drivers/usb/phy/phy-fsl-usb.c

   1 /*
   2  * Copyright (C) 2007,2008 Freescale semiconductor, Inc.
   3  *
   4  * Author: Li Yang <LeoLi@freescale.com>
   5  *         Jerry Huang <Chang-Ming.Huang@freescale.com>
   6  *
   7  * Initialization based on code from Shlomi Gridish.
   8  *
   9  * This program is free software; you can redistribute  it and/or modify it
  10  * under  the terms of  the GNU General  Public License as published by the
  11  * Free Software Foundation;  either version 2 of the  License, or (at your
  12  * option) any later version.
  13  *
  14  * This program is distributed in the hope that it will be useful, but
  15  * WITHOUT ANY WARRANTY; without even the implied warranty of
  16  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
  17  * General Public License for more details.
  18  *
  19  * You should have received a copy of the  GNU General Public License along
  20  * with this program; if not, write  to the Free Software Foundation, Inc.,
  21  * 675 Mass Ave, Cambridge, MA 02139, USA.
  22  */
  23
  24 #include <linux/module.h>
  25 #include <linux/kernel.h>
  26 #include <linux/delay.h>
  27 #include <linux/slab.h>
  28 #include <linux/proc_fs.h>
  29 #include <linux/errno.h>
  30 #include <linux/interrupt.h>
  31 #include <linux/io.h>
  32 #include <linux/timer.h>
  33 #include <linux/usb.h>
  34 #include <linux/device.h>
  35 #include <linux/usb/ch9.h>
  36 #include <linux/usb/gadget.h>
  37 #include <linux/workqueue.h>
  38 #include <linux/time.h>
  39 #include <linux/fsl_devices.h>
  40 #include <linux/platform_device.h>
  41 #include <linux/uaccess.h>
  42
  43 #include <asm/unaligned.h>
  44
  45 #include "phy-fsl-usb.h"
  46
  47 #define DRIVER_VERSION "Rev. 1.55"
  48 #define DRIVER_AUTHOR "Jerry Huang/Li Yang"
  49 #define DRIVER_DESC "Freescale USB OTG Transceiver Driver"
  50 #define DRIVER_INFO DRIVER_DESC " " DRIVER_VERSION
  51
  52 static const char driver_name[] = "fsl-usb2-otg";
  53
  54 const pm_message_t otg_suspend_state = {
  55         .event = 1,
  56 };
  57
  58 #define HA_DATA_PULSE
  59
  60 static struct usb_dr_mmap *usb_dr_regs;
  61 static struct fsl_otg *fsl_otg_dev;
  62 static int srp_wait_done;
  63
  64 /* FSM timers */
  65 struct fsl_otg_timer *a_wait_vrise_tmr, *a_wait_bcon_tmr, *a_aidl_bdis_tmr,
  66         *b_ase0_brst_tmr, *b_se0_srp_tmr;
  67
  68 /* Driver specific timers */
  69 struct fsl_otg_timer *b_data_pulse_tmr, *b_vbus_pulse_tmr, *b_srp_fail_tmr,
  70         *b_srp_wait_tmr, *a_wait_enum_tmr;
  71
  72 static struct list_head active_timers;
  73
  74 static struct fsl_otg_config fsl_otg_initdata = {
  75         .otg_port = 1,
  76 };
  77
  78 #ifdef CONFIG_PPC32
  79 static u32 _fsl_readl_be(const unsigned __iomem *p)
  80 {
  81         return in_be32(p);
  82 }
  83
  84 static u32 _fsl_readl_le(const unsigned __iomem *p)
  85 {
  86         return in_le32(p);
  87 }
  88
  89 static void _fsl_writel_be(u32 v, unsigned __iomem *p)
  90 {
  91         out_be32(p, v);
  92 }
  93
  94 static void _fsl_writel_le(u32 v, unsigned __iomem *p)
  95 {
  96         out_le32(p, v);
  97 }
  98
  99 static u32 (*_fsl_readl)(const unsigned __iomem *p);
 100 static void (*_fsl_writel)(u32 v, unsigned __iomem *p);
 101
 102 #define fsl_readl(p)            (*_fsl_readl)((p))
 103 #define fsl_writel(v, p)        (*_fsl_writel)((v), (p))
 104
 105 #else
 106 #define fsl_readl(addr)         readl(addr)
 107 #define fsl_writel(val, addr)   writel(val, addr)
 108 #endif /* CONFIG_PPC32 */
 109
 110 /* Routines to access transceiver ULPI registers */
 111 u8 view_ulpi(u8 addr)
 112 {
 113         u32 temp;
 114
 115         temp = 0x40000000 | (addr << 16);
 116         fsl_writel(temp, &usb_dr_regs->ulpiview);
 117         udelay(1000);
 118         while (temp & 0x40)
 119                 temp = fsl_readl(&usb_dr_regs->ulpiview);
 120         return (le32_to_cpu(temp) & 0x0000ff00) >> 8;
 121 }
 122
 123 int write_ulpi(u8 addr, u8 data)
 124 {
 125         u32 temp;
 126
 127         temp = 0x60000000 | (addr << 16) | data;
 128         fsl_writel(temp, &usb_dr_regs->ulpiview);
 129         return 0;
 130 }
 131
 132 /* -------------------------------------------------------------*/
 133 /* Operations that will be called from OTG Finite State Machine */
 134
 135 /* Charge vbus for vbus pulsing in SRP */
 136 void fsl_otg_chrg_vbus(struct otg_fsm *fsm, int on)
 137 {
 138         u32 tmp;
 139
 140         tmp = fsl_readl(&usb_dr_regs->otgsc) & ~OTGSC_INTSTS_MASK;
 141
 142         if (on)
 143                 /* stop discharging, start charging */
 144                 tmp = (tmp & ~OTGSC_CTRL_VBUS_DISCHARGE) |
 145                         OTGSC_CTRL_VBUS_CHARGE;
 146         else
 147                 /* stop charging */
 148                 tmp &= ~OTGSC_CTRL_VBUS_CHARGE;
 149
 150         fsl_writel(tmp, &usb_dr_regs->otgsc);
 151 }
 152
 153 /* Discharge vbus through a resistor to ground */
 154 void fsl_otg_dischrg_vbus(int on)
 155 {
 156         u32 tmp;
 157
 158         tmp = fsl_readl(&usb_dr_regs->otgsc) & ~OTGSC_INTSTS_MASK;
 159
 160         if (on)
