Merge tag 'kvm-arm-for-4-7-take2' of git://git.kernel.org/pub/scm/linux/kernel/git...
[cascardo/linux.git] / drivers / mmc / host / tmio_mmc_pio.c
1 /*
2  * linux/drivers/mmc/host/tmio_mmc_pio.c
3  *
4  * Copyright (C) 2016 Sang Engineering, Wolfram Sang
5  * Copyright (C) 2015-16 Renesas Electronics Corporation
6  * Copyright (C) 2011 Guennadi Liakhovetski
7  * Copyright (C) 2007 Ian Molton
8  * Copyright (C) 2004 Ian Molton
9  *
10  * This program is free software; you can redistribute it and/or modify
11  * it under the terms of the GNU General Public License version 2 as
12  * published by the Free Software Foundation.
13  *
14  * Driver for the MMC / SD / SDIO IP found in:
15  *
16  * TC6393XB, TC6391XB, TC6387XB, T7L66XB, ASIC3, SH-Mobile SoCs
17  *
18  * This driver draws mainly on scattered spec sheets, Reverse engineering
19  * of the toshiba e800  SD driver and some parts of the 2.4 ASIC3 driver (4 bit
20  * support). (Further 4 bit support from a later datasheet).
21  *
22  * TODO:
23  *   Investigate using a workqueue for PIO transfers
24  *   Eliminate FIXMEs
25  *   SDIO support
26  *   Better Power management
27  *   Handle MMC errors better
28  *   double buffer support
29  *
30  */
31
32 #include <linux/delay.h>
33 #include <linux/device.h>
34 #include <linux/highmem.h>
35 #include <linux/interrupt.h>
36 #include <linux/io.h>
37 #include <linux/irq.h>
38 #include <linux/mfd/tmio.h>
39 #include <linux/mmc/host.h>
40 #include <linux/mmc/mmc.h>
41 #include <linux/mmc/slot-gpio.h>
42 #include <linux/mmc/tmio.h>
43 #include <linux/module.h>
44 #include <linux/pagemap.h>
45 #include <linux/platform_device.h>
46 #include <linux/pm_qos.h>
47 #include <linux/pm_runtime.h>
48 #include <linux/regulator/consumer.h>
49 #include <linux/mmc/sdio.h>
50 #include <linux/scatterlist.h>
51 #include <linux/spinlock.h>
52 #include <linux/workqueue.h>
53
54 #include "tmio_mmc.h"
55
56 void tmio_mmc_enable_mmc_irqs(struct tmio_mmc_host *host, u32 i)
57 {
58         host->sdcard_irq_mask &= ~(i & TMIO_MASK_IRQ);
59         sd_ctrl_write32(host, CTL_IRQ_MASK, host->sdcard_irq_mask);
60 }
61
62 void tmio_mmc_disable_mmc_irqs(struct tmio_mmc_host *host, u32 i)
63 {
64         host->sdcard_irq_mask |= (i & TMIO_MASK_IRQ);
65         sd_ctrl_write32(host, CTL_IRQ_MASK, host->sdcard_irq_mask);
66 }
67
68 static void tmio_mmc_ack_mmc_irqs(struct tmio_mmc_host *host, u32 i)
69 {
70         sd_ctrl_write32(host, CTL_STATUS, ~i);
71 }
72
73 static void tmio_mmc_init_sg(struct tmio_mmc_host *host, struct mmc_data *data)
74 {
75         host->sg_len = data->sg_len;
76         host->sg_ptr = data->sg;
77         host->sg_orig = data->sg;
78         host->sg_off = 0;
79 }
80
81 static int tmio_mmc_next_sg(struct tmio_mmc_host *host)
82 {
83         host->sg_ptr = sg_next(host->sg_ptr);
84         host->sg_off = 0;
85         return --host->sg_len;
86 }
87
88 #define CMDREQ_TIMEOUT  5000
89
90 #ifdef CONFIG_MMC_DEBUG
91
92 #define STATUS_TO_TEXT(a, status, i) \
93         do { \
94                 if (status & TMIO_STAT_##a) { \
95                         if (i++) \
96                                 printk(" | "); \
97                         printk(#a); \
98                 } \
99         } while (0)
100
101 static void pr_debug_status(u32 status)
102 {
103         int i = 0;
104         pr_debug("status: %08x = ", status);
105         STATUS_TO_TEXT(CARD_REMOVE, status, i);
106         STATUS_TO_TEXT(CARD_INSERT, status, i);
107         STATUS_TO_TEXT(SIGSTATE, status, i);
108         STATUS_TO_TEXT(WRPROTECT, status, i);
109         STATUS_TO_TEXT(CARD_REMOVE_A, status, i);
110         STATUS_TO_TEXT(CARD_INSERT_A, status, i);
111         STATUS_TO_TEXT(SIGSTATE_A, status, i);
112         STATUS_TO_TEXT(CMD_IDX_ERR, status, i);
113         STATUS_TO_TEXT(STOPBIT_ERR, status, i);
114         STATUS_TO_TEXT(ILL_FUNC, status, i);
115         STATUS_TO_TEXT(CMD_BUSY, status, i);
116         STATUS_TO_TEXT(CMDRESPEND, status, i);
117         STATUS_TO_TEXT(DATAEND, status, i);
118         STATUS_TO_TEXT(CRCFAIL, status, i);
119         STATUS_TO_TEXT(DATATIMEOUT, status, i);
120         STATUS_TO_TEXT(CMDTIMEOUT, status, i);
121         STATUS_TO_TEXT(RXOVERFLOW, status, i);
122         STATUS_TO_TEXT(TXUNDERRUN, status, i);
123         STATUS_TO_TEXT(RXRDY, status, i);
124         STATUS_TO_TEXT(TXRQ, status, i);
125         STATUS_TO_TEXT(ILL_ACCESS, status, i);
126         printk("\n");
127 }
128
129 #else
130 #define pr_debug_status(s)  do { } while (0)
131 #endif
132
133 static void tmio_mmc_enable_sdio_irq(struct mmc_host *mmc, int enable)
134 {
135         struct tmio_mmc_host *host = mmc_priv(mmc);
136
137         if (enable && !host->sdio_irq_enabled) {
138                 /* Keep device active while SDIO irq is enabled */
139                 pm_runtime_get_sync(mmc_dev(mmc));
140                 host->sdio_irq_enabled = true;
141
142                 host->sdio_irq_mask = TMIO_SDIO_MASK_ALL &
143                                         ~TMIO_SDIO_STAT_IOIRQ;
144                 sd_ctrl_write16(host, CTL_TRANSACTION_CTL, 0x0001);
145                 sd_ctrl_write16(host, CTL_SDIO_IRQ_MASK, host->sdio_irq_mask);
146         } else if (!enable && host->sdio_irq_enabled) {
147                 host->sdio_irq_mask = TMIO_SDIO_MASK_ALL;
148                 sd_ctrl_write16(host, CTL_SDIO_IRQ_MASK, host->sdio_irq_mask);
149                 sd_ctrl_write16(host, CTL_TRANSACTION_CTL, 0x0000);
150
151                 host->sdio_irq_enabled = false;
152                 pm_runtime_mark_last_busy(mmc_dev(mmc));
153                 pm_runtime_put_autosuspend(mmc_dev(mmc));
154         }
155 }
156
157 static void tmio_mmc_set_clock(struct tmio_mmc_host *host,
158                                 unsigned int new_clock)
159 {
160         u32 clk = 0, clock;
161
162         if (new_clock) {
163                 for (clock = host->mmc->f_min, clk = 0x80000080;
164                      new_clock >= (clock << 1);
165                      clk >>= 1)
