1 /********************************************************************************************************************************
2 * This file is created to process BA Action Frame. According to 802.11 spec, there are 3 BA action types at all. And as BA is
3 * related to TS, this part need some structure defined in QOS side code. Also TX RX is going to be resturctured, so how to send
4 * ADDBAREQ ADDBARSP and DELBA packet is still on consideration. Temporarily use MANAGE QUEUE instead of Normal Queue.
6 * *****************************************************************************************************************************/
8 #include "rtl819x_BA.h"
10 /********************************************************************************************************************
11 *function: Activate BA entry. And if Time is nozero, start timer.
12 * input: PBA_RECORD pBA //BA entry to be enabled
13 * u16 Time //indicate time delay.
15 ********************************************************************************************************************/
16 static void ActivateBAEntry(struct ieee80211_device *ieee, PBA_RECORD pBA, u16 Time)
20 mod_timer(&pBA->Timer, jiffies + MSECS(Time));
23 /********************************************************************************************************************
24 *function: deactivate BA entry, including its timer.
25 * input: PBA_RECORD pBA //BA entry to be disabled
27 ********************************************************************************************************************/
28 static void DeActivateBAEntry(struct ieee80211_device *ieee, PBA_RECORD pBA)
31 del_timer_sync(&pBA->Timer);
33 /********************************************************************************************************************
34 *function: deactivete BA entry in Tx Ts, and send DELBA.
36 * PTX_TS_RECORD pTxTs //Tx Ts which is to deactivate BA entry.
38 * notice: As PTX_TS_RECORD structure will be defined in QOS, so wait to be merged. //FIXME
39 ********************************************************************************************************************/
40 static u8 TxTsDeleteBA(struct ieee80211_device *ieee, PTX_TS_RECORD pTxTs)
42 PBA_RECORD pAdmittedBa = &pTxTs->TxAdmittedBARecord; //These two BA entries must exist in TS structure
43 PBA_RECORD pPendingBa = &pTxTs->TxPendingBARecord;
44 u8 bSendDELBA = false;
47 if(pPendingBa->bValid)
49 DeActivateBAEntry(ieee, pPendingBa);
54 if(pAdmittedBa->bValid)
56 DeActivateBAEntry(ieee, pAdmittedBa);
63 /********************************************************************************************************************
64 *function: deactivete BA entry in Tx Ts, and send DELBA.
66 * PRX_TS_RECORD pRxTs //Rx Ts which is to deactivate BA entry.
68 * notice: As PRX_TS_RECORD structure will be defined in QOS, so wait to be merged. //FIXME, same with above
69 ********************************************************************************************************************/
70 static u8 RxTsDeleteBA(struct ieee80211_device *ieee, PRX_TS_RECORD pRxTs)
72 PBA_RECORD pBa = &pRxTs->RxAdmittedBARecord;
73 u8 bSendDELBA = false;
77 DeActivateBAEntry(ieee, pBa);
84 /********************************************************************************************************************
85 *function: reset BA entry
87 * PBA_RECORD pBA //entry to be reset
89 ********************************************************************************************************************/
90 void ResetBaEntry( PBA_RECORD pBA)
93 pBA->BaParamSet.shortData = 0;
94 pBA->BaTimeoutValue = 0;
96 pBA->BaStartSeqCtrl.ShortData = 0;
98 //These functions need porting here or not?
99 /*******************************************************************************************************************************
100 *function: construct ADDBAREQ and ADDBARSP frame here together.
101 * input: u8* Dst //ADDBA frame's destination
102 * PBA_RECORD pBA //BA_RECORD entry which stores the necessary information for BA.
103 * u16 StatusCode //status code in RSP and I will use it to indicate whether it's RSP or REQ(will I?)
