if (!oh->main_clk)
return 0;
- oh->_clk = omap_clk_get_by_name(oh->main_clk);
- if (!oh->_clk) {
+ oh->_clk = clk_get(NULL, oh->main_clk);
+ if (IS_ERR(oh->_clk)) {
pr_warning("omap_hwmod: %s: cannot clk_get main_clk %s\n",
oh->name, oh->main_clk);
return -EINVAL;
}
+ /*
+ * HACK: This needs a re-visit once clk_prepare() is implemented
+ * to do something meaningful. Today its just a no-op.
+ * If clk_prepare() is used at some point to do things like
+ * voltage scaling etc, then this would have to be moved to
+ * some point where subsystems like i2c and pmic become
+ * available.
+ */
+ clk_prepare(oh->_clk);
if (!oh->_clk->clkdm)
- pr_warning("omap_hwmod: %s: missing clockdomain for %s.\n",
- oh->main_clk, oh->_clk->name);
+ pr_debug("omap_hwmod: %s: missing clockdomain for %s.\n",
+ oh->name, oh->main_clk);
return ret;
}
if (!os->clk)
continue;
- c = omap_clk_get_by_name(os->clk);
- if (!c) {
+ c = clk_get(NULL, os->clk);
+ if (IS_ERR(c)) {
pr_warning("omap_hwmod: %s: cannot clk_get interface_clk %s\n",
oh->name, os->clk);
ret = -EINVAL;
}
os->_clk = c;
+ /*
+ * HACK: This needs a re-visit once clk_prepare() is implemented
+ * to do something meaningful. Today its just a no-op.
+ * If clk_prepare() is used at some point to do things like
+ * voltage scaling etc, then this would have to be moved to
+ * some point where subsystems like i2c and pmic become
+ * available.
+ */
+ clk_prepare(os->_clk);
}
return ret;
int ret = 0;
for (i = oh->opt_clks_cnt, oc = oh->opt_clks; i > 0; i--, oc++) {
- c = omap_clk_get_by_name(oc->clk);
- if (!c) {
+ c = clk_get(NULL, oc->clk);
+ if (IS_ERR(c)) {
pr_warning("omap_hwmod: %s: cannot clk_get opt_clk %s\n",
oh->name, oc->clk);
ret = -EINVAL;
}
oc->_clk = c;
+ /*
+ * HACK: This needs a re-visit once clk_prepare() is implemented
+ * to do something meaningful. Today its just a no-op.
+ * If clk_prepare() is used at some point to do things like
+ * voltage scaling etc, then this would have to be moved to
+ * some point where subsystems like i2c and pmic become
+ * available.
+ */
+ clk_prepare(oc->_clk);
}
return ret;
for (i = oh->opt_clks_cnt, oc = oh->opt_clks; i > 0; i--, oc++)
if (oc->_clk) {
pr_debug("omap_hwmod: enable %s:%s\n", oc->role,
- oc->_clk->name);
+ __clk_get_name(oc->_clk));
clk_enable(oc->_clk);
}
}
for (i = oh->opt_clks_cnt, oc = oh->opt_clks; i > 0; i--, oc++)
if (oc->_clk) {
pr_debug("omap_hwmod: disable %s:%s\n", oc->role,
- oc->_clk->name);
+ __clk_get_name(oc->_clk));
clk_disable(oc->_clk);
}
}
*/
static int _omap4_wait_target_disable(struct omap_hwmod *oh)
{
- if (!oh || !oh->clkdm)
+ if (!oh)
return -EINVAL;
- if (oh->_int_flags & _HWMOD_NO_MPU_PORT)
+ if (oh->_int_flags & _HWMOD_NO_MPU_PORT || !oh->clkdm)
return 0;
if (oh->flags & HWMOD_NO_IDLEST)
*/
static int _init_clkdm(struct omap_hwmod *oh)
{
- if (!oh->clkdm_name)
+ if (!oh->clkdm_name) {
+ pr_debug("omap_hwmod: %s: missing clockdomain\n", oh->name);
return 0;
+ }
oh->clkdm = clkdm_lookup(oh->clkdm_name);
if (!oh->clkdm) {
{
struct omap_hwmod_rst_info ohri;
int ret = -EINVAL;
+ int hwsup = 0;
if (!oh)
return -EINVAL;
if (IS_ERR_VALUE(ret))
return ret;
+ if (oh->clkdm) {
+ /*
+ * A clockdomain must be in SW_SUP otherwise reset
+ * might not be completed. The clockdomain can be set
+ * in HW_AUTO only when the module become ready.