166                         clock <<= 1;
167
168                 /* 1/1 clock is option */
169                 if ((host->pdata->flags & TMIO_MMC_CLK_ACTUAL) &&
170                    ((clk >> 22) & 0x1))
171                         clk |= 0xff;
172         }
173
174         if (host->set_clk_div)
175                 host->set_clk_div(host->pdev, (clk >> 22) & 1);
176
177         sd_ctrl_write16(host, CTL_SD_CARD_CLK_CTL, ~CLK_CTL_SCLKEN &
178                         sd_ctrl_read16(host, CTL_SD_CARD_CLK_CTL));
179         sd_ctrl_write16(host, CTL_SD_CARD_CLK_CTL, clk & CLK_CTL_DIV_MASK);
180         if (!(host->pdata->flags & TMIO_MMC_FAST_CLK_CHG))
181                 msleep(10);
182 }
183
184 static void tmio_mmc_clk_stop(struct tmio_mmc_host *host)
185 {
186         if (host->pdata->flags & TMIO_MMC_HAVE_HIGH_REG) {
187                 sd_ctrl_write16(host, CTL_CLK_AND_WAIT_CTL, 0x0000);
188                 msleep(10);
189         }
190
191         sd_ctrl_write16(host, CTL_SD_CARD_CLK_CTL, ~CLK_CTL_SCLKEN &
192                 sd_ctrl_read16(host, CTL_SD_CARD_CLK_CTL));
193         msleep(host->pdata->flags & TMIO_MMC_FAST_CLK_CHG ? 5 : 10);
194 }
195
196 static void tmio_mmc_clk_start(struct tmio_mmc_host *host)
197 {
198         sd_ctrl_write16(host, CTL_SD_CARD_CLK_CTL, CLK_CTL_SCLKEN |
199                 sd_ctrl_read16(host, CTL_SD_CARD_CLK_CTL));
200         msleep(host->pdata->flags & TMIO_MMC_FAST_CLK_CHG ? 1 : 10);
201
202         if (host->pdata->flags & TMIO_MMC_HAVE_HIGH_REG) {
203                 sd_ctrl_write16(host, CTL_CLK_AND_WAIT_CTL, 0x0100);
204                 msleep(10);
205         }
206 }
207
208 static void tmio_mmc_reset(struct tmio_mmc_host *host)
209 {
210         /* FIXME - should we set stop clock reg here */
211         sd_ctrl_write16(host, CTL_RESET_SD, 0x0000);
212         if (host->pdata->flags & TMIO_MMC_HAVE_HIGH_REG)
213                 sd_ctrl_write16(host, CTL_RESET_SDIO, 0x0000);
214         msleep(10);
215         sd_ctrl_write16(host, CTL_RESET_SD, 0x0001);
216         if (host->pdata->flags & TMIO_MMC_HAVE_HIGH_REG)
217                 sd_ctrl_write16(host, CTL_RESET_SDIO, 0x0001);
218         msleep(10);
219 }
220
221 static void tmio_mmc_reset_work(struct work_struct *work)
222 {
223         struct tmio_mmc_host *host = container_of(work, struct tmio_mmc_host,
224                                                   delayed_reset_work.work);
225         struct mmc_request *mrq;
226         unsigned long flags;
227
228         spin_lock_irqsave(&host->lock, flags);
229         mrq = host->mrq;
230
231         /*
232          * is request already finished? Since we use a non-blocking
233          * cancel_delayed_work(), it can happen, that a .set_ios() call preempts
234          * us, so, have to check for IS_ERR(host->mrq)
235          */
236         if (IS_ERR_OR_NULL(mrq)
237             || time_is_after_jiffies(host->last_req_ts +
238                 msecs_to_jiffies(CMDREQ_TIMEOUT))) {
239                 spin_unlock_irqrestore(&host->lock, flags);
240                 return;
241         }
242
243         dev_warn(&host->pdev->dev,
244                 "timeout waiting for hardware interrupt (CMD%u)\n",
245                 mrq->cmd->opcode);
246
247         if (host->data)
248                 host->data->error = -ETIMEDOUT;
249         else if (host->cmd)
250                 host->cmd->error = -ETIMEDOUT;
251         else
252                 mrq->cmd->error = -ETIMEDOUT;
253
254         host->cmd = NULL;
255         host->data = NULL;
256         host->force_pio = false;
257
258         spin_unlock_irqrestore(&host->lock, flags);
259
260         tmio_mmc_reset(host);
261
262         /* Ready for new calls */
263         host->mrq = NULL;
264
265         tmio_mmc_abort_dma(host);
266         mmc_request_done(host->mmc, mrq);
267
268         pm_runtime_mark_last_busy(mmc_dev(host->mmc));
269         pm_runtime_put_autosuspend(mmc_dev(host->mmc));
270 }
271
272 /* called with host->lock held, interrupts disabled */
273 static void tmio_mmc_finish_request(struct tmio_mmc_host *host)
274 {
275         struct mmc_request *mrq;
276         unsigned long flags;
277
278         spin_lock_irqsave(&host->lock, flags);
279
280         mrq = host->mrq;
281         if (IS_ERR_OR_NULL(mrq)) {
282                 spin_unlock_irqrestore(&host->lock, flags);
283                 return;
284         }
285
286         host->cmd = NULL;
287         host->data = NULL;
288         host->force_pio = false;
289
290         cancel_delayed_work(&host->delayed_reset_work);
291
292         host->mrq = NULL;
293         spin_unlock_irqrestore(&host->lock, flags);
294
295         if (mrq->cmd->error || (mrq->data && mrq->data->error))
296                 tmio_mmc_abort_dma(host);
297
298         mmc_request_done(host->mmc, mrq);
299
300         pm_runtime_mark_last_busy(mmc_dev(host->mmc));
301         pm_runtime_put_autosuspend(mmc_dev(host->mmc));
302 }
303
304 static void tmio_mmc_done_work(struct work_struct *work)
305 {
306         struct tmio_mmc_host *host = container_of(work, struct tmio_mmc_host,
307                                                   done);
308         tmio_mmc_finish_request(host);
309 }
310
311 /* These are the bitmasks the tmio chip requires to implement the MMC response
312  * types. Note that R1 and R6 are the same in this scheme. */
313 #define APP_CMD        0x0040
314 #define RESP_NONE      0x0300
315 #define RESP_R1        0x0400
316 #define RESP_R1B       0x0500
317 #define RESP_R2        0x0600
318 #define RESP_R3        0x0700
319 #define DATA_PRESENT   0x0800
320 #define TRANSFER_READ  0x1000
321 #define TRANSFER_MULTI 0x2000
322 #define SECURITY_CMD   0x4000
323 #define NO_CMD12_ISSUE 0x4000 /* TMIO_MMC_HAVE_CMD12_CTRL */
324
325 static int tmio_mmc_start_command(struct tmio_mmc_host *host, struct mmc_command *cmd)
326 {
327         struct mmc_data *data = host->data;
328         int c = cmd->opcode;
329         u32 irq_mask = TMIO_MASK_CMD;
330
