
103         HIDMA_CH_RUNNING = 2,
104         HIDMA_CH_SUSPENDED = 3,
105         HIDMA_CH_STOPPED = 4,
106 };
107
108 enum tre_type {
109         HIDMA_TRE_MEMCPY = 3,
110 };
111
112 enum err_code {
113         HIDMA_EVRE_STATUS_COMPLETE = 1,
114         HIDMA_EVRE_STATUS_ERROR = 4,
115 };
116
117 static int hidma_is_chan_enabled(int state)
118 {
119         switch (state) {
120         case HIDMA_CH_ENABLED:
121         case HIDMA_CH_RUNNING:
122                 return true;
123         default:
124                 return false;
125         }
126 }
127
128 void hidma_ll_free(struct hidma_lldev *lldev, u32 tre_ch)
129 {
130         struct hidma_tre *tre;
131
132         if (tre_ch >= lldev->nr_tres) {
133                 dev_err(lldev->dev, "invalid TRE number in free:%d", tre_ch);
134                 return;
135         }
136
137         tre = &lldev->trepool[tre_ch];
138         if (atomic_read(&tre->allocated) != true) {
139                 dev_err(lldev->dev, "trying to free an unused TRE:%d", tre_ch);
140                 return;
141         }
142
143         atomic_set(&tre->allocated, 0);
144 }
145
146 int hidma_ll_request(struct hidma_lldev *lldev, u32 sig, const char *dev_name,
147                      void (*callback)(void *data), void *data, u32 *tre_ch)
148 {
149         unsigned int i;
150         struct hidma_tre *tre;
151         u32 *tre_local;
152
153         if (!tre_ch || !lldev)
154                 return -EINVAL;
155
156         /* need to have at least one empty spot in the queue */
157         for (i = 0; i < lldev->nr_tres - 1; i++) {
158                 if (atomic_add_unless(&lldev->trepool[i].allocated, 1, 1))
159                         break;
160         }
161
162         if (i == (lldev->nr_tres - 1))
163                 return -ENOMEM;
164
165         tre = &lldev->trepool[i];
166         tre->dma_sig = sig;
167         tre->dev_name = dev_name;
168         tre->callback = callback;
169         tre->data = data;
170         tre->idx = i;
171         tre->status = 0;
172         tre->queued = 0;
173         tre->err_code = 0;
174         tre->err_info = 0;
175         tre->lldev = lldev;
176         tre_local = &tre->tre_local[0];
177         tre_local[HIDMA_TRE_CFG_IDX] = HIDMA_TRE_MEMCPY;
178         tre_local[HIDMA_TRE_CFG_IDX] |= (lldev->chidx & 0xFF) << 8;
179         tre_local[HIDMA_TRE_CFG_IDX] |= BIT(16);        /* set IEOB */
180         *tre_ch = i;
181         if (callback)
182                 callback(data);
183         return 0;
184 }
185
186 /*
187  * Multiple TREs may be queued and waiting in the pending queue.
188  */
189 static void hidma_ll_tre_complete(unsigned long arg)
190 {
191         struct hidma_lldev *lldev = (struct hidma_lldev *)arg;
192         struct hidma_tre *tre;
193
194         while (kfifo_out(&lldev->handoff_fifo, &tre, 1)) {
195                 /* call the user if it has been read by the hardware */
196                 if (tre->callback)
197                         tre->callback(tre->data);
198         }
199 }
200
201 static int hidma_post_completed(struct hidma_lldev *lldev, int tre_iterator,
202                                 u8 err_info, u8 err_code)
203 {
204         struct hidma_tre *tre;
205         unsigned long flags;
206
207         spin_lock_irqsave(&lldev->lock, flags);
208         tre = lldev->pending_tre_list[tre_iterator / HIDMA_TRE_SIZE];
209         if (!tre) {
210                 spin_unlock_irqrestore(&lldev->lock, flags);
211                 dev_warn(lldev->dev, "tre_index [%d] and tre out of sync\n",
212                          tre_iterator / HIDMA_TRE_SIZE);
213                 return -EINVAL;
214         }
215         lldev->pending_tre_list[tre->tre_index] = NULL;
216
217         /*
218          * Keep track of pending TREs that SW is expecting to receive
219          * from HW. We got one now. Decrement our counter.
