*/
#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/pinctrl/omap.h>
+#include <dt-bindings/pinctrl/dm814x.h>
#include "skeleton.dtsi"
serial2 = &uart3;
ethernet0 = &cpsw_emac0;
ethernet1 = &cpsw_emac1;
+ usb0 = &usb0;
+ usb1 = &usb1;
+ phy0 = &usb0_phy;
+ phy1 = &usb1_phy;
};
cpus {
ranges;
ti,hwmods = "l3_main";
+ usb: usb@47400000 {
+ compatible = "ti,am33xx-usb";
+ reg = <0x47400000 0x1000>;
+ ranges;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ti,hwmods = "usb_otg_hs";
+
+ usb0_phy: usb-phy@47401300 {
+ compatible = "ti,am335x-usb-phy";
+ reg = <0x47401300 0x100>;
+ reg-names = "phy";
+ ti,ctrl_mod = <&usb_ctrl_mod>;
+ };
+
+ usb0: usb@47401000 {
+ compatible = "ti,musb-am33xx";
+ reg = <0x47401400 0x400
+ 0x47401000 0x200>;
+ reg-names = "mc", "control";
+
+ interrupts = <18>;
+ interrupt-names = "mc";
+ dr_mode = "otg";
+ mentor,multipoint = <1>;
+ mentor,num-eps = <16>;
+ mentor,ram-bits = <12>;
+ mentor,power = <500>;
+ phys = <&usb0_phy>;
+
+ dmas = <&cppi41dma 0 0 &cppi41dma 1 0
+ &cppi41dma 2 0 &cppi41dma 3 0
+ &cppi41dma 4 0 &cppi41dma 5 0
+ &cppi41dma 6 0 &cppi41dma 7 0
+ &cppi41dma 8 0 &cppi41dma 9 0
+ &cppi41dma 10 0 &cppi41dma 11 0
+ &cppi41dma 12 0 &cppi41dma 13 0
+ &cppi41dma 14 0 &cppi41dma 0 1
+ &cppi41dma 1 1 &cppi41dma 2 1
+ &cppi41dma 3 1 &cppi41dma 4 1
+ &cppi41dma 5 1 &cppi41dma 6 1
+ &cppi41dma 7 1 &cppi41dma 8 1
+ &cppi41dma 9 1 &cppi41dma 10 1
+ &cppi41dma 11 1 &cppi41dma 12 1
+ &cppi41dma 13 1 &cppi41dma 14 1>;
+ dma-names =
+ "rx1", "rx2", "rx3", "rx4", "rx5", "rx6", "rx7",
+ "rx8", "rx9", "rx10", "rx11", "rx12", "rx13",
+ "rx14", "rx15",
+ "tx1", "tx2", "tx3", "tx4", "tx5", "tx6", "tx7",
+ "tx8", "tx9", "tx10", "tx11", "tx12", "tx13",
+ "tx14", "tx15";
+ };
+
+ usb1: usb@47401800 {
+ compatible = "ti,musb-am33xx";
+ reg = <0x47401c00 0x400
+ 0x47401800 0x200>;
+ reg-names = "mc", "control";
+ interrupts = <19>;
+ interrupt-names = "mc";
+ dr_mode = "otg";
+ mentor,multipoint = <1>;
+ mentor,num-eps = <16>;
+ mentor,ram-bits = <12>;
+ mentor,power = <500>;
+ phys = <&usb1_phy>;
+
+ dmas = <&cppi41dma 15 0 &cppi41dma 16 0
+ &cppi41dma 17 0 &cppi41dma 18 0
+ &cppi41dma 19 0 &cppi41dma 20 0
+ &cppi41dma 21 0 &cppi41dma 22 0
+ &cppi41dma 23 0 &cppi41dma 24 0
+ &cppi41dma 25 0 &cppi41dma 26 0
+ &cppi41dma 27 0 &cppi41dma 28 0
+ &cppi41dma 29 0 &cppi41dma 15 1
+ &cppi41dma 16 1 &cppi41dma 17 1
+ &cppi41dma 18 1 &cppi41dma 19 1
+ &cppi41dma 20 1 &cppi41dma 21 1
+ &cppi41dma 22 1 &cppi41dma 23 1
+ &cppi41dma 24 1 &cppi41dma 25 1
+ &cppi41dma 26 1 &cppi41dma 27 1
+ &cppi41dma 28 1 &cppi41dma 29 1>;
+ dma-names =
+ "rx1", "rx2", "rx3", "rx4", "rx5", "rx6", "rx7",
+ "rx8", "rx9", "rx10", "rx11", "rx12", "rx13",
+ "rx14", "rx15",
+ "tx1", "tx2", "tx3", "tx4", "tx5", "tx6", "tx7",
+ "tx8", "tx9", "tx10", "tx11", "tx12", "tx13",
+ "tx14", "tx15";
+ };
+
+ cppi41dma: dma-controller@47402000 {
+ compatible = "ti,am3359-cppi41";
+ reg = <0x47400000 0x1000
+ 0x47402000 0x1000
+ 0x47403000 0x1000
+ 0x47404000 0x4000>;
+ reg-names = "glue", "controller", "scheduler", "queuemgr";
+ interrupts = <17>;
+ interrupt-names = "glue";
+ #dma-cells = <2>;
+ #dma-channels = <30>;
+ #dma-requests = <256>;
+ };
+ };
+
/*
- * See TRM "Table 1-317. L4LS Instance Summary", just deduct
- * 0x1000 from the 1-317 addresses to get the device address
+ * See TRM "Table 1-317. L4LS Instance Summary" for hints.
