--- /dev/null
+/*
+ * Copyright (C) 2002 - 2005 Benjamin Herrenschmidt <benh@kernel.crashing.org>
+ * Copyright (C) 2004 John Steele Scott <toojays@toojays.net>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * TODO: Need a big cleanup here. Basically, we need to have different
+ * cpufreq_driver structures for the different type of HW instead of the
+ * current mess. We also need to better deal with the detection of the
+ * type of machine.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/errno.h>
+#include <linux/kernel.h>
+#include <linux/delay.h>
+#include <linux/sched.h>
+#include <linux/adb.h>
+#include <linux/pmu.h>
+#include <linux/cpufreq.h>
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/hardirq.h>
+#include <asm/prom.h>
+#include <asm/machdep.h>
+#include <asm/irq.h>
+#include <asm/pmac_feature.h>
+#include <asm/mmu_context.h>
+#include <asm/sections.h>
+#include <asm/cputable.h>
+#include <asm/time.h>
+#include <asm/mpic.h>
+#include <asm/keylargo.h>
+#include <asm/switch_to.h>
+
+/* WARNING !!! This will cause calibrate_delay() to be called,
+ * but this is an __init function ! So you MUST go edit
+ * init/main.c to make it non-init before enabling DEBUG_FREQ
+ */
+#undef DEBUG_FREQ
+
+extern void low_choose_7447a_dfs(int dfs);
+extern void low_choose_750fx_pll(int pll);
+extern void low_sleep_handler(void);
+
+/*
+ * Currently, PowerMac cpufreq supports only high & low frequencies
+ * that are set by the firmware
+ */
+static unsigned int low_freq;
+static unsigned int hi_freq;
+static unsigned int cur_freq;
+static unsigned int sleep_freq;
+static unsigned long transition_latency;
+
+/*
+ * Different models uses different mechanisms to switch the frequency
+ */
+static int (*set_speed_proc)(int low_speed);
+static unsigned int (*get_speed_proc)(void);
+
+/*
+ * Some definitions used by the various speedprocs
+ */
+static u32 voltage_gpio;
+static u32 frequency_gpio;
+static u32 slew_done_gpio;
+static int no_schedule;
+static int has_cpu_l2lve;
+static int is_pmu_based;
+
+/* There are only two frequency states for each processor. Values
+ * are in kHz for the time being.
+ */
+#define CPUFREQ_HIGH 0
+#define CPUFREQ_LOW 1
+
+static struct cpufreq_frequency_table pmac_cpu_freqs[] = {
+ {CPUFREQ_HIGH, 0},
+ {CPUFREQ_LOW, 0},
+ {0, CPUFREQ_TABLE_END},
+};
+
+static struct freq_attr* pmac_cpu_freqs_attr[] = {
+ &cpufreq_freq_attr_scaling_available_freqs,
+ NULL,
+};
+
+static inline void local_delay(unsigned long ms)
+{
+ if (no_schedule)
+ mdelay(ms);
+ else
+ msleep(ms);
+}
+
+#ifdef DEBUG_FREQ
+static inline void debug_calc_bogomips(void)
+{
+ /* This will cause a recalc of bogomips and display the
+ * result. We backup/restore the value to avoid affecting the
+ * core cpufreq framework's own calculation.