104 * u8 type //indicate whether it's RSP(ACT_ADDBARSP) ow REQ(ACT_ADDBAREQ)
106 * return: sk_buff* skb //return constructed skb to xmit
107 *******************************************************************************************************************************/
108 static struct sk_buff *ieee80211_ADDBA(struct ieee80211_device *ieee, u8 *Dst, PBA_RECORD pBA, u16 StatusCode, u8 type)
110 struct sk_buff *skb = NULL;
111 struct ieee80211_hdr_3addr *BAReq = NULL;
114 u16 len = ieee->tx_headroom + 9;
115 //category(1) + action field(1) + Dialog Token(1) + BA Parameter Set(2) + BA Timeout Value(2) + BA Start SeqCtrl(2)(or StatusCode(2))
116 IEEE80211_DEBUG(IEEE80211_DL_TRACE | IEEE80211_DL_BA, "========>%s(), frame(%d) sentd to:%pM, ieee->dev:%p\n", __FUNCTION__, type, Dst, ieee->dev);
117 if (pBA == NULL||ieee == NULL)
119 IEEE80211_DEBUG(IEEE80211_DL_ERR, "pBA(%p) is NULL or ieee(%p) is NULL\n", pBA, ieee);
122 skb = dev_alloc_skb(len + sizeof( struct ieee80211_hdr_3addr)); //need to add something others? FIXME
125 IEEE80211_DEBUG(IEEE80211_DL_ERR, "can't alloc skb for ADDBA_REQ\n");
129 memset(skb->data, 0, sizeof( struct ieee80211_hdr_3addr)); //I wonder whether it's necessary. Apparently kernel will not do it when alloc a skb.
130 skb_reserve(skb, ieee->tx_headroom);
132 BAReq = ( struct ieee80211_hdr_3addr *) skb_put(skb,sizeof( struct ieee80211_hdr_3addr));
134 memcpy(BAReq->addr1, Dst, ETH_ALEN);
135 memcpy(BAReq->addr2, ieee->dev->dev_addr, ETH_ALEN);
137 memcpy(BAReq->addr3, ieee->current_network.bssid, ETH_ALEN);
139 BAReq->frame_ctl = cpu_to_le16(IEEE80211_STYPE_MANAGE_ACT); //action frame
141 //tag += sizeof( struct ieee80211_hdr_3addr); //move to action field
142 tag = (u8 *)skb_put(skb, 9);
146 *tag ++= pBA->DialogToken;
148 if (ACT_ADDBARSP == type)
151 printk("=====>to send ADDBARSP\n");
152 tmp = cpu_to_le16(StatusCode);
153 memcpy(tag, (u8 *)&tmp, 2);
157 tmp = cpu_to_le16(pBA->BaParamSet.shortData);
158 memcpy(tag, (u8 *)&tmp, 2);
161 tmp = cpu_to_le16(pBA->BaTimeoutValue);
162 memcpy(tag, (u8 *)&tmp, 2);
165 if (ACT_ADDBAREQ == type)
168 memcpy(tag,(u8 *)&(pBA->BaStartSeqCtrl), 2);
172 IEEE80211_DEBUG_DATA(IEEE80211_DL_DATA|IEEE80211_DL_BA, skb->data, skb->len);
178 /********************************************************************************************************************
179 *function: construct DELBA frame
180 * input: u8* dst //DELBA frame's destination
181 * PBA_RECORD pBA //BA_RECORD entry which stores the necessary information for BA
182 * TR_SELECT TxRxSelect //TX RX direction
183 * u16 ReasonCode //status code.
185 * return: sk_buff* skb //return constructed skb to xmit
186 ********************************************************************************************************************/
187 static struct sk_buff *ieee80211_DELBA(
188 struct ieee80211_device *ieee,
191 TR_SELECT TxRxSelect,
195 DELBA_PARAM_SET DelbaParamSet;
196 struct sk_buff *skb = NULL;
197 struct ieee80211_hdr_3addr *Delba = NULL;
200 //len = head len + DELBA Parameter Set(2) + Reason Code(2)
201 u16 len = 6 + ieee->tx_headroom;
204 IEEE80211_DEBUG(IEEE80211_DL_TRACE | IEEE80211_DL_BA, "========>%s(), ReasonCode(%d) sentd to:%pM\n", __FUNCTION__, ReasonCode, dst);
206 memset(&DelbaParamSet, 0, 2);
208 DelbaParamSet.field.Initiator = (TxRxSelect==TX_DIR)?1:0;
209 DelbaParamSet.field.TID = pBA->BaParamSet.field.TID;
211 skb = dev_alloc_skb(len + sizeof( struct ieee80211_hdr_3addr)); //need to add something others? FIXME
214 IEEE80211_DEBUG(IEEE80211_DL_ERR, "can't alloc skb for ADDBA_REQ\n");
217 // memset(skb->data, 0, len+sizeof( struct ieee80211_hdr_3addr));
218 skb_reserve(skb, ieee->tx_headroom);
220 Delba = ( struct ieee80211_hdr_3addr *) skb_put(skb,sizeof( struct ieee80211_hdr_3addr));
222 memcpy(Delba->addr1, dst, ETH_ALEN);
