drivers/usb/host/xhci-hub.c

   1 /*
   2  * xHCI host controller driver
   3  *
   4  * Copyright (C) 2008 Intel Corp.
   5  *
   6  * Author: Sarah Sharp
   7  * Some code borrowed from the Linux EHCI driver.
   8  *
   9  * This program is free software; you can redistribute it and/or modify
  10  * it under the terms of the GNU General Public License version 2 as
  11  * published by the Free Software Foundation.
  12  *
  13  * This program is distributed in the hope that it will be useful, but
  14  * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
  15  * or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
  16  * for more details.
  17  *
  18  * You should have received a copy of the GNU General Public License
  19  * along with this program; if not, write to the Free Software Foundation,
  20  * Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  21  */
  22
  23 #include <linux/gfp.h>
  24 #include <asm/unaligned.h>
  25
  26 #include "xhci.h"
  27
  28 #define PORT_WAKE_BITS  (PORT_WKOC_E | PORT_WKDISC_E | PORT_WKCONN_E)
  29 #define PORT_RWC_BITS   (PORT_CSC | PORT_PEC | PORT_WRC | PORT_OCC | \
  30                          PORT_RC | PORT_PLC | PORT_PE)
  31
  32 /* usb 1.1 root hub device descriptor */
  33 static u8 usb_bos_descriptor [] = {
  34         USB_DT_BOS_SIZE,                /*  __u8 bLength, 5 bytes */
  35         USB_DT_BOS,                     /*  __u8 bDescriptorType */
  36         0x0F, 0x00,                     /*  __le16 wTotalLength, 15 bytes */
  37         0x1,                            /*  __u8 bNumDeviceCaps */
  38         /* First device capability */
  39         USB_DT_USB_SS_CAP_SIZE,         /*  __u8 bLength, 10 bytes */
  40         USB_DT_DEVICE_CAPABILITY,       /* Device Capability */
  41         USB_SS_CAP_TYPE,                /* bDevCapabilityType, SUPERSPEED_USB */
  42         0x00,                           /* bmAttributes, LTM off by default */
  43         USB_5GBPS_OPERATION, 0x00,      /* wSpeedsSupported, 5Gbps only */
  44         0x03,                           /* bFunctionalitySupport,
  45                                            USB 3.0 speed only */
  46         0x00,                           /* bU1DevExitLat, set later. */
  47         0x00, 0x00                      /* __le16 bU2DevExitLat, set later. */
  48 };
  49
  50
  51 static void xhci_common_hub_descriptor(struct xhci_hcd *xhci,
  52                 struct usb_hub_descriptor *desc, int ports)
  53 {
  54         u16 temp;
  55
  56         desc->bPwrOn2PwrGood = 10;      /* xhci section 5.4.9 says 20ms max */
  57         desc->bHubContrCurrent = 0;
  58
  59         desc->bNbrPorts = ports;
  60         temp = 0;
  61         /* Bits 1:0 - support per-port power switching, or power always on */
  62         if (HCC_PPC(xhci->hcc_params))
  63                 temp |= HUB_CHAR_INDV_PORT_LPSM;
  64         else
  65                 temp |= HUB_CHAR_NO_LPSM;
  66         /* Bit  2 - root hubs are not part of a compound device */
  67         /* Bits 4:3 - individual port over current protection */
  68         temp |= HUB_CHAR_INDV_PORT_OCPM;
  69         /* Bits 6:5 - no TTs in root ports */
  70         /* Bit  7 - no port indicators */
  71         desc->wHubCharacteristics = cpu_to_le16(temp);
  72 }
  73
  74 /* Fill in the USB 2.0 roothub descriptor */
  75 static void xhci_usb2_hub_descriptor(struct usb_hcd *hcd, struct xhci_hcd *xhci,
  76                 struct usb_hub_descriptor *desc)
  77 {
  78         int ports;
  79         u16 temp;
  80         __u8 port_removable[(USB_MAXCHILDREN + 1 + 7) / 8];
  81         u32 portsc;
  82         unsigned int i;
  83
  84         ports = xhci->num_usb2_ports;
  85
  86         xhci_common_hub_descriptor(xhci, desc, ports);
  87         desc->bDescriptorType = USB_DT_HUB;
  88         temp = 1 + (ports / 8);
  89         desc->bDescLength = USB_DT_HUB_NONVAR_SIZE + 2 * temp;
  90
  91         /* The Device Removable bits are reported on a byte granularity.
  92          * If the port doesn't exist within that byte, the bit is set to 0.
  93          */
  94         memset(port_removable, 0, sizeof(port_removable));
  95         for (i = 0; i < ports; i++) {
  96                 portsc = xhci_readl(xhci, xhci->usb2_ports[i]);
  97                 /* If a device is removable, PORTSC reports a 0, same as in the
  98                  * hub descriptor DeviceRemovable bits.
  99                  */
 100                 if (portsc & PORT_DEV_REMOVE)
 101                         /* This math is hairy because bit 0 of DeviceRemovable
 102                          * is reserved, and bit 1 is for port 1, etc.
 103                          */
 104                         port_removable[(i + 1) / 8] |= 1 << ((i + 1) % 8);
 105         }
 106
 107         /* ch11.h defines a hub descriptor that has room for USB_MAXCHILDREN
 108          * ports on it.  The USB 2.0 specification says that there are two
 109          * variable length fields at the end of the hub descriptor:
 110          * DeviceRemovable and PortPwrCtrlMask.  But since we can have less than
 111          * USB_MAXCHILDREN ports, we may need to use the DeviceRemovable array
 112          * to set PortPwrCtrlMask bits.  PortPwrCtrlMask must always be set to
 113          * 0xFF, so we initialize the both arrays (DeviceRemovable and
 114          * PortPwrCtrlMask) to 0xFF.  Then we set the DeviceRemovable for each
 115          * set of ports that actually exist.