 161                 /* stop charging, start discharging */
 162                 tmp = (tmp & ~OTGSC_CTRL_VBUS_CHARGE) |
 163                         OTGSC_CTRL_VBUS_DISCHARGE;
 164         else
 165                 /* stop discharging */
 166                 tmp &= ~OTGSC_CTRL_VBUS_DISCHARGE;
 167
 168         fsl_writel(tmp, &usb_dr_regs->otgsc);
 169 }
 170
 171 /* A-device driver vbus, controlled through PP bit in PORTSC */
 172 void fsl_otg_drv_vbus(struct otg_fsm *fsm, int on)
 173 {
 174         u32 tmp;
 175
 176         if (on) {
 177                 tmp = fsl_readl(&usb_dr_regs->portsc) & ~PORTSC_W1C_BITS;
 178                 fsl_writel(tmp | PORTSC_PORT_POWER, &usb_dr_regs->portsc);
 179         } else {
 180                 tmp = fsl_readl(&usb_dr_regs->portsc) &
 181                       ~PORTSC_W1C_BITS & ~PORTSC_PORT_POWER;
 182                 fsl_writel(tmp, &usb_dr_regs->portsc);
 183         }
 184 }
 185
 186 /*
 187  * Pull-up D+, signalling connect by periperal. Also used in
 188  * data-line pulsing in SRP
 189  */
 190 void fsl_otg_loc_conn(struct otg_fsm *fsm, int on)
 191 {
 192         u32 tmp;
 193
 194         tmp = fsl_readl(&usb_dr_regs->otgsc) & ~OTGSC_INTSTS_MASK;
 195
 196         if (on)
 197                 tmp |= OTGSC_CTRL_DATA_PULSING;
 198         else
 199                 tmp &= ~OTGSC_CTRL_DATA_PULSING;
 200
 201         fsl_writel(tmp, &usb_dr_regs->otgsc);
 202 }
 203
 204 /*
 205  * Generate SOF by host.  This is controlled through suspend/resume the
 206  * port.  In host mode, controller will automatically send SOF.
 207  * Suspend will block the data on the port.
 208  */
 209 void fsl_otg_loc_sof(struct otg_fsm *fsm, int on)
 210 {
 211         u32 tmp;
 212
 213         tmp = fsl_readl(&fsl_otg_dev->dr_mem_map->portsc) & ~PORTSC_W1C_BITS;
 214         if (on)
 215                 tmp |= PORTSC_PORT_FORCE_RESUME;
 216         else
 217                 tmp |= PORTSC_PORT_SUSPEND;
 218
 219         fsl_writel(tmp, &fsl_otg_dev->dr_mem_map->portsc);
 220
 221 }
 222
 223 /* Start SRP pulsing by data-line pulsing, followed with v-bus pulsing. */
 224 void fsl_otg_start_pulse(struct otg_fsm *fsm)
 225 {
 226         u32 tmp;
 227
 228         srp_wait_done = 0;
 229 #ifdef HA_DATA_PULSE
 230         tmp = fsl_readl(&usb_dr_regs->otgsc) & ~OTGSC_INTSTS_MASK;
 231         tmp |= OTGSC_HA_DATA_PULSE;
 232         fsl_writel(tmp, &usb_dr_regs->otgsc);
 233 #else
 234         fsl_otg_loc_conn(1);
 235 #endif
 236
 237         fsl_otg_add_timer(fsm, b_data_pulse_tmr);
 238 }
 239
 240 void b_data_pulse_end(unsigned long foo)
 241 {
 242 #ifdef HA_DATA_PULSE
 243 #else
 244         fsl_otg_loc_conn(0);
 245 #endif
 246
 247         /* Do VBUS pulse after data pulse */
 248         fsl_otg_pulse_vbus();
 249 }
 250
 251 void fsl_otg_pulse_vbus(void)
 252 {
 253         srp_wait_done = 0;
 254         fsl_otg_chrg_vbus(&fsl_otg_dev->fsm, 1);
 255         /* start the timer to end vbus charge */
 256         fsl_otg_add_timer(&fsl_otg_dev->fsm, b_vbus_pulse_tmr);
 257 }
 258
 259 void b_vbus_pulse_end(unsigned long foo)
 260 {
 261         fsl_otg_chrg_vbus(&fsl_otg_dev->fsm, 0);
 262
 263         /*
 264          * As USB3300 using the same a_sess_vld and b_sess_vld voltage
 265          * we need to discharge the bus for a while to distinguish
 266          * residual voltage of vbus pulsing and A device pull up
 267          */
 268         fsl_otg_dischrg_vbus(1);
 269         fsl_otg_add_timer(&fsl_otg_dev->fsm, b_srp_wait_tmr);
 270 }
 271
 272 void b_srp_end(unsigned long foo)
 273 {
 274         fsl_otg_dischrg_vbus(0);
 275         srp_wait_done = 1;
 276
 277         if ((fsl_otg_dev->phy.state == OTG_STATE_B_SRP_INIT) &&
 278             fsl_otg_dev->fsm.b_sess_vld)
 279                 fsl_otg_dev->fsm.b_srp_done = 1;
 280 }
 281
 282 /*
 283  * Workaround for a_host suspending too fast.  When a_bus_req=0,
 284  * a_host will start by SRP.  It needs to set b_hnp_enable before
 285  * actually suspending to start HNP
 286  */
 287 void a_wait_enum(unsigned long foo)
 288 {
 289         VDBG("a_wait_enum timeout\n");
 290         if (!fsl_otg_dev->phy.otg->host->b_hnp_enable)
 291                 fsl_otg_add_timer(&fsl_otg_dev->fsm, a_wait_enum_tmr);
 292         else
 293                 otg_statemachine(&fsl_otg_dev->fsm);
 294 }
 295
 296 /* The timeout callback function to set time out bit */
 297 void set_tmout(unsigned long indicator)
 298 {
 299         *(int *)indicator = 1;
 300 }
 301
 302 /* Initialize timers */
 303 int fsl_otg_init_timers(struct otg_fsm *fsm)
 304 {
 305         /* FSM used timers */
 306         a_wait_vrise_tmr = otg_timer_initializer(&set_tmout, TA_WAIT_VRISE,
 307                                 (unsigned long)&fsm->a_wait_vrise_tmout);
 308         if (!a_wait_vrise_tmr)
 309                 return -ENOMEM;
 310
 311         a_wait_bcon_tmr = otg_timer_initializer(&set_tmout, TA_WAIT_BCON,
 312                                 (unsigned long)&fsm->a_wait_bcon_tmout);
 313         if (!a_wait_bcon_tmr)
 314                 return -ENOMEM;
 315
