*
*/
+/*
+ Theory of operation
+ -------------------
+
+ The SX4 (PDC20621) chip features a single Host DMA (HDMA) copy
+ engine, DIMM memory, and four ATA engines (one per SATA port).
+ Data is copied to/from DIMM memory by the HDMA engine, before
+ handing off to one (or more) of the ATA engines. The ATA
+ engines operate solely on DIMM memory.
+
+ The SX4 behaves like a PATA chip, with no SATA controls or
+ knowledge whatsoever, leading to the presumption that
+ PATA<->SATA bridges exist on SX4 boards, external to the
+ PDC20621 chip itself.
+
+ The chip is quite capable, supporting an XOR engine and linked
+ hardware commands (permits a string to transactions to be
+ submitted and waited-on as a single unit), and an optional
+ microprocessor.
+
+ The limiting factor is largely software. This Linux driver was
+ written to multiplex the single HDMA engine to copy disk
+ transactions into a fixed DIMM memory space, from where an ATA
+ engine takes over. As a result, each WRITE looks like this:
+
+ submit HDMA packet to hardware
+ hardware copies data from system memory to DIMM
+ hardware raises interrupt
+
+ submit ATA packet to hardware
+ hardware executes ATA WRITE command, w/ data in DIMM
+ hardware raises interrupt
+
+ and each READ looks like this:
+
+ submit ATA packet to hardware
+ hardware executes ATA READ command, w/ data in DIMM
+ hardware raises interrupt
+
+ submit HDMA packet to hardware
+ hardware copies data from DIMM to system memory
+ hardware raises interrupt
+
+ This is a very slow, lock-step way of doing things that can
+ certainly be improved by motivated kernel hackers.
+
+ */
+
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/pci.h>
#include "sata_promise.h"
#define DRV_NAME "sata_sx4"
-#define DRV_VERSION "0.11"
+#define DRV_VERSION "0.12"
enum {
PDC_INT_SEQMASK = 0x40, /* Mask of asserted SEQ INTs */
PDC_HDMA_CTLSTAT = 0x12C, /* Host DMA control / status */
+ PDC_CTLSTAT = 0x60, /* IDEn control / status */
+
PDC_20621_SEQCTL = 0x400,
PDC_20621_SEQMASK = 0x480,
PDC_20621_GENERAL_CTL = 0x484,
PDC_MASK_INT = (1 << 10), /* HDMA/ATA mask int */
PDC_RESET = (1 << 11), /* HDMA/ATA reset */
+ PDC_DMA_ENABLE = (1 << 7), /* DMA start/stop */
PDC_MAX_HDMA = 32,
PDC_HDMA_Q_MASK = (PDC_MAX_HDMA - 1),
};
static const struct ata_port_operations pdc_20621_ops = {
- .port_disable = ata_port_disable,
.tf_load = pdc_tf_load_mmio,
.tf_read = ata_tf_read,
.check_status = ata_check_status,
.eng_timeout = pdc_eng_timeout,
.irq_clear = pdc20621_irq_clear,
.irq_on = ata_irq_on,
- .irq_ack = ata_irq_ack,
.port_start = pdc_port_start,
};
ATA_FLAG_NO_ATAPI | ATA_FLAG_PIO_POLLING,
.pio_mask = 0x1f, /* pio0-4 */
.mwdma_mask = 0x07, /* mwdma0-2 */
- .udma_mask = 0x7f, /* udma0-6 ; FIXME */
+ .udma_mask = ATA_UDMA6,
.port_ops = &pdc_20621_ops,
},
!(ap->flags & ATA_FLAG_DISABLED)) {
struct ata_queued_cmd *qc;
- qc = ata_qc_from_tag(ap, ap->active_tag);
+ qc = ata_qc_from_tag(ap, ap->link.active_tag);
if (qc && (!(qc->tf.flags & ATA_TFLAG_POLLING)))
handled += pdc20621_host_intr(ap, qc, (i > 4),
mmio_base);
spin_lock_irqsave(&host->lock, flags);
- qc = ata_qc_from_tag(ap, ap->active_tag);
+ qc = ata_qc_from_tag(ap, ap->link.active_tag);
switch (qc->tf.protocol) {
case ATA_PROT_DMA:
const struct ata_port_info *ppi[] =
{ &pdc_port_info[ent->driver_data], NULL };
struct ata_host *host;
- void __iomem *base;
struct pdc_host_priv *hpriv;
- int rc;
+ int i, rc;
if (!printed_version++)
dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n");
return rc;
host->iomap = pcim_iomap_table(pdev);
- base = host->iomap[PDC_MMIO_BAR] + PDC_CHIP0_OFS;
- pdc_sata_setup_port(&host->ports[0]->ioaddr, base + 0x200);
- pdc_sata_setup_port(&host->ports[1]->ioaddr, base + 0x280);
- pdc_sata_setup_port(&host->ports[2]->ioaddr, base + 0x300);
- pdc_sata_setup_port(&host->ports[3]->ioaddr, base + 0x380);
+ for (i = 0; i < 4; i++) {
+ struct ata_port *ap = host->ports[i];
+ void __iomem *base = host->iomap[PDC_MMIO_BAR] + PDC_CHIP0_OFS;
+ unsigned int offset = 0x200 + i * 0x80;
+
+ pdc_sata_setup_port(&ap->ioaddr, base + offset);
+
+ ata_port_pbar_desc(ap, PDC_MMIO_BAR, -1, "mmio");
+ ata_port_pbar_desc(ap, PDC_DIMM_BAR, -1, "dimm");
+ ata_port_pbar_desc(ap, PDC_MMIO_BAR, offset, "port");
+ }
/* configure and activate */
rc = pci_set_dma_mask(pdev, ATA_DMA_MASK);