cxgb4: Add support for ndo_get_vf_config

[cascardo/linux.git] / drivers / net / ethernet / chelsio / cxgb4 / cxgb4_main.c

/*
 * This file is part of the Chelsio T4 Ethernet driver for Linux.
 *
 * Copyright (c) 2003-2016 Chelsio Communications, Inc. All rights reserved.
 *
 * This software is available to you under a choice of one of two
 * licenses.  You may choose to be licensed under the terms of the GNU
 * General Public License (GPL) Version 2, available from the file
 * COPYING in the main directory of this source tree, or the
 * OpenIB.org BSD license below:
 *
 *     Redistribution and use in source and binary forms, with or
 *     without modification, are permitted provided that the following
 *     conditions are met:
 *
 *      - Redistributions of source code must retain the above
 *        copyright notice, this list of conditions and the following
 *        disclaimer.
 *
 *      - Redistributions in binary form must reproduce the above
 *        copyright notice, this list of conditions and the following
 *        disclaimer in the documentation and/or other materials
 *        provided with the distribution.
 *
 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
 * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
 * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
 * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
 * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
 * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
 * SOFTWARE.
 */

#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt

#include <linux/bitmap.h>
#include <linux/crc32.h>
#include <linux/ctype.h>
#include <linux/debugfs.h>
#include <linux/err.h>
#include <linux/etherdevice.h>
#include <linux/firmware.h>
#include <linux/if.h>
#include <linux/if_vlan.h>
#include <linux/init.h>
#include <linux/log2.h>
#include <linux/mdio.h>
#include <linux/module.h>
#include <linux/moduleparam.h>
#include <linux/mutex.h>
#include <linux/netdevice.h>
#include <linux/pci.h>
#include <linux/aer.h>
#include <linux/rtnetlink.h>
#include <linux/sched.h>
#include <linux/seq_file.h>
#include <linux/sockios.h>
#include <linux/vmalloc.h>
#include <linux/workqueue.h>
#include <net/neighbour.h>
#include <net/netevent.h>
#include <net/addrconf.h>
#include <net/bonding.h>
#include <net/addrconf.h>
#include <asm/uaccess.h>
#include <linux/crash_dump.h>

#include "cxgb4.h"
#include "t4_regs.h"
#include "t4_values.h"
#include "t4_msg.h"
#include "t4fw_api.h"
#include "t4fw_version.h"
#include "cxgb4_dcb.h"
#include "cxgb4_debugfs.h"
#include "clip_tbl.h"
#include "l2t.h"
#include "sched.h"

char cxgb4_driver_name[] = KBUILD_MODNAME;

#ifdef DRV_VERSION
#undef DRV_VERSION
#endif
#define DRV_VERSION "2.0.0-ko"
const char cxgb4_driver_version[] = DRV_VERSION;
#define DRV_DESC "Chelsio T4/T5/T6 Network Driver"

/* Host shadow copy of ingress filter entry.  This is in host native format
 * and doesn't match the ordering or bit order, etc. of the hardware of the
 * firmware command.  The use of bit-field structure elements is purely to
 * remind ourselves of the field size limitations and save memory in the case
 * where the filter table is large.
 */
struct filter_entry {
        /* Administrative fields for filter.
         */
        u32 valid:1;            /* filter allocated and valid */
        u32 locked:1;           /* filter is administratively locked */

        u32 pending:1;          /* filter action is pending firmware reply */
        u32 smtidx:8;           /* Source MAC Table index for smac */
        struct l2t_entry *l2t;  /* Layer Two Table entry for dmac */

        /* The filter itself.  Most of this is a straight copy of information
         * provided by the extended ioctl().  Some fields are translated to
         * internal forms -- for instance the Ingress Queue ID passed in from
         * the ioctl() is translated into the Absolute Ingress Queue ID.
         */
        struct ch_filter_specification fs;
};

#define DFLT_MSG_ENABLE (NETIF_MSG_DRV | NETIF_MSG_PROBE | NETIF_MSG_LINK | \
                         NETIF_MSG_TIMER | NETIF_MSG_IFDOWN | NETIF_MSG_IFUP |\
                         NETIF_MSG_RX_ERR | NETIF_MSG_TX_ERR)

/* Macros needed to support the PCI Device ID Table ...
 */
#define CH_PCI_DEVICE_ID_TABLE_DEFINE_BEGIN \
        static const struct pci_device_id cxgb4_pci_tbl[] = {
#define CH_PCI_DEVICE_ID_FUNCTION 0x4

/* Include PCI Device IDs for both PF4 and PF0-3 so our PCI probe() routine is
 * called for both.
 */
#define CH_PCI_DEVICE_ID_FUNCTION2 0x0

#define CH_PCI_ID_TABLE_ENTRY(devid) \
                {PCI_VDEVICE(CHELSIO, (devid)), 4}

#define CH_PCI_DEVICE_ID_TABLE_DEFINE_END \
                { 0, } \
        }

#include "t4_pci_id_tbl.h"

#define FW4_FNAME "cxgb4/t4fw.bin"
#define FW5_FNAME "cxgb4/t5fw.bin"
#define FW6_FNAME "cxgb4/t6fw.bin"
#define FW4_CFNAME "cxgb4/t4-config.txt"
#define FW5_CFNAME "cxgb4/t5-config.txt"
#define FW6_CFNAME "cxgb4/t6-config.txt"
#define PHY_AQ1202_FIRMWARE "cxgb4/aq1202_fw.cld"
#define PHY_BCM84834_FIRMWARE "cxgb4/bcm8483.bin"
#define PHY_AQ1202_DEVICEID 0x4409
#define PHY_BCM84834_DEVICEID 0x4486

MODULE_DESCRIPTION(DRV_DESC);
MODULE_AUTHOR("Chelsio Communications");
MODULE_LICENSE("Dual BSD/GPL");
MODULE_VERSION(DRV_VERSION);
MODULE_DEVICE_TABLE(pci, cxgb4_pci_tbl);
MODULE_FIRMWARE(FW4_FNAME);
MODULE_FIRMWARE(FW5_FNAME);
MODULE_FIRMWARE(FW6_FNAME);

/*
 * Normally we're willing to become the firmware's Master PF but will be happy
 * if another PF has already become the Master and initialized the adapter.
 * Setting "force_init" will cause this driver to forcibly establish itself as
 * the Master PF and initialize the adapter.
 */
static uint force_init;

module_param(force_init, uint, 0644);
MODULE_PARM_DESC(force_init, "Forcibly become Master PF and initialize adapter,"
                 "deprecated parameter");

static int dflt_msg_enable = DFLT_MSG_ENABLE;

module_param(dflt_msg_enable, int, 0644);
MODULE_PARM_DESC(dflt_msg_enable, "Chelsio T4 default message enable bitmap, "
                 "deprecated parameter");

/*
 * The driver uses the best interrupt scheme available on a platform in the
 * order MSI-X, MSI, legacy INTx interrupts.  This parameter determines which
 * of these schemes the driver may consider as follows:
 *
 * msi = 2: choose from among all three options
 * msi = 1: only consider MSI and INTx interrupts
 * msi = 0: force INTx interrupts
 */
static int msi = 2;

module_param(msi, int, 0644);
MODULE_PARM_DESC(msi, "whether to use INTx (0), MSI (1) or MSI-X (2)");

/*
 * Normally we tell the chip to deliver Ingress Packets into our DMA buffers
 * offset by 2 bytes in order to have the IP headers line up on 4-byte
 * boundaries.  This is a requirement for many architectures which will throw
 * a machine check fault if an attempt is made to access one of the 4-byte IP
 * header fields on a non-4-byte boundary.  And it's a major performance issue
 * even on some architectures which allow it like some implementations of the
 * x86 ISA.  However, some architectures don't mind this and for some very
 * edge-case performance sensitive applications (like forwarding large volumes
 * of small packets), setting this DMA offset to 0 will decrease the number of
 * PCI-E Bus transfers enough to measurably affect performance.
 */
static int rx_dma_offset = 2;

#ifdef CONFIG_PCI_IOV
/* Configure the number of PCI-E Virtual Function which are to be instantiated
 * on SR-IOV Capable Physical Functions.
 */
static unsigned int num_vf[NUM_OF_PF_WITH_SRIOV];

module_param_array(num_vf, uint, NULL, 0644);
MODULE_PARM_DESC(num_vf, "number of VFs for each of PFs 0-3, deprecated parameter - please use the pci sysfs interface.");
#endif

/* TX Queue select used to determine what algorithm to use for selecting TX
 * queue. Select between the kernel provided function (select_queue=0) or user
 * cxgb_select_queue function (select_queue=1)
 *
 * Default: select_queue=0
 */
static int select_queue;
module_param(select_queue, int, 0644);
MODULE_PARM_DESC(select_queue,
                 "Select between kernel provided method of selecting or driver method of selecting TX queue. Default is kernel method.");

static struct dentry *cxgb4_debugfs_root;

LIST_HEAD(adapter_list);
DEFINE_MUTEX(uld_mutex);
/* Adapter list to be accessed from atomic context */
static LIST_HEAD(adap_rcu_list);
static DEFINE_SPINLOCK(adap_rcu_lock);
static struct cxgb4_uld_info ulds[CXGB4_ULD_MAX];
static const char *const uld_str[] = { "RDMA", "iSCSI", "iSCSIT" };

static void link_report(struct net_device *dev)
{
        if (!netif_carrier_ok(dev))
                netdev_info(dev, "link down\n");
        else {
                static const char *fc[] = { "no", "Rx", "Tx", "Tx/Rx" };

                const char *s;
                const struct port_info *p = netdev_priv(dev);

                switch (p->link_cfg.speed) {
                case 10000:
                        s = "10Gbps";
                        break;
                case 1000:
                        s = "1000Mbps";
                        break;
                case 100:
                        s = "100Mbps";
                        break;
                case 40000:
                        s = "40Gbps";
                        break;
                default:
                        pr_info("%s: unsupported speed: %d\n",
                                dev->name, p->link_cfg.speed);
                        return;
                }

                netdev_info(dev, "link up, %s, full-duplex, %s PAUSE\n", s,
                            fc[p->link_cfg.fc]);
        }
}

#ifdef CONFIG_CHELSIO_T4_DCB
/* Set up/tear down Data Center Bridging Priority mapping for a net device. */
static void dcb_tx_queue_prio_enable(struct net_device *dev, int enable)
{
        struct port_info *pi = netdev_priv(dev);
        struct adapter *adap = pi->adapter;
        struct sge_eth_txq *txq = &adap->sge.ethtxq[pi->first_qset];
        int i;

        /* We use a simple mapping of Port TX Queue Index to DCB
         * Priority when we're enabling DCB.
         */
        for (i = 0; i < pi->nqsets; i++, txq++) {
                u32 name, value;
                int err;

                name = (FW_PARAMS_MNEM_V(FW_PARAMS_MNEM_DMAQ) |
                        FW_PARAMS_PARAM_X_V(
                                FW_PARAMS_PARAM_DMAQ_EQ_DCBPRIO_ETH) |
                        FW_PARAMS_PARAM_YZ_V(txq->q.cntxt_id));
                value = enable ? i : 0xffffffff;

                /* Since we can be called while atomic (from "interrupt
                 * level") we need to issue the Set Parameters Commannd
                 * without sleeping (timeout < 0).
                 */
                err = t4_set_params_timeout(adap, adap->mbox, adap->pf, 0, 1,
                                            &name, &value,
                                            -FW_CMD_MAX_TIMEOUT);

                if (err)
                        dev_err(adap->pdev_dev,
                                "Can't %s DCB Priority on port %d, TX Queue %d: err=%d\n",
                                enable ? "set" : "unset", pi->port_id, i, -err);
                else
                        txq->dcb_prio = value;
        }
}
#endif /* CONFIG_CHELSIO_T4_DCB */

int cxgb4_dcb_enabled(const struct net_device *dev)
{
#ifdef CONFIG_CHELSIO_T4_DCB
        struct port_info *pi = netdev_priv(dev);

        if (!pi->dcb.enabled)
                return 0;

        return ((pi->dcb.state == CXGB4_DCB_STATE_FW_ALLSYNCED) ||
                (pi->dcb.state == CXGB4_DCB_STATE_HOST));
#else
        return 0;
#endif
}
EXPORT_SYMBOL(cxgb4_dcb_enabled);

void t4_os_link_changed(struct adapter *adapter, int port_id, int link_stat)
{
        struct net_device *dev = adapter->port[port_id];

        /* Skip changes from disabled ports. */
        if (netif_running(dev) && link_stat != netif_carrier_ok(dev)) {
                if (link_stat)
                        netif_carrier_on(dev);
                else {
#ifdef CONFIG_CHELSIO_T4_DCB
                        if (cxgb4_dcb_enabled(dev)) {
                                cxgb4_dcb_state_init(dev);
                                dcb_tx_queue_prio_enable(dev, false);
                        }
#endif /* CONFIG_CHELSIO_T4_DCB */
                        netif_carrier_off(dev);
                }

                link_report(dev);
        }
}

void t4_os_portmod_changed(const struct adapter *adap, int port_id)
{
        static const char *mod_str[] = {
                NULL, "LR", "SR", "ER", "passive DA", "active DA", "LRM"
        };

        const struct net_device *dev = adap->port[port_id];
        const struct port_info *pi = netdev_priv(dev);

        if (pi->mod_type == FW_PORT_MOD_TYPE_NONE)
                netdev_info(dev, "port module unplugged\n");
        else if (pi->mod_type < ARRAY_SIZE(mod_str))
                netdev_info(dev, "%s module inserted\n", mod_str[pi->mod_type]);
        else if (pi->mod_type == FW_PORT_MOD_TYPE_NOTSUPPORTED)
                netdev_info(dev, "%s: unsupported port module inserted\n",
                            dev->name);
        else if (pi->mod_type == FW_PORT_MOD_TYPE_UNKNOWN)
                netdev_info(dev, "%s: unknown port module inserted\n",
                            dev->name);
        else if (pi->mod_type == FW_PORT_MOD_TYPE_ERROR)
                netdev_info(dev, "%s: transceiver module error\n", dev->name);
        else
                netdev_info(dev, "%s: unknown module type %d inserted\n",
                            dev->name, pi->mod_type);
}

int dbfifo_int_thresh = 10; /* 10 == 640 entry threshold */
module_param(dbfifo_int_thresh, int, 0644);
MODULE_PARM_DESC(dbfifo_int_thresh, "doorbell fifo interrupt threshold");

/*
 * usecs to sleep while draining the dbfifo
 */
static int dbfifo_drain_delay = 1000;
module_param(dbfifo_drain_delay, int, 0644);
MODULE_PARM_DESC(dbfifo_drain_delay,
                 "usecs to sleep while draining the dbfifo");

static inline int cxgb4_set_addr_hash(struct port_info *pi)
{
        struct adapter *adap = pi->adapter;
        u64 vec = 0;
        bool ucast = false;
        struct hash_mac_addr *entry;

        /* Calculate the hash vector for the updated list and program it */
        list_for_each_entry(entry, &adap->mac_hlist, list) {
                ucast |= is_unicast_ether_addr(entry->addr);
                vec |= (1ULL << hash_mac_addr(entry->addr));
        }
        return t4_set_addr_hash(adap, adap->mbox, pi->viid, ucast,
                                vec, false);
}

static int cxgb4_mac_sync(struct net_device *netdev, const u8 *mac_addr)
{
        struct port_info *pi = netdev_priv(netdev);
        struct adapter *adap = pi->adapter;
        int ret;
        u64 mhash = 0;
        u64 uhash = 0;
        bool free = false;
        bool ucast = is_unicast_ether_addr(mac_addr);
        const u8 *maclist[1] = {mac_addr};
        struct hash_mac_addr *new_entry;

        ret = t4_alloc_mac_filt(adap, adap->mbox, pi->viid, free, 1, maclist,
                                NULL, ucast ? &uhash : &mhash, false);
        if (ret < 0)
                goto out;
        /* if hash != 0, then add the addr to hash addr list
         * so on the end we will calculate the hash for the
         * list and program it
         */
        if (uhash || mhash) {
                new_entry = kzalloc(sizeof(*new_entry), GFP_ATOMIC);
                if (!new_entry)
                        return -ENOMEM;
                ether_addr_copy(new_entry->addr, mac_addr);
                list_add_tail(&new_entry->list, &adap->mac_hlist);
                ret = cxgb4_set_addr_hash(pi);
        }
out:
        return ret < 0 ? ret : 0;
}

static int cxgb4_mac_unsync(struct net_device *netdev, const u8 *mac_addr)
{
        struct port_info *pi = netdev_priv(netdev);
        struct adapter *adap = pi->adapter;
        int ret;
        const u8 *maclist[1] = {mac_addr};
        struct hash_mac_addr *entry, *tmp;

        /* If the MAC address to be removed is in the hash addr
         * list, delete it from the list and update hash vector
         */
        list_for_each_entry_safe(entry, tmp, &adap->mac_hlist, list) {
                if (ether_addr_equal(entry->addr, mac_addr)) {
                        list_del(&entry->list);
                        kfree(entry);
                        return cxgb4_set_addr_hash(pi);
                }
        }

        ret = t4_free_mac_filt(adap, adap->mbox, pi->viid, 1, maclist, false);
        return ret < 0 ? -EINVAL : 0;
}

/*
 * Set Rx properties of a port, such as promiscruity, address filters, and MTU.
 * If @mtu is -1 it is left unchanged.
 */
static int set_rxmode(struct net_device *dev, int mtu, bool sleep_ok)
{
        struct port_info *pi = netdev_priv(dev);
        struct adapter *adapter = pi->adapter;

        __dev_uc_sync(dev, cxgb4_mac_sync, cxgb4_mac_unsync);
        __dev_mc_sync(dev, cxgb4_mac_sync, cxgb4_mac_unsync);

        return t4_set_rxmode(adapter, adapter->mbox, pi->viid, mtu,
                             (dev->flags & IFF_PROMISC) ? 1 : 0,
                             (dev->flags & IFF_ALLMULTI) ? 1 : 0, 1, -1,
                             sleep_ok);
}

/**
 *      link_start - enable a port
 *      @dev: the port to enable
 *
 *      Performs the MAC and PHY actions needed to enable a port.
 */
static int link_start(struct net_device *dev)
{
        int ret;
        struct port_info *pi = netdev_priv(dev);
        unsigned int mb = pi->adapter->pf;

        /*
         * We do not set address filters and promiscuity here, the stack does
         * that step explicitly.
         */
        ret = t4_set_rxmode(pi->adapter, mb, pi->viid, dev->mtu, -1, -1, -1,
                            !!(dev->features & NETIF_F_HW_VLAN_CTAG_RX), true);
        if (ret == 0) {
                ret = t4_change_mac(pi->adapter, mb, pi->viid,
                                    pi->xact_addr_filt, dev->dev_addr, true,
                                    true);
                if (ret >= 0) {
                        pi->xact_addr_filt = ret;
                        ret = 0;
                }
        }
        if (ret == 0)
                ret = t4_link_l1cfg(pi->adapter, mb, pi->tx_chan,
                                    &pi->link_cfg);
        if (ret == 0) {
                local_bh_disable();
                ret = t4_enable_vi_params(pi->adapter, mb, pi->viid, true,
                                          true, CXGB4_DCB_ENABLED);
                local_bh_enable();
        }

        return ret;
}

#ifdef CONFIG_CHELSIO_T4_DCB
/* Handle a Data Center Bridging update message from the firmware. */
static void dcb_rpl(struct adapter *adap, const struct fw_port_cmd *pcmd)
{
        int port = FW_PORT_CMD_PORTID_G(ntohl(pcmd->op_to_portid));
        struct net_device *dev = adap->port[adap->chan_map[port]];
        int old_dcb_enabled = cxgb4_dcb_enabled(dev);
        int new_dcb_enabled;

        cxgb4_dcb_handle_fw_update(adap, pcmd);
        new_dcb_enabled = cxgb4_dcb_enabled(dev);

        /* If the DCB has become enabled or disabled on the port then we're
         * going to need to set up/tear down DCB Priority parameters for the
         * TX Queues associated with the port.
         */
        if (new_dcb_enabled != old_dcb_enabled)
                dcb_tx_queue_prio_enable(dev, new_dcb_enabled);
}
#endif /* CONFIG_CHELSIO_T4_DCB */

/* Clear a filter and release any of its resources that we own.  This also
 * clears the filter's "pending" status.
 */
static void clear_filter(struct adapter *adap, struct filter_entry *f)
{
        /* If the new or old filter have loopback rewriteing rules then we'll
         * need to free any existing Layer Two Table (L2T) entries of the old
         * filter rule.  The firmware will handle freeing up any Source MAC
         * Table (SMT) entries used for rewriting Source MAC Addresses in
         * loopback rules.
         */
        if (f->l2t)
                cxgb4_l2t_release(f->l2t);

        /* The zeroing of the filter rule below clears the filter valid,
         * pending, locked flags, l2t pointer, etc. so it's all we need for
         * this operation.
         */
        memset(f, 0, sizeof(*f));
}

/* Handle a filter write/deletion reply.
 */
static void filter_rpl(struct adapter *adap, const struct cpl_set_tcb_rpl *rpl)
{
        unsigned int idx = GET_TID(rpl);
        unsigned int nidx = idx - adap->tids.ftid_base;
        unsigned int ret;
        struct filter_entry *f;

        if (idx >= adap->tids.ftid_base && nidx <
           (adap->tids.nftids + adap->tids.nsftids)) {
                idx = nidx;
                ret = TCB_COOKIE_G(rpl->cookie);
                f = &adap->tids.ftid_tab[idx];

                if (ret == FW_FILTER_WR_FLT_DELETED) {
                        /* Clear the filter when we get confirmation from the
                         * hardware that the filter has been deleted.
                         */
                        clear_filter(adap, f);
                } else if (ret == FW_FILTER_WR_SMT_TBL_FULL) {
                        dev_err(adap->pdev_dev, "filter %u setup failed due to full SMT\n",
                                idx);
                        clear_filter(adap, f);
                } else if (ret == FW_FILTER_WR_FLT_ADDED) {
                        f->smtidx = (be64_to_cpu(rpl->oldval) >> 24) & 0xff;
                        f->pending = 0;  /* asynchronous setup completed */
                        f->valid = 1;
                } else {
                        /* Something went wrong.  Issue a warning about the
                         * problem and clear everything out.
                         */
                        dev_err(adap->pdev_dev, "filter %u setup failed with error %u\n",
                                idx, ret);
                        clear_filter(adap, f);
                }
        }
}

/* Response queue handler for the FW event queue.
 */
static int fwevtq_handler(struct sge_rspq *q, const __be64 *rsp,
                          const struct pkt_gl *gl)
{
        u8 opcode = ((const struct rss_header *)rsp)->opcode;

        rsp++;                                          /* skip RSS header */

        /* FW can send EGR_UPDATEs encapsulated in a CPL_FW4_MSG.
         */
        if (unlikely(opcode == CPL_FW4_MSG &&
           ((const struct cpl_fw4_msg *)rsp)->type == FW_TYPE_RSSCPL)) {
                rsp++;
                opcode = ((const struct rss_header *)rsp)->opcode;
                rsp++;
                if (opcode != CPL_SGE_EGR_UPDATE) {
                        dev_err(q->adap->pdev_dev, "unexpected FW4/CPL %#x on FW event queue\n"
                                , opcode);
                        goto out;
                }
        }

        if (likely(opcode == CPL_SGE_EGR_UPDATE)) {
                const struct cpl_sge_egr_update *p = (void *)rsp;
                unsigned int qid = EGR_QID_G(ntohl(p->opcode_qid));
                struct sge_txq *txq;

                txq = q->adap->sge.egr_map[qid - q->adap->sge.egr_start];
                txq->restarts++;
                if ((u8 *)txq < (u8 *)q->adap->sge.ofldtxq) {
                        struct sge_eth_txq *eq;

                        eq = container_of(txq, struct sge_eth_txq, q);
                        netif_tx_wake_queue(eq->txq);
                } else {
                        struct sge_ofld_txq *oq;

                        oq = container_of(txq, struct sge_ofld_txq, q);
                        tasklet_schedule(&oq->qresume_tsk);
                }
        } else if (opcode == CPL_FW6_MSG || opcode == CPL_FW4_MSG) {
                const struct cpl_fw6_msg *p = (void *)rsp;

#ifdef CONFIG_CHELSIO_T4_DCB
                const struct fw_port_cmd *pcmd = (const void *)p->data;
                unsigned int cmd = FW_CMD_OP_G(ntohl(pcmd->op_to_portid));
                unsigned int action =
                        FW_PORT_CMD_ACTION_G(ntohl(pcmd->action_to_len16));

                if (cmd == FW_PORT_CMD &&
                    action == FW_PORT_ACTION_GET_PORT_INFO) {
                        int port = FW_PORT_CMD_PORTID_G(
                                        be32_to_cpu(pcmd->op_to_portid));
                        struct net_device *dev =
                                q->adap->port[q->adap->chan_map[port]];
                        int state_input = ((pcmd->u.info.dcbxdis_pkd &
                                            FW_PORT_CMD_DCBXDIS_F)
                                           ? CXGB4_DCB_INPUT_FW_DISABLED
                                           : CXGB4_DCB_INPUT_FW_ENABLED);

                        cxgb4_dcb_state_fsm(dev, state_input);
                }

                if (cmd == FW_PORT_CMD &&
                    action == FW_PORT_ACTION_L2_DCB_CFG)
                        dcb_rpl(q->adap, pcmd);
                else
#endif
                        if (p->type == 0)
                                t4_handle_fw_rpl(q->adap, p->data);
        } else if (opcode == CPL_L2T_WRITE_RPL) {
                const struct cpl_l2t_write_rpl *p = (void *)rsp;

                do_l2t_write_rpl(q->adap, p);
        } else if (opcode == CPL_SET_TCB_RPL) {
                const struct cpl_set_tcb_rpl *p = (void *)rsp;

                filter_rpl(q->adap, p);
        } else
                dev_err(q->adap->pdev_dev,
                        "unexpected CPL %#x on FW event queue\n", opcode);
out:
        return 0;
}

/* Flush the aggregated lro sessions */
static void uldrx_flush_handler(struct sge_rspq *q)
{
        if (ulds[q->uld].lro_flush)
                ulds[q->uld].lro_flush(&q->lro_mgr);
}

/**
 *      uldrx_handler - response queue handler for ULD queues
 *      @q: the response queue that received the packet
 *      @rsp: the response queue descriptor holding the offload message
 *      @gl: the gather list of packet fragments
 *
 *      Deliver an ingress offload packet to a ULD.  All processing is done by
 *      the ULD, we just maintain statistics.
 */
static int uldrx_handler(struct sge_rspq *q, const __be64 *rsp,
                         const struct pkt_gl *gl)
{
        struct sge_ofld_rxq *rxq = container_of(q, struct sge_ofld_rxq, rspq);
        int ret;