223 memcpy(Delba->addr2, ieee->dev->dev_addr, ETH_ALEN);
224 memcpy(Delba->addr3, ieee->current_network.bssid, ETH_ALEN);
225 Delba->frame_ctl = cpu_to_le16(IEEE80211_STYPE_MANAGE_ACT); //action frame
227 tag = (u8 *)skb_put(skb, 6);
232 // DELBA Parameter Set
233 tmp = cpu_to_le16(DelbaParamSet.shortData);
234 memcpy(tag, (u8 *)&tmp, 2);
237 tmp = cpu_to_le16(ReasonCode);
238 memcpy(tag, (u8 *)&tmp, 2);
241 IEEE80211_DEBUG_DATA(IEEE80211_DL_DATA|IEEE80211_DL_BA, skb->data, skb->len);
243 IEEE80211_DEBUG(IEEE80211_DL_TRACE | IEEE80211_DL_BA, "<=====%s()\n", __FUNCTION__);
247 /********************************************************************************************************************
248 *function: send ADDBAReq frame out
249 * input: u8* dst //ADDBAReq frame's destination
250 * PBA_RECORD pBA //BA_RECORD entry which stores the necessary information for BA
252 * notice: If any possible, please hide pBA in ieee. And temporarily use Manage Queue as softmac_mgmt_xmit() usually does
253 ********************************************************************************************************************/
254 static void ieee80211_send_ADDBAReq(struct ieee80211_device *ieee,
255 u8 *dst, PBA_RECORD pBA)
257 struct sk_buff *skb = NULL;
258 skb = ieee80211_ADDBA(ieee, dst, pBA, 0, ACT_ADDBAREQ); //construct ACT_ADDBAREQ frames so set statuscode zero.
262 softmac_mgmt_xmit(skb, ieee);
263 //add statistic needed here.
264 //and skb will be freed in softmac_mgmt_xmit(), so omit all dev_kfree_skb_any() outside softmac_mgmt_xmit()
269 IEEE80211_DEBUG(IEEE80211_DL_ERR, "alloc skb error in function %s()\n", __FUNCTION__);
274 /********************************************************************************************************************
275 *function: send ADDBARSP frame out
276 * input: u8* dst //DELBA frame's destination
277 * PBA_RECORD pBA //BA_RECORD entry which stores the necessary information for BA
278 * u16 StatusCode //RSP StatusCode
280 * notice: If any possible, please hide pBA in ieee. And temporarily use Manage Queue as softmac_mgmt_xmit() usually does
281 ********************************************************************************************************************/
282 static void ieee80211_send_ADDBARsp(struct ieee80211_device *ieee, u8 *dst,
283 PBA_RECORD pBA, u16 StatusCode)
285 struct sk_buff *skb = NULL;
286 skb = ieee80211_ADDBA(ieee, dst, pBA, StatusCode, ACT_ADDBARSP); //construct ACT_ADDBARSP frames
289 softmac_mgmt_xmit(skb, ieee);
294 IEEE80211_DEBUG(IEEE80211_DL_ERR, "alloc skb error in function %s()\n", __FUNCTION__);
300 /********************************************************************************************************************
301 *function: send ADDBARSP frame out
302 * input: u8* dst //DELBA frame's destination
303 * PBA_RECORD pBA //BA_RECORD entry which stores the necessary information for BA
304 * TR_SELECT TxRxSelect //TX or RX
305 * u16 ReasonCode //DEL ReasonCode
307 * notice: If any possible, please hide pBA in ieee. And temporarily use Manage Queue as softmac_mgmt_xmit() usually does
308 ********************************************************************************************************************/
310 static void ieee80211_send_DELBA(struct ieee80211_device *ieee, u8 *dst,
311 PBA_RECORD pBA, TR_SELECT TxRxSelect,
314 struct sk_buff *skb = NULL;
315 skb = ieee80211_DELBA(ieee, dst, pBA, TxRxSelect, ReasonCode); //construct ACT_ADDBARSP frames
318 softmac_mgmt_xmit(skb, ieee);
323 IEEE80211_DEBUG(IEEE80211_DL_ERR, "alloc skb error in function %s()\n", __FUNCTION__);
328 /********************************************************************************************************************
329 *function: RX ADDBAReq
330 * input: struct sk_buff * skb //incoming ADDBAReq skb.
