drivers/scsi/qla4xxx/ql4_os.c

   1 /*
   2  * QLogic iSCSI HBA Driver
   3  * Copyright (c)  2003-2006 QLogic Corporation
   4  *
   5  * See LICENSE.qla4xxx for copyright and licensing details.
   6  */
   7 #include <linux/moduleparam.h>
   8
   9 #include <scsi/scsi_tcq.h>
  10 #include <scsi/scsicam.h>
  11
  12 #include "ql4_def.h"
  13
  14 /*
  15  * Driver version
  16  */
  17 char qla4xxx_version_str[40];
  18
  19 /*
  20  * SRB allocation cache
  21  */
  22 static kmem_cache_t *srb_cachep;
  23
  24 /*
  25  * Module parameter information and variables
  26  */
  27 int ql4xdiscoverywait = 60;
  28 module_param(ql4xdiscoverywait, int, S_IRUGO | S_IRUSR);
  29 MODULE_PARM_DESC(ql4xdiscoverywait, "Discovery wait time");
  30 int ql4xdontresethba = 0;
  31 module_param(ql4xdontresethba, int, S_IRUGO | S_IRUSR);
  32 MODULE_PARM_DESC(ql4xdontresethba,
  33                  "Dont reset the HBA when the driver gets 0x8002 AEN "
  34                  " default it will reset hba :0"
  35                  " set to 1 to avoid resetting HBA");
  36
  37 int ql4xextended_error_logging = 0; /* 0 = off, 1 = log errors */
  38 module_param(ql4xextended_error_logging, int, S_IRUGO | S_IRUSR);
  39 MODULE_PARM_DESC(ql4xextended_error_logging,
  40                  "Option to enable extended error logging, "
  41                  "Default is 0 - no logging, 1 - debug logging");
  42
  43 /*
  44  * SCSI host template entry points
  45  */
  46
  47 void qla4xxx_config_dma_addressing(struct scsi_qla_host *ha);
  48
  49 /*
  50  * iSCSI template entry points
  51  */
  52 static int qla4xxx_tgt_dscvr(enum iscsi_tgt_dscvr type, uint32_t host_no,
  53                              uint32_t enable, struct sockaddr *dst_addr);
  54 static int qla4xxx_conn_get_param(struct iscsi_cls_conn *conn,
  55                                   enum iscsi_param param, char *buf);
  56 static int qla4xxx_sess_get_param(struct iscsi_cls_session *sess,
  57                                   enum iscsi_param param, char *buf);
  58 static void qla4xxx_conn_stop(struct iscsi_cls_conn *conn, int flag);
  59 static int qla4xxx_conn_start(struct iscsi_cls_conn *conn);
  60 static void qla4xxx_recovery_timedout(struct iscsi_cls_session *session);
  61
  62 /*
  63  * SCSI host template entry points
  64  */
  65 static int qla4xxx_queuecommand(struct scsi_cmnd *cmd,
  66                                 void (*done) (struct scsi_cmnd *));
  67 static int qla4xxx_eh_device_reset(struct scsi_cmnd *cmd);
  68 static int qla4xxx_eh_host_reset(struct scsi_cmnd *cmd);
  69 static int qla4xxx_slave_alloc(struct scsi_device *device);
  70 static int qla4xxx_slave_configure(struct scsi_device *device);
  71 static void qla4xxx_slave_destroy(struct scsi_device *sdev);
  72
  73 static struct scsi_host_template qla4xxx_driver_template = {
  74         .module                 = THIS_MODULE,
  75         .name                   = DRIVER_NAME,
  76         .proc_name              = DRIVER_NAME,
  77         .queuecommand           = qla4xxx_queuecommand,
  78
  79         .eh_device_reset_handler = qla4xxx_eh_device_reset,
  80         .eh_host_reset_handler  = qla4xxx_eh_host_reset,
  81
  82         .slave_configure        = qla4xxx_slave_configure,
  83         .slave_alloc            = qla4xxx_slave_alloc,
  84         .slave_destroy          = qla4xxx_slave_destroy,
  85
  86         .this_id                = -1,
  87         .cmd_per_lun            = 3,
  88         .use_clustering         = ENABLE_CLUSTERING,
  89         .sg_tablesize           = SG_ALL,
  90
  91         .max_sectors            = 0xFFFF,
  92 };
  93
  94 static struct iscsi_transport qla4xxx_iscsi_transport = {
  95         .owner                  = THIS_MODULE,
  96         .name                   = DRIVER_NAME,
  97         .param_mask             = ISCSI_CONN_PORT |
  98                                   ISCSI_CONN_ADDRESS |
  99                                   ISCSI_TARGET_NAME |
 100                                   ISCSI_TPGT,
 101         .sessiondata_size       = sizeof(struct ddb_entry),
 102         .host_template          = &qla4xxx_driver_template,
 103
 104         .tgt_dscvr              = qla4xxx_tgt_dscvr,
 105         .get_conn_param         = qla4xxx_conn_get_param,
 106         .get_session_param      = qla4xxx_sess_get_param,
 107         .start_conn             = qla4xxx_conn_start,
 108         .stop_conn              = qla4xxx_conn_stop,
 109         .session_recovery_timedout = qla4xxx_recovery_timedout,
 110 };
 111
 112 static struct scsi_transport_template *qla4xxx_scsi_transport;
 113
 114 static void qla4xxx_recovery_timedout(struct iscsi_cls_session *session)
 115 {
 116         struct ddb_entry *ddb_entry = session->dd_data;
 117         struct scsi_qla_host *ha = ddb_entry->ha;
 118
 119         DEBUG2(printk("scsi%ld: %s: index [%d] port down retry count of (%d) "
 120                       "secs exhausted, marking device DEAD.\n", ha->host_no,
 121                       __func__, ddb_entry->fw_ddb_index,
 122                       ha->port_down_retry_count));
 123
 124         atomic_set(&ddb_entry->state, DDB_STATE_DEAD);
 125
 126         DEBUG2(printk("scsi%ld: %s: scheduling dpc routine - dpc flags = "
 127                       "0x%lx\n", ha->host_no, __func__, ha->dpc_flags));
 128         queue_work(ha->dpc_thread, &ha->dpc_work);
 129 }
 130
 131 static int qla4xxx_conn_start(struct iscsi_cls_conn *conn)
 132 {
 133         struct iscsi_cls_session *session;
 134         struct ddb_entry *ddb_entry;
 135
 136         session = iscsi_dev_to_session(conn->dev.parent);
 137         ddb_entry = session->dd_data;
 138
 139         DEBUG2(printk("scsi%ld: %s: index [%d] starting conn\n",
 140                       ddb_entry->ha->host_no, __func__,
 141                       ddb_entry->fw_ddb_index));
 142         iscsi_unblock_session(session);
 143         return 0;
 144 }
 145
 146 static void qla4xxx_conn_stop(struct iscsi_cls_conn *conn, int flag)
 147 {
 148         struct iscsi_cls_session *session;
 149         struct ddb_entry *ddb_entry;
 150
 151         session = iscsi_dev_to_session(conn->dev.parent);
 152         ddb_entry = session->dd_data;
 153
 154         DEBUG2(printk("scsi%ld: %s: index [%d] stopping conn\n",
 155                       ddb_entry->ha->host_no, __func__,
 156                       ddb_entry->fw_ddb_index));
 157         if (flag == STOP_CONN_RECOVER)
 158                 iscsi_block_session(session);
 159         else
 160                 printk(KERN_ERR "iscsi: invalid stop flag %d\n", flag);
 161 }
 162
 163 static int qla4xxx_sess_get_param(struct iscsi_cls_session *sess,
 164                                   enum iscsi_param param, char *buf)
 165 {
 166         struct ddb_entry *ddb_entry = sess->dd_data;
 167         int len;
 168
 169         switch (param) {
 170         case ISCSI_PARAM_TARGET_NAME:
 171                 len = snprintf(buf, PAGE_SIZE - 1, "%s\n",
 172                                ddb_entry->iscsi_name);
 173                 break;
 174         case ISCSI_PARAM_TPGT:
 175                 len = sprintf(buf, "%u\n", ddb_entry->tpgt);
 176                 break;
 177         default:
 178                 return -ENOSYS;
 179         }
 180
 181         return len;
 182 }
 183
 184 static int qla4xxx_conn_get_param(struct iscsi_cls_conn *conn,
 185                                   enum iscsi_param param, char *buf)
 186 {
 187         struct iscsi_cls_session *session;
 188         struct ddb_entry *ddb_entry;
 189         int len;
 190
 191         session = iscsi_dev_to_session(conn->dev.parent);
 192         ddb_entry = session->dd_data;
 193
 194         switch (param) {
 195         case ISCSI_PARAM_CONN_PORT:
 196                 len = sprintf(buf, "%hu\n", ddb_entry->port);
 197                 break;
 198         case ISCSI_PARAM_CONN_ADDRESS:
 199                 /* TODO: what are the ipv6 bits */
 200                 len = sprintf(buf, "%u.%u.%u.%u\n",
 201                               NIPQUAD(ddb_entry->ip_addr));
 202                 break;
 203         default:
 204                 return -ENOSYS;
 205         }
 206
 207         return len;
 208 }
 209
 210 static int qla4xxx_tgt_dscvr(enum iscsi_tgt_dscvr type, uint32_t host_no,
 211                              uint32_t enable, struct sockaddr *dst_addr)
 212 {
 213         struct scsi_qla_host *ha;
 214         struct Scsi_Host *shost;
 215         struct sockaddr_in *addr;
 216         struct sockaddr_in6 *addr6;
 217         int ret = 0;
 218
 219         shost = scsi_host_lookup(host_no);
 220         if (IS_ERR(shost)) {