        /* FW can send CPLs encapsulated in a CPL_FW4_MSG.
         */
        if (((const struct rss_header *)rsp)->opcode == CPL_FW4_MSG &&
            ((const struct cpl_fw4_msg *)(rsp + 1))->type == FW_TYPE_RSSCPL)
                rsp += 2;

        if (q->flush_handler)
                ret = ulds[q->uld].lro_rx_handler(q->adap->uld_handle[q->uld],
                                                  rsp, gl, &q->lro_mgr,
                                                  &q->napi);
        else
                ret = ulds[q->uld].rx_handler(q->adap->uld_handle[q->uld],
                                              rsp, gl);

        if (ret) {
                rxq->stats.nomem++;
                return -1;
        }

        if (gl == NULL)
                rxq->stats.imm++;
        else if (gl == CXGB4_MSG_AN)
                rxq->stats.an++;
        else
                rxq->stats.pkts++;
        return 0;
}

static void disable_msi(struct adapter *adapter)
{
        if (adapter->flags & USING_MSIX) {
                pci_disable_msix(adapter->pdev);
                adapter->flags &= ~USING_MSIX;
        } else if (adapter->flags & USING_MSI) {
                pci_disable_msi(adapter->pdev);
                adapter->flags &= ~USING_MSI;
        }
}

/*
 * Interrupt handler for non-data events used with MSI-X.
 */
static irqreturn_t t4_nondata_intr(int irq, void *cookie)
{
        struct adapter *adap = cookie;
        u32 v = t4_read_reg(adap, MYPF_REG(PL_PF_INT_CAUSE_A));

        if (v & PFSW_F) {
                adap->swintr = 1;
                t4_write_reg(adap, MYPF_REG(PL_PF_INT_CAUSE_A), v);
        }
        if (adap->flags & MASTER_PF)
                t4_slow_intr_handler(adap);
        return IRQ_HANDLED;
}

/*
 * Name the MSI-X interrupts.
 */
static void name_msix_vecs(struct adapter *adap)
{
        int i, j, msi_idx = 2, n = sizeof(adap->msix_info[0].desc);

        /* non-data interrupts */
        snprintf(adap->msix_info[0].desc, n, "%s", adap->port[0]->name);

        /* FW events */
        snprintf(adap->msix_info[1].desc, n, "%s-FWeventq",
                 adap->port[0]->name);

        /* Ethernet queues */
        for_each_port(adap, j) {
                struct net_device *d = adap->port[j];
                const struct port_info *pi = netdev_priv(d);

                for (i = 0; i < pi->nqsets; i++, msi_idx++)
                        snprintf(adap->msix_info[msi_idx].desc, n, "%s-Rx%d",
                                 d->name, i);
        }

        /* offload queues */
        for_each_iscsirxq(&adap->sge, i)
                snprintf(adap->msix_info[msi_idx++].desc, n, "%s-iscsi%d",
                         adap->port[0]->name, i);

        for_each_iscsitrxq(&adap->sge, i)
                snprintf(adap->msix_info[msi_idx++].desc, n, "%s-iSCSIT%d",
                         adap->port[0]->name, i);

        for_each_rdmarxq(&adap->sge, i)
                snprintf(adap->msix_info[msi_idx++].desc, n, "%s-rdma%d",
                         adap->port[0]->name, i);

        for_each_rdmaciq(&adap->sge, i)
                snprintf(adap->msix_info[msi_idx++].desc, n, "%s-rdma-ciq%d",
                         adap->port[0]->name, i);
}

static int request_msix_queue_irqs(struct adapter *adap)
{
        struct sge *s = &adap->sge;
        int err, ethqidx, iscsiqidx = 0, rdmaqidx = 0, rdmaciqqidx = 0;
        int iscsitqidx = 0;
        int msi_index = 2;

        err = request_irq(adap->msix_info[1].vec, t4_sge_intr_msix, 0,
                          adap->msix_info[1].desc, &s->fw_evtq);
        if (err)
                return err;

        for_each_ethrxq(s, ethqidx) {
                err = request_irq(adap->msix_info[msi_index].vec,
                                  t4_sge_intr_msix, 0,
                                  adap->msix_info[msi_index].desc,
                                  &s->ethrxq[ethqidx].rspq);
                if (err)
                        goto unwind;
                msi_index++;
        }
        for_each_iscsirxq(s, iscsiqidx) {
                err = request_irq(adap->msix_info[msi_index].vec,
                                  t4_sge_intr_msix, 0,
                                  adap->msix_info[msi_index].desc,
                                  &s->iscsirxq[iscsiqidx].rspq);
                if (err)
                        goto unwind;
                msi_index++;
        }
        for_each_iscsitrxq(s, iscsitqidx) {
                err = request_irq(adap->msix_info[msi_index].vec,
                                  t4_sge_intr_msix, 0,
                                  adap->msix_info[msi_index].desc,
                                  &s->iscsitrxq[iscsitqidx].rspq);
                if (err)
                        goto unwind;
                msi_index++;
        }
        for_each_rdmarxq(s, rdmaqidx) {
                err = request_irq(adap->msix_info[msi_index].vec,
                                  t4_sge_intr_msix, 0,
                                  adap->msix_info[msi_index].desc,
                                  &s->rdmarxq[rdmaqidx].rspq);
                if (err)
                        goto unwind;
                msi_index++;
        }
        for_each_rdmaciq(s, rdmaciqqidx) {
                err = request_irq(adap->msix_info[msi_index].vec,
                                  t4_sge_intr_msix, 0,
                                  adap->msix_info[msi_index].desc,
                                  &s->rdmaciq[rdmaciqqidx].rspq);
                if (err)
                        goto unwind;
                msi_index++;
        }
        return 0;

unwind:
        while (--rdmaciqqidx >= 0)
                free_irq(adap->msix_info[--msi_index].vec,
                         &s->rdmaciq[rdmaciqqidx].rspq);
        while (--rdmaqidx >= 0)
                free_irq(adap->msix_info[--msi_index].vec,
                         &s->rdmarxq[rdmaqidx].rspq);
        while (--iscsitqidx >= 0)
                free_irq(adap->msix_info[--msi_index].vec,
                         &s->iscsitrxq[iscsitqidx].rspq);
        while (--iscsiqidx >= 0)
                free_irq(adap->msix_info[--msi_index].vec,
                         &s->iscsirxq[iscsiqidx].rspq);
        while (--ethqidx >= 0)
                free_irq(adap->msix_info[--msi_index].vec,
                         &s->ethrxq[ethqidx].rspq);
        free_irq(adap->msix_info[1].vec, &s->fw_evtq);
        return err;
}

static void free_msix_queue_irqs(struct adapter *adap)
{
        int i, msi_index = 2;
        struct sge *s = &adap->sge;

        free_irq(adap->msix_info[1].vec, &s->fw_evtq);
        for_each_ethrxq(s, i)
                free_irq(adap->msix_info[msi_index++].vec, &s->ethrxq[i].rspq);
        for_each_iscsirxq(s, i)
                free_irq(adap->msix_info[msi_index++].vec,
                         &s->iscsirxq[i].rspq);
        for_each_iscsitrxq(s, i)
                free_irq(adap->msix_info[msi_index++].vec,
                         &s->iscsitrxq[i].rspq);
        for_each_rdmarxq(s, i)
                free_irq(adap->msix_info[msi_index++].vec, &s->rdmarxq[i].rspq);
        for_each_rdmaciq(s, i)
                free_irq(adap->msix_info[msi_index++].vec, &s->rdmaciq[i].rspq);
}

/**
 *      cxgb4_write_rss - write the RSS table for a given port
 *      @pi: the port
 *      @queues: array of queue indices for RSS
 *
 *      Sets up the portion of the HW RSS table for the port's VI to distribute
 *      packets to the Rx queues in @queues.
 *      Should never be called before setting up sge eth rx queues
 */
int cxgb4_write_rss(const struct port_info *pi, const u16 *queues)
{
        u16 *rss;
        int i, err;
        struct adapter *adapter = pi->adapter;
        const struct sge_eth_rxq *rxq;

        rxq = &adapter->sge.ethrxq[pi->first_qset];
        rss = kmalloc(pi->rss_size * sizeof(u16), GFP_KERNEL);
        if (!rss)
                return -ENOMEM;

        /* map the queue indices to queue ids */
        for (i = 0; i < pi->rss_size; i++, queues++)
                rss[i] = rxq[*queues].rspq.abs_id;

        err = t4_config_rss_range(adapter, adapter->pf, pi->viid, 0,
                                  pi->rss_size, rss, pi->rss_size);
        /* If Tunnel All Lookup isn't specified in the global RSS
         * Configuration, then we need to specify a default Ingress
         * Queue for any ingress packets which aren't hashed.  We'll
         * use our first ingress queue ...
         */
        if (!err)
                err = t4_config_vi_rss(adapter, adapter->mbox, pi->viid,
                                       FW_RSS_VI_CONFIG_CMD_IP6FOURTUPEN_F |
                                       FW_RSS_VI_CONFIG_CMD_IP6TWOTUPEN_F |
                                       FW_RSS_VI_CONFIG_CMD_IP4FOURTUPEN_F |
                                       FW_RSS_VI_CONFIG_CMD_IP4TWOTUPEN_F |
                                       FW_RSS_VI_CONFIG_CMD_UDPEN_F,
                                       rss[0]);
        kfree(rss);
        return err;
}

/**
 *      setup_rss - configure RSS
 *      @adap: the adapter
 *
 *      Sets up RSS for each port.
 */
static int setup_rss(struct adapter *adap)
{
        int i, j, err;

        for_each_port(adap, i) {
                const struct port_info *pi = adap2pinfo(adap, i);

                /* Fill default values with equal distribution */
                for (j = 0; j < pi->rss_size; j++)
                        pi->rss[j] = j % pi->nqsets;

                err = cxgb4_write_rss(pi, pi->rss);
                if (err)
                        return err;
        }
        return 0;
}

/*
 * Return the channel of the ingress queue with the given qid.
 */
static unsigned int rxq_to_chan(const struct sge *p, unsigned int qid)
{
        qid -= p->ingr_start;
        return netdev2pinfo(p->ingr_map[qid]->netdev)->tx_chan;
}

/*
 * Wait until all NAPI handlers are descheduled.
 */
static void quiesce_rx(struct adapter *adap)
{
        int i;

        for (i = 0; i < adap->sge.ingr_sz; i++) {
                struct sge_rspq *q = adap->sge.ingr_map[i];

                if (q && q->handler) {
                        napi_disable(&q->napi);
                        local_bh_disable();
                        while (!cxgb_poll_lock_napi(q))
                                mdelay(1);
                        local_bh_enable();
                }

        }
}

/* Disable interrupt and napi handler */
static void disable_interrupts(struct adapter *adap)
{
        if (adap->flags & FULL_INIT_DONE) {
                t4_intr_disable(adap);
                if (adap->flags & USING_MSIX) {
                        free_msix_queue_irqs(adap);
                        free_irq(adap->msix_info[0].vec, adap);
                } else {
                        free_irq(adap->pdev->irq, adap);
                }
                quiesce_rx(adap);
        }
}

/*
 * Enable NAPI scheduling and interrupt generation for all Rx queues.
 */
static void enable_rx(struct adapter *adap)
{
        int i;

        for (i = 0; i < adap->sge.ingr_sz; i++) {
                struct sge_rspq *q = adap->sge.ingr_map[i];

                if (!q)
                        continue;
                if (q->handler) {
                        cxgb_busy_poll_init_lock(q);
                        napi_enable(&q->napi);
                }
                /* 0-increment GTS to start the timer and enable interrupts */
                t4_write_reg(adap, MYPF_REG(SGE_PF_GTS_A),
                             SEINTARM_V(q->intr_params) |
                             INGRESSQID_V(q->cntxt_id));
        }
}

static int alloc_ofld_rxqs(struct adapter *adap, struct sge_ofld_rxq *q,
                           unsigned int nq, unsigned int per_chan, int msi_idx,
                           u16 *ids, bool lro)
{
        int i, err;

        for (i = 0; i < nq; i++, q++) {
                if (msi_idx > 0)
                        msi_idx++;
                err = t4_sge_alloc_rxq(adap, &q->rspq, false,
                                       adap->port[i / per_chan],
                                       msi_idx, q->fl.size ? &q->fl : NULL,
                                       uldrx_handler,
                                       lro ? uldrx_flush_handler : NULL,
                                       0);
                if (err)
                        return err;
                memset(&q->stats, 0, sizeof(q->stats));
                if (ids)
                        ids[i] = q->rspq.abs_id;
        }
        return 0;
}

/**
 *      setup_sge_queues - configure SGE Tx/Rx/response queues
 *      @adap: the adapter
 *
 *      Determines how many sets of SGE queues to use and initializes them.
 *      We support multiple queue sets per port if we have MSI-X, otherwise
 *      just one queue set per port.
 */
static int setup_sge_queues(struct adapter *adap)
{
        int err, i, j;
        struct sge *s = &adap->sge;

        bitmap_zero(s->starving_fl, s->egr_sz);
        bitmap_zero(s->txq_maperr, s->egr_sz);

        if (adap->flags & USING_MSIX)
                adap->msi_idx = 1;         /* vector 0 is for non-queue interrupts */
        else {
                err = t4_sge_alloc_rxq(adap, &s->intrq, false, adap->port[0], 0,
                                       NULL, NULL, NULL, -1);
                if (err)
                        return err;
                adap->msi_idx = -((int)s->intrq.abs_id + 1);
        }

        /* NOTE: If you add/delete any Ingress/Egress Queue allocations in here,
         * don't forget to update the following which need to be
         * synchronized to and changes here.
         *
         * 1. The calculations of MAX_INGQ in cxgb4.h.
         *
         * 2. Update enable_msix/name_msix_vecs/request_msix_queue_irqs
         *    to accommodate any new/deleted Ingress Queues
         *    which need MSI-X Vectors.
         *
         * 3. Update sge_qinfo_show() to include information on the
         *    new/deleted queues.
         */
        err = t4_sge_alloc_rxq(adap, &s->fw_evtq, true, adap->port[0],
                               adap->msi_idx, NULL, fwevtq_handler, NULL, -1);
        if (err) {
freeout:        t4_free_sge_resources(adap);
                return err;
        }

        for_each_port(adap, i) {
                struct net_device *dev = adap->port[i];
                struct port_info *pi = netdev_priv(dev);
                struct sge_eth_rxq *q = &s->ethrxq[pi->first_qset];
                struct sge_eth_txq *t = &s->ethtxq[pi->first_qset];

                for (j = 0; j < pi->nqsets; j++, q++) {
                        if (adap->msi_idx > 0)
                                adap->msi_idx++;
                        err = t4_sge_alloc_rxq(adap, &q->rspq, false, dev,
                                               adap->msi_idx, &q->fl,
                                               t4_ethrx_handler,
                                               NULL,
                                               t4_get_mps_bg_map(adap,
                                                                 pi->tx_chan));
                        if (err)
                                goto freeout;
                        q->rspq.idx = j;
                        memset(&q->stats, 0, sizeof(q->stats));
                }
                for (j = 0; j < pi->nqsets; j++, t++) {
                        err = t4_sge_alloc_eth_txq(adap, t, dev,
                                        netdev_get_tx_queue(dev, j),
                                        s->fw_evtq.cntxt_id);
                        if (err)
                                goto freeout;
                }
        }

        j = s->iscsiqsets / adap->params.nports; /* iscsi queues per channel */
        for_each_iscsirxq(s, i) {
                err = t4_sge_alloc_ofld_txq(adap, &s->ofldtxq[i],
                                            adap->port[i / j],
                                            s->fw_evtq.cntxt_id);
                if (err)
                        goto freeout;
        }

#define ALLOC_OFLD_RXQS(firstq, nq, per_chan, ids, lro) do { \
        err = alloc_ofld_rxqs(adap, firstq, nq, per_chan, adap->msi_idx, ids, lro); \
        if (err) \
                goto freeout; \
        if (adap->msi_idx > 0) \
                adap->msi_idx += nq; \
} while (0)

        ALLOC_OFLD_RXQS(s->iscsirxq, s->iscsiqsets, j, s->iscsi_rxq, false);
        ALLOC_OFLD_RXQS(s->iscsitrxq, s->niscsitq, j, s->iscsit_rxq, true);
        ALLOC_OFLD_RXQS(s->rdmarxq, s->rdmaqs, 1, s->rdma_rxq, false);
        j = s->rdmaciqs / adap->params.nports; /* rdmaq queues per channel */
        ALLOC_OFLD_RXQS(s->rdmaciq, s->rdmaciqs, j, s->rdma_ciq, false);

#undef ALLOC_OFLD_RXQS

        for_each_port(adap, i) {
                /*
                 * Note that ->rdmarxq[i].rspq.cntxt_id below is 0 if we don't
                 * have RDMA queues, and that's the right value.
                 */
                err = t4_sge_alloc_ctrl_txq(adap, &s->ctrlq[i], adap->port[i],
                                            s->fw_evtq.cntxt_id,
                                            s->rdmarxq[i].rspq.cntxt_id);
                if (err)
                        goto freeout;
        }

        t4_write_reg(adap, is_t4(adap->params.chip) ?
                                MPS_TRC_RSS_CONTROL_A :
                                MPS_T5_TRC_RSS_CONTROL_A,
                     RSSCONTROL_V(netdev2pinfo(adap->port[0])->tx_chan) |
                     QUEUENUMBER_V(s->ethrxq[0].rspq.abs_id));
        return 0;
}

/*
 * Allocate a chunk of memory using kmalloc or, if that fails, vmalloc.
 * The allocated memory is cleared.
 */
void *t4_alloc_mem(size_t size)
{
        void *p = kzalloc(size, GFP_KERNEL | __GFP_NOWARN);

        if (!p)
                p = vzalloc(size);
        return p;
}

/*
 * Free memory allocated through alloc_mem().
 */
void t4_free_mem(void *addr)
{
        kvfree(addr);
}

/* Send a Work Request to write the filter at a specified index.  We construct
 * a Firmware Filter Work Request to have the work done and put the indicated
 * filter into "pending" mode which will prevent any further actions against
 * it till we get a reply from the firmware on the completion status of the
 * request.
 */
static int set_filter_wr(struct adapter *adapter, int fidx)
{
        struct filter_entry *f = &adapter->tids.ftid_tab[fidx];
        struct sk_buff *skb;
        struct fw_filter_wr *fwr;
        unsigned int ftid;

        skb = alloc_skb(sizeof(*fwr), GFP_KERNEL);
        if (!skb)
                return -ENOMEM;

        /* If the new filter requires loopback Destination MAC and/or VLAN
         * rewriting then we need to allocate a Layer 2 Table (L2T) entry for
         * the filter.
         */
        if (f->fs.newdmac || f->fs.newvlan) {
                /* allocate L2T entry for new filter */
                f->l2t = t4_l2t_alloc_switching(adapter, f->fs.vlan,
                                                f->fs.eport, f->fs.dmac);
                if (f->l2t == NULL) {
                        kfree_skb(skb);
                        return -ENOMEM;
                }
        }

        ftid = adapter->tids.ftid_base + fidx;

        fwr = (struct fw_filter_wr *)__skb_put(skb, sizeof(*fwr));
        memset(fwr, 0, sizeof(*fwr));

        /* It would be nice to put most of the following in t4_hw.c but most
         * of the work is translating the cxgbtool ch_filter_specification
         * into the Work Request and the definition of that structure is
         * currently in cxgbtool.h which isn't appropriate to pull into the
         * common code.  We may eventually try to come up with a more neutral
         * filter specification structure but for now it's easiest to simply
         * put this fairly direct code in line ...
         */
        fwr->op_pkd = htonl(FW_WR_OP_V(FW_FILTER_WR));
        fwr->len16_pkd = htonl(FW_WR_LEN16_V(sizeof(*fwr)/16));
        fwr->tid_to_iq =
                htonl(FW_FILTER_WR_TID_V(ftid) |
                      FW_FILTER_WR_RQTYPE_V(f->fs.type) |
                      FW_FILTER_WR_NOREPLY_V(0) |
                      FW_FILTER_WR_IQ_V(f->fs.iq));
        fwr->del_filter_to_l2tix =
                htonl(FW_FILTER_WR_RPTTID_V(f->fs.rpttid) |
                      FW_FILTER_WR_DROP_V(f->fs.action == FILTER_DROP) |
                      FW_FILTER_WR_DIRSTEER_V(f->fs.dirsteer) |
                      FW_FILTER_WR_MASKHASH_V(f->fs.maskhash) |
                      FW_FILTER_WR_DIRSTEERHASH_V(f->fs.dirsteerhash) |
                      FW_FILTER_WR_LPBK_V(f->fs.action == FILTER_SWITCH) |
                      FW_FILTER_WR_DMAC_V(f->fs.newdmac) |
                      FW_FILTER_WR_SMAC_V(f->fs.newsmac) |
                      FW_FILTER_WR_INSVLAN_V(f->fs.newvlan == VLAN_INSERT ||
                                             f->fs.newvlan == VLAN_REWRITE) |
                      FW_FILTER_WR_RMVLAN_V(f->fs.newvlan == VLAN_REMOVE ||
                                            f->fs.newvlan == VLAN_REWRITE) |
                      FW_FILTER_WR_HITCNTS_V(f->fs.hitcnts) |
                      FW_FILTER_WR_TXCHAN_V(f->fs.eport) |
                      FW_FILTER_WR_PRIO_V(f->fs.prio) |
                      FW_FILTER_WR_L2TIX_V(f->l2t ? f->l2t->idx : 0));
        fwr->ethtype = htons(f->fs.val.ethtype);
        fwr->ethtypem = htons(f->fs.mask.ethtype);
        fwr->frag_to_ovlan_vldm =
                (FW_FILTER_WR_FRAG_V(f->fs.val.frag) |
                 FW_FILTER_WR_FRAGM_V(f->fs.mask.frag) |
                 FW_FILTER_WR_IVLAN_VLD_V(f->fs.val.ivlan_vld) |
                 FW_FILTER_WR_OVLAN_VLD_V(f->fs.val.ovlan_vld) |
                 FW_FILTER_WR_IVLAN_VLDM_V(f->fs.mask.ivlan_vld) |
                 FW_FILTER_WR_OVLAN_VLDM_V(f->fs.mask.ovlan_vld));
        fwr->smac_sel = 0;
        fwr->rx_chan_rx_rpl_iq =
                htons(FW_FILTER_WR_RX_CHAN_V(0) |
                      FW_FILTER_WR_RX_RPL_IQ_V(adapter->sge.fw_evtq.abs_id));
        fwr->maci_to_matchtypem =
                htonl(FW_FILTER_WR_MACI_V(f->fs.val.macidx) |
                      FW_FILTER_WR_MACIM_V(f->fs.mask.macidx) |
                      FW_FILTER_WR_FCOE_V(f->fs.val.fcoe) |
                      FW_FILTER_WR_FCOEM_V(f->fs.mask.fcoe) |
                      FW_FILTER_WR_PORT_V(f->fs.val.iport) |
                      FW_FILTER_WR_PORTM_V(f->fs.mask.iport) |
                      FW_FILTER_WR_MATCHTYPE_V(f->fs.val.matchtype) |
                      FW_FILTER_WR_MATCHTYPEM_V(f->fs.mask.matchtype));
        fwr->ptcl = f->fs.val.proto;
        fwr->ptclm = f->fs.mask.proto;
        fwr->ttyp = f->fs.val.tos;
        fwr->ttypm = f->fs.mask.tos;
        fwr->ivlan = htons(f->fs.val.ivlan);
        fwr->ivlanm = htons(f->fs.mask.ivlan);
        fwr->ovlan = htons(f->fs.val.ovlan);
        fwr->ovlanm = htons(f->fs.mask.ovlan);
        memcpy(fwr->lip, f->fs.val.lip, sizeof(fwr->lip));
        memcpy(fwr->lipm, f->fs.mask.lip, sizeof(fwr->lipm));
        memcpy(fwr->fip, f->fs.val.fip, sizeof(fwr->fip));
        memcpy(fwr->fipm, f->fs.mask.fip, sizeof(fwr->fipm));
        fwr->lp = htons(f->fs.val.lport);
        fwr->lpm = htons(f->fs.mask.lport);
        fwr->fp = htons(f->fs.val.fport);
        fwr->fpm = htons(f->fs.mask.fport);
        if (f->fs.newsmac)
                memcpy(fwr->sma, f->fs.smac, sizeof(fwr->sma));

        /* Mark the filter as "pending" and ship off the Filter Work Request.
         * When we get the Work Request Reply we'll clear the pending status.
         */
        f->pending = 1;
        set_wr_txq(skb, CPL_PRIORITY_CONTROL, f->fs.val.iport & 0x3);
        t4_ofld_send(adapter, skb);
        return 0;
}

/* Delete the filter at a specified index.
 */
static int del_filter_wr(struct adapter *adapter, int fidx)
{
        struct filter_entry *f = &adapter->tids.ftid_tab[fidx];
        struct sk_buff *skb;
        struct fw_filter_wr *fwr;
        unsigned int len, ftid;

        len = sizeof(*fwr);
        ftid = adapter->tids.ftid_base + fidx;

        skb = alloc_skb(len, GFP_KERNEL);
        if (!skb)
                return -ENOMEM;

        fwr = (struct fw_filter_wr *)__skb_put(skb, len);
        t4_mk_filtdelwr(ftid, fwr, adapter->sge.fw_evtq.abs_id);

        /* Mark the filter as "pending" and ship off the Filter Work Request.
         * When we get the Work Request Reply we'll clear the pending status.
         */
        f->pending = 1;
        t4_mgmt_tx(adapter, skb);
        return 0;
}

static u16 cxgb_select_queue(struct net_device *dev, struct sk_buff *skb,
                             void *accel_priv, select_queue_fallback_t fallback)
{
        int txq;

#ifdef CONFIG_CHELSIO_T4_DCB
        /* If a Data Center Bridging has been successfully negotiated on this
         * link then we'll use the skb's priority to map it to a TX Queue.
         * The skb's priority is determined via the VLAN Tag Priority Code
         * Point field.
         */
        if (cxgb4_dcb_enabled(dev)) {
                u16 vlan_tci;
                int err;

                err = vlan_get_tag(skb, &vlan_tci);
                if (unlikely(err)) {
                        if (net_ratelimit())
                                netdev_warn(dev,
                                            "TX Packet without VLAN Tag on DCB Link\n");
                        txq = 0;
                } else {
                        txq = (vlan_tci & VLAN_PRIO_MASK) >> VLAN_PRIO_SHIFT;
#ifdef CONFIG_CHELSIO_T4_FCOE
                        if (skb->protocol == htons(ETH_P_FCOE))
                                txq = skb->priority & 0x7;
#endif /* CONFIG_CHELSIO_T4_FCOE */
                }
                return txq;
        }
#endif /* CONFIG_CHELSIO_T4_DCB */

        if (select_queue) {
                txq = (skb_rx_queue_recorded(skb)
                        ? skb_get_rx_queue(skb)
                        : smp_processor_id());

                while (unlikely(txq >= dev->real_num_tx_queues))
                        txq -= dev->real_num_tx_queues;

                return txq;
        }

        return fallback(dev, skb) % dev->real_num_tx_queues;
}

static int closest_timer(const struct sge *s, int time)
{
        int i, delta, match = 0, min_delta = INT_MAX;

        for (i = 0; i < ARRAY_SIZE(s->timer_val); i++) {
                delta = time - s->timer_val[i];
                if (delta < 0)
                        delta = -delta;
                if (delta < min_delta) {
                        min_delta = delta;
                        match = i;
                }
        }
        return match;
}

static int closest_thres(const struct sge *s, int thres)
{
        int i, delta, match = 0, min_delta = INT_MAX;

        for (i = 0; i < ARRAY_SIZE(s->counter_val); i++) {
                delta = thres - s->counter_val[i];
                if (delta < 0)
                        delta = -delta;
                if (delta < min_delta) {
                        min_delta = delta;
                        match = i;
                }
        }
        return match;
}