 116          */
 117         memset(desc->u.hs.DeviceRemovable, 0xff,
 118                         sizeof(desc->u.hs.DeviceRemovable));
 119         memset(desc->u.hs.PortPwrCtrlMask, 0xff,
 120                         sizeof(desc->u.hs.PortPwrCtrlMask));
 121
 122         for (i = 0; i < (ports + 1 + 7) / 8; i++)
 123                 memset(&desc->u.hs.DeviceRemovable[i], port_removable[i],
 124                                 sizeof(__u8));
 125 }
 126
 127 /* Fill in the USB 3.0 roothub descriptor */
 128 static void xhci_usb3_hub_descriptor(struct usb_hcd *hcd, struct xhci_hcd *xhci,
 129                 struct usb_hub_descriptor *desc)
 130 {
 131         int ports;
 132         u16 port_removable;
 133         u32 portsc;
 134         unsigned int i;
 135
 136         ports = xhci->num_usb3_ports;
 137         xhci_common_hub_descriptor(xhci, desc, ports);
 138         desc->bDescriptorType = USB_DT_SS_HUB;
 139         desc->bDescLength = USB_DT_SS_HUB_SIZE;
 140
 141         /* header decode latency should be zero for roothubs,
 142          * see section 4.23.5.2.
 143          */
 144         desc->u.ss.bHubHdrDecLat = 0;
 145         desc->u.ss.wHubDelay = 0;
 146
 147         port_removable = 0;
 148         /* bit 0 is reserved, bit 1 is for port 1, etc. */
 149         for (i = 0; i < ports; i++) {
 150                 portsc = xhci_readl(xhci, xhci->usb3_ports[i]);
 151                 if (portsc & PORT_DEV_REMOVE)
 152                         port_removable |= 1 << (i + 1);
 153         }
 154         memset(&desc->u.ss.DeviceRemovable,
 155                         (__force __u16) cpu_to_le16(port_removable),
 156                         sizeof(__u16));
 157 }
 158
 159 static void xhci_hub_descriptor(struct usb_hcd *hcd, struct xhci_hcd *xhci,
 160                 struct usb_hub_descriptor *desc)
 161 {
 162
 163         if (hcd->speed == HCD_USB3)
 164                 xhci_usb3_hub_descriptor(hcd, xhci, desc);
 165         else
 166                 xhci_usb2_hub_descriptor(hcd, xhci, desc);
 167
 168 }
 169
 170 static unsigned int xhci_port_speed(unsigned int port_status)
 171 {
 172         if (DEV_LOWSPEED(port_status))
 173                 return USB_PORT_STAT_LOW_SPEED;
 174         if (DEV_HIGHSPEED(port_status))
 175                 return USB_PORT_STAT_HIGH_SPEED;
 176         /*
 177          * FIXME: Yes, we should check for full speed, but the core uses that as
 178          * a default in portspeed() in usb/core/hub.c (which is the only place
 179          * USB_PORT_STAT_*_SPEED is used).
 180          */
 181         return 0;
 182 }
 183
 184 /*
 185  * These bits are Read Only (RO) and should be saved and written to the
 186  * registers: 0, 3, 10:13, 30
 187  * connect status, over-current status, port speed, and device removable.
 188  * connect status and port speed are also sticky - meaning they're in
 189  * the AUX well and they aren't changed by a hot, warm, or cold reset.
 190  */
 191 #define XHCI_PORT_RO    ((1<<0) | (1<<3) | (0xf<<10) | (1<<30))
 192 /*
 193  * These bits are RW; writing a 0 clears the bit, writing a 1 sets the bit:
 194  * bits 5:8, 9, 14:15, 25:27
 195  * link state, port power, port indicator state, "wake on" enable state
 196  */
 197 #define XHCI_PORT_RWS   ((0xf<<5) | (1<<9) | (0x3<<14) | (0x7<<25))
 198 /*
 199  * These bits are RW; writing a 1 sets the bit, writing a 0 has no effect:
 200  * bit 4 (port reset)
 201  */
 202 #define XHCI_PORT_RW1S  ((1<<4))
 203 /*
 204  * These bits are RW; writing a 1 clears the bit, writing a 0 has no effect:
 205  * bits 1, 17, 18, 19, 20, 21, 22, 23
 206  * port enable/disable, and
 207  * change bits: connect, PED, warm port reset changed (reserved zero for USB 2.0 ports),
 208  * over-current, reset, link state, and L1 change
 209  */
 210 #define XHCI_PORT_RW1CS ((1<<1) | (0x7f<<17))
 211 /*
 212  * Bit 16 is RW, and writing a '1' to it causes the link state control to be
 213  * latched in
 214  */
 215 #define XHCI_PORT_RW    ((1<<16))
 216 /*
 217  * These bits are Reserved Zero (RsvdZ) and zero should be written to them:
 218  * bits 2, 24, 28:31
 219  */
 220 #define XHCI_PORT_RZ    ((1<<2) | (1<<24) | (0xf<<28))
 221
 222 /*
 223  * Given a port state, this function returns a value that would result in the
 224  * port being in the same state, if the value was written to the port status
 225  * control register.
 226  * Save Read Only (RO) bits and save read/write bits where
 227  * writing a 0 clears the bit and writing a 1 sets the bit (RWS).
 228  * For all other types (RW1S, RW1CS, RW, and RZ), writing a '0' has no effect.
 229  */
 230 u32 xhci_port_state_to_neutral(u32 state)
 231 {
 232         /* Save read-only status and port state */
 233         return (state & XHCI_PORT_RO) | (state & XHCI_PORT_RWS);
 234 }
 235
 236 /*
 237  * find slot id based on port number.
 238  * @port: The one-based port number from one of the two split roothubs.
 239  */
 240 int xhci_find_slot_id_by_port(struct usb_hcd *hcd, struct xhci_hcd *xhci,
 241                 u16 port)
 242 {
 243         int slot_id;
 244         int i;
 245         enum usb_device_speed speed;
 246
 247         slot_id = 0;
 248         for (i = 0; i < MAX_HC_SLOTS; i++) {
 249                 if (!xhci->devs[i])
 250                         continue;
 251                 speed = xhci->devs[i]->udev->speed;
 252                 if (((speed == USB_SPEED_SUPER) == (hcd->speed == HCD_USB3))
 253                                 && xhci->devs[i]->fake_port == port) {
 254                         slot_id = i;
 255                         break;
 256                 }
 257         }
 258
 259         return slot_id;
 260 }
 261
 262 /*
 263  * Stop device
 264  * It issues stop endpoint command for EP 0 to 30. And wait the last command
 265  * to complete.
 266  * suspend will set to 1, if suspend bit need to set in command.