331         /* CMD12 is handled by hardware */
332         if (cmd->opcode == MMC_STOP_TRANSMISSION && !cmd->arg) {
333                 sd_ctrl_write16(host, CTL_STOP_INTERNAL_ACTION, 0x001);
334                 return 0;
335         }
336
337         switch (mmc_resp_type(cmd)) {
338         case MMC_RSP_NONE: c |= RESP_NONE; break;
339         case MMC_RSP_R1:   c |= RESP_R1;   break;
340         case MMC_RSP_R1B:  c |= RESP_R1B;  break;
341         case MMC_RSP_R2:   c |= RESP_R2;   break;
342         case MMC_RSP_R3:   c |= RESP_R3;   break;
343         default:
344                 pr_debug("Unknown response type %d\n", mmc_resp_type(cmd));
345                 return -EINVAL;
346         }
347
348         host->cmd = cmd;
349
350 /* FIXME - this seems to be ok commented out but the spec suggest this bit
351  *         should be set when issuing app commands.
352  *      if(cmd->flags & MMC_FLAG_ACMD)
353  *              c |= APP_CMD;
354  */
355         if (data) {
356                 c |= DATA_PRESENT;
357                 if (data->blocks > 1) {
358                         sd_ctrl_write16(host, CTL_STOP_INTERNAL_ACTION, 0x100);
359                         c |= TRANSFER_MULTI;
360
361                         /*
362                          * Disable auto CMD12 at IO_RW_EXTENDED when
363                          * multiple block transfer
364                          */
365                         if ((host->pdata->flags & TMIO_MMC_HAVE_CMD12_CTRL) &&
366                             (cmd->opcode == SD_IO_RW_EXTENDED))
367                                 c |= NO_CMD12_ISSUE;
368                 }
369                 if (data->flags & MMC_DATA_READ)
370                         c |= TRANSFER_READ;
371         }
372
373         if (!host->native_hotplug)
374                 irq_mask &= ~(TMIO_STAT_CARD_REMOVE | TMIO_STAT_CARD_INSERT);
375         tmio_mmc_enable_mmc_irqs(host, irq_mask);
376
377         /* Fire off the command */
378         sd_ctrl_write32(host, CTL_ARG_REG, cmd->arg);
379         sd_ctrl_write16(host, CTL_SD_CMD, c);
380
381         return 0;
382 }
383
384 static void tmio_mmc_transfer_data(struct tmio_mmc_host *host,
385                                    unsigned short *buf,
386                                    unsigned int count)
387 {
388         int is_read = host->data->flags & MMC_DATA_READ;
389         u8  *buf8;
390
391         /*
392          * Transfer the data
393          */
394         if (is_read)
395                 sd_ctrl_read16_rep(host, CTL_SD_DATA_PORT, buf, count >> 1);
396         else
397                 sd_ctrl_write16_rep(host, CTL_SD_DATA_PORT, buf, count >> 1);
398
399         /* if count was even number */
400         if (!(count & 0x1))
401                 return;
402
403         /* if count was odd number */
404         buf8 = (u8 *)(buf + (count >> 1));
405
406         /*
407          * FIXME
408          *
409          * driver and this function are assuming that
410          * it is used as little endian
411          */
412         if (is_read)
413                 *buf8 = sd_ctrl_read16(host, CTL_SD_DATA_PORT) & 0xff;
414         else
415                 sd_ctrl_write16(host, CTL_SD_DATA_PORT, *buf8);
416 }
417
418 /*
419  * This chip always returns (at least?) as much data as you ask for.
420  * I'm unsure what happens if you ask for less than a block. This should be
421  * looked into to ensure that a funny length read doesn't hose the controller.
422  */
423 static void tmio_mmc_pio_irq(struct tmio_mmc_host *host)
424 {
425         struct mmc_data *data = host->data;
426         void *sg_virt;
427         unsigned short *buf;
428         unsigned int count;
429         unsigned long flags;
430
431         if ((host->chan_tx || host->chan_rx) && !host->force_pio) {
432                 pr_err("PIO IRQ in DMA mode!\n");
433                 return;
434         } else if (!data) {
435                 pr_debug("Spurious PIO IRQ\n");
436                 return;
437         }
438
439         sg_virt = tmio_mmc_kmap_atomic(host->sg_ptr, &flags);
440         buf = (unsigned short *)(sg_virt + host->sg_off);
441
442         count = host->sg_ptr->length - host->sg_off;
443         if (count > data->blksz)
444                 count = data->blksz;
445
446         pr_debug("count: %08x offset: %08x flags %08x\n",
447                  count, host->sg_off, data->flags);
448
449         /* Transfer the data */
450         tmio_mmc_transfer_data(host, buf, count);
451
452         host->sg_off += count;
453
454         tmio_mmc_kunmap_atomic(host->sg_ptr, &flags, sg_virt);
455
456         if (host->sg_off == host->sg_ptr->length)
457                 tmio_mmc_next_sg(host);
458
459         return;
460 }
461
462 static void tmio_mmc_check_bounce_buffer(struct tmio_mmc_host *host)
463 {
464         if (host->sg_ptr == &host->bounce_sg) {
465                 unsigned long flags;
466                 void *sg_vaddr = tmio_mmc_kmap_atomic(host->sg_orig, &flags);
467                 memcpy(sg_vaddr, host->bounce_buf, host->bounce_sg.length);
468                 tmio_mmc_kunmap_atomic(host->sg_orig, &flags, sg_vaddr);
469         }
470 }
471
472 /* needs to be called with host->lock held */
473 void tmio_mmc_do_data_irq(struct tmio_mmc_host *host)
474 {
475         struct mmc_data *data = host->data;
476         struct mmc_command *stop;
477
478         host->data = NULL;
479
480         if (!data) {
481                 dev_warn(&host->pdev->dev, "Spurious data end IRQ\n");
482                 return;
483         }
484         stop = data->stop;
485
486         /* FIXME - return correct transfer count on errors */
487         if (!data->error)
488                 data->bytes_xfered = data->blocks * data->blksz;
489         else
490                 data->bytes_xfered = 0;
491
492         pr_debug("Completed data request\n");
493
494         /*
495          * FIXME: other drivers allow an optional stop command of any given type
496          *        which we dont do, as the chip can auto generate them.