220          */
221         lldev->pending_tre_count--;
222         if (lldev->pending_tre_count < 0) {
223                 dev_warn(lldev->dev, "tre count mismatch on completion");
224                 lldev->pending_tre_count = 0;
225         }
226
227         spin_unlock_irqrestore(&lldev->lock, flags);
228
229         tre->err_info = err_info;
230         tre->err_code = err_code;
231         tre->queued = 0;
232
233         kfifo_put(&lldev->handoff_fifo, tre);
234         tasklet_schedule(&lldev->task);
235
236         return 0;
237 }
238
239 /*
240  * Called to handle the interrupt for the channel.
241  * Return a positive number if TRE or EVRE were consumed on this run.
242  * Return a positive number if there are pending TREs or EVREs.
243  * Return 0 if there is nothing to consume or no pending TREs/EVREs found.
244  */
245 static int hidma_handle_tre_completion(struct hidma_lldev *lldev)
246 {
247         u32 evre_ring_size = lldev->evre_ring_size;
248         u32 tre_ring_size = lldev->tre_ring_size;
249         u32 err_info, err_code, evre_write_off;
250         u32 tre_iterator, evre_iterator;
251         u32 num_completed = 0;
252
253         evre_write_off = readl_relaxed(lldev->evca + HIDMA_EVCA_WRITE_PTR_REG);
254         tre_iterator = lldev->tre_processed_off;
255         evre_iterator = lldev->evre_processed_off;
256
257         if ((evre_write_off > evre_ring_size) ||
258             (evre_write_off % HIDMA_EVRE_SIZE)) {
259                 dev_err(lldev->dev, "HW reports invalid EVRE write offset\n");
260                 return 0;
261         }
262
263         /*
264          * By the time control reaches here the number of EVREs and TREs
265          * may not match. Only consume the ones that hardware told us.
266          */
267         while ((evre_iterator != evre_write_off)) {
268                 u32 *current_evre = lldev->evre_ring + evre_iterator;
269                 u32 cfg;
270
271                 cfg = current_evre[HIDMA_EVRE_CFG_IDX];
272                 err_info = cfg >> HIDMA_EVRE_ERRINFO_BIT_POS;
273                 err_info &= HIDMA_EVRE_ERRINFO_MASK;
274                 err_code =
275                     (cfg >> HIDMA_EVRE_CODE_BIT_POS) & HIDMA_EVRE_CODE_MASK;
276
277                 if (hidma_post_completed(lldev, tre_iterator, err_info,
278                                          err_code))
279                         break;
280
281                 HIDMA_INCREMENT_ITERATOR(tre_iterator, HIDMA_TRE_SIZE,
282                                          tre_ring_size);
283                 HIDMA_INCREMENT_ITERATOR(evre_iterator, HIDMA_EVRE_SIZE,
284                                          evre_ring_size);
285
286                 /*
287                  * Read the new event descriptor written by the HW.
288                  * As we are processing the delivered events, other events
289                  * get queued to the SW for processing.