 221                 printk(KERN_ERR "Could not find host no %u\n", host_no);
 222                 return -ENODEV;
 223         }
 224
 225         ha = (struct scsi_qla_host *) shost->hostdata;
 226
 227         switch (type) {
 228         case ISCSI_TGT_DSCVR_SEND_TARGETS:
 229                 if (dst_addr->sa_family == AF_INET) {
 230                         addr = (struct sockaddr_in *)dst_addr;
 231                         if (qla4xxx_send_tgts(ha, (char *)&addr->sin_addr,
 232                                               addr->sin_port) != QLA_SUCCESS)
 233                                 ret = -EIO;
 234                 } else if (dst_addr->sa_family == AF_INET6) {
 235                         /*
 236                          * TODO: fix qla4xxx_send_tgts
 237                          */
 238                         addr6 = (struct sockaddr_in6 *)dst_addr;
 239                         if (qla4xxx_send_tgts(ha, (char *)&addr6->sin6_addr,
 240                                               addr6->sin6_port) != QLA_SUCCESS)
 241                                 ret = -EIO;
 242                 } else
 243                         ret = -ENOSYS;
 244                 break;
 245         default:
 246                 ret = -ENOSYS;
 247         }
 248
 249         scsi_host_put(shost);
 250         return ret;
 251 }
 252
 253 void qla4xxx_destroy_sess(struct ddb_entry *ddb_entry)
 254 {
 255         if (!ddb_entry->sess)
 256                 return;
 257
 258         if (ddb_entry->conn) {
 259                 iscsi_if_destroy_session_done(ddb_entry->conn);
 260                 iscsi_destroy_conn(ddb_entry->conn);
 261                 iscsi_remove_session(ddb_entry->sess);
 262         }
 263         iscsi_free_session(ddb_entry->sess);
 264 }
 265
 266 int qla4xxx_add_sess(struct ddb_entry *ddb_entry)
 267 {
 268         int err;
 269
 270         err = iscsi_add_session(ddb_entry->sess, ddb_entry->fw_ddb_index);
 271         if (err) {
 272                 DEBUG2(printk(KERN_ERR "Could not add session.\n"));
 273                 return err;
 274         }
 275
 276         ddb_entry->conn = iscsi_create_conn(ddb_entry->sess, 0);
 277         if (!ddb_entry->conn) {
 278                 iscsi_remove_session(ddb_entry->sess);
 279                 DEBUG2(printk(KERN_ERR "Could not add connection.\n"));
 280                 return -ENOMEM;
 281         }
 282
 283         ddb_entry->sess->recovery_tmo = ddb_entry->ha->port_down_retry_count;
 284         iscsi_if_create_session_done(ddb_entry->conn);
 285         return 0;
 286 }
 287
 288 struct ddb_entry *qla4xxx_alloc_sess(struct scsi_qla_host *ha)
 289 {
 290         struct ddb_entry *ddb_entry;
 291         struct iscsi_cls_session *sess;
 292
 293         sess = iscsi_alloc_session(ha->host, &qla4xxx_iscsi_transport);
 294         if (!sess)
 295                 return NULL;
 296
 297         ddb_entry = sess->dd_data;
 298         memset(ddb_entry, 0, sizeof(*ddb_entry));
 299         ddb_entry->ha = ha;
 300         ddb_entry->sess = sess;
 301         return ddb_entry;
 302 }
 303
 304 /*
 305  * Timer routines
 306  */
 307
 308 static void qla4xxx_start_timer(struct scsi_qla_host *ha, void *func,
 309                                 unsigned long interval)
 310 {
 311         DEBUG(printk("scsi: %s: Starting timer thread for adapter %d\n",
 312                      __func__, ha->host->host_no));
 313         init_timer(&ha->timer);
 314         ha->timer.expires = jiffies + interval * HZ;
 315         ha->timer.data = (unsigned long)ha;
 316         ha->timer.function = (void (*)(unsigned long))func;
 317         add_timer(&ha->timer);
 318         ha->timer_active = 1;
 319 }
 320
 321 static void qla4xxx_stop_timer(struct scsi_qla_host *ha)
 322 {
 323         del_timer_sync(&ha->timer);
 324         ha->timer_active = 0;
 325 }
 326
 327 /***
 328  * qla4xxx_mark_device_missing - mark a device as missing.
 329  * @ha: Pointer to host adapter structure.
 330  * @ddb_entry: Pointer to device database entry
 331  *
 332  * This routine marks a device missing and resets the relogin retry count.
 333  **/
 334 void qla4xxx_mark_device_missing(struct scsi_qla_host *ha,
 335                                  struct ddb_entry *ddb_entry)
 336 {
 337         atomic_set(&ddb_entry->state, DDB_STATE_MISSING);
 338         DEBUG3(printk("scsi%d:%d:%d: index [%d] marked MISSING\n",
 339                       ha->host_no, ddb_entry->bus, ddb_entry->target,
 340                       ddb_entry->fw_ddb_index));
 341         iscsi_conn_error(ddb_entry->conn, ISCSI_ERR_CONN_FAILED);
 342 }
 343
 344 static struct srb* qla4xxx_get_new_srb(struct scsi_qla_host *ha,
 345                                        struct ddb_entry *ddb_entry,
 346                                        struct scsi_cmnd *cmd,
 347                                        void (*done)(struct scsi_cmnd *))
 348 {
 349         struct srb *srb;
 350
 351         srb = mempool_alloc(ha->srb_mempool, GFP_ATOMIC);
 352         if (!srb)
 353                 return srb;
 354
 355         atomic_set(&srb->ref_count, 1);
 356         srb->ha = ha;
 357         srb->ddb = ddb_entry;
 358         srb->cmd = cmd;
 359         srb->flags = 0;
 360         cmd->SCp.ptr = (void *)srb;
 361         cmd->scsi_done = done;
 362
 363         return srb;
 364 }
 365
 366 static void qla4xxx_srb_free_dma(struct scsi_qla_host *ha, struct srb *srb)
 367 {
 368         struct scsi_cmnd *cmd = srb->cmd;
 369
 370         if (srb->flags & SRB_DMA_VALID) {
 371                 if (cmd->use_sg) {
 372                         pci_unmap_sg(ha->pdev, cmd->request_buffer,
 373                                      cmd->use_sg, cmd->sc_data_direction);
 374                 } else if (cmd->request_bufflen) {
 375                         pci_unmap_single(ha->pdev, srb->dma_handle,
 376                                          cmd->request_bufflen,
 377                                          cmd->sc_data_direction);
 378                 }
 379                 srb->flags &= ~SRB_DMA_VALID;
 380         }
 381         cmd->SCp.ptr = NULL;
 382 }
 383
 384 void qla4xxx_srb_compl(struct scsi_qla_host *ha, struct srb *srb)
 385 {
 386         struct scsi_cmnd *cmd = srb->cmd;
 387
 388         qla4xxx_srb_free_dma(ha, srb);
 389
 390         mempool_free(srb, ha->srb_mempool);
 391
 392         cmd->scsi_done(cmd);
 393 }
 394
 395 /**
 396  * qla4xxx_queuecommand - scsi layer issues scsi command to driver.
 397  * @cmd: Pointer to Linux's SCSI command structure
 398  * @done_fn: Function that the driver calls to notify the SCSI mid-layer
 399  *      that the command has been processed.
 400  *
 401  * Remarks:
 402  * This routine is invoked by Linux to send a SCSI command to the driver.
 403  * The mid-level driver tries to ensure that queuecommand never gets
 404  * invoked concurrently with itself or the interrupt handler (although
 405  * the interrupt handler may call this routine as part of request-
 406  * completion handling).   Unfortunely, it sometimes calls the scheduler
 407  * in interrupt context which is a big NO! NO!.
 408  **/
 409 static int qla4xxx_queuecommand(struct scsi_cmnd *cmd,
 410                                 void (*done)(struct scsi_cmnd *))
 411 {
 412         struct scsi_qla_host *ha = to_qla_host(cmd->device->host);
 413         struct ddb_entry *ddb_entry = cmd->device->hostdata;
 414         struct srb *srb;
 415         int rval;
 416
 417         if (atomic_read(&ddb_entry->state) != DDB_STATE_ONLINE) {
 418                 if (atomic_read(&ddb_entry->state) == DDB_STATE_DEAD) {
 419                         cmd->result = DID_NO_CONNECT << 16;
 420                         goto qc_fail_command;
 421                 }
 422                 goto qc_host_busy;
 423         }
 424
 425         spin_unlock_irq(ha->host->host_lock);
 426
 427         srb = qla4xxx_get_new_srb(ha, ddb_entry, cmd, done);
 428         if (!srb)
 429                 goto qc_host_busy_lock;
 430
 431         rval = qla4xxx_send_command_to_isp(ha, srb);
 432         if (rval != QLA_SUCCESS)
 433                 goto qc_host_busy_free_sp;
 434
 435         spin_lock_irq(ha->host->host_lock);
 436         return 0;
 437
 438 qc_host_busy_free_sp:
 439         qla4xxx_srb_free_dma(ha, srb);
 440         mempool_free(srb, ha->srb_mempool);
 441
 442 qc_host_busy_lock:
 443         spin_lock_irq(ha->host->host_lock);
 444
 445 qc_host_busy:
 446         return SCSI_MLQUEUE_HOST_BUSY;
 447
 448 qc_fail_command:
 449         done(cmd);
 450
 451         return 0;
 452 }
 453
 454 /**
 455  * qla4xxx_mem_free - frees memory allocated to adapter
 456  * @ha: Pointer to host adapter structure.