+ * It shows the module target agent registers though, so the
+ * actual device is typically 0x1000 before the target agent
+ * except in cases where the module is larger than 0x1000.
*/
l4ls: l4ls@48000000 {
compatible = "ti,dm814-l4ls", "simple-bus";
interrupts = <65>;
ti,spi-num-cs = <4>;
ti,hwmods = "mcspi1";
- dmas = <&edma 16 &edma 17
- &edma 18 &edma 19>;
+ dmas = <&edma 16 0 &edma 17 0
+ &edma 18 0 &edma 19 0>;
dma-names = "tx0", "rx0", "tx1", "rx1";
};
reg = <0x20000 0x2000>;
clock-frequency = <48000000>;
interrupts = <72>;
- dmas = <&edma 26 &edma 27>;
+ dmas = <&edma 26 0 &edma 27 0>;
dma-names = "tx", "rx";
};
reg = <0x22000 0x2000>;
clock-frequency = <48000000>;
interrupts = <73>;
- dmas = <&edma 28 &edma 29>;
+ dmas = <&edma 28 0 &edma 29 0>;
dma-names = "tx", "rx";
};
reg = <0x24000 0x2000>;
clock-frequency = <48000000>;
interrupts = <74>;
- dmas = <&edma 30 &edma 31>;
+ dmas = <&edma 30 0 &edma 31 0>;
dma-names = "tx", "rx";
};
ti,hwmods = "timer3";
};
+ mmc1: mmc@60000 {
+ compatible = "ti,omap4-hsmmc";
+ ti,hwmods = "mmc1";
+ dmas = <&edma 24 0
+ &edma 25 0>;
+ dma-names = "tx", "rx";
+ interrupts = <64>;
+ interrupt-parent = <&intc>;
+ reg = <0x60000 0x1000>;
+ };
+
+ rtc: rtc@c0000 {
+ compatible = "ti,am3352-rtc", "ti,da830-rtc";
+ reg = <0xc0000 0x1000>;
+ interrupts = <75 76>;
+ ti,hwmods = "rtc";
+ };
+
+ mmc2: mmc@1d8000 {
+ compatible = "ti,omap4-hsmmc";
+ ti,hwmods = "mmc2";
+ dmas = <&edma 2 0
+ &edma 3 0>;
+ dma-names = "tx", "rx";
+ interrupts = <28>;
+ interrupt-parent = <&intc>;
+ reg = <0x1d8000 0x1000>;
+ };
+
control: control@140000 {
compatible = "ti,dm814-scm", "simple-bus";
- reg = <0x140000 0x16d000>;
+ reg = <0x140000 0x20000>;
#address-cells = <1>;
#size-cells = <1>;
- ranges = <0 0x160000 0x16d000>;
+ ranges = <0 0x140000 0x20000>;
scm_conf: scm_conf@0 {
compatible = "syscon";
};
};
+ usb_ctrl_mod: control@620 {
+ compatible = "ti,am335x-usb-ctrl-module";
+ reg = <0x620 0x10
+ 0x648 0x4>;
+ reg-names = "phy_ctrl", "wakeup";
+ };
+
+ edma_xbar: dma-router@f90 {
+ compatible = "ti,am335x-edma-crossbar";
+ reg = <0xf90 0x40>;
+ #dma-cells = <3>;
+ dma-requests = <32>;
+ dma-masters = <&edma>;
+ };
+
+ /*
+ * Note that silicon revision 2.1 and older
+ * require input enabled (bit 18 set) for all
+ * 3.3V I/Os to avoid cumulative hardware damage.