331 * return: 0(pass), other(fail)
332 * notice: As this function need support of QOS, I comment some code out. And when qos is ready, this code need to be support.
333 ********************************************************************************************************************/
334 int ieee80211_rx_ADDBAReq( struct ieee80211_device *ieee, struct sk_buff *skb)
336 struct ieee80211_hdr_3addr *req = NULL;
338 u8 *dst = NULL, *pDialogToken = NULL, *tag = NULL;
339 PBA_RECORD pBA = NULL;
340 PBA_PARAM_SET pBaParamSet = NULL;
341 u16 *pBaTimeoutVal = NULL;
342 PSEQUENCE_CONTROL pBaStartSeqCtrl = NULL;
343 PRX_TS_RECORD pTS = NULL;
345 if (skb->len < sizeof( struct ieee80211_hdr_3addr) + 9)
347 IEEE80211_DEBUG(IEEE80211_DL_ERR, " Invalid skb len in BAREQ(%d / %zu)\n", skb->len, (sizeof( struct ieee80211_hdr_3addr) + 9));
351 IEEE80211_DEBUG_DATA(IEEE80211_DL_DATA|IEEE80211_DL_BA, skb->data, skb->len);
353 req = ( struct ieee80211_hdr_3addr *) skb->data;
355 dst = (u8 *)(&req->addr2[0]);
356 tag += sizeof( struct ieee80211_hdr_3addr);
357 pDialogToken = tag + 2; //category+action
358 pBaParamSet = (PBA_PARAM_SET)(tag + 3); //+DialogToken
359 pBaTimeoutVal = (u16 *)(tag + 5);
360 pBaStartSeqCtrl = (PSEQUENCE_CONTROL)(req + 7);
362 printk("====================>rx ADDBAREQ from :%pM\n", dst);
363 //some other capability is not ready now.
364 if( (ieee->current_network.qos_data.active == 0) ||
365 (ieee->pHTInfo->bCurrentHTSupport == false)) //||
366 // (ieee->pStaQos->bEnableRxImmBA == false) )
368 rc = ADDBA_STATUS_REFUSED;
369 IEEE80211_DEBUG(IEEE80211_DL_ERR, "Failed to reply on ADDBA_REQ as some capability is not ready(%d, %d)\n", ieee->current_network.qos_data.active, ieee->pHTInfo->bCurrentHTSupport);
370 goto OnADDBAReq_Fail;
372 // Search for related traffic stream.
373 // If there is no matched TS, reject the ADDBA request.
376 (PTS_COMMON_INFO *)(&pTS),
378 (u8)(pBaParamSet->field.TID),
382 rc = ADDBA_STATUS_REFUSED;
383 IEEE80211_DEBUG(IEEE80211_DL_ERR, "can't get TS in %s()\n", __FUNCTION__);
384 goto OnADDBAReq_Fail;
386 pBA = &pTS->RxAdmittedBARecord;
387 // To Determine the ADDBA Req content
388 // We can do much more check here, including BufferSize, AMSDU_Support, Policy, StartSeqCtrl...
389 // I want to check StartSeqCtrl to make sure when we start aggregation!!!
391 if(pBaParamSet->field.BAPolicy == BA_POLICY_DELAYED)
393 rc = ADDBA_STATUS_INVALID_PARAM;
394 IEEE80211_DEBUG(IEEE80211_DL_ERR, "BA Policy is not correct in %s()\n", __FUNCTION__);
395 goto OnADDBAReq_Fail;
397 // Admit the ADDBA Request
399 DeActivateBAEntry(ieee, pBA);
400 pBA->DialogToken = *pDialogToken;
401 pBA->BaParamSet = *pBaParamSet;
402 pBA->BaTimeoutValue = *pBaTimeoutVal;
403 pBA->BaStartSeqCtrl = *pBaStartSeqCtrl;
404 //for half N mode we only aggregate 1 frame
405 if (ieee->GetHalfNmodeSupportByAPsHandler(ieee->dev))
406 pBA->BaParamSet.field.BufferSize = 1;
408 pBA->BaParamSet.field.BufferSize = 32;
409 ActivateBAEntry(ieee, pBA, pBA->BaTimeoutValue);
410 ieee80211_send_ADDBARsp(ieee, dst, pBA, ADDBA_STATUS_SUCCESS);
418 BA.BaParamSet = *pBaParamSet;
419 BA.BaTimeoutValue = *pBaTimeoutVal;
420 BA.DialogToken = *pDialogToken;
421 BA.BaParamSet.field.BAPolicy = BA_POLICY_IMMEDIATE;
422 ieee80211_send_ADDBARsp(ieee, dst, &BA, rc);
423 return 0; //we send RSP out.