 267  */
 268 static int xhci_stop_device(struct xhci_hcd *xhci, int slot_id, int suspend)
 269 {
 270         struct xhci_virt_device *virt_dev;
 271         struct xhci_command *cmd;
 272         unsigned long flags;
 273         int timeleft;
 274         int ret;
 275         int i;
 276
 277         ret = 0;
 278         virt_dev = xhci->devs[slot_id];
 279         cmd = xhci_alloc_command(xhci, false, true, GFP_NOIO);
 280         if (!cmd) {
 281                 xhci_dbg(xhci, "Couldn't allocate command structure.\n");
 282                 return -ENOMEM;
 283         }
 284
 285         spin_lock_irqsave(&xhci->lock, flags);
 286         for (i = LAST_EP_INDEX; i > 0; i--) {
 287                 if (virt_dev->eps[i].ring && virt_dev->eps[i].ring->dequeue)
 288                         xhci_queue_stop_endpoint(xhci, slot_id, i, suspend);
 289         }
 290         cmd->command_trb = xhci->cmd_ring->enqueue;
 291         list_add_tail(&cmd->cmd_list, &virt_dev->cmd_list);
 292         xhci_queue_stop_endpoint(xhci, slot_id, 0, suspend);
 293         xhci_ring_cmd_db(xhci);
 294         spin_unlock_irqrestore(&xhci->lock, flags);
 295
 296         /* Wait for last stop endpoint command to finish */
 297         timeleft = wait_for_completion_interruptible_timeout(
 298                         cmd->completion,
 299                         USB_CTRL_SET_TIMEOUT);
 300         if (timeleft <= 0) {
 301                 xhci_warn(xhci, "%s while waiting for stop endpoint command\n",
 302                                 timeleft == 0 ? "Timeout" : "Signal");
 303                 spin_lock_irqsave(&xhci->lock, flags);
 304                 /* The timeout might have raced with the event ring handler, so
 305                  * only delete from the list if the item isn't poisoned.
 306                  */
 307                 if (cmd->cmd_list.next != LIST_POISON1)
 308                         list_del(&cmd->cmd_list);
 309                 spin_unlock_irqrestore(&xhci->lock, flags);
 310                 ret = -ETIME;
 311                 goto command_cleanup;
 312         }
 313
 314 command_cleanup:
 315         xhci_free_command(xhci, cmd);
 316         return ret;
 317 }
 318
 319 /*
 320  * Ring device, it rings the all doorbells unconditionally.
 321  */
 322 void xhci_ring_device(struct xhci_hcd *xhci, int slot_id)
 323 {
 324         int i;
 325
 326         for (i = 0; i < LAST_EP_INDEX + 1; i++)
 327                 if (xhci->devs[slot_id]->eps[i].ring &&
 328                     xhci->devs[slot_id]->eps[i].ring->dequeue)
 329                         xhci_ring_ep_doorbell(xhci, slot_id, i, 0);
 330
 331         return;
 332 }
 333
 334 static void xhci_disable_port(struct usb_hcd *hcd, struct xhci_hcd *xhci,
 335                 u16 wIndex, __le32 __iomem *addr, u32 port_status)
 336 {
 337         /* Don't allow the USB core to disable SuperSpeed ports. */
 338         if (hcd->speed == HCD_USB3) {
 339                 xhci_dbg(xhci, "Ignoring request to disable "
 340                                 "SuperSpeed port.\n");
 341                 return;
 342         }
 343
 344         /* Write 1 to disable the port */
 345         xhci_writel(xhci, port_status | PORT_PE, addr);
 346         port_status = xhci_readl(xhci, addr);
 347         xhci_dbg(xhci, "disable port, actual port %d status  = 0x%x\n",
 348                         wIndex, port_status);
 349 }
 350
 351 static void xhci_clear_port_change_bit(struct xhci_hcd *xhci, u16 wValue,
 352                 u16 wIndex, __le32 __iomem *addr, u32 port_status)
 353 {
 354         char *port_change_bit;
 355         u32 status;
 356
 357         switch (wValue) {
 358         case USB_PORT_FEAT_C_RESET:
 359                 status = PORT_RC;
 360                 port_change_bit = "reset";
 361                 break;
 362         case USB_PORT_FEAT_C_BH_PORT_RESET:
 363                 status = PORT_WRC;
 364                 port_change_bit = "warm(BH) reset";
 365                 break;
 366         case USB_PORT_FEAT_C_CONNECTION:
 367                 status = PORT_CSC;
 368                 port_change_bit = "connect";
 369                 break;
 370         case USB_PORT_FEAT_C_OVER_CURRENT:
 371                 status = PORT_OCC;
 372                 port_change_bit = "over-current";
 373                 break;
 374         case USB_PORT_FEAT_C_ENABLE:
 375                 status = PORT_PEC;
 376                 port_change_bit = "enable/disable";
 377                 break;
 378         case USB_PORT_FEAT_C_SUSPEND:
 379                 status = PORT_PLC;
 380                 port_change_bit = "suspend/resume";
 381                 break;
 382         case USB_PORT_FEAT_C_PORT_LINK_STATE:
 383                 status = PORT_PLC;
 384                 port_change_bit = "link state";
 385                 break;
 386         default:
 387                 /* Should never happen */
 388                 return;
 389         }
 390         /* Change bits are all write 1 to clear */
 391         xhci_writel(xhci, port_status | status, addr);
 392         port_status = xhci_readl(xhci, addr);
 393         xhci_dbg(xhci, "clear port %s change, actual port %d status  = 0x%x\n",
 394                         port_change_bit, wIndex, port_status);
 395 }
 396
 397 static int xhci_get_ports(struct usb_hcd *hcd, __le32 __iomem ***port_array)
 398 {
 399         int max_ports;
 400         struct xhci_hcd *xhci = hcd_to_xhci(hcd);
 401
 402         if (hcd->speed == HCD_USB3) {
 403                 max_ports = xhci->num_usb3_ports;
 404                 *port_array = xhci->usb3_ports;
 405         } else {
 406                 max_ports = xhci->num_usb2_ports;
 407                 *port_array = xhci->usb2_ports;
 408         }
 409
 410         return max_ports;
 411 }
 412
 413 void xhci_set_link_state(struct xhci_hcd *xhci, __le32 __iomem **port_array,
 414                                 int port_id, u32 link_state)
 415 {
 416         u32 temp;
 417
 418         temp = xhci_readl(xhci, port_array[port_id]);
 419         temp = xhci_port_state_to_neutral(temp);
 420         temp &= ~PORT_PLS_MASK;
 421         temp |= PORT_LINK_STROBE | link_state;
 422         xhci_writel(xhci, temp, port_array[port_id]);
 423 }