290                  */
291                 evre_write_off =
292                     readl_relaxed(lldev->evca + HIDMA_EVCA_WRITE_PTR_REG);
293                 num_completed++;
294         }
295
296         if (num_completed) {
297                 u32 evre_read_off = (lldev->evre_processed_off +
298                                      HIDMA_EVRE_SIZE * num_completed);
299                 u32 tre_read_off = (lldev->tre_processed_off +
300                                     HIDMA_TRE_SIZE * num_completed);
301
302                 evre_read_off = evre_read_off % evre_ring_size;
303                 tre_read_off = tre_read_off % tre_ring_size;
304
305                 writel(evre_read_off, lldev->evca + HIDMA_EVCA_DOORBELL_REG);
306
307                 /* record the last processed tre offset */
308                 lldev->tre_processed_off = tre_read_off;
309                 lldev->evre_processed_off = evre_read_off;
310         }
311
312         return num_completed;
313 }
314
315 void hidma_cleanup_pending_tre(struct hidma_lldev *lldev, u8 err_info,
316                                u8 err_code)
317 {
318         u32 tre_iterator;
319         u32 tre_ring_size = lldev->tre_ring_size;
320         int num_completed = 0;
321         u32 tre_read_off;
322
323         tre_iterator = lldev->tre_processed_off;
324         while (lldev->pending_tre_count) {
325                 if (hidma_post_completed(lldev, tre_iterator, err_info,
326                                          err_code))
327                         break;
328                 HIDMA_INCREMENT_ITERATOR(tre_iterator, HIDMA_TRE_SIZE,
329                                          tre_ring_size);
330                 num_completed++;
331         }
332         tre_read_off = (lldev->tre_processed_off +
333                         HIDMA_TRE_SIZE * num_completed);
334
335         tre_read_off = tre_read_off % tre_ring_size;
336
337         /* record the last processed tre offset */
338         lldev->tre_processed_off = tre_read_off;
339 }
340
341 static int hidma_ll_reset(struct hidma_lldev *lldev)
342 {
343         u32 val;
344         int ret;
345
346         val = readl(lldev->trca + HIDMA_TRCA_CTRLSTS_REG);
347         val &= ~(HIDMA_CH_CONTROL_MASK << 16);
348         val |= HIDMA_CH_RESET << 16;
349         writel(val, lldev->trca + HIDMA_TRCA_CTRLSTS_REG);
350
351         /*
352          * Delay 10ms after reset to allow DMA logic to quiesce.
353          * Do a polled read up to 1ms and 10ms maximum.
354          */
355         ret = readl_poll_timeout(lldev->trca + HIDMA_TRCA_CTRLSTS_REG, val,
356                                  HIDMA_CH_STATE(val) == HIDMA_CH_DISABLED,
357                                  1000, 10000);
358         if (ret) {
359                 dev_err(lldev->dev, "transfer channel did not reset\n");
360                 return ret;
361         }
362
363         val = readl(lldev->evca + HIDMA_EVCA_CTRLSTS_REG);
364         val &= ~(HIDMA_CH_CONTROL_MASK << 16);
365         val |= HIDMA_CH_RESET << 16;
366         writel(val, lldev->evca + HIDMA_EVCA_CTRLSTS_REG);
367
368         /*
369          * Delay 10ms after reset to allow DMA logic to quiesce.
370          * Do a polled read up to 1ms and 10ms maximum.
371          */
372         ret = readl_poll_timeout(lldev->evca + HIDMA_EVCA_CTRLSTS_REG, val,
373                                  HIDMA_CH_STATE(val) == HIDMA_CH_DISABLED,
374                                  1000, 10000);
375         if (ret)
376                 return ret;
377
378         lldev->trch_state = HIDMA_CH_DISABLED;
379         lldev->evch_state = HIDMA_CH_DISABLED;
380         return 0;
381 }
382
383 /*
384  * The interrupt handler for HIDMA will try to consume as many pending
385  * EVRE from the event queue as possible. Each EVRE has an associated
386  * TRE that holds the user interface parameters. EVRE reports the
387  * result of the transaction. Hardware guarantees ordering between EVREs
388  * and TREs. We use last processed offset to figure out which TRE is
389  * associated with which EVRE. If two TREs are consumed by HW, the EVREs
390  * are in order in the event ring.
391  *
392  * This handler will do a one pass for consuming EVREs. Other EVREs may
393  * be delivered while we are working. It will try to consume incoming
394  * EVREs one more time and return.
395  *
396  * For unprocessed EVREs, hardware will trigger another interrupt until
397  * all the interrupt bits are cleared.
