ovs-ofctl: Merge dump_stats_transaction() into dump_transaction().

[cascardo/ovs.git] / utilities / ovs-vsctl.8.in

diff --git a/utilities/ovs-vsctl.8.in b/utilities/ovs-vsctl.8.in
index 281756c..265ffde 100644 (file)
--- a/utilities/ovs-vsctl.8.in
+++ b/utilities/ovs-vsctl.8.in
@@ -10,11 +10,9 @@
 .  I "\\$1"
 .  RE
 ..
 .  I "\\$1"
 .  RE
 ..

-.TH ovs\-vsctl 8 "November 2009" "Open vSwitch" "Open vSwitch Manual"
+.TH ovs\-vsctl 8 "@VERSION@" "Open vSwitch" "Open vSwitch Manual"

 .\" This program's name:
 .ds PN ovs\-vsctl
 .\" This program's name:
 .ds PN ovs\-vsctl

-.\" SSL peer program's name:
-.ds SN ovsdb\-server

 .
 .SH NAME
 ovs\-vsctl \- utility for querying and configuring \fBovs\-vswitchd\fR
 .
 .SH NAME
 ovs\-vsctl \- utility for querying and configuring \fBovs\-vswitchd\fR


@@ -25,19 +23,17 @@ ovs\-vsctl \- utility for querying and configuring \fBovs\-vswitchd\fR
 .
 .SH DESCRIPTION
 The \fBovs\-vsctl\fR program configures \fBovs\-vswitchd\fR(8) by
 .
 .SH DESCRIPTION
 The \fBovs\-vsctl\fR program configures \fBovs\-vswitchd\fR(8) by

-providing a high\-level interface to its configuration
-database.  This program is mainly intended for use when
-\fBovs\-vswitchd\fR is running.  If it is used when
-\fBovs\-vswitchd\fR is not running, then \fB\-\-no\-wait\fR should be
-specified and configuration changes will only take effect when
-\fBovs\-vswitchd\fR is started.
-.PP
-By default, each time \fBovs\-vsctl\fR runs, it connects to an
-\fBovsdb\-server\fR process that maintains an Open vSwitch
-configuration database.  Using this connection, it queries and
-possibly applies changes to the database, depending on the supplied
-commands.  Then, if it applied any changes, it waits until
-\fBovs\-vswitchd\fR has finished reconfiguring itself before it exits.
+providing a high\-level interface to its configuration database.
+See \fBovs\-vswitchd.conf.db\fR(5) for comprehensive documentation of
+the database schema.
+.PP
+\fBovs\-vsctl\fR connects to an \fBovsdb\-server\fR process that
+maintains an Open vSwitch configuration database.  Using this
+connection, it queries and possibly applies changes to the database,
+depending on the supplied commands.  Then, if it applied any changes,
+by default it waits until \fBovs\-vswitchd\fR has finished
+reconfiguring itself before it exits.  (If you use \fBovs\-vsctl\fR
+when \fBovs\-vswitchd\fR is not running, use \fB\-\-no\-wait\fR.)

 .PP
 \fBovs\-vsctl\fR can perform any number of commands in a single run,
 implemented as a single atomic transaction against the database.
 .PP
 \fBovs\-vsctl\fR can perform any number of commands in a single run,
 implemented as a single atomic transaction against the database.


@@ -45,9 +41,9 @@ implemented as a single atomic transaction against the database.
 The \fBovs\-vsctl\fR command line begins with global options (see
 \fBOPTIONS\fR below for details).  The global options are followed by
 one or more commands.  Each command should begin with \fB\-\-\fR by
 The \fBovs\-vsctl\fR command line begins with global options (see
 \fBOPTIONS\fR below for details).  The global options are followed by
 one or more commands.  Each command should begin with \fB\-\-\fR by

-itself as a command-line argument, to separate it from the global
-options and following commands.  (If the first command does not have
-any options, then the first \fB\-\-\fR may be omitted.)  The command
+itself as a command-line argument, to separate it from the following
+commands.  (The \fB\-\-\fR before the first command is optional.)  The
+command

 itself starts with command-specific options, if any, followed by the
 command name and any arguments.  See \fBEXAMPLES\fR below for syntax
 examples.
 itself starts with command-specific options, if any, followed by the
 command name and any arguments.  See \fBEXAMPLES\fR below for syntax
 examples.


@@ -69,7 +65,8 @@ When such a ``fake bridge'' is active, \fBovs\-vsctl\fR will treat it
 much like a bridge separate from its ``parent bridge,'' but the actual
 implementation in Open vSwitch uses only a single bridge, with ports on
 the fake bridge assigned the implicit VLAN of the fake bridge of which
 much like a bridge separate from its ``parent bridge,'' but the actual
 implementation in Open vSwitch uses only a single bridge, with ports on
 the fake bridge assigned the implicit VLAN of the fake bridge of which

-they are members.
+they are members.  (A fake bridge for VLAN 0 receives packets that
+have no 802.1Q tag or a tag with VLAN 0.)

 .
 .SH OPTIONS
 .
 .
 .SH OPTIONS
 .


@@ -91,7 +88,7 @@ following forms:
 .
 .IP "\fB\-\-no\-wait\fR"
 Prevents \fBovs\-vsctl\fR from waiting for \fBovs\-vswitchd\fR to
 .
 .IP "\fB\-\-no\-wait\fR"
 Prevents \fBovs\-vsctl\fR from waiting for \fBovs\-vswitchd\fR to

-reconfigure itself according to the the modified database.  This
+reconfigure itself according to the modified database.  This

 option should be used if \fBovs\-vswitchd\fR is not running;
 otherwise, \fBovs\-vsctl\fR will not exit until \fBovs\-vswitchd\fR
 starts.
 option should be used if \fBovs\-vswitchd\fR is not running;
 otherwise, \fBovs\-vsctl\fR will not exit until \fBovs\-vswitchd\fR
 starts.


@@ -104,7 +101,7 @@ By default, \fBovs\-vsctl\fR logs its arguments and the details of any
 changes that it makes to the system log.  This option disables this
 logging.
 .IP
 changes that it makes to the system log.  This option disables this
 logging.
 .IP

-This option is equivalent to \fB\-\-verbose=vvsctl:syslog:warn\fR.
+This option is equivalent to \fB\-\-verbose=vsctl:syslog:warn\fR.

 .
 .IP "\fB\-\-oneline\fR"
 Modifies the output format so that the output for each command is printed
 .
 .IP "\fB\-\-oneline\fR"
 Modifies the output format so that the output for each command is printed


@@ -112,6 +109,9 @@ on a single line.  New-line characters that would otherwise separate
 lines are printed as \fB\\n\fR, and any instances of \fB\\\fR that
 would otherwise appear in the output are doubled.
 Prints a blank line for each command that has no output.
 lines are printed as \fB\\n\fR, and any instances of \fB\\\fR that
 would otherwise appear in the output are doubled.
 Prints a blank line for each command that has no output.

