+AT_CHECK([ovs-appctl dpif/dump-flows br0 | STRIP_XOUT], [0], [dnl
+skb_priority(0),in_port(1),eth_type(0x0800),ipv4(src=10.0.0.2/255.255.255.252,dst=10.0.0.1/0.0.0.0,proto=1/0,tos=0/0,ttl=64/0,frag=no/0xff), packets:0, bytes:0, used:never, actions: <del>
+skb_priority(0),in_port(1),eth_type(0x0800),ipv4(src=10.0.0.4,dst=10.0.0.3,proto=1,tos=0,ttl=64,frag=no), packets:0, bytes:0, used:never, actions: <del>
+])
+OVS_VSWITCHD_STOP
+AT_CLEANUP
+
+AT_SETUP([ofproto-dpif megaflow - set dl_dst])
+OVS_VSWITCHD_START
+ADD_OF_PORTS([br0], [1], [2])
+AT_DATA([flows.txt], [dnl
+table=0 in_port=1 actions=mod_dl_dst(50:54:00:00:00:0a),output(2)
+])
+AT_CHECK([ovs-ofctl add-flows br0 flows.txt])
+AT_CHECK([ovs-appctl netdev-dummy/receive p1 'in_port(1),eth(src=50:54:00:00:00:09,dst=50:54:00:00:00:0a),eth_type(0x0800),ipv4(src=10.0.0.2,dst=10.0.0.1,proto=1,tos=0,ttl=64,frag=no),icmp(type=8,code=0)'])
+AT_CHECK([ovs-appctl netdev-dummy/receive p1 'in_port(1),eth(src=50:54:00:00:00:0b,dst=50:54:00:00:00:0c),eth_type(0x0800),ipv4(src=10.0.0.4,dst=10.0.0.3,proto=1,tos=0,ttl=64,frag=no),icmp(type=8,code=0)'])
+dnl The megaflows do not match the same fields, since the first packet
+dnl is essentially a no-op. (The new destination MAC is the same as the
+dnl original.) The ofproto-dpif library un-wildcards the destination MAC
+dnl so that a packet that doesn't need its MAC address changed doesn't
+dnl hide one that does. Since the first entry doesn't need to change,
+dnl only the destination MAC address is matched (as decided by
+dnl ofproto-dpif). The second entry actually updates the destination
+dnl MAC, so both the source and destination MAC addresses are
+dnl un-wildcarded, since the ODP commit functions update both the source
+dnl and destination MAC addresses.
+AT_CHECK([ovs-appctl dpif/dump-flows br0 | STRIP_USED], [0], [dnl
+skb_priority(0),in_port(1),eth(src=50:54:00:00:00:09/00:00:00:00:00:00,dst=50:54:00:00:00:0a/ff:ff:ff:ff:ff:ff),eth_type(0x0800),ipv4(src=10.0.0.2/0.0.0.0,dst=10.0.0.1/0.0.0.0,proto=1/0,tos=0/0,ttl=64/0,frag=no/0xff), packets:0, bytes:0, used:never, actions:2
+skb_priority(0),in_port(1),eth(src=50:54:00:00:00:0b,dst=50:54:00:00:00:0c),eth_type(0x0800),ipv4(src=10.0.0.4/0.0.0.0,dst=10.0.0.3/0.0.0.0,proto=1/0,tos=0/0,ttl=64/0,frag=no/0xff), packets:0, bytes:0, used:never, actions:set(eth(src=50:54:00:00:00:0b,dst=50:54:00:00:00:0a)),2
+])
+OVS_VSWITCHD_STOP
+AT_CLEANUP
+
+AT_SETUP([ofproto-dpif megaflow - disabled])
+OVS_VSWITCHD_START
+ADD_OF_PORTS([br0], [1], [2])
+AT_DATA([flows.txt], [dnl
+table=0 in_port=1,ip,nw_dst=10.0.0.1 actions=output(2)
+table=0 in_port=1,ip,nw_dst=10.0.0.3 actions=drop
+])
+AT_CHECK([ovs-appctl upcall/disable-megaflows], [0], [megaflows disabled
+], [])
+AT_CHECK([ovs-appctl vlog/set dpif_netdev:dbg], [0], [], [])
+AT_CHECK([ovs-ofctl add-flows br0 flows.txt])
+for i in 1 2 3 4; do
+ AT_CHECK([ovs-appctl netdev-dummy/receive p1 'in_port(1),eth(src=50:54:00:00:00:09,dst=50:54:00:00:00:0a),eth_type(0x0800),ipv4(src=10.0.0.2,dst=10.0.0.1,proto=1,tos=0,ttl=64,frag=no),icmp(type=8,code=0)'])
+ AT_CHECK([ovs-appctl netdev-dummy/receive p1 'in_port(1),eth(src=50:54:00:00:00:0b,dst=50:54:00:00:00:0c),eth_type(0x0800),ipv4(src=10.0.0.4,dst=10.0.0.3,proto=1,tos=0,ttl=64,frag=no),icmp(type=8,code=0)'])
+done
+AT_CHECK([ovs-appctl dpif/dump-flows br0 | STRIP_USED], [0], [dnl