 316         a_aidl_bdis_tmr = otg_timer_initializer(&set_tmout, TA_AIDL_BDIS,
 317                                 (unsigned long)&fsm->a_aidl_bdis_tmout);
 318         if (!a_aidl_bdis_tmr)
 319                 return -ENOMEM;
 320
 321         b_ase0_brst_tmr = otg_timer_initializer(&set_tmout, TB_ASE0_BRST,
 322                                 (unsigned long)&fsm->b_ase0_brst_tmout);
 323         if (!b_ase0_brst_tmr)
 324                 return -ENOMEM;
 325
 326         b_se0_srp_tmr = otg_timer_initializer(&set_tmout, TB_SE0_SRP,
 327                                 (unsigned long)&fsm->b_se0_srp);
 328         if (!b_se0_srp_tmr)
 329                 return -ENOMEM;
 330
 331         b_srp_fail_tmr = otg_timer_initializer(&set_tmout, TB_SRP_FAIL,
 332                                 (unsigned long)&fsm->b_srp_done);
 333         if (!b_srp_fail_tmr)
 334                 return -ENOMEM;
 335
 336         a_wait_enum_tmr = otg_timer_initializer(&a_wait_enum, 10,
 337                                 (unsigned long)&fsm);
 338         if (!a_wait_enum_tmr)
 339                 return -ENOMEM;
 340
 341         /* device driver used timers */
 342         b_srp_wait_tmr = otg_timer_initializer(&b_srp_end, TB_SRP_WAIT, 0);
 343         if (!b_srp_wait_tmr)
 344                 return -ENOMEM;
 345
 346         b_data_pulse_tmr = otg_timer_initializer(&b_data_pulse_end,
 347                                 TB_DATA_PLS, 0);
 348         if (!b_data_pulse_tmr)
 349                 return -ENOMEM;
 350
 351         b_vbus_pulse_tmr = otg_timer_initializer(&b_vbus_pulse_end,
 352                                 TB_VBUS_PLS, 0);
 353         if (!b_vbus_pulse_tmr)
 354                 return -ENOMEM;
 355
 356         return 0;
 357 }
 358
 359 /* Uninitialize timers */
 360 void fsl_otg_uninit_timers(void)
 361 {
 362         /* FSM used timers */
 363         kfree(a_wait_vrise_tmr);
 364         kfree(a_wait_bcon_tmr);
 365         kfree(a_aidl_bdis_tmr);
 366         kfree(b_ase0_brst_tmr);
 367         kfree(b_se0_srp_tmr);
 368         kfree(b_srp_fail_tmr);
 369         kfree(a_wait_enum_tmr);
 370
 371         /* device driver used timers */
 372         kfree(b_srp_wait_tmr);
 373         kfree(b_data_pulse_tmr);
 374         kfree(b_vbus_pulse_tmr);
 375 }
 376
 377 static struct fsl_otg_timer *fsl_otg_get_timer(enum otg_fsm_timer t)
 378 {
 379         struct fsl_otg_timer *timer;
 380
 381         /* REVISIT: use array of pointers to timers instead */
 382         switch (t) {
 383         case A_WAIT_VRISE:
 384                 timer = a_wait_vrise_tmr;
 385                 break;
 386         case A_WAIT_BCON:
 387                 timer = a_wait_vrise_tmr;
 388                 break;
 389         case A_AIDL_BDIS:
 390                 timer = a_wait_vrise_tmr;
 391                 break;
 392         case B_ASE0_BRST:
 393                 timer = a_wait_vrise_tmr;
 394                 break;
 395         case B_SE0_SRP:
 396                 timer = a_wait_vrise_tmr;
 397                 break;
 398         case B_SRP_FAIL:
 399                 timer = a_wait_vrise_tmr;
 400                 break;
 401         case A_WAIT_ENUM:
 402                 timer = a_wait_vrise_tmr;
 403                 break;
 404         default:
 405                 timer = NULL;
 406         }
 407
 408         return timer;
 409 }
 410
 411 /* Add timer to timer list */
 412 void fsl_otg_add_timer(struct otg_fsm *fsm, void *gtimer)
 413 {
 414         struct fsl_otg_timer *timer = gtimer;
 415         struct fsl_otg_timer *tmp_timer;
 416
 417         /*
 418          * Check if the timer is already in the active list,
 419          * if so update timer count
 420          */
 421         list_for_each_entry(tmp_timer, &active_timers, list)
 422             if (tmp_timer == timer) {
 423                 timer->count = timer->expires;
 424                 return;
 425         }
 426         timer->count = timer->expires;
 427         list_add_tail(&timer->list, &active_timers);
 428 }
 429
 430 static void fsl_otg_fsm_add_timer(struct otg_fsm *fsm, enum otg_fsm_timer t)
 431 {
 432         struct fsl_otg_timer *timer;
 433
 434         timer = fsl_otg_get_timer(t);
 435         if (!timer)
 436                 return;
 437
 438         fsl_otg_add_timer(fsm, timer);
 439 }
 440
 441 /* Remove timer from the timer list; clear timeout status */
 442 void fsl_otg_del_timer(struct otg_fsm *fsm, void *gtimer)
 443 {
 444         struct fsl_otg_timer *timer = gtimer;
 445         struct fsl_otg_timer *tmp_timer, *del_tmp;
 446
 447         list_for_each_entry_safe(tmp_timer, del_tmp, &active_timers, list)
 448                 if (tmp_timer == timer)
 449                         list_del(&timer->list);
 450 }
 451
 452 static void fsl_otg_fsm_del_timer(struct otg_fsm *fsm, enum otg_fsm_timer t)
 453 {
 454         struct fsl_otg_timer *timer;
 455
 456         timer = fsl_otg_get_timer(t);
 457         if (!timer)
 458                 return;
 459
 460         fsl_otg_del_timer(fsm, timer);
 461 }
 462
 463 /*
 464  * Reduce timer count by 1, and find timeout conditions.