398  *
399  * Hardware guarantees that by the time interrupt is observed, all data
400  * transactions in flight are delivered to their respective places and
401  * are visible to the CPU.
402  *
403  * On demand paging for IOMMU is only supported for PCIe via PRI
404  * (Page Request Interface) not for HIDMA. All other hardware instances
405  * including HIDMA work on pinned DMA addresses.
406  *
407  * HIDMA is not aware of IOMMU presence since it follows the DMA API. All
408  * IOMMU latency will be built into the data movement time. By the time
409  * interrupt happens, IOMMU lookups + data movement has already taken place.
410  *
411  * While the first read in a typical PCI endpoint ISR flushes all outstanding
412  * requests traditionally to the destination, this concept does not apply
413  * here for this HW.
414  */
415 irqreturn_t hidma_ll_inthandler(int chirq, void *arg)
416 {
417         struct hidma_lldev *lldev = arg;
418         u32 status;
419         u32 enable;
420         u32 cause;
421
422         /*
423          * Fine tuned for this HW...
424          *
425          * This ISR has been designed for this particular hardware. Relaxed
426          * read and write accessors are used for performance reasons due to
427          * interrupt delivery guarantees. Do not copy this code blindly and
428          * expect that to work.
429          */
430         status = readl_relaxed(lldev->evca + HIDMA_EVCA_IRQ_STAT_REG);
431         enable = readl_relaxed(lldev->evca + HIDMA_EVCA_IRQ_EN_REG);
432         cause = status & enable;
433
434         while (cause) {
435                 if (cause & HIDMA_ERR_INT_MASK) {
436                         dev_err(lldev->dev, "error 0x%x, disabling...\n",
437                                         cause);
438
439                         /* Clear out pending interrupts */
440                         writel(cause, lldev->evca + HIDMA_EVCA_IRQ_CLR_REG);
441
442                         /* No further submissions. */
443                         hidma_ll_disable(lldev);
444
445                         /* Driver completes the txn and intimates the client.*/
446                         hidma_cleanup_pending_tre(lldev, 0xFF,
447                                                   HIDMA_EVRE_STATUS_ERROR);
448                         goto out;
449                 }
450
451                 /*
452                  * Try to consume as many EVREs as possible.
453                  */
454                 hidma_handle_tre_completion(lldev);
455
456                 /* We consumed TREs or there are pending TREs or EVREs. */
457                 writel_relaxed(cause, lldev->evca + HIDMA_EVCA_IRQ_CLR_REG);
458
459                 /*
460                  * Another interrupt might have arrived while we are
461                  * processing this one. Read the new cause.
462                  */
463                 status = readl_relaxed(lldev->evca + HIDMA_EVCA_IRQ_STAT_REG);
464                 enable = readl_relaxed(lldev->evca + HIDMA_EVCA_IRQ_EN_REG);
465                 cause = status & enable;
466         }
467
468 out:
469         return IRQ_HANDLED;
470 }
471
472 int hidma_ll_enable(struct hidma_lldev *lldev)
473 {
474         u32 val;
475         int ret;
476
477         val = readl(lldev->evca + HIDMA_EVCA_CTRLSTS_REG);
478         val &= ~(HIDMA_CH_CONTROL_MASK << 16);
479         val |= HIDMA_CH_ENABLE << 16;
480         writel(val, lldev->evca + HIDMA_EVCA_CTRLSTS_REG);
481
482         ret = readl_poll_timeout(lldev->evca + HIDMA_EVCA_CTRLSTS_REG, val,
483                                  hidma_is_chan_enabled(HIDMA_CH_STATE(val)),
484                                  1000, 10000);
485         if (ret) {
486                 dev_err(lldev->dev, "event channel did not get enabled\n");
487                 return ret;
