Merge tag 'cris-for-3.14' of git://jni.nu/cris
[cascardo/linux.git] / drivers / net / ethernet / marvell / mvmdio.c
1 /*
2  * Driver for the MDIO interface of Marvell network interfaces.
3  *
4  * Since the MDIO interface of Marvell network interfaces is shared
5  * between all network interfaces, having a single driver allows to
6  * handle concurrent accesses properly (you may have four Ethernet
7  * ports, but they in fact share the same SMI interface to access
8  * the MDIO bus). This driver is currently used by the mvneta and
9  * mv643xx_eth drivers.
10  *
11  * Copyright (C) 2012 Marvell
12  *
13  * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
14  *
15  * This file is licensed under the terms of the GNU General Public
16  * License version 2. This program is licensed "as is" without any
17  * warranty of any kind, whether express or implied.
18  */
19
20 #include <linux/kernel.h>
21 #include <linux/module.h>
22 #include <linux/mutex.h>
23 #include <linux/phy.h>
24 #include <linux/interrupt.h>
25 #include <linux/platform_device.h>
26 #include <linux/delay.h>
27 #include <linux/io.h>
28 #include <linux/clk.h>
29 #include <linux/of_mdio.h>
30 #include <linux/sched.h>
31 #include <linux/wait.h>
32
33 #define MVMDIO_SMI_DATA_SHIFT              0
34 #define MVMDIO_SMI_PHY_ADDR_SHIFT          16
35 #define MVMDIO_SMI_PHY_REG_SHIFT           21
36 #define MVMDIO_SMI_READ_OPERATION          BIT(26)
37 #define MVMDIO_SMI_WRITE_OPERATION         0
38 #define MVMDIO_SMI_READ_VALID              BIT(27)
39 #define MVMDIO_SMI_BUSY                    BIT(28)
40 #define MVMDIO_ERR_INT_CAUSE               0x007C
41 #define  MVMDIO_ERR_INT_SMI_DONE           0x00000010
42 #define MVMDIO_ERR_INT_MASK                0x0080
43
44 /*
45  * SMI Timeout measurements:
46  * - Kirkwood 88F6281 (Globalscale Dreamplug): 45us to 95us (Interrupt)
47  * - Armada 370       (Globalscale Mirabox):   41us to 43us (Polled)
48  */
49 #define MVMDIO_SMI_TIMEOUT                 1000 /* 1000us = 1ms */
50 #define MVMDIO_SMI_POLL_INTERVAL_MIN       45
51 #define MVMDIO_SMI_POLL_INTERVAL_MAX       55
52
53 struct orion_mdio_dev {
54         struct mutex lock;
55         void __iomem *regs;
56         struct clk *clk;
57         /*
58          * If we have access to the error interrupt pin (which is
59          * somewhat misnamed as it not only reflects internal errors
60          * but also reflects SMI completion), use that to wait for
61          * SMI access completion instead of polling the SMI busy bit.
62          */
63         int err_interrupt;
64         wait_queue_head_t smi_busy_wait;
65 };
66
67 static int orion_mdio_smi_is_done(struct orion_mdio_dev *dev)
68 {
69         return !(readl(dev->regs) & MVMDIO_SMI_BUSY);
70 }
71
72 /* Wait for the SMI unit to be ready for another operation
73  */
74 static int orion_mdio_wait_ready(struct mii_bus *bus)
75 {
76         struct orion_mdio_dev *dev = bus->priv;
77         unsigned long timeout = usecs_to_jiffies(MVMDIO_SMI_TIMEOUT);
78         unsigned long end = jiffies + timeout;
79         int timedout = 0;
80
81         while (1) {
82                 if (orion_mdio_smi_is_done(dev))
83                         return 0;
84                 else if (timedout)
85                         break;
86
87                 if (dev->err_interrupt <= 0) {
88                         usleep_range(MVMDIO_SMI_POLL_INTERVAL_MIN,
89                                      MVMDIO_SMI_POLL_INTERVAL_MAX);
90
91                         if (time_is_before_jiffies(end))
92                                 ++timedout;
93                 } else {
94                         /* wait_event_timeout does not guarantee a delay of at
95                          * least one whole jiffie, so timeout must be no less
96                          * than two.