 424
 425 void xhci_set_remote_wake_mask(struct xhci_hcd *xhci,
 426                 __le32 __iomem **port_array, int port_id, u16 wake_mask)
 427 {
 428         u32 temp;
 429
 430         temp = xhci_readl(xhci, port_array[port_id]);
 431         temp = xhci_port_state_to_neutral(temp);
 432
 433         if (wake_mask & USB_PORT_FEAT_REMOTE_WAKE_CONNECT)
 434                 temp |= PORT_WKCONN_E;
 435         else
 436                 temp &= ~PORT_WKCONN_E;
 437
 438         if (wake_mask & USB_PORT_FEAT_REMOTE_WAKE_DISCONNECT)
 439                 temp |= PORT_WKDISC_E;
 440         else
 441                 temp &= ~PORT_WKDISC_E;
 442
 443         if (wake_mask & USB_PORT_FEAT_REMOTE_WAKE_OVER_CURRENT)
 444                 temp |= PORT_WKOC_E;
 445         else
 446                 temp &= ~PORT_WKOC_E;
 447
 448         xhci_writel(xhci, temp, port_array[port_id]);
 449 }
 450
 451 /* Test and clear port RWC bit */
 452 void xhci_test_and_clear_bit(struct xhci_hcd *xhci, __le32 __iomem **port_array,
 453                                 int port_id, u32 port_bit)
 454 {
 455         u32 temp;
 456
 457         temp = xhci_readl(xhci, port_array[port_id]);
 458         if (temp & port_bit) {
 459                 temp = xhci_port_state_to_neutral(temp);
 460                 temp |= port_bit;
 461                 xhci_writel(xhci, temp, port_array[port_id]);
 462         }
 463 }
 464
 465 /* Updates Link Status for super Speed port */
 466 static void xhci_hub_report_link_state(u32 *status, u32 status_reg)
 467 {
 468         u32 pls = status_reg & PORT_PLS_MASK;
 469
 470         /* resume state is a xHCI internal state.
 471          * Do not report it to usb core.
 472          */
 473         if (pls == XDEV_RESUME)
 474                 return;
 475
 476         /* When the CAS bit is set then warm reset
 477          * should be performed on port
 478          */
 479         if (status_reg & PORT_CAS) {
 480                 /* The CAS bit can be set while the port is
 481                  * in any link state.
 482                  * Only roothubs have CAS bit, so we
 483                  * pretend to be in compliance mode
 484                  * unless we're already in compliance
 485                  * or the inactive state.
 486                  */
 487                 if (pls != USB_SS_PORT_LS_COMP_MOD &&
 488                     pls != USB_SS_PORT_LS_SS_INACTIVE) {
 489                         pls = USB_SS_PORT_LS_COMP_MOD;
 490                 }
 491                 /* Return also connection bit -
 492                  * hub state machine resets port
 493                  * when this bit is set.
 494                  */
 495                 pls |= USB_PORT_STAT_CONNECTION;
 496         }
 497         /* update status field */
 498         *status |= pls;
 499 }
 500
 501 int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
 502                 u16 wIndex, char *buf, u16 wLength)
 503 {
 504         struct xhci_hcd *xhci = hcd_to_xhci(hcd);
 505         int max_ports;
 506         unsigned long flags;
 507         u32 temp, status;
 508         int retval = 0;
 509         __le32 __iomem **port_array;
 510         int slot_id;
 511         struct xhci_bus_state *bus_state;
 512         u16 link_state = 0;
 513         u16 wake_mask = 0;
 514
 515         max_ports = xhci_get_ports(hcd, &port_array);
 516         bus_state = &xhci->bus_state[hcd_index(hcd)];
 517
 518         spin_lock_irqsave(&xhci->lock, flags);
 519         switch (typeReq) {
 520         case GetHubStatus:
 521                 /* No power source, over-current reported per port */
 522                 memset(buf, 0, 4);
 523                 break;
 524         case GetHubDescriptor:
 525                 /* Check to make sure userspace is asking for the USB 3.0 hub
 526                  * descriptor for the USB 3.0 roothub.  If not, we stall the
 527                  * endpoint, like external hubs do.
 528                  */
 529                 if (hcd->speed == HCD_USB3 &&
 530                                 (wLength < USB_DT_SS_HUB_SIZE ||
 531                                  wValue != (USB_DT_SS_HUB << 8))) {
 532                         xhci_dbg(xhci, "Wrong hub descriptor type for "
 533                                         "USB 3.0 roothub.\n");
 534                         goto error;
 535                 }
 536                 xhci_hub_descriptor(hcd, xhci,
 537                                 (struct usb_hub_descriptor *) buf);
 538                 break;
 539         case DeviceRequest | USB_REQ_GET_DESCRIPTOR:
 540                 if ((wValue & 0xff00) != (USB_DT_BOS << 8))
 541                         goto error;
 542
 543                 if (hcd->speed != HCD_USB3)
 544                         goto error;
 545
 546                 memcpy(buf, &usb_bos_descriptor,
 547                                 USB_DT_BOS_SIZE + USB_DT_USB_SS_CAP_SIZE);
 548                 temp = xhci_readl(xhci, &xhci->cap_regs->hcs_params3);
 549                 buf[12] = HCS_U1_LATENCY(temp);
 550                 put_unaligned_le16(HCS_U2_LATENCY(temp), &buf[13]);
 551
 552                 spin_unlock_irqrestore(&xhci->lock, flags);
 553                 return USB_DT_BOS_SIZE + USB_DT_USB_SS_CAP_SIZE;
 554         case GetPortStatus:
 555                 if (!wIndex || wIndex > max_ports)
 556                         goto error;
 557                 wIndex--;
 558                 status = 0;
 559                 temp = xhci_readl(xhci, port_array[wIndex]);
 560                 if (temp == 0xffffffff) {
 561                         retval = -ENODEV;
 562                         break;
 563                 }
 564                 xhci_dbg(xhci, "get port status, actual port %d status  = 0x%x\n", wIndex, temp);
 565
 566                 /* wPortChange bits */
 567                 if (temp & PORT_CSC)
 568                         status |= USB_PORT_STAT_C_CONNECTION << 16;
 569                 if (temp & PORT_PEC)
 570                         status |= USB_PORT_STAT_C_ENABLE << 16;
 571                 if ((temp & PORT_OCC))
 572                         status |= USB_PORT_STAT_C_OVERCURRENT << 16;
 573                 if ((temp & PORT_RC))
 574                         status |= USB_PORT_STAT_C_RESET << 16;