497          *        Perhaps we can be smarter about when to use auto CMD12 and
498          *        only issue the auto request when we know this is the desired
499          *        stop command, allowing fallback to the stop command the
500          *        upper layers expect. For now, we do what works.
501          */
502
503         if (data->flags & MMC_DATA_READ) {
504                 if (host->chan_rx && !host->force_pio)
505                         tmio_mmc_check_bounce_buffer(host);
506                 dev_dbg(&host->pdev->dev, "Complete Rx request %p\n",
507                         host->mrq);
508         } else {
509                 dev_dbg(&host->pdev->dev, "Complete Tx request %p\n",
510                         host->mrq);
511         }
512
513         if (stop) {
514                 if (stop->opcode == MMC_STOP_TRANSMISSION && !stop->arg)
515                         sd_ctrl_write16(host, CTL_STOP_INTERNAL_ACTION, 0x000);
516                 else
517                         BUG();
518         }
519
520         schedule_work(&host->done);
521 }
522
523 static void tmio_mmc_data_irq(struct tmio_mmc_host *host)
524 {
525         struct mmc_data *data;
526         spin_lock(&host->lock);
527         data = host->data;
528
529         if (!data)
530                 goto out;
531
532         if (host->chan_tx && (data->flags & MMC_DATA_WRITE) && !host->force_pio) {
533                 u32 status = sd_ctrl_read32(host, CTL_STATUS);
534                 bool done = false;
535
536                 /*
537                  * Has all data been written out yet? Testing on SuperH showed,
538                  * that in most cases the first interrupt comes already with the
539                  * BUSY status bit clear, but on some operations, like mount or
540                  * in the beginning of a write / sync / umount, there is one
541                  * DATAEND interrupt with the BUSY bit set, in this cases
542                  * waiting for one more interrupt fixes the problem.
543                  */
544                 if (host->pdata->flags & TMIO_MMC_HAS_IDLE_WAIT) {
545                         if (status & TMIO_STAT_ILL_FUNC)
546                                 done = true;
547                 } else {
548                         if (!(status & TMIO_STAT_CMD_BUSY))
549                                 done = true;
550                 }
551
552                 if (done) {
553                         tmio_mmc_disable_mmc_irqs(host, TMIO_STAT_DATAEND);
554                         tasklet_schedule(&host->dma_complete);
555                 }
556         } else if (host->chan_rx && (data->flags & MMC_DATA_READ) && !host->force_pio) {
557                 tmio_mmc_disable_mmc_irqs(host, TMIO_STAT_DATAEND);
558                 tasklet_schedule(&host->dma_complete);
559         } else {
560                 tmio_mmc_do_data_irq(host);
561                 tmio_mmc_disable_mmc_irqs(host, TMIO_MASK_READOP | TMIO_MASK_WRITEOP);
562         }
563 out:
564         spin_unlock(&host->lock);
565 }
566
567 static void tmio_mmc_cmd_irq(struct tmio_mmc_host *host,
568         unsigned int stat)
569 {
570         struct mmc_command *cmd = host->cmd;
571         int i, addr;
572
573         spin_lock(&host->lock);
574
575         if (!host->cmd) {
576                 pr_debug("Spurious CMD irq\n");
577                 goto out;
578         }
579
580         host->cmd = NULL;
581
582         /* This controller is sicker than the PXA one. Not only do we need to
583          * drop the top 8 bits of the first response word, we also need to
584          * modify the order of the response for short response command types.
585          */
586
587         for (i = 3, addr = CTL_RESPONSE ; i >= 0 ; i--, addr += 4)
588                 cmd->resp[i] = sd_ctrl_read32(host, addr);
589
590         if (cmd->flags &  MMC_RSP_136) {
591                 cmd->resp[0] = (cmd->resp[0] << 8) | (cmd->resp[1] >> 24);
592                 cmd->resp[1] = (cmd->resp[1] << 8) | (cmd->resp[2] >> 24);
593                 cmd->resp[2] = (cmd->resp[2] << 8) | (cmd->resp[3] >> 24);
594                 cmd->resp[3] <<= 8;
595         } else if (cmd->flags & MMC_RSP_R3) {
596                 cmd->resp[0] = cmd->resp[3];
597         }
598
599         if (stat & TMIO_STAT_CMDTIMEOUT)
600                 cmd->error = -ETIMEDOUT;
601         else if (stat & TMIO_STAT_CRCFAIL && cmd->flags & MMC_RSP_CRC)
602                 cmd->error = -EILSEQ;
603
604         /* If there is data to handle we enable data IRQs here, and
605          * we will ultimatley finish the request in the data_end handler.
606          * If theres no data or we encountered an error, finish now.