 457  *
 458  * Frees memory previously allocated by qla4xxx_mem_alloc
 459  **/
 460 static void qla4xxx_mem_free(struct scsi_qla_host *ha)
 461 {
 462         if (ha->queues)
 463                 dma_free_coherent(&ha->pdev->dev, ha->queues_len, ha->queues,
 464                                   ha->queues_dma);
 465
 466         ha->queues_len = 0;
 467         ha->queues = NULL;
 468         ha->queues_dma = 0;
 469         ha->request_ring = NULL;
 470         ha->request_dma = 0;
 471         ha->response_ring = NULL;
 472         ha->response_dma = 0;
 473         ha->shadow_regs = NULL;
 474         ha->shadow_regs_dma = 0;
 475
 476         /* Free srb pool. */
 477         if (ha->srb_mempool)
 478                 mempool_destroy(ha->srb_mempool);
 479
 480         ha->srb_mempool = NULL;
 481
 482         /* release io space registers  */
 483         if (ha->reg)
 484                 iounmap(ha->reg);
 485         pci_release_regions(ha->pdev);
 486 }
 487
 488 /**
 489  * qla4xxx_mem_alloc - allocates memory for use by adapter.
 490  * @ha: Pointer to host adapter structure
 491  *
 492  * Allocates DMA memory for request and response queues. Also allocates memory
 493  * for srbs.
 494  **/
 495 static int qla4xxx_mem_alloc(struct scsi_qla_host *ha)
 496 {
 497         unsigned long align;
 498
 499         /* Allocate contiguous block of DMA memory for queues. */
 500         ha->queues_len = ((REQUEST_QUEUE_DEPTH * QUEUE_SIZE) +
 501                           (RESPONSE_QUEUE_DEPTH * QUEUE_SIZE) +
 502                           sizeof(struct shadow_regs) +
 503                           MEM_ALIGN_VALUE +
 504                           (PAGE_SIZE - 1)) & ~(PAGE_SIZE - 1);
 505         ha->queues = dma_alloc_coherent(&ha->pdev->dev, ha->queues_len,
 506                                         &ha->queues_dma, GFP_KERNEL);
 507         if (ha->queues == NULL) {
 508                 dev_warn(&ha->pdev->dev,
 509                         "Memory Allocation failed - queues.\n");
 510
 511                 goto mem_alloc_error_exit;
 512         }
 513         memset(ha->queues, 0, ha->queues_len);
 514
 515         /*
 516          * As per RISC alignment requirements -- the bus-address must be a
 517          * multiple of the request-ring size (in bytes).
 518          */
 519         align = 0;
 520         if ((unsigned long)ha->queues_dma & (MEM_ALIGN_VALUE - 1))
 521                 align = MEM_ALIGN_VALUE - ((unsigned long)ha->queues_dma &
 522                                            (MEM_ALIGN_VALUE - 1));
 523
 524         /* Update request and response queue pointers. */
 525         ha->request_dma = ha->queues_dma + align;
 526         ha->request_ring = (struct queue_entry *) (ha->queues + align);
 527         ha->response_dma = ha->queues_dma + align +
 528                 (REQUEST_QUEUE_DEPTH * QUEUE_SIZE);
 529         ha->response_ring = (struct queue_entry *) (ha->queues + align +
 530                                                     (REQUEST_QUEUE_DEPTH *
 531                                                      QUEUE_SIZE));
 532         ha->shadow_regs_dma = ha->queues_dma + align +
 533                 (REQUEST_QUEUE_DEPTH * QUEUE_SIZE) +
 534                 (RESPONSE_QUEUE_DEPTH * QUEUE_SIZE);
 535         ha->shadow_regs = (struct shadow_regs *) (ha->queues + align +
 536                                                   (REQUEST_QUEUE_DEPTH *
 537                                                    QUEUE_SIZE) +
 538                                                   (RESPONSE_QUEUE_DEPTH *
 539                                                    QUEUE_SIZE));
 540
 541         /* Allocate memory for srb pool. */
 542         ha->srb_mempool = mempool_create(SRB_MIN_REQ, mempool_alloc_slab,
 543                                          mempool_free_slab, srb_cachep);
 544         if (ha->srb_mempool == NULL) {
 545                 dev_warn(&ha->pdev->dev,
 546                         "Memory Allocation failed - SRB Pool.\n");
 547
 548                 goto mem_alloc_error_exit;
 549         }
 550
 551         return QLA_SUCCESS;
 552
 553 mem_alloc_error_exit:
 554         qla4xxx_mem_free(ha);
 555         return QLA_ERROR;
 556 }
 557
 558 /**
 559  * qla4xxx_timer - checks every second for work to do.
 560  * @ha: Pointer to host adapter structure.
 561  **/
 562 static void qla4xxx_timer(struct scsi_qla_host *ha)
 563 {
 564         struct ddb_entry *ddb_entry, *dtemp;
 565         int start_dpc = 0;
 566
 567         /* Search for relogin's to time-out and port down retry. */
 568         list_for_each_entry_safe(ddb_entry, dtemp, &ha->ddb_list, list) {
 569                 /* Count down time between sending relogins */
 570                 if (adapter_up(ha) &&
 571                     !test_bit(DF_RELOGIN, &ddb_entry->flags) &&
 572                     atomic_read(&ddb_entry->state) != DDB_STATE_ONLINE) {
 573                         if (atomic_read(&ddb_entry->retry_relogin_timer) !=
 574                             INVALID_ENTRY) {
 575                                 if (atomic_read(&ddb_entry->retry_relogin_timer)
 576                                                 == 0) {
 577                                         atomic_set(&ddb_entry->
 578                                                 retry_relogin_timer,
 579                                                 INVALID_ENTRY);
 580                                         set_bit(DPC_RELOGIN_DEVICE,
 581                                                 &ha->dpc_flags);
 582                                         set_bit(DF_RELOGIN, &ddb_entry->flags);
 583                                         DEBUG2(printk("scsi%ld: %s: index [%d]"
 584                                                       " login device\n",
 585                                                       ha->host_no, __func__,
 586                                                       ddb_entry->fw_ddb_index));
 587                                 } else
 588                                         atomic_dec(&ddb_entry->
 589                                                         retry_relogin_timer);
 590                         }
 591                 }
 592
 593                 /* Wait for relogin to timeout */
 594                 if (atomic_read(&ddb_entry->relogin_timer) &&
 595                     (atomic_dec_and_test(&ddb_entry->relogin_timer) != 0)) {
 596                         /*
 597                          * If the relogin times out and the device is
 598                          * still NOT ONLINE then try and relogin again.
 599                          */
 600                         if (atomic_read(&ddb_entry->state) !=
 601                             DDB_STATE_ONLINE &&
 602                             ddb_entry->fw_ddb_device_state ==
 603                             DDB_DS_SESSION_FAILED) {
 604                                 /* Reset retry relogin timer */
 605                                 atomic_inc(&ddb_entry->relogin_retry_count);
 606                                 DEBUG2(printk("scsi%ld: index[%d] relogin"
 607                                               " timed out-retrying"
 608                                               " relogin (%d)\n",
 609                                               ha->host_no,
 610                                               ddb_entry->fw_ddb_index,
 611                                               atomic_read(&ddb_entry->
 612                                                           relogin_retry_count))
 613                                         );
 614                                 start_dpc++;
 615                                 DEBUG(printk("scsi%ld:%d:%d: index [%d] "
 616                                              "initate relogin after"
 617                                              " %d seconds\n",
 618                                              ha->host_no, ddb_entry->bus,
 619                                              ddb_entry->target,
 620                                              ddb_entry->fw_ddb_index,
 621                                              ddb_entry->default_time2wait + 4)
 622                                         );
 623
 624                                 atomic_set(&ddb_entry->retry_relogin_timer,
 625                                            ddb_entry->default_time2wait + 4);
 626                         }
 627                 }
 628         }
 629
 630         /* Check for heartbeat interval. */
 631         if (ha->firmware_options & FWOPT_HEARTBEAT_ENABLE &&
 632             ha->heartbeat_interval != 0) {
 633                 ha->seconds_since_last_heartbeat++;
 634                 if (ha->seconds_since_last_heartbeat >
 635                     ha->heartbeat_interval + 2)
 636                         set_bit(DPC_RESET_HA, &ha->dpc_flags);
 637         }
 638
 639
 640         /* Wakeup the dpc routine for this adapter, if needed. */
 641         if ((start_dpc ||
 642              test_bit(DPC_RESET_HA, &ha->dpc_flags) ||
 643              test_bit(DPC_RETRY_RESET_HA, &ha->dpc_flags) ||
 644              test_bit(DPC_RELOGIN_DEVICE, &ha->dpc_flags) ||
 645              test_bit(DPC_RESET_HA_DESTROY_DDB_LIST, &ha->dpc_flags) ||
 646              test_bit(DPC_RESET_HA_INTR, &ha->dpc_flags) ||
 647              test_bit(DPC_GET_DHCP_IP_ADDR, &ha->dpc_flags) ||
 648              test_bit(DPC_AEN, &ha->dpc_flags)) &&
 649              ha->dpc_thread) {
 650                 DEBUG2(printk("scsi%ld: %s: scheduling dpc routine"
 651                               " - dpc flags = 0x%lx\n",
 652                               ha->host_no, __func__, ha->dpc_flags));
 653                 queue_work(ha->dpc_thread, &ha->dpc_work);
 654         }
 655
 656         /* Reschedule timer thread to call us back in one second */
 657         mod_timer(&ha->timer, jiffies + HZ);
 658
 659         DEBUG2(ha->seconds_since_last_intr++);
 660 }
 661
 662 /**
 663  * qla4xxx_cmd_wait - waits for all outstanding commands to complete
 664  * @ha: Pointer to host adapter structure.
