#
# Modified to make a template file for a multi-binary package with separated
# build-arch and build-indep targets by Bill Allombert 2001
+#export DH_VERBOSE=1
-# Official build number. Leave set to 0 if not an official build.
-BUILD_NUMBER = 0
+PACKAGE=openvswitch
+PACKAGE_DKMS=openvswitch-datapath-dkms
+DEB_UPSTREAM_VERSION=$(shell dpkg-parsechangelog | sed -rne 's,^Version: ([0-9]:)*([^-]+).*,\2,p')
ifneq (,$(filter parallel=%,$(DEB_BUILD_OPTIONS)))
-NUMJOBS = $(patsubst parallel=%,%,$(filter parallel=%,$(DEB_BUILD_OPTIONS)))
-MAKEFLAGS += -j$(NUMJOBS)
-endif
-
-ifneq (,$(filter noopt,$(DEB_BUILD_OPTIONS)))
-CFLAGS += -O0
+PARALLEL = -j$(patsubst parallel=%,%,$(filter parallel=%,$(DEB_BUILD_OPTIONS)))
else
-CFLAGS += -O2
+PARALLEL =
endif
-configure: configure-stamp
-configure-stamp:
- dh_testdir
- test -e configure || ./boot.sh
- test -d _debian || mkdir _debian
- echo $$CC
- cd _debian && ( \
- test -e Makefile || \
- ../configure --prefix=/usr --localstatedir=/var --enable-ssl \
- --with-build-number=$(BUILD_NUMBER) \
- CFLAGS="$(CFLAGS)" $(DATAPATH_CONFIGURE_OPTS))
- touch configure-stamp
-
-#Architecture
-build: build-arch build-indep
-
-build-arch: build-arch-stamp
-build-arch-stamp: configure-stamp
- $(MAKE) -C _debian
+%:
+ dh $@ --with autoreconf,python2 --parallel
+
+# use --as-needed only if supported by dh-autoreconf (to simplify backporting)
+DH_AS_NEEDED=$(shell dpkg --compare-versions $$(dpkg --status dh-autoreconf | grep Version | cut -d' ' -f2) ge 6 && echo --as-needed)
+override_dh_autoreconf:
+ dh_autoreconf $(DH_AS_NEEDED)
+
+override_dh_auto_configure:
+ dh_auto_configure -- --enable-ssl $(DATAPATH_CONFIGURE_OPTS)
+
+override_dh_auto_test:
ifeq (,$(filter nocheck,$(DEB_BUILD_OPTIONS)))
- $(MAKE) -C _debian check
+ if $(MAKE) check TESTSUITEFLAGS='$(PARALLEL)' RECHECK=yes; then :; \
+ else \
+ cat tests/testsuite.log; \
+ exit 1; \
+ fi
endif
- touch $@
-
-build-indep: build-indep-stamp
-build-indep-stamp: configure-stamp
- $(MAKE) -C _debian dist distdir=openvswitch
- touch $@
-
-clean:
- dh_testdir
- dh_testroot
- rm -f build-arch-stamp build-indep-stamp configure-stamp
- rm -rf _debian
- [ ! -f Makefile ] || $(MAKE) distclean
- dh_clean
- debconf-updatepo
-
-install: install-indep install-arch
-install-indep: build-indep
- dh_testdir
- dh_testroot
- dh_clean -k -i
- dh_installdirs -i
- dh_install -i
- sed 's/^BUILD_NUMBER = .*/BUILD_NUMBER = $(BUILD_NUMBER)/' \
- < debian/rules.modules \
- > debian/openvswitch-datapath-source/usr/src/modules/openvswitch-datapath/debian/rules
+
+override_dh_auto_build:
+ dh_auto_build -- dist distdir=openvswitch
+
+override_dh_auto_clean:
+ rm -f python/ovs/*.pyc python/ovs/db/*.pyc
+ dh_auto_clean
+
+override_dh_install:
+ dh_install
+ # openvswitch-switch
+ cp debian/openvswitch-switch.template debian/openvswitch-switch/usr/share/openvswitch/switch/default.template
+
+ # ovn-host
+ cp debian/ovn-host.template debian/ovn-host/usr/share/ovn/host/default.template
+
+ # ovn-central
+ cp debian/ovn-central.template debian/ovn-central/usr/share/ovn/central/default.template
+