 465  * Called by fsl_otg 1ms timer interrupt
 466  */
 467 int fsl_otg_tick_timer(void)
 468 {
 469         struct fsl_otg_timer *tmp_timer, *del_tmp;
 470         int expired = 0;
 471
 472         list_for_each_entry_safe(tmp_timer, del_tmp, &active_timers, list) {
 473                 tmp_timer->count--;
 474                 /* check if timer expires */
 475                 if (!tmp_timer->count) {
 476                         list_del(&tmp_timer->list);
 477                         tmp_timer->function(tmp_timer->data);
 478                         expired = 1;
 479                 }
 480         }
 481
 482         return expired;
 483 }
 484
 485 /* Reset controller, not reset the bus */
 486 void otg_reset_controller(void)
 487 {
 488         u32 command;
 489
 490         command = fsl_readl(&usb_dr_regs->usbcmd);
 491         command |= (1 << 1);
 492         fsl_writel(command, &usb_dr_regs->usbcmd);
 493         while (fsl_readl(&usb_dr_regs->usbcmd) & (1 << 1))
 494                 ;
 495 }
 496
 497 /* Call suspend/resume routines in host driver */
 498 int fsl_otg_start_host(struct otg_fsm *fsm, int on)
 499 {
 500         struct usb_otg *otg = fsm->otg;
 501         struct device *dev;
 502         struct fsl_otg *otg_dev = container_of(otg->phy, struct fsl_otg, phy);
 503         u32 retval = 0;
 504
 505         if (!otg->host)
 506                 return -ENODEV;
 507         dev = otg->host->controller;
 508
 509         /*
 510          * Update a_vbus_vld state as a_vbus_vld int is disabled
 511          * in device mode
 512          */
 513         fsm->a_vbus_vld =
 514                 !!(fsl_readl(&usb_dr_regs->otgsc) & OTGSC_STS_A_VBUS_VALID);
 515         if (on) {
 516                 /* start fsl usb host controller */
 517                 if (otg_dev->host_working)
 518                         goto end;
 519                 else {
 520                         otg_reset_controller();
 521                         VDBG("host on......\n");
 522                         if (dev->driver->pm && dev->driver->pm->resume) {
 523                                 retval = dev->driver->pm->resume(dev);
 524                                 if (fsm->id) {
 525                                         /* default-b */
 526                                         fsl_otg_drv_vbus(fsm, 1);
 527                                         /*
 528                                          * Workaround: b_host can't driver
 529                                          * vbus, but PP in PORTSC needs to
 530                                          * be 1 for host to work.
 531                                          * So we set drv_vbus bit in
 532                                          * transceiver to 0 thru ULPI.
 533                                          */
 534                                         write_ulpi(0x0c, 0x20);
 535                                 }
 536                         }
 537
 538                         otg_dev->host_working = 1;
 539                 }
 540         } else {
 541                 /* stop fsl usb host controller */
 542                 if (!otg_dev->host_working)
 543                         goto end;
 544                 else {
 545                         VDBG("host off......\n");
 546                         if (dev && dev->driver) {
 547                                 if (dev->driver->pm && dev->driver->pm->suspend)
 548                                         retval = dev->driver->pm->suspend(dev);
 549                                 if (fsm->id)
 550                                         /* default-b */
 551                                         fsl_otg_drv_vbus(fsm, 0);
 552                         }
 553                         otg_dev->host_working = 0;
 554                 }
 555         }
 556 end:
 557         return retval;
 558 }
 559
 560 /*
 561  * Call suspend and resume function in udc driver
 562  * to stop and start udc driver.
 563  */
 564 int fsl_otg_start_gadget(struct otg_fsm *fsm, int on)
 565 {
 566         struct usb_otg *otg = fsm->otg;
 567         struct device *dev;
 568
 569         if (!otg->gadget || !otg->gadget->dev.parent)
 570                 return -ENODEV;
 571
 572         VDBG("gadget %s\n", on ? "on" : "off");
 573         dev = otg->gadget->dev.parent;
 574
 575         if (on) {
 576                 if (dev->driver->resume)
 577                         dev->driver->resume(dev);
 578         } else {
 579                 if (dev->driver->suspend)
 580                         dev->driver->suspend(dev, otg_suspend_state);
 581         }
 582
 583         return 0;
 584 }
 585
 586 /*
 587  * Called by initialization code of host driver.  Register host controller
 588  * to the OTG.  Suspend host for OTG role detection.
 589  */
 590 static int fsl_otg_set_host(struct usb_otg *otg, struct usb_bus *host)
 591 {
 592         struct fsl_otg *otg_dev;
 593
 594         if (!otg)
 595                 return -ENODEV;
 596
 597         otg_dev = container_of(otg->phy, struct fsl_otg, phy);
 598         if (otg_dev != fsl_otg_dev)
 599                 return -ENODEV;
 600
 601         otg->host = host;
 602
 603         otg_dev->fsm.a_bus_drop = 0;
 604         otg_dev->fsm.a_bus_req = 1;
 605
 606         if (host) {
 607                 VDBG("host off......\n");
 608
 609                 otg->host->otg_port = fsl_otg_initdata.otg_port;
 610                 otg->host->is_b_host = otg_dev->fsm.id;
 611                 /*
 612                  * must leave time for khubd to finish its thing
 613                  * before yanking the host driver out from under it,
 614                  * so suspend the host after a short delay.