 665  *
 666  * This routine stalls the driver until all outstanding commands are returned.
 667  * Caller must release the Hardware Lock prior to calling this routine.
 668  **/
 669 static int qla4xxx_cmd_wait(struct scsi_qla_host *ha)
 670 {
 671         uint32_t index = 0;
 672         int stat = QLA_SUCCESS;
 673         unsigned long flags;
 674         struct scsi_cmnd *cmd;
 675         int wait_cnt = WAIT_CMD_TOV;    /*
 676                                          * Initialized for 30 seconds as we
 677                                          * expect all commands to retuned
 678                                          * ASAP.
 679                                          */
 680
 681         while (wait_cnt) {
 682                 spin_lock_irqsave(&ha->hardware_lock, flags);
 683                 /* Find a command that hasn't completed. */
 684                 for (index = 0; index < ha->host->can_queue; index++) {
 685                         cmd = scsi_host_find_tag(ha->host, index);
 686                         if (cmd != NULL)
 687                                 break;
 688                 }
 689                 spin_unlock_irqrestore(&ha->hardware_lock, flags);
 690
 691                 /* If No Commands are pending, wait is complete */
 692                 if (index == ha->host->can_queue) {
 693                         break;
 694                 }
 695
 696                 /* If we timed out on waiting for commands to come back
 697                  * return ERROR.
 698                  */
 699                 wait_cnt--;
 700                 if (wait_cnt == 0)
 701                         stat = QLA_ERROR;
 702                 else {
 703                         msleep(1000);
 704                 }
 705         }                       /* End of While (wait_cnt) */
 706
 707         return stat;
 708 }
 709
 710 /**
 711  * qla4010_soft_reset - performs soft reset.
 712  * @ha: Pointer to host adapter structure.
 713  **/
 714 static int qla4010_soft_reset(struct scsi_qla_host *ha)
 715 {
 716         uint32_t max_wait_time;
 717         unsigned long flags = 0;
 718         int status = QLA_ERROR;
 719         uint32_t ctrl_status;
 720
 721         spin_lock_irqsave(&ha->hardware_lock, flags);
 722
 723         /*
 724          * If the SCSI Reset Interrupt bit is set, clear it.
 725          * Otherwise, the Soft Reset won't work.
 726          */
 727         ctrl_status = readw(&ha->reg->ctrl_status);
 728         if ((ctrl_status & CSR_SCSI_RESET_INTR) != 0)
 729                 writel(set_rmask(CSR_SCSI_RESET_INTR), &ha->reg->ctrl_status);
 730
 731         /* Issue Soft Reset */
 732         writel(set_rmask(CSR_SOFT_RESET), &ha->reg->ctrl_status);
 733         readl(&ha->reg->ctrl_status);
 734
 735         spin_unlock_irqrestore(&ha->hardware_lock, flags);
 736
 737         /* Wait until the Network Reset Intr bit is cleared */
 738         max_wait_time = RESET_INTR_TOV;
 739         do {
 740                 spin_lock_irqsave(&ha->hardware_lock, flags);
 741                 ctrl_status = readw(&ha->reg->ctrl_status);
 742                 spin_unlock_irqrestore(&ha->hardware_lock, flags);
 743
 744                 if ((ctrl_status & CSR_NET_RESET_INTR) == 0)
 745                         break;
 746
 747                 msleep(1000);
 748         } while ((--max_wait_time));
 749
 750         if ((ctrl_status & CSR_NET_RESET_INTR) != 0) {
 751                 DEBUG2(printk(KERN_WARNING
 752                               "scsi%ld: Network Reset Intr not cleared by "
 753                               "Network function, clearing it now!\n",
 754                               ha->host_no));
 755                 spin_lock_irqsave(&ha->hardware_lock, flags);
 756                 writel(set_rmask(CSR_NET_RESET_INTR), &ha->reg->ctrl_status);
 757                 readl(&ha->reg->ctrl_status);
 758                 spin_unlock_irqrestore(&ha->hardware_lock, flags);
 759         }
 760
 761         /* Wait until the firmware tells us the Soft Reset is done */
 762         max_wait_time = SOFT_RESET_TOV;
 763         do {
 764                 spin_lock_irqsave(&ha->hardware_lock, flags);
 765                 ctrl_status = readw(&ha->reg->ctrl_status);
 766                 spin_unlock_irqrestore(&ha->hardware_lock, flags);
 767
 768                 if ((ctrl_status & CSR_SOFT_RESET) == 0) {
 769                         status = QLA_SUCCESS;
 770                         break;
 771                 }
 772
 773                 msleep(1000);
 774         } while ((--max_wait_time));
 775
 776         /*
 777          * Also, make sure that the SCSI Reset Interrupt bit has been cleared
 778          * after the soft reset has taken place.
 779          */
 780         spin_lock_irqsave(&ha->hardware_lock, flags);
 781         ctrl_status = readw(&ha->reg->ctrl_status);
 782         if ((ctrl_status & CSR_SCSI_RESET_INTR) != 0) {
 783                 writel(set_rmask(CSR_SCSI_RESET_INTR), &ha->reg->ctrl_status);
 784                 readl(&ha->reg->ctrl_status);
 785         }
 786         spin_unlock_irqrestore(&ha->hardware_lock, flags);
 787
 788         /* If soft reset fails then most probably the bios on other
 789          * function is also enabled.
 790          * Since the initialization is sequential the other fn
 791          * wont be able to acknowledge the soft reset.
 792          * Issue a force soft reset to workaround this scenario.
 793          */
 794         if (max_wait_time == 0) {
 795                 /* Issue Force Soft Reset */
 796                 spin_lock_irqsave(&ha->hardware_lock, flags);
 797                 writel(set_rmask(CSR_FORCE_SOFT_RESET), &ha->reg->ctrl_status);
 798                 readl(&ha->reg->ctrl_status);
 799                 spin_unlock_irqrestore(&ha->hardware_lock, flags);
 800                 /* Wait until the firmware tells us the Soft Reset is done */
 801                 max_wait_time = SOFT_RESET_TOV;
 802                 do {
 803                         spin_lock_irqsave(&ha->hardware_lock, flags);
 804                         ctrl_status = readw(&ha->reg->ctrl_status);
 805                         spin_unlock_irqrestore(&ha->hardware_lock, flags);
 806
 807                         if ((ctrl_status & CSR_FORCE_SOFT_RESET) == 0) {
 808                                 status = QLA_SUCCESS;
 809                                 break;
 810                         }
 811
 812                         msleep(1000);
 813                 } while ((--max_wait_time));
 814         }
 815
 816         return status;
 817 }
 818
 819 /**
 820  * qla4xxx_topcat_reset - performs hard reset of TopCat Chip.
 821  * @ha: Pointer to host adapter structure.
 822  **/
 823 static int qla4xxx_topcat_reset(struct scsi_qla_host *ha)
 824 {
 825         unsigned long flags;
 826
 827         ql4xxx_lock_nvram(ha);
 828         spin_lock_irqsave(&ha->hardware_lock, flags);
 829         writel(set_rmask(GPOR_TOPCAT_RESET), isp_gp_out(ha));
 830         readl(isp_gp_out(ha));
 831         mdelay(1);
 832
 833         writel(clr_rmask(GPOR_TOPCAT_RESET), isp_gp_out(ha));
 834         readl(isp_gp_out(ha));
 835         spin_unlock_irqrestore(&ha->hardware_lock, flags);
 836         mdelay(2523);
 837
 838         ql4xxx_unlock_nvram(ha);
 839         return QLA_SUCCESS;
 840 }
 841
 842 /**
 843  * qla4xxx_flush_active_srbs - returns all outstanding i/o requests to O.S.
 844  * @ha: Pointer to host adapter structure.
 845  *
 846  * This routine is called just prior to a HARD RESET to return all
 847  * outstanding commands back to the Operating System.
 848  * Caller should make sure that the following locks are released
 849  * before this calling routine: Hardware lock, and io_request_lock.