+ # openvswitch-datapath-source
+ cp debian/rules.modules debian/openvswitch-datapath-source/usr/src/modules/openvswitch-datapath/debian/rules
chmod 755 debian/openvswitch-datapath-source/usr/src/modules/openvswitch-datapath/debian/rules
cd debian/openvswitch-datapath-source/usr/src && tar -c modules | bzip2 -9 > openvswitch-datapath.tar.bz2 && rm -rf modules
- install -m644 debian/openvswitch-pki-server.apache2 debian/openvswitch-pki-server/etc/apache2/sites-available/openvswitch-pki
- install -m1777 -d debian/corekeeper/var/log/core
-
-install-arch: build-arch
- dh_testdir
- dh_testroot
- dh_clean -k -s
- dh_installdirs -s
- $(MAKE) -C _debian DESTDIR=$(CURDIR)/debian/openvswitch install
- cp debian/openvswitch-switch-config.overrides debian/openvswitch-switch-config/usr/share/lintian/overrides/openvswitch-switch-config
- cp debian/openvswitch-switch.template debian/openvswitch-switch/usr/share/openvswitch/switch/default.template
- dh_install -s
-
-# Must not depend on anything. This is to be called by
-# binary-arch/binary-indep
-# in another 'make' thread.
-binary-common:
- dh_testdir
- dh_testroot
- dh_installchangelogs
- dh_installdocs
- dh_installexamples
- dh_installdebconf
- dh_installlogrotate
- dh_installinit
- dh_installcron
- dh_installman
- dh_link
+
+ # openvswitch-datapath-dkms
+ # setup the dirs
+ dh_installdirs -p$(PACKAGE_DKMS) usr/src/$(PACKAGE)-$(DEB_UPSTREAM_VERSION)
+
+ # copy the source
+ cd debian/$(PACKAGE_DKMS)/usr/src/$(PACKAGE)-$(DEB_UPSTREAM_VERSION) && tar xvzf $(CURDIR)/openvswitch.tar.gz && mv openvswitch/* openvswitch/.[a-z]* . && rmdir openvswitch
+
+ # check we can get kernel module names
+ $(MAKE) -C datapath print-build-modules
+
+ # Prepare dkms.conf from the dkms.conf.in template
+ sed "s/__VERSION__/$(DEB_UPSTREAM_VERSION)/g; s/__MODULES__/$(shell $(MAKE) -C datapath print-build-modules | grep -v make)/" debian/dkms.conf.in > debian/$(PACKAGE_DKMS)/usr/src/$(PACKAGE)-$(DEB_UPSTREAM_VERSION)/dkms.conf
+
+ # We don't need the debian folder in there, just upstream sources...
+ rm -rf debian/$(PACKAGE_DKMS)/usr/src/$(PACKAGE)-$(DEB_UPSTREAM_VERSION)/debian
+ # We don't need the rhel stuff in there either
+ rm -rf debian/$(PACKAGE_DKMS)/usr/src/$(PACKAGE)-$(DEB_UPSTREAM_VERSION)/rhel
+ # And we should also clean useless license files, which are already
+ # described in our debian/copyright anyway.
+ rm -f debian/$(PACKAGE_DKMS)/usr/src/$(PACKAGE)-$(DEB_UPSTREAM_VERSION)/COPYING \
+ debian/$(PACKAGE_DKMS)/usr/src/$(PACKAGE)-$(DEB_UPSTREAM_VERSION)/xenserver/LICENSE
+
+override_dh_installinit:
+ dh_installinit -R
+
+override_dh_strip:
dh_strip --dbg-package=openvswitch-dbg
- dh_compress
- dh_fixperms -X var/log/core
- dh_perl
- dh_makeshlibs
- dh_installdeb
- dh_shlibdeps
- dh_gencontrol
- dh_md5sums
- dh_builddeb
-binary-indep: install-indep
- $(MAKE) -f debian/rules DH_OPTIONS=-i binary-common
-binary-arch: install-arch
- $(MAKE) -f debian/rules DH_OPTIONS=-s binary-common
-
-binary: binary-arch binary-indep
-.PHONY: build clean binary-indep binary-arch binary install install-indep install-arch configure