 575                 /* USB3.0 only */
 576                 if (hcd->speed == HCD_USB3) {
 577                         if ((temp & PORT_PLC))
 578                                 status |= USB_PORT_STAT_C_LINK_STATE << 16;
 579                         if ((temp & PORT_WRC))
 580                                 status |= USB_PORT_STAT_C_BH_RESET << 16;
 581                 }
 582
 583                 if (hcd->speed != HCD_USB3) {
 584                         if ((temp & PORT_PLS_MASK) == XDEV_U3
 585                                         && (temp & PORT_POWER))
 586                                 status |= USB_PORT_STAT_SUSPEND;
 587                 }
 588                 if ((temp & PORT_PLS_MASK) == XDEV_RESUME &&
 589                                 !DEV_SUPERSPEED(temp)) {
 590                         if ((temp & PORT_RESET) || !(temp & PORT_PE))
 591                                 goto error;
 592                         if (time_after_eq(jiffies,
 593                                         bus_state->resume_done[wIndex])) {
 594                                 xhci_dbg(xhci, "Resume USB2 port %d\n",
 595                                         wIndex + 1);
 596                                 bus_state->resume_done[wIndex] = 0;
 597                                 xhci_set_link_state(xhci, port_array, wIndex,
 598                                                         XDEV_U0);
 599                                 xhci_dbg(xhci, "set port %d resume\n",
 600                                         wIndex + 1);
 601                                 slot_id = xhci_find_slot_id_by_port(hcd, xhci,
 602                                                                  wIndex + 1);
 603                                 if (!slot_id) {
 604                                         xhci_dbg(xhci, "slot_id is zero\n");
 605                                         goto error;
 606                                 }
 607                                 xhci_ring_device(xhci, slot_id);
 608                                 bus_state->port_c_suspend |= 1 << wIndex;
 609                                 bus_state->suspended_ports &= ~(1 << wIndex);
 610                         } else {
 611                                 /*
 612                                  * The resume has been signaling for less than
 613                                  * 20ms. Report the port status as SUSPEND,
 614                                  * let the usbcore check port status again
 615                                  * and clear resume signaling later.
 616                                  */
 617                                 status |= USB_PORT_STAT_SUSPEND;
 618                         }
 619                 }
 620                 if ((temp & PORT_PLS_MASK) == XDEV_U0
 621                         && (temp & PORT_POWER)
 622                         && (bus_state->suspended_ports & (1 << wIndex))) {
 623                         bus_state->suspended_ports &= ~(1 << wIndex);
 624                         if (hcd->speed != HCD_USB3)
 625                                 bus_state->port_c_suspend |= 1 << wIndex;
 626                 }
 627                 if (temp & PORT_CONNECT) {
 628                         status |= USB_PORT_STAT_CONNECTION;
 629                         status |= xhci_port_speed(temp);
 630                 }
 631                 if (temp & PORT_PE)
 632                         status |= USB_PORT_STAT_ENABLE;
 633                 if (temp & PORT_OC)
 634                         status |= USB_PORT_STAT_OVERCURRENT;
 635                 if (temp & PORT_RESET)
 636                         status |= USB_PORT_STAT_RESET;
 637                 if (temp & PORT_POWER) {
 638                         if (hcd->speed == HCD_USB3)
 639                                 status |= USB_SS_PORT_STAT_POWER;
 640                         else
 641                                 status |= USB_PORT_STAT_POWER;
 642                 }
 643                 /* Update Port Link State for super speed ports*/
 644                 if (hcd->speed == HCD_USB3) {
 645                         xhci_hub_report_link_state(&status, temp);
 646                 }
 647                 if (bus_state->port_c_suspend & (1 << wIndex))
 648                         status |= 1 << USB_PORT_FEAT_C_SUSPEND;
 649                 xhci_dbg(xhci, "Get port status returned 0x%x\n", status);
 650                 put_unaligned(cpu_to_le32(status), (__le32 *) buf);
 651                 break;
 652         case SetPortFeature:
 653                 if (wValue == USB_PORT_FEAT_LINK_STATE)
 654                         link_state = (wIndex & 0xff00) >> 3;
 655                 if (wValue == USB_PORT_FEAT_REMOTE_WAKE_MASK)
 656                         wake_mask = wIndex & 0xff00;
 657                 wIndex &= 0xff;
 658                 if (!wIndex || wIndex > max_ports)
 659                         goto error;
 660                 wIndex--;
 661                 temp = xhci_readl(xhci, port_array[wIndex]);
 662                 if (temp == 0xffffffff) {
 663                         retval = -ENODEV;
 664                         break;
 665                 }
 666                 temp = xhci_port_state_to_neutral(temp);
 667                 /* FIXME: What new port features do we need to support? */
 668                 switch (wValue) {
 669                 case USB_PORT_FEAT_SUSPEND:
 670                         temp = xhci_readl(xhci, port_array[wIndex]);
 671                         if ((temp & PORT_PLS_MASK) != XDEV_U0) {
 672                                 /* Resume the port to U0 first */
 673                                 xhci_set_link_state(xhci, port_array, wIndex,
 674                                                         XDEV_U0);
 675                                 spin_unlock_irqrestore(&xhci->lock, flags);
 676                                 msleep(10);
 677                                 spin_lock_irqsave(&xhci->lock, flags);
 678                         }
 679                         /* In spec software should not attempt to suspend
 680                          * a port unless the port reports that it is in the
 681                          * enabled (PED = ‘1’,PLS < ‘3’) state.