+This option does not affect the formatting of output from the
+\fBlist\fR or \fBfind\fR commands; see \fBTable Formatting Options\fR
+below.

 .
 .IP "\fB\-\-dry\-run\fR"
 Prevents \fBovs\-vsctl\fR from actually modifying the database.
 .
 .IP "\fB\-\-dry\-run\fR"
 Prevents \fBovs\-vsctl\fR from actually modifying the database.


@@ -125,11 +125,31 @@ to approximately \fIsecs\fR seconds.  If the timeout expires,
 would normally happen only if the database cannot be contacted, or if
 the system is overloaded.)
 .
 would normally happen only if the database cannot be contacted, or if
 the system is overloaded.)
 .

+.IP "\fB\-\-retry\fR"
+Without this option, if \fBovs\-vsctl\fR connects outward to the
+database server (the default) then \fBovs\-vsctl\fR will try to
+connect once and exit with an error if the connection fails (which
+usually means that \fBovsdb\-server\fR is not running).
+.IP
+With this option, or if \fB\-\-db\fR specifies that \fBovs\-vsctl\fR
+should listen for an incoming connection from the database server,
+then \fBovs\-vsctl\fR will wait for a connection to the database
+forever.
+.IP
+Regardless of this setting, \fB\-\-timeout\fR always limits how long
+\fBovs\-vsctl\fR will wait.
+.
+.SS "Table Formatting Options"
+These options control the format of output from the \fBlist\fR and
+\fBfind\fR commands.
+.so lib/table.man
+.

 .SS "Public Key Infrastructure Options"
 .so lib/ssl.man
 .so lib/ssl-bootstrap.man
 .so lib/ssl-peer-ca-cert.man
 .so lib/vlog.man
 .SS "Public Key Infrastructure Options"
 .so lib/ssl.man
 .so lib/ssl-bootstrap.man
 .so lib/ssl-peer-ca-cert.man
 .so lib/vlog.man

+.so lib/common.man

 .
 .SH COMMANDS
 The commands implemented by \fBovs\-vsctl\fR are described in the
 .
 .SH COMMANDS
 The commands implemented by \fBovs\-vsctl\fR are described in the


@@ -145,13 +165,17 @@ Any successful \fBovs\-vsctl\fR command automatically initializes the
 Open vSwitch database if it is empty.  This command is provided to
 initialize the database without executing any other command.
 .
 Open vSwitch database if it is empty.  This command is provided to
 initialize the database without executing any other command.
 .

+.IP "\fBshow\fR"
+Prints a brief overview of the database contents.
+.

 .IP "\fBemer\-reset\fR"
 Reset the configuration into a clean state.  It deconfigures OpenFlow
 controllers, OVSDB servers, and SSL, and deletes port mirroring,
 .IP "\fBemer\-reset\fR"
 Reset the configuration into a clean state.  It deconfigures OpenFlow
 controllers, OVSDB servers, and SSL, and deletes port mirroring,

-NetFlow, and sFlow configuration.  This command also removes all
-\fBother\-config\fR keys from all database records, except that
-\fBother\-config:hwaddr\fR is preserved if it is present in a Bridge
-record.  Other networking configuration is left as-is.
+\fBfail_mode\fR, NetFlow, sFlow, and IPFIX configuration.  This
+command also removes all \fBother\-config\fR keys from all database
+records, except that \fBother\-config:hwaddr\fR is preserved if it is
+present in a Bridge record.  Other networking configuration is left
+as-is.

 .
 .SS "Bridge Commands"
 These commands examine and manipulate Open vSwitch bridges.
 .
 .SS "Bridge Commands"
 These commands examine and manipulate Open vSwitch bridges.


@@ -161,20 +185,21 @@ Creates a new bridge named \fIbridge\fR.  Initially the bridge will
 have no ports (other than \fIbridge\fR itself).
 .IP
 Without \fB\-\-may\-exist\fR, attempting to create a bridge that
 have no ports (other than \fIbridge\fR itself).
 .IP
 Without \fB\-\-may\-exist\fR, attempting to create a bridge that

-exists is an error.  With \fB\-\-may\-exist\fR, \fIbridge\fR may
-already exist (but it must be a real bridge, not a VLAN bridge).
+exists is an error.  With \fB\-\-may\-exist\fR, this command does
+nothing if \fIbridge\fR already exists as a real bridge.

 .
 .IP "[\fB\-\-may\-exist\fR] \fBadd\-br \fIbridge parent vlan\fR"
 Creates a ``fake bridge'' named \fIbridge\fR within the existing Open
 vSwitch bridge \fIparent\fR, which must already exist and must not
 itself be a fake bridge.  The new fake bridge will be on 802.1Q VLAN
 .
 .IP "[\fB\-\-may\-exist\fR] \fBadd\-br \fIbridge parent vlan\fR"
 Creates a ``fake bridge'' named \fIbridge\fR within the existing Open
 vSwitch bridge \fIparent\fR, which must already exist and must not
 itself be a fake bridge.  The new fake bridge will be on 802.1Q VLAN

-\fIvlan\fR, which must be an integer between 1 and 4095.  Initially
+\fIvlan\fR, which must be an integer between 0 and 4095.  The parent
+bridge must not already have a fake bridge for \fIvlan\fR.  Initially

 \fIbridge\fR will have no ports (other than \fIbridge\fR itself).
 .IP
 Without \fB\-\-may\-exist\fR, attempting to create a bridge that
 \fIbridge\fR will have no ports (other than \fIbridge\fR itself).
 .IP
 Without \fB\-\-may\-exist\fR, attempting to create a bridge that

-exists is an error.  With \fB\-\-may\-exist\fR, \fIbridge\fR may
-already exist (but it must have the specified \fIvlan\fR and
-\fIparent\fR).
+exists is an error.  With \fB\-\-may\-exist\fR, this command does
+nothing if \fIbridge\fR already exists as a VLAN bridge under
+\fIparent\fR for \fIvlan\fR.

 .
 .IP "[\fB\-\-if\-exists\fR] \fBdel\-br \fIbridge\fR"
 Deletes \fIbridge\fR and all of its ports.  If \fIbridge\fR is a real
 .
 .IP "[\fB\-\-if\-exists\fR] \fBdel\-br \fIbridge\fR"
 Deletes \fIbridge\fR and all of its ports.  If \fIbridge\fR is a real


@@ -185,9 +210,10 @@ Without \fB\-\-if\-exists\fR, attempting to delete a bridge that does
 not exist is an error.  With \fB\-\-if\-exists\fR, attempting to
 delete a bridge that does not exist has no effect.
 .
 not exist is an error.  With \fB\-\-if\-exists\fR, attempting to
 delete a bridge that does not exist has no effect.
 .