+ * For more info, see errata advisory 2.1.87.
+ * We leave bit 18 out of function-mask and rely
+ * on the bootloader for it.
+ */
pincntl: pinmux@800 {
compatible = "pinctrl-single";
- reg = <0x800 0xc38>;
+ reg = <0x800 0x438>;
#address-cells = <1>;
#size-cells = <0>;
pinctrl-single,register-width = <32>;
- pinctrl-single,function-mask = <0x300ff>;
+ pinctrl-single,function-mask = <0x307ff>;
+ };
+
+ usb1_phy: usb-phy@1b00 {
+ compatible = "ti,am335x-usb-phy";
+ reg = <0x1b00 0x100>;
+ reg-names = "phy";
+ ti,ctrl_mod = <&usb_ctrl_mod>;
};
};
prcm: prcm@180000 {
compatible = "ti,dm814-prcm", "simple-bus";
- reg = <0x180000 0x4000>;
+ reg = <0x180000 0x2000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x180000 0x2000>;
prcm_clocks: clocks {
#address-cells = <1>;
};
};
+ /* See TRM PLL_SUBSYS_BASE and "PLLSS Registers" */
pllss: pllss@1c5000 {
compatible = "ti,dm814-pllss", "simple-bus";
- reg = <0x1c5000 0x2000>;
+ reg = <0x1c5000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x1c5000 0x1000>;
pllss_clocks: clocks {
#address-cells = <1>;
reg = <0x48200000 0x1000>;
};
+ /* Board must configure evtmux with edma_xbar for EDMA */
+ mmc3: mmc@47810000 {
+ compatible = "ti,omap4-hsmmc";
+ ti,hwmods = "mmc3";
+ interrupts = <29>;
+ interrupt-parent = <&intc>;
+ reg = <0x47810000 0x1000>;
+ };
+
edma: edma@49000000 {
- compatible = "ti,edma3";
- ti,hwmods = "tpcc", "tptc0", "tptc1", "tptc2";
- reg = <0x49000000 0x10000>,
- <0x44e10f90 0x40>;
+ compatible = "ti,edma3-tpcc";
+ ti,hwmods = "tpcc";
+ reg = <0x49000000 0x10000>;
+ reg-names = "edma3_cc";
interrupts = <12 13 14>;
- #dma-cells = <1>;
+ interrupt-names = "edma3_ccint", "emda3_mperr",
+ "edma3_ccerrint";
+ dma-requests = <64>;
+ #dma-cells = <2>;
+
+ ti,tptcs = <&edma_tptc0 7>, <&edma_tptc1 5>,
+ <&edma_tptc2 3>, <&edma_tptc3 0>;
+
+ ti,edma-memcpy-channels = <20 21>;
+ };
+
+ edma_tptc0: tptc@49800000 {
+ compatible = "ti,edma3-tptc";
+ ti,hwmods = "tptc0";
+ reg = <0x49800000 0x100000>;
+ interrupts = <112>;
+ interrupt-names = "edma3_tcerrint";
+ };
+
+ edma_tptc1: tptc@49900000 {
+ compatible = "ti,edma3-tptc";
+ ti,hwmods = "tptc1";
+ reg = <0x49900000 0x100000>;
+ interrupts = <113>;
+ interrupt-names = "edma3_tcerrint";
+ };
+
+ edma_tptc2: tptc@49a00000 {
+ compatible = "ti,edma3-tptc";
+ ti,hwmods = "tptc2";
+ reg = <0x49a00000 0x100000>;
+ interrupts = <114>;
+ interrupt-names = "edma3_tcerrint";
+ };
+
+ edma_tptc3: tptc@49b00000 {
+ compatible = "ti,edma3-tptc";
+ ti,hwmods = "tptc3";
+ reg = <0x49b00000 0x100000>;
+ interrupts = <115>;
+ interrupt-names = "edma3_tcerrint";
};
/* See TRM "Table 1-318. L4HS Instance Summary" */
reg-names = "gmii-sel";
};
};
+
+ gpmc: gpmc@50000000 {
+ compatible = "ti,am3352-gpmc";
+ ti,hwmods = "gpmc";
+ ti,no-idle-on-init;
+ reg = <0x50000000 0x2000>;
+ interrupts = <100>;
+ gpmc,num-cs = <7>;
+ gpmc,num-waitpins = <2>;
+ #address-cells = <2>;
+ #size-cells = <1>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
};
};
projects / cascardo / linux.git / blobdiff