488         }
489
490         val = readl(lldev->trca + HIDMA_TRCA_CTRLSTS_REG);
491         val &= ~(HIDMA_CH_CONTROL_MASK << 16);
492         val |= HIDMA_CH_ENABLE << 16;
493         writel(val, lldev->trca + HIDMA_TRCA_CTRLSTS_REG);
494
495         ret = readl_poll_timeout(lldev->trca + HIDMA_TRCA_CTRLSTS_REG, val,
496                                  hidma_is_chan_enabled(HIDMA_CH_STATE(val)),
497                                  1000, 10000);
498         if (ret) {
499                 dev_err(lldev->dev, "transfer channel did not get enabled\n");
500                 return ret;
501         }
502
503         lldev->trch_state = HIDMA_CH_ENABLED;
504         lldev->evch_state = HIDMA_CH_ENABLED;
505
506         return 0;
507 }
508
509 void hidma_ll_start(struct hidma_lldev *lldev)
510 {
511         unsigned long irqflags;
512
513         spin_lock_irqsave(&lldev->lock, irqflags);
514         writel(lldev->tre_write_offset, lldev->trca + HIDMA_TRCA_DOORBELL_REG);
515         spin_unlock_irqrestore(&lldev->lock, irqflags);
516 }
517
518 bool hidma_ll_isenabled(struct hidma_lldev *lldev)
519 {
520         u32 val;
521
522         val = readl(lldev->trca + HIDMA_TRCA_CTRLSTS_REG);
523         lldev->trch_state = HIDMA_CH_STATE(val);
524         val = readl(lldev->evca + HIDMA_EVCA_CTRLSTS_REG);
525         lldev->evch_state = HIDMA_CH_STATE(val);
526
527         /* both channels have to be enabled before calling this function */
528         if (hidma_is_chan_enabled(lldev->trch_state) &&
529             hidma_is_chan_enabled(lldev->evch_state))
530                 return true;
531
532         return false;
533 }
534
535 void hidma_ll_queue_request(struct hidma_lldev *lldev, u32 tre_ch)
536 {
537         struct hidma_tre *tre;
538         unsigned long flags;
539
540         tre = &lldev->trepool[tre_ch];
541
542         /* copy the TRE into its location in the TRE ring */
543         spin_lock_irqsave(&lldev->lock, flags);
544         tre->tre_index = lldev->tre_write_offset / HIDMA_TRE_SIZE;
545         lldev->pending_tre_list[tre->tre_index] = tre;
546         memcpy(lldev->tre_ring + lldev->tre_write_offset,
547                         &tre->tre_local[0], HIDMA_TRE_SIZE);
548         tre->err_code = 0;
549         tre->err_info = 0;
550         tre->queued = 1;
551         lldev->pending_tre_count++;
552         lldev->tre_write_offset = (lldev->tre_write_offset + HIDMA_TRE_SIZE)
553                                         % lldev->tre_ring_size;
554         spin_unlock_irqrestore(&lldev->lock, flags);
555 }
556
557 /*
558  * Note that even though we stop this channel if there is a pending transaction
559  * in flight it will complete and follow the callback. This request will
560  * prevent further requests to be made.
561  */
562 int hidma_ll_disable(struct hidma_lldev *lldev)
563 {
564         u32 val;
565         int ret;
566
567         val = readl(lldev->evca + HIDMA_EVCA_CTRLSTS_REG);
568         lldev->evch_state = HIDMA_CH_STATE(val);
569         val = readl(lldev->trca + HIDMA_TRCA_CTRLSTS_REG);
570         lldev->trch_state = HIDMA_CH_STATE(val);
571
572         /* already suspended by this OS */
573         if ((lldev->trch_state == HIDMA_CH_SUSPENDED) ||
574             (lldev->evch_state == HIDMA_CH_SUSPENDED))
575                 return 0;
576
577         /* already stopped by the manager */
578         if ((lldev->trch_state == HIDMA_CH_STOPPED) ||
579             (lldev->evch_state == HIDMA_CH_STOPPED))
580                 return 0;
581
582         val = readl(lldev->trca + HIDMA_TRCA_CTRLSTS_REG);
583         val &= ~(HIDMA_CH_CONTROL_MASK << 16);
584         val |= HIDMA_CH_SUSPEND << 16;
585         writel(val, lldev->trca + HIDMA_TRCA_CTRLSTS_REG);
586
587         /*
588          * Start the wait right after the suspend is confirmed.