 850  **/
 851 static void qla4xxx_flush_active_srbs(struct scsi_qla_host *ha)
 852 {
 853         struct srb *srb;
 854         int i;
 855         unsigned long flags;
 856
 857         spin_lock_irqsave(&ha->hardware_lock, flags);
 858         for (i = 0; i < ha->host->can_queue; i++) {
 859                 srb = qla4xxx_del_from_active_array(ha, i);
 860                 if (srb != NULL) {
 861                         srb->cmd->result = DID_RESET << 16;
 862                         qla4xxx_srb_compl(ha, srb);
 863                 }
 864         }
 865         spin_unlock_irqrestore(&ha->hardware_lock, flags);
 866
 867 }
 868
 869 /**
 870  * qla4xxx_hard_reset - performs HBA Hard Reset
 871  * @ha: Pointer to host adapter structure.
 872  **/
 873 static int qla4xxx_hard_reset(struct scsi_qla_host *ha)
 874 {
 875         /* The QLA4010 really doesn't have an equivalent to a hard reset */
 876         qla4xxx_flush_active_srbs(ha);
 877         if (test_bit(AF_TOPCAT_CHIP_PRESENT, &ha->flags)) {
 878                 int status = QLA_ERROR;
 879
 880                 if ((qla4010_soft_reset(ha) == QLA_SUCCESS) &&
 881                     (qla4xxx_topcat_reset(ha) == QLA_SUCCESS) &&
 882                     (qla4010_soft_reset(ha) == QLA_SUCCESS))
 883                         status = QLA_SUCCESS;
 884                 return status;
 885         } else
 886                 return qla4010_soft_reset(ha);
 887 }
 888
 889 /**
 890  * qla4xxx_recover_adapter - recovers adapter after a fatal error
 891  * @ha: Pointer to host adapter structure.
 892  * @renew_ddb_list: Indicates what to do with the adapter's ddb list
 893  *      after adapter recovery has completed.
 894  *      0=preserve ddb list, 1=destroy and rebuild ddb list
 895  **/
 896 static int qla4xxx_recover_adapter(struct scsi_qla_host *ha,
 897                                 uint8_t renew_ddb_list)
 898 {
 899         int status;
 900
 901         /* Stall incoming I/O until we are done */
 902         clear_bit(AF_ONLINE, &ha->flags);
 903         DEBUG2(printk("scsi%ld: %s calling qla4xxx_cmd_wait\n", ha->host_no,
 904                       __func__));
 905
 906         /* Wait for outstanding commands to complete.
 907          * Stalls the driver for max 30 secs
 908          */
 909         status = qla4xxx_cmd_wait(ha);
 910
 911         qla4xxx_disable_intrs(ha);
 912
 913         /* Flush any pending ddb changed AENs */
 914         qla4xxx_process_aen(ha, FLUSH_DDB_CHANGED_AENS);
 915
 916         /* Reset the firmware.  If successful, function
 917          * returns with ISP interrupts enabled.
 918          */
 919         if (status == QLA_SUCCESS) {
 920                 DEBUG2(printk("scsi%ld: %s - Performing soft reset..\n",
 921                               ha->host_no, __func__));
 922                 qla4xxx_flush_active_srbs(ha);
 923                 if (ql4xxx_lock_drvr_wait(ha) == QLA_SUCCESS)
 924                         status = qla4xxx_soft_reset(ha);
 925                 else
 926                         status = QLA_ERROR;
 927         }
 928
 929         /* Flush any pending ddb changed AENs */
 930         qla4xxx_process_aen(ha, FLUSH_DDB_CHANGED_AENS);
 931
 932         /* Re-initialize firmware. If successful, function returns
 933          * with ISP interrupts enabled */
 934         if (status == QLA_SUCCESS) {
 935                 DEBUG2(printk("scsi%ld: %s - Initializing adapter..\n",
 936                               ha->host_no, __func__));
 937
 938                 /* If successful, AF_ONLINE flag set in
 939                  * qla4xxx_initialize_adapter */
 940                 status = qla4xxx_initialize_adapter(ha, renew_ddb_list);
 941         }
 942
 943         /* Failed adapter initialization?
 944          * Retry reset_ha only if invoked via DPC (DPC_RESET_HA) */
 945         if ((test_bit(AF_ONLINE, &ha->flags) == 0) &&
 946             (test_bit(DPC_RESET_HA, &ha->dpc_flags))) {
 947                 /* Adapter initialization failed, see if we can retry
 948                  * resetting the ha */
 949                 if (!test_bit(DPC_RETRY_RESET_HA, &ha->dpc_flags)) {
 950                         ha->retry_reset_ha_cnt = MAX_RESET_HA_RETRIES;
 951                         DEBUG2(printk("scsi%ld: recover adapter - retrying "
 952                                       "(%d) more times\n", ha->host_no,
 953                                       ha->retry_reset_ha_cnt));
 954                         set_bit(DPC_RETRY_RESET_HA, &ha->dpc_flags);
 955                         status = QLA_ERROR;
 956                 } else {
 957                         if (ha->retry_reset_ha_cnt > 0) {
 958                                 /* Schedule another Reset HA--DPC will retry */
 959                                 ha->retry_reset_ha_cnt--;
 960                                 DEBUG2(printk("scsi%ld: recover adapter - "
 961                                               "retry remaining %d\n",
 962                                               ha->host_no,
 963                                               ha->retry_reset_ha_cnt));
 964                                 status = QLA_ERROR;
 965                         }
 966
 967                         if (ha->retry_reset_ha_cnt == 0) {
 968                                 /* Recover adapter retries have been exhausted.
 969                                  * Adapter DEAD */
 970                                 DEBUG2(printk("scsi%ld: recover adapter "
 971                                               "failed - board disabled\n",
 972                                               ha->host_no));
 973                                 qla4xxx_flush_active_srbs(ha);
 974                                 clear_bit(DPC_RETRY_RESET_HA, &ha->dpc_flags);
 975                                 clear_bit(DPC_RESET_HA, &ha->dpc_flags);
 976                                 clear_bit(DPC_RESET_HA_DESTROY_DDB_LIST,
 977                                           &ha->dpc_flags);
 978                                 status = QLA_ERROR;
 979                         }
 980                 }
 981         } else {
 982                 clear_bit(DPC_RESET_HA, &ha->dpc_flags);
 983                 clear_bit(DPC_RESET_HA_DESTROY_DDB_LIST, &ha->dpc_flags);
 984                 clear_bit(DPC_RETRY_RESET_HA, &ha->dpc_flags);
 985         }
 986
 987         ha->adapter_error_count++;
 988
 989         if (status == QLA_SUCCESS)
 990                 qla4xxx_enable_intrs(ha);
 991
 992         DEBUG2(printk("scsi%ld: recover adapter .. DONE\n", ha->host_no));
 993         return status;
 994 }
 995
 996 /**
 997  * qla4xxx_do_dpc - dpc routine
 998  * @data: in our case pointer to adapter structure
 999  *
1000  * This routine is a task that is schedule by the interrupt handler
1001  * to perform the background processing for interrupts.  We put it
1002  * on a task queue that is consumed whenever the scheduler runs; that's
1003  * so you can do anything (i.e. put the process to sleep etc).  In fact,
1004  * the mid-level tries to sleep when it reaches the driver threshold
1005  * "host->can_queue". This can cause a panic if we were in our interrupt code.
1006  **/
1007 static void qla4xxx_do_dpc(void *data)
1008 {
1009         struct scsi_qla_host *ha = (struct scsi_qla_host *) data;
1010         struct ddb_entry *ddb_entry, *dtemp;
1011
1012         DEBUG2(printk("scsi%ld: %s: DPC handler waking up."
1013                 "flags = 0x%08lx, dpc_flags = 0x%08lx\n",
1014                 ha->host_no, __func__, ha->flags, ha->dpc_flags));
1015
1016         /* Initialization not yet finished. Don't do anything yet. */
1017         if (!test_bit(AF_INIT_DONE, &ha->flags))
1018                 return;
1019
1020         if (adapter_up(ha) ||
1021             test_bit(DPC_RESET_HA, &ha->dpc_flags) ||
1022             test_bit(DPC_RESET_HA_INTR, &ha->dpc_flags) ||
1023             test_bit(DPC_RESET_HA_DESTROY_DDB_LIST, &ha->dpc_flags)) {
1024                 if (test_bit(DPC_RESET_HA_DESTROY_DDB_LIST, &ha->dpc_flags) ||
1025                         test_bit(DPC_RESET_HA, &ha->dpc_flags))
1026                         qla4xxx_recover_adapter(ha, PRESERVE_DDB_LIST);
1027
1028                 if (test_and_clear_bit(DPC_RESET_HA_INTR, &ha->dpc_flags)) {
1029                         uint8_t wait_time = RESET_INTR_TOV;
1030                         unsigned long flags = 0;
1031
1032                         qla4xxx_flush_active_srbs(ha);
1033
1034                         spin_lock_irqsave(&ha->hardware_lock, flags);
1035                         while ((readw(&ha->reg->ctrl_status) &
1036                                 (CSR_SOFT_RESET | CSR_FORCE_SOFT_RESET)) != 0) {
1037                                 if (--wait_time == 0)
1038                                         break;
1039
1040                                 spin_unlock_irqrestore(&ha->hardware_lock,
1041                                                        flags);
1042
1043                                 msleep(1000);
1044
1045                                 spin_lock_irqsave(&ha->hardware_lock, flags);
1046                         }
1047                         spin_unlock_irqrestore(&ha->hardware_lock, flags);
1048
1049                         if (wait_time == 0)
1050                                 DEBUG2(printk("scsi%ld: %s: SR|FSR "
1051                                               "bit not cleared-- resetting\n",
1052                                               ha->host_no, __func__));
1053                 }
1054         }
1055
1056         /* ---- process AEN? --- */
1057         if (test_and_clear_bit(DPC_AEN, &ha->dpc_flags))
1058                 qla4xxx_process_aen(ha, PROCESS_ALL_AENS);
1059
1060         /* ---- Get DHCP IP Address? --- */
1061         if (test_and_clear_bit(DPC_GET_DHCP_IP_ADDR, &ha->dpc_flags))
1062                 qla4xxx_get_dhcp_ip_address(ha);
1063
1064         /* ---- relogin device? --- */
1065         if (adapter_up(ha) &&
1066             test_and_clear_bit(DPC_RELOGIN_DEVICE, &ha->dpc_flags)) {
1067                 list_for_each_entry_safe(ddb_entry, dtemp,
1068                                          &ha->ddb_list, list) {
1069                         if (test_and_clear_bit(DF_RELOGIN, &ddb_entry->flags) &&
1070                             atomic_read(&ddb_entry->state) != DDB_STATE_ONLINE)
1071                                 qla4xxx_relogin_device(ha, ddb_entry);
1072
1073                         /*
1074                          * If mbx cmd times out there is no point
1075                          * in continuing further.