 615                  */
 616                 otg_dev->host_working = 1;
 617                 schedule_delayed_work(&otg_dev->otg_event, 100);
 618                 return 0;
 619         } else {
 620                 /* host driver going away */
 621                 if (!(fsl_readl(&otg_dev->dr_mem_map->otgsc) &
 622                       OTGSC_STS_USB_ID)) {
 623                         /* Mini-A cable connected */
 624                         struct otg_fsm *fsm = &otg_dev->fsm;
 625
 626                         otg->phy->state = OTG_STATE_UNDEFINED;
 627                         fsm->protocol = PROTO_UNDEF;
 628                 }
 629         }
 630
 631         otg_dev->host_working = 0;
 632
 633         otg_statemachine(&otg_dev->fsm);
 634
 635         return 0;
 636 }
 637
 638 /* Called by initialization code of udc.  Register udc to OTG. */
 639 static int fsl_otg_set_peripheral(struct usb_otg *otg,
 640                                         struct usb_gadget *gadget)
 641 {
 642         struct fsl_otg *otg_dev;
 643
 644         if (!otg)
 645                 return -ENODEV;
 646
 647         otg_dev = container_of(otg->phy, struct fsl_otg, phy);
 648         VDBG("otg_dev 0x%x\n", (int)otg_dev);
 649         VDBG("fsl_otg_dev 0x%x\n", (int)fsl_otg_dev);
 650         if (otg_dev != fsl_otg_dev)
 651                 return -ENODEV;
 652
 653         if (!gadget) {
 654                 if (!otg->default_a)
 655                         otg->gadget->ops->vbus_draw(otg->gadget, 0);
 656                 usb_gadget_vbus_disconnect(otg->gadget);
 657                 otg->gadget = 0;
 658                 otg_dev->fsm.b_bus_req = 0;
 659                 otg_statemachine(&otg_dev->fsm);
 660                 return 0;
 661         }
 662
 663         otg->gadget = gadget;
 664         otg->gadget->is_a_peripheral = !otg_dev->fsm.id;
 665
 666         otg_dev->fsm.b_bus_req = 1;
 667
 668         /* start the gadget right away if the ID pin says Mini-B */
 669         pr_debug("ID pin=%d\n", otg_dev->fsm.id);
 670         if (otg_dev->fsm.id == 1) {
 671                 fsl_otg_start_host(&otg_dev->fsm, 0);
 672                 otg_drv_vbus(&otg_dev->fsm, 0);
 673                 fsl_otg_start_gadget(&otg_dev->fsm, 1);
 674         }
 675
 676         return 0;
 677 }
 678
 679 /* Set OTG port power, only for B-device */
 680 static int fsl_otg_set_power(struct usb_phy *phy, unsigned mA)
 681 {
 682         if (!fsl_otg_dev)
 683                 return -ENODEV;
 684         if (phy->state == OTG_STATE_B_PERIPHERAL)
 685                 pr_info("FSL OTG: Draw %d mA\n", mA);
 686
 687         return 0;
 688 }
 689
 690 /*
 691  * Delayed pin detect interrupt processing.
 692  *
 693  * When the Mini-A cable is disconnected from the board,
 694  * the pin-detect interrupt happens before the disconnect
 695  * interrupts for the connected device(s).  In order to
 696  * process the disconnect interrupt(s) prior to switching
 697  * roles, the pin-detect interrupts are delayed, and handled
 698  * by this routine.
 699  */
 700 static void fsl_otg_event(struct work_struct *work)
 701 {
 702         struct fsl_otg *og = container_of(work, struct fsl_otg, otg_event.work);
 703         struct otg_fsm *fsm = &og->fsm;
 704
 705         if (fsm->id) {          /* switch to gadget */
 706                 fsl_otg_start_host(fsm, 0);
 707                 otg_drv_vbus(fsm, 0);
 708                 fsl_otg_start_gadget(fsm, 1);
 709         }
 710 }
 711
 712 /* B-device start SRP */
 713 static int fsl_otg_start_srp(struct usb_otg *otg)
 714 {
 715         struct fsl_otg *otg_dev;
 716
 717         if (!otg || otg->phy->state != OTG_STATE_B_IDLE)
 718                 return -ENODEV;
 719
 720         otg_dev = container_of(otg->phy, struct fsl_otg, phy);
 721         if (otg_dev != fsl_otg_dev)
 722                 return -ENODEV;
 723
 724         otg_dev->fsm.b_bus_req = 1;
 725         otg_statemachine(&otg_dev->fsm);
 726
 727         return 0;
 728 }
 729
 730 /* A_host suspend will call this function to start hnp */
 731 static int fsl_otg_start_hnp(struct usb_otg *otg)
 732 {
 733         struct fsl_otg *otg_dev;
 734
 735         if (!otg)
 736                 return -ENODEV;
 737
 738         otg_dev = container_of(otg->phy, struct fsl_otg, phy);
 739         if (otg_dev != fsl_otg_dev)
 740                 return -ENODEV;
 741
 742         pr_debug("start_hnp...\n");
 743
 744         /* clear a_bus_req to enter a_suspend state */
 745         otg_dev->fsm.a_bus_req = 0;
 746         otg_statemachine(&otg_dev->fsm);
 747
 748         return 0;
 749 }
 750
 751 /*
 752  * Interrupt handler.  OTG/host/peripheral share the same int line.
 753  * OTG driver clears OTGSC interrupts and leaves USB interrupts
 754  * intact.  It needs to have knowledge of some USB interrupts
 755  * such as port change.