+ */
+ unsigned long save_lpj = loops_per_jiffy;
+ calibrate_delay();
+ loops_per_jiffy = save_lpj;
+}
+#endif /* DEBUG_FREQ */
+
+/* Switch CPU speed under 750FX CPU control
+ */
+static int cpu_750fx_cpu_speed(int low_speed)
+{
+ u32 hid2;
+
+ if (low_speed == 0) {
+ /* ramping up, set voltage first */
+ pmac_call_feature(PMAC_FTR_WRITE_GPIO, NULL, voltage_gpio, 0x05);
+ /* Make sure we sleep for at least 1ms */
+ local_delay(10);
+
+ /* tweak L2 for high voltage */
+ if (has_cpu_l2lve) {
+ hid2 = mfspr(SPRN_HID2);
+ hid2 &= ~0x2000;
+ mtspr(SPRN_HID2, hid2);
+ }
+ }
+#ifdef CONFIG_6xx
+ low_choose_750fx_pll(low_speed);
+#endif
+ if (low_speed == 1) {
+ /* tweak L2 for low voltage */
+ if (has_cpu_l2lve) {
+ hid2 = mfspr(SPRN_HID2);
+ hid2 |= 0x2000;
+ mtspr(SPRN_HID2, hid2);
+ }
+
+ /* ramping down, set voltage last */
+ pmac_call_feature(PMAC_FTR_WRITE_GPIO, NULL, voltage_gpio, 0x04);
+ local_delay(10);
+ }
+
+ return 0;
+}
+
+static unsigned int cpu_750fx_get_cpu_speed(void)
+{
+ if (mfspr(SPRN_HID1) & HID1_PS)
+ return low_freq;
+ else
+ return hi_freq;
+}
+
+/* Switch CPU speed using DFS */
+static int dfs_set_cpu_speed(int low_speed)
+{
+ if (low_speed == 0) {
+ /* ramping up, set voltage first */
+ pmac_call_feature(PMAC_FTR_WRITE_GPIO, NULL, voltage_gpio, 0x05);
+ /* Make sure we sleep for at least 1ms */
+ local_delay(1);
+ }
+
+ /* set frequency */
+#ifdef CONFIG_6xx
+ low_choose_7447a_dfs(low_speed);
+#endif
+ udelay(100);
+
+ if (low_speed == 1) {
+ /* ramping down, set voltage last */
+ pmac_call_feature(PMAC_FTR_WRITE_GPIO, NULL, voltage_gpio, 0x04);
+ local_delay(1);
+ }
+
+ return 0;
+}
+
+static unsigned int dfs_get_cpu_speed(void)
+{
+ if (mfspr(SPRN_HID1) & HID1_DFS)
+ return low_freq;
+ else
+ return hi_freq;
+}
+
+
+/* Switch CPU speed using slewing GPIOs
+ */
+static int gpios_set_cpu_speed(int low_speed)
+{
+ int gpio, timeout = 0;
+
+ /* If ramping up, set voltage first */
+ if (low_speed == 0) {
+ pmac_call_feature(PMAC_FTR_WRITE_GPIO, NULL, voltage_gpio, 0x05);
+ /* Delay is way too big but it's ok, we schedule */
+ local_delay(10);
+ }
+
+ /* Set frequency */
+ gpio = pmac_call_feature(PMAC_FTR_READ_GPIO, NULL, frequency_gpio, 0);
+ if (low_speed == ((gpio & 0x01) == 0))
+ goto skip;
+
+ pmac_call_feature(PMAC_FTR_WRITE_GPIO, NULL, frequency_gpio,
+ low_speed ? 0x04 : 0x05);
+ udelay(200);
+ do {
+ if (++timeout > 100)
+ break;
+ local_delay(1);
+ gpio = pmac_call_feature(PMAC_FTR_READ_GPIO, NULL, slew_done_gpio, 0);
+ } while((gpio & 0x02) == 0);
+ skip:
+ /* If ramping down, set voltage last */
+ if (low_speed == 1) {
+ pmac_call_feature(PMAC_FTR_WRITE_GPIO, NULL, voltage_gpio, 0x04);
+ /* Delay is way too big but it's ok, we schedule */
+ local_delay(10);
+ }
+
+#ifdef DEBUG_FREQ
+ debug_calc_bogomips();
+#endif
+
+ return 0;
+}
+
+/* Switch CPU speed under PMU control
+ */
+static int pmu_set_cpu_speed(int low_speed)
+{
+ struct adb_request req;
+ unsigned long save_l2cr;
+ unsigned long save_l3cr;
+ unsigned int pic_prio;
+ unsigned long flags;
+
+ preempt_disable();
+
+#ifdef DEBUG_FREQ
+ printk(KERN_DEBUG "HID1, before: %x\n", mfspr(SPRN_HID1));
+#endif
+ pmu_suspend();
+
+ /* Disable all interrupt sources on openpic */
+ pic_prio = mpic_cpu_get_priority();
+ mpic_cpu_set_priority(0xf);
+
+ /* Make sure the decrementer won't interrupt us */
+ asm volatile("mtdec %0" : : "r" (0x7fffffff));
+ /* Make sure any pending DEC interrupt occurring while we did
+ * the above didn't re-enable the DEC */
+ mb();
+ asm volatile("mtdec %0" : : "r" (0x7fffffff));
+
+ /* We can now disable MSR_EE */
+ local_irq_save(flags);
+
+ /* Giveup the FPU & vec */
+ enable_kernel_fp();
+
+#ifdef CONFIG_ALTIVEC
+ if (cpu_has_feature(CPU_FTR_ALTIVEC))
+ enable_kernel_altivec();
+#endif /* CONFIG_ALTIVEC */
+
+ /* Save & disable L2 and L3 caches */
+ save_l3cr = _get_L3CR(); /* (returns -1 if not available) */