428 /********************************************************************************************************************
429 *function: RX ADDBARSP
430 * input: struct sk_buff * skb //incoming ADDBAReq skb.
431 * return: 0(pass), other(fail)
432 * notice: As this function need support of QOS, I comment some code out. And when qos is ready, this code need to be support.
433 ********************************************************************************************************************/
434 int ieee80211_rx_ADDBARsp( struct ieee80211_device *ieee, struct sk_buff *skb)
436 struct ieee80211_hdr_3addr *rsp = NULL;
437 PBA_RECORD pPendingBA, pAdmittedBA;
438 PTX_TS_RECORD pTS = NULL;
439 u8 *dst = NULL, *pDialogToken = NULL, *tag = NULL;
440 u16 *pStatusCode = NULL, *pBaTimeoutVal = NULL;
441 PBA_PARAM_SET pBaParamSet = NULL;
444 if (skb->len < sizeof( struct ieee80211_hdr_3addr) + 9)
446 IEEE80211_DEBUG(IEEE80211_DL_ERR, " Invalid skb len in BARSP(%d / %zu)\n", skb->len, (sizeof( struct ieee80211_hdr_3addr) + 9));
449 rsp = ( struct ieee80211_hdr_3addr *)skb->data;
451 dst = (u8 *)(&rsp->addr2[0]);
452 tag += sizeof( struct ieee80211_hdr_3addr);
453 pDialogToken = tag + 2;
454 pStatusCode = (u16 *)(tag + 3);
455 pBaParamSet = (PBA_PARAM_SET)(tag + 5);
456 pBaTimeoutVal = (u16 *)(tag + 7);
458 // Check the capability
459 // Since we can always receive A-MPDU, we just check if it is under HT mode.
460 if( ieee->current_network.qos_data.active == 0 ||
461 ieee->pHTInfo->bCurrentHTSupport == false ||
462 ieee->pHTInfo->bCurrentAMPDUEnable == false )
464 IEEE80211_DEBUG(IEEE80211_DL_ERR, "reject to ADDBA_RSP as some capability is not ready(%d, %d, %d)\n",ieee->current_network.qos_data.active, ieee->pHTInfo->bCurrentHTSupport, ieee->pHTInfo->bCurrentAMPDUEnable);
465 ReasonCode = DELBA_REASON_UNKNOWN_BA;
466 goto OnADDBARsp_Reject;
471 // Search for related TS.
472 // If there is no TS found, we wil reject ADDBA Rsp by sending DELBA frame.
476 (PTS_COMMON_INFO *)(&pTS),
478 (u8)(pBaParamSet->field.TID),
482 IEEE80211_DEBUG(IEEE80211_DL_ERR, "can't get TS in %s()\n", __FUNCTION__);
483 ReasonCode = DELBA_REASON_UNKNOWN_BA;
484 goto OnADDBARsp_Reject;
487 pTS->bAddBaReqInProgress = false;
488 pPendingBA = &pTS->TxPendingBARecord;
489 pAdmittedBA = &pTS->TxAdmittedBARecord;
493 // Check if related BA is waiting for setup.
494 // If not, reject by sending DELBA frame.
496 if((pAdmittedBA->bValid==true))
498 // Since BA is already setup, we ignore all other ADDBA Response.
