#define GEN6_GRDOM_RENDER (1 << 1)
#define GEN6_GRDOM_MEDIA (1 << 2)
#define GEN6_GRDOM_BLT (1 << 3)
+#define GEN6_GRDOM_VECS (1 << 4)
+#define GEN8_GRDOM_MEDIA2 (1 << 7)
#define RING_PP_DIR_BASE(ring) _MMIO((ring)->mmio_base+0x228)
#define RING_PP_DIR_BASE_READ(ring) _MMIO((ring)->mmio_base+0x518)
#define GEN7_GPGPU_DISPATCHDIMY _MMIO(0x2504)
#define GEN7_GPGPU_DISPATCHDIMZ _MMIO(0x2508)
+/* There are the 16 64-bit CS General Purpose Registers */
+#define HSW_CS_GPR(n) _MMIO(0x2600 + (n) * 8)
+#define HSW_CS_GPR_UDW(n) _MMIO(0x2600 + (n) * 8 + 4)
+
#define OACONTROL _MMIO(0x2360)
#define _GEN7_PIPEA_DE_LOAD_SL 0x70068
#define IOSF_BYTE_ENABLES_SHIFT 4
#define IOSF_BAR_SHIFT 1
#define IOSF_SB_BUSY (1<<0)
-#define IOSF_PORT_BUNIT 0x3
-#define IOSF_PORT_PUNIT 0x4
+#define IOSF_PORT_BUNIT 0x03
+#define IOSF_PORT_PUNIT 0x04
#define IOSF_PORT_NC 0x11
#define IOSF_PORT_DPIO 0x12
-#define IOSF_PORT_DPIO_2 0x1a
#define IOSF_PORT_GPIO_NC 0x13
#define IOSF_PORT_CCK 0x14
-#define IOSF_PORT_CCU 0xA9
-#define IOSF_PORT_GPS_CORE 0x48
-#define IOSF_PORT_FLISDSI 0x1B
+#define IOSF_PORT_DPIO_2 0x1a
+#define IOSF_PORT_FLISDSI 0x1b
+#define IOSF_PORT_GPIO_SC 0x48
+#define IOSF_PORT_GPIO_SUS 0xa8
+#define IOSF_PORT_CCU 0xa9
#define VLV_IOSF_DATA _MMIO(VLV_DISPLAY_BASE + 0x2104)
#define VLV_IOSF_ADDR _MMIO(VLV_DISPLAY_BASE + 0x2108)
#define DSI_PLL_M1_DIV_MASK (0x1ff << 0)
#define CCK_CZ_CLOCK_CONTROL 0x62
#define CCK_DISPLAY_CLOCK_CONTROL 0x6b
+#define CCK_DISPLAY_REF_CLOCK_CONTROL 0x6c
#define CCK_TRUNK_FORCE_ON (1 << 17)
#define CCK_TRUNK_FORCE_OFF (1 << 16)
#define CCK_FREQUENCY_STATUS (0x1f << 8)
#define RING_WAIT (1<<11) /* gen3+, PRBx_CTL */
#define RING_WAIT_SEMAPHORE (1<<10) /* gen6+ */
+#define RING_FORCE_TO_NONPRIV(base, i) _MMIO(((base)+0x4D0) + (i)*4)
+#define RING_MAX_NONPRIV_SLOTS 12
+
#define GEN7_TLB_RD_ADDR _MMIO(0x4700)
#if 0
#define FPGA_DBG _MMIO(0x42300)
#define FPGA_DBG_RM_NOCLAIM (1<<31)
+#define CLAIM_ER _MMIO(VLV_DISPLAY_BASE + 0x2028)
+#define CLAIM_ER_CLR (1 << 31)
+#define CLAIM_ER_OVERFLOW (1 << 16)
+#define CLAIM_ER_CTR_MASK 0xffff
+
#define DERRMR _MMIO(0x44050)
/* Note that HBLANK events are reserved on bdw+ */
#define DERRMR_PIPEA_SCANLINE (1<<0)
#define ILK_INTERNAL_GRAPHICS_DISABLE (1 << 31)
#define ILK_INTERNAL_DISPLAY_DISABLE (1 << 30)