589          * Do a polled read up to 1ms and 10ms maximum.
590          */
591         ret = readl_poll_timeout(lldev->trca + HIDMA_TRCA_CTRLSTS_REG, val,
592                                  HIDMA_CH_STATE(val) == HIDMA_CH_SUSPENDED,
593                                  1000, 10000);
594         if (ret)
595                 return ret;
596
597         val = readl(lldev->evca + HIDMA_EVCA_CTRLSTS_REG);
598         val &= ~(HIDMA_CH_CONTROL_MASK << 16);
599         val |= HIDMA_CH_SUSPEND << 16;
600         writel(val, lldev->evca + HIDMA_EVCA_CTRLSTS_REG);
601
602         /*
603          * Start the wait right after the suspend is confirmed
604          * Delay up to 10ms after reset to allow DMA logic to quiesce.
605          */
606         ret = readl_poll_timeout(lldev->evca + HIDMA_EVCA_CTRLSTS_REG, val,
607                                  HIDMA_CH_STATE(val) == HIDMA_CH_SUSPENDED,
608                                  1000, 10000);
609         if (ret)
610                 return ret;
611
612         lldev->trch_state = HIDMA_CH_SUSPENDED;
613         lldev->evch_state = HIDMA_CH_SUSPENDED;
614         return 0;
615 }
616
617 void hidma_ll_set_transfer_params(struct hidma_lldev *lldev, u32 tre_ch,
618                                   dma_addr_t src, dma_addr_t dest, u32 len,
619                                   u32 flags)
620 {
621         struct hidma_tre *tre;
622         u32 *tre_local;
623
624         if (tre_ch >= lldev->nr_tres) {
625                 dev_err(lldev->dev, "invalid TRE number in transfer params:%d",
626                         tre_ch);
627                 return;
628         }
629
630         tre = &lldev->trepool[tre_ch];
631         if (atomic_read(&tre->allocated) != true) {
632                 dev_err(lldev->dev, "trying to set params on an unused TRE:%d",
633                         tre_ch);
634                 return;
635         }
636
637         tre_local = &tre->tre_local[0];
638         tre_local[HIDMA_TRE_LEN_IDX] = len;
639         tre_local[HIDMA_TRE_SRC_LOW_IDX] = lower_32_bits(src);
640         tre_local[HIDMA_TRE_SRC_HI_IDX] = upper_32_bits(src);
641         tre_local[HIDMA_TRE_DEST_LOW_IDX] = lower_32_bits(dest);
642         tre_local[HIDMA_TRE_DEST_HI_IDX] = upper_32_bits(dest);
643         tre->int_flags = flags;
644 }
645
646 /*
647  * Called during initialization and after an error condition
648  * to restore hardware state.
649  */
650 int hidma_ll_setup(struct hidma_lldev *lldev)
651 {
652         int rc;
653         u64 addr;
654         u32 val;
655         u32 nr_tres = lldev->nr_tres;
656
657         lldev->pending_tre_count = 0;
658         lldev->tre_processed_off = 0;
659         lldev->evre_processed_off = 0;
660         lldev->tre_write_offset = 0;
661
662         /* disable interrupts */
663         writel(0, lldev->evca + HIDMA_EVCA_IRQ_EN_REG);
664
665         /* clear all pending interrupts */
666         val = readl(lldev->evca + HIDMA_EVCA_IRQ_STAT_REG);
667         writel(val, lldev->evca + HIDMA_EVCA_IRQ_CLR_REG);
668
669         rc = hidma_ll_reset(lldev);
670         if (rc)
671                 return rc;
672
673         /*
674          * Clear all pending interrupts again.
675          * Otherwise, we observe reset complete interrupts.