 756  */
 757 irqreturn_t fsl_otg_isr(int irq, void *dev_id)
 758 {
 759         struct otg_fsm *fsm = &((struct fsl_otg *)dev_id)->fsm;
 760         struct usb_otg *otg = ((struct fsl_otg *)dev_id)->phy.otg;
 761         u32 otg_int_src, otg_sc;
 762
 763         otg_sc = fsl_readl(&usb_dr_regs->otgsc);
 764         otg_int_src = otg_sc & OTGSC_INTSTS_MASK & (otg_sc >> 8);
 765
 766         /* Only clear otg interrupts */
 767         fsl_writel(otg_sc, &usb_dr_regs->otgsc);
 768
 769         /*FIXME: ID change not generate when init to 0 */
 770         fsm->id = (otg_sc & OTGSC_STS_USB_ID) ? 1 : 0;
 771         otg->default_a = (fsm->id == 0);
 772
 773         /* process OTG interrupts */
 774         if (otg_int_src) {
 775                 if (otg_int_src & OTGSC_INTSTS_USB_ID) {
 776                         fsm->id = (otg_sc & OTGSC_STS_USB_ID) ? 1 : 0;
 777                         otg->default_a = (fsm->id == 0);
 778                         /* clear conn information */
 779                         if (fsm->id)
 780                                 fsm->b_conn = 0;
 781                         else
 782                                 fsm->a_conn = 0;
 783
 784                         if (otg->host)
 785                                 otg->host->is_b_host = fsm->id;
 786                         if (otg->gadget)
 787                                 otg->gadget->is_a_peripheral = !fsm->id;
 788                         VDBG("ID int (ID is %d)\n", fsm->id);
 789
 790                         if (fsm->id) {  /* switch to gadget */
 791                                 schedule_delayed_work(
 792                                         &((struct fsl_otg *)dev_id)->otg_event,
 793                                         100);
 794                         } else {        /* switch to host */
 795                                 cancel_delayed_work(&
 796                                                     ((struct fsl_otg *)dev_id)->
 797                                                     otg_event);
 798                                 fsl_otg_start_gadget(fsm, 0);
 799                                 otg_drv_vbus(fsm, 1);
 800                                 fsl_otg_start_host(fsm, 1);
 801                         }
 802                         return IRQ_HANDLED;
 803                 }
 804         }
 805         return IRQ_NONE;
 806 }
 807
 808 static struct otg_fsm_ops fsl_otg_ops = {
 809         .chrg_vbus = fsl_otg_chrg_vbus,
 810         .drv_vbus = fsl_otg_drv_vbus,
 811         .loc_conn = fsl_otg_loc_conn,
 812         .loc_sof = fsl_otg_loc_sof,
 813         .start_pulse = fsl_otg_start_pulse,
 814
 815         .add_timer = fsl_otg_fsm_add_timer,
 816         .del_timer = fsl_otg_fsm_del_timer,
 817
 818         .start_host = fsl_otg_start_host,
 819         .start_gadget = fsl_otg_start_gadget,
 820 };
 821
 822 /* Initialize the global variable fsl_otg_dev and request IRQ for OTG */
 823 static int fsl_otg_conf(struct platform_device *pdev)
 824 {
 825         struct fsl_otg *fsl_otg_tc;
 826         int status;
 827
 828         if (fsl_otg_dev)
 829                 return 0;
 830
 831         /* allocate space to fsl otg device */
 832         fsl_otg_tc = kzalloc(sizeof(struct fsl_otg), GFP_KERNEL);
 833         if (!fsl_otg_tc)
 834                 return -ENOMEM;
 835
 836         fsl_otg_tc->phy.otg = kzalloc(sizeof(struct usb_otg), GFP_KERNEL);
 837         if (!fsl_otg_tc->phy.otg) {
 838                 kfree(fsl_otg_tc);
 839                 return -ENOMEM;
 840         }
 841
 842         INIT_DELAYED_WORK(&fsl_otg_tc->otg_event, fsl_otg_event);
 843
 844         INIT_LIST_HEAD(&active_timers);
 845         status = fsl_otg_init_timers(&fsl_otg_tc->fsm);
 846         if (status) {
 847                 pr_info("Couldn't init OTG timers\n");
 848                 goto err;
 849         }
 850         mutex_init(&fsl_otg_tc->fsm.lock);
 851
 852         /* Set OTG state machine operations */
 853         fsl_otg_tc->fsm.ops = &fsl_otg_ops;
 854
 855         /* initialize the otg structure */
 856         fsl_otg_tc->phy.label = DRIVER_DESC;
 857         fsl_otg_tc->phy.dev = &pdev->dev;
 858         fsl_otg_tc->phy.set_power = fsl_otg_set_power;
 859
 860         fsl_otg_tc->phy.otg->phy = &fsl_otg_tc->phy;
 861         fsl_otg_tc->phy.otg->set_host = fsl_otg_set_host;
 862         fsl_otg_tc->phy.otg->set_peripheral = fsl_otg_set_peripheral;
 863         fsl_otg_tc->phy.otg->start_hnp = fsl_otg_start_hnp;
 864         fsl_otg_tc->phy.otg->start_srp = fsl_otg_start_srp;
 865
 866         fsl_otg_dev = fsl_otg_tc;
 867
 868         /* Store the otg transceiver */
 869         status = usb_add_phy(&fsl_otg_tc->phy, USB_PHY_TYPE_USB2);
 870         if (status) {
 871                 pr_warn(FSL_OTG_NAME ": unable to register OTG transceiver.\n");
 872                 goto err;
 873         }
 874
 875         return 0;
 876 err:
 877         fsl_otg_uninit_timers();
 878         kfree(fsl_otg_tc->phy.otg);
 879         kfree(fsl_otg_tc);
 880         return status;
 881 }
 882
 883 /* OTG Initialization */
 884 int usb_otg_start(struct platform_device *pdev)
 885 {
 886         struct fsl_otg *p_otg;
 887         struct usb_phy *otg_trans = usb_get_phy(USB_PHY_TYPE_USB2);
 888         struct otg_fsm *fsm;
 889         int status;
 890         struct resource *res;
 891         u32 temp;
 892         struct fsl_usb2_platform_data *pdata = dev_get_platdata(&pdev->dev);
 893
 894         p_otg = container_of(otg_trans, struct fsl_otg, phy);
 895         fsm = &p_otg->fsm;
 896
 897         /* Initialize the state machine structure with default values */
 898         SET_OTG_STATE(otg_trans, OTG_STATE_UNDEFINED);
 899         fsm->otg = p_otg->phy.otg;
 900
 901         /* We don't require predefined MEM/IRQ resource index */