+ save_l2cr = _get_L2CR(); /* (returns -1 if not available) */
+
+ /* Send the new speed command. My assumption is that this command
+ * will cause PLL_CFG[0..3] to be changed next time CPU goes to sleep
+ */
+ pmu_request(&req, NULL, 6, PMU_CPU_SPEED, 'W', 'O', 'O', 'F', low_speed);
+ while (!req.complete)
+ pmu_poll();
+
+ /* Prepare the northbridge for the speed transition */
+ pmac_call_feature(PMAC_FTR_SLEEP_STATE,NULL,1,1);
+
+ /* Call low level code to backup CPU state and recover from
+ * hardware reset
+ */
+ low_sleep_handler();
+
+ /* Restore the northbridge */
+ pmac_call_feature(PMAC_FTR_SLEEP_STATE,NULL,1,0);
+
+ /* Restore L2 cache */
+ if (save_l2cr != 0xffffffff && (save_l2cr & L2CR_L2E) != 0)
+ _set_L2CR(save_l2cr);
+ /* Restore L3 cache */
+ if (save_l3cr != 0xffffffff && (save_l3cr & L3CR_L3E) != 0)
+ _set_L3CR(save_l3cr);
+
+ /* Restore userland MMU context */
+ switch_mmu_context(NULL, current->active_mm);
+
+#ifdef DEBUG_FREQ
+ printk(KERN_DEBUG "HID1, after: %x\n", mfspr(SPRN_HID1));
+#endif
+
+ /* Restore low level PMU operations */
+ pmu_unlock();
+
+ /*
+ * Restore decrementer; we'll take a decrementer interrupt
+ * as soon as interrupts are re-enabled and the generic
+ * clockevents code will reprogram it with the right value.
+ */
+ set_dec(1);
+
+ /* Restore interrupts */
+ mpic_cpu_set_priority(pic_prio);
+
+ /* Let interrupts flow again ... */
+ local_irq_restore(flags);
+
+#ifdef DEBUG_FREQ
+ debug_calc_bogomips();
+#endif
+
+ pmu_resume();
+
+ preempt_enable();
+
+ return 0;
+}
+
+static int do_set_cpu_speed(struct cpufreq_policy *policy, int speed_mode,
+ int notify)
+{
+ struct cpufreq_freqs freqs;
+ unsigned long l3cr;
+ static unsigned long prev_l3cr;
+
+ freqs.old = cur_freq;
+ freqs.new = (speed_mode == CPUFREQ_HIGH) ? hi_freq : low_freq;
+
+ if (freqs.old == freqs.new)
+ return 0;
+
+ if (notify)
+ cpufreq_notify_transition(policy, &freqs, CPUFREQ_PRECHANGE);
+ if (speed_mode == CPUFREQ_LOW &&
+ cpu_has_feature(CPU_FTR_L3CR)) {
+ l3cr = _get_L3CR();
+ if (l3cr & L3CR_L3E) {
+ prev_l3cr = l3cr;
+ _set_L3CR(0);
+ }
+ }
+ set_speed_proc(speed_mode == CPUFREQ_LOW);
+ if (speed_mode == CPUFREQ_HIGH &&
+ cpu_has_feature(CPU_FTR_L3CR)) {
+ l3cr = _get_L3CR();
+ if ((prev_l3cr & L3CR_L3E) && l3cr != prev_l3cr)
+ _set_L3CR(prev_l3cr);
+ }
+ if (notify)
+ cpufreq_notify_transition(policy, &freqs, CPUFREQ_POSTCHANGE);
+ cur_freq = (speed_mode == CPUFREQ_HIGH) ? hi_freq : low_freq;
+
+ return 0;
+}
+
+static unsigned int pmac_cpufreq_get_speed(unsigned int cpu)
+{
+ return cur_freq;
+}
+
+static int pmac_cpufreq_verify(struct cpufreq_policy *policy)
+{
+ return cpufreq_frequency_table_verify(policy, pmac_cpu_freqs);
+}
+
+static int pmac_cpufreq_target( struct cpufreq_policy *policy,
+ unsigned int target_freq,
+ unsigned int relation)
+{
+ unsigned int newstate = 0;
+ int rc;
+
+ if (cpufreq_frequency_table_target(policy, pmac_cpu_freqs,
+ target_freq, relation, &newstate))
+ return -EINVAL;
+
+ rc = do_set_cpu_speed(policy, newstate, 1);
+
+ ppc_proc_freq = cur_freq * 1000ul;
+ return rc;
+}
+
+static int pmac_cpufreq_cpu_init(struct cpufreq_policy *policy)
+{
+ if (policy->cpu != 0)
+ return -ENODEV;
+
+ policy->cpuinfo.transition_latency = transition_latency;
+ policy->cur = cur_freq;
+
+ cpufreq_frequency_table_get_attr(pmac_cpu_freqs, policy->cpu);
+ return cpufreq_frequency_table_cpuinfo(policy, pmac_cpu_freqs);
+}
+
+static u32 read_gpio(struct device_node *np)
+{
+ const u32 *reg = of_get_property(np, "reg", NULL);
+ u32 offset;
+
+ if (reg == NULL)
+ return 0;
+ /* That works for all keylargos but shall be fixed properly
+ * some day... The problem is that it seems we can't rely
+ * on the "reg" property of the GPIO nodes, they are either
+ * relative to the base of KeyLargo or to the base of the
+ * GPIO space, and the device-tree doesn't help.