-.IP "\fBlist\-br\fR"
+.IP "[\fB\-\-real\fR|\fB\-\-fake\fR] \fBlist\-br\fR"

 Lists all existing real and fake bridges on standard output, one per
 Lists all existing real and fake bridges on standard output, one per

-line.
+line.  With \fB\-\-real\fR or \fB\-\-fake\fR, only bridges of that type
+are returned.

 .
 .IP "\fBbr\-exists \fIbridge\fR"
 Tests whether \fIbridge\fR exists as a real or fake bridge.  If so,
 .
 .IP "\fBbr\-exists \fIbridge\fR"
 Tests whether \fIbridge\fR exists as a real or fake bridge.  If so,


@@ -250,13 +276,15 @@ port for VLAN 9.  The syntax is the same as that for the \fBset\fR
 command (see \fBDatabase Commands\fR below).
 .IP
 Without \fB\-\-may\-exist\fR, attempting to create a port that exists
 command (see \fBDatabase Commands\fR below).
 .IP
 Without \fB\-\-may\-exist\fR, attempting to create a port that exists

-is an error.  With \fB\-\-may\-exist\fR, \fIport\fR may already exist
-(but it must be on \fIbridge\fR and not be a bonded port).
+is an error.  With \fB\-\-may\-exist\fR, this command does nothing if
+\fIport\fR already exists on \fIbridge\fR and is not a bonded port.

 .
 .IP "[\fB\-\-fake\-iface\fR] \fBadd\-bond \fIbridge port iface\fR\&... [\fIcolumn\fR[\fB:\fIkey\fR]\fR=\fIvalue\fR]\&...\fR"
 Creates on \fIbridge\fR a new port named \fIport\fR that bonds
 together the network devices given as each \fIiface\fR.  At least two
 .
 .IP "[\fB\-\-fake\-iface\fR] \fBadd\-bond \fIbridge port iface\fR\&... [\fIcolumn\fR[\fB:\fIkey\fR]\fR=\fIvalue\fR]\&...\fR"
 Creates on \fIbridge\fR a new port named \fIport\fR that bonds
 together the network devices given as each \fIiface\fR.  At least two

-interfaces must be named.
+interfaces must be named.  If the interfaces are DPDK enabled then
+the transaction will need to include operations to explicitly set the
+interface type to 'dpdk'.

 .IP
 Optional arguments set values of column in the Port record created by
 the command.  The syntax is the same as that for the \fBset\fR command
 .IP
 Optional arguments set values of column in the Port record created by
 the command.  The syntax is the same as that for the \fBset\fR command


@@ -267,9 +295,9 @@ created.  This should only be used for compatibility with legacy
 software that requires it.
 .IP
 Without \fB\-\-may\-exist\fR, attempting to create a port that exists
 software that requires it.
 .IP
 Without \fB\-\-may\-exist\fR, attempting to create a port that exists

-is an error.  With \fB\-\-may\-exist\fR, \fIport\fR may already exist
-(but it must be on \fIbridge\fR and bond together exactly the
-specified interface).
+is an error.  With \fB\-\-may\-exist\fR, this command does nothing if
+\fIport\fR already exists on \fIbridge\fR and bonds together exactly
+the specified interfaces.

 .
 .IP "[\fB\-\-if\-exists\fR] \fBdel\-port \fR[\fIbridge\fR] \fIport\fR"
 Deletes \fIport\fR.  If \fIbridge\fR is omitted, \fIport\fR is removed
 .
 .IP "[\fB\-\-if\-exists\fR] \fBdel\-port \fR[\fIbridge\fR] \fIport\fR"
 Deletes \fIport\fR.  If \fIbridge\fR is omitted, \fIport\fR is removed


@@ -313,8 +341,13 @@ output.
 .SS "OpenFlow Controller Connectivity"
 .
 \fBovs\-vswitchd\fR can perform all configured bridging and switching
 .SS "OpenFlow Controller Connectivity"
 .
 \fBovs\-vswitchd\fR can perform all configured bridging and switching

-locally, or it can be configured to connect a given bridge to one or
-more external OpenFlow controllers, such as NOX.
+locally, or it can be configured to communicate with one or more
+external OpenFlow controllers.  The switch is typically configured to
+connect to a primary controller that takes charge of the bridge's flow
+table to implement a network policy.  In addition, the switch can be
+configured to listen to connections from service controllers.  Service
+controllers are typically used for occasional support and maintenance,
+e.g. with \fBovs\-ofctl\fR.

 .
 .IP "\fBget\-controller\fR \fIbridge\fR"
 Prints the configured controller target.
 .
 .IP "\fBget\-controller\fR \fIbridge\fR"
 Prints the configured controller target.


@@ -328,6 +361,7 @@ use any of the following forms:
 .
 .RS
 .so lib/vconn-active.man
 .
 .RS
 .so lib/vconn-active.man

+.so lib/vconn-passive.man

 .RE
 .
 .ST "Controller Failure Settings"
 .RE
 .
 .ST "Controller Failure Settings"


@@ -342,7 +376,7 @@ If the value is \fBstandalone\fR, or if neither of these settings
 is set, \fBovs\-vswitchd\fR will take over
 responsibility for setting up
 flows when no message has been received from the controller for three
 is set, \fBovs\-vswitchd\fR will take over
 responsibility for setting up
 flows when no message has been received from the controller for three

-times the inactivity probe interval (xxx needs to be exposed).  In this mode,
+times the inactivity probe interval.  In this mode,

 \fBovs\-vswitchd\fR causes the datapath to act like an ordinary
 MAC-learning switch.  \fBovs\-vswitchd\fR will continue to retry connecting
 to the controller in the background and, when the connection succeeds,
 \fBovs\-vswitchd\fR causes the datapath to act like an ordinary
 MAC-learning switch.  \fBovs\-vswitchd\fR will continue to retry connecting
 to the controller in the background and, when the connection succeeds,


@@ -360,21 +394,45 @@ Deletes the configured failure mode.
 .IP "\fBset\-fail\-mode\fR \fIbridge\fR \fBstandalone\fR|\fBsecure\fR"
 Sets the configured failure mode.
 .
 .IP "\fBset\-fail\-mode\fR \fIbridge\fR \fBstandalone\fR|\fBsecure\fR"
 Sets the configured failure mode.
 .

