drivers/media/usb/au0828/au0828-cards.c

   1 /*
   2  *  Driver for the Auvitek USB bridge
   3  *
   4  *  Copyright (c) 2008 Steven Toth <stoth@linuxtv.org>
   5  *
   6  *  This program is free software; you can redistribute it and/or modify
   7  *  it under the terms of the GNU General Public License as published by
   8  *  the Free Software Foundation; either version 2 of the License, or
   9  *  (at your option) any later version.
  10  *
  11  *  This program is distributed in the hope that it will be useful,
  12  *  but WITHOUT ANY WARRANTY; without even the implied warranty of
  13  *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  14  *
  15  *  GNU General Public License for more details.
  16  *
  17  *  You should have received a copy of the GNU General Public License
  18  *  along with this program; if not, write to the Free Software
  19  *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  20  */
  21
  22 #include "au0828.h"
  23 #include "au0828-cards.h"
  24 #include "au8522.h"
  25 #include "media/tuner.h"
  26 #include "media/v4l2-common.h"
  27
  28 static void hvr950q_cs5340_audio(void *priv, int enable)
  29 {
  30         /* Because the HVR-950q shares an i2s bus between the cs5340 and the
  31            au8522, we need to hold cs5340 in reset when using the au8522 */
  32         struct au0828_dev *dev = priv;
  33         if (enable == 1)
  34                 au0828_set(dev, REG_000, 0x10);
  35         else
  36                 au0828_clear(dev, REG_000, 0x10);
  37 }
  38
  39 /*
  40  * WARNING: There's a quirks table at sound/usb/quirks-table.h
  41  * that should also be updated every time a new device with V4L2 support
  42  * is added here.
  43  */
  44 struct au0828_board au0828_boards[] = {
  45         [AU0828_BOARD_UNKNOWN] = {
  46                 .name   = "Unknown board",
  47                 .tuner_type = -1U,
  48                 .tuner_addr = ADDR_UNSET,
  49         },
  50         [AU0828_BOARD_HAUPPAUGE_HVR850] = {
  51                 .name   = "Hauppauge HVR850",
  52                 .tuner_type = TUNER_XC5000,
  53                 .tuner_addr = 0x61,
  54                 .has_ir_i2c = 1,
  55                 .has_analog = 1,
  56                 .i2c_clk_divider = AU0828_I2C_CLK_250KHZ,
  57                 .input = {
  58                         {
  59                                 .type = AU0828_VMUX_TELEVISION,
  60                                 .vmux = AU8522_COMPOSITE_CH4_SIF,
  61                                 .amux = AU8522_AUDIO_SIF,
  62                         },
  63                         {
  64                                 .type = AU0828_VMUX_COMPOSITE,
  65                                 .vmux = AU8522_COMPOSITE_CH1,
  66                                 .amux = AU8522_AUDIO_NONE,
  67                                 .audio_setup = hvr950q_cs5340_audio,
  68                         },
  69                         {
  70                                 .type = AU0828_VMUX_SVIDEO,
  71                                 .vmux = AU8522_SVIDEO_CH13,
  72                                 .amux = AU8522_AUDIO_NONE,
  73                                 .audio_setup = hvr950q_cs5340_audio,
  74                         },
  75                 },
  76         },
  77         [AU0828_BOARD_HAUPPAUGE_HVR950Q] = {
  78                 .name   = "Hauppauge HVR950Q",
  79                 .tuner_type = TUNER_XC5000,
  80                 .tuner_addr = 0x61,
  81                 .has_ir_i2c = 1,
  82                 .has_analog = 1,
  83                 .i2c_clk_divider = AU0828_I2C_CLK_250KHZ,
  84                 .input = {
  85                         {
  86                                 .type = AU0828_VMUX_TELEVISION,
  87                                 .vmux = AU8522_COMPOSITE_CH4_SIF,
  88                                 .amux = AU8522_AUDIO_SIF,
  89                         },
  90                         {
  91                                 .type = AU0828_VMUX_COMPOSITE,
  92                                 .vmux = AU8522_COMPOSITE_CH1,
  93                                 .amux = AU8522_AUDIO_NONE,
  94                                 .audio_setup = hvr950q_cs5340_audio,
  95                         },
  96                         {
  97                                 .type = AU0828_VMUX_SVIDEO,
  98                                 .vmux = AU8522_SVIDEO_CH13,
  99                                 .amux = AU8522_AUDIO_NONE,
 100                                 .audio_setup = hvr950q_cs5340_audio,
 101                         },
 102                 },
 103         },
 104         [AU0828_BOARD_HAUPPAUGE_HVR950Q_MXL] = {
 105                 .name   = "Hauppauge HVR950Q rev xxF8",
 106                 .tuner_type = TUNER_XC5000,
 107                 .tuner_addr = 0x61,
 108                 .i2c_clk_divider = AU0828_I2C_CLK_250KHZ,
 109         },
 110         [AU0828_BOARD_DVICO_FUSIONHDTV7] = {
 111                 .name   = "DViCO FusionHDTV USB",
 112                 .tuner_type = TUNER_XC5000,
 113                 .tuner_addr = 0x61,
 114                 .i2c_clk_divider = AU0828_I2C_CLK_250KHZ,
 115         },
 116         [AU0828_BOARD_HAUPPAUGE_WOODBURY] = {
 117                 .name = "Hauppauge Woodbury",
 118                 .tuner_type = TUNER_NXP_TDA18271,
 119                 .tuner_addr = 0x60,
 120                 .i2c_clk_divider = AU0828_I2C_CLK_250KHZ,
 121         },
 122 };
 123
 124 /* Tuner callback function for au0828 boards. Currently only needed
 125  * for HVR1500Q, which has an xc5000 tuner.