607          */
608         if (host->data && !cmd->error) {
609                 if (host->data->flags & MMC_DATA_READ) {
610                         if (host->force_pio || !host->chan_rx)
611                                 tmio_mmc_enable_mmc_irqs(host, TMIO_MASK_READOP);
612                         else
613                                 tasklet_schedule(&host->dma_issue);
614                 } else {
615                         if (host->force_pio || !host->chan_tx)
616                                 tmio_mmc_enable_mmc_irqs(host, TMIO_MASK_WRITEOP);
617                         else
618                                 tasklet_schedule(&host->dma_issue);
619                 }
620         } else {
621                 schedule_work(&host->done);
622         }
623
624 out:
625         spin_unlock(&host->lock);
626 }
627
628 static void tmio_mmc_card_irq_status(struct tmio_mmc_host *host,
629                                        int *ireg, int *status)
630 {
631         *status = sd_ctrl_read32(host, CTL_STATUS);
632         *ireg = *status & TMIO_MASK_IRQ & ~host->sdcard_irq_mask;
633
634         pr_debug_status(*status);
635         pr_debug_status(*ireg);
636
637         /* Clear the status except the interrupt status */
638         sd_ctrl_write32(host, CTL_STATUS, TMIO_MASK_IRQ);
639 }
640
641 static bool __tmio_mmc_card_detect_irq(struct tmio_mmc_host *host,
642                                       int ireg, int status)
643 {
644         struct mmc_host *mmc = host->mmc;
645
646         /* Card insert / remove attempts */
647         if (ireg & (TMIO_STAT_CARD_INSERT | TMIO_STAT_CARD_REMOVE)) {
648                 tmio_mmc_ack_mmc_irqs(host, TMIO_STAT_CARD_INSERT |
649                         TMIO_STAT_CARD_REMOVE);
650                 if ((((ireg & TMIO_STAT_CARD_REMOVE) && mmc->card) ||
651                      ((ireg & TMIO_STAT_CARD_INSERT) && !mmc->card)) &&
652                     !work_pending(&mmc->detect.work))
653                         mmc_detect_change(host->mmc, msecs_to_jiffies(100));
654                 return true;
655         }
656
657         return false;
658 }
659
660 irqreturn_t tmio_mmc_card_detect_irq(int irq, void *devid)
661 {
662         unsigned int ireg, status;
663         struct tmio_mmc_host *host = devid;
664
665         tmio_mmc_card_irq_status(host, &ireg, &status);
666         __tmio_mmc_card_detect_irq(host, ireg, status);
667
668         return IRQ_HANDLED;
669 }
670 EXPORT_SYMBOL(tmio_mmc_card_detect_irq);
671
672 static bool __tmio_mmc_sdcard_irq(struct tmio_mmc_host *host,
673                                  int ireg, int status)
674 {
675         /* Command completion */
676         if (ireg & (TMIO_STAT_CMDRESPEND | TMIO_STAT_CMDTIMEOUT)) {
677                 tmio_mmc_ack_mmc_irqs(host,
678                              TMIO_STAT_CMDRESPEND |
679                              TMIO_STAT_CMDTIMEOUT);
680                 tmio_mmc_cmd_irq(host, status);
681                 return true;
682         }
683
684         /* Data transfer */
685         if (ireg & (TMIO_STAT_RXRDY | TMIO_STAT_TXRQ)) {
686                 tmio_mmc_ack_mmc_irqs(host, TMIO_STAT_RXRDY | TMIO_STAT_TXRQ);
687                 tmio_mmc_pio_irq(host);
688                 return true;
689         }
690
691         /* Data transfer completion */
692         if (ireg & TMIO_STAT_DATAEND) {
693                 tmio_mmc_ack_mmc_irqs(host, TMIO_STAT_DATAEND);
694                 tmio_mmc_data_irq(host);
695                 return true;
696         }
697
698         return false;
699 }
700
701 irqreturn_t tmio_mmc_sdcard_irq(int irq, void *devid)
702 {
703         unsigned int ireg, status;
704         struct tmio_mmc_host *host = devid;
705
706         tmio_mmc_card_irq_status(host, &ireg, &status);
707         __tmio_mmc_sdcard_irq(host, ireg, status);
708
709         return IRQ_HANDLED;
710 }
711 EXPORT_SYMBOL(tmio_mmc_sdcard_irq);
712
713 irqreturn_t tmio_mmc_sdio_irq(int irq, void *devid)
714 {
715         struct tmio_mmc_host *host = devid;
716         struct mmc_host *mmc = host->mmc;
717         struct tmio_mmc_data *pdata = host->pdata;
718         unsigned int ireg, status;
719         unsigned int sdio_status;
720
721         if (!(pdata->flags & TMIO_MMC_SDIO_IRQ))
722                 return IRQ_HANDLED;
723
724         status = sd_ctrl_read16(host, CTL_SDIO_STATUS);
725         ireg = status & TMIO_SDIO_MASK_ALL & ~host->sdcard_irq_mask;
726
727         sdio_status = status & ~TMIO_SDIO_MASK_ALL;
728         if (pdata->flags & TMIO_MMC_SDIO_STATUS_QUIRK)
729                 sdio_status |= 6;
730
731         sd_ctrl_write16(host, CTL_SDIO_STATUS, sdio_status);
732
733         if (mmc->caps & MMC_CAP_SDIO_IRQ && ireg & TMIO_SDIO_STAT_IOIRQ)
734                 mmc_signal_sdio_irq(mmc);
735
736         return IRQ_HANDLED;
737 }
738 EXPORT_SYMBOL(tmio_mmc_sdio_irq);
739
740 irqreturn_t tmio_mmc_irq(int irq, void *devid)
741 {
742         struct tmio_mmc_host *host = devid;
743         unsigned int ireg, status;
744
745         pr_debug("MMC IRQ begin\n");
746
747         tmio_mmc_card_irq_status(host, &ireg, &status);
748         if (__tmio_mmc_card_detect_irq(host, ireg, status))
749                 return IRQ_HANDLED;
750         if (__tmio_mmc_sdcard_irq(host, ireg, status))
751                 return IRQ_HANDLED;
752
753         tmio_mmc_sdio_irq(irq, devid);
754
755         return IRQ_HANDLED;
756 }
757 EXPORT_SYMBOL(tmio_mmc_irq);
758
759 static int tmio_mmc_start_data(struct tmio_mmc_host *host,
760         struct mmc_data *data)
761 {