#define ILK_DISPLAY_DEBUG_DISABLE (1 << 29)
+#define IVB_PIPE_C_DISABLE (1 << 28)
#define ILK_HDCP_DISABLE (1 << 25)
#define ILK_eDP_A_DISABLE (1 << 24)
#define HSW_CDCLK_LIMIT (1 << 24)
#define SKL_DFSM_CDCLK_LIMIT_540 (1 << 23)
#define SKL_DFSM_CDCLK_LIMIT_450 (2 << 23)
#define SKL_DFSM_CDCLK_LIMIT_337_5 (3 << 23)
+#define SKL_DFSM_PIPE_A_DISABLE (1 << 30)
+#define SKL_DFSM_PIPE_B_DISABLE (1 << 21)
+#define SKL_DFSM_PIPE_C_DISABLE (1 << 28)
+
+#define GEN7_FF_SLICE_CS_CHICKEN1 _MMIO(0x20e0)
+#define GEN9_FFSC_PERCTX_PREEMPT_CTRL (1<<14)
#define FF_SLICE_CS_CHICKEN2 _MMIO(0x20e4)
#define GEN9_TSG_BARRIER_ACK_DISABLE (1<<8)
+#define GEN9_CS_DEBUG_MODE1 _MMIO(0x20ec)
+#define GEN8_CS_CHICKEN1 _MMIO(0x2580)
+
/* GEN7 chicken */
#define GEN7_COMMON_SLICE_CHICKEN1 _MMIO(0x7010)
# define GEN7_CSC1_RHWO_OPT_DISABLE_IN_RCC ((1<<10) | (1<<26))
#define HDC_FORCE_NON_COHERENT (1<<4)
#define HDC_BARRIER_PERFORMANCE_DISABLE (1<<10)
+#define GEN8_HDC_CHICKEN1 _MMIO(0x7304)
+
/* GEN9 chicken */
#define SLICE_ECO_CHICKEN0 _MMIO(0x7308)
#define PIXEL_MASK_CAMMING_DISABLE (1 << 14)
#define VLV_PMWGICZ _MMIO(0x1300a4)
+#define RC6_LOCATION _MMIO(0xD40)
+#define RC6_CTX_IN_DRAM (1 << 0)
+#define RC6_CTX_BASE _MMIO(0xD48)
+#define RC6_CTX_BASE_MASK 0xFFFFFFF0
+#define PWRCTX_MAXCNT_RCSUNIT _MMIO(0x2054)
+#define PWRCTX_MAXCNT_VCSUNIT0 _MMIO(0x12054)
+#define PWRCTX_MAXCNT_BCSUNIT _MMIO(0x22054)
+#define PWRCTX_MAXCNT_VECSUNIT _MMIO(0x1A054)
+#define PWRCTX_MAXCNT_VCSUNIT1 _MMIO(0x1C054)
+#define IDLE_TIME_MASK 0xFFFFF
#define FORCEWAKE _MMIO(0xA18C)
#define FORCEWAKE_VLV _MMIO(0x1300b0)
#define FORCEWAKE_ACK_VLV _MMIO(0x1300b4)
#define GEN6_RPDEUC _MMIO(0xA084)
#define GEN6_RPDEUCSW _MMIO(0xA088)
#define GEN6_RC_STATE _MMIO(0xA094)
+#define RC6_STATE (1 << 18)
#define GEN6_RC1_WAKE_RATE_LIMIT _MMIO(0xA098)
#define GEN6_RC6_WAKE_RATE_LIMIT _MMIO(0xA09C)
#define GEN6_RC6pp_WAKE_RATE_LIMIT _MMIO(0xA0A0)
#define GEN9_CCS_TLB_PREFETCH_ENABLE (1<<3)
#define GEN8_ROW_CHICKEN _MMIO(0xe4f0)
+#define FLOW_CONTROL_ENABLE (1<<15)
#define PARTIAL_INSTRUCTION_SHOOTDOWN_DISABLE (1<<8)
#define STALL_DOP_GATING_DISABLE (1<<5)
/* SBI offsets */
#define SBI_SSCDIVINTPHASE 0x0200
#define SBI_SSCDIVINTPHASE6 0x0600
-#define SBI_SSCDIVINTPHASE_DIVSEL_MASK ((0x7f)<<1)