+skb_priority(0),skb_mark(0),in_port(1/0xffff),eth(src=50:54:00:00:00:09,dst=50:54:00:00:00:0a),eth_type(0x0800),ipv4(src=10.0.0.2/255.255.255.255,dst=10.0.0.1/255.255.255.255,proto=1/0xff,tos=0/0xff,ttl=64/0xff,frag=no/0xfc),icmp(type=8,code=0), packets:3, bytes:180, used:0.0s, actions:2
+skb_priority(0),skb_mark(0),in_port(1/0xffff),eth(src=50:54:00:00:00:0b,dst=50:54:00:00:00:0c),eth_type(0x0800),ipv4(src=10.0.0.4/255.255.255.255,dst=10.0.0.3/255.255.255.255,proto=1/0xff,tos=0/0xff,ttl=64/0xff,frag=no/0xfc),icmp(type=8,code=0), packets:3, bytes:180, used:0.0s, actions:drop
+])
+OVS_VSWITCHD_STOP
+AT_CLEANUP
+
+AT_SETUP([ofproto-dpif - datapath port number change])
+OVS_VSWITCHD_START([set Bridge br0 fail-mode=standalone])
+ADD_OF_PORTS([br0], 1)
+
+# Trace a flow that should output to p1.
+AT_CHECK([ovs-appctl ofproto/trace br0 in_port=LOCAL,dl_src=10:20:30:40:50:60],
+ [0], [stdout])
+AT_CHECK([tail -1 stdout], [0], [Datapath actions: 1
+])
+
+# Change p1's port number to 5.
+AT_CHECK([ovs-appctl dpif-dummy/change-port-number ovs-dummy p1 5])
+
+# Trace a flow that should output to p1 in its new location.
+AT_CHECK([ovs-appctl ofproto/trace br0 in_port=LOCAL,dl_src=10:20:30:40:50:60],
+ [0], [stdout])
+AT_CHECK([tail -1 stdout], [0], [Datapath actions: 5
+])
+OVS_VSWITCHD_STOP
+AT_CLEANUP
+
+# Tests the bundling with various bfd and cfm configurations.
+AT_SETUP([ofproto - bundle with variable bfd/cfm config])
+OVS_VSWITCHD_START([add-br br1 -- set bridge br1 datapath-type=dummy -- \
+ add-bond br0 br0bond p0 p2 bond-mode=active-backup -- \
+ add-bond br1 br1bond p1 p3 bond-mode=active-backup -- \
+ set Interface p1 type=patch options:peer=p0 ofport_request=2 -- \
+ set Interface p3 type=patch options:peer=p2 ofport_request=4 -- \
+ set Interface p0 type=patch options:peer=p1 ofport_request=1 -- \
+ set Interface p2 type=patch options:peer=p3 ofport_request=3 -- \
+ set Interface p0 bfd:enable=true bfd:min_tx=300 bfd:min_rx=300 -- \
+ set Interface p0 cfm_mpid=1 -- \
+ set Interface p1 bfd:enable=true bfd:min_tx=500 bfd:min_rx=500])
+
+ovs-appctl time/stop
+# advance the clock to stablize everything.
+for i in `seq 0 49`; do ovs-appctl time/warp 100; done
+# cfm/show should show 'recv' fault.
+AT_CHECK([ovs-appctl cfm/show | sed -n '/^.*fault:.*/p'], [0], [dnl
+ fault: recv
+])
+# bfd/show should show 'up'.
+AT_CHECK([ovs-appctl bfd/show | sed -n '/^.*Session State:.*/p'], [0], [dnl
+ Local Session State: up
+ Remote Session State: up
+ Local Session State: up
+ Remote Session State: up
+])
+# bond/show should show 'may-enable: true' for all slaves.
+AT_CHECK([ovs-appctl bond/show | sed -n '/^.*may_enable:.*/p'], [0], [dnl
+ may_enable: true
+ may_enable: true
+ may_enable: true
+ may_enable: true
+])
+
+# now disable the bfd on p1.
+AT_CHECK([ovs-vsctl set Interface p1 bfd:enable=false])
+# advance the clock to stablize everything.
+for i in `seq 0 49`; do ovs-appctl time/warp 100; done
+# cfm/show should show 'recv' fault.
+AT_CHECK([ovs-appctl cfm/show | sed -n '/^.*fault:.*/p'], [0], [dnl
+ fault: recv
+])
+# bfd/show should show 'down'.
+AT_CHECK([ovs-appctl bfd/show | sed -n '/^.*Session State:.*/p'], [0], [dnl
+ Local Session State: down
+ Remote Session State: down
+])
+# bond/show should show 'may-enable: false' for p0.