+ */
+ hwsup = clkdm_in_hwsup(oh->clkdm);
+ ret = clkdm_hwmod_enable(oh->clkdm, oh);
+ if (ret) {
+ WARN(1, "omap_hwmod: %s: could not enable clockdomain %s: %d\n",
+ oh->name, oh->clkdm->name, ret);
+ return ret;
+ }
+ }
+
+ _enable_clocks(oh);
+ if (soc_ops.enable_module)
+ soc_ops.enable_module(oh);
+
ret = soc_ops.deassert_hardreset(oh, &ohri);
+
+ if (soc_ops.disable_module)
+ soc_ops.disable_module(oh);
+ _disable_clocks(oh);
+
if (ret == -EBUSY)
pr_warning("omap_hwmod: %s: failed to hardreset\n", oh->name);
+ if (!ret) {
+ /*
+ * Set the clockdomain to HW_AUTO, assuming that the
+ * previous state was HW_AUTO.
+ */
+ if (oh->clkdm && hwsup)
+ clkdm_allow_idle(oh->clkdm);
+ } else {
+ if (oh->clkdm)
+ clkdm_hwmod_disable(oh->clkdm, oh);
+ }
+
return ret;
}
}
/**
- * _are_any_hardreset_lines_asserted - return true if part of @oh is hard-reset
+ * _are_all_hardreset_lines_asserted - return true if the @oh is hard-reset
* @oh: struct omap_hwmod *
*
- * If any hardreset line associated with @oh is asserted, then return true.
- * Otherwise, if @oh has no hardreset lines associated with it, or if
- * no hardreset lines associated with @oh are asserted, then return false.
+ * If all hardreset lines associated with @oh are asserted, then return true.
+ * Otherwise, if part of @oh is out hardreset or if no hardreset lines
+ * associated with @oh are asserted, then return false.
* This function is used to avoid executing some parts of the IP block
- * enable/disable sequence if a hardreset line is set.
+ * enable/disable sequence if its hardreset line is set.
*/
-static bool _are_any_hardreset_lines_asserted(struct omap_hwmod *oh)
+static bool _are_all_hardreset_lines_asserted(struct omap_hwmod *oh)
{
- int i;
+ int i, rst_cnt = 0;
if (oh->rst_lines_cnt == 0)
return false;
for (i = 0; i < oh->rst_lines_cnt; i++)
if (_read_hardreset(oh, oh->rst_lines[i].name) > 0)
- return true;
+ rst_cnt++;
+
+ if (oh->rst_lines_cnt == rst_cnt)
+ return true;
return false;
}
if (!oh->clkdm || !oh->prcm.omap4.modulemode)
return -EINVAL;
+ /*
+ * Since integration code might still be doing something, only
+ * disable if all lines are under hardreset.
+ */
+ if (!_are_all_hardreset_lines_asserted(oh))
+ return 0;
+
pr_debug("omap_hwmod: %s: %s\n", oh->name, __func__);
omap4_cminst_module_disable(oh->clkdm->prcm_partition,
oh->clkdm->clkdm_offs,
oh->prcm.omap4.clkctrl_offs);
- if (_are_any_hardreset_lines_asserted(oh))
- return 0;
-
v = _omap4_wait_target_disable(oh);
if (v)
pr_warn("omap_hwmod: %s: _wait_target_disable failed\n",
am33xx_cm_module_disable(oh->clkdm->cm_inst, oh->clkdm->clkdm_offs,
oh->prcm.omap4.clkctrl_offs);
- if (_are_any_hardreset_lines_asserted(oh))
+ if (_are_all_hardreset_lines_asserted(oh))
return 0;
v = _am33xx_wait_target_disable(oh);
}
/*
- * If an IP block contains HW reset lines and any of them are
+ * If an IP block contains HW reset lines and all of them are
* asserted, we let integration code associated with that
* block handle the enable. We've received very little
* information on what those driver authors need, and until
* posted to the public lists, this is probably the best we
* can do.
*/
- if (_are_any_hardreset_lines_asserted(oh))
+ if (_are_all_hardreset_lines_asserted(oh))
return 0;
/* Mux pins for device runtime if populated */
* completely the module. The clockdomain can be set
* in HW_AUTO only when the module become ready.
*/
- hwsup = clkdm_in_hwsup(oh->clkdm);
+ hwsup = clkdm_in_hwsup(oh->clkdm) &&
+ !clkdm_missing_idle_reporting(oh->clkdm);
r = clkdm_hwmod_enable(oh->clkdm, oh);
if (r) {
WARN(1, "omap_hwmod: %s: could not enable clockdomain %s: %d\n",
return -EINVAL;
}
- if (_are_any_hardreset_lines_asserted(oh))
+ if (_are_all_hardreset_lines_asserted(oh))
return 0;
if (oh->class->sysc)
return -EINVAL;
}
- if (_are_any_hardreset_lines_asserted(oh))
+ if (_are_all_hardreset_lines_asserted(oh))
return 0;
pr_debug("omap_hwmod: %s: disabling\n", oh->name);
*/
static int _omap4_wait_target_ready(struct omap_hwmod *oh)
{
- if (!oh || !oh->clkdm)
+ if (!oh)
return -EINVAL;
- if (oh->flags & HWMOD_NO_IDLEST)
+ if (oh->flags & HWMOD_NO_IDLEST || !oh->clkdm)
return 0;
if (!_find_mpu_rt_port(oh))
projects / cascardo / linux.git / blobdiff