1076                          * With large no of targets this can hang
1077                          * the system.
1078                          */
1079                         if (test_bit(DPC_RESET_HA, &ha->dpc_flags)) {
1080                                 printk(KERN_WARNING "scsi%ld: %s: "
1081                                        "need to reset hba\n",
1082                                        ha->host_no, __func__);
1083                                 break;
1084                         }
1085                 }
1086         }
1087 }
1088
1089 /**
1090  * qla4xxx_free_adapter - release the adapter
1091  * @ha: pointer to adapter structure
1092  **/
1093 static void qla4xxx_free_adapter(struct scsi_qla_host *ha)
1094 {
1095
1096         if (test_bit(AF_INTERRUPTS_ON, &ha->flags)) {
1097                 /* Turn-off interrupts on the card. */
1098                 qla4xxx_disable_intrs(ha);
1099         }
1100
1101         /* Kill the kernel thread for this host */
1102         if (ha->dpc_thread)
1103                 destroy_workqueue(ha->dpc_thread);
1104
1105         /* Issue Soft Reset to put firmware in unknown state */
1106         if (ql4xxx_lock_drvr_wait(ha) == QLA_SUCCESS)
1107                 qla4xxx_soft_reset(ha);
1108
1109         /* Remove timer thread, if present */
1110         if (ha->timer_active)
1111                 qla4xxx_stop_timer(ha);
1112
1113         /* free extra memory */
1114         qla4xxx_mem_free(ha);
1115
1116         /* Detach interrupts */
1117         if (test_and_clear_bit(AF_IRQ_ATTACHED, &ha->flags))
1118                 free_irq(ha->pdev->irq, ha);
1119
1120         pci_disable_device(ha->pdev);
1121
1122 }
1123
1124 /***
1125  * qla4xxx_iospace_config - maps registers
1126  * @ha: pointer to adapter structure
1127  *
1128  * This routines maps HBA's registers from the pci address space
1129  * into the kernel virtual address space for memory mapped i/o.
1130  **/
1131 static int qla4xxx_iospace_config(struct scsi_qla_host *ha)
1132 {
1133         unsigned long pio, pio_len, pio_flags;
1134         unsigned long mmio, mmio_len, mmio_flags;
1135
1136         pio = pci_resource_start(ha->pdev, 0);
1137         pio_len = pci_resource_len(ha->pdev, 0);
1138         pio_flags = pci_resource_flags(ha->pdev, 0);
1139         if (pio_flags & IORESOURCE_IO) {
1140                 if (pio_len < MIN_IOBASE_LEN) {
1141                         dev_warn(&ha->pdev->dev,
1142                                 "Invalid PCI I/O region size\n");
1143                         pio = 0;
1144                 }
1145         } else {
1146                 dev_warn(&ha->pdev->dev, "region #0 not a PIO resource\n");
1147                 pio = 0;
1148         }
1149
1150         /* Use MMIO operations for all accesses. */
1151         mmio = pci_resource_start(ha->pdev, 1);
1152         mmio_len = pci_resource_len(ha->pdev, 1);
1153         mmio_flags = pci_resource_flags(ha->pdev, 1);
1154
1155         if (!(mmio_flags & IORESOURCE_MEM)) {
1156                 dev_err(&ha->pdev->dev,
1157                         "region #0 not an MMIO resource, aborting\n");
1158
1159                 goto iospace_error_exit;
1160         }
1161         if (mmio_len < MIN_IOBASE_LEN) {
1162                 dev_err(&ha->pdev->dev,
1163                         "Invalid PCI mem region size, aborting\n");
1164                 goto iospace_error_exit;
1165         }
1166
1167         if (pci_request_regions(ha->pdev, DRIVER_NAME)) {
1168                 dev_warn(&ha->pdev->dev,
1169                         "Failed to reserve PIO/MMIO regions\n");
1170
1171                 goto iospace_error_exit;
1172         }
1173
1174         ha->pio_address = pio;
1175         ha->pio_length = pio_len;
1176         ha->reg = ioremap(mmio, MIN_IOBASE_LEN);
1177         if (!ha->reg) {
1178                 dev_err(&ha->pdev->dev,
1179                         "cannot remap MMIO, aborting\n");
1180
1181                 goto iospace_error_exit;
1182         }
1183
1184         return 0;
1185
1186 iospace_error_exit:
1187         return -ENOMEM;
1188 }
1189
1190 /**
1191  * qla4xxx_probe_adapter - callback function to probe HBA
1192  * @pdev: pointer to pci_dev structure
1193  * @pci_device_id: pointer to pci_device entry
1194  *
1195  * This routine will probe for Qlogic 4xxx iSCSI host adapters.
1196  * It returns zero if successful. It also initializes all data necessary for
1197  * the driver.
1198  **/
1199 static int __devinit qla4xxx_probe_adapter(struct pci_dev *pdev,
1200                                            const struct pci_device_id *ent)
1201 {
1202         int ret = -ENODEV, status;
1203         struct Scsi_Host *host;
1204         struct scsi_qla_host *ha;
1205         struct ddb_entry *ddb_entry, *ddbtemp;
1206         uint8_t init_retry_count = 0;
1207         char buf[34];
1208
1209         if (pci_enable_device(pdev))
1210                 return -1;
1211
1212         host = scsi_host_alloc(&qla4xxx_driver_template, sizeof(*ha));
1213         if (host == NULL) {
1214                 printk(KERN_WARNING
1215                        "qla4xxx: Couldn't allocate host from scsi layer!\n");
1216                 goto probe_disable_device;
1217         }
1218
1219         /* Clear our data area */
1220         ha = (struct scsi_qla_host *) host->hostdata;
1221         memset(ha, 0, sizeof(*ha));
1222
1223         /* Save the information from PCI BIOS.  */
1224         ha->pdev = pdev;
1225         ha->host = host;
1226         ha->host_no = host->host_no;
1227
1228         /* Configure PCI I/O space. */
1229         ret = qla4xxx_iospace_config(ha);
1230         if (ret)
1231                 goto probe_failed;
1232
1233         dev_info(&ha->pdev->dev, "Found an ISP%04x, irq %d, iobase 0x%p\n",
1234                    pdev->device, pdev->irq, ha->reg);
1235
1236         qla4xxx_config_dma_addressing(ha);
1237
1238         /* Initialize lists and spinlocks. */
1239         INIT_LIST_HEAD(&ha->ddb_list);
1240         INIT_LIST_HEAD(&ha->free_srb_q);
1241
1242         mutex_init(&ha->mbox_sem);
1243         init_waitqueue_head(&ha->mailbox_wait_queue);
1244
1245         spin_lock_init(&ha->hardware_lock);
1246         spin_lock_init(&ha->list_lock);
1247
1248         /* Allocate dma buffers */
1249         if (qla4xxx_mem_alloc(ha)) {
1250                 dev_warn(&ha->pdev->dev,
1251                            "[ERROR] Failed to allocate memory for adapter\n");
1252
1253                 ret = -ENOMEM;
1254                 goto probe_failed;
1255         }
1256
1257         /*
1258          * Initialize the Host adapter request/response queues and
1259          * firmware
1260          * NOTE: interrupts enabled upon successful completion
1261          */
1262         status = qla4xxx_initialize_adapter(ha, REBUILD_DDB_LIST);
1263         while (status == QLA_ERROR && init_retry_count++ < MAX_INIT_RETRIES) {
1264                 DEBUG2(printk("scsi: %s: retrying adapter initialization "
1265                               "(%d)\n", __func__, init_retry_count));
1266                 qla4xxx_soft_reset(ha);
1267                 status = qla4xxx_initialize_adapter(ha, REBUILD_DDB_LIST);
1268         }
1269         if (status == QLA_ERROR) {
1270                 dev_warn(&ha->pdev->dev, "Failed to initialize adapter\n");
1271
1272                 ret = -ENODEV;
1273                 goto probe_failed;
1274         }
1275
1276         host->cmd_per_lun = 3;
1277         host->max_channel = 0;
1278         host->max_lun = MAX_LUNS - 1;
1279         host->max_id = MAX_TARGETS;
1280         host->max_cmd_len = IOCB_MAX_CDB_LEN;
1281         host->can_queue = MAX_SRBS ;
1282         host->transportt = qla4xxx_scsi_transport;
1283
1284         ret = scsi_init_shared_tag_map(host, MAX_SRBS);
1285         if (ret) {
1286                 dev_warn(&ha->pdev->dev, "scsi_init_shared_tag_map failed");
1287                 goto probe_failed;
1288         }
1289
1290         /* Startup the kernel thread for this host adapter. */
1291         DEBUG2(printk("scsi: %s: Starting kernel thread for "
1292                       "qla4xxx_dpc\n", __func__));