+#define SBI_SSCDIVINTPHASE_DIVSEL_SHIFT 1
+#define SBI_SSCDIVINTPHASE_DIVSEL_MASK (0x7f<<1)
#define SBI_SSCDIVINTPHASE_DIVSEL(x) ((x)<<1)
-#define SBI_SSCDIVINTPHASE_INCVAL_MASK ((0x7f)<<8)
+#define SBI_SSCDIVINTPHASE_INCVAL_SHIFT 8
+#define SBI_SSCDIVINTPHASE_INCVAL_MASK (0x7f<<8)
#define SBI_SSCDIVINTPHASE_INCVAL(x) ((x)<<8)
#define SBI_SSCDIVINTPHASE_DIR(x) ((x)<<15)
#define SBI_SSCDIVINTPHASE_PROPAGATE (1<<0)
#define SBI_SSCCTL_PATHALT (1<<3)
#define SBI_SSCCTL_DISABLE (1<<0)
#define SBI_SSCAUXDIV6 0x0610
+#define SBI_SSCAUXDIV_FINALDIV2SEL_SHIFT 4
+#define SBI_SSCAUXDIV_FINALDIV2SEL_MASK (1<<4)
#define SBI_SSCAUXDIV_FINALDIV2SEL(x) ((x)<<4)
#define SBI_DBUFF0 0x2a00
#define SBI_GEN0 0x1f00
#define DC_STATE_EN_UPTO_DC5_DC6_MASK 0x3
#define DC_STATE_DEBUG _MMIO(0x45520)
+#define DC_STATE_DEBUG_MASK_CORES (1<<0)
#define DC_STATE_DEBUG_MASK_MEMORY_UP (1<<1)
/* Please see hsw_read_dcomp() and hsw_write_dcomp() before using this register,
#define BXT_MIPI_DIV_SHIFT(port) \
_MIPI_PORT(port, BXT_MIPI1_DIV_SHIFT, \
BXT_MIPI2_DIV_SHIFT)
-/* Var clock divider to generate TX source. Result must be < 39.5 M */
-#define BXT_MIPI1_ESCLK_VAR_DIV_MASK (0x3F << 26)
-#define BXT_MIPI2_ESCLK_VAR_DIV_MASK (0x3F << 10)
-#define BXT_MIPI_ESCLK_VAR_DIV_MASK(port) \
- _MIPI_PORT(port, BXT_MIPI1_ESCLK_VAR_DIV_MASK, \
- BXT_MIPI2_ESCLK_VAR_DIV_MASK)
-
-#define BXT_MIPI_ESCLK_VAR_DIV(port, val) \
- (val << BXT_MIPI_DIV_SHIFT(port))
+
/* TX control divider to select actual TX clock output from (8x/var) */
-#define BXT_MIPI1_TX_ESCLK_SHIFT 21
-#define BXT_MIPI2_TX_ESCLK_SHIFT 5
+#define BXT_MIPI1_TX_ESCLK_SHIFT 26
+#define BXT_MIPI2_TX_ESCLK_SHIFT 10
#define BXT_MIPI_TX_ESCLK_SHIFT(port) \
_MIPI_PORT(port, BXT_MIPI1_TX_ESCLK_SHIFT, \
BXT_MIPI2_TX_ESCLK_SHIFT)
-#define BXT_MIPI1_TX_ESCLK_FIXDIV_MASK (3 << 21)
-#define BXT_MIPI2_TX_ESCLK_FIXDIV_MASK (3 << 5)
+#define BXT_MIPI1_TX_ESCLK_FIXDIV_MASK (0x3F << 26)
+#define BXT_MIPI2_TX_ESCLK_FIXDIV_MASK (0x3F << 10)
#define BXT_MIPI_TX_ESCLK_FIXDIV_MASK(port) \
_MIPI_PORT(port, BXT_MIPI1_TX_ESCLK_FIXDIV_MASK, \
- BXT_MIPI2_TX_ESCLK_FIXDIV_MASK)
-#define BXT_MIPI_TX_ESCLK_8XDIV_BY2(port) \
- (0x0 << BXT_MIPI_TX_ESCLK_SHIFT(port))
-#define BXT_MIPI_TX_ESCLK_8XDIV_BY4(port) \
- (0x1 << BXT_MIPI_TX_ESCLK_SHIFT(port))