97                          */
98                         if (timeout < 2)
99                                 timeout = 2;
100                         wait_event_timeout(dev->smi_busy_wait,
101                                            orion_mdio_smi_is_done(dev),
102                                            timeout);
103
104                         ++timedout;
105                 }
106         }
107
108         dev_err(bus->parent, "Timeout: SMI busy for too long\n");
109         return  -ETIMEDOUT;
110 }
111
112 static int orion_mdio_read(struct mii_bus *bus, int mii_id,
113                            int regnum)
114 {
115         struct orion_mdio_dev *dev = bus->priv;
116         u32 val;
117         int ret;
118
119         mutex_lock(&dev->lock);
120
121         ret = orion_mdio_wait_ready(bus);
122         if (ret < 0)
123                 goto out;
124
125         writel(((mii_id << MVMDIO_SMI_PHY_ADDR_SHIFT) |
126                 (regnum << MVMDIO_SMI_PHY_REG_SHIFT)  |
127                 MVMDIO_SMI_READ_OPERATION),
128                dev->regs);
129
130         ret = orion_mdio_wait_ready(bus);
131         if (ret < 0)
132                 goto out;
133
134         val = readl(dev->regs);
135         if (!(val & MVMDIO_SMI_READ_VALID)) {
136                 dev_err(bus->parent, "SMI bus read not valid\n");
137                 ret = -ENODEV;
138                 goto out;
139         }
140
141         ret = val & 0xFFFF;
142 out:
143         mutex_unlock(&dev->lock);
144         return ret;
145 }
146
147 static int orion_mdio_write(struct mii_bus *bus, int mii_id,
148                             int regnum, u16 value)
149 {
150         struct orion_mdio_dev *dev = bus->priv;
151         int ret;
152
153         mutex_lock(&dev->lock);
154
155         ret = orion_mdio_wait_ready(bus);
156         if (ret < 0)
157                 goto out;
158
159         writel(((mii_id << MVMDIO_SMI_PHY_ADDR_SHIFT) |
160                 (regnum << MVMDIO_SMI_PHY_REG_SHIFT)  |
161                 MVMDIO_SMI_WRITE_OPERATION            |
162                 (value << MVMDIO_SMI_DATA_SHIFT)),
163                dev->regs);
164
165 out:
166         mutex_unlock(&dev->lock);
167         return ret;
168 }
169
170 static int orion_mdio_reset(struct mii_bus *bus)
171 {
172         return 0;
173 }
174
175 static irqreturn_t orion_mdio_err_irq(int irq, void *dev_id)
176 {
177         struct orion_mdio_dev *dev = dev_id;
178
179         if (readl(dev->regs + MVMDIO_ERR_INT_CAUSE) &
180                         MVMDIO_ERR_INT_SMI_DONE) {
181                 writel(~MVMDIO_ERR_INT_SMI_DONE,
182                                 dev->regs + MVMDIO_ERR_INT_CAUSE);
183                 wake_up(&dev->smi_busy_wait);
184                 return IRQ_HANDLED;
185         }
186
187         return IRQ_NONE;
188 }
189
190 static int orion_mdio_probe(struct platform_device *pdev)
191 {
192         struct resource *r;
193         struct mii_bus *bus;
194         struct orion_mdio_dev *dev;
195         int i, ret;
196
197         r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
198         if (!r) {
199                 dev_err(&pdev->dev, "No SMI register address given\n");
200                 return -ENODEV;
201         }
202
203         bus = mdiobus_alloc_size(sizeof(struct orion_mdio_dev));
204         if (!bus) {
205                 dev_err(&pdev->dev, "Cannot allocate MDIO bus\n");
206                 return -ENOMEM;
207         }