/**
 *      cxgb4_set_rspq_intr_params - set a queue's interrupt holdoff parameters
 *      @q: the Rx queue
 *      @us: the hold-off time in us, or 0 to disable timer
 *      @cnt: the hold-off packet count, or 0 to disable counter
 *
 *      Sets an Rx queue's interrupt hold-off time and packet count.  At least
 *      one of the two needs to be enabled for the queue to generate interrupts.
 */
int cxgb4_set_rspq_intr_params(struct sge_rspq *q,
                               unsigned int us, unsigned int cnt)
{
        struct adapter *adap = q->adap;

        if ((us | cnt) == 0)
                cnt = 1;

        if (cnt) {
                int err;
                u32 v, new_idx;

                new_idx = closest_thres(&adap->sge, cnt);
                if (q->desc && q->pktcnt_idx != new_idx) {
                        /* the queue has already been created, update it */
                        v = FW_PARAMS_MNEM_V(FW_PARAMS_MNEM_DMAQ) |
                            FW_PARAMS_PARAM_X_V(
                                        FW_PARAMS_PARAM_DMAQ_IQ_INTCNTTHRESH) |
                            FW_PARAMS_PARAM_YZ_V(q->cntxt_id);
                        err = t4_set_params(adap, adap->mbox, adap->pf, 0, 1,
                                            &v, &new_idx);
                        if (err)
                                return err;
                }
                q->pktcnt_idx = new_idx;
        }

        us = us == 0 ? 6 : closest_timer(&adap->sge, us);
        q->intr_params = QINTR_TIMER_IDX_V(us) | QINTR_CNT_EN_V(cnt > 0);
        return 0;
}

static int cxgb_set_features(struct net_device *dev, netdev_features_t features)
{
        const struct port_info *pi = netdev_priv(dev);
        netdev_features_t changed = dev->features ^ features;
        int err;

        if (!(changed & NETIF_F_HW_VLAN_CTAG_RX))
                return 0;

        err = t4_set_rxmode(pi->adapter, pi->adapter->pf, pi->viid, -1,
                            -1, -1, -1,
                            !!(features & NETIF_F_HW_VLAN_CTAG_RX), true);
        if (unlikely(err))
                dev->features = features ^ NETIF_F_HW_VLAN_CTAG_RX;
        return err;
}

static int setup_debugfs(struct adapter *adap)
{
        if (IS_ERR_OR_NULL(adap->debugfs_root))
                return -1;

#ifdef CONFIG_DEBUG_FS
        t4_setup_debugfs(adap);
#endif
        return 0;
}

/*
 * upper-layer driver support
 */

/*
 * Allocate an active-open TID and set it to the supplied value.
 */
int cxgb4_alloc_atid(struct tid_info *t, void *data)
{
        int atid = -1;

        spin_lock_bh(&t->atid_lock);
        if (t->afree) {
                union aopen_entry *p = t->afree;

                atid = (p - t->atid_tab) + t->atid_base;
                t->afree = p->next;
                p->data = data;
                t->atids_in_use++;
        }
        spin_unlock_bh(&t->atid_lock);
        return atid;
}
EXPORT_SYMBOL(cxgb4_alloc_atid);

/*
 * Release an active-open TID.
 */
void cxgb4_free_atid(struct tid_info *t, unsigned int atid)
{
        union aopen_entry *p = &t->atid_tab[atid - t->atid_base];

        spin_lock_bh(&t->atid_lock);
        p->next = t->afree;
        t->afree = p;
        t->atids_in_use--;
        spin_unlock_bh(&t->atid_lock);
}
EXPORT_SYMBOL(cxgb4_free_atid);

/*
 * Allocate a server TID and set it to the supplied value.
 */
int cxgb4_alloc_stid(struct tid_info *t, int family, void *data)
{
        int stid;

        spin_lock_bh(&t->stid_lock);
        if (family == PF_INET) {
                stid = find_first_zero_bit(t->stid_bmap, t->nstids);
                if (stid < t->nstids)
                        __set_bit(stid, t->stid_bmap);
                else
                        stid = -1;
        } else {
                stid = bitmap_find_free_region(t->stid_bmap, t->nstids, 1);
                if (stid < 0)
                        stid = -1;
        }
        if (stid >= 0) {
                t->stid_tab[stid].data = data;
                stid += t->stid_base;
                /* IPv6 requires max of 520 bits or 16 cells in TCAM
                 * This is equivalent to 4 TIDs. With CLIP enabled it
                 * needs 2 TIDs.
                 */
                if (family == PF_INET)
                        t->stids_in_use++;
                else
                        t->stids_in_use += 2;
        }
        spin_unlock_bh(&t->stid_lock);
        return stid;
}
EXPORT_SYMBOL(cxgb4_alloc_stid);

/* Allocate a server filter TID and set it to the supplied value.
 */
int cxgb4_alloc_sftid(struct tid_info *t, int family, void *data)
{
        int stid;

        spin_lock_bh(&t->stid_lock);
        if (family == PF_INET) {
                stid = find_next_zero_bit(t->stid_bmap,
                                t->nstids + t->nsftids, t->nstids);
                if (stid < (t->nstids + t->nsftids))
                        __set_bit(stid, t->stid_bmap);
                else
                        stid = -1;
        } else {
                stid = -1;
        }
        if (stid >= 0) {
                t->stid_tab[stid].data = data;
                stid -= t->nstids;
                stid += t->sftid_base;
                t->sftids_in_use++;
        }
        spin_unlock_bh(&t->stid_lock);
        return stid;
}
EXPORT_SYMBOL(cxgb4_alloc_sftid);

/* Release a server TID.
 */
void cxgb4_free_stid(struct tid_info *t, unsigned int stid, int family)
{
        /* Is it a server filter TID? */
        if (t->nsftids && (stid >= t->sftid_base)) {
                stid -= t->sftid_base;
                stid += t->nstids;
        } else {
                stid -= t->stid_base;
        }

        spin_lock_bh(&t->stid_lock);
        if (family == PF_INET)
                __clear_bit(stid, t->stid_bmap);
        else
                bitmap_release_region(t->stid_bmap, stid, 1);
        t->stid_tab[stid].data = NULL;
        if (stid < t->nstids) {
                if (family == PF_INET)
                        t->stids_in_use--;
                else
                        t->stids_in_use -= 2;
        } else {
                t->sftids_in_use--;
        }
        spin_unlock_bh(&t->stid_lock);
}
EXPORT_SYMBOL(cxgb4_free_stid);

/*
 * Populate a TID_RELEASE WR.  Caller must properly size the skb.
 */
static void mk_tid_release(struct sk_buff *skb, unsigned int chan,
                           unsigned int tid)
{
        struct cpl_tid_release *req;

        set_wr_txq(skb, CPL_PRIORITY_SETUP, chan);
        req = (struct cpl_tid_release *)__skb_put(skb, sizeof(*req));
        INIT_TP_WR(req, tid);
        OPCODE_TID(req) = htonl(MK_OPCODE_TID(CPL_TID_RELEASE, tid));
}

/*
 * Queue a TID release request and if necessary schedule a work queue to
 * process it.
 */
static void cxgb4_queue_tid_release(struct tid_info *t, unsigned int chan,
                                    unsigned int tid)
{
        void **p = &t->tid_tab[tid];
        struct adapter *adap = container_of(t, struct adapter, tids);

        spin_lock_bh(&adap->tid_release_lock);
        *p = adap->tid_release_head;
        /* Low 2 bits encode the Tx channel number */
        adap->tid_release_head = (void **)((uintptr_t)p | chan);
        if (!adap->tid_release_task_busy) {
                adap->tid_release_task_busy = true;
                queue_work(adap->workq, &adap->tid_release_task);
        }
        spin_unlock_bh(&adap->tid_release_lock);
}

/*
 * Process the list of pending TID release requests.
 */
static void process_tid_release_list(struct work_struct *work)
{
        struct sk_buff *skb;
        struct adapter *adap;

        adap = container_of(work, struct adapter, tid_release_task);

        spin_lock_bh(&adap->tid_release_lock);
        while (adap->tid_release_head) {
                void **p = adap->tid_release_head;
                unsigned int chan = (uintptr_t)p & 3;
                p = (void *)p - chan;

                adap->tid_release_head = *p;
                *p = NULL;
                spin_unlock_bh(&adap->tid_release_lock);

                while (!(skb = alloc_skb(sizeof(struct cpl_tid_release),
                                         GFP_KERNEL)))
                        schedule_timeout_uninterruptible(1);

                mk_tid_release(skb, chan, p - adap->tids.tid_tab);
                t4_ofld_send(adap, skb);
                spin_lock_bh(&adap->tid_release_lock);
        }
        adap->tid_release_task_busy = false;
        spin_unlock_bh(&adap->tid_release_lock);
}

/*
 * Release a TID and inform HW.  If we are unable to allocate the release
 * message we defer to a work queue.
 */
void cxgb4_remove_tid(struct tid_info *t, unsigned int chan, unsigned int tid)
{
        struct sk_buff *skb;
        struct adapter *adap = container_of(t, struct adapter, tids);

        WARN_ON(tid >= t->ntids);

        if (t->tid_tab[tid]) {
                t->tid_tab[tid] = NULL;
                if (t->hash_base && (tid >= t->hash_base))
                        atomic_dec(&t->hash_tids_in_use);
                else
                        atomic_dec(&t->tids_in_use);
        }

        skb = alloc_skb(sizeof(struct cpl_tid_release), GFP_ATOMIC);
        if (likely(skb)) {
                mk_tid_release(skb, chan, tid);
                t4_ofld_send(adap, skb);
        } else
                cxgb4_queue_tid_release(t, chan, tid);
}
EXPORT_SYMBOL(cxgb4_remove_tid);

/*
 * Allocate and initialize the TID tables.  Returns 0 on success.
 */
static int tid_init(struct tid_info *t)
{
        size_t size;
        unsigned int stid_bmap_size;
        unsigned int natids = t->natids;
        struct adapter *adap = container_of(t, struct adapter, tids);

        stid_bmap_size = BITS_TO_LONGS(t->nstids + t->nsftids);
        size = t->ntids * sizeof(*t->tid_tab) +
               natids * sizeof(*t->atid_tab) +
               t->nstids * sizeof(*t->stid_tab) +
               t->nsftids * sizeof(*t->stid_tab) +
               stid_bmap_size * sizeof(long) +
               t->nftids * sizeof(*t->ftid_tab) +
               t->nsftids * sizeof(*t->ftid_tab);

        t->tid_tab = t4_alloc_mem(size);
        if (!t->tid_tab)
                return -ENOMEM;

        t->atid_tab = (union aopen_entry *)&t->tid_tab[t->ntids];
        t->stid_tab = (struct serv_entry *)&t->atid_tab[natids];
        t->stid_bmap = (unsigned long *)&t->stid_tab[t->nstids + t->nsftids];
        t->ftid_tab = (struct filter_entry *)&t->stid_bmap[stid_bmap_size];
        spin_lock_init(&t->stid_lock);
        spin_lock_init(&t->atid_lock);

        t->stids_in_use = 0;
        t->sftids_in_use = 0;
        t->afree = NULL;
        t->atids_in_use = 0;
        atomic_set(&t->tids_in_use, 0);
        atomic_set(&t->hash_tids_in_use, 0);

        /* Setup the free list for atid_tab and clear the stid bitmap. */
        if (natids) {
                while (--natids)
                        t->atid_tab[natids - 1].next = &t->atid_tab[natids];
                t->afree = t->atid_tab;
        }
        bitmap_zero(t->stid_bmap, t->nstids + t->nsftids);
        /* Reserve stid 0 for T4/T5 adapters */
        if (!t->stid_base &&
            (CHELSIO_CHIP_VERSION(adap->params.chip) <= CHELSIO_T5))
                __set_bit(0, t->stid_bmap);

        return 0;
}

/**
 *      cxgb4_create_server - create an IP server
 *      @dev: the device
 *      @stid: the server TID
 *      @sip: local IP address to bind server to
 *      @sport: the server's TCP port
 *      @queue: queue to direct messages from this server to
 *
 *      Create an IP server for the given port and address.
 *      Returns <0 on error and one of the %NET_XMIT_* values on success.
 */
int cxgb4_create_server(const struct net_device *dev, unsigned int stid,
                        __be32 sip, __be16 sport, __be16 vlan,
                        unsigned int queue)
{
        unsigned int chan;
        struct sk_buff *skb;
        struct adapter *adap;
        struct cpl_pass_open_req *req;
        int ret;

        skb = alloc_skb(sizeof(*req), GFP_KERNEL);
        if (!skb)
                return -ENOMEM;

        adap = netdev2adap(dev);
        req = (struct cpl_pass_open_req *)__skb_put(skb, sizeof(*req));
        INIT_TP_WR(req, 0);
        OPCODE_TID(req) = htonl(MK_OPCODE_TID(CPL_PASS_OPEN_REQ, stid));
        req->local_port = sport;
        req->peer_port = htons(0);
        req->local_ip = sip;
        req->peer_ip = htonl(0);
        chan = rxq_to_chan(&adap->sge, queue);
        req->opt0 = cpu_to_be64(TX_CHAN_V(chan));
        req->opt1 = cpu_to_be64(CONN_POLICY_V(CPL_CONN_POLICY_ASK) |
                                SYN_RSS_ENABLE_F | SYN_RSS_QUEUE_V(queue));
        ret = t4_mgmt_tx(adap, skb);
        return net_xmit_eval(ret);
}
EXPORT_SYMBOL(cxgb4_create_server);

/*      cxgb4_create_server6 - create an IPv6 server
 *      @dev: the device
 *      @stid: the server TID
 *      @sip: local IPv6 address to bind server to
 *      @sport: the server's TCP port
 *      @queue: queue to direct messages from this server to
 *
 *      Create an IPv6 server for the given port and address.
 *      Returns <0 on error and one of the %NET_XMIT_* values on success.
 */
int cxgb4_create_server6(const struct net_device *dev, unsigned int stid,
                         const struct in6_addr *sip, __be16 sport,
                         unsigned int queue)
{
        unsigned int chan;
        struct sk_buff *skb;
        struct adapter *adap;
        struct cpl_pass_open_req6 *req;
        int ret;

        skb = alloc_skb(sizeof(*req), GFP_KERNEL);
        if (!skb)
                return -ENOMEM;

        adap = netdev2adap(dev);
        req = (struct cpl_pass_open_req6 *)__skb_put(skb, sizeof(*req));
        INIT_TP_WR(req, 0);
        OPCODE_TID(req) = htonl(MK_OPCODE_TID(CPL_PASS_OPEN_REQ6, stid));
        req->local_port = sport;
        req->peer_port = htons(0);
        req->local_ip_hi = *(__be64 *)(sip->s6_addr);
        req->local_ip_lo = *(__be64 *)(sip->s6_addr + 8);
        req->peer_ip_hi = cpu_to_be64(0);
        req->peer_ip_lo = cpu_to_be64(0);
        chan = rxq_to_chan(&adap->sge, queue);
        req->opt0 = cpu_to_be64(TX_CHAN_V(chan));
        req->opt1 = cpu_to_be64(CONN_POLICY_V(CPL_CONN_POLICY_ASK) |
                                SYN_RSS_ENABLE_F | SYN_RSS_QUEUE_V(queue));
        ret = t4_mgmt_tx(adap, skb);
        return net_xmit_eval(ret);
}
EXPORT_SYMBOL(cxgb4_create_server6);

int cxgb4_remove_server(const struct net_device *dev, unsigned int stid,
                        unsigned int queue, bool ipv6)
{
        struct sk_buff *skb;
        struct adapter *adap;
        struct cpl_close_listsvr_req *req;
        int ret;

        adap = netdev2adap(dev);

        skb = alloc_skb(sizeof(*req), GFP_KERNEL);
        if (!skb)
                return -ENOMEM;

        req = (struct cpl_close_listsvr_req *)__skb_put(skb, sizeof(*req));
        INIT_TP_WR(req, 0);
        OPCODE_TID(req) = htonl(MK_OPCODE_TID(CPL_CLOSE_LISTSRV_REQ, stid));
        req->reply_ctrl = htons(NO_REPLY_V(0) | (ipv6 ? LISTSVR_IPV6_V(1) :
                                LISTSVR_IPV6_V(0)) | QUEUENO_V(queue));
        ret = t4_mgmt_tx(adap, skb);
        return net_xmit_eval(ret);
}
EXPORT_SYMBOL(cxgb4_remove_server);

/**
 *      cxgb4_best_mtu - find the entry in the MTU table closest to an MTU
 *      @mtus: the HW MTU table
 *      @mtu: the target MTU
 *      @idx: index of selected entry in the MTU table
 *
 *      Returns the index and the value in the HW MTU table that is closest to
 *      but does not exceed @mtu, unless @mtu is smaller than any value in the
 *      table, in which case that smallest available value is selected.
 */
unsigned int cxgb4_best_mtu(const unsigned short *mtus, unsigned short mtu,
                            unsigned int *idx)
{
        unsigned int i = 0;

        while (i < NMTUS - 1 && mtus[i + 1] <= mtu)
                ++i;
        if (idx)
                *idx = i;
        return mtus[i];
}
EXPORT_SYMBOL(cxgb4_best_mtu);

/**
 *     cxgb4_best_aligned_mtu - find best MTU, [hopefully] data size aligned
 *     @mtus: the HW MTU table
 *     @header_size: Header Size
 *     @data_size_max: maximum Data Segment Size
 *     @data_size_align: desired Data Segment Size Alignment (2^N)
 *     @mtu_idxp: HW MTU Table Index return value pointer (possibly NULL)
 *
 *     Similar to cxgb4_best_mtu() but instead of searching the Hardware
 *     MTU Table based solely on a Maximum MTU parameter, we break that
 *     parameter up into a Header Size and Maximum Data Segment Size, and
 *     provide a desired Data Segment Size Alignment.  If we find an MTU in
 *     the Hardware MTU Table which will result in a Data Segment Size with
 *     the requested alignment _and_ that MTU isn't "too far" from the
 *     closest MTU, then we'll return that rather than the closest MTU.
 */
unsigned int cxgb4_best_aligned_mtu(const unsigned short *mtus,
                                    unsigned short header_size,
                                    unsigned short data_size_max,
                                    unsigned short data_size_align,
                                    unsigned int *mtu_idxp)
{
        unsigned short max_mtu = header_size + data_size_max;
        unsigned short data_size_align_mask = data_size_align - 1;
        int mtu_idx, aligned_mtu_idx;

        /* Scan the MTU Table till we find an MTU which is larger than our
         * Maximum MTU or we reach the end of the table.  Along the way,
         * record the last MTU found, if any, which will result in a Data
         * Segment Length matching the requested alignment.
         */
        for (mtu_idx = 0, aligned_mtu_idx = -1; mtu_idx < NMTUS; mtu_idx++) {
                unsigned short data_size = mtus[mtu_idx] - header_size;

                /* If this MTU minus the Header Size would result in a
                 * Data Segment Size of the desired alignment, remember it.
                 */
                if ((data_size & data_size_align_mask) == 0)
                        aligned_mtu_idx = mtu_idx;

                /* If we're not at the end of the Hardware MTU Table and the
                 * next element is larger than our Maximum MTU, drop out of
                 * the loop.
                 */
                if (mtu_idx+1 < NMTUS && mtus[mtu_idx+1] > max_mtu)
                        break;
        }

        /* If we fell out of the loop because we ran to the end of the table,
         * then we just have to use the last [largest] entry.
         */
        if (mtu_idx == NMTUS)
                mtu_idx--;

        /* If we found an MTU which resulted in the requested Data Segment
         * Length alignment and that's "not far" from the largest MTU which is
         * less than or equal to the maximum MTU, then use that.
         */
        if (aligned_mtu_idx >= 0 &&
            mtu_idx - aligned_mtu_idx <= 1)
                mtu_idx = aligned_mtu_idx;

        /* If the caller has passed in an MTU Index pointer, pass the
         * MTU Index back.  Return the MTU value.
         */
        if (mtu_idxp)
                *mtu_idxp = mtu_idx;
        return mtus[mtu_idx];
}
EXPORT_SYMBOL(cxgb4_best_aligned_mtu);

/**
 *      cxgb4_tp_smt_idx - Get the Source Mac Table index for this VI
 *      @chip: chip type
 *      @viid: VI id of the given port
 *
 *      Return the SMT index for this VI.
 */
unsigned int cxgb4_tp_smt_idx(enum chip_type chip, unsigned int viid)
{
        /* In T4/T5, SMT contains 256 SMAC entries organized in
         * 128 rows of 2 entries each.
         * In T6, SMT contains 256 SMAC entries in 256 rows.
         * TODO: The below code needs to be updated when we add support
         * for 256 VFs.
         */
        if (CHELSIO_CHIP_VERSION(chip) <= CHELSIO_T5)
                return ((viid & 0x7f) << 1);
        else
                return (viid & 0x7f);
}
EXPORT_SYMBOL(cxgb4_tp_smt_idx);

/**
 *      cxgb4_port_chan - get the HW channel of a port
 *      @dev: the net device for the port
 *
 *      Return the HW Tx channel of the given port.
 */
unsigned int cxgb4_port_chan(const struct net_device *dev)
{
        return netdev2pinfo(dev)->tx_chan;
}
EXPORT_SYMBOL(cxgb4_port_chan);

unsigned int cxgb4_dbfifo_count(const struct net_device *dev, int lpfifo)
{
        struct adapter *adap = netdev2adap(dev);
        u32 v1, v2, lp_count, hp_count;

        v1 = t4_read_reg(adap, SGE_DBFIFO_STATUS_A);
        v2 = t4_read_reg(adap, SGE_DBFIFO_STATUS2_A);
        if (is_t4(adap->params.chip)) {
                lp_count = LP_COUNT_G(v1);
                hp_count = HP_COUNT_G(v1);
        } else {
                lp_count = LP_COUNT_T5_G(v1);
                hp_count = HP_COUNT_T5_G(v2);
        }
        return lpfifo ? lp_count : hp_count;
}
EXPORT_SYMBOL(cxgb4_dbfifo_count);

/**
 *      cxgb4_port_viid - get the VI id of a port
 *      @dev: the net device for the port
 *
 *      Return the VI id of the given port.
 */
unsigned int cxgb4_port_viid(const struct net_device *dev)
{
        return netdev2pinfo(dev)->viid;
}
EXPORT_SYMBOL(cxgb4_port_viid);

/**
 *      cxgb4_port_idx - get the index of a port
 *      @dev: the net device for the port
 *
 *      Return the index of the given port.
 */
unsigned int cxgb4_port_idx(const struct net_device *dev)
{
        return netdev2pinfo(dev)->port_id;
}
EXPORT_SYMBOL(cxgb4_port_idx);

void cxgb4_get_tcp_stats(struct pci_dev *pdev, struct tp_tcp_stats *v4,
                         struct tp_tcp_stats *v6)
{
        struct adapter *adap = pci_get_drvdata(pdev);

        spin_lock(&adap->stats_lock);
        t4_tp_get_tcp_stats(adap, v4, v6);
        spin_unlock(&adap->stats_lock);
}
EXPORT_SYMBOL(cxgb4_get_tcp_stats);

void cxgb4_iscsi_init(struct net_device *dev, unsigned int tag_mask,
                      const unsigned int *pgsz_order)
{
        struct adapter *adap = netdev2adap(dev);

        t4_write_reg(adap, ULP_RX_ISCSI_TAGMASK_A, tag_mask);
        t4_write_reg(adap, ULP_RX_ISCSI_PSZ_A, HPZ0_V(pgsz_order[0]) |
                     HPZ1_V(pgsz_order[1]) | HPZ2_V(pgsz_order[2]) |
                     HPZ3_V(pgsz_order[3]));
}
EXPORT_SYMBOL(cxgb4_iscsi_init);

int cxgb4_flush_eq_cache(struct net_device *dev)
{
        struct adapter *adap = netdev2adap(dev);

        return t4_sge_ctxt_flush(adap, adap->mbox);
}
EXPORT_SYMBOL(cxgb4_flush_eq_cache);

static int read_eq_indices(struct adapter *adap, u16 qid, u16 *pidx, u16 *cidx)
{
        u32 addr = t4_read_reg(adap, SGE_DBQ_CTXT_BADDR_A) + 24 * qid + 8;
        __be64 indices;
        int ret;

        spin_lock(&adap->win0_lock);
        ret = t4_memory_rw(adap, 0, MEM_EDC0, addr,
                           sizeof(indices), (__be32 *)&indices,
                           T4_MEMORY_READ);
        spin_unlock(&adap->win0_lock);
        if (!ret) {
                *cidx = (be64_to_cpu(indices) >> 25) & 0xffff;
                *pidx = (be64_to_cpu(indices) >> 9) & 0xffff;
        }
        return ret;
}

int cxgb4_sync_txq_pidx(struct net_device *dev, u16 qid, u16 pidx,
                        u16 size)
{
        struct adapter *adap = netdev2adap(dev);
        u16 hw_pidx, hw_cidx;
        int ret;

        ret = read_eq_indices(adap, qid, &hw_pidx, &hw_cidx);
        if (ret)
                goto out;

        if (pidx != hw_pidx) {
                u16 delta;
                u32 val;

                if (pidx >= hw_pidx)
                        delta = pidx - hw_pidx;
                else
                        delta = size - hw_pidx + pidx;

                if (is_t4(adap->params.chip))
                        val = PIDX_V(delta);
                else
                        val = PIDX_T5_V(delta);
                wmb();
                t4_write_reg(adap, MYPF_REG(SGE_PF_KDOORBELL_A),
                             QID_V(qid) | val);
        }
out:
        return ret;
}
EXPORT_SYMBOL(cxgb4_sync_txq_pidx);

int cxgb4_read_tpte(struct net_device *dev, u32 stag, __be32 *tpte)
{
        struct adapter *adap;
        u32 offset, memtype, memaddr;
        u32 edc0_size, edc1_size, mc0_size, mc1_size, size;
        u32 edc0_end, edc1_end, mc0_end, mc1_end;
        int ret;

        adap = netdev2adap(dev);

        offset = ((stag >> 8) * 32) + adap->vres.stag.start;