+.SS "Manager Connectivity"
+.
+These commands manipulate the \fBmanager_options\fR column in the
+\fBOpen_vSwitch\fR table and rows in the \fBManagers\fR table.  When
+\fBovsdb\-server\fR is configured to use the \fBmanager_options\fR column for
+OVSDB connections (as described in \fBINSTALL.Linux\fR and in the startup
+scripts provided with Open vSwitch), this allows the administrator to use
+\fBovs\-vsctl\fR to configure database connections.
+.
+.IP "\fBget\-manager\fR"
+Prints the configured manager(s).
+.
+.IP "\fBdel\-manager\fR"
+Deletes the configured manager(s).
+.
+.IP "\fBset\-manager\fR \fItarget\fR\&..."
+Sets the configured manager target or targets.  Each \fItarget\fR may
+use any of the following forms:
+.
+.RS
+.so ovsdb/remote-active.man
+.so ovsdb/remote-passive.man
+.RE
+.

 .SS "SSL Configuration"
 When \fBovs\-vswitchd\fR is configured to connect over SSL for management or
 controller connectivity, the following parameters are required:
 .TP
 .SS "SSL Configuration"
 When \fBovs\-vswitchd\fR is configured to connect over SSL for management or
 controller connectivity, the following parameters are required:
 .TP

-\fBprivate\-key\fR
+\fIprivate-key\fR

 Specifies a PEM file containing the private key used as the virtual
 switch's identity for SSL connections to the controller.
 .TP
 Specifies a PEM file containing the private key used as the virtual
 switch's identity for SSL connections to the controller.
 .TP

-\fBcertificate\fR
+\fIcertificate\fR

 Specifies a PEM file containing a certificate, signed by the
 certificate authority (CA) used by the controller and manager, that
 certifies the virtual switch's private key, identifying a trustworthy
 switch.
 .TP
 Specifies a PEM file containing a certificate, signed by the
 certificate authority (CA) used by the controller and manager, that
 certifies the virtual switch's private key, identifying a trustworthy
 switch.
 .TP

-\fBca\-cert\fR
+\fIca-cert\fR

 Specifies a PEM file containing the CA certificate used to verify that
 the virtual switch is connected to a trustworthy controller.
 .PP
 Specifies a PEM file containing the CA certificate used to verify that
 the virtual switch is connected to a trustworthy controller.
 .PP


@@ -391,13 +449,14 @@ Prints the SSL configuration.
 Deletes the current SSL configuration.
 .
 .IP "[\fB\-\-bootstrap\fR] \fBset\-ssl\fR \fIprivate-key\fR \fIcertificate\fR \fIca-cert\fR"
 Deletes the current SSL configuration.
 .
 .IP "[\fB\-\-bootstrap\fR] \fBset\-ssl\fR \fIprivate-key\fR \fIcertificate\fR \fIca-cert\fR"

-Sets the SSL configuration.  The \fB\-\-bootstrap\fR option is described 
+Sets the SSL configuration.  The \fB\-\-bootstrap\fR option is described

 below.
 .
 .ST "CA Certificate Bootstrap"
 .PP
 Ordinarily, all of the files named in the SSL configuration must exist
 below.
 .
 .ST "CA Certificate Bootstrap"
 .PP
 Ordinarily, all of the files named in the SSL configuration must exist

-when \fBovs\-vswitchd\fR starts.  However, if the \fB\-\-bootstrap\fR 
+when \fBovs\-vswitchd\fR starts.  However, if the \fIca-cert\fR file
+does not exist and the \fB\-\-bootstrap\fR

 option is given, then \fBovs\-vswitchd\fR will attempt to obtain the
 CA certificate from the controller on its first SSL connection and
 save it to the named PEM file.  If it is successful, it will
 option is given, then \fBovs\-vswitchd\fR will attempt to obtain the
 CA certificate from the controller on its first SSL connection and
 save it to the named PEM file.  If it is successful, it will


@@ -411,9 +470,28 @@ for bootstrapping.
 .PP
 This option is only useful if the controller sends its CA certificate
 as part of the SSL certificate chain.  The SSL protocol does not
 .PP
 This option is only useful if the controller sends its CA certificate
 as part of the SSL certificate chain.  The SSL protocol does not

-require the controller to send the CA certificate, but
-\fBovs\-controller\fR(8) can be configured to do so with the
-\fB\-\-peer\-ca\-cert\fR option.
+require the controller to send the CA certificate.
+.
+.SS "Auto-Attach Commands"
+.
+The IETF Auto-Attach SPBM draft standard describes a compact method of using
+IEEE 802.1AB Link Layer Discovery Protocol (LLDP) together with a IEEE 802.1aq
+Shortest Path Bridging (SPB) network to automatically attach network devices to
+individual services in a SPB network.  The intent here is to allow network
+applications and devices using OVS to be able to easily take advantage of
+features offered by industry standard SPB networks. A fundamental element of
+the Auto-Attach feature is to map traditional VLANs onto SPB I_SIDs. These
+commands manage the Auto-Attach I-SID/VLAN mappings.
+.
+.IP "\fBadd\-aa\-mapping \fIbridge i-sid vlan\fR"
+Creates a new Auto-Attach mapping on \fIbridge\fR for \fIi-sid\fR
+and \fIvlan\fR.
+.
+.IP "\fBdel\-aa\-mapping \fIbridge i-sid vlan\fR"
+Deletes an Auto-Attach mapping on \fIbridge\fR for \fIi-sid\fR
+and \fIvlan\fR.
+.IP "\fBget\-aa\-mapping \fIbridge\fR"
+Lists all of the Auto-Attach mappings within \fIbridge\fR on standard output.

 .
 .SS "Database Commands"
 .
 .
 .SS "Database Commands"
 .


@@ -444,12 +522,24 @@ A bridge port.  Records may be identified by port name.
 .IP "\fBInterface\fR"
 A network device attached to a port.  Records may be identified by
 name.
 .IP "\fBInterface\fR"
 A network device attached to a port.  Records may be identified by
 name.

+.IP "\fBFlow_Table\fR"
+Configuration for a particular OpenFlow flow table.  Records may be
+identified by name.
+.IP "\fBQoS\fR"
+Quality-of-service configuration for a \fBPort\fR.  Records may be
+identified by port name.
+.IP "\fBQueue\fR"
+Configuration for one queue within a \fBQoS\fR configuration.  Records
+may only be identified by UUID.

 .IP "\fBMirror\fR"
 A port mirroring configuration attached to a bridge.  Records may be
 identified by mirror name.
 .IP "\fBController\fR"
 Configuration for an OpenFlow controller.  A controller attached to a
 particular bridge may be identified by the bridge's name.
 .IP "\fBMirror\fR"
 A port mirroring configuration attached to a bridge.  Records may be
 identified by mirror name.
 .IP "\fBController\fR"
 Configuration for an OpenFlow controller.  A controller attached to a
 particular bridge may be identified by the bridge's name.

+.IP "\fBManager\fR"
+Configuration for an OVSDB connection.  Records may be identified
+by target (e.g. \fBtcp:1.2.3.4\fR).