 682                          */
 683                         temp = xhci_readl(xhci, port_array[wIndex]);
 684                         if ((temp & PORT_PE) == 0 || (temp & PORT_RESET)
 685                                 || (temp & PORT_PLS_MASK) >= XDEV_U3) {
 686                                 xhci_warn(xhci, "USB core suspending device "
 687                                           "not in U0/U1/U2.\n");
 688                                 goto error;
 689                         }
 690
 691                         slot_id = xhci_find_slot_id_by_port(hcd, xhci,
 692                                         wIndex + 1);
 693                         if (!slot_id) {
 694                                 xhci_warn(xhci, "slot_id is zero\n");
 695                                 goto error;
 696                         }
 697                         /* unlock to execute stop endpoint commands */
 698                         spin_unlock_irqrestore(&xhci->lock, flags);
 699                         xhci_stop_device(xhci, slot_id, 1);
 700                         spin_lock_irqsave(&xhci->lock, flags);
 701
 702                         xhci_set_link_state(xhci, port_array, wIndex, XDEV_U3);
 703
 704                         spin_unlock_irqrestore(&xhci->lock, flags);
 705                         msleep(10); /* wait device to enter */
 706                         spin_lock_irqsave(&xhci->lock, flags);
 707
 708                         temp = xhci_readl(xhci, port_array[wIndex]);
 709                         bus_state->suspended_ports |= 1 << wIndex;
 710                         break;
 711                 case USB_PORT_FEAT_LINK_STATE:
 712                         temp = xhci_readl(xhci, port_array[wIndex]);
 713
 714                         /* Disable port */
 715                         if (link_state == USB_SS_PORT_LS_SS_DISABLED) {
 716                                 xhci_dbg(xhci, "Disable port %d\n", wIndex);
 717                                 temp = xhci_port_state_to_neutral(temp);
 718                                 /*
 719                                  * Clear all change bits, so that we get a new
 720                                  * connection event.
 721                                  */
 722                                 temp |= PORT_CSC | PORT_PEC | PORT_WRC |
 723                                         PORT_OCC | PORT_RC | PORT_PLC |
 724                                         PORT_CEC;
 725                                 xhci_writel(xhci, temp | PORT_PE,
 726                                         port_array[wIndex]);
 727                                 temp = xhci_readl(xhci, port_array[wIndex]);
 728                                 break;
 729                         }
 730
 731                         /* Put link in RxDetect (enable port) */
 732                         if (link_state == USB_SS_PORT_LS_RX_DETECT) {
 733                                 xhci_dbg(xhci, "Enable port %d\n", wIndex);
 734                                 xhci_set_link_state(xhci, port_array, wIndex,
 735                                                 link_state);
 736                                 temp = xhci_readl(xhci, port_array[wIndex]);
 737                                 break;
 738                         }
 739
 740                         /* Software should not attempt to set
 741                          * port link state above '3' (U3) and the port
 742                          * must be enabled.
 743                          */
 744                         if ((temp & PORT_PE) == 0 ||
 745                                 (link_state > USB_SS_PORT_LS_U3)) {
 746                                 xhci_warn(xhci, "Cannot set link state.\n");
 747                                 goto error;
 748                         }
 749
 750                         if (link_state == USB_SS_PORT_LS_U3) {
 751                                 slot_id = xhci_find_slot_id_by_port(hcd, xhci,
 752                                                 wIndex + 1);
 753                                 if (slot_id) {
 754                                         /* unlock to execute stop endpoint
 755                                          * commands */
 756                                         spin_unlock_irqrestore(&xhci->lock,
 757                                                                 flags);
 758                                         xhci_stop_device(xhci, slot_id, 1);
 759                                         spin_lock_irqsave(&xhci->lock, flags);
 760                                 }
 761                         }
 762
 763                         xhci_set_link_state(xhci, port_array, wIndex,
 764                                                 link_state);
 765
 766                         spin_unlock_irqrestore(&xhci->lock, flags);
 767                         msleep(20); /* wait device to enter */
 768                         spin_lock_irqsave(&xhci->lock, flags);
 769
 770                         temp = xhci_readl(xhci, port_array[wIndex]);
 771                         if (link_state == USB_SS_PORT_LS_U3)
 772                                 bus_state->suspended_ports |= 1 << wIndex;
 773                         break;
 774                 case USB_PORT_FEAT_POWER:
 775                         /*
 776                          * Turn on ports, even if there isn't per-port switching.
 777                          * HC will report connect events even before this is set.
 778                          * However, khubd will ignore the roothub events until
 779                          * the roothub is registered.
 780                          */
 781                         xhci_writel(xhci, temp | PORT_POWER,
 782                                         port_array[wIndex]);
 783
 784                         temp = xhci_readl(xhci, port_array[wIndex]);
 785                         xhci_dbg(xhci, "set port power, actual port %d status  = 0x%x\n", wIndex, temp);
 786                         break;
 787                 case USB_PORT_FEAT_RESET:
 788                         temp = (temp | PORT_RESET);
 789                         xhci_writel(xhci, temp, port_array[wIndex]);
 790
 791                         temp = xhci_readl(xhci, port_array[wIndex]);
 792                         xhci_dbg(xhci, "set port reset, actual port %d status  = 0x%x\n", wIndex, temp);
 793                         break;
 794                 case USB_PORT_FEAT_REMOTE_WAKE_MASK:
 795                         xhci_set_remote_wake_mask(xhci, port_array,
 796                                         wIndex, wake_mask);
 797                         temp = xhci_readl(xhci, port_array[wIndex]);
 798                         xhci_dbg(xhci, "set port remote wake mask, "
 799                                         "actual port %d status  = 0x%x\n",
 800                                         wIndex, temp);
 801                         break;
 802                 case USB_PORT_FEAT_BH_PORT_RESET:
 803                         temp |= PORT_WR;
 804                         xhci_writel(xhci, temp, port_array[wIndex]);
 805
 806                         temp = xhci_readl(xhci, port_array[wIndex]);
 807                         break;
 808                 default:
 809                         goto error;
 810                 }
 811                 /* unblock any posted writes */
 812                 temp = xhci_readl(xhci, port_array[wIndex]);
 813                 break;
 814         case ClearPortFeature:
 815                 if (!wIndex || wIndex > max_ports)
 816                         goto error;
 817                 wIndex--;
 818                 temp = xhci_readl(xhci, port_array[wIndex]);