 126  */
 127 int au0828_tuner_callback(void *priv, int component, int command, int arg)
 128 {
 129         struct au0828_dev *dev = priv;
 130
 131         dprintk(1, "%s()\n", __func__);
 132
 133         switch (dev->boardnr) {
 134         case AU0828_BOARD_HAUPPAUGE_HVR850:
 135         case AU0828_BOARD_HAUPPAUGE_HVR950Q:
 136         case AU0828_BOARD_HAUPPAUGE_HVR950Q_MXL:
 137         case AU0828_BOARD_DVICO_FUSIONHDTV7:
 138                 if (command == 0) {
 139                         /* Tuner Reset Command from xc5000 */
 140                         /* Drive the tuner into reset and out */
 141                         au0828_clear(dev, REG_001, 2);
 142                         mdelay(10);
 143                         au0828_set(dev, REG_001, 2);
 144                         mdelay(10);
 145                         return 0;
 146                 } else {
 147                         pr_err("%s(): Unknown command.\n", __func__);
 148                         return -EINVAL;
 149                 }
 150                 break;
 151         }
 152
 153         return 0; /* Should never be here */
 154 }
 155
 156 static void hauppauge_eeprom(struct au0828_dev *dev, u8 *eeprom_data)
 157 {
 158         struct tveeprom tv;
 159
 160         tveeprom_hauppauge_analog(&dev->i2c_client, &tv, eeprom_data);
 161         dev->board.tuner_type = tv.tuner_type;
 162
 163         /* Make sure we support the board model */
 164         switch (tv.model) {
 165         case 72000: /* WinTV-HVR950q (Retail, IR, ATSC/QAM */
 166         case 72001: /* WinTV-HVR950q (Retail, IR, ATSC/QAM and analog video */
 167         case 72101: /* WinTV-HVR950q (Retail, IR, ATSC/QAM and analog video */
 168         case 72201: /* WinTV-HVR950q (OEM, IR, ATSC/QAM and analog video */
 169         case 72211: /* WinTV-HVR950q (OEM, IR, ATSC/QAM and analog video */
 170         case 72221: /* WinTV-HVR950q (OEM, IR, ATSC/QAM and analog video */
 171         case 72231: /* WinTV-HVR950q (OEM, IR, ATSC/QAM and analog video */
 172         case 72241: /* WinTV-HVR950q (OEM, No IR, ATSC/QAM and analog video */
 173         case 72251: /* WinTV-HVR950q (Retail, IR, ATSC/QAM and analog video */
 174         case 72261: /* WinTV-HVR950q (OEM, No IR, ATSC/QAM and analog video */
 175         case 72271: /* WinTV-HVR950q (OEM, No IR, ATSC/QAM and analog video */
 176         case 72281: /* WinTV-HVR950q (OEM, No IR, ATSC/QAM and analog video */
 177         case 72301: /* WinTV-HVR850 (Retail, IR, ATSC and analog video */
 178         case 72500: /* WinTV-HVR950q (OEM, No IR, ATSC/QAM */
 179                 break;
 180         default:
 181                 pr_warn("%s: warning: unknown hauppauge model #%d\n",
 182                         __func__, tv.model);
 183                 break;
 184         }
 185
 186         pr_info("%s: hauppauge eeprom: model=%d\n",
 187                __func__, tv.model);
 188 }
 189
 190 void au0828_card_analog_fe_setup(struct au0828_dev *dev);
 191
 192 void au0828_card_setup(struct au0828_dev *dev)
 193 {
 194         static u8 eeprom[256];
 195
 196         dprintk(1, "%s()\n", __func__);
 197
 198         if (dev->i2c_rc == 0) {
 199                 dev->i2c_client.addr = 0xa0 >> 1;
 200                 tveeprom_read(&dev->i2c_client, eeprom, sizeof(eeprom));
 201         }
 202
 203         switch (dev->boardnr) {
 204         case AU0828_BOARD_HAUPPAUGE_HVR850:
 205         case AU0828_BOARD_HAUPPAUGE_HVR950Q:
 206         case AU0828_BOARD_HAUPPAUGE_HVR950Q_MXL:
 207         case AU0828_BOARD_HAUPPAUGE_WOODBURY:
 208                 if (dev->i2c_rc == 0)
 209                         hauppauge_eeprom(dev, eeprom+0xa0);
 210                 break;
 211         }
 212