 902         res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 903         if (!res)
 904                 return -ENXIO;
 905
 906         /* We don't request_mem_region here to enable resource sharing
 907          * with host/device */
 908
 909         usb_dr_regs = ioremap(res->start, sizeof(struct usb_dr_mmap));
 910         p_otg->dr_mem_map = (struct usb_dr_mmap *)usb_dr_regs;
 911         pdata->regs = (void *)usb_dr_regs;
 912
 913         if (pdata->init && pdata->init(pdev) != 0)
 914                 return -EINVAL;
 915
 916         if (pdata->big_endian_mmio) {
 917                 _fsl_readl = _fsl_readl_be;
 918                 _fsl_writel = _fsl_writel_be;
 919         } else {
 920                 _fsl_readl = _fsl_readl_le;
 921                 _fsl_writel = _fsl_writel_le;
 922         }
 923
 924         /* request irq */
 925         p_otg->irq = platform_get_irq(pdev, 0);
 926         status = request_irq(p_otg->irq, fsl_otg_isr,
 927                                 IRQF_SHARED, driver_name, p_otg);
 928         if (status) {
 929                 dev_dbg(p_otg->phy.dev, "can't get IRQ %d, error %d\n",
 930                         p_otg->irq, status);
 931                 iounmap(p_otg->dr_mem_map);
 932                 kfree(p_otg->phy.otg);
 933                 kfree(p_otg);
 934                 return status;
 935         }
 936
 937         /* stop the controller */
 938         temp = fsl_readl(&p_otg->dr_mem_map->usbcmd);
 939         temp &= ~USB_CMD_RUN_STOP;
 940         fsl_writel(temp, &p_otg->dr_mem_map->usbcmd);
 941
 942         /* reset the controller */
 943         temp = fsl_readl(&p_otg->dr_mem_map->usbcmd);
 944         temp |= USB_CMD_CTRL_RESET;
 945         fsl_writel(temp, &p_otg->dr_mem_map->usbcmd);
 946
 947         /* wait reset completed */
 948         while (fsl_readl(&p_otg->dr_mem_map->usbcmd) & USB_CMD_CTRL_RESET)
 949                 ;
 950
 951         /* configure the VBUSHS as IDLE(both host and device) */
 952         temp = USB_MODE_STREAM_DISABLE | (pdata->es ? USB_MODE_ES : 0);
 953         fsl_writel(temp, &p_otg->dr_mem_map->usbmode);
 954
 955         /* configure PHY interface */
 956         temp = fsl_readl(&p_otg->dr_mem_map->portsc);
 957         temp &= ~(PORTSC_PHY_TYPE_SEL | PORTSC_PTW);
 958         switch (pdata->phy_mode) {
 959         case FSL_USB2_PHY_ULPI:
 960                 temp |= PORTSC_PTS_ULPI;
 961                 break;
 962         case FSL_USB2_PHY_UTMI_WIDE:
 963                 temp |= PORTSC_PTW_16BIT;
 964                 /* fall through */
 965         case FSL_USB2_PHY_UTMI:
 966                 temp |= PORTSC_PTS_UTMI;
 967                 /* fall through */
 968         default:
 969                 break;
 970         }
 971         fsl_writel(temp, &p_otg->dr_mem_map->portsc);
 972
 973         if (pdata->have_sysif_regs) {
 974                 /* configure control enable IO output, big endian register */
 975                 temp = __raw_readl(&p_otg->dr_mem_map->control);
 976                 temp |= USB_CTRL_IOENB;
 977                 __raw_writel(temp, &p_otg->dr_mem_map->control);
 978         }
 979
 980         /* disable all interrupt and clear all OTGSC status */
 981         temp = fsl_readl(&p_otg->dr_mem_map->otgsc);
 982         temp &= ~OTGSC_INTERRUPT_ENABLE_BITS_MASK;
 983         temp |= OTGSC_INTERRUPT_STATUS_BITS_MASK | OTGSC_CTRL_VBUS_DISCHARGE;
 984         fsl_writel(temp, &p_otg->dr_mem_map->otgsc);
 985
 986         /*
 987          * The identification (id) input is FALSE when a Mini-A plug is inserted
 988          * in the devices Mini-AB receptacle. Otherwise, this input is TRUE.
 989          * Also: record initial state of ID pin
 990          */
 991         if (fsl_readl(&p_otg->dr_mem_map->otgsc) & OTGSC_STS_USB_ID) {
 992                 p_otg->phy.state = OTG_STATE_UNDEFINED;
 993                 p_otg->fsm.id = 1;
 994         } else {
 995                 p_otg->phy.state = OTG_STATE_A_IDLE;
 996                 p_otg->fsm.id = 0;
 997         }
 998
 999         pr_debug("initial ID pin=%d\n", p_otg->fsm.id);
1000
1001         /* enable OTG ID pin interrupt */
1002         temp = fsl_readl(&p_otg->dr_mem_map->otgsc);
1003         temp |= OTGSC_INTR_USB_ID_EN;
1004         temp &= ~(OTGSC_CTRL_VBUS_DISCHARGE | OTGSC_INTR_1MS_TIMER_EN);
1005         fsl_writel(temp, &p_otg->dr_mem_map->otgsc);
1006
1007         return 0;
1008 }
1009
1010 /*
1011  * state file in sysfs
1012  */
1013 static int show_fsl_usb2_otg_state(struct device *dev,
1014                                    struct device_attribute *attr, char *buf)
1015 {
1016         struct otg_fsm *fsm = &fsl_otg_dev->fsm;
1017         char *next = buf;
1018         unsigned size = PAGE_SIZE;
1019         int t;
1020
1021         mutex_lock(&fsm->lock);
1022
1023         /* basic driver infomation */
1024         t = scnprintf(next, size,
1025                         DRIVER_DESC "\n" "fsl_usb2_otg version: %s\n\n",
1026                         DRIVER_VERSION);
1027         size -= t;
1028         next += t;
1029
1030         /* Registers */
1031         t = scnprintf(next, size,
1032                         "OTGSC:   0x%08x\n"
1033                         "PORTSC:  0x%08x\n"
1034                         "USBMODE: 0x%08x\n"
1035                         "USBCMD:  0x%08x\n"
1036                         "USBSTS:  0x%08x\n"
1037                         "USBINTR: 0x%08x\n",
1038                         fsl_readl(&usb_dr_regs->otgsc),
1039                         fsl_readl(&usb_dr_regs->portsc),
1040                         fsl_readl(&usb_dr_regs->usbmode),
1041                         fsl_readl(&usb_dr_regs->usbcmd),
1042                         fsl_readl(&usb_dr_regs->usbsts),
1043                         fsl_readl(&usb_dr_regs->usbintr));
1044         size -= t;
