ARM: dts: sun5i: q8-common: Enable USB-based WiFi

[cascardo/linux.git] / arch / arm / boot / dts / sun5i-q8-common.dtsi

diff --git a/arch/arm/boot/dts/sun5i-q8-common.dtsi b/arch/arm/boot/dts/sun5i-q8-common.dtsi
index 0f7ec63..a5de28d 100644 (file)
--- a/arch/arm/boot/dts/sun5i-q8-common.dtsi
+++ b/arch/arm/boot/dts/sun5i-q8-common.dtsi
@@ -59,6 +59,36 @@
        chosen {
                stdout-path = "serial0:115200n8";
        };
+
+       panel: panel {
+               compatible = "urt,umsh-8596md-t", "simple-panel";
+               #address-cells = <1>;
+               #size-cells = <0>;
+
+               port@0 {
+                       reg = <0>;
+                       /* TODO: lcd panel uses axp gpio0 as enable pin */
+                       backlight = <&backlight>;
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+
+                       panel_input: endpoint@0 {
+                               reg = <0>;
+                               remote-endpoint = <&tcon0_out_lcd>;
+                       };
+               };
+       };
+};
+
+&be0 {
+       status = "okay";
+};
+
+&codec {
+       pinctrl-names = "default";
+       pinctrl-0 = <&codec_pa_pin>;
+       allwinner,pa-gpios = <&pio 6 10 GPIO_ACTIVE_HIGH>; /* PG10 */
+       status = "okay";
 };
 
 &cpu0 {
@@ -100,6 +130,13 @@
 };
 
 &pio {
+       codec_pa_pin: codec_pa_pin@0 {
+               allwinner,pins = "PG10";
+               allwinner,function = "gpio_out";
+               allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+               allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+       };
+
        mmc0_cd_pin_q8: mmc0_cd_pin@0 {
                allwinner,pins = "PG0";
                allwinner,function = "gpio_in";
@@ -154,11 +191,30 @@
        regulator-name = "avcc";
 };
 
+&reg_ldo3 {
+       regulator-min-microvolt = <3300000>;
+       regulator-max-microvolt = <3300000>;
+       regulator-name = "vcc-wifi";
+};
+
 &reg_usb0_vbus {
        gpio = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */
        status = "okay";
 };
 
+&tcon0 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&lcd_rgb666_pins>;
+       status = "okay";
+};
+
+&tcon0_out {
+       tcon0_out_lcd: endpoint@0 {
+               reg = <0>;
+               remote-endpoint = <&panel_input>;
+       };
+};
+
 &uart1 {
        pinctrl-names = "default";
        pinctrl-0 = <&uart1_pins_b>;
@@ -181,5 +237,6 @@
        usb0_vbus_det-gpio = <&pio 6 1 GPIO_ACTIVE_HIGH>; /* PG1 */
        usb0_vbus_power-supply = <&usb_power_supply>;
        usb0_vbus-supply = <&reg_usb0_vbus>;
+       usb1_vbus-supply = <&reg_ldo3>;
        status = "okay";
 };