1293         sprintf(buf, "qla4xxx_%lu_dpc", ha->host_no);
1294         ha->dpc_thread = create_singlethread_workqueue(buf);
1295         if (!ha->dpc_thread) {
1296                 dev_warn(&ha->pdev->dev, "Unable to start DPC thread!\n");
1297                 ret = -ENODEV;
1298                 goto probe_failed;
1299         }
1300         INIT_WORK(&ha->dpc_work, qla4xxx_do_dpc, ha);
1301
1302         ret = request_irq(pdev->irq, qla4xxx_intr_handler,
1303                           SA_INTERRUPT|SA_SHIRQ, "qla4xxx", ha);
1304         if (ret) {
1305                 dev_warn(&ha->pdev->dev, "Failed to reserve interrupt %d"
1306                         " already in use.\n", pdev->irq);
1307                 goto probe_failed;
1308         }
1309         set_bit(AF_IRQ_ATTACHED, &ha->flags);
1310         host->irq = pdev->irq;
1311         DEBUG(printk("scsi%d: irq %d attached\n", ha->host_no, ha->pdev->irq));
1312
1313         qla4xxx_enable_intrs(ha);
1314
1315         /* Start timer thread. */
1316         qla4xxx_start_timer(ha, qla4xxx_timer, 1);
1317
1318         set_bit(AF_INIT_DONE, &ha->flags);
1319
1320         pci_set_drvdata(pdev, ha);
1321
1322         ret = scsi_add_host(host, &pdev->dev);
1323         if (ret)
1324                 goto probe_failed;
1325
1326         /* Update transport device information for all devices. */
1327         list_for_each_entry_safe(ddb_entry, ddbtemp, &ha->ddb_list, list) {
1328                 if (ddb_entry->fw_ddb_device_state == DDB_DS_SESSION_ACTIVE)
1329                         if (qla4xxx_add_sess(ddb_entry))
1330                                 goto remove_host;
1331         }
1332
1333         printk(KERN_INFO
1334                " QLogic iSCSI HBA Driver version: %s\n"
1335                "  QLogic ISP%04x @ %s, host#=%ld, fw=%02d.%02d.%02d.%02d\n",
1336                qla4xxx_version_str, ha->pdev->device, pci_name(ha->pdev),
1337                ha->host_no, ha->firmware_version[0], ha->firmware_version[1],
1338                ha->patch_number, ha->build_number);
1339
1340         return 0;
1341
1342 remove_host:
1343         qla4xxx_free_ddb_list(ha);
1344         scsi_remove_host(host);
1345
1346 probe_failed:
1347         qla4xxx_free_adapter(ha);
1348         scsi_host_put(ha->host);
1349
1350 probe_disable_device:
1351         pci_disable_device(pdev);
1352
1353         return ret;
1354 }
1355
1356 /**
1357  * qla4xxx_remove_adapter - calback function to remove adapter.
1358  * @pci_dev: PCI device pointer
1359  **/
1360 static void __devexit qla4xxx_remove_adapter(struct pci_dev *pdev)
1361 {
1362         struct scsi_qla_host *ha;
1363
1364         ha = pci_get_drvdata(pdev);
1365
1366         /* remove devs from iscsi_sessions to scsi_devices */
1367         qla4xxx_free_ddb_list(ha);
1368
1369         scsi_remove_host(ha->host);
1370
1371         qla4xxx_free_adapter(ha);
1372
1373         scsi_host_put(ha->host);
1374
1375         pci_set_drvdata(pdev, NULL);
1376 }
1377
1378 /**
1379  * qla4xxx_config_dma_addressing() - Configure OS DMA addressing method.
1380  * @ha: HA context
1381  *
1382  * At exit, the @ha's flags.enable_64bit_addressing set to indicated
1383  * supported addressing method.
1384  */
1385 void qla4xxx_config_dma_addressing(struct scsi_qla_host *ha)
1386 {
1387         int retval;
1388
1389         /* Update our PCI device dma_mask for full 64 bit mask */
1390         if (pci_set_dma_mask(ha->pdev, DMA_64BIT_MASK) == 0) {
1391                 if (pci_set_consistent_dma_mask(ha->pdev, DMA_64BIT_MASK)) {
1392                         dev_dbg(&ha->pdev->dev,
1393                                   "Failed to set 64 bit PCI consistent mask; "
1394                                    "using 32 bit.\n");
1395                         retval = pci_set_consistent_dma_mask(ha->pdev,
1396                                                              DMA_32BIT_MASK);
1397                 }
1398         } else
1399                 retval = pci_set_dma_mask(ha->pdev, DMA_32BIT_MASK);
1400 }
1401
1402 static int qla4xxx_slave_alloc(struct scsi_device *sdev)
1403 {
1404         struct iscsi_cls_session *sess = starget_to_session(sdev->sdev_target);
1405         struct ddb_entry *ddb = sess->dd_data;
1406
1407         sdev->hostdata = ddb;
1408         sdev->tagged_supported = 1;
1409         scsi_activate_tcq(sdev, sdev->host->can_queue);
1410         return 0;
1411 }
1412
1413 static int qla4xxx_slave_configure(struct scsi_device *sdev)
1414 {
1415         sdev->tagged_supported = 1;
1416         return 0;
1417 }
1418
1419 static void qla4xxx_slave_destroy(struct scsi_device *sdev)
1420 {
1421         scsi_deactivate_tcq(sdev, 1);
1422 }
1423
1424 /**
1425  * qla4xxx_del_from_active_array - returns an active srb
1426  * @ha: Pointer to host adapter structure.
1427  * @index: index into to the active_array
1428  *
1429  * This routine removes and returns the srb at the specified index
1430  **/
1431 struct srb * qla4xxx_del_from_active_array(struct scsi_qla_host *ha, uint32_t index)
1432 {
1433         struct srb *srb = NULL;
1434         struct scsi_cmnd *cmd;
1435
1436         if (!(cmd = scsi_host_find_tag(ha->host, index)))
1437                 return srb;
1438
1439         if (!(srb = (struct srb *)cmd->host_scribble))
1440                 return srb;
1441
1442         /* update counters */
1443         if (srb->flags & SRB_DMA_VALID) {
1444                 ha->req_q_count += srb->iocb_cnt;
1445                 ha->iocb_cnt -= srb->iocb_cnt;
1446                 if (srb->cmd)
1447                         srb->cmd->host_scribble = NULL;
1448         }
1449         return srb;
1450 }
1451
1452 /**
1453  * qla4xxx_soft_reset - performs a SOFT RESET of hba.
1454  * @ha: Pointer to host adapter structure.
1455  **/
1456 int qla4xxx_soft_reset(struct scsi_qla_host *ha)
1457 {
1458
1459         DEBUG2(printk(KERN_WARNING "scsi%ld: %s: chip reset!\n", ha->host_no,
1460                       __func__));
1461         if (test_bit(AF_TOPCAT_CHIP_PRESENT, &ha->flags)) {
1462                 int status = QLA_ERROR;
1463
1464                 if ((qla4010_soft_reset(ha) == QLA_SUCCESS) &&
1465                     (qla4xxx_topcat_reset(ha) == QLA_SUCCESS) &&
1466                     (qla4010_soft_reset(ha) == QLA_SUCCESS) )
1467                         status = QLA_SUCCESS;
1468                 return status;
1469         } else
1470                 return qla4010_soft_reset(ha);
1471 }
1472
1473 /**
1474  * qla4xxx_eh_wait_on_command - waits for command to be returned by firmware
1475  * @ha: actual ha whose done queue will contain the comd returned by firmware.
1476  * @cmd: Scsi Command to wait on.
1477  *
1478  * This routine waits for the command to be returned by the Firmware
1479  * for some max time.
1480  **/
1481 static int qla4xxx_eh_wait_on_command(struct scsi_qla_host *ha,
1482                                       struct scsi_cmnd *cmd)
1483 {
1484         int done = 0;
1485         struct srb *rp;
1486         uint32_t max_wait_time = EH_WAIT_CMD_TOV;
1487
1488         do {
1489                 /* Checking to see if its returned to OS */
1490                 rp = (struct srb *) cmd->SCp.ptr;
1491                 if (rp == NULL) {
1492                         done++;
1493                         break;
1494                 }
1495
1496                 msleep(2000);
1497         } while (max_wait_time--);
1498
1499         return done;
1500 }
1501
1502 /**
1503  * qla4xxx_wait_for_hba_online - waits for HBA to come online
1504  * @ha: Pointer to host adapter structure
1505  **/
1506 static int qla4xxx_wait_for_hba_online(struct scsi_qla_host *ha)
1507 {
1508         unsigned long wait_online;
1509
1510         wait_online = jiffies + (30 * HZ);
1511         while (time_before(jiffies, wait_online)) {
1512
1513                 if (adapter_up(ha))
1514                         return QLA_SUCCESS;
1515                 else if (ha->retry_reset_ha_cnt == 0)
1516                         return QLA_ERROR;
1517
1518                 msleep(2000);
1519         }
1520
1521         return QLA_ERROR;
1522 }
1523
1524 /**
1525  * qla4xxx_eh_wait_for_active_target_commands - wait for active cmds to finish.
