tty: serial: 8250_core: provide a function to export uart_8250_port
[cascardo/linux.git] / drivers / tty / serial / 8250 / 8250.h
1 /*
2  *  Driver for 8250/16550-type serial ports
3  *
4  *  Based on drivers/char/serial.c, by Linus Torvalds, Theodore Ts'o.
5  *
6  *  Copyright (C) 2001 Russell King.
7  *
8  * This program is free software; you can redistribute it and/or modify
9  * it under the terms of the GNU General Public License as published by
10  * the Free Software Foundation; either version 2 of the License, or
11  * (at your option) any later version.
12  */
13
14 #include <linux/serial_8250.h>
15 #include <linux/serial_reg.h>
16 #include <linux/dmaengine.h>
17
18 struct uart_8250_dma {
19         dma_filter_fn           fn;
20         void                    *rx_param;
21         void                    *tx_param;
22
23         int                     rx_chan_id;
24         int                     tx_chan_id;
25
26         struct dma_slave_config rxconf;
27         struct dma_slave_config txconf;
28
29         struct dma_chan         *rxchan;
30         struct dma_chan         *txchan;
31
32         dma_addr_t              rx_addr;
33         dma_addr_t              tx_addr;
34
35         dma_cookie_t            rx_cookie;
36         dma_cookie_t            tx_cookie;
37
38         void                    *rx_buf;
39
40         size_t                  rx_size;
41         size_t                  tx_size;
42
43         unsigned char           tx_running:1;
44 };
45
46 struct old_serial_port {
47         unsigned int uart;
48         unsigned int baud_base;
49         unsigned int port;
50         unsigned int irq;
51         unsigned int flags;
52         unsigned char hub6;
53         unsigned char io_type;
54         unsigned char *iomem_base;
55         unsigned short iomem_reg_shift;
56         unsigned long irqflags;
57 };
58
59 struct serial8250_config {
60         const char      *name;
61         unsigned short  fifo_size;
62         unsigned short  tx_loadsz;
63         unsigned char   fcr;
64         unsigned char   rxtrig_bytes[UART_FCR_R_TRIG_MAX_STATE];
65         unsigned int    flags;
66 };
67
68 #define UART_CAP_FIFO   (1 << 8)        /* UART has FIFO */
69 #define UART_CAP_EFR    (1 << 9)        /* UART has EFR */
70 #define UART_CAP_SLEEP  (1 << 10)       /* UART has IER sleep */
71 #define UART_CAP_AFE    (1 << 11)       /* MCR-based hw flow control */
72 #define UART_CAP_UUE    (1 << 12)       /* UART needs IER bit 6 set (Xscale) */
73 #define UART_CAP_RTOIE  (1 << 13)       /* UART needs IER bit 4 set (Xscale, Tegra) */
74 #define UART_CAP_HFIFO  (1 << 14)       /* UART has a "hidden" FIFO */
75
76 #define UART_BUG_QUOT   (1 << 0)        /* UART has buggy quot LSB */
77 #define UART_BUG_TXEN   (1 << 1)        /* UART has buggy TX IIR status */
78 #define UART_BUG_NOMSR  (1 << 2)        /* UART has buggy MSR status bits (Au1x00) */
79 #define UART_BUG_THRE   (1 << 3)        /* UART has buggy THRE reassertion */
80 #define UART_BUG_PARITY (1 << 4)        /* UART mishandles parity if FIFO enabled */
81
82 #define PROBE_RSA       (1 << 0)
83 #define PROBE_ANY       (~0)
84
85 #define HIGH_BITS_OFFSET ((sizeof(long)-sizeof(int))*8)
86
87 #ifdef CONFIG_SERIAL_8250_SHARE_IRQ
88 #define SERIAL8250_SHARE_IRQS 1
89 #else
90 #define SERIAL8250_SHARE_IRQS 0
91 #endif
92
93 static inline int serial_in(struct uart_8250_port *up, int offset)
94 {
95         return up->port.serial_in(&up->port, offset);
96 }
97
98 static inline void serial_out(struct uart_8250_port *up, int offset, int value)
99 {
100         up->port.serial_out(&up->port, offset, value);
101 }
102
103 void serial8250_clear_and_reinit_fifos(struct uart_8250_port *p);
104
105 static inline int serial_dl_read(struct uart_8250_port *up)
106 {
107         return up->dl_read(up);
108 }
109
110 static inline void serial_dl_write(struct uart_8250_port *up, int value)
111 {
112         up->dl_write(up, value);
113 }
114
115 struct uart_8250_port *serial8250_get_port(int line);
116
117 #if defined(__alpha__) && !defined(CONFIG_PCI)
118 /*
119  * Digital did something really horribly wrong with the OUT1 and OUT2
120  * lines on at least some ALPHA's.  The failure mode is that if either
121  * is cleared, the machine locks up with endless interrupts.
122  */
123 #define ALPHA_KLUDGE_MCR  (UART_MCR_OUT2 | UART_MCR_OUT1)
124 #else
125 #define ALPHA_KLUDGE_MCR 0
126 #endif
127
128 #ifdef CONFIG_SERIAL_8250_PNP
129 int serial8250_pnp_init(void);
130 void serial8250_pnp_exit(void);
131 #else
132 static inline int serial8250_pnp_init(void) { return 0; }
133 static inline void serial8250_pnp_exit(void) { }
134 #endif
135
136 #ifdef CONFIG_ARCH_OMAP1
137 static inline int is_omap1_8250(struct uart_8250_port *pt)
138 {
139         int res;
140
141         switch (pt->port.mapbase) {
142         case OMAP1_UART1_BASE:
143         case OMAP1_UART2_BASE:
144         case OMAP1_UART3_BASE:
145                 res = 1;
146                 break;
147         default:
148                 res = 0;
149                 break;
150         }
151
152         return res;
153 }
154
155 static inline int is_omap1510_8250(struct uart_8250_port *pt)
156 {
157         if (!cpu_is_omap1510())
158                 return 0;
159
160         return is_omap1_8250(pt);
161 }
162 #else
163 static inline int is_omap1_8250(struct uart_8250_port *pt)
164 {
165         return 0;
166 }
167 static inline int is_omap1510_8250(struct uart_8250_port *pt)
168 {
169         return 0;
170 }
171 #endif
172
173 #ifdef CONFIG_SERIAL_8250_DMA
174 extern int serial8250_tx_dma(struct uart_8250_port *);
175 extern int serial8250_rx_dma(struct uart_8250_port *, unsigned int iir);
176 extern int serial8250_request_dma(struct uart_8250_port *);
177 extern void serial8250_release_dma(struct uart_8250_port *);
178 #else
179 static inline int serial8250_tx_dma(struct uart_8250_port *p)
180 {
181         return -1;
182 }
183 static inline int serial8250_rx_dma(struct uart_8250_port *p, unsigned int iir)
184 {
185         return -1;
186 }
187 static inline int serial8250_request_dma(struct uart_8250_port *p)
188 {
189         return -1;
190 }
191 static inline void serial8250_release_dma(struct uart_8250_port *p) { }
192 #endif