762         struct tmio_mmc_data *pdata = host->pdata;
763
764         pr_debug("setup data transfer: blocksize %08x  nr_blocks %d\n",
765                  data->blksz, data->blocks);
766
767         /* Some hardware cannot perform 2 byte requests in 4 bit mode */
768         if (host->mmc->ios.bus_width == MMC_BUS_WIDTH_4) {
769                 int blksz_2bytes = pdata->flags & TMIO_MMC_BLKSZ_2BYTES;
770
771                 if (data->blksz < 2 || (data->blksz < 4 && !blksz_2bytes)) {
772                         pr_err("%s: %d byte block unsupported in 4 bit mode\n",
773                                mmc_hostname(host->mmc), data->blksz);
774                         return -EINVAL;
775                 }
776         }
777
778         tmio_mmc_init_sg(host, data);
779         host->data = data;
780
781         /* Set transfer length / blocksize */
782         sd_ctrl_write16(host, CTL_SD_XFER_LEN, data->blksz);
783         sd_ctrl_write16(host, CTL_XFER_BLK_COUNT, data->blocks);
784
785         tmio_mmc_start_dma(host, data);
786
787         return 0;
788 }
789
790 /* Process requests from the MMC layer */
791 static void tmio_mmc_request(struct mmc_host *mmc, struct mmc_request *mrq)
792 {
793         struct tmio_mmc_host *host = mmc_priv(mmc);
794         unsigned long flags;
795         int ret;
796
797         spin_lock_irqsave(&host->lock, flags);
798
799         if (host->mrq) {
800                 pr_debug("request not null\n");
801                 if (IS_ERR(host->mrq)) {
802                         spin_unlock_irqrestore(&host->lock, flags);
803                         mrq->cmd->error = -EAGAIN;
804                         mmc_request_done(mmc, mrq);
805                         return;
806                 }
807         }
808
809         host->last_req_ts = jiffies;
810         wmb();
811         host->mrq = mrq;
812
813         spin_unlock_irqrestore(&host->lock, flags);
814
815         pm_runtime_get_sync(mmc_dev(mmc));
816
817         if (mrq->data) {
818                 ret = tmio_mmc_start_data(host, mrq->data);
819                 if (ret)
820                         goto fail;
821         }
822
823         ret = tmio_mmc_start_command(host, mrq->cmd);
824         if (!ret) {
825                 schedule_delayed_work(&host->delayed_reset_work,
826                                       msecs_to_jiffies(CMDREQ_TIMEOUT));
827                 return;
828         }
829
830 fail:
831         host->force_pio = false;
832         host->mrq = NULL;
833         mrq->cmd->error = ret;
834         mmc_request_done(mmc, mrq);
835
836         pm_runtime_mark_last_busy(mmc_dev(mmc));
837         pm_runtime_put_autosuspend(mmc_dev(mmc));
838 }
839
840 static int tmio_mmc_clk_update(struct tmio_mmc_host *host)
841 {
842         struct mmc_host *mmc = host->mmc;
843         int ret;
844
845         if (!host->clk_enable)
846                 return -ENOTSUPP;
847
848         ret = host->clk_enable(host->pdev, &mmc->f_max);
849         if (!ret)
850                 mmc->f_min = mmc->f_max / 512;
851
852         return ret;
853 }
854
855 static void tmio_mmc_power_on(struct tmio_mmc_host *host, unsigned short vdd)
856 {
857         struct mmc_host *mmc = host->mmc;
858         int ret = 0;
859
860         /* .set_ios() is returning void, so, no chance to report an error */
861
862         if (host->set_pwr)
863                 host->set_pwr(host->pdev, 1);
864
865         if (!IS_ERR(mmc->supply.vmmc)) {
866                 ret = mmc_regulator_set_ocr(mmc, mmc->supply.vmmc, vdd);
867                 /*
868                  * Attention: empiric value. With a b43 WiFi SDIO card this
869                  * delay proved necessary for reliable card-insertion probing.
870                  * 100us were not enough. Is this the same 140us delay, as in
871                  * tmio_mmc_set_ios()?
872                  */
873                 udelay(200);
874         }
875         /*
876          * It seems, VccQ should be switched on after Vcc, this is also what the
877          * omap_hsmmc.c driver does.
878          */
879         if (!IS_ERR(mmc->supply.vqmmc) && !ret) {
880                 ret = regulator_enable(mmc->supply.vqmmc);
881                 udelay(200);
882         }
883
884         if (ret < 0)
885                 dev_dbg(&host->pdev->dev, "Regulators failed to power up: %d\n",
886                         ret);
887 }
888
889 static void tmio_mmc_power_off(struct tmio_mmc_host *host)
890 {
891         struct mmc_host *mmc = host->mmc;
892
893         if (!IS_ERR(mmc->supply.vqmmc))
894                 regulator_disable(mmc->supply.vqmmc);
895
896         if (!IS_ERR(mmc->supply.vmmc))
897                 mmc_regulator_set_ocr(mmc, mmc->supply.vmmc, 0);
898
899         if (host->set_pwr)
900                 host->set_pwr(host->pdev, 0);
901 }
902
903 static void tmio_mmc_set_bus_width(struct tmio_mmc_host *host,
904                                 unsigned char bus_width)
905 {
906         switch (bus_width) {
907         case MMC_BUS_WIDTH_1:
908                 sd_ctrl_write16(host, CTL_SD_MEM_CARD_OPT, 0x80e0);
909                 break;
910         case MMC_BUS_WIDTH_4:
911                 sd_ctrl_write16(host, CTL_SD_MEM_CARD_OPT, 0x00e0);
912                 break;
913         }
914 }
915
916 /* Set MMC clock / power.
917  * Note: This controller uses a simple divider scheme therefore it cannot
918  * run a MMC card at full speed (20MHz). The max clock is 24MHz on SD, but as
919  * MMC wont run that fast, it has to be clocked at 12MHz which is the next
920  * slowest setting.