        /* Figure out where the offset lands in the Memory Type/Address scheme.
         * This code assumes that the memory is laid out starting at offset 0
         * with no breaks as: EDC0, EDC1, MC0, MC1. All cards have both EDC0
         * and EDC1.  Some cards will have neither MC0 nor MC1, most cards have
         * MC0, and some have both MC0 and MC1.
         */
        size = t4_read_reg(adap, MA_EDRAM0_BAR_A);
        edc0_size = EDRAM0_SIZE_G(size) << 20;
        size = t4_read_reg(adap, MA_EDRAM1_BAR_A);
        edc1_size = EDRAM1_SIZE_G(size) << 20;
        size = t4_read_reg(adap, MA_EXT_MEMORY0_BAR_A);
        mc0_size = EXT_MEM0_SIZE_G(size) << 20;

        edc0_end = edc0_size;
        edc1_end = edc0_end + edc1_size;
        mc0_end = edc1_end + mc0_size;

        if (offset < edc0_end) {
                memtype = MEM_EDC0;
                memaddr = offset;
        } else if (offset < edc1_end) {
                memtype = MEM_EDC1;
                memaddr = offset - edc0_end;
        } else {
                if (offset < mc0_end) {
                        memtype = MEM_MC0;
                        memaddr = offset - edc1_end;
                } else if (is_t5(adap->params.chip)) {
                        size = t4_read_reg(adap, MA_EXT_MEMORY1_BAR_A);
                        mc1_size = EXT_MEM1_SIZE_G(size) << 20;
                        mc1_end = mc0_end + mc1_size;
                        if (offset < mc1_end) {
                                memtype = MEM_MC1;
                                memaddr = offset - mc0_end;
                        } else {
                                /* offset beyond the end of any memory */
                                goto err;
                        }
                } else {
                        /* T4/T6 only has a single memory channel */
                        goto err;
                }
        }

        spin_lock(&adap->win0_lock);
        ret = t4_memory_rw(adap, 0, memtype, memaddr, 32, tpte, T4_MEMORY_READ);
        spin_unlock(&adap->win0_lock);
        return ret;

err:
        dev_err(adap->pdev_dev, "stag %#x, offset %#x out of range\n",
                stag, offset);
        return -EINVAL;
}
EXPORT_SYMBOL(cxgb4_read_tpte);

u64 cxgb4_read_sge_timestamp(struct net_device *dev)
{
        u32 hi, lo;
        struct adapter *adap;

        adap = netdev2adap(dev);
        lo = t4_read_reg(adap, SGE_TIMESTAMP_LO_A);
        hi = TSVAL_G(t4_read_reg(adap, SGE_TIMESTAMP_HI_A));

        return ((u64)hi << 32) | (u64)lo;
}
EXPORT_SYMBOL(cxgb4_read_sge_timestamp);

int cxgb4_bar2_sge_qregs(struct net_device *dev,
                         unsigned int qid,
                         enum cxgb4_bar2_qtype qtype,
                         int user,
                         u64 *pbar2_qoffset,
                         unsigned int *pbar2_qid)
{
        return t4_bar2_sge_qregs(netdev2adap(dev),
                                 qid,
                                 (qtype == CXGB4_BAR2_QTYPE_EGRESS
                                  ? T4_BAR2_QTYPE_EGRESS
                                  : T4_BAR2_QTYPE_INGRESS),
                                 user,
                                 pbar2_qoffset,
                                 pbar2_qid);
}
EXPORT_SYMBOL(cxgb4_bar2_sge_qregs);

static struct pci_driver cxgb4_driver;

static void check_neigh_update(struct neighbour *neigh)
{
        const struct device *parent;
        const struct net_device *netdev = neigh->dev;

        if (netdev->priv_flags & IFF_802_1Q_VLAN)
                netdev = vlan_dev_real_dev(netdev);
        parent = netdev->dev.parent;
        if (parent && parent->driver == &cxgb4_driver.driver)
                t4_l2t_update(dev_get_drvdata(parent), neigh);
}

static int netevent_cb(struct notifier_block *nb, unsigned long event,
                       void *data)
{
        switch (event) {
        case NETEVENT_NEIGH_UPDATE:
                check_neigh_update(data);
                break;
        case NETEVENT_REDIRECT:
        default:
                break;
        }
        return 0;
}

static bool netevent_registered;
static struct notifier_block cxgb4_netevent_nb = {
        .notifier_call = netevent_cb
};

static void drain_db_fifo(struct adapter *adap, int usecs)
{
        u32 v1, v2, lp_count, hp_count;

        do {
                v1 = t4_read_reg(adap, SGE_DBFIFO_STATUS_A);
                v2 = t4_read_reg(adap, SGE_DBFIFO_STATUS2_A);
                if (is_t4(adap->params.chip)) {
                        lp_count = LP_COUNT_G(v1);
                        hp_count = HP_COUNT_G(v1);
                } else {
                        lp_count = LP_COUNT_T5_G(v1);
                        hp_count = HP_COUNT_T5_G(v2);
                }

                if (lp_count == 0 && hp_count == 0)
                        break;
                set_current_state(TASK_UNINTERRUPTIBLE);
                schedule_timeout(usecs_to_jiffies(usecs));
        } while (1);
}

static void disable_txq_db(struct sge_txq *q)
{
        unsigned long flags;

        spin_lock_irqsave(&q->db_lock, flags);
        q->db_disabled = 1;
        spin_unlock_irqrestore(&q->db_lock, flags);
}

static void enable_txq_db(struct adapter *adap, struct sge_txq *q)
{
        spin_lock_irq(&q->db_lock);
        if (q->db_pidx_inc) {
                /* Make sure that all writes to the TX descriptors
                 * are committed before we tell HW about them.
                 */
                wmb();
                t4_write_reg(adap, MYPF_REG(SGE_PF_KDOORBELL_A),
                             QID_V(q->cntxt_id) | PIDX_V(q->db_pidx_inc));
                q->db_pidx_inc = 0;
        }
        q->db_disabled = 0;
        spin_unlock_irq(&q->db_lock);
}

static void disable_dbs(struct adapter *adap)
{
        int i;

        for_each_ethrxq(&adap->sge, i)
                disable_txq_db(&adap->sge.ethtxq[i].q);
        for_each_iscsirxq(&adap->sge, i)
                disable_txq_db(&adap->sge.ofldtxq[i].q);
        for_each_port(adap, i)
                disable_txq_db(&adap->sge.ctrlq[i].q);
}

static void enable_dbs(struct adapter *adap)
{
        int i;

        for_each_ethrxq(&adap->sge, i)
                enable_txq_db(adap, &adap->sge.ethtxq[i].q);
        for_each_iscsirxq(&adap->sge, i)
                enable_txq_db(adap, &adap->sge.ofldtxq[i].q);
        for_each_port(adap, i)
                enable_txq_db(adap, &adap->sge.ctrlq[i].q);
}

static void notify_rdma_uld(struct adapter *adap, enum cxgb4_control cmd)
{
        if (adap->uld_handle[CXGB4_ULD_RDMA])
                ulds[CXGB4_ULD_RDMA].control(adap->uld_handle[CXGB4_ULD_RDMA],
                                cmd);
}

static void process_db_full(struct work_struct *work)
{
        struct adapter *adap;

        adap = container_of(work, struct adapter, db_full_task);

        drain_db_fifo(adap, dbfifo_drain_delay);
        enable_dbs(adap);
        notify_rdma_uld(adap, CXGB4_CONTROL_DB_EMPTY);
        if (CHELSIO_CHIP_VERSION(adap->params.chip) <= CHELSIO_T5)
                t4_set_reg_field(adap, SGE_INT_ENABLE3_A,
                                 DBFIFO_HP_INT_F | DBFIFO_LP_INT_F,
                                 DBFIFO_HP_INT_F | DBFIFO_LP_INT_F);
        else
                t4_set_reg_field(adap, SGE_INT_ENABLE3_A,
                                 DBFIFO_LP_INT_F, DBFIFO_LP_INT_F);
}

static void sync_txq_pidx(struct adapter *adap, struct sge_txq *q)
{
        u16 hw_pidx, hw_cidx;
        int ret;

        spin_lock_irq(&q->db_lock);
        ret = read_eq_indices(adap, (u16)q->cntxt_id, &hw_pidx, &hw_cidx);
        if (ret)
                goto out;
        if (q->db_pidx != hw_pidx) {
                u16 delta;
                u32 val;

                if (q->db_pidx >= hw_pidx)
                        delta = q->db_pidx - hw_pidx;
                else
                        delta = q->size - hw_pidx + q->db_pidx;

                if (is_t4(adap->params.chip))
                        val = PIDX_V(delta);
                else
                        val = PIDX_T5_V(delta);
                wmb();
                t4_write_reg(adap, MYPF_REG(SGE_PF_KDOORBELL_A),
                             QID_V(q->cntxt_id) | val);
        }
out:
        q->db_disabled = 0;
        q->db_pidx_inc = 0;
        spin_unlock_irq(&q->db_lock);
        if (ret)
                CH_WARN(adap, "DB drop recovery failed.\n");
}
static void recover_all_queues(struct adapter *adap)
{
        int i;

        for_each_ethrxq(&adap->sge, i)
                sync_txq_pidx(adap, &adap->sge.ethtxq[i].q);
        for_each_iscsirxq(&adap->sge, i)
                sync_txq_pidx(adap, &adap->sge.ofldtxq[i].q);
        for_each_port(adap, i)
                sync_txq_pidx(adap, &adap->sge.ctrlq[i].q);
}

static void process_db_drop(struct work_struct *work)
{
        struct adapter *adap;

        adap = container_of(work, struct adapter, db_drop_task);

        if (is_t4(adap->params.chip)) {
                drain_db_fifo(adap, dbfifo_drain_delay);
                notify_rdma_uld(adap, CXGB4_CONTROL_DB_DROP);
                drain_db_fifo(adap, dbfifo_drain_delay);
                recover_all_queues(adap);
                drain_db_fifo(adap, dbfifo_drain_delay);
                enable_dbs(adap);
                notify_rdma_uld(adap, CXGB4_CONTROL_DB_EMPTY);
        } else if (is_t5(adap->params.chip)) {
                u32 dropped_db = t4_read_reg(adap, 0x010ac);
                u16 qid = (dropped_db >> 15) & 0x1ffff;
                u16 pidx_inc = dropped_db & 0x1fff;
                u64 bar2_qoffset;
                unsigned int bar2_qid;
                int ret;

                ret = t4_bar2_sge_qregs(adap, qid, T4_BAR2_QTYPE_EGRESS,
                                        0, &bar2_qoffset, &bar2_qid);
                if (ret)
                        dev_err(adap->pdev_dev, "doorbell drop recovery: "
                                "qid=%d, pidx_inc=%d\n", qid, pidx_inc);
                else
                        writel(PIDX_T5_V(pidx_inc) | QID_V(bar2_qid),
                               adap->bar2 + bar2_qoffset + SGE_UDB_KDOORBELL);

                /* Re-enable BAR2 WC */
                t4_set_reg_field(adap, 0x10b0, 1<<15, 1<<15);
        }

        if (CHELSIO_CHIP_VERSION(adap->params.chip) <= CHELSIO_T5)
                t4_set_reg_field(adap, SGE_DOORBELL_CONTROL_A, DROPPED_DB_F, 0);
}

void t4_db_full(struct adapter *adap)
{
        if (is_t4(adap->params.chip)) {
                disable_dbs(adap);
                notify_rdma_uld(adap, CXGB4_CONTROL_DB_FULL);
                t4_set_reg_field(adap, SGE_INT_ENABLE3_A,
                                 DBFIFO_HP_INT_F | DBFIFO_LP_INT_F, 0);
                queue_work(adap->workq, &adap->db_full_task);
        }
}

void t4_db_dropped(struct adapter *adap)
{
        if (is_t4(adap->params.chip)) {
                disable_dbs(adap);
                notify_rdma_uld(adap, CXGB4_CONTROL_DB_FULL);
        }
        queue_work(adap->workq, &adap->db_drop_task);
}

static void uld_attach(struct adapter *adap, unsigned int uld)
{
        void *handle;
        struct cxgb4_lld_info lli;
        unsigned short i;

        lli.pdev = adap->pdev;
        lli.pf = adap->pf;
        lli.l2t = adap->l2t;
        lli.tids = &adap->tids;
        lli.ports = adap->port;
        lli.vr = &adap->vres;
        lli.mtus = adap->params.mtus;
        if (uld == CXGB4_ULD_RDMA) {
                lli.rxq_ids = adap->sge.rdma_rxq;
                lli.ciq_ids = adap->sge.rdma_ciq;
                lli.nrxq = adap->sge.rdmaqs;
                lli.nciq = adap->sge.rdmaciqs;
        } else if (uld == CXGB4_ULD_ISCSI) {
                lli.rxq_ids = adap->sge.iscsi_rxq;
                lli.nrxq = adap->sge.iscsiqsets;
        } else if (uld == CXGB4_ULD_ISCSIT) {
                lli.rxq_ids = adap->sge.iscsit_rxq;
                lli.nrxq = adap->sge.niscsitq;
        }
        lli.ntxq = adap->sge.iscsiqsets;
        lli.nchan = adap->params.nports;
        lli.nports = adap->params.nports;
        lli.wr_cred = adap->params.ofldq_wr_cred;
        lli.adapter_type = adap->params.chip;
        lli.iscsi_iolen = MAXRXDATA_G(t4_read_reg(adap, TP_PARA_REG2_A));
        lli.iscsi_tagmask = t4_read_reg(adap, ULP_RX_ISCSI_TAGMASK_A);
        lli.iscsi_pgsz_order = t4_read_reg(adap, ULP_RX_ISCSI_PSZ_A);
        lli.iscsi_llimit = t4_read_reg(adap, ULP_RX_ISCSI_LLIMIT_A);
        lli.iscsi_ppm = &adap->iscsi_ppm;
        lli.cclk_ps = 1000000000 / adap->params.vpd.cclk;
        lli.udb_density = 1 << adap->params.sge.eq_qpp;
        lli.ucq_density = 1 << adap->params.sge.iq_qpp;
        lli.filt_mode = adap->params.tp.vlan_pri_map;
        /* MODQ_REQ_MAP sets queues 0-3 to chan 0-3 */
        for (i = 0; i < NCHAN; i++)
                lli.tx_modq[i] = i;
        lli.gts_reg = adap->regs + MYPF_REG(SGE_PF_GTS_A);
        lli.db_reg = adap->regs + MYPF_REG(SGE_PF_KDOORBELL_A);
        lli.fw_vers = adap->params.fw_vers;
        lli.dbfifo_int_thresh = dbfifo_int_thresh;
        lli.sge_ingpadboundary = adap->sge.fl_align;
        lli.sge_egrstatuspagesize = adap->sge.stat_len;
        lli.sge_pktshift = adap->sge.pktshift;
        lli.enable_fw_ofld_conn = adap->flags & FW_OFLD_CONN;
        lli.max_ordird_qp = adap->params.max_ordird_qp;
        lli.max_ird_adapter = adap->params.max_ird_adapter;
        lli.ulptx_memwrite_dsgl = adap->params.ulptx_memwrite_dsgl;
        lli.nodeid = dev_to_node(adap->pdev_dev);

        handle = ulds[uld].add(&lli);
        if (IS_ERR(handle)) {
                dev_warn(adap->pdev_dev,
                         "could not attach to the %s driver, error %ld\n",
                         uld_str[uld], PTR_ERR(handle));
                return;
        }

        adap->uld_handle[uld] = handle;

        if (!netevent_registered) {
                register_netevent_notifier(&cxgb4_netevent_nb);
                netevent_registered = true;
        }

        if (adap->flags & FULL_INIT_DONE)
                ulds[uld].state_change(handle, CXGB4_STATE_UP);
}

static void attach_ulds(struct adapter *adap)
{
        unsigned int i;

        spin_lock(&adap_rcu_lock);
        list_add_tail_rcu(&adap->rcu_node, &adap_rcu_list);
        spin_unlock(&adap_rcu_lock);

        mutex_lock(&uld_mutex);
        list_add_tail(&adap->list_node, &adapter_list);
        for (i = 0; i < CXGB4_ULD_MAX; i++)
                if (ulds[i].add)
                        uld_attach(adap, i);
        mutex_unlock(&uld_mutex);
}

static void detach_ulds(struct adapter *adap)
{
        unsigned int i;

        mutex_lock(&uld_mutex);
        list_del(&adap->list_node);
        for (i = 0; i < CXGB4_ULD_MAX; i++)
                if (adap->uld_handle[i]) {
                        ulds[i].state_change(adap->uld_handle[i],
                                             CXGB4_STATE_DETACH);
                        adap->uld_handle[i] = NULL;
                }
        for (i = 0; i < CXGB4_PCI_ULD_MAX; i++)
                if (adap->uld && adap->uld[i].handle) {
                        adap->uld[i].state_change(adap->uld[i].handle,
                                             CXGB4_STATE_DETACH);
                        adap->uld[i].handle = NULL;
                }
        if (netevent_registered && list_empty(&adapter_list)) {
                unregister_netevent_notifier(&cxgb4_netevent_nb);
                netevent_registered = false;
        }
        mutex_unlock(&uld_mutex);

        spin_lock(&adap_rcu_lock);
        list_del_rcu(&adap->rcu_node);
        spin_unlock(&adap_rcu_lock);
}

static void notify_ulds(struct adapter *adap, enum cxgb4_state new_state)
{
        unsigned int i;

        mutex_lock(&uld_mutex);
        for (i = 0; i < CXGB4_ULD_MAX; i++)
                if (adap->uld_handle[i])
                        ulds[i].state_change(adap->uld_handle[i], new_state);
        for (i = 0; i < CXGB4_PCI_ULD_MAX; i++)
                if (adap->uld && adap->uld[i].handle)
                        adap->uld[i].state_change(adap->uld[i].handle,
                                                  new_state);
        mutex_unlock(&uld_mutex);
}

/**
 *      cxgb4_register_uld - register an upper-layer driver
 *      @type: the ULD type
 *      @p: the ULD methods
 *
 *      Registers an upper-layer driver with this driver and notifies the ULD
 *      about any presently available devices that support its type.  Returns
 *      %-EBUSY if a ULD of the same type is already registered.
 */
int cxgb4_register_uld(enum cxgb4_uld type, const struct cxgb4_uld_info *p)
{
        int ret = 0;
        struct adapter *adap;

        if (type >= CXGB4_ULD_MAX)
                return -EINVAL;
        mutex_lock(&uld_mutex);
        if (ulds[type].add) {
                ret = -EBUSY;
                goto out;
        }
        ulds[type] = *p;
        list_for_each_entry(adap, &adapter_list, list_node)
                uld_attach(adap, type);
out:    mutex_unlock(&uld_mutex);
        return ret;
}
EXPORT_SYMBOL(cxgb4_register_uld);

/**
 *      cxgb4_unregister_uld - unregister an upper-layer driver
 *      @type: the ULD type
 *
 *      Unregisters an existing upper-layer driver.
 */
int cxgb4_unregister_uld(enum cxgb4_uld type)
{
        struct adapter *adap;

        if (type >= CXGB4_ULD_MAX)
                return -EINVAL;
        mutex_lock(&uld_mutex);
        list_for_each_entry(adap, &adapter_list, list_node)
                adap->uld_handle[type] = NULL;
        ulds[type].add = NULL;
        mutex_unlock(&uld_mutex);
        return 0;
}
EXPORT_SYMBOL(cxgb4_unregister_uld);

#if IS_ENABLED(CONFIG_IPV6)
static int cxgb4_inet6addr_handler(struct notifier_block *this,
                                   unsigned long event, void *data)
{
        struct inet6_ifaddr *ifa = data;
        struct net_device *event_dev = ifa->idev->dev;
        const struct device *parent = NULL;
#if IS_ENABLED(CONFIG_BONDING)
        struct adapter *adap;
#endif
        if (event_dev->priv_flags & IFF_802_1Q_VLAN)
                event_dev = vlan_dev_real_dev(event_dev);
#if IS_ENABLED(CONFIG_BONDING)
        if (event_dev->flags & IFF_MASTER) {
                list_for_each_entry(adap, &adapter_list, list_node) {
                        switch (event) {
                        case NETDEV_UP:
                                cxgb4_clip_get(adap->port[0],
                                               (const u32 *)ifa, 1);
                                break;
                        case NETDEV_DOWN:
                                cxgb4_clip_release(adap->port[0],
                                                   (const u32 *)ifa, 1);
                                break;
                        default:
                                break;
                        }
                }
                return NOTIFY_OK;
        }
#endif

        if (event_dev)
                parent = event_dev->dev.parent;

        if (parent && parent->driver == &cxgb4_driver.driver) {
                switch (event) {
                case NETDEV_UP:
                        cxgb4_clip_get(event_dev, (const u32 *)ifa, 1);
                        break;
                case NETDEV_DOWN:
                        cxgb4_clip_release(event_dev, (const u32 *)ifa, 1);
                        break;
                default:
                        break;
                }
        }
        return NOTIFY_OK;
}

static bool inet6addr_registered;
static struct notifier_block cxgb4_inet6addr_notifier = {
        .notifier_call = cxgb4_inet6addr_handler
};

static void update_clip(const struct adapter *adap)
{
        int i;
        struct net_device *dev;
        int ret;

        rcu_read_lock();

        for (i = 0; i < MAX_NPORTS; i++) {
                dev = adap->port[i];
                ret = 0;

                if (dev)
                        ret = cxgb4_update_root_dev_clip(dev);

                if (ret < 0)
                        break;
        }
        rcu_read_unlock();
}
#endif /* IS_ENABLED(CONFIG_IPV6) */

/**
 *      cxgb_up - enable the adapter
 *      @adap: adapter being enabled
 *
 *      Called when the first port is enabled, this function performs the
 *      actions necessary to make an adapter operational, such as completing
 *      the initialization of HW modules, and enabling interrupts.
 *
 *      Must be called with the rtnl lock held.
 */
static int cxgb_up(struct adapter *adap)
{
        int err;

        err = setup_sge_queues(adap);
        if (err)
                goto out;
        err = setup_rss(adap);
        if (err)
                goto freeq;

        if (adap->flags & USING_MSIX) {
                name_msix_vecs(adap);
                err = request_irq(adap->msix_info[0].vec, t4_nondata_intr, 0,
                                  adap->msix_info[0].desc, adap);
                if (err)
                        goto irq_err;

                err = request_msix_queue_irqs(adap);
                if (err) {
                        free_irq(adap->msix_info[0].vec, adap);
                        goto irq_err;
                }
        } else {
                err = request_irq(adap->pdev->irq, t4_intr_handler(adap),
                                  (adap->flags & USING_MSI) ? 0 : IRQF_SHARED,
                                  adap->port[0]->name, adap);
                if (err)
                        goto irq_err;
        }
        enable_rx(adap);
        t4_sge_start(adap);
        t4_intr_enable(adap);
        adap->flags |= FULL_INIT_DONE;
        notify_ulds(adap, CXGB4_STATE_UP);
#if IS_ENABLED(CONFIG_IPV6)
        update_clip(adap);
#endif
        /* Initialize hash mac addr list*/
        INIT_LIST_HEAD(&adap->mac_hlist);
 out:
        return err;
 irq_err:
        dev_err(adap->pdev_dev, "request_irq failed, err %d\n", err);
 freeq:
        t4_free_sge_resources(adap);
        goto out;
}

static void cxgb_down(struct adapter *adapter)
{
        cancel_work_sync(&adapter->tid_release_task);
        cancel_work_sync(&adapter->db_full_task);
        cancel_work_sync(&adapter->db_drop_task);
        adapter->tid_release_task_busy = false;
        adapter->tid_release_head = NULL;

        t4_sge_stop(adapter);
        t4_free_sge_resources(adapter);
        adapter->flags &= ~FULL_INIT_DONE;
}

/*
 * net_device operations
 */
static int cxgb_open(struct net_device *dev)
{
        int err;
        struct port_info *pi = netdev_priv(dev);
        struct adapter *adapter = pi->adapter;

        netif_carrier_off(dev);

        if (!(adapter->flags & FULL_INIT_DONE)) {
                err = cxgb_up(adapter);
                if (err < 0)
                        return err;
        }

        err = link_start(dev);
        if (!err)
                netif_tx_start_all_queues(dev);
        return err;
}

static int cxgb_close(struct net_device *dev)
{
        struct port_info *pi = netdev_priv(dev);
        struct adapter *adapter = pi->adapter;

        netif_tx_stop_all_queues(dev);
        netif_carrier_off(dev);
        return t4_enable_vi(adapter, adapter->pf, pi->viid, false, false);
}

/* Return an error number if the indicated filter isn't writable ...
 */
static int writable_filter(struct filter_entry *f)
{
        if (f->locked)
                return -EPERM;
        if (f->pending)
                return -EBUSY;

        return 0;
}

/* Delete the filter at the specified index (if valid).  The checks for all
 * the common problems with doing this like the filter being locked, currently
 * pending in another operation, etc.
 */
static int delete_filter(struct adapter *adapter, unsigned int fidx)
{
        struct filter_entry *f;
        int ret;

        if (fidx >= adapter->tids.nftids + adapter->tids.nsftids)
                return -EINVAL;

        f = &adapter->tids.ftid_tab[fidx];
        ret = writable_filter(f);
        if (ret)
                return ret;
        if (f->valid)
                return del_filter_wr(adapter, fidx);

        return 0;
}

int cxgb4_create_server_filter(const struct net_device *dev, unsigned int stid,
                __be32 sip, __be16 sport, __be16 vlan,
                unsigned int queue, unsigned char port, unsigned char mask)
{
        int ret;
        struct filter_entry *f;
        struct adapter *adap;
        int i;
        u8 *val;

        adap = netdev2adap(dev);

        /* Adjust stid to correct filter index */
        stid -= adap->tids.sftid_base;
        stid += adap->tids.nftids;

        /* Check to make sure the filter requested is writable ...
         */
        f = &adap->tids.ftid_tab[stid];
        ret = writable_filter(f);
        if (ret)
                return ret;

        /* Clear out any old resources being used by the filter before
         * we start constructing the new filter.
         */
        if (f->valid)
                clear_filter(adap, f);

