-int inv_mpu6050_write_reg(struct inv_mpu6050_state *st, int reg, u8 d)
-{
- return i2c_smbus_write_i2c_block_data(st->client, reg, 1, &d);
-}
-
-/*
- * The i2c read/write needs to happen in unlocked mode. As the parent
- * adapter is common. If we use locked versions, it will fail as
- * the mux adapter will lock the parent i2c adapter, while calling
- * select/deselect functions.
- */
-static int inv_mpu6050_write_reg_unlocked(struct inv_mpu6050_state *st,
- u8 reg, u8 d)
-{
- int ret;
- u8 buf[2];
- struct i2c_msg msg[1] = {
- {
- .addr = st->client->addr,
- .flags = 0,
- .len = sizeof(buf),
- .buf = buf,
- }
- };
-
- buf[0] = reg;
- buf[1] = d;
- ret = __i2c_transfer(st->client->adapter, msg, 1);
- if (ret != 1)
- return ret;
-
- return 0;
-}
-
-static int inv_mpu6050_select_bypass(struct i2c_adapter *adap, void *mux_priv,
- u32 chan_id)
-{
- struct iio_dev *indio_dev = mux_priv;
- struct inv_mpu6050_state *st = iio_priv(indio_dev);
- int ret = 0;
-
- /* Use the same mutex which was used everywhere to protect power-op */
- mutex_lock(&indio_dev->mlock);
- if (!st->powerup_count) {
- ret = inv_mpu6050_write_reg_unlocked(st, st->reg->pwr_mgmt_1,
- 0);
- if (ret)
- goto write_error;
-
- msleep(INV_MPU6050_REG_UP_TIME);
- }
- if (!ret) {
- st->powerup_count++;
- ret = inv_mpu6050_write_reg_unlocked(st, st->reg->int_pin_cfg,
- st->client->irq |
- INV_MPU6050_BIT_BYPASS_EN);
- }
-write_error:
- mutex_unlock(&indio_dev->mlock);
-
- return ret;
-}
-
-static int inv_mpu6050_deselect_bypass(struct i2c_adapter *adap,
- void *mux_priv, u32 chan_id)
-{
- struct iio_dev *indio_dev = mux_priv;
- struct inv_mpu6050_state *st = iio_priv(indio_dev);
-
- mutex_lock(&indio_dev->mlock);
- /* It doesn't really mattter, if any of the calls fails */
- inv_mpu6050_write_reg_unlocked(st, st->reg->int_pin_cfg,
- st->client->irq);
- st->powerup_count--;
- if (!st->powerup_count)
- inv_mpu6050_write_reg_unlocked(st, st->reg->pwr_mgmt_1,
- INV_MPU6050_BIT_SLEEP);
- mutex_unlock(&indio_dev->mlock);
-
- return 0;
-}
-