499 IEEE80211_DEBUG(IEEE80211_DL_BA, "OnADDBARsp(): Recv ADDBA Rsp. Drop because already admit it! \n");
502 else if((pPendingBA->bValid == false) ||(*pDialogToken != pPendingBA->DialogToken))
504 IEEE80211_DEBUG(IEEE80211_DL_ERR, "OnADDBARsp(): Recv ADDBA Rsp. BA invalid, DELBA! \n");
505 ReasonCode = DELBA_REASON_UNKNOWN_BA;
506 goto OnADDBARsp_Reject;
510 IEEE80211_DEBUG(IEEE80211_DL_BA, "OnADDBARsp(): Recv ADDBA Rsp. BA is admitted! Status code:%X\n", *pStatusCode);
511 DeActivateBAEntry(ieee, pPendingBA);
515 if(*pStatusCode == ADDBA_STATUS_SUCCESS)
518 // Determine ADDBA Rsp content here.
519 // We can compare the value of BA parameter set that Peer returned and Self sent.
520 // If it is OK, then admitted. Or we can send DELBA to cancel BA mechanism.
522 if(pBaParamSet->field.BAPolicy == BA_POLICY_DELAYED)
524 // Since this is a kind of ADDBA failed, we delay next ADDBA process.
525 pTS->bAddBaReqDelayed = true;
526 DeActivateBAEntry(ieee, pAdmittedBA);
527 ReasonCode = DELBA_REASON_END_BA;
528 goto OnADDBARsp_Reject;
533 // Admitted condition
535 pAdmittedBA->DialogToken = *pDialogToken;
536 pAdmittedBA->BaTimeoutValue = *pBaTimeoutVal;
537 pAdmittedBA->BaStartSeqCtrl = pPendingBA->BaStartSeqCtrl;
538 pAdmittedBA->BaParamSet = *pBaParamSet;
539 DeActivateBAEntry(ieee, pAdmittedBA);
540 ActivateBAEntry(ieee, pAdmittedBA, *pBaTimeoutVal);
544 // Delay next ADDBA process.
545 pTS->bAddBaReqDelayed = true;
554 BA.BaParamSet = *pBaParamSet;
555 ieee80211_send_DELBA(ieee, dst, &BA, TX_DIR, ReasonCode);
561 /********************************************************************************************************************
563 * input: struct sk_buff * skb //incoming ADDBAReq skb.
564 * return: 0(pass), other(fail)
565 * notice: As this function need support of QOS, I comment some code out. And when qos is ready, this code need to be support.
566 ********************************************************************************************************************/
567 int ieee80211_rx_DELBA(struct ieee80211_device *ieee,struct sk_buff *skb)
569 struct ieee80211_hdr_3addr *delba = NULL;
570 PDELBA_PARAM_SET pDelBaParamSet = NULL;
571 u16 *pReasonCode = NULL;
574 if (skb->len < sizeof( struct ieee80211_hdr_3addr) + 6)
576 IEEE80211_DEBUG(IEEE80211_DL_ERR, " Invalid skb len in DELBA(%d / %zu)\n", skb->len, (sizeof( struct ieee80211_hdr_3addr) + 6));
580 if(ieee->current_network.qos_data.active == 0 ||
581 ieee->pHTInfo->bCurrentHTSupport == false )
583 IEEE80211_DEBUG(IEEE80211_DL_ERR, "received DELBA while QOS or HT is not supported(%d, %d)\n",ieee->current_network.qos_data.active, ieee->pHTInfo->bCurrentHTSupport);
587 IEEE80211_DEBUG_DATA(IEEE80211_DL_DATA|IEEE80211_DL_BA, skb->data, skb->len);
588 delba = ( struct ieee80211_hdr_3addr *)skb->data;
589 dst = (u8 *)(&delba->addr2[0]);
590 delba += sizeof( struct ieee80211_hdr_3addr);
591 pDelBaParamSet = (PDELBA_PARAM_SET)(delba+2);
592 pReasonCode = (u16 *)(delba+4);
594 if(pDelBaParamSet->field.Initiator == 1)
600 (PTS_COMMON_INFO *)&pRxTs,
602 (u8)pDelBaParamSet->field.TID,
606 IEEE80211_DEBUG(IEEE80211_DL_ERR, "can't get TS for RXTS in %s()\n", __FUNCTION__);
610 RxTsDeleteBA(ieee, pRxTs);
618 (PTS_COMMON_INFO *)&pTxTs,
620 (u8)pDelBaParamSet->field.TID,
624 IEEE80211_DEBUG(IEEE80211_DL_ERR, "can't get TS for TXTS in %s()\n", __FUNCTION__);
628 pTxTs->bUsingBa = false;
629 pTxTs->bAddBaReqInProgress = false;
630 pTxTs->bAddBaReqDelayed = false;
631 del_timer_sync(&pTxTs->TsAddBaTimer);
632 //PlatformCancelTimer(Adapter, &pTxTs->TsAddBaTimer);
633 TxTsDeleteBA(ieee, pTxTs);
639 // ADDBA initiate. This can only be called by TX side.