1526  * @ha: pointer to to HBA
1527  * @t: target id
1528  * @l: lun id
1529  *
1530  * This function waits for all outstanding commands to a lun to complete. It
1531  * returns 0 if all pending commands are returned and 1 otherwise.
1532  **/
1533 static int qla4xxx_eh_wait_for_active_target_commands(struct scsi_qla_host *ha,
1534                                                  int t, int l)
1535 {
1536         int cnt;
1537         int status = 0;
1538         struct scsi_cmnd *cmd;
1539
1540         /*
1541          * Waiting for all commands for the designated target in the active
1542          * array
1543          */
1544         for (cnt = 0; cnt < ha->host->can_queue; cnt++) {
1545                 cmd = scsi_host_find_tag(ha->host, cnt);
1546                 if (cmd && cmd->device->id == t && cmd->device->lun == l) {
1547                         if (!qla4xxx_eh_wait_on_command(ha, cmd)) {
1548                                 status++;
1549                                 break;
1550                         }
1551                 }
1552         }
1553         return status;
1554 }
1555
1556 /**
1557  * qla4xxx_eh_device_reset - callback for target reset.
1558  * @cmd: Pointer to Linux's SCSI command structure
1559  *
1560  * This routine is called by the Linux OS to reset all luns on the
1561  * specified target.
1562  **/
1563 static int qla4xxx_eh_device_reset(struct scsi_cmnd *cmd)
1564 {
1565         struct scsi_qla_host *ha = to_qla_host(cmd->device->host);
1566         struct ddb_entry *ddb_entry = cmd->device->hostdata;
1567         struct srb *sp;
1568         int ret = FAILED, stat;
1569
1570         sp = (struct srb *) cmd->SCp.ptr;
1571         if (!sp || !ddb_entry)
1572                 return ret;
1573
1574         dev_info(&ha->pdev->dev,
1575                    "scsi%ld:%d:%d:%d: DEVICE RESET ISSUED.\n", ha->host_no,
1576                    cmd->device->channel, cmd->device->id, cmd->device->lun);
1577
1578         DEBUG2(printk(KERN_INFO
1579                       "scsi%ld: DEVICE_RESET cmd=%p jiffies = 0x%lx, to=%x,"
1580                       "dpc_flags=%lx, status=%x allowed=%d\n", ha->host_no,
1581                       cmd, jiffies, cmd->timeout_per_command / HZ,
1582                       ha->dpc_flags, cmd->result, cmd->allowed));
1583
1584         /* FIXME: wait for hba to go online */
1585         stat = qla4xxx_reset_lun(ha, ddb_entry, cmd->device->lun);
1586         if (stat != QLA_SUCCESS) {
1587                 dev_info(&ha->pdev->dev, "DEVICE RESET FAILED. %d\n", stat);
1588                 goto eh_dev_reset_done;
1589         }
1590
1591         /* Send marker. */
1592         ha->marker_needed = 1;
1593
1594         /*
1595          * If we are coming down the EH path, wait for all commands to complete
1596          * for the device.
1597          */
1598         if (cmd->device->host->shost_state == SHOST_RECOVERY) {
1599                 if (qla4xxx_eh_wait_for_active_target_commands(ha,
1600                                                           cmd->device->id,
1601                                                           cmd->device->lun)){
1602                         dev_info(&ha->pdev->dev,
1603                                    "DEVICE RESET FAILED - waiting for "
1604                                    "commands.\n");
1605                         goto eh_dev_reset_done;
1606                 }
1607         }
1608
1609         dev_info(&ha->pdev->dev,
1610                    "scsi(%ld:%d:%d:%d): DEVICE RESET SUCCEEDED.\n",
1611                    ha->host_no, cmd->device->channel, cmd->device->id,
1612                    cmd->device->lun);
1613
1614         ret = SUCCESS;
1615
1616 eh_dev_reset_done:
1617
1618         return ret;
1619 }
1620
1621 /**
1622  * qla4xxx_eh_host_reset - kernel callback
1623  * @cmd: Pointer to Linux's SCSI command structure
1624  *
1625  * This routine is invoked by the Linux kernel to perform fatal error
1626  * recovery on the specified adapter.
1627  **/
1628 static int qla4xxx_eh_host_reset(struct scsi_cmnd *cmd)
1629 {
1630         int return_status = FAILED;
1631         struct scsi_qla_host *ha;
1632
1633         ha = (struct scsi_qla_host *) cmd->device->host->hostdata;
1634
1635         dev_info(&ha->pdev->dev,
1636                    "scsi(%ld:%d:%d:%d): ADAPTER RESET ISSUED.\n", ha->host_no,
1637                    cmd->device->channel, cmd->device->id, cmd->device->lun);
1638
1639         if (qla4xxx_wait_for_hba_online(ha) != QLA_SUCCESS) {
1640                 DEBUG2(printk("scsi%ld:%d: %s: Unable to reset host.  Adapter "
1641                               "DEAD.\n", ha->host_no, cmd->device->channel,
1642                               __func__));
1643
1644                 return FAILED;
1645         }
1646
1647         if (qla4xxx_recover_adapter(ha, PRESERVE_DDB_LIST) == QLA_SUCCESS) {
1648                 return_status = SUCCESS;
1649         }
1650
1651         dev_info(&ha->pdev->dev, "HOST RESET %s.\n",
1652                    return_status == FAILED ? "FAILED" : "SUCCEDED");
1653
1654         return return_status;
1655 }
1656
1657
1658 static struct pci_device_id qla4xxx_pci_tbl[] = {
1659         {
1660                 .vendor         = PCI_VENDOR_ID_QLOGIC,
1661                 .device         = PCI_DEVICE_ID_QLOGIC_ISP4010,
1662                 .subvendor      = PCI_ANY_ID,
1663                 .subdevice      = PCI_ANY_ID,
1664         },
1665         {
1666                 .vendor         = PCI_VENDOR_ID_QLOGIC,
1667                 .device         = PCI_DEVICE_ID_QLOGIC_ISP4022,
1668                 .subvendor      = PCI_ANY_ID,
1669                 .subdevice      = PCI_ANY_ID,
1670         },
1671         {0, 0},
1672 };
1673 MODULE_DEVICE_TABLE(pci, qla4xxx_pci_tbl);
1674
1675 struct pci_driver qla4xxx_pci_driver = {
1676         .name           = DRIVER_NAME,
1677         .id_table       = qla4xxx_pci_tbl,
1678         .probe          = qla4xxx_probe_adapter,
1679         .remove         = qla4xxx_remove_adapter,
1680 };
1681
1682 static int __init qla4xxx_module_init(void)
1683 {
1684         int ret;
1685
1686         /* Allocate cache for SRBs. */
1687         srb_cachep = kmem_cache_create("qla4xxx_srbs", sizeof(struct srb), 0,
1688                                        SLAB_HWCACHE_ALIGN, NULL, NULL);
1689         if (srb_cachep == NULL) {
1690                 printk(KERN_ERR
1691                        "%s: Unable to allocate SRB cache..."
1692                        "Failing load!\n", DRIVER_NAME);
1693                 ret = -ENOMEM;
1694                 goto no_srp_cache;
1695         }
1696
1697         /* Derive version string. */
1698         strcpy(qla4xxx_version_str, QLA4XXX_DRIVER_VERSION);
1699         if (ql4xextended_error_logging)
1700                 strcat(qla4xxx_version_str, "-debug");
1701
1702         qla4xxx_scsi_transport =
1703                 iscsi_register_transport(&qla4xxx_iscsi_transport);
1704         if (!qla4xxx_scsi_transport){
1705                 ret = -ENODEV;
1706                 goto release_srb_cache;
1707         }
1708
1709         ret = pci_register_driver(&qla4xxx_pci_driver);
1710         if (ret)
1711                 goto unregister_transport;
1712
1713         printk(KERN_INFO "QLogic iSCSI HBA Driver\n");
1714         return 0;
1715
1716 unregister_transport:
1717         iscsi_unregister_transport(&qla4xxx_iscsi_transport);
1718 release_srb_cache:
1719         kmem_cache_destroy(srb_cachep);
1720 no_srp_cache:
1721         return ret;
1722 }
1723
1724 static void __exit qla4xxx_module_exit(void)
1725 {
1726         pci_unregister_driver(&qla4xxx_pci_driver);
1727         iscsi_unregister_transport(&qla4xxx_iscsi_transport);
1728         kmem_cache_destroy(srb_cachep);
1729 }
1730
1731 module_init(qla4xxx_module_init);
1732 module_exit(qla4xxx_module_exit);
1733
1734 MODULE_AUTHOR("QLogic Corporation");
1735 MODULE_DESCRIPTION("QLogic iSCSI HBA Driver");
1736 MODULE_LICENSE("GPL");
1737 MODULE_VERSION(QLA4XXX_DRIVER_VERSION);