        /* Clear out filter specifications */
        memset(&f->fs, 0, sizeof(struct ch_filter_specification));
        f->fs.val.lport = cpu_to_be16(sport);
        f->fs.mask.lport  = ~0;
        val = (u8 *)&sip;
        if ((val[0] | val[1] | val[2] | val[3]) != 0) {
                for (i = 0; i < 4; i++) {
                        f->fs.val.lip[i] = val[i];
                        f->fs.mask.lip[i] = ~0;
                }
                if (adap->params.tp.vlan_pri_map & PORT_F) {
                        f->fs.val.iport = port;
                        f->fs.mask.iport = mask;
                }
        }

        if (adap->params.tp.vlan_pri_map & PROTOCOL_F) {
                f->fs.val.proto = IPPROTO_TCP;
                f->fs.mask.proto = ~0;
        }

        f->fs.dirsteer = 1;
        f->fs.iq = queue;
        /* Mark filter as locked */
        f->locked = 1;
        f->fs.rpttid = 1;

        ret = set_filter_wr(adap, stid);
        if (ret) {
                clear_filter(adap, f);
                return ret;
        }

        return 0;
}
EXPORT_SYMBOL(cxgb4_create_server_filter);

int cxgb4_remove_server_filter(const struct net_device *dev, unsigned int stid,
                unsigned int queue, bool ipv6)
{
        struct filter_entry *f;
        struct adapter *adap;

        adap = netdev2adap(dev);

        /* Adjust stid to correct filter index */
        stid -= adap->tids.sftid_base;
        stid += adap->tids.nftids;

        f = &adap->tids.ftid_tab[stid];
        /* Unlock the filter */
        f->locked = 0;

        return delete_filter(adap, stid);
}
EXPORT_SYMBOL(cxgb4_remove_server_filter);

static struct rtnl_link_stats64 *cxgb_get_stats(struct net_device *dev,
                                                struct rtnl_link_stats64 *ns)
{
        struct port_stats stats;
        struct port_info *p = netdev_priv(dev);
        struct adapter *adapter = p->adapter;

        /* Block retrieving statistics during EEH error
         * recovery. Otherwise, the recovery might fail
         * and the PCI device will be removed permanently
         */
        spin_lock(&adapter->stats_lock);
        if (!netif_device_present(dev)) {
                spin_unlock(&adapter->stats_lock);
                return ns;
        }
        t4_get_port_stats_offset(adapter, p->tx_chan, &stats,
                                 &p->stats_base);
        spin_unlock(&adapter->stats_lock);

        ns->tx_bytes   = stats.tx_octets;
        ns->tx_packets = stats.tx_frames;
        ns->rx_bytes   = stats.rx_octets;
        ns->rx_packets = stats.rx_frames;
        ns->multicast  = stats.rx_mcast_frames;

        /* detailed rx_errors */
        ns->rx_length_errors = stats.rx_jabber + stats.rx_too_long +
                               stats.rx_runt;
        ns->rx_over_errors   = 0;
        ns->rx_crc_errors    = stats.rx_fcs_err;
        ns->rx_frame_errors  = stats.rx_symbol_err;
        ns->rx_fifo_errors   = stats.rx_ovflow0 + stats.rx_ovflow1 +
                               stats.rx_ovflow2 + stats.rx_ovflow3 +
                               stats.rx_trunc0 + stats.rx_trunc1 +
                               stats.rx_trunc2 + stats.rx_trunc3;
        ns->rx_missed_errors = 0;

        /* detailed tx_errors */
        ns->tx_aborted_errors   = 0;
        ns->tx_carrier_errors   = 0;
        ns->tx_fifo_errors      = 0;
        ns->tx_heartbeat_errors = 0;
        ns->tx_window_errors    = 0;

        ns->tx_errors = stats.tx_error_frames;
        ns->rx_errors = stats.rx_symbol_err + stats.rx_fcs_err +
                ns->rx_length_errors + stats.rx_len_err + ns->rx_fifo_errors;
        return ns;
}

static int cxgb_ioctl(struct net_device *dev, struct ifreq *req, int cmd)
{
        unsigned int mbox;
        int ret = 0, prtad, devad;
        struct port_info *pi = netdev_priv(dev);
        struct mii_ioctl_data *data = (struct mii_ioctl_data *)&req->ifr_data;

        switch (cmd) {
        case SIOCGMIIPHY:
                if (pi->mdio_addr < 0)
                        return -EOPNOTSUPP;
                data->phy_id = pi->mdio_addr;
                break;
        case SIOCGMIIREG:
        case SIOCSMIIREG:
                if (mdio_phy_id_is_c45(data->phy_id)) {
                        prtad = mdio_phy_id_prtad(data->phy_id);
                        devad = mdio_phy_id_devad(data->phy_id);
                } else if (data->phy_id < 32) {
                        prtad = data->phy_id;
                        devad = 0;
                        data->reg_num &= 0x1f;
                } else
                        return -EINVAL;

                mbox = pi->adapter->pf;
                if (cmd == SIOCGMIIREG)
                        ret = t4_mdio_rd(pi->adapter, mbox, prtad, devad,
                                         data->reg_num, &data->val_out);
                else
                        ret = t4_mdio_wr(pi->adapter, mbox, prtad, devad,
                                         data->reg_num, data->val_in);
                break;
        case SIOCGHWTSTAMP:
                return copy_to_user(req->ifr_data, &pi->tstamp_config,
                                    sizeof(pi->tstamp_config)) ?
                        -EFAULT : 0;
        case SIOCSHWTSTAMP:
                if (copy_from_user(&pi->tstamp_config, req->ifr_data,
                                   sizeof(pi->tstamp_config)))
                        return -EFAULT;

                switch (pi->tstamp_config.rx_filter) {
                case HWTSTAMP_FILTER_NONE:
                        pi->rxtstamp = false;
                        break;
                case HWTSTAMP_FILTER_ALL:
                        pi->rxtstamp = true;
                        break;
                default:
                        pi->tstamp_config.rx_filter = HWTSTAMP_FILTER_NONE;
                        return -ERANGE;
                }

                return copy_to_user(req->ifr_data, &pi->tstamp_config,
                                    sizeof(pi->tstamp_config)) ?
                        -EFAULT : 0;
        default:
                return -EOPNOTSUPP;
        }
        return ret;
}

static void cxgb_set_rxmode(struct net_device *dev)
{
        /* unfortunately we can't return errors to the stack */
        set_rxmode(dev, -1, false);
}

static int cxgb_change_mtu(struct net_device *dev, int new_mtu)
{
        int ret;
        struct port_info *pi = netdev_priv(dev);

        if (new_mtu < 81 || new_mtu > MAX_MTU)         /* accommodate SACK */
                return -EINVAL;
        ret = t4_set_rxmode(pi->adapter, pi->adapter->pf, pi->viid, new_mtu, -1,
                            -1, -1, -1, true);
        if (!ret)
                dev->mtu = new_mtu;
        return ret;
}

#ifdef CONFIG_PCI_IOV
static int dummy_open(struct net_device *dev)
{
        /* Turn carrier off since we don't have to transmit anything on this
         * interface.
         */
        netif_carrier_off(dev);
        return 0;
}

/* Fill MAC address that will be assigned by the FW */
static void fill_vf_station_mac_addr(struct adapter *adap)
{
        unsigned int i;
        u8 hw_addr[ETH_ALEN], macaddr[ETH_ALEN];
        int err;
        u8 *na;
        u16 a, b;

        err = t4_get_raw_vpd_params(adap, &adap->params.vpd);
        if (!err) {
                na = adap->params.vpd.na;
                for (i = 0; i < ETH_ALEN; i++)
                        hw_addr[i] = (hex2val(na[2 * i + 0]) * 16 +
                                      hex2val(na[2 * i + 1]));
                a = (hw_addr[0] << 8) | hw_addr[1];
                b = (hw_addr[1] << 8) | hw_addr[2];
                a ^= b;
                a |= 0x0200;    /* locally assigned Ethernet MAC address */
                a &= ~0x0100;   /* not a multicast Ethernet MAC address */
                macaddr[0] = a >> 8;
                macaddr[1] = a & 0xff;

                for (i = 2; i < 5; i++)
                        macaddr[i] = hw_addr[i + 1];

                for (i = 0; i < adap->num_vfs; i++) {
                        macaddr[5] = adap->pf * 16 + i;
                        ether_addr_copy(adap->vfinfo[i].vf_mac_addr, macaddr);
                }
        }
}

static int cxgb_set_vf_mac(struct net_device *dev, int vf, u8 *mac)
{
        struct port_info *pi = netdev_priv(dev);
        struct adapter *adap = pi->adapter;
        int ret;

        /* verify MAC addr is valid */
        if (!is_valid_ether_addr(mac)) {
                dev_err(pi->adapter->pdev_dev,
                        "Invalid Ethernet address %pM for VF %d\n",
                        mac, vf);
                return -EINVAL;
        }

        dev_info(pi->adapter->pdev_dev,
                 "Setting MAC %pM on VF %d\n", mac, vf);
        ret = t4_set_vf_mac_acl(adap, vf + 1, 1, mac);
        if (!ret)
                ether_addr_copy(adap->vfinfo[vf].vf_mac_addr, mac);
        return ret;
}

static int cxgb_get_vf_config(struct net_device *dev,
                              int vf, struct ifla_vf_info *ivi)
{
        struct port_info *pi = netdev_priv(dev);
        struct adapter *adap = pi->adapter;

        if (vf >= adap->num_vfs)
                return -EINVAL;
        ivi->vf = vf;
        ether_addr_copy(ivi->mac, adap->vfinfo[vf].vf_mac_addr);
        return 0;
}
#endif

static int cxgb_set_mac_addr(struct net_device *dev, void *p)
{
        int ret;
        struct sockaddr *addr = p;
        struct port_info *pi = netdev_priv(dev);

        if (!is_valid_ether_addr(addr->sa_data))
                return -EADDRNOTAVAIL;

        ret = t4_change_mac(pi->adapter, pi->adapter->pf, pi->viid,
                            pi->xact_addr_filt, addr->sa_data, true, true);
        if (ret < 0)
                return ret;

        memcpy(dev->dev_addr, addr->sa_data, dev->addr_len);
        pi->xact_addr_filt = ret;
        return 0;
}

#ifdef CONFIG_NET_POLL_CONTROLLER
static void cxgb_netpoll(struct net_device *dev)
{
        struct port_info *pi = netdev_priv(dev);
        struct adapter *adap = pi->adapter;

        if (adap->flags & USING_MSIX) {
                int i;
                struct sge_eth_rxq *rx = &adap->sge.ethrxq[pi->first_qset];

                for (i = pi->nqsets; i; i--, rx++)
                        t4_sge_intr_msix(0, &rx->rspq);
        } else
                t4_intr_handler(adap)(0, adap);
}
#endif

static int cxgb_set_tx_maxrate(struct net_device *dev, int index, u32 rate)
{
        struct port_info *pi = netdev_priv(dev);
        struct adapter *adap = pi->adapter;
        struct sched_class *e;
        struct ch_sched_params p;
        struct ch_sched_queue qe;
        u32 req_rate;
        int err = 0;

        if (!can_sched(dev))
                return -ENOTSUPP;

        if (index < 0 || index > pi->nqsets - 1)
                return -EINVAL;

        if (!(adap->flags & FULL_INIT_DONE)) {
                dev_err(adap->pdev_dev,
                        "Failed to rate limit on queue %d. Link Down?\n",
                        index);
                return -EINVAL;
        }

        /* Convert from Mbps to Kbps */
        req_rate = rate << 10;

        /* Max rate is 10 Gbps */
        if (req_rate >= SCHED_MAX_RATE_KBPS) {
                dev_err(adap->pdev_dev,
                        "Invalid rate %u Mbps, Max rate is %u Gbps\n",
                        rate, SCHED_MAX_RATE_KBPS);
                return -ERANGE;
        }

        /* First unbind the queue from any existing class */
        memset(&qe, 0, sizeof(qe));
        qe.queue = index;
        qe.class = SCHED_CLS_NONE;

        err = cxgb4_sched_class_unbind(dev, (void *)(&qe), SCHED_QUEUE);
        if (err) {
                dev_err(adap->pdev_dev,
                        "Unbinding Queue %d on port %d fail. Err: %d\n",
                        index, pi->port_id, err);
                return err;
        }

        /* Queue already unbound */
        if (!req_rate)
                return 0;

        /* Fetch any available unused or matching scheduling class */
        memset(&p, 0, sizeof(p));
        p.type = SCHED_CLASS_TYPE_PACKET;
        p.u.params.level    = SCHED_CLASS_LEVEL_CL_RL;
        p.u.params.mode     = SCHED_CLASS_MODE_CLASS;
        p.u.params.rateunit = SCHED_CLASS_RATEUNIT_BITS;
        p.u.params.ratemode = SCHED_CLASS_RATEMODE_ABS;
        p.u.params.channel  = pi->tx_chan;
        p.u.params.class    = SCHED_CLS_NONE;
        p.u.params.minrate  = 0;
        p.u.params.maxrate  = req_rate;
        p.u.params.weight   = 0;
        p.u.params.pktsize  = dev->mtu;

        e = cxgb4_sched_class_alloc(dev, &p);
        if (!e)
                return -ENOMEM;

        /* Bind the queue to a scheduling class */
        memset(&qe, 0, sizeof(qe));
        qe.queue = index;
        qe.class = e->idx;

        err = cxgb4_sched_class_bind(dev, (void *)(&qe), SCHED_QUEUE);
        if (err)
                dev_err(adap->pdev_dev,
                        "Queue rate limiting failed. Err: %d\n", err);
        return err;
}

static const struct net_device_ops cxgb4_netdev_ops = {
        .ndo_open             = cxgb_open,
        .ndo_stop             = cxgb_close,
        .ndo_start_xmit       = t4_eth_xmit,
        .ndo_select_queue     = cxgb_select_queue,
        .ndo_get_stats64      = cxgb_get_stats,
        .ndo_set_rx_mode      = cxgb_set_rxmode,
        .ndo_set_mac_address  = cxgb_set_mac_addr,
        .ndo_set_features     = cxgb_set_features,
        .ndo_validate_addr    = eth_validate_addr,
        .ndo_do_ioctl         = cxgb_ioctl,
        .ndo_change_mtu       = cxgb_change_mtu,
#ifdef CONFIG_NET_POLL_CONTROLLER
        .ndo_poll_controller  = cxgb_netpoll,
#endif
#ifdef CONFIG_CHELSIO_T4_FCOE
        .ndo_fcoe_enable      = cxgb_fcoe_enable,
        .ndo_fcoe_disable     = cxgb_fcoe_disable,
#endif /* CONFIG_CHELSIO_T4_FCOE */
#ifdef CONFIG_NET_RX_BUSY_POLL
        .ndo_busy_poll        = cxgb_busy_poll,
#endif
        .ndo_set_tx_maxrate   = cxgb_set_tx_maxrate,
};

#ifdef CONFIG_PCI_IOV
static const struct net_device_ops cxgb4_mgmt_netdev_ops = {
        .ndo_open             = dummy_open,
        .ndo_set_vf_mac       = cxgb_set_vf_mac,
        .ndo_get_vf_config    = cxgb_get_vf_config,
};
#endif

static void get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info)
{
        struct adapter *adapter = netdev2adap(dev);

        strlcpy(info->driver, cxgb4_driver_name, sizeof(info->driver));
        strlcpy(info->version, cxgb4_driver_version,
                sizeof(info->version));
        strlcpy(info->bus_info, pci_name(adapter->pdev),
                sizeof(info->bus_info));
}

static const struct ethtool_ops cxgb4_mgmt_ethtool_ops = {
        .get_drvinfo       = get_drvinfo,
};

void t4_fatal_err(struct adapter *adap)
{
        t4_set_reg_field(adap, SGE_CONTROL_A, GLOBALENABLE_F, 0);
        t4_intr_disable(adap);
        dev_alert(adap->pdev_dev, "encountered fatal error, adapter stopped\n");
}

static void setup_memwin(struct adapter *adap)
{
        u32 nic_win_base = t4_get_util_window(adap);

        t4_setup_memwin(adap, nic_win_base, MEMWIN_NIC);
}

static void setup_memwin_rdma(struct adapter *adap)
{
        if (adap->vres.ocq.size) {
                u32 start;
                unsigned int sz_kb;

                start = t4_read_pcie_cfg4(adap, PCI_BASE_ADDRESS_2);
                start &= PCI_BASE_ADDRESS_MEM_MASK;
                start += OCQ_WIN_OFFSET(adap->pdev, &adap->vres);
                sz_kb = roundup_pow_of_two(adap->vres.ocq.size) >> 10;
                t4_write_reg(adap,
                             PCIE_MEM_ACCESS_REG(PCIE_MEM_ACCESS_BASE_WIN_A, 3),
                             start | BIR_V(1) | WINDOW_V(ilog2(sz_kb)));
                t4_write_reg(adap,
                             PCIE_MEM_ACCESS_REG(PCIE_MEM_ACCESS_OFFSET_A, 3),
                             adap->vres.ocq.start);
                t4_read_reg(adap,
                            PCIE_MEM_ACCESS_REG(PCIE_MEM_ACCESS_OFFSET_A, 3));
        }
}

static int adap_init1(struct adapter *adap, struct fw_caps_config_cmd *c)
{
        u32 v;
        int ret;

        /* get device capabilities */
        memset(c, 0, sizeof(*c));
        c->op_to_write = htonl(FW_CMD_OP_V(FW_CAPS_CONFIG_CMD) |
                               FW_CMD_REQUEST_F | FW_CMD_READ_F);
        c->cfvalid_to_len16 = htonl(FW_LEN16(*c));
        ret = t4_wr_mbox(adap, adap->mbox, c, sizeof(*c), c);
        if (ret < 0)
                return ret;

        c->op_to_write = htonl(FW_CMD_OP_V(FW_CAPS_CONFIG_CMD) |
                               FW_CMD_REQUEST_F | FW_CMD_WRITE_F);
        ret = t4_wr_mbox(adap, adap->mbox, c, sizeof(*c), NULL);
        if (ret < 0)
                return ret;

        ret = t4_config_glbl_rss(adap, adap->pf,
                                 FW_RSS_GLB_CONFIG_CMD_MODE_BASICVIRTUAL,
                                 FW_RSS_GLB_CONFIG_CMD_TNLMAPEN_F |
                                 FW_RSS_GLB_CONFIG_CMD_TNLALLLKP_F);
        if (ret < 0)
                return ret;

        ret = t4_cfg_pfvf(adap, adap->mbox, adap->pf, 0, adap->sge.egr_sz, 64,
                          MAX_INGQ, 0, 0, 4, 0xf, 0xf, 16, FW_CMD_CAP_PF,
                          FW_CMD_CAP_PF);
        if (ret < 0)
                return ret;

        t4_sge_init(adap);

        /* tweak some settings */
        t4_write_reg(adap, TP_SHIFT_CNT_A, 0x64f8849);
        t4_write_reg(adap, ULP_RX_TDDP_PSZ_A, HPZ0_V(PAGE_SHIFT - 12));
        t4_write_reg(adap, TP_PIO_ADDR_A, TP_INGRESS_CONFIG_A);
        v = t4_read_reg(adap, TP_PIO_DATA_A);
        t4_write_reg(adap, TP_PIO_DATA_A, v & ~CSUM_HAS_PSEUDO_HDR_F);

        /* first 4 Tx modulation queues point to consecutive Tx channels */
        adap->params.tp.tx_modq_map = 0xE4;
        t4_write_reg(adap, TP_TX_MOD_QUEUE_REQ_MAP_A,
                     TX_MOD_QUEUE_REQ_MAP_V(adap->params.tp.tx_modq_map));

        /* associate each Tx modulation queue with consecutive Tx channels */
        v = 0x84218421;
        t4_write_indirect(adap, TP_PIO_ADDR_A, TP_PIO_DATA_A,
                          &v, 1, TP_TX_SCHED_HDR_A);
        t4_write_indirect(adap, TP_PIO_ADDR_A, TP_PIO_DATA_A,
                          &v, 1, TP_TX_SCHED_FIFO_A);
        t4_write_indirect(adap, TP_PIO_ADDR_A, TP_PIO_DATA_A,
                          &v, 1, TP_TX_SCHED_PCMD_A);

#define T4_TX_MODQ_10G_WEIGHT_DEFAULT 16 /* in KB units */
        if (is_offload(adap)) {
                t4_write_reg(adap, TP_TX_MOD_QUEUE_WEIGHT0_A,
                             TX_MODQ_WEIGHT0_V(T4_TX_MODQ_10G_WEIGHT_DEFAULT) |
                             TX_MODQ_WEIGHT1_V(T4_TX_MODQ_10G_WEIGHT_DEFAULT) |
                             TX_MODQ_WEIGHT2_V(T4_TX_MODQ_10G_WEIGHT_DEFAULT) |
                             TX_MODQ_WEIGHT3_V(T4_TX_MODQ_10G_WEIGHT_DEFAULT));
                t4_write_reg(adap, TP_TX_MOD_CHANNEL_WEIGHT_A,
                             TX_MODQ_WEIGHT0_V(T4_TX_MODQ_10G_WEIGHT_DEFAULT) |
                             TX_MODQ_WEIGHT1_V(T4_TX_MODQ_10G_WEIGHT_DEFAULT) |
                             TX_MODQ_WEIGHT2_V(T4_TX_MODQ_10G_WEIGHT_DEFAULT) |
                             TX_MODQ_WEIGHT3_V(T4_TX_MODQ_10G_WEIGHT_DEFAULT));
        }

        /* get basic stuff going */
        return t4_early_init(adap, adap->pf);
}

/*
 * Max # of ATIDs.  The absolute HW max is 16K but we keep it lower.
 */
#define MAX_ATIDS 8192U

/*
 * Phase 0 of initialization: contact FW, obtain config, perform basic init.
 *
 * If the firmware we're dealing with has Configuration File support, then
 * we use that to perform all configuration
 */

/*
 * Tweak configuration based on module parameters, etc.  Most of these have
 * defaults assigned to them by Firmware Configuration Files (if we're using
 * them) but need to be explicitly set if we're using hard-coded
 * initialization.  But even in the case of using Firmware Configuration
 * Files, we'd like to expose the ability to change these via module
 * parameters so these are essentially common tweaks/settings for
 * Configuration Files and hard-coded initialization ...
 */
static int adap_init0_tweaks(struct adapter *adapter)
{
        /*
         * Fix up various Host-Dependent Parameters like Page Size, Cache
         * Line Size, etc.  The firmware default is for a 4KB Page Size and
         * 64B Cache Line Size ...
         */
        t4_fixup_host_params(adapter, PAGE_SIZE, L1_CACHE_BYTES);

        /*
         * Process module parameters which affect early initialization.
         */
        if (rx_dma_offset != 2 && rx_dma_offset != 0) {
                dev_err(&adapter->pdev->dev,
                        "Ignoring illegal rx_dma_offset=%d, using 2\n",
                        rx_dma_offset);
                rx_dma_offset = 2;
        }
        t4_set_reg_field(adapter, SGE_CONTROL_A,
                         PKTSHIFT_V(PKTSHIFT_M),
                         PKTSHIFT_V(rx_dma_offset));

        /*
         * Don't include the "IP Pseudo Header" in CPL_RX_PKT checksums: Linux
         * adds the pseudo header itself.
         */
        t4_tp_wr_bits_indirect(adapter, TP_INGRESS_CONFIG_A,
                               CSUM_HAS_PSEUDO_HDR_F, 0);

        return 0;
}

/* 10Gb/s-BT PHY Support. chip-external 10Gb/s-BT PHYs are complex chips
 * unto themselves and they contain their own firmware to perform their
 * tasks ...
 */
static int phy_aq1202_version(const u8 *phy_fw_data,
                              size_t phy_fw_size)
{
        int offset;

        /* At offset 0x8 you're looking for the primary image's
         * starting offset which is 3 Bytes wide
         *
         * At offset 0xa of the primary image, you look for the offset
         * of the DRAM segment which is 3 Bytes wide.
         *
         * The FW version is at offset 0x27e of the DRAM and is 2 Bytes
         * wide
         */
        #define be16(__p) (((__p)[0] << 8) | (__p)[1])
        #define le16(__p) ((__p)[0] | ((__p)[1] << 8))
        #define le24(__p) (le16(__p) | ((__p)[2] << 16))

        offset = le24(phy_fw_data + 0x8) << 12;
        offset = le24(phy_fw_data + offset + 0xa);
        return be16(phy_fw_data + offset + 0x27e);

        #undef be16
        #undef le16
        #undef le24
}

static struct info_10gbt_phy_fw {
        unsigned int phy_fw_id;         /* PCI Device ID */
        char *phy_fw_file;              /* /lib/firmware/ PHY Firmware file */
        int (*phy_fw_version)(const u8 *phy_fw_data, size_t phy_fw_size);
        int phy_flash;                  /* Has FLASH for PHY Firmware */
} phy_info_array[] = {
        {
                PHY_AQ1202_DEVICEID,
                PHY_AQ1202_FIRMWARE,
                phy_aq1202_version,
                1,
        },
        {
                PHY_BCM84834_DEVICEID,
                PHY_BCM84834_FIRMWARE,
                NULL,
                0,
        },
        { 0, NULL, NULL },
};

static struct info_10gbt_phy_fw *find_phy_info(int devid)
{
        int i;

        for (i = 0; i < ARRAY_SIZE(phy_info_array); i++) {
                if (phy_info_array[i].phy_fw_id == devid)
                        return &phy_info_array[i];
        }
        return NULL;
}

/* Handle updating of chip-external 10Gb/s-BT PHY firmware.  This needs to
 * happen after the FW_RESET_CMD but before the FW_INITIALIZE_CMD.  On error
 * we return a negative error number.  If we transfer new firmware we return 1
 * (from t4_load_phy_fw()).  If we don't do anything we return 0.
 */
static int adap_init0_phy(struct adapter *adap)
{
        const struct firmware *phyf;
        int ret;
        struct info_10gbt_phy_fw *phy_info;

        /* Use the device ID to determine which PHY file to flash.
         */
        phy_info = find_phy_info(adap->pdev->device);
        if (!phy_info) {
                dev_warn(adap->pdev_dev,
                         "No PHY Firmware file found for this PHY\n");
                return -EOPNOTSUPP;
        }

        /* If we have a T4 PHY firmware file under /lib/firmware/cxgb4/, then
         * use that. The adapter firmware provides us with a memory buffer
         * where we can load a PHY firmware file from the host if we want to
         * override the PHY firmware File in flash.
         */
        ret = request_firmware_direct(&phyf, phy_info->phy_fw_file,
                                      adap->pdev_dev);
        if (ret < 0) {
                /* For adapters without FLASH attached to PHY for their
                 * firmware, it's obviously a fatal error if we can't get the
                 * firmware to the adapter.  For adapters with PHY firmware
                 * FLASH storage, it's worth a warning if we can't find the
                 * PHY Firmware but we'll neuter the error ...
                 */
                dev_err(adap->pdev_dev, "unable to find PHY Firmware image "
                        "/lib/firmware/%s, error %d\n",
                        phy_info->phy_fw_file, -ret);
                if (phy_info->phy_flash) {
                        int cur_phy_fw_ver = 0;