 .IP "\fBNetFlow\fR"
 A NetFlow configuration attached to a bridge.  Records may be
 identified by bridge name.
 .IP "\fBNetFlow\fR"
 A NetFlow configuration attached to a bridge.  Records may be
 identified by bridge name.


@@ -458,8 +548,16 @@ The global SSL configuration for \fBovs\-vswitchd\fR.  The record
 attached to the \fBOpen_vSwitch\fR table may be identified by
 specifying \fB.\fR as the record name.
 .IP "\fBsFlow\fR"
 attached to the \fBOpen_vSwitch\fR table may be identified by
 specifying \fB.\fR as the record name.
 .IP "\fBsFlow\fR"

-An sFlow configuration attached to a bridge.  Records may be
+An sFlow exporter configuration attached to a bridge.  Records may be

 identified by bridge name.
 identified by bridge name.

+.IP "\fBIPFIX\fR"
+An IPFIX exporter configuration attached to a bridge.  Records may be
+identified by bridge name.
+.IP "\fBFlow_Sample_Collector_Set\fR"
+An IPFIX exporter configuration attached to a bridge for sampling
+packets on a per-flow basis using OpenFlow \fBsample\fR actions.
+.IP "\fBAutoAttach\fR"
+Configuration for Auto Attach within a bridge.

 .PP
 Record names must be specified in full and with correct
 capitalization.  Names of tables and columns are not case-sensitive,
 .PP
 Record names must be specified in full and with correct
 capitalization.  Names of tables and columns are not case-sensitive,


@@ -467,145 +565,7 @@ and \fB\-\-\fR and \fB_\fR are treated interchangeably.  Unique
 abbreviations are acceptable, e.g. \fBnet\fR or \fBn\fR is sufficient
 to identify the \fBNetFlow\fR table.
 .
 abbreviations are acceptable, e.g. \fBnet\fR or \fBn\fR is sufficient
 to identify the \fBNetFlow\fR table.
 .

-.ST "Database Values"
-.PP
-Each column in the database accepts a fixed type of data.  The
-currently defined basic types, and their representations, are:
-.IP "integer"
-A decimal integer in the range \-2**63 to 2**63\-1, inclusive.
-.IP "real"
-A floating-point number.
-.IP "Boolean"
-True or false, written \fBtrue\fR or \fBfalse\fR, respectively.
-.IP "string"
-An arbitrary Unicode string, except that null bytes are not allowed.
-Quotes are optional for most strings that begin with an English letter
-or underscore and consist only of letters, underscores, hyphens, and
-periods.  However, \fBtrue\fR and \fBfalse\fR and strings that match
-the syntax of UUIDs (see below) must be enclosed in double quotes to
-distinguish them from other basic types.  When double quotes are used,
-the syntax is that of strings in JSON, e.g. backslashes may be used to
-escape special characters.  The empty string must be represented as a
-pair of double quotes (\fB""\fR).
-.IP "UUID"
-Either a universally unique identifier in the style of RFC 4122,
-e.g. \fBf81d4fae\-7dec\-11d0\-a765\-00a0c91e6bf6\fR, or an \fB@\fIname\fR
-defined by a \fBget\fR or \fBcreate\fR command within the same \fBovs\-vsctl\fR
-invocation.
-.PP
-Multiple values in a single column may be separated by spaces or a
-single comma.  When multiple values are present, duplicates are not
-allowed, and order is not important.  Conversely, some database
-columns can have an empty set of values, represented as \fB[]\fR, and
-square brackets may optionally enclose other non-empty sets or single
-values as well.
-.PP
-A few database columns are ``maps'' of key-value pairs, where the key
-and the value are each some fixed database type.  These are specified
-in the form \fIkey\fB=\fIvalue\fR, where \fIkey\fR and \fIvalue\fR
-follow the syntax for the column's key type and value type,
-respectively.  When multiple pairs are present (separated by spaces or
-a comma), duplicate keys are not allowed, and again the order is not
-important.  Duplicate values are allowed.  An empty map is represented
-as \fB{}\fR, and curly braces may be optionally enclose non-empty maps
-as well.
-.
-.ST "Database Command Syntax"
-.IP "\fBlist \fItable \fR[\fIrecord\fR]..."
-List the values of all columns of each specified \fIrecord\fR.  If no
-records are specified, lists all the records in \fItable\fR.
-.IP
-The UUIDs shown for rows created in the same \fBovs\-vsctl\fR
-invocation will be wrong.
-.
-.IP "[\fB\-\-id=@\fIname\fR] [\fB\-\-if\-exists\fR] \fBget \fItable record \fR[\fIcolumn\fR[\fB:\fIkey\fR]]..."
-Prints the value of each specified \fIcolumn\fR in the given
-\fIrecord\fR in \fItable\fR.  For map columns, a \fIkey\fR may
-optionally be specified, in which case the value associated with
-\fIkey\fR in the column is printed, instead of the entire map.
-.IP
-For a map column, without \fB\-\-if\-exists\fR it is an error if
-\fIkey\fR does not exist; with it, a blank line is printed.  If
-\fIcolumn\fR is not a map column or if \fIkey\fR is not specified,
-\fB\-\-if\-exists\fR has no effect.
-.IP
-If \fB@\fIname\fR is specified, then the UUID for \fIrecord\fR may be
-referred to by that name later in the same \fBovs\-vsctl\fR
-invocation in contexts where a UUID is expected.
-.
-.IP "\fBset \fItable record column\fR[\fB:\fIkey\fR]\fB=\fIvalue\fR..."
-Sets the value of each specified \fIcolumn\fR in the given
-\fIrecord\fR in \fItable\fR to \fIvalue\fR.  For map columns, a
-\fIkey\fR may optionally be specified, in which case the value
-associated with \fIkey\fR in that column is changed (or added, if none
-exists), instead of the entire map.
-.
-.IP "\fBadd \fItable record column \fR[\fIkey\fB=\fR]\fIvalue\fR..."
-Adds the specified value or key-value pair to \fIcolumn\fR in
-\fIrecord\fR in \fItable\fR.  If \fIcolumn\fR is a map, then \fIkey\fR
-is required, otherwise it is prohibited.  If \fIkey\fR already exists
-in a map column, then the current \fIvalue\fR is not replaced (use the
-\fBset\fR command to replace an existing value).
-.
-.IP "\fBremove \fItable record column \fR\fIvalue\fR..."
-.IQ "\fBremove \fItable record column \fR\fIkey\fR..."
-.IQ "\fBremove \fItable record column \fR\fIkey\fB=\fR\fIvalue\fR..."
-Removes the specified values or key-value pairs from \fIcolumn\fR in
-\fIrecord\fR in \fItable\fR.  The first form applies to columns that
-are not maps: each specified \fIvalue\fR is removed from the column.
-The second and third forms apply to map columns: if only a \fIkey\fR
-is specified, then any key-value pair with the given \fIkey\fR is
-removed, regardless of its value; if a \fIvalue\fR is given then a
-pair is removed only if both key and value match.
-.IP
-It is not an error if the column does not contain the specified key or
-value or pair.
-.
-.IP "\fBclear\fR \fItable record column\fR..."
-Sets each \fIcolumn\fR in \fIrecord\fR in \fItable\fR to the empty set
-or empty map, as appropriate.  This command applies only to columns
-that are allowed to be empty.
-.
-.IP "[\fB\-\-id=@\fIname\fR] \fBcreate\fR \fItable column\fR[\fB:\fIkey\fR]\fB=\fIvalue\fR..."
-Creates a new record in \fItable\fR and sets the initial values of
-each \fIcolumn\fR.  Columns not explicitly set will receive their
-default values.  Outputs the UUID of the new row.
-.IP
-If \fB@\fIname\fR is specified, then the UUID for the new row may be
-referred to by that name elsewhere in the same \fBovs\-vsctl\fR
-invocation in contexts where a UUID is expected.  Such references may
-precede or follow the \fBcreate\fR command.
-.
-.IP "\fR[\fB\-\-if\-exists\fR] \fBdestroy \fItable record\fR..."
-Deletes each specified \fIrecord\fR from \fItable\fR.  Unless
-\fB\-\-if\-exists\fR is specified, each \fIrecord\fRs must exist.
-.
-.IP "\fBwait\-until \fItable record \fR[\fIcolumn\fR[\fB:\fIkey\fR]\fB=\fIvalue\fR]..."
-Waits until \fItable\fR contains a record named \fIrecord\fR whose
-\fIcolumn\fR equals \fIvalue\fR or, if \fIkey\fR is specified, whose
-\fIcolumn\fR contains a \fIkey\fR with the specified \fIvalue\fR.  Any
-of the operators \fB!=\fR, \fB<\fR, \fB>\fR, \fB<=\fR, or \fB>=\fR may
-be substituted for \fB=\fR to test for inequality, less than, greater
-than, less than or equal to, or greater than or equal to,
-respectively.  (Don't forget to escape \fB<\fR or \fB>\fR from
-interpretation by the shell.)
-.IP
-If no \fIcolumn\fR[\fB:\fIkey\fR]\fB=\fIvalue\fR arguments are given,
-this command waits only until \fIrecord\fR exists.  If more than one
-such argument is given, the command waits until all of them are
-satisfied.
-.IP
-Usually \fBwait\-until\fR should be placed at the beginning of a set
-of \fBovs\-vsctl\fR commands.  For example, \fBwait\-until bridge br0
-\-\- get bridge br0 datapath_id\fR waits until a bridge named
-\fBbr0\fR is created, then prints its \fBdatapath_id\fR column,
-whereas \fBget bridge br0 datapath_id \-\- wait\-until bridge br0\fR
-will abort if no bridge named \fBbr0\fR exists when \fBovs\-vsctl\fR
-initially connects to the database.
-.IP
-Consider specifying \fB\-\-timeout=0\fR along with
-\fB\-\-wait\-until\fR, to prevent \fBovs\-vsctl\fR from terminating
-after waiting only at most 5 seconds.
+.so lib/db-ctl-base.man