 819                 if (temp == 0xffffffff) {
 820                         retval = -ENODEV;
 821                         break;
 822                 }
 823                 /* FIXME: What new port features do we need to support? */
 824                 temp = xhci_port_state_to_neutral(temp);
 825                 switch (wValue) {
 826                 case USB_PORT_FEAT_SUSPEND:
 827                         temp = xhci_readl(xhci, port_array[wIndex]);
 828                         xhci_dbg(xhci, "clear USB_PORT_FEAT_SUSPEND\n");
 829                         xhci_dbg(xhci, "PORTSC %04x\n", temp);
 830                         if (temp & PORT_RESET)
 831                                 goto error;
 832                         if ((temp & PORT_PLS_MASK) == XDEV_U3) {
 833                                 if ((temp & PORT_PE) == 0)
 834                                         goto error;
 835
 836                                 xhci_set_link_state(xhci, port_array, wIndex,
 837                                                         XDEV_RESUME);
 838                                 spin_unlock_irqrestore(&xhci->lock, flags);
 839                                 msleep(20);
 840                                 spin_lock_irqsave(&xhci->lock, flags);
 841                                 xhci_set_link_state(xhci, port_array, wIndex,
 842                                                         XDEV_U0);
 843                         }
 844                         bus_state->port_c_suspend |= 1 << wIndex;
 845
 846                         slot_id = xhci_find_slot_id_by_port(hcd, xhci,
 847                                         wIndex + 1);
 848                         if (!slot_id) {
 849                                 xhci_dbg(xhci, "slot_id is zero\n");
 850                                 goto error;
 851                         }
 852                         xhci_ring_device(xhci, slot_id);
 853                         break;
 854                 case USB_PORT_FEAT_C_SUSPEND:
 855                         bus_state->port_c_suspend &= ~(1 << wIndex);
 856                 case USB_PORT_FEAT_C_RESET:
 857                 case USB_PORT_FEAT_C_BH_PORT_RESET:
 858                 case USB_PORT_FEAT_C_CONNECTION:
 859                 case USB_PORT_FEAT_C_OVER_CURRENT:
 860                 case USB_PORT_FEAT_C_ENABLE:
 861                 case USB_PORT_FEAT_C_PORT_LINK_STATE:
 862                         xhci_clear_port_change_bit(xhci, wValue, wIndex,
 863                                         port_array[wIndex], temp);
 864                         break;
 865                 case USB_PORT_FEAT_ENABLE:
 866                         xhci_disable_port(hcd, xhci, wIndex,
 867                                         port_array[wIndex], temp);
 868                         break;
 869                 default:
 870                         goto error;
 871                 }
 872                 break;
 873         default:
 874 error:
 875                 /* "stall" on error */
 876                 retval = -EPIPE;
 877         }
 878         spin_unlock_irqrestore(&xhci->lock, flags);
 879         return retval;
 880 }
 881
 882 /*
 883  * Returns 0 if the status hasn't changed, or the number of bytes in buf.
 884  * Ports are 0-indexed from the HCD point of view,
 885  * and 1-indexed from the USB core pointer of view.
 886  *
 887  * Note that the status change bits will be cleared as soon as a port status
 888  * change event is generated, so we use the saved status from that event.
 889  */
 890 int xhci_hub_status_data(struct usb_hcd *hcd, char *buf)
 891 {
 892         unsigned long flags;
 893         u32 temp, status;
 894         u32 mask;
 895         int i, retval;
 896         struct xhci_hcd *xhci = hcd_to_xhci(hcd);
 897         int max_ports;
 898         __le32 __iomem **port_array;
 899         struct xhci_bus_state *bus_state;
 900
 901         max_ports = xhci_get_ports(hcd, &port_array);
 902         bus_state = &xhci->bus_state[hcd_index(hcd)];
 903
 904         /* Initial status is no changes */
 905         retval = (max_ports + 8) / 8;
 906         memset(buf, 0, retval);
 907         status = 0;
 908
 909         mask = PORT_CSC | PORT_PEC | PORT_OCC | PORT_PLC | PORT_WRC;
 910
 911         spin_lock_irqsave(&xhci->lock, flags);
 912         /* For each port, did anything change?  If so, set that bit in buf. */
 913         for (i = 0; i < max_ports; i++) {
 914                 temp = xhci_readl(xhci, port_array[i]);
 915                 if (temp == 0xffffffff) {
 916                         retval = -ENODEV;
 917                         break;
 918                 }
 919                 if ((temp & mask) != 0 ||
 920                         (bus_state->port_c_suspend & 1 << i) ||
 921                         (bus_state->resume_done[i] && time_after_eq(
 922                             jiffies, bus_state->resume_done[i]))) {
 923                         buf[(i + 1) / 8] |= 1 << (i + 1) % 8;
 924                         status = 1;
 925                 }
 926         }
 927         spin_unlock_irqrestore(&xhci->lock, flags);
 928         return status ? retval : 0;
 929 }
 930
 931 #ifdef CONFIG_PM
 932
 933 int xhci_bus_suspend(struct usb_hcd *hcd)
 934 {
 935         struct xhci_hcd *xhci = hcd_to_xhci(hcd);
 936         int max_ports, port_index;
 937         __le32 __iomem **port_array;
 938         struct xhci_bus_state *bus_state;
 939         unsigned long flags;
 940
 941         max_ports = xhci_get_ports(hcd, &port_array);
 942         bus_state = &xhci->bus_state[hcd_index(hcd)];
 943
 944         spin_lock_irqsave(&xhci->lock, flags);
 945
 946         if (hcd->self.root_hub->do_remote_wakeup) {
 947                 port_index = max_ports;
 948                 while (port_index--) {
 949                         if (bus_state->resume_done[port_index] != 0) {
 950                                 spin_unlock_irqrestore(&xhci->lock, flags);
 951                                 xhci_dbg(xhci, "suspend failed because "
 952                                                 "port %d is resuming\n",
 953                                                 port_index + 1);
 954                                 return -EBUSY;
 955                         }
 956                 }
 957         }
 958
 959         port_index = max_ports;
 960         bus_state->bus_suspended = 0;
 961         while (port_index--) {
 962                 /* suspend the port if the port is not suspended */
 963                 u32 t1, t2;
 964                 int slot_id;
 965
 966                 t1 = xhci_readl(xhci, port_array[port_index]);
 967                 t2 = xhci_port_state_to_neutral(t1);
 968
 969                 if ((t1 & PORT_PE) && !(t1 & PORT_PLS_MASK)) {
 970                         xhci_dbg(xhci, "port %d not suspended\n", port_index);
 971                         slot_id = xhci_find_slot_id_by_port(hcd, xhci,
 972                                         port_index + 1);
 973                         if (slot_id) {
 974                                 spin_unlock_irqrestore(&xhci->lock, flags);
 975                                 xhci_stop_device(xhci, slot_id, 1);
 976                                 spin_lock_irqsave(&xhci->lock, flags);
 977                         }
 978                         t2 &= ~PORT_PLS_MASK;
 979                         t2 |= PORT_LINK_STROBE | XDEV_U3;
 980                         set_bit(port_index, &bus_state->bus_suspended);
 981                 }
 982                 /* USB core sets remote wake mask for USB 3.0 hubs,
 983                  * including the USB 3.0 roothub, but only if CONFIG_USB_SUSPEND
 984                  * is enabled, so also enable remote wake here.