                        t4_phy_fw_ver(adap, &cur_phy_fw_ver);
                        dev_warn(adap->pdev_dev, "continuing with, on-adapter "
                                 "FLASH copy, version %#x\n", cur_phy_fw_ver);
                        ret = 0;
                }

                return ret;
        }

        /* Load PHY Firmware onto adapter.
         */
        ret = t4_load_phy_fw(adap, MEMWIN_NIC, &adap->win0_lock,
                             phy_info->phy_fw_version,
                             (u8 *)phyf->data, phyf->size);
        if (ret < 0)
                dev_err(adap->pdev_dev, "PHY Firmware transfer error %d\n",
                        -ret);
        else if (ret > 0) {
                int new_phy_fw_ver = 0;

                if (phy_info->phy_fw_version)
                        new_phy_fw_ver = phy_info->phy_fw_version(phyf->data,
                                                                  phyf->size);
                dev_info(adap->pdev_dev, "Successfully transferred PHY "
                         "Firmware /lib/firmware/%s, version %#x\n",
                         phy_info->phy_fw_file, new_phy_fw_ver);
        }

        release_firmware(phyf);

        return ret;
}

/*
 * Attempt to initialize the adapter via a Firmware Configuration File.
 */
static int adap_init0_config(struct adapter *adapter, int reset)
{
        struct fw_caps_config_cmd caps_cmd;
        const struct firmware *cf;
        unsigned long mtype = 0, maddr = 0;
        u32 finiver, finicsum, cfcsum;
        int ret;
        int config_issued = 0;
        char *fw_config_file, fw_config_file_path[256];
        char *config_name = NULL;

        /*
         * Reset device if necessary.
         */
        if (reset) {
                ret = t4_fw_reset(adapter, adapter->mbox,
                                  PIORSTMODE_F | PIORST_F);
                if (ret < 0)
                        goto bye;
        }

        /* If this is a 10Gb/s-BT adapter make sure the chip-external
         * 10Gb/s-BT PHYs have up-to-date firmware.  Note that this step needs
         * to be performed after any global adapter RESET above since some
         * PHYs only have local RAM copies of the PHY firmware.
         */
        if (is_10gbt_device(adapter->pdev->device)) {
                ret = adap_init0_phy(adapter);
                if (ret < 0)
                        goto bye;
        }
        /*
         * If we have a T4 configuration file under /lib/firmware/cxgb4/,
         * then use that.  Otherwise, use the configuration file stored
         * in the adapter flash ...
         */
        switch (CHELSIO_CHIP_VERSION(adapter->params.chip)) {
        case CHELSIO_T4:
                fw_config_file = FW4_CFNAME;
                break;
        case CHELSIO_T5:
                fw_config_file = FW5_CFNAME;
                break;
        case CHELSIO_T6:
                fw_config_file = FW6_CFNAME;
                break;
        default:
                dev_err(adapter->pdev_dev, "Device %d is not supported\n",
                       adapter->pdev->device);
                ret = -EINVAL;
                goto bye;
        }

        ret = request_firmware(&cf, fw_config_file, adapter->pdev_dev);
        if (ret < 0) {
                config_name = "On FLASH";
                mtype = FW_MEMTYPE_CF_FLASH;
                maddr = t4_flash_cfg_addr(adapter);
        } else {
                u32 params[7], val[7];

                sprintf(fw_config_file_path,
                        "/lib/firmware/%s", fw_config_file);
                config_name = fw_config_file_path;

                if (cf->size >= FLASH_CFG_MAX_SIZE)
                        ret = -ENOMEM;
                else {
                        params[0] = (FW_PARAMS_MNEM_V(FW_PARAMS_MNEM_DEV) |
                             FW_PARAMS_PARAM_X_V(FW_PARAMS_PARAM_DEV_CF));
                        ret = t4_query_params(adapter, adapter->mbox,
                                              adapter->pf, 0, 1, params, val);
                        if (ret == 0) {
                                /*
                                 * For t4_memory_rw() below addresses and
                                 * sizes have to be in terms of multiples of 4
                                 * bytes.  So, if the Configuration File isn't
                                 * a multiple of 4 bytes in length we'll have
                                 * to write that out separately since we can't
                                 * guarantee that the bytes following the
                                 * residual byte in the buffer returned by
                                 * request_firmware() are zeroed out ...
                                 */
                                size_t resid = cf->size & 0x3;
                                size_t size = cf->size & ~0x3;
                                __be32 *data = (__be32 *)cf->data;

                                mtype = FW_PARAMS_PARAM_Y_G(val[0]);
                                maddr = FW_PARAMS_PARAM_Z_G(val[0]) << 16;

                                spin_lock(&adapter->win0_lock);
                                ret = t4_memory_rw(adapter, 0, mtype, maddr,
                                                   size, data, T4_MEMORY_WRITE);
                                if (ret == 0 && resid != 0) {
                                        union {
                                                __be32 word;
                                                char buf[4];
                                        } last;
                                        int i;

                                        last.word = data[size >> 2];
                                        for (i = resid; i < 4; i++)
                                                last.buf[i] = 0;
                                        ret = t4_memory_rw(adapter, 0, mtype,
                                                           maddr + size,
                                                           4, &last.word,
                                                           T4_MEMORY_WRITE);
                                }
                                spin_unlock(&adapter->win0_lock);
                        }
                }

                release_firmware(cf);
                if (ret)
                        goto bye;
        }

        /*
         * Issue a Capability Configuration command to the firmware to get it
         * to parse the Configuration File.  We don't use t4_fw_config_file()
         * because we want the ability to modify various features after we've
         * processed the configuration file ...
         */
        memset(&caps_cmd, 0, sizeof(caps_cmd));
        caps_cmd.op_to_write =
                htonl(FW_CMD_OP_V(FW_CAPS_CONFIG_CMD) |
                      FW_CMD_REQUEST_F |
                      FW_CMD_READ_F);
        caps_cmd.cfvalid_to_len16 =
                htonl(FW_CAPS_CONFIG_CMD_CFVALID_F |
                      FW_CAPS_CONFIG_CMD_MEMTYPE_CF_V(mtype) |
                      FW_CAPS_CONFIG_CMD_MEMADDR64K_CF_V(maddr >> 16) |
                      FW_LEN16(caps_cmd));
        ret = t4_wr_mbox(adapter, adapter->mbox, &caps_cmd, sizeof(caps_cmd),
                         &caps_cmd);

        /* If the CAPS_CONFIG failed with an ENOENT (for a Firmware
         * Configuration File in FLASH), our last gasp effort is to use the
         * Firmware Configuration File which is embedded in the firmware.  A
         * very few early versions of the firmware didn't have one embedded
         * but we can ignore those.
         */
        if (ret == -ENOENT) {
                memset(&caps_cmd, 0, sizeof(caps_cmd));
                caps_cmd.op_to_write =
                        htonl(FW_CMD_OP_V(FW_CAPS_CONFIG_CMD) |
                                        FW_CMD_REQUEST_F |
                                        FW_CMD_READ_F);
                caps_cmd.cfvalid_to_len16 = htonl(FW_LEN16(caps_cmd));
                ret = t4_wr_mbox(adapter, adapter->mbox, &caps_cmd,
                                sizeof(caps_cmd), &caps_cmd);
                config_name = "Firmware Default";
        }

        config_issued = 1;
        if (ret < 0)
                goto bye;

        finiver = ntohl(caps_cmd.finiver);
        finicsum = ntohl(caps_cmd.finicsum);
        cfcsum = ntohl(caps_cmd.cfcsum);
        if (finicsum != cfcsum)
                dev_warn(adapter->pdev_dev, "Configuration File checksum "\
                         "mismatch: [fini] csum=%#x, computed csum=%#x\n",
                         finicsum, cfcsum);

        /*
         * And now tell the firmware to use the configuration we just loaded.
         */
        caps_cmd.op_to_write =
                htonl(FW_CMD_OP_V(FW_CAPS_CONFIG_CMD) |
                      FW_CMD_REQUEST_F |
                      FW_CMD_WRITE_F);
        caps_cmd.cfvalid_to_len16 = htonl(FW_LEN16(caps_cmd));
        ret = t4_wr_mbox(adapter, adapter->mbox, &caps_cmd, sizeof(caps_cmd),
                         NULL);
        if (ret < 0)
                goto bye;

        /*
         * Tweak configuration based on system architecture, module
         * parameters, etc.
         */
        ret = adap_init0_tweaks(adapter);
        if (ret < 0)
                goto bye;

        /*
         * And finally tell the firmware to initialize itself using the
         * parameters from the Configuration File.
         */
        ret = t4_fw_initialize(adapter, adapter->mbox);
        if (ret < 0)
                goto bye;

        /* Emit Firmware Configuration File information and return
         * successfully.
         */
        dev_info(adapter->pdev_dev, "Successfully configured using Firmware "\
                 "Configuration File \"%s\", version %#x, computed checksum %#x\n",
                 config_name, finiver, cfcsum);
        return 0;

        /*
         * Something bad happened.  Return the error ...  (If the "error"
         * is that there's no Configuration File on the adapter we don't
         * want to issue a warning since this is fairly common.)
         */
bye:
        if (config_issued && ret != -ENOENT)
                dev_warn(adapter->pdev_dev, "\"%s\" configuration file error %d\n",
                         config_name, -ret);
        return ret;
}

static struct fw_info fw_info_array[] = {
        {
                .chip = CHELSIO_T4,
                .fs_name = FW4_CFNAME,
                .fw_mod_name = FW4_FNAME,
                .fw_hdr = {
                        .chip = FW_HDR_CHIP_T4,
                        .fw_ver = __cpu_to_be32(FW_VERSION(T4)),
                        .intfver_nic = FW_INTFVER(T4, NIC),
                        .intfver_vnic = FW_INTFVER(T4, VNIC),
                        .intfver_ri = FW_INTFVER(T4, RI),
                        .intfver_iscsi = FW_INTFVER(T4, ISCSI),
                        .intfver_fcoe = FW_INTFVER(T4, FCOE),
                },
        }, {
                .chip = CHELSIO_T5,
                .fs_name = FW5_CFNAME,
                .fw_mod_name = FW5_FNAME,
                .fw_hdr = {
                        .chip = FW_HDR_CHIP_T5,
                        .fw_ver = __cpu_to_be32(FW_VERSION(T5)),
                        .intfver_nic = FW_INTFVER(T5, NIC),
                        .intfver_vnic = FW_INTFVER(T5, VNIC),
                        .intfver_ri = FW_INTFVER(T5, RI),
                        .intfver_iscsi = FW_INTFVER(T5, ISCSI),
                        .intfver_fcoe = FW_INTFVER(T5, FCOE),
                },
        }, {
                .chip = CHELSIO_T6,
                .fs_name = FW6_CFNAME,
                .fw_mod_name = FW6_FNAME,
                .fw_hdr = {
                        .chip = FW_HDR_CHIP_T6,
                        .fw_ver = __cpu_to_be32(FW_VERSION(T6)),
                        .intfver_nic = FW_INTFVER(T6, NIC),
                        .intfver_vnic = FW_INTFVER(T6, VNIC),
                        .intfver_ofld = FW_INTFVER(T6, OFLD),
                        .intfver_ri = FW_INTFVER(T6, RI),
                        .intfver_iscsipdu = FW_INTFVER(T6, ISCSIPDU),
                        .intfver_iscsi = FW_INTFVER(T6, ISCSI),
                        .intfver_fcoepdu = FW_INTFVER(T6, FCOEPDU),
                        .intfver_fcoe = FW_INTFVER(T6, FCOE),
                },
        }

};

static struct fw_info *find_fw_info(int chip)
{
        int i;

        for (i = 0; i < ARRAY_SIZE(fw_info_array); i++) {
                if (fw_info_array[i].chip == chip)
                        return &fw_info_array[i];
        }
        return NULL;
}

/*
 * Phase 0 of initialization: contact FW, obtain config, perform basic init.
 */
static int adap_init0(struct adapter *adap)
{
        int ret;
        u32 v, port_vec;
        enum dev_state state;
        u32 params[7], val[7];
        struct fw_caps_config_cmd caps_cmd;
        int reset = 1;

        /* Grab Firmware Device Log parameters as early as possible so we have
         * access to it for debugging, etc.
         */
        ret = t4_init_devlog_params(adap);
        if (ret < 0)
                return ret;

        /* Contact FW, advertising Master capability */
        ret = t4_fw_hello(adap, adap->mbox, adap->mbox,
                          is_kdump_kernel() ? MASTER_MUST : MASTER_MAY, &state);
        if (ret < 0) {
                dev_err(adap->pdev_dev, "could not connect to FW, error %d\n",
                        ret);
                return ret;
        }
        if (ret == adap->mbox)
                adap->flags |= MASTER_PF;

        /*
         * If we're the Master PF Driver and the device is uninitialized,
         * then let's consider upgrading the firmware ...  (We always want
         * to check the firmware version number in order to A. get it for
         * later reporting and B. to warn if the currently loaded firmware
         * is excessively mismatched relative to the driver.)
         */
        t4_get_fw_version(adap, &adap->params.fw_vers);
        t4_get_bs_version(adap, &adap->params.bs_vers);
        t4_get_tp_version(adap, &adap->params.tp_vers);
        t4_get_exprom_version(adap, &adap->params.er_vers);

        ret = t4_check_fw_version(adap);
        /* If firmware is too old (not supported by driver) force an update. */
        if (ret)
                state = DEV_STATE_UNINIT;
        if ((adap->flags & MASTER_PF) && state != DEV_STATE_INIT) {
                struct fw_info *fw_info;
                struct fw_hdr *card_fw;
                const struct firmware *fw;
                const u8 *fw_data = NULL;
                unsigned int fw_size = 0;

                /* This is the firmware whose headers the driver was compiled
                 * against
                 */
                fw_info = find_fw_info(CHELSIO_CHIP_VERSION(adap->params.chip));
                if (fw_info == NULL) {
                        dev_err(adap->pdev_dev,
                                "unable to get firmware info for chip %d.\n",
                                CHELSIO_CHIP_VERSION(adap->params.chip));
                        return -EINVAL;
                }

                /* allocate memory to read the header of the firmware on the
                 * card
                 */
                card_fw = t4_alloc_mem(sizeof(*card_fw));

                /* Get FW from from /lib/firmware/ */
                ret = request_firmware(&fw, fw_info->fw_mod_name,
                                       adap->pdev_dev);
                if (ret < 0) {
                        dev_err(adap->pdev_dev,
                                "unable to load firmware image %s, error %d\n",
                                fw_info->fw_mod_name, ret);
                } else {
                        fw_data = fw->data;
                        fw_size = fw->size;
                }

                /* upgrade FW logic */
                ret = t4_prep_fw(adap, fw_info, fw_data, fw_size, card_fw,
                                 state, &reset);

                /* Cleaning up */
                release_firmware(fw);
                t4_free_mem(card_fw);

                if (ret < 0)
                        goto bye;
        }

        /*
         * Grab VPD parameters.  This should be done after we establish a
         * connection to the firmware since some of the VPD parameters
         * (notably the Core Clock frequency) are retrieved via requests to
         * the firmware.  On the other hand, we need these fairly early on
         * so we do this right after getting ahold of the firmware.
         */
        ret = t4_get_vpd_params(adap, &adap->params.vpd);
        if (ret < 0)
                goto bye;

        /*
         * Find out what ports are available to us.  Note that we need to do
         * this before calling adap_init0_no_config() since it needs nports
         * and portvec ...
         */
        v =
            FW_PARAMS_MNEM_V(FW_PARAMS_MNEM_DEV) |
            FW_PARAMS_PARAM_X_V(FW_PARAMS_PARAM_DEV_PORTVEC);
        ret = t4_query_params(adap, adap->mbox, adap->pf, 0, 1, &v, &port_vec);
        if (ret < 0)
                goto bye;

        adap->params.nports = hweight32(port_vec);
        adap->params.portvec = port_vec;

        /* If the firmware is initialized already, emit a simply note to that
         * effect. Otherwise, it's time to try initializing the adapter.
         */
        if (state == DEV_STATE_INIT) {
                dev_info(adap->pdev_dev, "Coming up as %s: "\
                         "Adapter already initialized\n",
                         adap->flags & MASTER_PF ? "MASTER" : "SLAVE");
        } else {
                dev_info(adap->pdev_dev, "Coming up as MASTER: "\
                         "Initializing adapter\n");

                /* Find out whether we're dealing with a version of the
                 * firmware which has configuration file support.
                 */
                params[0] = (FW_PARAMS_MNEM_V(FW_PARAMS_MNEM_DEV) |
                             FW_PARAMS_PARAM_X_V(FW_PARAMS_PARAM_DEV_CF));
                ret = t4_query_params(adap, adap->mbox, adap->pf, 0, 1,
                                      params, val);

                /* If the firmware doesn't support Configuration Files,
                 * return an error.
                 */
                if (ret < 0) {
                        dev_err(adap->pdev_dev, "firmware doesn't support "
                                "Firmware Configuration Files\n");
                        goto bye;
                }

                /* The firmware provides us with a memory buffer where we can
                 * load a Configuration File from the host if we want to
                 * override the Configuration File in flash.
                 */
                ret = adap_init0_config(adap, reset);
                if (ret == -ENOENT) {
                        dev_err(adap->pdev_dev, "no Configuration File "
                                "present on adapter.\n");
                        goto bye;
                }
                if (ret < 0) {
                        dev_err(adap->pdev_dev, "could not initialize "
                                "adapter, error %d\n", -ret);
                        goto bye;
                }
        }

        /* Give the SGE code a chance to pull in anything that it needs ...
         * Note that this must be called after we retrieve our VPD parameters
         * in order to know how to convert core ticks to seconds, etc.
         */
        ret = t4_sge_init(adap);
        if (ret < 0)
                goto bye;

        if (is_bypass_device(adap->pdev->device))
                adap->params.bypass = 1;

        /*
         * Grab some of our basic fundamental operating parameters.
         */
#define FW_PARAM_DEV(param) \
        (FW_PARAMS_MNEM_V(FW_PARAMS_MNEM_DEV) | \
        FW_PARAMS_PARAM_X_V(FW_PARAMS_PARAM_DEV_##param))

#define FW_PARAM_PFVF(param) \
        FW_PARAMS_MNEM_V(FW_PARAMS_MNEM_PFVF) | \
        FW_PARAMS_PARAM_X_V(FW_PARAMS_PARAM_PFVF_##param)|  \
        FW_PARAMS_PARAM_Y_V(0) | \
        FW_PARAMS_PARAM_Z_V(0)

        params[0] = FW_PARAM_PFVF(EQ_START);
        params[1] = FW_PARAM_PFVF(L2T_START);
        params[2] = FW_PARAM_PFVF(L2T_END);
        params[3] = FW_PARAM_PFVF(FILTER_START);
        params[4] = FW_PARAM_PFVF(FILTER_END);
        params[5] = FW_PARAM_PFVF(IQFLINT_START);
        ret = t4_query_params(adap, adap->mbox, adap->pf, 0, 6, params, val);
        if (ret < 0)
                goto bye;
        adap->sge.egr_start = val[0];
        adap->l2t_start = val[1];
        adap->l2t_end = val[2];
        adap->tids.ftid_base = val[3];
        adap->tids.nftids = val[4] - val[3] + 1;
        adap->sge.ingr_start = val[5];

        /* qids (ingress/egress) returned from firmware can be anywhere
         * in the range from EQ(IQFLINT)_START to EQ(IQFLINT)_END.
         * Hence driver needs to allocate memory for this range to
         * store the queue info. Get the highest IQFLINT/EQ index returned
         * in FW_EQ_*_CMD.alloc command.
         */
        params[0] = FW_PARAM_PFVF(EQ_END);
        params[1] = FW_PARAM_PFVF(IQFLINT_END);
        ret = t4_query_params(adap, adap->mbox, adap->pf, 0, 2, params, val);
        if (ret < 0)
                goto bye;
        adap->sge.egr_sz = val[0] - adap->sge.egr_start + 1;
        adap->sge.ingr_sz = val[1] - adap->sge.ingr_start + 1;

        adap->sge.egr_map = kcalloc(adap->sge.egr_sz,
                                    sizeof(*adap->sge.egr_map), GFP_KERNEL);
        if (!adap->sge.egr_map) {
                ret = -ENOMEM;
                goto bye;
        }

        adap->sge.ingr_map = kcalloc(adap->sge.ingr_sz,
                                     sizeof(*adap->sge.ingr_map), GFP_KERNEL);
        if (!adap->sge.ingr_map) {
                ret = -ENOMEM;
                goto bye;
        }

        /* Allocate the memory for the vaious egress queue bitmaps
         * ie starving_fl, txq_maperr and blocked_fl.
         */
        adap->sge.starving_fl = kcalloc(BITS_TO_LONGS(adap->sge.egr_sz),
                                        sizeof(long), GFP_KERNEL);
        if (!adap->sge.starving_fl) {
                ret = -ENOMEM;
                goto bye;
        }

        adap->sge.txq_maperr = kcalloc(BITS_TO_LONGS(adap->sge.egr_sz),
                                       sizeof(long), GFP_KERNEL);
        if (!adap->sge.txq_maperr) {
                ret = -ENOMEM;
                goto bye;
        }

#ifdef CONFIG_DEBUG_FS
        adap->sge.blocked_fl = kcalloc(BITS_TO_LONGS(adap->sge.egr_sz),
                                       sizeof(long), GFP_KERNEL);
        if (!adap->sge.blocked_fl) {
                ret = -ENOMEM;
                goto bye;
        }
#endif

        params[0] = FW_PARAM_PFVF(CLIP_START);
        params[1] = FW_PARAM_PFVF(CLIP_END);
        ret = t4_query_params(adap, adap->mbox, adap->pf, 0, 2, params, val);
        if (ret < 0)
                goto bye;
        adap->clipt_start = val[0];
        adap->clipt_end = val[1];

        /* We don't yet have a PARAMs calls to retrieve the number of Traffic
         * Classes supported by the hardware/firmware so we hard code it here
         * for now.
         */
        adap->params.nsched_cls = is_t4(adap->params.chip) ? 15 : 16;

        /* query params related to active filter region */
        params[0] = FW_PARAM_PFVF(ACTIVE_FILTER_START);
        params[1] = FW_PARAM_PFVF(ACTIVE_FILTER_END);
        ret = t4_query_params(adap, adap->mbox, adap->pf, 0, 2, params, val);
        /* If Active filter size is set we enable establishing
         * offload connection through firmware work request
         */
        if ((val[0] != val[1]) && (ret >= 0)) {
                adap->flags |= FW_OFLD_CONN;
                adap->tids.aftid_base = val[0];
                adap->tids.aftid_end = val[1];
        }

        /* If we're running on newer firmware, let it know that we're
         * prepared to deal with encapsulated CPL messages.  Older
         * firmware won't understand this and we'll just get
         * unencapsulated messages ...
         */
        params[0] = FW_PARAM_PFVF(CPLFW4MSG_ENCAP);
        val[0] = 1;
        (void)t4_set_params(adap, adap->mbox, adap->pf, 0, 1, params, val);

        /*
         * Find out whether we're allowed to use the T5+ ULPTX MEMWRITE DSGL
         * capability.  Earlier versions of the firmware didn't have the
         * ULPTX_MEMWRITE_DSGL so we'll interpret a query failure as no
         * permission to use ULPTX MEMWRITE DSGL.
         */
        if (is_t4(adap->params.chip)) {
                adap->params.ulptx_memwrite_dsgl = false;
        } else {
                params[0] = FW_PARAM_DEV(ULPTX_MEMWRITE_DSGL);
                ret = t4_query_params(adap, adap->mbox, adap->pf, 0,
                                      1, params, val);
                adap->params.ulptx_memwrite_dsgl = (ret == 0 && val[0] != 0);
        }

        /*
         * Get device capabilities so we can determine what resources we need
         * to manage.
         */
        memset(&caps_cmd, 0, sizeof(caps_cmd));
        caps_cmd.op_to_write = htonl(FW_CMD_OP_V(FW_CAPS_CONFIG_CMD) |
                                     FW_CMD_REQUEST_F | FW_CMD_READ_F);
        caps_cmd.cfvalid_to_len16 = htonl(FW_LEN16(caps_cmd));
        ret = t4_wr_mbox(adap, adap->mbox, &caps_cmd, sizeof(caps_cmd),
                         &caps_cmd);
        if (ret < 0)
                goto bye;

        if (caps_cmd.ofldcaps) {
                /* query offload-related parameters */
                params[0] = FW_PARAM_DEV(NTID);
                params[1] = FW_PARAM_PFVF(SERVER_START);
                params[2] = FW_PARAM_PFVF(SERVER_END);
                params[3] = FW_PARAM_PFVF(TDDP_START);
                params[4] = FW_PARAM_PFVF(TDDP_END);
                params[5] = FW_PARAM_DEV(FLOWC_BUFFIFO_SZ);
                ret = t4_query_params(adap, adap->mbox, adap->pf, 0, 6,
                                      params, val);
                if (ret < 0)
                        goto bye;
                adap->tids.ntids = val[0];
                adap->tids.natids = min(adap->tids.ntids / 2, MAX_ATIDS);
                adap->tids.stid_base = val[1];
                adap->tids.nstids = val[2] - val[1] + 1;
                /*
                 * Setup server filter region. Divide the available filter
                 * region into two parts. Regular filters get 1/3rd and server
                 * filters get 2/3rd part. This is only enabled if workarond
                 * path is enabled.
                 * 1. For regular filters.
                 * 2. Server filter: This are special filters which are used
                 * to redirect SYN packets to offload queue.
                 */
                if (adap->flags & FW_OFLD_CONN && !is_bypass(adap)) {
                        adap->tids.sftid_base = adap->tids.ftid_base +
                                        DIV_ROUND_UP(adap->tids.nftids, 3);
                        adap->tids.nsftids = adap->tids.nftids -
                                         DIV_ROUND_UP(adap->tids.nftids, 3);
                        adap->tids.nftids = adap->tids.sftid_base -
                                                adap->tids.ftid_base;
                }
                adap->vres.ddp.start = val[3];
                adap->vres.ddp.size = val[4] - val[3] + 1;
                adap->params.ofldq_wr_cred = val[5];

                adap->params.offload = 1;
        }
        if (caps_cmd.rdmacaps) {
                params[0] = FW_PARAM_PFVF(STAG_START);
                params[1] = FW_PARAM_PFVF(STAG_END);
                params[2] = FW_PARAM_PFVF(RQ_START);
                params[3] = FW_PARAM_PFVF(RQ_END);
                params[4] = FW_PARAM_PFVF(PBL_START);
                params[5] = FW_PARAM_PFVF(PBL_END);
                ret = t4_query_params(adap, adap->mbox, adap->pf, 0, 6,
                                      params, val);
                if (ret < 0)
                        goto bye;
                adap->vres.stag.start = val[0];
                adap->vres.stag.size = val[1] - val[0] + 1;
                adap->vres.rq.start = val[2];
                adap->vres.rq.size = val[3] - val[2] + 1;
                adap->vres.pbl.start = val[4];
                adap->vres.pbl.size = val[5] - val[4] + 1;

                params[0] = FW_PARAM_PFVF(SQRQ_START);
                params[1] = FW_PARAM_PFVF(SQRQ_END);
                params[2] = FW_PARAM_PFVF(CQ_START);
                params[3] = FW_PARAM_PFVF(CQ_END);
                params[4] = FW_PARAM_PFVF(OCQ_START);
                params[5] = FW_PARAM_PFVF(OCQ_END);
                ret = t4_query_params(adap, adap->mbox, adap->pf, 0, 6, params,
                                      val);
                if (ret < 0)
                        goto bye;
                adap->vres.qp.start = val[0];
                adap->vres.qp.size = val[1] - val[0] + 1;
                adap->vres.cq.start = val[2];
                adap->vres.cq.size = val[3] - val[2] + 1;
                adap->vres.ocq.start = val[4];
                adap->vres.ocq.size = val[5] - val[4] + 1;

                params[0] = FW_PARAM_DEV(MAXORDIRD_QP);
                params[1] = FW_PARAM_DEV(MAXIRD_ADAPTER);
                ret = t4_query_params(adap, adap->mbox, adap->pf, 0, 2, params,
                                      val);
                if (ret < 0) {
                        adap->params.max_ordird_qp = 8;
                        adap->params.max_ird_adapter = 32 * adap->tids.ntids;
                        ret = 0;
                } else {
                        adap->params.max_ordird_qp = val[0];
                        adap->params.max_ird_adapter = val[1];
                }
                dev_info(adap->pdev_dev,
                         "max_ordird_qp %d max_ird_adapter %d\n",
                         adap->params.max_ordird_qp,
                         adap->params.max_ird_adapter);
        }
        if (caps_cmd.iscsicaps) {
                params[0] = FW_PARAM_PFVF(ISCSI_START);
                params[1] = FW_PARAM_PFVF(ISCSI_END);
                ret = t4_query_params(adap, adap->mbox, adap->pf, 0, 2,
                                      params, val);
                if (ret < 0)
                        goto bye;
                adap->vres.iscsi.start = val[0];
                adap->vres.iscsi.size = val[1] - val[0] + 1;
        }
        if (caps_cmd.cryptocaps) {
                /* Should query params here...TODO */
                adap->params.crypto |= ULP_CRYPTO_LOOKASIDE;
                adap->num_uld += 1;
        }
#undef FW_PARAM_PFVF
#undef FW_PARAM_DEV