 .SH "EXAMPLES"
 Create a new bridge named br0 and add port eth0 to it:
 .IP
 .SH "EXAMPLES"
 Create a new bridge named br0 and add port eth0 to it:
 .IP


@@ -614,17 +574,16 @@ Create a new bridge named br0 and add port eth0 to it:
 .B "ovs\-vsctl add\-port br0 eth0"
 .PP
 Alternatively, perform both operations in a single atomic transaction:
 .B "ovs\-vsctl add\-port br0 eth0"
 .PP
 Alternatively, perform both operations in a single atomic transaction:

-.IP 
+.IP

 .B "ovs\-vsctl add\-br br0 \-\- add\-port br0 eth0"
 .PP
 Delete bridge \fBbr0\fR, reporting an error if it does not exist:
 .IP
 .B "ovs\-vsctl del\-br br0"
 .PP
 .B "ovs\-vsctl add\-br br0 \-\- add\-port br0 eth0"
 .PP
 Delete bridge \fBbr0\fR, reporting an error if it does not exist:
 .IP
 .B "ovs\-vsctl del\-br br0"
 .PP

-Delete bridge \fBbr0\fR if it exists (the \fB\-\-\fR is required to
-separate \fBdel\-br\fR's options from the global options):
+Delete bridge \fBbr0\fR if it exists:

 .IP
 .IP

-.B "ovs\-vsctl \-\- \-\-if\-exists del\-br br0"
+.B "ovs\-vsctl \-\-if\-exists del\-br br0"

 .PP
 Set the \fBqos\fR column of the \fBPort\fR record for \fBeth0\fR to
 point to a new \fBQoS\fR record, which in turn points with its queue 0
 .PP
 Set the \fBqos\fR column of the \fBPort\fR record for \fBeth0\fR to
 point to a new \fBQoS\fR record, which in turn points with its queue 0


@@ -641,6 +600,12 @@ access port for VLAN 10, and configure it with an IP address:
 .IP
 .B "ifconfig vlan10 192.168.0.123"
 .
 .IP
 .B "ifconfig vlan10 192.168.0.123"
 .

+.PP
+Add a GRE tunnel port \fBgre0\fR to remote IP address 1.2.3.4 to
+bridge \fBbr0\fR:
+.IP
+.B "ovs\-vsctl add\-port br0 gre0 \-\- set Interface gre0 type=gre options:remote_ip=1.2.3.4"
+.

 .SS "Port Mirroring"
 .PP
 Mirror all packets received or sent on \fBeth0\fR or \fBeth1\fR onto
 .SS "Port Mirroring"
 .PP
 Mirror all packets received or sent on \fBeth0\fR or \fBeth1\fR onto


@@ -658,10 +623,16 @@ ignored):
 .IP
 .B "\-\- \-\-id=@m create Mirror name=mymirror select-dst-port=@eth0,@eth1 select-src-port=@eth0,@eth1 output-port=@eth2"
 .PP
 .IP
 .B "\-\- \-\-id=@m create Mirror name=mymirror select-dst-port=@eth0,@eth1 select-src-port=@eth0,@eth1 output-port=@eth2"
 .PP

-Remove the mirror created above from \fBbr0\fR and destroy the Mirror
-record (to avoid having an unreferenced record in the database):
+Remove the mirror created above from \fBbr0\fR, which also destroys
+the Mirror record (since it is now unreferenced):
+.IP
+.B "ovs\-vsctl \-\- \-\-id=@rec get Mirror mymirror \(rs"