+ */
+ offset = *reg;
+ if (offset < KEYLARGO_GPIO_LEVELS0)
+ offset += KEYLARGO_GPIO_LEVELS0;
+ return offset;
+}
+
+static int pmac_cpufreq_suspend(struct cpufreq_policy *policy)
+{
+ /* Ok, this could be made a bit smarter, but let's be robust for now. We
+ * always force a speed change to high speed before sleep, to make sure
+ * we have appropriate voltage and/or bus speed for the wakeup process,
+ * and to make sure our loops_per_jiffies are "good enough", that is will
+ * not cause too short delays if we sleep in low speed and wake in high
+ * speed..
+ */
+ no_schedule = 1;
+ sleep_freq = cur_freq;
+ if (cur_freq == low_freq && !is_pmu_based)
+ do_set_cpu_speed(policy, CPUFREQ_HIGH, 0);
+ return 0;
+}
+
+static int pmac_cpufreq_resume(struct cpufreq_policy *policy)
+{
+ /* If we resume, first check if we have a get() function */
+ if (get_speed_proc)
+ cur_freq = get_speed_proc();
+ else
+ cur_freq = 0;
+
+ /* We don't, hrm... we don't really know our speed here, best
+ * is that we force a switch to whatever it was, which is
+ * probably high speed due to our suspend() routine
+ */
+ do_set_cpu_speed(policy, sleep_freq == low_freq ?
+ CPUFREQ_LOW : CPUFREQ_HIGH, 0);
+
+ ppc_proc_freq = cur_freq * 1000ul;
+
+ no_schedule = 0;
+ return 0;
+}
+
+static struct cpufreq_driver pmac_cpufreq_driver = {
+ .verify = pmac_cpufreq_verify,
+ .target = pmac_cpufreq_target,
+ .get = pmac_cpufreq_get_speed,
+ .init = pmac_cpufreq_cpu_init,
+ .suspend = pmac_cpufreq_suspend,
+ .resume = pmac_cpufreq_resume,
+ .flags = CPUFREQ_PM_NO_WARN,
+ .attr = pmac_cpu_freqs_attr,
+ .name = "powermac",
+ .owner = THIS_MODULE,
+};
+
+
+static int pmac_cpufreq_init_MacRISC3(struct device_node *cpunode)
+{
+ struct device_node *volt_gpio_np = of_find_node_by_name(NULL,
+ "voltage-gpio");
+ struct device_node *freq_gpio_np = of_find_node_by_name(NULL,
+ "frequency-gpio");
+ struct device_node *slew_done_gpio_np = of_find_node_by_name(NULL,
+ "slewing-done");
+ const u32 *value;
+
+ /*
+ * Check to see if it's GPIO driven or PMU only
+ *
+ * The way we extract the GPIO address is slightly hackish, but it
+ * works well enough for now. We need to abstract the whole GPIO
+ * stuff sooner or later anyway
+ */
+
+ if (volt_gpio_np)
+ voltage_gpio = read_gpio(volt_gpio_np);
+ if (freq_gpio_np)
+ frequency_gpio = read_gpio(freq_gpio_np);
+ if (slew_done_gpio_np)
+ slew_done_gpio = read_gpio(slew_done_gpio_np);
+
+ /* If we use the frequency GPIOs, calculate the min/max speeds based
+ * on the bus frequencies
+ */
+ if (frequency_gpio && slew_done_gpio) {
+ int lenp, rc;
+ const u32 *freqs, *ratio;
+
+ freqs = of_get_property(cpunode, "bus-frequencies", &lenp);
+ lenp /= sizeof(u32);
+ if (freqs == NULL || lenp != 2) {
+ printk(KERN_ERR "cpufreq: bus-frequencies incorrect or missing\n");
+ return 1;
+ }
+ ratio = of_get_property(cpunode, "processor-to-bus-ratio*2",
+ NULL);
+ if (ratio == NULL) {
+ printk(KERN_ERR "cpufreq: processor-to-bus-ratio*2 missing\n");
+ return 1;
+ }
+
+ /* Get the min/max bus frequencies */
+ low_freq = min(freqs[0], freqs[1]);
+ hi_freq = max(freqs[0], freqs[1]);
+
+ /* Grrrr.. It _seems_ that the device-tree is lying on the low bus
+ * frequency, it claims it to be around 84Mhz on some models while
+ * it appears to be approx. 101Mhz on all. Let's hack around here...