643 struct ieee80211_device *ieee,
649 PBA_RECORD pBA = &pTS->TxPendingBARecord;
651 if(pBA->bValid==true && bOverwritePending==false)
654 // Set parameters to "Pending" variable set
655 DeActivateBAEntry(ieee, pBA);
657 pBA->DialogToken++; // DialogToken: Only keep the latest dialog token
658 pBA->BaParamSet.field.AMSDU_Support = 0; // Do not support A-MSDU with A-MPDU now!!
659 pBA->BaParamSet.field.BAPolicy = Policy; // Policy: Delayed or Immediate
660 pBA->BaParamSet.field.TID = pTS->TsCommonInfo.TSpec.f.TSInfo.field.ucTSID; // TID
661 // BufferSize: This need to be set according to A-MPDU vector
662 pBA->BaParamSet.field.BufferSize = 32; // BufferSize: This need to be set according to A-MPDU vector
663 pBA->BaTimeoutValue = 0; // Timeout value: Set 0 to disable Timer
664 pBA->BaStartSeqCtrl.field.SeqNum = (pTS->TxCurSeq + 3) % 4096; // Block Ack will start after 3 packets later.
666 ActivateBAEntry(ieee, pBA, BA_SETUP_TIMEOUT);
668 ieee80211_send_ADDBAReq(ieee, pTS->TsCommonInfo.Addr, pBA);
672 TsInitDelBA( struct ieee80211_device *ieee, PTS_COMMON_INFO pTsCommonInfo, TR_SELECT TxRxSelect)
675 if(TxRxSelect == TX_DIR)
677 PTX_TS_RECORD pTxTs = (PTX_TS_RECORD)pTsCommonInfo;
679 if(TxTsDeleteBA(ieee, pTxTs))
680 ieee80211_send_DELBA(
683 (pTxTs->TxAdmittedBARecord.bValid)?(&pTxTs->TxAdmittedBARecord):(&pTxTs->TxPendingBARecord),
685 DELBA_REASON_END_BA);
687 else if(TxRxSelect == RX_DIR)
689 PRX_TS_RECORD pRxTs = (PRX_TS_RECORD)pTsCommonInfo;
690 if(RxTsDeleteBA(ieee, pRxTs))
691 ieee80211_send_DELBA(
694 &pRxTs->RxAdmittedBARecord,
696 DELBA_REASON_END_BA );
699 /********************************************************************************************************************
700 *function: BA setup timer
701 * input: unsigned long data //acturally we send TX_TS_RECORD or RX_TS_RECORD to these timer
704 ********************************************************************************************************************/
705 void BaSetupTimeOut(unsigned long data)
707 PTX_TS_RECORD pTxTs = (PTX_TS_RECORD)data;
709 pTxTs->bAddBaReqInProgress = false;
710 pTxTs->bAddBaReqDelayed = true;
711 pTxTs->TxPendingBARecord.bValid = false;
714 void TxBaInactTimeout(unsigned long data)
716 PTX_TS_RECORD pTxTs = (PTX_TS_RECORD)data;
717 struct ieee80211_device *ieee = container_of(pTxTs, struct ieee80211_device, TxTsRecord[pTxTs->num]);
718 TxTsDeleteBA(ieee, pTxTs);
719 ieee80211_send_DELBA(
721 pTxTs->TsCommonInfo.Addr,
722 &pTxTs->TxAdmittedBARecord,
724 DELBA_REASON_TIMEOUT);
727 void RxBaInactTimeout(unsigned long data)
729 PRX_TS_RECORD pRxTs = (PRX_TS_RECORD)data;
730 struct ieee80211_device *ieee = container_of(pRxTs, struct ieee80211_device, RxTsRecord[pRxTs->num]);
732 RxTsDeleteBA(ieee, pRxTs);
733 ieee80211_send_DELBA(
735 pRxTs->TsCommonInfo.Addr,
736 &pRxTs->RxAdmittedBARecord,
738 DELBA_REASON_TIMEOUT);