921  */
922 static void tmio_mmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
923 {
924         struct tmio_mmc_host *host = mmc_priv(mmc);
925         struct device *dev = &host->pdev->dev;
926         unsigned long flags;
927
928         pm_runtime_get_sync(mmc_dev(mmc));
929
930         mutex_lock(&host->ios_lock);
931
932         spin_lock_irqsave(&host->lock, flags);
933         if (host->mrq) {
934                 if (IS_ERR(host->mrq)) {
935                         dev_dbg(dev,
936                                 "%s.%d: concurrent .set_ios(), clk %u, mode %u\n",
937                                 current->comm, task_pid_nr(current),
938                                 ios->clock, ios->power_mode);
939                         host->mrq = ERR_PTR(-EINTR);
940                 } else {
941                         dev_dbg(dev,
942                                 "%s.%d: CMD%u active since %lu, now %lu!\n",
943                                 current->comm, task_pid_nr(current),
944                                 host->mrq->cmd->opcode, host->last_req_ts, jiffies);
945                 }
946                 spin_unlock_irqrestore(&host->lock, flags);
947
948                 mutex_unlock(&host->ios_lock);
949                 return;
950         }
951
952         host->mrq = ERR_PTR(-EBUSY);
953
954         spin_unlock_irqrestore(&host->lock, flags);
955
956         switch (ios->power_mode) {
957         case MMC_POWER_OFF:
958                 tmio_mmc_power_off(host);
959                 tmio_mmc_clk_stop(host);
960                 break;
961         case MMC_POWER_UP:
962                 tmio_mmc_set_clock(host, ios->clock);
963                 tmio_mmc_power_on(host, ios->vdd);
964                 tmio_mmc_clk_start(host);
965                 tmio_mmc_set_bus_width(host, ios->bus_width);
966                 break;
967         case MMC_POWER_ON:
968                 tmio_mmc_set_clock(host, ios->clock);
969                 tmio_mmc_clk_start(host);
970                 tmio_mmc_set_bus_width(host, ios->bus_width);
971                 break;
972         }
973
974         /* Let things settle. delay taken from winCE driver */
975         udelay(140);
976         if (PTR_ERR(host->mrq) == -EINTR)
977                 dev_dbg(&host->pdev->dev,
978                         "%s.%d: IOS interrupted: clk %u, mode %u",
979                         current->comm, task_pid_nr(current),
980                         ios->clock, ios->power_mode);
981         host->mrq = NULL;
982
983         host->clk_cache = ios->clock;
984
985         mutex_unlock(&host->ios_lock);
986
987         pm_runtime_mark_last_busy(mmc_dev(mmc));
988         pm_runtime_put_autosuspend(mmc_dev(mmc));
989 }
990
991 static int tmio_mmc_get_ro(struct mmc_host *mmc)
992 {
993         struct tmio_mmc_host *host = mmc_priv(mmc);
994         struct tmio_mmc_data *pdata = host->pdata;
995         int ret = mmc_gpio_get_ro(mmc);
996         if (ret >= 0)
997                 return ret;
998
999         pm_runtime_get_sync(mmc_dev(mmc));
1000         ret = !((pdata->flags & TMIO_MMC_WRPROTECT_DISABLE) ||
1001                 (sd_ctrl_read32(host, CTL_STATUS) & TMIO_STAT_WRPROTECT));
1002         pm_runtime_mark_last_busy(mmc_dev(mmc));
1003         pm_runtime_put_autosuspend(mmc_dev(mmc));
1004
1005         return ret;
1006 }
1007
1008 static int tmio_multi_io_quirk(struct mmc_card *card,
1009                                unsigned int direction, int blk_size)
1010 {
1011         struct tmio_mmc_host *host = mmc_priv(card->host);
1012
1013         if (host->multi_io_quirk)
1014                 return host->multi_io_quirk(card, direction, blk_size);
1015
1016         return blk_size;
1017 }
1018
1019 static const struct mmc_host_ops tmio_mmc_ops = {
1020         .request        = tmio_mmc_request,
1021         .set_ios        = tmio_mmc_set_ios,
1022         .get_ro         = tmio_mmc_get_ro,
1023         .get_cd         = mmc_gpio_get_cd,
1024         .enable_sdio_irq = tmio_mmc_enable_sdio_irq,
1025         .multi_io_quirk = tmio_multi_io_quirk,
1026 };
1027
1028 static int tmio_mmc_init_ocr(struct tmio_mmc_host *host)
1029 {
1030         struct tmio_mmc_data *pdata = host->pdata;
1031         struct mmc_host *mmc = host->mmc;
1032
1033         mmc_regulator_get_supply(mmc);
1034
1035         /* use ocr_mask if no regulator */
1036         if (!mmc->ocr_avail)
1037                 mmc->ocr_avail =  pdata->ocr_mask;
1038
1039         /*
1040          * try again.
1041          * There is possibility that regulator has not been probed
1042          */
1043         if (!mmc->ocr_avail)
1044                 return -EPROBE_DEFER;
1045
1046         return 0;
1047 }
1048
1049 static void tmio_mmc_of_parse(struct platform_device *pdev,
1050                               struct tmio_mmc_data *pdata)
1051 {
1052         const struct device_node *np = pdev->dev.of_node;
1053         if (!np)
1054                 return;
1055
1056         if (of_get_property(np, "toshiba,mmc-wrprotect-disable", NULL))
1057                 pdata->flags |= TMIO_MMC_WRPROTECT_DISABLE;
1058 }
1059
1060 struct tmio_mmc_host*
1061 tmio_mmc_host_alloc(struct platform_device *pdev)
1062 {
1063         struct tmio_mmc_host *host;
1064         struct mmc_host *mmc;
1065
1066         mmc = mmc_alloc_host(sizeof(struct tmio_mmc_host), &pdev->dev);
1067         if (!mmc)
1068                 return NULL;
1069
1070         host = mmc_priv(mmc);
1071         host->mmc = mmc;
1072         host->pdev = pdev;
1073
1074         return host;
1075 }
1076 EXPORT_SYMBOL(tmio_mmc_host_alloc);
1077
1078 void tmio_mmc_host_free(struct tmio_mmc_host *host)
1079 {
1080         mmc_free_host(host->mmc);
1081 }
1082 EXPORT_SYMBOL(tmio_mmc_host_free);
1083
1084 int tmio_mmc_host_probe(struct tmio_mmc_host *_host,
1085                         struct tmio_mmc_data *pdata)
1086 {
1087         struct platform_device *pdev = _host->pdev;
1088         struct mmc_host *mmc = _host->mmc;
1089         struct resource *res_ctl;
1090         int ret;
1091         u32 irq_mask = TMIO_MASK_CMD;
1092
1093         tmio_mmc_of_parse(pdev, pdata);
1094
1095         if (!(pdata->flags & TMIO_MMC_HAS_IDLE_WAIT))
1096                 _host->write16_hook = NULL;
1097
1098         res_ctl = platform_get_resource(pdev, IORESOURCE_MEM, 0);
1099         if (!res_ctl)
1100                 return -EINVAL;
1101
1102         ret = mmc_of_parse(mmc);
1103         if (ret < 0)
1104                 goto host_free;
1105
1106         _host->pdata = pdata;
1107         platform_set_drvdata(pdev, mmc);
1108
1109         _host->set_pwr = pdata->set_pwr;
1110         _host->set_clk_div = pdata->set_clk_div;
1111
1112         ret = tmio_mmc_init_ocr(_host);
1113         if (ret < 0)
1114                 goto host_free;
1115
1116         _host->ctl = devm_ioremap(&pdev->dev,
1117                                   res_ctl->start, resource_size(res_ctl));
1118         if (!_host->ctl) {
1119                 ret = -ENOMEM;
1120                 goto host_free;
1121         }
1122
1123         mmc->ops = &tmio_mmc_ops;
1124         mmc->caps |= MMC_CAP_4_BIT_DATA | pdata->capabilities;
1125         mmc->caps2 |= pdata->capabilities2;
1126         mmc->max_segs = 32;
1127         mmc->max_blk_size = 512;
1128         mmc->max_blk_count = (PAGE_SIZE / mmc->max_blk_size) *
1129                 mmc->max_segs;
1130         mmc->max_req_size = mmc->max_blk_size * mmc->max_blk_count;
1131         mmc->max_seg_size = mmc->max_req_size;
1132
1133         _host->native_hotplug = !(pdata->flags & TMIO_MMC_USE_GPIO_CD ||
1134                                   mmc->caps & MMC_CAP_NEEDS_POLL ||
1135                                   mmc->caps & MMC_CAP_NONREMOVABLE ||
1136                                   mmc->slot.cd_irq >= 0);
1137
1138         if (tmio_mmc_clk_update(_host) < 0) {
1139                 mmc->f_max = pdata->hclk;
1140                 mmc->f_min = mmc->f_max / 512;
1141         }
1142
1143         /*
1144          * Check the sanity of mmc->f_min to prevent tmio_mmc_set_clock() from
1145          * looping forever...