208
209         bus->name = "orion_mdio_bus";
210         bus->read = orion_mdio_read;
211         bus->write = orion_mdio_write;
212         bus->reset = orion_mdio_reset;
213         snprintf(bus->id, MII_BUS_ID_SIZE, "%s-mii",
214                  dev_name(&pdev->dev));
215         bus->parent = &pdev->dev;
216
217         bus->irq = kmalloc(sizeof(int) * PHY_MAX_ADDR, GFP_KERNEL);
218         if (!bus->irq) {
219                 mdiobus_free(bus);
220                 return -ENOMEM;
221         }
222
223         for (i = 0; i < PHY_MAX_ADDR; i++)
224                 bus->irq[i] = PHY_POLL;
225
226         dev = bus->priv;
227         dev->regs = devm_ioremap(&pdev->dev, r->start, resource_size(r));
228         if (!dev->regs) {
229                 dev_err(&pdev->dev, "Unable to remap SMI register\n");
230                 ret = -ENODEV;
231                 goto out_mdio;
232         }
233
234         init_waitqueue_head(&dev->smi_busy_wait);
235
236         dev->clk = devm_clk_get(&pdev->dev, NULL);
237         if (!IS_ERR(dev->clk))
238                 clk_prepare_enable(dev->clk);
239
240         dev->err_interrupt = platform_get_irq(pdev, 0);
241         if (dev->err_interrupt != -ENXIO) {
242                 ret = devm_request_irq(&pdev->dev, dev->err_interrupt,
243                                         orion_mdio_err_irq,
244                                         IRQF_SHARED, pdev->name, dev);
245                 if (ret)
246                         goto out_mdio;
247
248                 writel(MVMDIO_ERR_INT_SMI_DONE,
249                         dev->regs + MVMDIO_ERR_INT_MASK);
250         }
251
252         mutex_init(&dev->lock);
253
254         if (pdev->dev.of_node)
255                 ret = of_mdiobus_register(bus, pdev->dev.of_node);
256         else
257                 ret = mdiobus_register(bus);
258         if (ret < 0) {
259                 dev_err(&pdev->dev, "Cannot register MDIO bus (%d)\n", ret);
260                 goto out_mdio;
261         }
262
263         platform_set_drvdata(pdev, bus);
264
265         return 0;
266
267 out_mdio:
268         if (!IS_ERR(dev->clk))
269                 clk_disable_unprepare(dev->clk);
270         kfree(bus->irq);
271         mdiobus_free(bus);
272         return ret;
273 }
274
275 static int orion_mdio_remove(struct platform_device *pdev)
276 {
277         struct mii_bus *bus = platform_get_drvdata(pdev);
278         struct orion_mdio_dev *dev = bus->priv;
279
280         writel(0, dev->regs + MVMDIO_ERR_INT_MASK);
281         mdiobus_unregister(bus);
282         kfree(bus->irq);
283         mdiobus_free(bus);
284         if (!IS_ERR(dev->clk))
285                 clk_disable_unprepare(dev->clk);
286
287         return 0;
288 }
289
290 static const struct of_device_id orion_mdio_match[] = {
291         { .compatible = "marvell,orion-mdio" },
292         { }
293 };
294 MODULE_DEVICE_TABLE(of, orion_mdio_match);
295
296 static struct platform_driver orion_mdio_driver = {
297         .probe = orion_mdio_probe,
298         .remove = orion_mdio_remove,
299         .driver = {
300                 .name = "orion-mdio",
301                 .of_match_table = orion_mdio_match,
302         },
303 };
304
305 module_platform_driver(orion_mdio_driver);
306
307 MODULE_DESCRIPTION("Marvell MDIO interface driver");
308 MODULE_AUTHOR("Thomas Petazzoni <thomas.petazzoni@free-electrons.com>");
309 MODULE_LICENSE("GPL");
310 MODULE_ALIAS("platform:orion-mdio");