+ * fortunately, we don't need to be too precise
+ */
+ if (low_freq < 98000000)
+ low_freq = 101000000;
+
+ /* Convert those to CPU core clocks */
+ low_freq = (low_freq * (*ratio)) / 2000;
+ hi_freq = (hi_freq * (*ratio)) / 2000;
+
+ /* Now we get the frequencies, we read the GPIO to see what is out current
+ * speed
+ */
+ rc = pmac_call_feature(PMAC_FTR_READ_GPIO, NULL, frequency_gpio, 0);
+ cur_freq = (rc & 0x01) ? hi_freq : low_freq;
+
+ set_speed_proc = gpios_set_cpu_speed;
+ return 1;
+ }
+
+ /* If we use the PMU, look for the min & max frequencies in the
+ * device-tree
+ */
+ value = of_get_property(cpunode, "min-clock-frequency", NULL);
+ if (!value)
+ return 1;
+ low_freq = (*value) / 1000;
+ /* The PowerBook G4 12" (PowerBook6,1) has an error in the device-tree
+ * here */
+ if (low_freq < 100000)
+ low_freq *= 10;
+
+ value = of_get_property(cpunode, "max-clock-frequency", NULL);
+ if (!value)
+ return 1;
+ hi_freq = (*value) / 1000;
+ set_speed_proc = pmu_set_cpu_speed;
+ is_pmu_based = 1;
+
+ return 0;
+}
+
+static int pmac_cpufreq_init_7447A(struct device_node *cpunode)
+{
+ struct device_node *volt_gpio_np;
+
+ if (of_get_property(cpunode, "dynamic-power-step", NULL) == NULL)
+ return 1;
+
+ volt_gpio_np = of_find_node_by_name(NULL, "cpu-vcore-select");
+ if (volt_gpio_np)
+ voltage_gpio = read_gpio(volt_gpio_np);
+ if (!voltage_gpio){
+ printk(KERN_ERR "cpufreq: missing cpu-vcore-select gpio\n");
+ return 1;
+ }
+
+ /* OF only reports the high frequency */
+ hi_freq = cur_freq;
+ low_freq = cur_freq/2;
+
+ /* Read actual frequency from CPU */
+ cur_freq = dfs_get_cpu_speed();
+ set_speed_proc = dfs_set_cpu_speed;
+ get_speed_proc = dfs_get_cpu_speed;
+
+ return 0;
+}
+
+static int pmac_cpufreq_init_750FX(struct device_node *cpunode)
+{
+ struct device_node *volt_gpio_np;
+ u32 pvr;
+ const u32 *value;
+
+ if (of_get_property(cpunode, "dynamic-power-step", NULL) == NULL)
+ return 1;
+
+ hi_freq = cur_freq;
+ value = of_get_property(cpunode, "reduced-clock-frequency", NULL);
+ if (!value)
+ return 1;
+ low_freq = (*value) / 1000;
+
+ volt_gpio_np = of_find_node_by_name(NULL, "cpu-vcore-select");
+ if (volt_gpio_np)
+ voltage_gpio = read_gpio(volt_gpio_np);
+
+ pvr = mfspr(SPRN_PVR);
+ has_cpu_l2lve = !((pvr & 0xf00) == 0x100);
+
+ set_speed_proc = cpu_750fx_cpu_speed;
+ get_speed_proc = cpu_750fx_get_cpu_speed;
+ cur_freq = cpu_750fx_get_cpu_speed();
+
+ return 0;
+}
+
+/* Currently, we support the following machines:
+ *
+ * - Titanium PowerBook 1Ghz (PMU based, 667Mhz & 1Ghz)
+ * - Titanium PowerBook 800 (PMU based, 667Mhz & 800Mhz)
+ * - Titanium PowerBook 400 (PMU based, 300Mhz & 400Mhz)