        /* The MTU/MSS Table is initialized by now, so load their values.  If
         * we're initializing the adapter, then we'll make any modifications
         * we want to the MTU/MSS Table and also initialize the congestion
         * parameters.
         */
        t4_read_mtu_tbl(adap, adap->params.mtus, NULL);
        if (state != DEV_STATE_INIT) {
                int i;

                /* The default MTU Table contains values 1492 and 1500.
                 * However, for TCP, it's better to have two values which are
                 * a multiple of 8 +/- 4 bytes apart near this popular MTU.
                 * This allows us to have a TCP Data Payload which is a
                 * multiple of 8 regardless of what combination of TCP Options
                 * are in use (always a multiple of 4 bytes) which is
                 * important for performance reasons.  For instance, if no
                 * options are in use, then we have a 20-byte IP header and a
                 * 20-byte TCP header.  In this case, a 1500-byte MSS would
                 * result in a TCP Data Payload of 1500 - 40 == 1460 bytes
                 * which is not a multiple of 8.  So using an MSS of 1488 in
                 * this case results in a TCP Data Payload of 1448 bytes which
                 * is a multiple of 8.  On the other hand, if 12-byte TCP Time
                 * Stamps have been negotiated, then an MTU of 1500 bytes
                 * results in a TCP Data Payload of 1448 bytes which, as
                 * above, is a multiple of 8 bytes ...
                 */
                for (i = 0; i < NMTUS; i++)
                        if (adap->params.mtus[i] == 1492) {
                                adap->params.mtus[i] = 1488;
                                break;
                        }

                t4_load_mtus(adap, adap->params.mtus, adap->params.a_wnd,
                             adap->params.b_wnd);
        }
        t4_init_sge_params(adap);
        adap->flags |= FW_OK;
        t4_init_tp_params(adap);
        return 0;

        /*
         * Something bad happened.  If a command timed out or failed with EIO
         * FW does not operate within its spec or something catastrophic
         * happened to HW/FW, stop issuing commands.
         */
bye:
        kfree(adap->sge.egr_map);
        kfree(adap->sge.ingr_map);
        kfree(adap->sge.starving_fl);
        kfree(adap->sge.txq_maperr);
#ifdef CONFIG_DEBUG_FS
        kfree(adap->sge.blocked_fl);
#endif
        if (ret != -ETIMEDOUT && ret != -EIO)
                t4_fw_bye(adap, adap->mbox);
        return ret;
}

/* EEH callbacks */

static pci_ers_result_t eeh_err_detected(struct pci_dev *pdev,
                                         pci_channel_state_t state)
{
        int i;
        struct adapter *adap = pci_get_drvdata(pdev);

        if (!adap)
                goto out;

        rtnl_lock();
        adap->flags &= ~FW_OK;
        notify_ulds(adap, CXGB4_STATE_START_RECOVERY);
        spin_lock(&adap->stats_lock);
        for_each_port(adap, i) {
                struct net_device *dev = adap->port[i];

                netif_device_detach(dev);
                netif_carrier_off(dev);
        }
        spin_unlock(&adap->stats_lock);
        disable_interrupts(adap);
        if (adap->flags & FULL_INIT_DONE)
                cxgb_down(adap);
        rtnl_unlock();
        if ((adap->flags & DEV_ENABLED)) {
                pci_disable_device(pdev);
                adap->flags &= ~DEV_ENABLED;
        }
out:    return state == pci_channel_io_perm_failure ?
                PCI_ERS_RESULT_DISCONNECT : PCI_ERS_RESULT_NEED_RESET;
}

static pci_ers_result_t eeh_slot_reset(struct pci_dev *pdev)
{
        int i, ret;
        struct fw_caps_config_cmd c;
        struct adapter *adap = pci_get_drvdata(pdev);

        if (!adap) {
                pci_restore_state(pdev);
                pci_save_state(pdev);
                return PCI_ERS_RESULT_RECOVERED;
        }

        if (!(adap->flags & DEV_ENABLED)) {
                if (pci_enable_device(pdev)) {
                        dev_err(&pdev->dev, "Cannot reenable PCI "
                                            "device after reset\n");
                        return PCI_ERS_RESULT_DISCONNECT;
                }
                adap->flags |= DEV_ENABLED;
        }

        pci_set_master(pdev);
        pci_restore_state(pdev);
        pci_save_state(pdev);
        pci_cleanup_aer_uncorrect_error_status(pdev);

        if (t4_wait_dev_ready(adap->regs) < 0)
                return PCI_ERS_RESULT_DISCONNECT;
        if (t4_fw_hello(adap, adap->mbox, adap->pf, MASTER_MUST, NULL) < 0)
                return PCI_ERS_RESULT_DISCONNECT;
        adap->flags |= FW_OK;
        if (adap_init1(adap, &c))
                return PCI_ERS_RESULT_DISCONNECT;

        for_each_port(adap, i) {
                struct port_info *p = adap2pinfo(adap, i);

                ret = t4_alloc_vi(adap, adap->mbox, p->tx_chan, adap->pf, 0, 1,
                                  NULL, NULL);
                if (ret < 0)
                        return PCI_ERS_RESULT_DISCONNECT;
                p->viid = ret;
                p->xact_addr_filt = -1;
        }

        t4_load_mtus(adap, adap->params.mtus, adap->params.a_wnd,
                     adap->params.b_wnd);
        setup_memwin(adap);
        if (cxgb_up(adap))
                return PCI_ERS_RESULT_DISCONNECT;
        return PCI_ERS_RESULT_RECOVERED;
}

static void eeh_resume(struct pci_dev *pdev)
{
        int i;
        struct adapter *adap = pci_get_drvdata(pdev);

        if (!adap)
                return;

        rtnl_lock();
        for_each_port(adap, i) {
                struct net_device *dev = adap->port[i];

                if (netif_running(dev)) {
                        link_start(dev);
                        cxgb_set_rxmode(dev);
                }
                netif_device_attach(dev);
        }
        rtnl_unlock();
}

static const struct pci_error_handlers cxgb4_eeh = {
        .error_detected = eeh_err_detected,
        .slot_reset     = eeh_slot_reset,
        .resume         = eeh_resume,
};

static inline bool is_x_10g_port(const struct link_config *lc)
{
        return (lc->supported & FW_PORT_CAP_SPEED_10G) != 0 ||
               (lc->supported & FW_PORT_CAP_SPEED_40G) != 0;
}

/*
 * Perform default configuration of DMA queues depending on the number and type
 * of ports we found and the number of available CPUs.  Most settings can be
 * modified by the admin prior to actual use.
 */
static void cfg_queues(struct adapter *adap)
{
        struct sge *s = &adap->sge;
        int i, n10g = 0, qidx = 0;
#ifndef CONFIG_CHELSIO_T4_DCB
        int q10g = 0;
#endif
        int ciq_size;

        /* Reduce memory usage in kdump environment, disable all offload.
         */
        if (is_kdump_kernel()) {
                adap->params.offload = 0;
                adap->params.crypto = 0;
        } else if (adap->num_uld && uld_mem_alloc(adap)) {
                adap->params.crypto = 0;
        }

        for_each_port(adap, i)
                n10g += is_x_10g_port(&adap2pinfo(adap, i)->link_cfg);
#ifdef CONFIG_CHELSIO_T4_DCB
        /* For Data Center Bridging support we need to be able to support up
         * to 8 Traffic Priorities; each of which will be assigned to its
         * own TX Queue in order to prevent Head-Of-Line Blocking.
         */
        if (adap->params.nports * 8 > MAX_ETH_QSETS) {
                dev_err(adap->pdev_dev, "MAX_ETH_QSETS=%d < %d!\n",
                        MAX_ETH_QSETS, adap->params.nports * 8);
                BUG_ON(1);
        }

        for_each_port(adap, i) {
                struct port_info *pi = adap2pinfo(adap, i);

                pi->first_qset = qidx;
                pi->nqsets = 8;
                qidx += pi->nqsets;
        }
#else /* !CONFIG_CHELSIO_T4_DCB */
        /*
         * We default to 1 queue per non-10G port and up to # of cores queues
         * per 10G port.
         */
        if (n10g)
                q10g = (MAX_ETH_QSETS - (adap->params.nports - n10g)) / n10g;
        if (q10g > netif_get_num_default_rss_queues())
                q10g = netif_get_num_default_rss_queues();

        for_each_port(adap, i) {
                struct port_info *pi = adap2pinfo(adap, i);

                pi->first_qset = qidx;
                pi->nqsets = is_x_10g_port(&pi->link_cfg) ? q10g : 1;
                qidx += pi->nqsets;
        }
#endif /* !CONFIG_CHELSIO_T4_DCB */

        s->ethqsets = qidx;
        s->max_ethqsets = qidx;   /* MSI-X may lower it later */

        if (is_offload(adap)) {
                /*
                 * For offload we use 1 queue/channel if all ports are up to 1G,
                 * otherwise we divide all available queues amongst the channels
                 * capped by the number of available cores.
                 */
                if (n10g) {
                        i = min_t(int, ARRAY_SIZE(s->iscsirxq),
                                  num_online_cpus());
                        s->iscsiqsets = roundup(i, adap->params.nports);
                } else
                        s->iscsiqsets = adap->params.nports;
                /* For RDMA one Rx queue per channel suffices */
                s->rdmaqs = adap->params.nports;
                /* Try and allow at least 1 CIQ per cpu rounding down
                 * to the number of ports, with a minimum of 1 per port.
                 * A 2 port card in a 6 cpu system: 6 CIQs, 3 / port.
                 * A 4 port card in a 6 cpu system: 4 CIQs, 1 / port.
                 * A 4 port card in a 2 cpu system: 4 CIQs, 1 / port.
                 */
                s->rdmaciqs = min_t(int, MAX_RDMA_CIQS, num_online_cpus());
                s->rdmaciqs = (s->rdmaciqs / adap->params.nports) *
                                adap->params.nports;
                s->rdmaciqs = max_t(int, s->rdmaciqs, adap->params.nports);

                if (!is_t4(adap->params.chip))
                        s->niscsitq = s->iscsiqsets;
        }

        for (i = 0; i < ARRAY_SIZE(s->ethrxq); i++) {
                struct sge_eth_rxq *r = &s->ethrxq[i];

                init_rspq(adap, &r->rspq, 5, 10, 1024, 64);
                r->fl.size = 72;
        }

        for (i = 0; i < ARRAY_SIZE(s->ethtxq); i++)
                s->ethtxq[i].q.size = 1024;

        for (i = 0; i < ARRAY_SIZE(s->ctrlq); i++)
                s->ctrlq[i].q.size = 512;

        for (i = 0; i < ARRAY_SIZE(s->ofldtxq); i++)
                s->ofldtxq[i].q.size = 1024;

        for (i = 0; i < ARRAY_SIZE(s->iscsirxq); i++) {
                struct sge_ofld_rxq *r = &s->iscsirxq[i];

                init_rspq(adap, &r->rspq, 5, 1, 1024, 64);
                r->rspq.uld = CXGB4_ULD_ISCSI;
                r->fl.size = 72;
        }

        if (!is_t4(adap->params.chip)) {
                for (i = 0; i < ARRAY_SIZE(s->iscsitrxq); i++) {
                        struct sge_ofld_rxq *r = &s->iscsitrxq[i];

                        init_rspq(adap, &r->rspq, 5, 1, 1024, 64);
                        r->rspq.uld = CXGB4_ULD_ISCSIT;
                        r->fl.size = 72;
                }
        }

        for (i = 0; i < ARRAY_SIZE(s->rdmarxq); i++) {
                struct sge_ofld_rxq *r = &s->rdmarxq[i];

                init_rspq(adap, &r->rspq, 5, 1, 511, 64);
                r->rspq.uld = CXGB4_ULD_RDMA;
                r->fl.size = 72;
        }

        ciq_size = 64 + adap->vres.cq.size + adap->tids.nftids;
        if (ciq_size > SGE_MAX_IQ_SIZE) {
                CH_WARN(adap, "CIQ size too small for available IQs\n");
                ciq_size = SGE_MAX_IQ_SIZE;
        }

        for (i = 0; i < ARRAY_SIZE(s->rdmaciq); i++) {
                struct sge_ofld_rxq *r = &s->rdmaciq[i];

                init_rspq(adap, &r->rspq, 5, 1, ciq_size, 64);
                r->rspq.uld = CXGB4_ULD_RDMA;
        }

        init_rspq(adap, &s->fw_evtq, 0, 1, 1024, 64);
        init_rspq(adap, &s->intrq, 0, 1, 2 * MAX_INGQ, 64);
}

/*
 * Reduce the number of Ethernet queues across all ports to at most n.
 * n provides at least one queue per port.
 */
static void reduce_ethqs(struct adapter *adap, int n)
{
        int i;
        struct port_info *pi;

        while (n < adap->sge.ethqsets)
                for_each_port(adap, i) {
                        pi = adap2pinfo(adap, i);
                        if (pi->nqsets > 1) {
                                pi->nqsets--;
                                adap->sge.ethqsets--;
                                if (adap->sge.ethqsets <= n)
                                        break;
                        }
                }

        n = 0;
        for_each_port(adap, i) {
                pi = adap2pinfo(adap, i);
                pi->first_qset = n;
                n += pi->nqsets;
        }
}

static int get_msix_info(struct adapter *adap)
{
        struct uld_msix_info *msix_info;
        int max_ingq = (MAX_OFLD_QSETS * adap->num_uld);

        msix_info = kcalloc(max_ingq, sizeof(*msix_info), GFP_KERNEL);
        if (!msix_info)
                return -ENOMEM;

        adap->msix_bmap_ulds.msix_bmap = kcalloc(BITS_TO_LONGS(max_ingq),
                                                 sizeof(long), GFP_KERNEL);
        if (!adap->msix_bmap_ulds.msix_bmap) {
                kfree(msix_info);
                return -ENOMEM;
        }
        spin_lock_init(&adap->msix_bmap_ulds.lock);
        adap->msix_info_ulds = msix_info;
        return 0;
}

static void free_msix_info(struct adapter *adap)
{
        if (!adap->num_uld)
                return;

        kfree(adap->msix_info_ulds);
        kfree(adap->msix_bmap_ulds.msix_bmap);
}

/* 2 MSI-X vectors needed for the FW queue and non-data interrupts */
#define EXTRA_VECS 2

static int enable_msix(struct adapter *adap)
{
        int ofld_need = 0, uld_need = 0;
        int i, j, want, need, allocated;
        struct sge *s = &adap->sge;
        unsigned int nchan = adap->params.nports;
        struct msix_entry *entries;
        int max_ingq = MAX_INGQ;

        max_ingq += (MAX_OFLD_QSETS * adap->num_uld);
        entries = kmalloc(sizeof(*entries) * (max_ingq + 1),
                          GFP_KERNEL);
        if (!entries)
                return -ENOMEM;

        /* map for msix */
        if (is_pci_uld(adap) && get_msix_info(adap))
                adap->params.crypto = 0;

        for (i = 0; i < max_ingq + 1; ++i)
                entries[i].entry = i;

        want = s->max_ethqsets + EXTRA_VECS;
        if (is_offload(adap)) {
                want += s->rdmaqs + s->rdmaciqs + s->iscsiqsets +
                        s->niscsitq;
                /* need nchan for each possible ULD */
                if (is_t4(adap->params.chip))
                        ofld_need = 3 * nchan;
                else
                        ofld_need = 4 * nchan;
        }
        if (is_pci_uld(adap)) {
                want += netif_get_num_default_rss_queues() * nchan;
                uld_need = nchan;
        }
#ifdef CONFIG_CHELSIO_T4_DCB
        /* For Data Center Bridging we need 8 Ethernet TX Priority Queues for
         * each port.
         */
        need = 8 * adap->params.nports + EXTRA_VECS + ofld_need + uld_need;
#else
        need = adap->params.nports + EXTRA_VECS + ofld_need + uld_need;
#endif
        allocated = pci_enable_msix_range(adap->pdev, entries, need, want);
        if (allocated < 0) {
                dev_info(adap->pdev_dev, "not enough MSI-X vectors left,"
                         " not using MSI-X\n");
                kfree(entries);
                return allocated;
        }

        /* Distribute available vectors to the various queue groups.
         * Every group gets its minimum requirement and NIC gets top
         * priority for leftovers.
         */
        i = allocated - EXTRA_VECS - ofld_need - uld_need;
        if (i < s->max_ethqsets) {
                s->max_ethqsets = i;
                if (i < s->ethqsets)
                        reduce_ethqs(adap, i);
        }
        if (is_pci_uld(adap)) {
                if (allocated < want)
                        s->nqs_per_uld = nchan;
                else
                        s->nqs_per_uld = netif_get_num_default_rss_queues() *
                                        nchan;
        }

        if (is_offload(adap)) {
                if (allocated < want) {
                        s->rdmaqs = nchan;
                        s->rdmaciqs = nchan;

                        if (!is_t4(adap->params.chip))
                                s->niscsitq = nchan;
                }

                /* leftovers go to OFLD */
                i = allocated - EXTRA_VECS - s->max_ethqsets -
                        s->rdmaqs - s->rdmaciqs - s->niscsitq;
                if (is_pci_uld(adap))
                        i -= s->nqs_per_uld * adap->num_uld;
                s->iscsiqsets = (i / nchan) * nchan;  /* round down */

        }

        for (i = 0; i < (allocated - (s->nqs_per_uld * adap->num_uld)); ++i)
                adap->msix_info[i].vec = entries[i].vector;
        if (is_pci_uld(adap)) {
                for (j = 0 ; i < allocated; ++i, j++)
                        adap->msix_info_ulds[j].vec = entries[i].vector;
                adap->msix_bmap_ulds.mapsize = j;
        }
        dev_info(adap->pdev_dev, "%d MSI-X vectors allocated, "
                 "nic %d iscsi %d rdma cpl %d rdma ciq %d uld %d\n",
                 allocated, s->max_ethqsets, s->iscsiqsets, s->rdmaqs,
                 s->rdmaciqs, s->nqs_per_uld);

        kfree(entries);
        return 0;
}

#undef EXTRA_VECS

static int init_rss(struct adapter *adap)
{
        unsigned int i;
        int err;

        err = t4_init_rss_mode(adap, adap->mbox);
        if (err)
                return err;

        for_each_port(adap, i) {
                struct port_info *pi = adap2pinfo(adap, i);

                pi->rss = kcalloc(pi->rss_size, sizeof(u16), GFP_KERNEL);
                if (!pi->rss)
                        return -ENOMEM;
        }
        return 0;
}

static int cxgb4_get_pcie_dev_link_caps(struct adapter *adap,
                                        enum pci_bus_speed *speed,
                                        enum pcie_link_width *width)
{
        u32 lnkcap1, lnkcap2;
        int err1, err2;

#define  PCIE_MLW_CAP_SHIFT 4   /* start of MLW mask in link capabilities */

        *speed = PCI_SPEED_UNKNOWN;
        *width = PCIE_LNK_WIDTH_UNKNOWN;

        err1 = pcie_capability_read_dword(adap->pdev, PCI_EXP_LNKCAP,
                                          &lnkcap1);
        err2 = pcie_capability_read_dword(adap->pdev, PCI_EXP_LNKCAP2,
                                          &lnkcap2);
        if (!err2 && lnkcap2) { /* PCIe r3.0-compliant */
                if (lnkcap2 & PCI_EXP_LNKCAP2_SLS_8_0GB)
                        *speed = PCIE_SPEED_8_0GT;
                else if (lnkcap2 & PCI_EXP_LNKCAP2_SLS_5_0GB)
                        *speed = PCIE_SPEED_5_0GT;
                else if (lnkcap2 & PCI_EXP_LNKCAP2_SLS_2_5GB)
                        *speed = PCIE_SPEED_2_5GT;
        }
        if (!err1) {
                *width = (lnkcap1 & PCI_EXP_LNKCAP_MLW) >> PCIE_MLW_CAP_SHIFT;
                if (!lnkcap2) { /* pre-r3.0 */
                        if (lnkcap1 & PCI_EXP_LNKCAP_SLS_5_0GB)
                                *speed = PCIE_SPEED_5_0GT;
                        else if (lnkcap1 & PCI_EXP_LNKCAP_SLS_2_5GB)
                                *speed = PCIE_SPEED_2_5GT;
                }
        }

        if (*speed == PCI_SPEED_UNKNOWN || *width == PCIE_LNK_WIDTH_UNKNOWN)
                return err1 ? err1 : err2 ? err2 : -EINVAL;
        return 0;
}

static void cxgb4_check_pcie_caps(struct adapter *adap)
{
        enum pcie_link_width width, width_cap;
        enum pci_bus_speed speed, speed_cap;

#define PCIE_SPEED_STR(speed) \
        (speed == PCIE_SPEED_8_0GT ? "8.0GT/s" : \
         speed == PCIE_SPEED_5_0GT ? "5.0GT/s" : \
         speed == PCIE_SPEED_2_5GT ? "2.5GT/s" : \
         "Unknown")

        if (cxgb4_get_pcie_dev_link_caps(adap, &speed_cap, &width_cap)) {
                dev_warn(adap->pdev_dev,
                         "Unable to determine PCIe device BW capabilities\n");
                return;
        }

        if (pcie_get_minimum_link(adap->pdev, &speed, &width) ||
            speed == PCI_SPEED_UNKNOWN || width == PCIE_LNK_WIDTH_UNKNOWN) {
                dev_warn(adap->pdev_dev,
                         "Unable to determine PCI Express bandwidth.\n");
                return;
        }

        dev_info(adap->pdev_dev, "PCIe link speed is %s, device supports %s\n",
                 PCIE_SPEED_STR(speed), PCIE_SPEED_STR(speed_cap));
        dev_info(adap->pdev_dev, "PCIe link width is x%d, device supports x%d\n",
                 width, width_cap);
        if (speed < speed_cap || width < width_cap)
                dev_info(adap->pdev_dev,
                         "A slot with more lanes and/or higher speed is "
                         "suggested for optimal performance.\n");
}

/* Dump basic information about the adapter */
static void print_adapter_info(struct adapter *adapter)
{
        /* Device information */
        dev_info(adapter->pdev_dev, "Chelsio %s rev %d\n",
                 adapter->params.vpd.id,
                 CHELSIO_CHIP_RELEASE(adapter->params.chip));
        dev_info(adapter->pdev_dev, "S/N: %s, P/N: %s\n",
                 adapter->params.vpd.sn, adapter->params.vpd.pn);

        /* Firmware Version */
        if (!adapter->params.fw_vers)
                dev_warn(adapter->pdev_dev, "No firmware loaded\n");
        else
                dev_info(adapter->pdev_dev, "Firmware version: %u.%u.%u.%u\n",
                         FW_HDR_FW_VER_MAJOR_G(adapter->params.fw_vers),
                         FW_HDR_FW_VER_MINOR_G(adapter->params.fw_vers),
                         FW_HDR_FW_VER_MICRO_G(adapter->params.fw_vers),
                         FW_HDR_FW_VER_BUILD_G(adapter->params.fw_vers));

        /* Bootstrap Firmware Version. (Some adapters don't have Bootstrap
         * Firmware, so dev_info() is more appropriate here.)
         */
        if (!adapter->params.bs_vers)
                dev_info(adapter->pdev_dev, "No bootstrap loaded\n");
        else
                dev_info(adapter->pdev_dev, "Bootstrap version: %u.%u.%u.%u\n",
                         FW_HDR_FW_VER_MAJOR_G(adapter->params.bs_vers),
                         FW_HDR_FW_VER_MINOR_G(adapter->params.bs_vers),
                         FW_HDR_FW_VER_MICRO_G(adapter->params.bs_vers),
                         FW_HDR_FW_VER_BUILD_G(adapter->params.bs_vers));

        /* TP Microcode Version */
        if (!adapter->params.tp_vers)
                dev_warn(adapter->pdev_dev, "No TP Microcode loaded\n");
        else
                dev_info(adapter->pdev_dev,
                         "TP Microcode version: %u.%u.%u.%u\n",
                         FW_HDR_FW_VER_MAJOR_G(adapter->params.tp_vers),
                         FW_HDR_FW_VER_MINOR_G(adapter->params.tp_vers),
                         FW_HDR_FW_VER_MICRO_G(adapter->params.tp_vers),
                         FW_HDR_FW_VER_BUILD_G(adapter->params.tp_vers));