+AT_CHECK([ovs-appctl bond/show | sed -n '/^.*may_enable:.*/p'], [0], [dnl
+ may_enable: false
+ may_enable: true
+ may_enable: true
+ may_enable: true
+])
+
+# now enable the bfd on p1 and disable bfd on p0.
+AT_CHECK([ovs-vsctl set Interface p1 bfd:enable=true])
+AT_CHECK([ovs-vsctl set Interface p0 bfd:enable=false])
+# advance the clock to stablize everything.
+for i in `seq 0 49`; do ovs-appctl time/warp 100; done
+# cfm/show should show 'recv' fault.
+AT_CHECK([ovs-appctl cfm/show | sed -n '/^.*fault:.*/p'], [0], [dnl
+ fault: recv
+])
+# bfd/show should show 'down'.
+AT_CHECK([ovs-appctl bfd/show | sed -n '/^.*Session State:.*/p'], [0], [dnl
+ Local Session State: down
+ Remote Session State: down
+])
+# bond/show should show 'may-enable: false' for p0 and p1.
+AT_CHECK([ovs-appctl bond/show | sed -n '/^.*may_enable:.*/p'], [0], [dnl
+ may_enable: false
+ may_enable: true
+ may_enable: false
+ may_enable: true
+])
+
+OVS_VSWITCHD_STOP
+AT_CLEANUP
+
+AT_SETUP([ofproto-dpif - ofproto-dpif-monitor 1])
+OVS_VSWITCHD_START([add-port br0 p0 -- set interface p0 type=gre options:remote_ip=1.2.3.4])
+
+# enable bfd on p0.
+AT_CHECK([ovs-vsctl set interface p0 bfd:enable=true])
+# check log.
+AT_CHECK([sed -n "s/^.*|ofproto_dpif_monitor(monitor)|INFO|\(.* created\)$/\1/p" ovs-vswitchd.log], [0], [dnl
+monitor thread created
+])
+# disable bfd on p0.
+AT_CHECK([ovs-vsctl set interface p0 bfd:enable=false])
+# check log.
+AT_CHECK([sed -n "s/^.*|ofproto_dpif_monitor(monitor)|INFO|\(.* terminated\)$/\1/p" ovs-vswitchd.log], [0], [dnl
+monitor thread terminated
+])
+AT_CHECK([cat ovs-vswitchd.log | sed -e '/^.*ofproto_dpif_monitor.*$/d' > ovs-vswitchd.log])
+
+# enable cfm on p0.
+AT_CHECK([ovs-vsctl set interface p0 cfm_mpid=10])
+# check log.
+AT_CHECK([sed -n "s/^.*|ofproto_dpif_monitor(monitor)|INFO|\(.* created\)$/\1/p" ovs-vswitchd.log], [0], [dnl
+monitor thread created
+])
+# disable cfm on p0.
+AT_CHECK([ovs-vsctl remove interface p0 cfm_mpid 10])
+# check log.
+AT_CHECK([sed -n "s/^.*|ofproto_dpif_monitor(monitor)|INFO|\(.* terminated\)$/\1/p" ovs-vswitchd.log], [0], [dnl
+monitor thread terminated
+])
+AT_CHECK([cat ovs-vswitchd.log | sed -e '/^.*ofproto_dpif_monitor.*$/d' > ovs-vswitchd.log])
+
+# enable both bfd and cfm on p0.
+AT_CHECK([ovs-vsctl set interface p0 bfd:enable=true cfm_mpid=10])
+# check log.
+AT_CHECK([sed -n "s/^.*|ofproto_dpif_monitor(monitor)|INFO|\(.* created\)$/\1/p" ovs-vswitchd.log], [0], [dnl
+monitor thread created
+])
+# disable bfd on p0.
+AT_CHECK([ovs-vsctl set interface p0 bfd:enable=false])
+# check log, there should not be the log of thread terminated.
+AT_CHECK([sed -n "s/^.*|ofproto_dpif_monitor(monitor)|INFO|\(.* terminated\)$/\1/p" ovs-vswitchd.log], [0], [dnl
+])
+# reenable bfd on p0.
+AT_CHECK([ovs-vsctl set interface p0 bfd:enable=true])
+# check log, should still be on log of thread created.
+AT_CHECK([sed -n "s/^.*|ofproto_dpif_monitor(monitor)|INFO|\(.* created\)$/\1/p" ovs-vswitchd.log], [0], [dnl
+monitor thread created
+])
+# disable bfd and cfm together.
+AT_CHECK([ovs-vsctl set interface p0 bfd:enable=false -- remove interface p0 cfm_mpid 10])
+# check log.
+AT_CHECK([sed -n "s/^.*|ofproto_dpif_monitor(monitor)|INFO|\(.* terminated\)$/\1/p" ovs-vswitchd.log], [0], [dnl
+monitor thread terminated