 985                  */
 986                 if (hcd->self.root_hub->do_remote_wakeup) {
 987                         if (t1 & PORT_CONNECT) {
 988                                 t2 |= PORT_WKOC_E | PORT_WKDISC_E;
 989                                 t2 &= ~PORT_WKCONN_E;
 990                         } else {
 991                                 t2 |= PORT_WKOC_E | PORT_WKCONN_E;
 992                                 t2 &= ~PORT_WKDISC_E;
 993                         }
 994                 } else
 995                         t2 &= ~PORT_WAKE_BITS;
 996
 997                 t1 = xhci_port_state_to_neutral(t1);
 998                 if (t1 != t2)
 999                         xhci_writel(xhci, t2, port_array[port_index]);
1000
1001                 if (hcd->speed != HCD_USB3) {
1002                         /* enable remote wake up for USB 2.0 */
1003                         __le32 __iomem *addr;
1004                         u32 tmp;
1005
1006                         /* Add one to the port status register address to get
1007                          * the port power control register address.
1008                          */
1009                         addr = port_array[port_index] + 1;
1010                         tmp = xhci_readl(xhci, addr);
1011                         tmp |= PORT_RWE;
1012                         xhci_writel(xhci, tmp, addr);
1013                 }
1014         }
1015         hcd->state = HC_STATE_SUSPENDED;
1016         bus_state->next_statechange = jiffies + msecs_to_jiffies(10);
1017         spin_unlock_irqrestore(&xhci->lock, flags);
1018         return 0;
1019 }
1020
1021 int xhci_bus_resume(struct usb_hcd *hcd)
1022 {
1023         struct xhci_hcd *xhci = hcd_to_xhci(hcd);
1024         int max_ports, port_index;
1025         __le32 __iomem **port_array;
1026         struct xhci_bus_state *bus_state;
1027         u32 temp;
1028         unsigned long flags;
1029
1030         max_ports = xhci_get_ports(hcd, &port_array);
1031         bus_state = &xhci->bus_state[hcd_index(hcd)];
1032
1033         if (time_before(jiffies, bus_state->next_statechange))
1034                 msleep(5);
1035
1036         spin_lock_irqsave(&xhci->lock, flags);
1037         if (!HCD_HW_ACCESSIBLE(hcd)) {
1038                 spin_unlock_irqrestore(&xhci->lock, flags);
1039                 return -ESHUTDOWN;
1040         }
1041
1042         /* delay the irqs */
1043         temp = xhci_readl(xhci, &xhci->op_regs->command);
1044         temp &= ~CMD_EIE;
1045         xhci_writel(xhci, temp, &xhci->op_regs->command);
1046
1047         port_index = max_ports;
1048         while (port_index--) {
1049                 /* Check whether need resume ports. If needed
1050                    resume port and disable remote wakeup */
1051                 u32 temp;
1052                 int slot_id;
1053
1054                 temp = xhci_readl(xhci, port_array[port_index]);
1055                 if (DEV_SUPERSPEED(temp))
1056                         temp &= ~(PORT_RWC_BITS | PORT_CEC | PORT_WAKE_BITS);
1057                 else
1058                         temp &= ~(PORT_RWC_BITS | PORT_WAKE_BITS);
1059                 if (test_bit(port_index, &bus_state->bus_suspended) &&
1060                     (temp & PORT_PLS_MASK)) {
1061                         if (DEV_SUPERSPEED(temp)) {
1062                                 xhci_set_link_state(xhci, port_array,
1063                                                         port_index, XDEV_U0);
1064                         } else {
1065                                 xhci_set_link_state(xhci, port_array,
1066                                                 port_index, XDEV_RESUME);
1067
1068                                 spin_unlock_irqrestore(&xhci->lock, flags);
1069                                 msleep(20);
1070                                 spin_lock_irqsave(&xhci->lock, flags);
1071
1072                                 xhci_set_link_state(xhci, port_array,
1073                                                         port_index, XDEV_U0);
1074                         }
1075                         /* wait for the port to enter U0 and report port link
1076                          * state change.
1077                          */
1078                         spin_unlock_irqrestore(&xhci->lock, flags);
1079                         msleep(20);
1080                         spin_lock_irqsave(&xhci->lock, flags);
1081
1082                         /* Clear PLC */
1083                         xhci_test_and_clear_bit(xhci, port_array, port_index,
1084                                                 PORT_PLC);
1085
1086                         slot_id = xhci_find_slot_id_by_port(hcd,
1087                                         xhci, port_index + 1);
1088                         if (slot_id)
1089                                 xhci_ring_device(xhci, slot_id);
1090                 } else
1091                         xhci_writel(xhci, temp, port_array[port_index]);
1092
1093                 if (hcd->speed != HCD_USB3) {
1094                         /* disable remote wake up for USB 2.0 */
1095                         __le32 __iomem *addr;
1096                         u32 tmp;
1097
1098                         /* Add one to the port status register address to get
1099                          * the port power control register address.
1100                          */
1101                         addr = port_array[port_index] + 1;
1102                         tmp = xhci_readl(xhci, addr);
1103                         tmp &= ~PORT_RWE;
1104                         xhci_writel(xhci, tmp, addr);
1105                 }
1106         }
1107
1108         (void) xhci_readl(xhci, &xhci->op_regs->command);
1109
1110         bus_state->next_statechange = jiffies + msecs_to_jiffies(5);
1111         /* re-enable irqs */
1112         temp = xhci_readl(xhci, &xhci->op_regs->command);
1113         temp |= CMD_EIE;
1114         xhci_writel(xhci, temp, &xhci->op_regs->command);
1115         temp = xhci_readl(xhci, &xhci->op_regs->command);
1116
1117         spin_unlock_irqrestore(&xhci->lock, flags);
1118         return 0;
1119 }
1120
1121 #endif  /* CONFIG_PM */