 .IP
 .IP

-.B "ovs\-vsctl destroy Mirror mymirror \-\- clear Bridge br0 mirrors"
+.B "\-\- remove Bridge br0 mirrors @rec"
+.PP
+The following simpler command also works:
+.IP
+.B "ovs\-vsctl clear Bridge br0 mirrors"

 .SS "Quality of Service (QoS)"
 .PP
 Create a \fBlinux\-htb\fR QoS record that points to a few queues and
 .SS "Quality of Service (QoS)"
 .PP
 Create a \fBlinux\-htb\fR QoS record that points to a few queues and


@@ -682,14 +653,25 @@ Deconfigure the QoS record above from \fBeth1\fR only:
 .B "ovs\-vsctl clear Port eth1 qos"
 .PP
 To deconfigure the QoS record from both \fBeth0\fR and \fBeth1\fR and
 .B "ovs\-vsctl clear Port eth1 qos"
 .PP
 To deconfigure the QoS record from both \fBeth0\fR and \fBeth1\fR and

-then delete the QoS record:
+then delete the QoS record (which must be done explicitly because
+unreferenced QoS records are not automatically destroyed):

 .IP
 .B "ovs\-vsctl \-\- destroy QoS eth0 \-\- clear Port eth0 qos \-\- clear Port eth1 qos"
 .PP
 (This command will leave two unreferenced Queue records in the
 database.  To delete them, use "\fBovs\-vsctl list Queue\fR" to find
 their UUIDs, then "\fBovs\-vsctl destroy Queue \fIuuid1\fR
 .IP
 .B "ovs\-vsctl \-\- destroy QoS eth0 \-\- clear Port eth0 qos \-\- clear Port eth1 qos"
 .PP
 (This command will leave two unreferenced Queue records in the
 database.  To delete them, use "\fBovs\-vsctl list Queue\fR" to find
 their UUIDs, then "\fBovs\-vsctl destroy Queue \fIuuid1\fR

-\fIuuid2\fR" to destroy each of them.)
+\fIuuid2\fR" to destroy each of them or use
+"\fBovs\-vsctl -- --all destroy Queue\fR" to delete all records.)
+.SS "Connectivity Monitoring"
+.PP
+Monitor connectivity to a remote maintenance point on eth0.
+.IP
+.B "ovs\-vsctl set Interface eth0 cfm_mpid=1"
+.PP
+Deconfigure connectivity monitoring from above:
+.IP
+.B "ovs\-vsctl clear Interface eth0 cfm_mpid"

 .SS "NetFlow"
 .PP
 Configure bridge \fBbr0\fR to send NetFlow records to UDP port 5566 on
 .SS "NetFlow"
 .PP
 Configure bridge \fBbr0\fR to send NetFlow records to UDP port 5566 on


@@ -704,10 +686,10 @@ instead use an active timeout of 60 seconds:
 .IP
 .B "ovs\-vsctl set NetFlow br0 active_timeout=60"
 .PP
 .IP
 .B "ovs\-vsctl set NetFlow br0 active_timeout=60"
 .PP

-Deconfigure the NetFlow settings from \fBbr0\fR and delete the NetFlow
-record (to avoid having an unreferenced record in the database):
+Deconfigure the NetFlow settings from \fBbr0\fR, which also destroys
+the NetFlow record (since it is now unreferenced):

 .IP
 .IP

-.B "ovs\-vsctl destroy NetFlow br0 \-\- clear Bridge br0 netflow"
+.B "ovs\-vsctl clear Bridge br0 netflow"

 .SS "sFlow"
 .PP
 Configure bridge \fBbr0\fR to send sFlow records to a collector on
 .SS "sFlow"
 .PP
 Configure bridge \fBbr0\fR to send sFlow records to a collector on


@@ -718,10 +700,184 @@ with specific sampling parameters:
 .IP
 .B "\-\- set Bridge br0 sflow=@s"
 .PP
 .IP
 .B "\-\- set Bridge br0 sflow=@s"
 .PP

