ARM: dts: sun9i: a80-optimus: Order nodes by alphabetical order

[cascardo/linux.git] / arch / arm / boot / dts / sun9i-a80-optimus.dts

diff --git a/arch/arm/boot/dts/sun9i-a80-optimus.dts b/arch/arm/boot/dts/sun9i-a80-optimus.dts
index d7a20d9..7fd22e8 100644 (file)
--- a/arch/arm/boot/dts/sun9i-a80-optimus.dts
+++ b/arch/arm/boot/dts/sun9i-a80-optimus.dts
@@ -44,7 +44,6 @@
 
 /dts-v1/;
 #include "sun9i-a80.dtsi"
-#include "sunxi-common-regulators.dtsi"
 
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/pinctrl/sun4i-a10.h>
@@ -85,6 +84,17 @@
                };
        };
 
+       reg_usb1_vbus: usb1-vbus {
+               compatible = "regulator-fixed";
+               pinctrl-names = "default";
+               pinctrl-0 = <&usb1_vbus_pin_optimus>;
+               regulator-name = "usb1-vbus";
+               regulator-min-microvolt = <5000000>;
+               regulator-max-microvolt = <5000000>;
+               enable-active-high;
+               gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
+       };
+
        reg_usb3_vbus: usb3-vbus {
                compatible = "regulator-fixed";
                pinctrl-names = "default";
@@ -109,6 +119,31 @@
        status = "okay";
 };
 
+&mmc0 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&mmc0_pins>, <&mmc0_cd_pin_optimus>;
+       vmmc-supply = <&reg_dcdc1>;
+       bus-width = <4>;
+       cd-gpios = <&pio 7 18 GPIO_ACTIVE_HIGH>; /* PH8 */
+       cd-inverted;
+       status = "okay";
+};
+
+&mmc2 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&mmc2_8bit_pins>;
+       vmmc-supply = <&reg_dcdc1>;
+       bus-width = <8>;
+       non-removable;
+       cap-mmc-hw-reset;
+       status = "okay";
+};
+
+&mmc2_8bit_pins {
+       /* Increase drive strength for DDR modes */
+       allwinner,drive = <SUN4I_PINCTRL_40_MA>;
+};
+
 &ohci0 {
        status = "okay";
 };
@@ -147,37 +182,6 @@
        };
 };
 
-&mmc0 {
-       pinctrl-names = "default";
-       pinctrl-0 = <&mmc0_pins>, <&mmc0_cd_pin_optimus>;
-       vmmc-supply = <&reg_vcc3v0>;
-       bus-width = <4>;
-       cd-gpios = <&pio 7 18 GPIO_ACTIVE_HIGH>; /* PH8 */
-       cd-inverted;
-       status = "okay";
-};
-
-&mmc2 {
-       pinctrl-names = "default";
-       pinctrl-0 = <&mmc2_8bit_pins>;
-       vmmc-supply = <&reg_vcc3v0>;
-       bus-width = <8>;
-       non-removable;
-       cap-mmc-hw-reset;
-       status = "okay";
-};
-
-&mmc2_8bit_pins {
-       /* Increase drive strength for DDR modes */
-       allwinner,drive = <SUN4I_PINCTRL_40_MA>;
-};
-
-&reg_usb1_vbus {
-       pinctrl-0 = <&usb1_vbus_pin_optimus>;
-       gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
-       status = "okay";
-};
-
 &r_ir {
        status = "okay";
 };
@@ -193,8 +197,135 @@
 