676          */
677         val = readl(lldev->evca + HIDMA_EVCA_IRQ_STAT_REG);
678         writel(val, lldev->evca + HIDMA_EVCA_IRQ_CLR_REG);
679
680         /* disable interrupts again after reset */
681         writel(0, lldev->evca + HIDMA_EVCA_IRQ_EN_REG);
682
683         addr = lldev->tre_dma;
684         writel(lower_32_bits(addr), lldev->trca + HIDMA_TRCA_RING_LOW_REG);
685         writel(upper_32_bits(addr), lldev->trca + HIDMA_TRCA_RING_HIGH_REG);
686         writel(lldev->tre_ring_size, lldev->trca + HIDMA_TRCA_RING_LEN_REG);
687
688         addr = lldev->evre_dma;
689         writel(lower_32_bits(addr), lldev->evca + HIDMA_EVCA_RING_LOW_REG);
690         writel(upper_32_bits(addr), lldev->evca + HIDMA_EVCA_RING_HIGH_REG);
691         writel(HIDMA_EVRE_SIZE * nr_tres,
692                         lldev->evca + HIDMA_EVCA_RING_LEN_REG);
693
694         /* support IRQ only for now */
695         val = readl(lldev->evca + HIDMA_EVCA_INTCTRL_REG);
696         val &= ~0xF;
697         val |= 0x1;
698         writel(val, lldev->evca + HIDMA_EVCA_INTCTRL_REG);
699
700         /* clear all pending interrupts and enable them */
701         writel(ENABLE_IRQS, lldev->evca + HIDMA_EVCA_IRQ_CLR_REG);
702         writel(ENABLE_IRQS, lldev->evca + HIDMA_EVCA_IRQ_EN_REG);
703
704         return hidma_ll_enable(lldev);
705 }
706
707 struct hidma_lldev *hidma_ll_init(struct device *dev, u32 nr_tres,
708                                   void __iomem *trca, void __iomem *evca,
709                                   u8 chidx)
710 {
711         u32 required_bytes;
712         struct hidma_lldev *lldev;
713         int rc;
714         size_t sz;
715
716         if (!trca || !evca || !dev || !nr_tres)
717                 return NULL;
718
719         /* need at least four TREs */
720         if (nr_tres < 4)
721                 return NULL;
722
723         /* need an extra space */
724         nr_tres += 1;
725
726         lldev = devm_kzalloc(dev, sizeof(struct hidma_lldev), GFP_KERNEL);
727         if (!lldev)
728                 return NULL;
729
730         lldev->evca = evca;
731         lldev->trca = trca;
732         lldev->dev = dev;
733         sz = sizeof(struct hidma_tre);
734         lldev->trepool = devm_kcalloc(lldev->dev, nr_tres, sz, GFP_KERNEL);
735         if (!lldev->trepool)
736                 return NULL;
737
738         required_bytes = sizeof(lldev->pending_tre_list[0]);
739         lldev->pending_tre_list = devm_kcalloc(dev, nr_tres, required_bytes,
740                                                GFP_KERNEL);
741         if (!lldev->pending_tre_list)
742                 return NULL;
743
744         sz = (HIDMA_TRE_SIZE + 1) * nr_tres;
745         lldev->tre_ring = dmam_alloc_coherent(dev, sz, &lldev->tre_dma,
746                                               GFP_KERNEL);
747         if (!lldev->tre_ring)
748                 return NULL;
749
750         memset(lldev->tre_ring, 0, (HIDMA_TRE_SIZE + 1) * nr_tres);
751         lldev->tre_ring_size = HIDMA_TRE_SIZE * nr_tres;
752         lldev->nr_tres = nr_tres;
753
754         /* the TRE ring has to be TRE_SIZE aligned */
755         if (!IS_ALIGNED(lldev->tre_dma, HIDMA_TRE_SIZE)) {
756                 u8 tre_ring_shift;
757
758                 tre_ring_shift = lldev->tre_dma % HIDMA_TRE_SIZE;