1045         next += t;
1046
1047         /* State */
1048         t = scnprintf(next, size,
1049                       "OTG state: %s\n\n",
1050                       usb_otg_state_string(fsl_otg_dev->phy.state));
1051         size -= t;
1052         next += t;
1053
1054         /* State Machine Variables */
1055         t = scnprintf(next, size,
1056                         "a_bus_req: %d\n"
1057                         "b_bus_req: %d\n"
1058                         "a_bus_resume: %d\n"
1059                         "a_bus_suspend: %d\n"
1060                         "a_conn: %d\n"
1061                         "a_sess_vld: %d\n"
1062                         "a_srp_det: %d\n"
1063                         "a_vbus_vld: %d\n"
1064                         "b_bus_resume: %d\n"
1065                         "b_bus_suspend: %d\n"
1066                         "b_conn: %d\n"
1067                         "b_se0_srp: %d\n"
1068                         "b_ssend_srp: %d\n"
1069                         "b_sess_vld: %d\n"
1070                         "id: %d\n",
1071                         fsm->a_bus_req,
1072                         fsm->b_bus_req,
1073                         fsm->a_bus_resume,
1074                         fsm->a_bus_suspend,
1075                         fsm->a_conn,
1076                         fsm->a_sess_vld,
1077                         fsm->a_srp_det,
1078                         fsm->a_vbus_vld,
1079                         fsm->b_bus_resume,
1080                         fsm->b_bus_suspend,
1081                         fsm->b_conn,
1082                         fsm->b_se0_srp,
1083                         fsm->b_ssend_srp,
1084                         fsm->b_sess_vld,
1085                         fsm->id);
1086         size -= t;
1087         next += t;
1088
1089         mutex_unlock(&fsm->lock);
1090
1091         return PAGE_SIZE - size;
1092 }
1093
1094 static DEVICE_ATTR(fsl_usb2_otg_state, S_IRUGO, show_fsl_usb2_otg_state, NULL);
1095
1096
1097 /* Char driver interface to control some OTG input */
1098
1099 /*
1100  * Handle some ioctl command, such as get otg
1101  * status and set host suspend
1102  */
1103 static long fsl_otg_ioctl(struct file *file, unsigned int cmd,
1104                           unsigned long arg)
1105 {
1106         u32 retval = 0;
1107
1108         switch (cmd) {
1109         case GET_OTG_STATUS:
1110                 retval = fsl_otg_dev->host_working;
1111                 break;
1112
1113         case SET_A_SUSPEND_REQ:
1114                 fsl_otg_dev->fsm.a_suspend_req_inf = arg;
1115                 break;
1116
1117         case SET_A_BUS_DROP:
1118                 fsl_otg_dev->fsm.a_bus_drop = arg;
1119                 break;
1120
1121         case SET_A_BUS_REQ:
1122                 fsl_otg_dev->fsm.a_bus_req = arg;
1123                 break;
1124
1125         case SET_B_BUS_REQ:
1126                 fsl_otg_dev->fsm.b_bus_req = arg;
1127                 break;
1128
1129         default:
1130                 break;
1131         }
1132
1133         otg_statemachine(&fsl_otg_dev->fsm);
1134
1135         return retval;
1136 }
1137
1138 static int fsl_otg_open(struct inode *inode, struct file *file)
1139 {
1140         return 0;
1141 }
1142
1143 static int fsl_otg_release(struct inode *inode, struct file *file)
1144 {
1145         return 0;
1146 }
1147
1148 static const struct file_operations otg_fops = {
1149         .owner = THIS_MODULE,
1150         .llseek = NULL,
1151         .read = NULL,
1152         .write = NULL,
1153         .unlocked_ioctl = fsl_otg_ioctl,
1154         .open = fsl_otg_open,
1155         .release = fsl_otg_release,
1156 };
1157
1158 static int fsl_otg_probe(struct platform_device *pdev)
1159 {
1160         int ret;
1161
1162         if (!dev_get_platdata(&pdev->dev))
1163                 return -ENODEV;
1164
1165         /* configure the OTG */
1166         ret = fsl_otg_conf(pdev);
1167         if (ret) {
1168                 dev_err(&pdev->dev, "Couldn't configure OTG module\n");
1169                 return ret;
1170         }
1171
1172         /* start OTG */
1173         ret = usb_otg_start(pdev);
1174         if (ret) {
1175                 dev_err(&pdev->dev, "Can't init FSL OTG device\n");
1176                 return ret;
1177         }
1178
1179         ret = register_chrdev(FSL_OTG_MAJOR, FSL_OTG_NAME, &otg_fops);
1180         if (ret) {
1181                 dev_err(&pdev->dev, "unable to register FSL OTG device\n");
1182                 return ret;
1183         }
1184
1185         ret = device_create_file(&pdev->dev, &dev_attr_fsl_usb2_otg_state);
1186         if (ret)
1187                 dev_warn(&pdev->dev, "Can't register sysfs attribute\n");
1188
1189         return ret;
1190 }
1191
1192 static int fsl_otg_remove(struct platform_device *pdev)
1193 {
1194         struct fsl_usb2_platform_data *pdata = dev_get_platdata(&pdev->dev);
1195
1196         usb_remove_phy(&fsl_otg_dev->phy);
1197         free_irq(fsl_otg_dev->irq, fsl_otg_dev);
1198
1199         iounmap((void *)usb_dr_regs);
1200
1201         fsl_otg_uninit_timers();
1202         kfree(fsl_otg_dev->phy.otg);
1203         kfree(fsl_otg_dev);
1204
1205         device_remove_file(&pdev->dev, &dev_attr_fsl_usb2_otg_state);
1206
1207         unregister_chrdev(FSL_OTG_MAJOR, FSL_OTG_NAME);
1208
1209         if (pdata->exit)
1210                 pdata->exit(pdev);
1211
1212         return 0;
1213 }
1214
1215 struct platform_driver fsl_otg_driver = {
1216         .probe = fsl_otg_probe,
1217         .remove = fsl_otg_remove,
1218         .driver = {
1219                 .name = driver_name,
1220                 .owner = THIS_MODULE,
1221         },
1222 };
1223
1224 module_platform_driver(fsl_otg_driver);
1225
1226 MODULE_DESCRIPTION(DRIVER_INFO);
1227 MODULE_AUTHOR(DRIVER_AUTHOR);
1228 MODULE_LICENSE("GPL");