+ * - Titanium PowerBook 500 (PMU based, 300Mhz & 500Mhz)
+ * - iBook2 500/600 (PMU based, 400Mhz & 500/600Mhz)
+ * - iBook2 700 (CPU based, 400Mhz & 700Mhz, support low voltage)
+ * - Recent MacRISC3 laptops
+ * - All new machines with 7447A CPUs
+ */
+static int __init pmac_cpufreq_setup(void)
+{
+ struct device_node *cpunode;
+ const u32 *value;
+
+ if (strstr(cmd_line, "nocpufreq"))
+ return 0;
+
+ /* Assume only one CPU */
+ cpunode = of_find_node_by_type(NULL, "cpu");
+ if (!cpunode)
+ goto out;
+
+ /* Get current cpu clock freq */
+ value = of_get_property(cpunode, "clock-frequency", NULL);
+ if (!value)
+ goto out;
+ cur_freq = (*value) / 1000;
+ transition_latency = CPUFREQ_ETERNAL;
+
+ /* Check for 7447A based MacRISC3 */
+ if (of_machine_is_compatible("MacRISC3") &&
+ of_get_property(cpunode, "dynamic-power-step", NULL) &&
+ PVR_VER(mfspr(SPRN_PVR)) == 0x8003) {
+ pmac_cpufreq_init_7447A(cpunode);
+ transition_latency = 8000000;
+ /* Check for other MacRISC3 machines */
+ } else if (of_machine_is_compatible("PowerBook3,4") ||
+ of_machine_is_compatible("PowerBook3,5") ||
+ of_machine_is_compatible("MacRISC3")) {
+ pmac_cpufreq_init_MacRISC3(cpunode);
+ /* Else check for iBook2 500/600 */
+ } else if (of_machine_is_compatible("PowerBook4,1")) {
+ hi_freq = cur_freq;
+ low_freq = 400000;
+ set_speed_proc = pmu_set_cpu_speed;
+ is_pmu_based = 1;
+ }
+ /* Else check for TiPb 550 */
+ else if (of_machine_is_compatible("PowerBook3,3") && cur_freq == 550000) {
+ hi_freq = cur_freq;
+ low_freq = 500000;
+ set_speed_proc = pmu_set_cpu_speed;
+ is_pmu_based = 1;
+ }
+ /* Else check for TiPb 400 & 500 */
+ else if (of_machine_is_compatible("PowerBook3,2")) {
+ /* We only know about the 400 MHz and the 500Mhz model
+ * they both have 300 MHz as low frequency
+ */
+ if (cur_freq < 350000 || cur_freq > 550000)
+ goto out;
+ hi_freq = cur_freq;
+ low_freq = 300000;
+ set_speed_proc = pmu_set_cpu_speed;
+ is_pmu_based = 1;
+ }
+ /* Else check for 750FX */
+ else if (PVR_VER(mfspr(SPRN_PVR)) == 0x7000)
+ pmac_cpufreq_init_750FX(cpunode);
+out:
+ of_node_put(cpunode);
+ if (set_speed_proc == NULL)
+ return -ENODEV;
+
+ pmac_cpu_freqs[CPUFREQ_LOW].frequency = low_freq;
+ pmac_cpu_freqs[CPUFREQ_HIGH].frequency = hi_freq;
+ ppc_proc_freq = cur_freq * 1000ul;
+
+ printk(KERN_INFO "Registering PowerMac CPU frequency driver\n");
+ printk(KERN_INFO "Low: %d Mhz, High: %d Mhz, Boot: %d Mhz\n",
+ low_freq/1000, hi_freq/1000, cur_freq/1000);
+
+ return cpufreq_register_driver(&pmac_cpufreq_driver);
+}
+
+module_init(pmac_cpufreq_setup);
+
projects / cascardo / linux.git / blobdiff