driver for GPIO functionality on Promontory IOHub
Require ACPI ASL code to enumerate as a platform device.
+config GPIO_ATH79
+ tristate "Atheros AR71XX/AR724X/AR913X GPIO support"
+ default y if ATH79
+ depends on ATH79 || COMPILE_TEST
+ select GPIO_GENERIC
+ select GPIOLIB_IRQCHIP
+ help
+ Select this option to enable GPIO driver for
+ Atheros AR71XX/AR724X/AR913X SoC devices.
+
config GPIO_BCM_KONA
bool "Broadcom Kona GPIO"
depends on OF_GPIO && (ARCH_BCM_MOBILE || COMPILE_TEST)
config GPIO_MB86S7X
bool "GPIO support for Fujitsu MB86S7x Platforms"
- depends on ARCH_MB86S7X
+ depends on ARCH_MB86S7X || COMPILE_TEST
help
Say yes here to support the GPIO controller in Fujitsu MB86S70 SoCs.
+config GPIO_MENZ127
+ tristate "MEN 16Z127 GPIO support"
+ depends on MCB
+ select GPIO_GENERIC
+ help
+ Say yes here to support the MEN 16Z127 GPIO Controller
+
config GPIO_MM_LANTIQ
bool "Lantiq Memory mapped GPIOs"
depends on LANTIQ && SOC_XWAY
config GPIO_MOXART
bool "MOXART GPIO support"
- depends on ARCH_MOXART
+ depends on ARCH_MOXART || COMPILE_TEST
select GPIO_GENERIC
help
Select this option to enable GPIO driver for
depends on PPC_MPC52xx
config GPIO_MPC8XXX
- bool "MPC512x/MPC8xxx GPIO support"
+ bool "MPC512x/MPC8xxx/QorIQ GPIO support"
depends on PPC_MPC512x || PPC_MPC831x || PPC_MPC834x || PPC_MPC837x || \
- FSL_SOC_BOOKE || PPC_86xx
+ FSL_SOC_BOOKE || PPC_86xx || ARCH_LAYERSCAPE || ARM || \
+ COMPILE_TEST
+ select GPIO_GENERIC
help
Say Y here if you're going to use hardware that connects to the
- MPC512x/831x/834x/837x/8572/8610 GPIOs.
+ MPC512x/831x/834x/837x/8572/8610/QorIQ GPIOs.
config GPIO_MVEBU
def_bool y
config GPIO_RCAR
tristate "Renesas R-Car GPIO"
- depends on ARCH_SHMOBILE || COMPILE_TEST
+ depends on ARCH_RENESAS || COMPILE_TEST
select GPIOLIB_IRQCHIP
help
Say yes here to support GPIO on Renesas R-Car SoCs.
select GENERIC_IRQ_CHIP
select OF_GPIO
+config GPIO_TS4800
+ tristate "TS-4800 DIO blocks and compatibles"
+ depends on OF_GPIO
+ depends on SOC_IMX51 || COMPILE_TEST
+ select GPIO_GENERIC
+ help
+ This driver support TS-4800 FPGA GPIO controllers.
+
config GPIO_TZ1090
bool "Toumaz Xenif TZ1090 GPIO support"
depends on SOC_TZ1090
tristate "APM X-Gene GPIO standby controller support"
depends on ARCH_XGENE && OF_GPIO
select GPIO_GENERIC
+ select GPIOLIB_IRQCHIP
help
This driver supports the GPIO block within the APM X-Gene
Standby Domain. Say yes here to enable the GPIO functionality.
menu "Port-mapped I/O GPIO drivers"
depends on X86 # Unconditional I/O space access
+config GPIO_104_DIO_48E
+ tristate "ACCES 104-DIO-48E GPIO support"
+ select GPIOLIB_IRQCHIP
+ help
+ Enables GPIO support for the ACCES 104-DIO-48E family. The base port
+ address for the device may be configured via the dio_48e_base module
+ parameter. The interrupt line number for the device may be configured
+ via the dio_48e_irq module parameter.
+
config GPIO_104_IDIO_16
tristate "ACCES 104-IDIO-16 GPIO support"
select GPIOLIB_IRQCHIP
via the idi_48_irq module parameter.
config GPIO_F7188X
- tristate "F71869, F71869A, F71882FG and F71889F GPIO support"
+ tristate "F71869, F71869A, F71882FG, F71889F and F81866 GPIO support"
help
This option enables support for GPIOs found on Fintek Super-I/O
- chips F71869, F71869A, F71882FG and F71889F.
+ chips F71869, F71869A, F71882FG, F71889F and F81866.
To compile this driver as a module, choose M here: the module will
be called f7188x-gpio.
blocks of the TS-5500: DIO1, DIO2 and the LCD port, and the TS-5600
LCD port.
+config GPIO_WS16C48
+ tristate "WinSystems WS16C48 GPIO support"
+ select GPIOLIB_IRQCHIP
+ help
+ Enables GPIO support for the WinSystems WS16C48. The base port address
+ for the device may be configured via the ws16c48_base module
+ parameter. The interrupt line number for the device may be configured
+ via the ws16c48_irq module parameter.
+
endmenu
menu "I2C GPIO expanders"
8 bits: sx1508q
16 bits: sx1509q
+config GPIO_TPIC2810
+ tristate "TPIC2810 8-Bit I2C GPO expander"
+ help
+ Say yes here to enable the GPO driver for the TI TPIC2810 chip.
+
+ To compile this driver as a module, choose M here: the module will
+ be called gpio-tpic2810.
+
endmenu
menu "MFD GPIO expanders"
---help---
Add support for the GPIO IP in the timberdale FPGA.
+config GPIO_TPS65086
+ tristate "TI TPS65086 GPO"
+ depends on MFD_TPS65086
+ help
+ This driver supports the GPO on TI TPS65086x PMICs.
+
+config GPIO_TPS65218
+ tristate "TPS65218 GPIO"
+ depends on MFD_TPS65218
+ help
+ Select this option to enable GPIO driver for the TPS65218
+ chip family.
+
config GPIO_TPS6586X
bool "TPS6586X GPIO"
depends on MFD_TPS6586X
config GPIO_TPS65912
tristate "TI TPS65912 GPIO"
- depends on (MFD_TPS65912_I2C || MFD_TPS65912_SPI)
+ depends on MFD_TPS65912
help
This driver supports TPS65912 gpio chip
SPI driver for Freescale MC33880 high-side/low-side switch.
This provides GPIO interface supporting inputs and outputs.
+config GPIO_PISOSR
+ tristate "Generic parallel-in/serial-out shift register"
+ help
+ GPIO driver for SPI compatible parallel-in/serial-out shift
+ registers. These are input only devices.
+
endmenu
menu "SPI or I2C GPIO expanders"
projects / cascardo / linux.git / blobdiff