 213         au0828_card_analog_fe_setup(dev);
 214 }
 215
 216 void au0828_card_analog_fe_setup(struct au0828_dev *dev)
 217 {
 218 #ifdef CONFIG_VIDEO_AU0828_V4L2
 219         struct tuner_setup tun_setup;
 220         struct v4l2_subdev *sd;
 221         unsigned int mode_mask = T_ANALOG_TV;
 222
 223         if (AUVI_INPUT(0).type != AU0828_VMUX_UNDEFINED) {
 224                 /* Load the analog demodulator driver (note this would need to
 225                    be abstracted out if we ever need to support a different
 226                    demod) */
 227                 sd = v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap,
 228                                 "au8522", 0x8e >> 1, NULL);
 229                 if (sd == NULL)
 230                         pr_err("analog subdev registration failed\n");
 231 #ifdef CONFIG_MEDIA_CONTROLLER
 232                 if (sd)
 233                         dev->decoder = &sd->entity;
 234 #endif
 235         }
 236
 237         /* Setup tuners */
 238         if (dev->board.tuner_type != TUNER_ABSENT && dev->board.has_analog) {
 239                 /* Load the tuner module, which does the attach */
 240                 sd = v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap,
 241                                 "tuner", dev->board.tuner_addr, NULL);
 242                 if (sd == NULL)
 243                         pr_err("tuner subdev registration fail\n");
 244
 245                 tun_setup.mode_mask      = mode_mask;
 246                 tun_setup.type           = dev->board.tuner_type;
 247                 tun_setup.addr           = dev->board.tuner_addr;
 248                 tun_setup.tuner_callback = au0828_tuner_callback;
 249                 v4l2_device_call_all(&dev->v4l2_dev, 0, tuner, s_type_addr,
 250                                      &tun_setup);
 251         }
 252 #endif
 253 }
 254
 255 /*
 256  * The bridge has between 8 and 12 gpios.
 257  * Regs 1 and 0 deal with output enables.
 258  * Regs 3 and 2 deal with direction.
 259  */
 260 void au0828_gpio_setup(struct au0828_dev *dev)
 261 {
 262         dprintk(1, "%s()\n", __func__);
 263
 264         switch (dev->boardnr) {
 265         case AU0828_BOARD_HAUPPAUGE_HVR850:
 266         case AU0828_BOARD_HAUPPAUGE_HVR950Q:
 267         case AU0828_BOARD_HAUPPAUGE_HVR950Q_MXL:
 268         case AU0828_BOARD_HAUPPAUGE_WOODBURY:
 269                 /* GPIO's
 270                  * 4 - CS5340
 271                  * 5 - AU8522 Demodulator
 272                  * 6 - eeprom W/P
 273                  * 7 - power supply
 274                  * 9 - XC5000 Tuner
 275                  */
 276
 277                 /* Set relevant GPIOs as outputs (leave the EEPROM W/P
 278                    as an input since we will never touch it and it has
 279                    a pullup) */
 280                 au0828_write(dev, REG_003, 0x02);
 281                 au0828_write(dev, REG_002, 0x80 | 0x20 | 0x10);
 282
 283                 /* Into reset */
 284                 au0828_write(dev, REG_001, 0x0);
 285                 au0828_write(dev, REG_000, 0x0);
 286                 msleep(50);
 287
 288                 /* Bring power supply out of reset */
 289                 au0828_write(dev, REG_000, 0x80);
 290                 msleep(50);
 291
 292                 /* Bring xc5000 and au8522 out of reset (leave the
 293                    cs5340 in reset until needed) */
 294                 au0828_write(dev, REG_001, 0x02); /* xc5000 */
 295                 au0828_write(dev, REG_000, 0x80 | 0x20); /* PS + au8522 */
 296
 297                 msleep(250);
 298                 break;
 299         case AU0828_BOARD_DVICO_FUSIONHDTV7:
 300                 /* GPIO's
 301                  * 6 - ?