759                 tre_ring_shift = HIDMA_TRE_SIZE - tre_ring_shift;
760                 lldev->tre_dma += tre_ring_shift;
761                 lldev->tre_ring += tre_ring_shift;
762         }
763
764         sz = (HIDMA_EVRE_SIZE + 1) * nr_tres;
765         lldev->evre_ring = dmam_alloc_coherent(dev, sz, &lldev->evre_dma,
766                                                GFP_KERNEL);
767         if (!lldev->evre_ring)
768                 return NULL;
769
770         memset(lldev->evre_ring, 0, (HIDMA_EVRE_SIZE + 1) * nr_tres);
771         lldev->evre_ring_size = HIDMA_EVRE_SIZE * nr_tres;
772
773         /* the EVRE ring has to be EVRE_SIZE aligned */
774         if (!IS_ALIGNED(lldev->evre_dma, HIDMA_EVRE_SIZE)) {
775                 u8 evre_ring_shift;
776
777                 evre_ring_shift = lldev->evre_dma % HIDMA_EVRE_SIZE;
778                 evre_ring_shift = HIDMA_EVRE_SIZE - evre_ring_shift;
779                 lldev->evre_dma += evre_ring_shift;
780                 lldev->evre_ring += evre_ring_shift;
781         }
782         lldev->nr_tres = nr_tres;
783         lldev->chidx = chidx;
784
785         sz = nr_tres * sizeof(struct hidma_tre *);
786         rc = kfifo_alloc(&lldev->handoff_fifo, sz, GFP_KERNEL);
787         if (rc)
788                 return NULL;
789
790         rc = hidma_ll_setup(lldev);
791         if (rc)
792                 return NULL;
793
794         spin_lock_init(&lldev->lock);
795         tasklet_init(&lldev->task, hidma_ll_tre_complete, (unsigned long)lldev);
796         lldev->initialized = 1;
797         writel(ENABLE_IRQS, lldev->evca + HIDMA_EVCA_IRQ_EN_REG);
798         return lldev;
799 }
800
801 int hidma_ll_uninit(struct hidma_lldev *lldev)
802 {
803         u32 required_bytes;
804         int rc = 0;
805         u32 val;
806
807         if (!lldev)
808                 return -ENODEV;
809
810         if (!lldev->initialized)
811                 return 0;
812
813         lldev->initialized = 0;
814
815         required_bytes = sizeof(struct hidma_tre) * lldev->nr_tres;
816         tasklet_kill(&lldev->task);
817         memset(lldev->trepool, 0, required_bytes);
818         lldev->trepool = NULL;
819         lldev->pending_tre_count = 0;
820         lldev->tre_write_offset = 0;
821
822         rc = hidma_ll_reset(lldev);
823
824         /*
825          * Clear all pending interrupts again.
826          * Otherwise, we observe reset complete interrupts.
827          */
828         val = readl(lldev->evca + HIDMA_EVCA_IRQ_STAT_REG);
829         writel(val, lldev->evca + HIDMA_EVCA_IRQ_CLR_REG);
830         writel(0, lldev->evca + HIDMA_EVCA_IRQ_EN_REG);
831         return rc;
832 }
833
834 enum dma_status hidma_ll_status(struct hidma_lldev *lldev, u32 tre_ch)
835 {
836         enum dma_status ret = DMA_ERROR;
837         struct hidma_tre *tre;
838         unsigned long flags;
839         u8 err_code;
840
841         spin_lock_irqsave(&lldev->lock, flags);
842
843         tre = &lldev->trepool[tre_ch];
844         err_code = tre->err_code;
845
846         if (err_code & HIDMA_EVRE_STATUS_COMPLETE)
847                 ret = DMA_COMPLETE;
848         else if (err_code & HIDMA_EVRE_STATUS_ERROR)
849                 ret = DMA_ERROR;
850         else
851                 ret = DMA_IN_PROGRESS;
852         spin_unlock_irqrestore(&lldev->lock, flags);
853
854         return ret;
855 }