 &r_rsb {
        status = "okay";
+
+       axp809: pmic@3a3 {
+               reg = <0x3a3>;
+               interrupt-parent = <&nmi_intc>;
+               interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+
+               regulators {
+                       reg_aldo1: aldo1 {
+                               /*
+                                * TODO: This should be handled by the
+                                * USB PHY driver.
+                                */
+                               regulator-always-on;
+                               regulator-min-microvolt = <3000000>;
+                               regulator-max-microvolt = <3000000>;
+                               regulator-name = "vcc33-usbh";
+                       };
+
+                       reg_aldo2: aldo2 {
+                               regulator-min-microvolt = <1800000>;
+                               regulator-max-microvolt = <1800000>;
+                               regulator-name = "vcc-pb-io-cam";
+                       };
+
+                       aldo3 {
+                               /* unused */
+                       };
+
+                       reg_dc5ldo: dc5ldo {
+                               regulator-always-on;
+                               regulator-min-microvolt = <800000>;
+                               regulator-max-microvolt = <1100000>;
+                               regulator-name = "vdd-cpus-09-usbh";
+                       };
+
+                       reg_dcdc1: dcdc1 {
+                               regulator-always-on;
+                               regulator-min-microvolt = <3000000>;
+                               regulator-max-microvolt = <3000000>;
+                               regulator-name = "vcc-3v";
+                       };
+
+                       reg_dcdc2: dcdc2 {
+                               regulator-min-microvolt = <800000>;
+                               regulator-max-microvolt = <1100000>;
+                               regulator-name = "vdd-gpu";
+                       };
+
+                       reg_dcdc3: dcdc3 {
+                               regulator-always-on;
+                               regulator-min-microvolt = <800000>;
+                               regulator-max-microvolt = <1100000>;
+                               regulator-name = "vdd-cpua";
+                       };
+
+                       reg_dcdc4: dcdc4 {
+                               regulator-always-on;
+                               regulator-min-microvolt = <800000>;
+                               regulator-max-microvolt = <1100000>;
+                               regulator-name = "vdd-sys-usb0-hdmi";
+                       };
+
+                       reg_dcdc5: dcdc5 {
+                               regulator-always-on;
+                               regulator-min-microvolt = <1425000>;
+                               regulator-max-microvolt = <1575000>;
+                               regulator-name = "vcc-dram";
+                       };
+
+                       reg_dldo1: dldo1 {
+                               /*
+                                * The WiFi chip supports a wide range
+                                * (3.0 ~ 4.8V) of voltages, and so does
+                                * this regulator (3.0 ~ 4.2V), but
+                                * Allwinner SDK always sets it to 3.3V.
+                                */
+                               regulator-min-microvolt = <3300000>;
+                               regulator-max-microvolt = <3300000>;
+                               regulator-name = "vcc-wifi";
+                       };
+
+                       reg_dldo2: dldo2 {
+                               regulator-always-on;
+                               regulator-min-microvolt = <3000000>;
+                               regulator-max-microvolt = <3000000>;
+                               regulator-name = "vcc-pl";
+                       };
+
+                       reg_eldo1: eldo1 {
+                               regulator-min-microvolt = <1200000>;
+                               regulator-max-microvolt = <1200000>;
+                               regulator-name = "vcc-dvdd-cam";
+                       };
+
+                       reg_eldo2: eldo2 {
+                               regulator-min-microvolt = <1800000>;
+                               regulator-max-microvolt = <1800000>;
+                               regulator-name = "vcc-pe";
+                       };
+
+                       reg_eldo3: eldo3 {
+                               regulator-always-on;
+                               regulator-min-microvolt = <3000000>;
+                               regulator-max-microvolt = <3000000>;
+                               regulator-name = "vcc-pm-codec-io1";
+                       };
+
+                       reg_ldo_io0: ldo_io0 {
+                               regulator-always-on;
+                               regulator-min-microvolt = <3000000>;
+                               regulator-max-microvolt = <3000000>;
+                               regulator-name = "vcc-pg";
+                       };
+
+                       reg_ldo_io1: ldo_io1 {
+                               regulator-min-microvolt = <2500000>;
+                               regulator-max-microvolt = <2500000>;
+                               regulator-name = "vcc-pa-gmac-2v5";
+                       };
+
+                       reg_rtc_ldo: rtc_ldo {
+                               regulator-name = "vcc-rtc-vdd1v8-io";
+                       };
+               };
+       };
 };
 
+#include "axp809.dtsi"
+
 &uart0 {
        pinctrl-names = "default";
        pinctrl-0 = <&uart0_pins_a>;