 302                  * 8 - AU8522 Demodulator
 303                  * 9 - XC5000 Tuner
 304                  */
 305
 306                 /* Into reset */
 307                 au0828_write(dev, REG_003, 0x02);
 308                 au0828_write(dev, REG_002, 0xa0);
 309                 au0828_write(dev, REG_001, 0x0);
 310                 au0828_write(dev, REG_000, 0x0);
 311                 msleep(100);
 312
 313                 /* Out of reset */
 314                 au0828_write(dev, REG_003, 0x02);
 315                 au0828_write(dev, REG_002, 0xa0);
 316                 au0828_write(dev, REG_001, 0x02);
 317                 au0828_write(dev, REG_000, 0xa0);
 318                 msleep(250);
 319                 break;
 320         }
 321 }
 322
 323 /* table of devices that work with this driver */
 324 struct usb_device_id au0828_usb_id_table[] = {
 325         { USB_DEVICE(0x2040, 0x7200),
 326                 .driver_info = AU0828_BOARD_HAUPPAUGE_HVR950Q },
 327         { USB_DEVICE(0x2040, 0x7240),
 328                 .driver_info = AU0828_BOARD_HAUPPAUGE_HVR850 },
 329         { USB_DEVICE(0x0fe9, 0xd620),
 330                 .driver_info = AU0828_BOARD_DVICO_FUSIONHDTV7 },
 331         { USB_DEVICE(0x2040, 0x7210),
 332                 .driver_info = AU0828_BOARD_HAUPPAUGE_HVR950Q },
 333         { USB_DEVICE(0x2040, 0x7217),
 334                 .driver_info = AU0828_BOARD_HAUPPAUGE_HVR950Q },
 335         { USB_DEVICE(0x2040, 0x721b),
 336                 .driver_info = AU0828_BOARD_HAUPPAUGE_HVR950Q },
 337         { USB_DEVICE(0x2040, 0x721e),
 338                 .driver_info = AU0828_BOARD_HAUPPAUGE_HVR950Q },
 339         { USB_DEVICE(0x2040, 0x721f),
 340                 .driver_info = AU0828_BOARD_HAUPPAUGE_HVR950Q },
 341         { USB_DEVICE(0x2040, 0x7280),
 342                 .driver_info = AU0828_BOARD_HAUPPAUGE_HVR950Q },
 343         { USB_DEVICE(0x0fd9, 0x0008),
 344                 .driver_info = AU0828_BOARD_HAUPPAUGE_HVR950Q },
 345         { USB_DEVICE(0x2040, 0x7201),
 346                 .driver_info = AU0828_BOARD_HAUPPAUGE_HVR950Q_MXL },
 347         { USB_DEVICE(0x2040, 0x7211),
 348                 .driver_info = AU0828_BOARD_HAUPPAUGE_HVR950Q_MXL },
 349         { USB_DEVICE(0x2040, 0x7281),
 350                 .driver_info = AU0828_BOARD_HAUPPAUGE_HVR950Q_MXL },
 351         { USB_DEVICE(0x05e1, 0x0480),
 352                 .driver_info = AU0828_BOARD_HAUPPAUGE_WOODBURY },
 353         { USB_DEVICE(0x2040, 0x8200),
 354                 .driver_info = AU0828_BOARD_HAUPPAUGE_WOODBURY },
 355         { USB_DEVICE(0x2040, 0x7260),
 356                 .driver_info = AU0828_BOARD_HAUPPAUGE_HVR950Q },
 357         { USB_DEVICE(0x2040, 0x7213),
 358                 .driver_info = AU0828_BOARD_HAUPPAUGE_HVR950Q },
 359         { USB_DEVICE(0x2040, 0x7270),
 360                 .driver_info = AU0828_BOARD_HAUPPAUGE_HVR950Q },
 361         { },
 362 };
 363
 364 MODULE_DEVICE_TABLE(usb, au0828_usb_id_table);