1146          */
1147         if (mmc->f_min == 0) {
1148                 ret = -EINVAL;
1149                 goto host_free;
1150         }
1151
1152         /*
1153          * While using internal tmio hardware logic for card detection, we need
1154          * to ensure it stays powered for it to work.
1155          */
1156         if (_host->native_hotplug)
1157                 pm_runtime_get_noresume(&pdev->dev);
1158
1159         tmio_mmc_clk_stop(_host);
1160         tmio_mmc_reset(_host);
1161
1162         _host->sdcard_irq_mask = sd_ctrl_read32(_host, CTL_IRQ_MASK);
1163         tmio_mmc_disable_mmc_irqs(_host, TMIO_MASK_ALL);
1164
1165         /* Unmask the IRQs we want to know about */
1166         if (!_host->chan_rx)
1167                 irq_mask |= TMIO_MASK_READOP;
1168         if (!_host->chan_tx)
1169                 irq_mask |= TMIO_MASK_WRITEOP;
1170         if (!_host->native_hotplug)
1171                 irq_mask &= ~(TMIO_STAT_CARD_REMOVE | TMIO_STAT_CARD_INSERT);
1172
1173         _host->sdcard_irq_mask &= ~irq_mask;
1174
1175         _host->sdio_irq_enabled = false;
1176         if (pdata->flags & TMIO_MMC_SDIO_IRQ) {
1177                 _host->sdio_irq_mask = TMIO_SDIO_MASK_ALL;
1178                 sd_ctrl_write16(_host, CTL_SDIO_IRQ_MASK, _host->sdio_irq_mask);
1179                 sd_ctrl_write16(_host, CTL_TRANSACTION_CTL, 0x0000);
1180         }
1181
1182         spin_lock_init(&_host->lock);
1183         mutex_init(&_host->ios_lock);
1184
1185         /* Init delayed work for request timeouts */
1186         INIT_DELAYED_WORK(&_host->delayed_reset_work, tmio_mmc_reset_work);
1187         INIT_WORK(&_host->done, tmio_mmc_done_work);
1188
1189         /* See if we also get DMA */
1190         tmio_mmc_request_dma(_host, pdata);
1191
1192         pm_runtime_set_active(&pdev->dev);
1193         pm_runtime_set_autosuspend_delay(&pdev->dev, 50);
1194         pm_runtime_use_autosuspend(&pdev->dev);
1195         pm_runtime_enable(&pdev->dev);
1196
1197         ret = mmc_add_host(mmc);
1198         if (ret < 0) {
1199                 tmio_mmc_host_remove(_host);
1200                 return ret;
1201         }
1202
1203         dev_pm_qos_expose_latency_limit(&pdev->dev, 100);
1204
1205         if (pdata->flags & TMIO_MMC_USE_GPIO_CD) {
1206                 ret = mmc_gpio_request_cd(mmc, pdata->cd_gpio, 0);
1207                 if (ret < 0) {
1208                         tmio_mmc_host_remove(_host);
1209                         return ret;
1210                 }
1211                 mmc_gpiod_request_cd_irq(mmc);
1212         }
1213
1214         return 0;
1215
1216 host_free:
1217
1218         return ret;
1219 }
1220 EXPORT_SYMBOL(tmio_mmc_host_probe);
1221
1222 void tmio_mmc_host_remove(struct tmio_mmc_host *host)
1223 {
1224         struct platform_device *pdev = host->pdev;
1225         struct mmc_host *mmc = host->mmc;
1226
1227         if (!host->native_hotplug)
1228                 pm_runtime_get_sync(&pdev->dev);
1229
1230         dev_pm_qos_hide_latency_limit(&pdev->dev);
1231
1232         mmc_remove_host(mmc);
1233         cancel_work_sync(&host->done);
1234         cancel_delayed_work_sync(&host->delayed_reset_work);
1235         tmio_mmc_release_dma(host);
1236
1237         pm_runtime_put_sync(&pdev->dev);
1238         pm_runtime_disable(&pdev->dev);
1239 }
1240 EXPORT_SYMBOL(tmio_mmc_host_remove);
1241
1242 #ifdef CONFIG_PM
1243 int tmio_mmc_host_runtime_suspend(struct device *dev)
1244 {
1245         struct mmc_host *mmc = dev_get_drvdata(dev);
1246         struct tmio_mmc_host *host = mmc_priv(mmc);
1247
1248         tmio_mmc_disable_mmc_irqs(host, TMIO_MASK_ALL);
1249
1250         if (host->clk_cache)
1251                 tmio_mmc_clk_stop(host);
1252
1253         if (host->clk_disable)
1254                 host->clk_disable(host->pdev);
1255
1256         return 0;
1257 }
1258 EXPORT_SYMBOL(tmio_mmc_host_runtime_suspend);
1259
1260 int tmio_mmc_host_runtime_resume(struct device *dev)
1261 {
1262         struct mmc_host *mmc = dev_get_drvdata(dev);
1263         struct tmio_mmc_host *host = mmc_priv(mmc);
1264
1265         tmio_mmc_reset(host);
1266         tmio_mmc_clk_update(host);
1267
1268         if (host->clk_cache) {
1269                 tmio_mmc_set_clock(host, host->clk_cache);
1270                 tmio_mmc_clk_start(host);
1271         }
1272
1273         tmio_mmc_enable_dma(host, true);
1274
1275         return 0;
1276 }
1277 EXPORT_SYMBOL(tmio_mmc_host_runtime_resume);
1278 #endif
1279
1280 MODULE_LICENSE("GPL v2");