-Deconfigure sFlow from br0 and destroy the sFlow record (to avoid
-having an unreferenced record in the database):
+Deconfigure sFlow from \fBbr0\fR, which also destroys the sFlow record
+(since it is now unreferenced):
+.IP
+.B "ovs\-vsctl \-\- clear Bridge br0 sflow"
+.SS "IPFIX"
+.PP
+Configure bridge \fBbr0\fR to send one IPFIX flow record per packet
+sample to UDP port 4739 on host 192.168.0.34, with Observation Domain
+ID 123 and Observation Point ID 456, a flow cache active timeout of 1
+minute (60 seconds), maximum flow cache size of 13 flows, and flows
+sampled on output port with tunnel info(sampling on input and output
+port is enabled by default if not disabled) :
+.IP
+.B "ovs\-vsctl \-\- set Bridge br0 ipfix=@i \(rs"
+.IP
+.B "\-\- \-\-id=@i create IPFIX targets=\(rs\(dq192.168.0.34:4739\(rs\(dq obs_domain_id=123 obs_point_id=456 cache_active_timeout=60 cache_max_flows=13 \(rs"
+.IP
+.B "other_config:enable-input-sampling=false other_config:enable-tunnel-sampling=true"
+.PP
+Deconfigure the IPFIX settings from \fBbr0\fR, which also destroys the
+IPFIX record (since it is now unreferenced):
+.IP
+.B "ovs\-vsctl clear Bridge br0 ipfix"
+.SS "802.1D Spanning Tree Protocol (STP)"
+.PP
+Configure bridge \fBbr0\fR to participate in an 802.1D spanning tree:
+.IP
+.B "ovs\-vsctl set Bridge br0 stp_enable=true"
+.PP
+Set the bridge priority of \fBbr0\fR to 0x7800:
+.IP
+.B "ovs\-vsctl set Bridge br0 other_config:stp-priority=0x7800"
+.PP
+Set the path cost of port \fBeth0\fR to 10:
+.IP
+.B "ovs\-vsctl set Port eth0 other_config:stp-path-cost=10"
+.PP
+Deconfigure STP from above:
+.IP
+.B "ovs\-vsctl set Bridge br0 stp_enable=false"
+.PP
+.SS "Multicast Snooping"
+.PP
+Configure bridge \fBbr0\fR to enable multicast snooping:
+.IP
+.B "ovs\-vsctl set Bridge br0 mcast_snooping_enable=true"
+.PP
+Set the multicast snooping aging time \fBbr0\fR to 300 seconds:
+.IP
+.B "ovs\-vsctl set Bridge br0 other_config:mcast-snooping-aging-time=300"
+.PP
+Set the multicast snooping table size \fBbr0\fR to 2048 entries:
+.IP
+.B "ovs\-vsctl set Bridge br0 other_config:mcast-snooping-table-size=2048"
+.PP
+Disable flooding of unregistered multicast packets to all ports. When
+set to \fBtrue\fR, the switch will send unregistered multicast packets only
+to ports connected to multicast routers. When it is set to \fBfalse\fR, the
+switch will send them to all ports. This command disables the flood of
+unregistered packets on bridge \fBbr0\fR.
+.IP
+.B "ovs\-vsctl set Bridge br0 other_config:mcast-snooping-disable-flood-unregistered=true"
+.PP
+Enable flooding of multicast packets (except Reports) on a specific port.
+.IP
+.B "ovs\-vsctl set Port eth1 other_config:mcast-snooping-flood=true"
+.PP
+Enable flooding of Reports on a specific port.
+.IP
+.B "ovs\-vsctl set Port eth1 other_config:mcast-snooping-flood-reports=true"
+.PP
+Deconfigure multicasting snooping from above:
+.IP
+.B "ovs\-vsctl set Bridge br0 mcast_snooping_enable=false"
+.PP
+.SS "802.1D-2004 Rapid Spanning Tree Protocol (RSTP)"
+.PP
+Configure bridge \fBbr0\fR to participate in an 802.1D-2004 Rapid Spanning Tree:
+.IP
+.B "ovs\-vsctl set Bridge br0 rstp_enable=true"
+.PP
+Set the bridge address of \fBbr0\fR to 00:aa:aa:aa:aa:aa :
+.IP
+.B "ovs\-vsctl set Bridge br0 other_config:rstp-address=00:aa:aa:aa:aa:aa"
+.PP
+Set the bridge priority of \fBbr0\fR to 0x7000. The value must be specified in
+decimal notation and should be a multiple of 4096 (if not, it is rounded down to
+the nearest multiple of 4096). The default priority value is 0x800 (32768).
+.IP
+.B "ovs\-vsctl set Bridge br0 other_config:rstp-priority=28672"
+.PP
+Set the bridge ageing time of \fBbr0\fR to 1000 s. The ageing time value should be
+between 10 s and 1000000 s. The default value is 300 s.
+.IP
+.B "ovs\-vsctl set Bridge br0 other_config:rstp-ageing-time=1000"
+.PP
+Set the bridge force protocol version of \fBbr0\fR to 0. The force protocol version
+has two acceptable values: 0 (STP compatibility mode) and 2 (normal operation).
+.IP
+.B "ovs\-vsctl set Bridge br0 other_config:rstp-force-protocol-version=0"
+.PP
+Set the bridge max age of \fBbr0\fR to 10 s. The max age value should be between 6 s
+and 40 s. The default value is 20 s.
+.IP
+.B "ovs\-vsctl set Bridge br0 other_config:rstp-max-age=10"
+.PP
+Set the bridge forward delay of \fBbr0\fR to 15 s.
+This value should be between 4 s and 30 s. The default value is 15 s.
+.IP
+.B "ovs\-vsctl set Bridge br0 other_config:rstp-forward-delay=15"
+.PP
+Set the bridge transmit hold count of \fBbr0\fR to 7 s. This value should be between
+1 s and 10 s. The default value is 6 s.
+.IP
+.B "ovs\-vsctl set Bridge br0 other_config:rstp-transmit-hold-count=7"
+.PP
+Enable RSTP on the Port \fBeth0\fR:
+.IP
+.B "ovs\-vsctl set Port eth0 other_config:rstp-enable=true"
+.PP
+Disable RSTP on the Port \fBeth0\fR:
+.IP
+.B "ovs\-vsctl set Port eth0 other_config:rstp-enable=false"
+.PP
+Set the priority of port \fBeth0\fR to 32. The value must be specified in
+decimal notation and should be a multiple of 16 (if not, it is rounded down to the
+nearest multiple of 16). The default priority value is 0x80 (128).
+.IP
+.B "ovs\-vsctl set Port eth0 other_config:rstp-port-priority=32"
+.PP
+Set the port number of port \fBeth0\fR to 3:
+.IP
+.B "ovs\-vsctl set Port eth0 other_config:rstp-port-num=3"
+.PP
+Set the path cost of port \fBeth0\fR to 150:
+.IP
+.B "ovs\-vsctl set Port eth0 other_config:rstp-path-cost=150"
+.PP
+Set the admin edge value of port \fBeth0\fR:
+.IP
+.B "ovs\-vsctl set Port eth0 other_config:rstp-port-admin-edge=true"
+.PP
+Set the auto edge value of port \fBeth0\fR:
+.IP
+.B "ovs\-vsctl set Port eth0 other_config:rstp-port-auto-edge=true"
+.PP
+Set the admin point to point MAC value of port \fBeth0\fR.  Acceptable
+values are \fB0\fR (not point-to-point), \fB1\fR (point-to-point, the
+default value) or \fB2\fR (automatic detection).  The auto-detection
+mode is not currently implemented, and the value \fB2\fR has the same
+effect of \fB0\fR (not point-to-point).
+.IP
+.B "ovs\-vsctl set Port eth0 other_config:rstp-admin-p2p-mac=1"
+.PP
+Set the admin port state value of port \fBeth0\fR.  \fBtrue\fR is the
+default value.
+.IP
+.B "ovs\-vsctl set Port eth0 other_config:rstp-admin-port-state=false"
+.PP
+Set the mcheck value of port \fBeth0\fR:
+.IP
+.B "ovs\-vsctl set Port eth0 other_config:rstp-port-mcheck=true"
+.PP
+Deconfigure RSTP from above:
+.IP
+.B "ovs\-vsctl set Bridge br0 rstp_enable=false"
+.PP
+.SS "OpenFlow Version"
+.PP
+Configure bridge \fBbr0\fR to support OpenFlow versions 1.0, 1.2, and
+1.3:
+.IP
+.B "ovs\-vsctl set bridge br0 protocols=OpenFlow10,OpenFlow12,OpenFlow13"
+.
+.SS "Flow Table Configuration"
+Limit flow table 0 on bridge br0 to a maximum of 100 flows:

 .IP
 .IP

-.B "ovs\-vsctl \-\- destroy sFlow br0 \-\- clear Bridge br0 sflow"
+.B "ovs\-vsctl \-\- \-\-id=@ft create Flow_Table flow_limit=100 overflow_policy=refuse \-\- set Bridge br0 flow_tables=0=@ft"

 .SH "EXIT STATUS"
 .IP "0"
 Successful program execution.
 .SH "EXIT STATUS"
 .IP "0"
 Successful program execution.


@@ -733,5 +889,5 @@ bridge that does not exist.
 .SH "SEE ALSO"
 .
 .BR ovsdb\-server (1),
 .SH "SEE ALSO"
 .
 .BR ovsdb\-server (1),

-.BR ovs\-vswitchd (8).
-\
+.BR ovs\-vswitchd (8),
+.BR ovs\-vswitchd.conf.db (5).