-#define BXT_MIPI_TX_ESCLK_8XDIV_BY8(port) \
- (0x2 << BXT_MIPI_TX_ESCLK_SHIFT(port))
-/* RX control divider to select actual RX clock output from 8x*/
-#define BXT_MIPI1_RX_ESCLK_SHIFT 19
-#define BXT_MIPI2_RX_ESCLK_SHIFT 3
-#define BXT_MIPI_RX_ESCLK_SHIFT(port) \
- _MIPI_PORT(port, BXT_MIPI1_RX_ESCLK_SHIFT, \
- BXT_MIPI2_RX_ESCLK_SHIFT)
-#define BXT_MIPI1_RX_ESCLK_FIXDIV_MASK (3 << 19)
-#define BXT_MIPI2_RX_ESCLK_FIXDIV_MASK (3 << 3)
-#define BXT_MIPI_RX_ESCLK_FIXDIV_MASK(port) \
- (3 << BXT_MIPI_RX_ESCLK_SHIFT(port))
-#define BXT_MIPI_RX_ESCLK_8X_BY2(port) \
- (1 << BXT_MIPI_RX_ESCLK_SHIFT(port))
-#define BXT_MIPI_RX_ESCLK_8X_BY3(port) \
- (2 << BXT_MIPI_RX_ESCLK_SHIFT(port))
-#define BXT_MIPI_RX_ESCLK_8X_BY4(port) \
- (3 << BXT_MIPI_RX_ESCLK_SHIFT(port))
-/* BXT-A WA: Always prog DPHY dividers to 00 */
-#define BXT_MIPI1_DPHY_DIV_SHIFT 16
-#define BXT_MIPI2_DPHY_DIV_SHIFT 0
-#define BXT_MIPI_DPHY_DIV_SHIFT(port) \
- _MIPI_PORT(port, BXT_MIPI1_DPHY_DIV_SHIFT, \
- BXT_MIPI2_DPHY_DIV_SHIFT)
-#define BXT_MIPI_1_DPHY_DIVIDER_MASK (3 << 16)
-#define BXT_MIPI_2_DPHY_DIVIDER_MASK (3 << 0)
-#define BXT_MIPI_DPHY_DIVIDER_MASK(port) \
- (3 << BXT_MIPI_DPHY_DIV_SHIFT(port))
+ BXT_MIPI2_TX_ESCLK_FIXDIV_MASK)
+#define BXT_MIPI_TX_ESCLK_DIVIDER(port, val) \
+ ((val & 0x3F) << BXT_MIPI_TX_ESCLK_SHIFT(port))
+/* RX upper control divider to select actual RX clock output from 8x */
+#define BXT_MIPI1_RX_ESCLK_UPPER_SHIFT 21
+#define BXT_MIPI2_RX_ESCLK_UPPER_SHIFT 5
+#define BXT_MIPI_RX_ESCLK_UPPER_SHIFT(port) \
+ _MIPI_PORT(port, BXT_MIPI1_RX_ESCLK_UPPER_SHIFT, \
+ BXT_MIPI2_RX_ESCLK_UPPER_SHIFT)
+#define BXT_MIPI1_RX_ESCLK_UPPER_FIXDIV_MASK (3 << 21)
+#define BXT_MIPI2_RX_ESCLK_UPPER_FIXDIV_MASK (3 << 5)
+#define BXT_MIPI_RX_ESCLK_UPPER_FIXDIV_MASK(port) \
+ _MIPI_PORT(port, BXT_MIPI1_RX_ESCLK_UPPER_FIXDIV_MASK, \
+ BXT_MIPI2_RX_ESCLK_UPPER_FIXDIV_MASK)
+#define BXT_MIPI_RX_ESCLK_UPPER_DIVIDER(port, val) \
+ ((val & 3) << BXT_MIPI_RX_ESCLK_UPPER_SHIFT(port))
+/* 8/3X divider to select the actual 8/3X clock output from 8x */
+#define BXT_MIPI1_8X_BY3_SHIFT 19
+#define BXT_MIPI2_8X_BY3_SHIFT 3
+#define BXT_MIPI_8X_BY3_SHIFT(port) \
+ _MIPI_PORT(port, BXT_MIPI1_8X_BY3_SHIFT, \
+ BXT_MIPI2_8X_BY3_SHIFT)
+#define BXT_MIPI1_8X_BY3_DIVIDER_MASK (3 << 19)