        /* Expansion ROM version */
        if (!adapter->params.er_vers)
                dev_info(adapter->pdev_dev, "No Expansion ROM loaded\n");
        else
                dev_info(adapter->pdev_dev,
                         "Expansion ROM version: %u.%u.%u.%u\n",
                         FW_HDR_FW_VER_MAJOR_G(adapter->params.er_vers),
                         FW_HDR_FW_VER_MINOR_G(adapter->params.er_vers),
                         FW_HDR_FW_VER_MICRO_G(adapter->params.er_vers),
                         FW_HDR_FW_VER_BUILD_G(adapter->params.er_vers));

        /* Software/Hardware configuration */
        dev_info(adapter->pdev_dev, "Configuration: %sNIC %s, %s capable\n",
                 is_offload(adapter) ? "R" : "",
                 ((adapter->flags & USING_MSIX) ? "MSI-X" :
                  (adapter->flags & USING_MSI) ? "MSI" : ""),
                 is_offload(adapter) ? "Offload" : "non-Offload");
}

static void print_port_info(const struct net_device *dev)
{
        char buf[80];
        char *bufp = buf;
        const char *spd = "";
        const struct port_info *pi = netdev_priv(dev);
        const struct adapter *adap = pi->adapter;

        if (adap->params.pci.speed == PCI_EXP_LNKSTA_CLS_2_5GB)
                spd = " 2.5 GT/s";
        else if (adap->params.pci.speed == PCI_EXP_LNKSTA_CLS_5_0GB)
                spd = " 5 GT/s";
        else if (adap->params.pci.speed == PCI_EXP_LNKSTA_CLS_8_0GB)
                spd = " 8 GT/s";

        if (pi->link_cfg.supported & FW_PORT_CAP_SPEED_100M)
                bufp += sprintf(bufp, "100/");
        if (pi->link_cfg.supported & FW_PORT_CAP_SPEED_1G)
                bufp += sprintf(bufp, "1000/");
        if (pi->link_cfg.supported & FW_PORT_CAP_SPEED_10G)
                bufp += sprintf(bufp, "10G/");
        if (pi->link_cfg.supported & FW_PORT_CAP_SPEED_40G)
                bufp += sprintf(bufp, "40G/");
        if (bufp != buf)
                --bufp;
        sprintf(bufp, "BASE-%s", t4_get_port_type_description(pi->port_type));

        netdev_info(dev, "%s: Chelsio %s (%s) %s\n",
                    dev->name, adap->params.vpd.id, adap->name, buf);
}

static void enable_pcie_relaxed_ordering(struct pci_dev *dev)
{
        pcie_capability_set_word(dev, PCI_EXP_DEVCTL, PCI_EXP_DEVCTL_RELAX_EN);
}

/*
 * Free the following resources:
 * - memory used for tables
 * - MSI/MSI-X
 * - net devices
 * - resources FW is holding for us
 */
static void free_some_resources(struct adapter *adapter)
{
        unsigned int i;

        t4_free_mem(adapter->l2t);
        t4_cleanup_sched(adapter);
        t4_free_mem(adapter->tids.tid_tab);
        kfree(adapter->sge.egr_map);
        kfree(adapter->sge.ingr_map);
        kfree(adapter->sge.starving_fl);
        kfree(adapter->sge.txq_maperr);
#ifdef CONFIG_DEBUG_FS
        kfree(adapter->sge.blocked_fl);
#endif
        disable_msi(adapter);

        for_each_port(adapter, i)
                if (adapter->port[i]) {
                        struct port_info *pi = adap2pinfo(adapter, i);

                        if (pi->viid != 0)
                                t4_free_vi(adapter, adapter->mbox, adapter->pf,
                                           0, pi->viid);
                        kfree(adap2pinfo(adapter, i)->rss);
                        free_netdev(adapter->port[i]);
                }
        if (adapter->flags & FW_OK)
                t4_fw_bye(adapter, adapter->pf);
}

#define TSO_FLAGS (NETIF_F_TSO | NETIF_F_TSO6 | NETIF_F_TSO_ECN)
#define VLAN_FEAT (NETIF_F_SG | NETIF_F_IP_CSUM | TSO_FLAGS | \
                   NETIF_F_IPV6_CSUM | NETIF_F_HIGHDMA)
#define SEGMENT_SIZE 128

static int get_chip_type(struct pci_dev *pdev, u32 pl_rev)
{
        u16 device_id;

        /* Retrieve adapter's device ID */
        pci_read_config_word(pdev, PCI_DEVICE_ID, &device_id);

        switch (device_id >> 12) {
        case CHELSIO_T4:
                return CHELSIO_CHIP_CODE(CHELSIO_T4, pl_rev);
        case CHELSIO_T5:
                return CHELSIO_CHIP_CODE(CHELSIO_T5, pl_rev);
        case CHELSIO_T6:
                return CHELSIO_CHIP_CODE(CHELSIO_T6, pl_rev);
        default:
                dev_err(&pdev->dev, "Device %d is not supported\n",
                        device_id);
        }
        return -EINVAL;
}

#ifdef CONFIG_PCI_IOV
static void dummy_setup(struct net_device *dev)
{
        dev->type = ARPHRD_NONE;
        dev->mtu = 0;
        dev->hard_header_len = 0;
        dev->addr_len = 0;
        dev->tx_queue_len = 0;
        dev->flags |= IFF_NOARP;
        dev->priv_flags |= IFF_NO_QUEUE;

        /* Initialize the device structure. */
        dev->netdev_ops = &cxgb4_mgmt_netdev_ops;
        dev->ethtool_ops = &cxgb4_mgmt_ethtool_ops;
        dev->destructor = free_netdev;
}

static int config_mgmt_dev(struct pci_dev *pdev)
{
        struct adapter *adap = pci_get_drvdata(pdev);
        struct net_device *netdev;
        struct port_info *pi;
        char name[IFNAMSIZ];
        int err;

        snprintf(name, IFNAMSIZ, "mgmtpf%d%d", adap->adap_idx, adap->pf);
        netdev = alloc_netdev(0, name, NET_NAME_UNKNOWN, dummy_setup);
        if (!netdev)
                return -ENOMEM;

        pi = netdev_priv(netdev);
        pi->adapter = adap;
        SET_NETDEV_DEV(netdev, &pdev->dev);

        adap->port[0] = netdev;

        err = register_netdev(adap->port[0]);
        if (err) {
                pr_info("Unable to register VF mgmt netdev %s\n", name);
                free_netdev(adap->port[0]);
                adap->port[0] = NULL;
                return err;
        }
        return 0;
}

static int cxgb4_iov_configure(struct pci_dev *pdev, int num_vfs)
{
        struct adapter *adap = pci_get_drvdata(pdev);
        int err = 0;
        int current_vfs = pci_num_vf(pdev);
        u32 pcie_fw;

        pcie_fw = readl(adap->regs + PCIE_FW_A);
        /* Check if cxgb4 is the MASTER and fw is initialized */
        if (!(pcie_fw & PCIE_FW_INIT_F) ||
            !(pcie_fw & PCIE_FW_MASTER_VLD_F) ||
            PCIE_FW_MASTER_G(pcie_fw) != 4) {
                dev_warn(&pdev->dev,
                         "cxgb4 driver needs to be MASTER to support SRIOV\n");
                return -EOPNOTSUPP;
        }

        /* If any of the VF's is already assigned to Guest OS, then
         * SRIOV for the same cannot be modified
         */
        if (current_vfs && pci_vfs_assigned(pdev)) {
                dev_err(&pdev->dev,
                        "Cannot modify SR-IOV while VFs are assigned\n");
                num_vfs = current_vfs;
                return num_vfs;
        }

        /* Disable SRIOV when zero is passed.
         * One needs to disable SRIOV before modifying it, else
         * stack throws the below warning:
         * " 'n' VFs already enabled. Disable before enabling 'm' VFs."
         */
        if (!num_vfs) {
                pci_disable_sriov(pdev);
                if (adap->port[0]) {
                        unregister_netdev(adap->port[0]);
                        adap->port[0] = NULL;
                }
                /* free VF resources */
                kfree(adap->vfinfo);
                adap->vfinfo = NULL;
                adap->num_vfs = 0;
                return num_vfs;
        }

        if (num_vfs != current_vfs) {
                err = pci_enable_sriov(pdev, num_vfs);
                if (err)
                        return err;

                adap->num_vfs = num_vfs;
                err = config_mgmt_dev(pdev);
                if (err)
                        return err;
        }

        adap->vfinfo = kcalloc(adap->num_vfs,
                               sizeof(struct vf_info), GFP_KERNEL);
        if (adap->vfinfo)
                fill_vf_station_mac_addr(adap);
        return num_vfs;
}
#endif

static int init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
{
        int func, i, err, s_qpp, qpp, num_seg;
        struct port_info *pi;
        bool highdma = false;
        struct adapter *adapter = NULL;
        struct net_device *netdev;
        void __iomem *regs;
        u32 whoami, pl_rev;
        enum chip_type chip;
        static int adap_idx = 1;

        printk_once(KERN_INFO "%s - version %s\n", DRV_DESC, DRV_VERSION);

        err = pci_request_regions(pdev, KBUILD_MODNAME);
        if (err) {
                /* Just info, some other driver may have claimed the device. */
                dev_info(&pdev->dev, "cannot obtain PCI resources\n");
                return err;
        }

        err = pci_enable_device(pdev);
        if (err) {
                dev_err(&pdev->dev, "cannot enable PCI device\n");
                goto out_release_regions;
        }

        regs = pci_ioremap_bar(pdev, 0);
        if (!regs) {
                dev_err(&pdev->dev, "cannot map device registers\n");
                err = -ENOMEM;
                goto out_disable_device;
        }

        err = t4_wait_dev_ready(regs);
        if (err < 0)
                goto out_unmap_bar0;

        /* We control everything through one PF */
        whoami = readl(regs + PL_WHOAMI_A);
        pl_rev = REV_G(readl(regs + PL_REV_A));
        chip = get_chip_type(pdev, pl_rev);
        func = CHELSIO_CHIP_VERSION(chip) <= CHELSIO_T5 ?
                SOURCEPF_G(whoami) : T6_SOURCEPF_G(whoami);
        if (func != ent->driver_data) {
#ifndef CONFIG_PCI_IOV
                iounmap(regs);
#endif
                pci_disable_device(pdev);
                pci_save_state(pdev);        /* to restore SR-IOV later */
                goto sriov;
        }

        if (!pci_set_dma_mask(pdev, DMA_BIT_MASK(64))) {
                highdma = true;
                err = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(64));
                if (err) {
                        dev_err(&pdev->dev, "unable to obtain 64-bit DMA for "
                                "coherent allocations\n");
                        goto out_unmap_bar0;
                }
        } else {
                err = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
                if (err) {
                        dev_err(&pdev->dev, "no usable DMA configuration\n");
                        goto out_unmap_bar0;
                }
        }

        pci_enable_pcie_error_reporting(pdev);
        enable_pcie_relaxed_ordering(pdev);
        pci_set_master(pdev);
        pci_save_state(pdev);

        adapter = kzalloc(sizeof(*adapter), GFP_KERNEL);
        if (!adapter) {
                err = -ENOMEM;
                goto out_unmap_bar0;
        }
        adap_idx++;

        adapter->workq = create_singlethread_workqueue("cxgb4");
        if (!adapter->workq) {
                err = -ENOMEM;
                goto out_free_adapter;
        }

        adapter->mbox_log = kzalloc(sizeof(*adapter->mbox_log) +
                                    (sizeof(struct mbox_cmd) *
                                     T4_OS_LOG_MBOX_CMDS),
                                    GFP_KERNEL);
        if (!adapter->mbox_log) {
                err = -ENOMEM;
                goto out_free_adapter;
        }
        adapter->mbox_log->size = T4_OS_LOG_MBOX_CMDS;

        /* PCI device has been enabled */
        adapter->flags |= DEV_ENABLED;

        adapter->regs = regs;
        adapter->pdev = pdev;
        adapter->pdev_dev = &pdev->dev;
        adapter->name = pci_name(pdev);
        adapter->mbox = func;
        adapter->pf = func;
        adapter->msg_enable = dflt_msg_enable;
        memset(adapter->chan_map, 0xff, sizeof(adapter->chan_map));

        spin_lock_init(&adapter->stats_lock);
        spin_lock_init(&adapter->tid_release_lock);
        spin_lock_init(&adapter->win0_lock);

        INIT_WORK(&adapter->tid_release_task, process_tid_release_list);
        INIT_WORK(&adapter->db_full_task, process_db_full);
        INIT_WORK(&adapter->db_drop_task, process_db_drop);

        err = t4_prep_adapter(adapter);
        if (err)
                goto out_free_adapter;


        if (!is_t4(adapter->params.chip)) {
                s_qpp = (QUEUESPERPAGEPF0_S +
                        (QUEUESPERPAGEPF1_S - QUEUESPERPAGEPF0_S) *
                        adapter->pf);
                qpp = 1 << QUEUESPERPAGEPF0_G(t4_read_reg(adapter,
                      SGE_EGRESS_QUEUES_PER_PAGE_PF_A) >> s_qpp);
                num_seg = PAGE_SIZE / SEGMENT_SIZE;

                /* Each segment size is 128B. Write coalescing is enabled only
                 * when SGE_EGRESS_QUEUES_PER_PAGE_PF reg value for the
                 * queue is less no of segments that can be accommodated in
                 * a page size.
                 */
                if (qpp > num_seg) {
                        dev_err(&pdev->dev,
                                "Incorrect number of egress queues per page\n");
                        err = -EINVAL;
                        goto out_free_adapter;
                }
                adapter->bar2 = ioremap_wc(pci_resource_start(pdev, 2),
                pci_resource_len(pdev, 2));
                if (!adapter->bar2) {
                        dev_err(&pdev->dev, "cannot map device bar2 region\n");
                        err = -ENOMEM;
                        goto out_free_adapter;
                }
        }

        setup_memwin(adapter);
        err = adap_init0(adapter);
#ifdef CONFIG_DEBUG_FS
        bitmap_zero(adapter->sge.blocked_fl, adapter->sge.egr_sz);
#endif
        setup_memwin_rdma(adapter);
        if (err)
                goto out_unmap_bar;

        /* configure SGE_STAT_CFG_A to read WC stats */
        if (!is_t4(adapter->params.chip))
                t4_write_reg(adapter, SGE_STAT_CFG_A, STATSOURCE_T5_V(7) |
                             (is_t5(adapter->params.chip) ? STATMODE_V(0) :
                              T6_STATMODE_V(0)));

        for_each_port(adapter, i) {
                netdev = alloc_etherdev_mq(sizeof(struct port_info),
                                           MAX_ETH_QSETS);
                if (!netdev) {
                        err = -ENOMEM;
                        goto out_free_dev;
                }

                SET_NETDEV_DEV(netdev, &pdev->dev);

                adapter->port[i] = netdev;
                pi = netdev_priv(netdev);
                pi->adapter = adapter;
                pi->xact_addr_filt = -1;
                pi->port_id = i;
                netdev->irq = pdev->irq;

                netdev->hw_features = NETIF_F_SG | TSO_FLAGS |
                        NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM |
                        NETIF_F_RXCSUM | NETIF_F_RXHASH |
                        NETIF_F_HW_VLAN_CTAG_TX | NETIF_F_HW_VLAN_CTAG_RX;
                if (highdma)
                        netdev->hw_features |= NETIF_F_HIGHDMA;
                netdev->features |= netdev->hw_features;
                netdev->vlan_features = netdev->features & VLAN_FEAT;

                netdev->priv_flags |= IFF_UNICAST_FLT;

                netdev->netdev_ops = &cxgb4_netdev_ops;
#ifdef CONFIG_CHELSIO_T4_DCB
                netdev->dcbnl_ops = &cxgb4_dcb_ops;
                cxgb4_dcb_state_init(netdev);
#endif
                cxgb4_set_ethtool_ops(netdev);
        }

        pci_set_drvdata(pdev, adapter);

        if (adapter->flags & FW_OK) {
                err = t4_port_init(adapter, func, func, 0);
                if (err)
                        goto out_free_dev;
        } else if (adapter->params.nports == 1) {
                /* If we don't have a connection to the firmware -- possibly
                 * because of an error -- grab the raw VPD parameters so we
                 * can set the proper MAC Address on the debug network
                 * interface that we've created.
                 */
                u8 hw_addr[ETH_ALEN];
                u8 *na = adapter->params.vpd.na;

                err = t4_get_raw_vpd_params(adapter, &adapter->params.vpd);
                if (!err) {
                        for (i = 0; i < ETH_ALEN; i++)
                                hw_addr[i] = (hex2val(na[2 * i + 0]) * 16 +
                                              hex2val(na[2 * i + 1]));
                        t4_set_hw_addr(adapter, 0, hw_addr);
                }
        }

        /* Configure queues and allocate tables now, they can be needed as
         * soon as the first register_netdev completes.
         */
        cfg_queues(adapter);

        adapter->l2t = t4_init_l2t(adapter->l2t_start, adapter->l2t_end);
        if (!adapter->l2t) {
                /* We tolerate a lack of L2T, giving up some functionality */
                dev_warn(&pdev->dev, "could not allocate L2T, continuing\n");
                adapter->params.offload = 0;
        }

#if IS_ENABLED(CONFIG_IPV6)
        if ((CHELSIO_CHIP_VERSION(adapter->params.chip) <= CHELSIO_T5) &&
            (!(t4_read_reg(adapter, LE_DB_CONFIG_A) & ASLIPCOMPEN_F))) {
                /* CLIP functionality is not present in hardware,
                 * hence disable all offload features
                 */
                dev_warn(&pdev->dev,
                         "CLIP not enabled in hardware, continuing\n");
                adapter->params.offload = 0;
        } else {
                adapter->clipt = t4_init_clip_tbl(adapter->clipt_start,
                                                  adapter->clipt_end);
                if (!adapter->clipt) {
                        /* We tolerate a lack of clip_table, giving up
                         * some functionality
                         */
                        dev_warn(&pdev->dev,
                                 "could not allocate Clip table, continuing\n");
                        adapter->params.offload = 0;
                }
        }
#endif

        for_each_port(adapter, i) {
                pi = adap2pinfo(adapter, i);
                pi->sched_tbl = t4_init_sched(adapter->params.nsched_cls);
                if (!pi->sched_tbl)
                        dev_warn(&pdev->dev,
                                 "could not activate scheduling on port %d\n",
                                 i);
        }

        if (is_offload(adapter) && tid_init(&adapter->tids) < 0) {
                dev_warn(&pdev->dev, "could not allocate TID table, "
                         "continuing\n");
                adapter->params.offload = 0;
        }

        if (is_offload(adapter)) {
                if (t4_read_reg(adapter, LE_DB_CONFIG_A) & HASHEN_F) {
                        u32 hash_base, hash_reg;

                        if (chip <= CHELSIO_T5) {
                                hash_reg = LE_DB_TID_HASHBASE_A;
                                hash_base = t4_read_reg(adapter, hash_reg);
                                adapter->tids.hash_base = hash_base / 4;
                        } else {
                                hash_reg = T6_LE_DB_HASH_TID_BASE_A;
                                hash_base = t4_read_reg(adapter, hash_reg);
                                adapter->tids.hash_base = hash_base;
                        }
                }
        }

        /* See what interrupts we'll be using */
        if (msi > 1 && enable_msix(adapter) == 0)
                adapter->flags |= USING_MSIX;
        else if (msi > 0 && pci_enable_msi(pdev) == 0) {
                adapter->flags |= USING_MSI;
                if (msi > 1)
                        free_msix_info(adapter);
        }

        /* check for PCI Express bandwidth capabiltites */
        cxgb4_check_pcie_caps(adapter);

        err = init_rss(adapter);
        if (err)
                goto out_free_dev;

        /*
         * The card is now ready to go.  If any errors occur during device
         * registration we do not fail the whole card but rather proceed only
         * with the ports we manage to register successfully.  However we must
         * register at least one net device.
         */
        for_each_port(adapter, i) {
                pi = adap2pinfo(adapter, i);
                netif_set_real_num_tx_queues(adapter->port[i], pi->nqsets);
                netif_set_real_num_rx_queues(adapter->port[i], pi->nqsets);

                err = register_netdev(adapter->port[i]);
                if (err)
                        break;
                adapter->chan_map[pi->tx_chan] = i;
                print_port_info(adapter->port[i]);
        }
        if (i == 0) {
                dev_err(&pdev->dev, "could not register any net devices\n");
                goto out_free_dev;
        }
        if (err) {
                dev_warn(&pdev->dev, "only %d net devices registered\n", i);
                err = 0;
        }

        if (cxgb4_debugfs_root) {
                adapter->debugfs_root = debugfs_create_dir(pci_name(pdev),
                                                           cxgb4_debugfs_root);
                setup_debugfs(adapter);
        }

        /* PCIe EEH recovery on powerpc platforms needs fundamental reset */
        pdev->needs_freset = 1;

        if (is_offload(adapter))
                attach_ulds(adapter);

        print_adapter_info(adapter);
        return 0;

sriov:
#ifdef CONFIG_PCI_IOV
        if (func < ARRAY_SIZE(num_vf) && num_vf[func] > 0) {
                dev_warn(&pdev->dev,
                         "Enabling SR-IOV VFs using the num_vf module "
                         "parameter is deprecated - please use the pci sysfs "
                         "interface instead.\n");
                if (pci_enable_sriov(pdev, num_vf[func]) == 0)
                        dev_info(&pdev->dev,
                                 "instantiated %u virtual functions\n",
                                 num_vf[func]);
        }

        adapter = kzalloc(sizeof(*adapter), GFP_KERNEL);
        if (!adapter) {
                err = -ENOMEM;
                goto free_pci_region;
        }

        adapter->pdev = pdev;
        adapter->pdev_dev = &pdev->dev;
        adapter->name = pci_name(pdev);
        adapter->mbox = func;
        adapter->pf = func;
        adapter->regs = regs;
        adapter->adap_idx = adap_idx;
        adapter->mbox_log = kzalloc(sizeof(*adapter->mbox_log) +
                                    (sizeof(struct mbox_cmd) *
                                     T4_OS_LOG_MBOX_CMDS),
                                    GFP_KERNEL);
        if (!adapter->mbox_log) {
                err = -ENOMEM;
                goto free_adapter;
        }
        pci_set_drvdata(pdev, adapter);
        return 0;

 free_adapter:
        kfree(adapter);
 free_pci_region:
        iounmap(regs);
        pci_disable_sriov(pdev);
        pci_release_regions(pdev);
        return err;
#else
        return 0;
#endif

 out_free_dev:
        free_some_resources(adapter);
        if (adapter->flags & USING_MSIX)
                free_msix_info(adapter);
        if (adapter->num_uld)
                uld_mem_free(adapter);
 out_unmap_bar:
        if (!is_t4(adapter->params.chip))
                iounmap(adapter->bar2);
 out_free_adapter:
        if (adapter->workq)
                destroy_workqueue(adapter->workq);

        kfree(adapter->mbox_log);
        kfree(adapter);
 out_unmap_bar0:
        iounmap(regs);
 out_disable_device:
        pci_disable_pcie_error_reporting(pdev);
        pci_disable_device(pdev);
 out_release_regions:
        pci_release_regions(pdev);
        return err;
}

static void remove_one(struct pci_dev *pdev)
{
        struct adapter *adapter = pci_get_drvdata(pdev);

        if (!adapter) {
                pci_release_regions(pdev);
                return;
        }

        if (adapter->pf == 4) {
                int i;

                /* Tear down per-adapter Work Queue first since it can contain
                 * references to our adapter data structure.
                 */
                destroy_workqueue(adapter->workq);

                if (is_offload(adapter))
                        detach_ulds(adapter);

                disable_interrupts(adapter);

                for_each_port(adapter, i)
                        if (adapter->port[i]->reg_state == NETREG_REGISTERED)
                                unregister_netdev(adapter->port[i]);

                debugfs_remove_recursive(adapter->debugfs_root);

                /* If we allocated filters, free up state associated with any
                 * valid filters ...
                 */
                if (adapter->tids.ftid_tab) {
                        struct filter_entry *f = &adapter->tids.ftid_tab[0];
                        for (i = 0; i < (adapter->tids.nftids +
                                        adapter->tids.nsftids); i++, f++)
                                if (f->valid)
                                        clear_filter(adapter, f);
                }

                if (adapter->flags & FULL_INIT_DONE)
                        cxgb_down(adapter);

                if (adapter->flags & USING_MSIX)
                        free_msix_info(adapter);
                if (adapter->num_uld)
                        uld_mem_free(adapter);
                free_some_resources(adapter);
#if IS_ENABLED(CONFIG_IPV6)
                t4_cleanup_clip_tbl(adapter);
#endif
                iounmap(adapter->regs);
                if (!is_t4(adapter->params.chip))
                        iounmap(adapter->bar2);
                pci_disable_pcie_error_reporting(pdev);
                if ((adapter->flags & DEV_ENABLED)) {
                        pci_disable_device(pdev);
                        adapter->flags &= ~DEV_ENABLED;
                }
                pci_release_regions(pdev);
                kfree(adapter->mbox_log);
                synchronize_rcu();
                kfree(adapter);
        }
#ifdef CONFIG_PCI_IOV
        else {
                if (adapter->port[0])
                        unregister_netdev(adapter->port[0]);
                iounmap(adapter->regs);
                kfree(adapter->vfinfo);
                kfree(adapter);
                pci_disable_sriov(pdev);
                pci_release_regions(pdev);
        }
#endif
}

static struct pci_driver cxgb4_driver = {
        .name     = KBUILD_MODNAME,
        .id_table = cxgb4_pci_tbl,
        .probe    = init_one,
        .remove   = remove_one,
        .shutdown = remove_one,
#ifdef CONFIG_PCI_IOV
        .sriov_configure = cxgb4_iov_configure,
#endif
        .err_handler = &cxgb4_eeh,
};

static int __init cxgb4_init_module(void)
{
        int ret;

        /* Debugfs support is optional, just warn if this fails */
        cxgb4_debugfs_root = debugfs_create_dir(KBUILD_MODNAME, NULL);
        if (!cxgb4_debugfs_root)
                pr_warn("could not create debugfs entry, continuing\n");

        ret = pci_register_driver(&cxgb4_driver);
        if (ret < 0)
                debugfs_remove(cxgb4_debugfs_root);

#if IS_ENABLED(CONFIG_IPV6)
        if (!inet6addr_registered) {
                register_inet6addr_notifier(&cxgb4_inet6addr_notifier);
                inet6addr_registered = true;
        }
#endif

        return ret;
}

static void __exit cxgb4_cleanup_module(void)
{
#if IS_ENABLED(CONFIG_IPV6)
        if (inet6addr_registered) {
                unregister_inet6addr_notifier(&cxgb4_inet6addr_notifier);
                inet6addr_registered = false;
        }
#endif
        pci_unregister_driver(&cxgb4_driver);
        debugfs_remove(cxgb4_debugfs_root);  /* NULL ok */
}

module_init(cxgb4_init_module);
module_exit(cxgb4_cleanup_module);