+#define BXT_MIPI2_8X_BY3_DIVIDER_MASK (3 << 3)
+#define BXT_MIPI_8X_BY3_DIVIDER_MASK(port) \
+ _MIPI_PORT(port, BXT_MIPI1_8X_BY3_DIVIDER_MASK, \
+ BXT_MIPI2_8X_BY3_DIVIDER_MASK)
+#define BXT_MIPI_8X_BY3_DIVIDER(port, val) \
+ ((val & 3) << BXT_MIPI_8X_BY3_SHIFT(port))
+/* RX lower control divider to select actual RX clock output from 8x */
+#define BXT_MIPI1_RX_ESCLK_LOWER_SHIFT 16
+#define BXT_MIPI2_RX_ESCLK_LOWER_SHIFT 0
+#define BXT_MIPI_RX_ESCLK_LOWER_SHIFT(port) \
+ _MIPI_PORT(port, BXT_MIPI1_RX_ESCLK_LOWER_SHIFT, \
+ BXT_MIPI2_RX_ESCLK_LOWER_SHIFT)
+#define BXT_MIPI1_RX_ESCLK_LOWER_FIXDIV_MASK (3 << 16)
+#define BXT_MIPI2_RX_ESCLK_LOWER_FIXDIV_MASK (3 << 0)
+#define BXT_MIPI_RX_ESCLK_LOWER_FIXDIV_MASK(port) \
+ _MIPI_PORT(port, BXT_MIPI1_RX_ESCLK_LOWER_FIXDIV_MASK, \
+ BXT_MIPI2_RX_ESCLK_LOWER_FIXDIV_MASK)
+#define BXT_MIPI_RX_ESCLK_LOWER_DIVIDER(port, val) \
+ ((val & 3) << BXT_MIPI_RX_ESCLK_LOWER_SHIFT(port))
+
+#define RX_DIVIDER_BIT_1_2 0x3
+#define RX_DIVIDER_BIT_3_4 0xC
/* BXT MIPI mode configure */
#define _BXT_MIPIA_TRANS_HACTIVE 0x6B0F8
#define VID_MODE_FORMAT_MASK (0xf << 7)
#define VID_MODE_NOT_SUPPORTED (0 << 7)
#define VID_MODE_FORMAT_RGB565 (1 << 7)
-#define VID_MODE_FORMAT_RGB666 (2 << 7)
-#define VID_MODE_FORMAT_RGB666_LOOSE (3 << 7)
+#define VID_MODE_FORMAT_RGB666_PACKED (2 << 7)
+#define VID_MODE_FORMAT_RGB666 (3 << 7)
#define VID_MODE_FORMAT_RGB888 (4 << 7)
#define CMD_MODE_CHANNEL_NUMBER_SHIFT 5
#define CMD_MODE_CHANNEL_NUMBER_MASK (3 << 5)
#define READ_REQUEST_PRIORITY_HIGH (3 << 3)
#define RGB_FLIP_TO_BGR (1 << 2)
+#define BXT_PIPE_SELECT_SHIFT 7
#define BXT_PIPE_SELECT_MASK (7 << 7)
#define BXT_PIPE_SELECT(pipe) ((pipe) << 7)
#define GEN9_VEBOX_MOCS(i) _MMIO(0xcb00 + (i) * 4) /* Video MOCS registers */
#define GEN9_BLT_MOCS(i) _MMIO(0xcc00 + (i) * 4) /* Blitter MOCS registers */
+/* gamt regs */
+#define GEN8_L3_LRA_1_GPGPU _MMIO(0x4dd4)
+#define GEN8_L3_LRA_1_GPGPU_DEFAULT_VALUE_BDW 0x67F1427F /* max/min for LRA1/2 */
+#define GEN8_L3_LRA_1_GPGPU_DEFAULT_VALUE_CHV 0x5FF101FF /* max/min for LRA1/2 */
+#define GEN9_L3_LRA_1_GPGPU_DEFAULT_VALUE_SKL 0x67F1427F /* " " */
+#define GEN9_L3_LRA_1_GPGPU_DEFAULT_VALUE_BXT 0x5FF101FF /* " " */
+
#endif /* _I915_REG_H_ */
projects / cascardo / linux.git / blobdiff