#define MI_SEMAPHORE_UPDATE (1<<21)
#define MI_SEMAPHORE_COMPARE (1<<20)
#define MI_SEMAPHORE_REGISTER (1<<18)
-#define MI_SEMAPHORE_SYNC_RV (2<<16)
-#define MI_SEMAPHORE_SYNC_RB (0<<16)
-#define MI_SEMAPHORE_SYNC_VR (0<<16)
-#define MI_SEMAPHORE_SYNC_VB (2<<16)
-#define MI_SEMAPHORE_SYNC_BR (2<<16)
-#define MI_SEMAPHORE_SYNC_BV (0<<16)
-#define MI_SEMAPHORE_SYNC_INVALID (1<<0)
+#define MI_SEMAPHORE_SYNC_VR (0<<16) /* RCS wait for VCS (RVSYNC) */
+#define MI_SEMAPHORE_SYNC_VER (1<<16) /* RCS wait for VECS (RVESYNC) */
+#define MI_SEMAPHORE_SYNC_BR (2<<16) /* RCS wait for BCS (RBSYNC) */
+#define MI_SEMAPHORE_SYNC_BV (0<<16) /* VCS wait for BCS (VBSYNC) */
+#define MI_SEMAPHORE_SYNC_VEV (1<<16) /* VCS wait for VECS (VVESYNC) */
+#define MI_SEMAPHORE_SYNC_RV (2<<16) /* VCS wait for RCS (VRSYNC) */
+#define MI_SEMAPHORE_SYNC_RB (0<<16) /* BCS wait for RCS (BRSYNC) */
+#define MI_SEMAPHORE_SYNC_VEB (1<<16) /* BCS wait for VECS (BVESYNC) */
+#define MI_SEMAPHORE_SYNC_VB (2<<16) /* BCS wait for VCS (BVSYNC) */
+#define MI_SEMAPHORE_SYNC_BVE (0<<16) /* VECS wait for BCS (VEBSYNC) */
+#define MI_SEMAPHORE_SYNC_VVE (1<<16) /* VECS wait for VCS (VEVSYNC) */
+#define MI_SEMAPHORE_SYNC_RVE (2<<16) /* VECS wait for RCS (VERSYNC) */
+#define MI_SEMAPHORE_SYNC_INVALID (3<<16)
/*
* 3D instructions used by the kernel
*/
#define DEBUG_RESET_DISPLAY (1<<9)
/*
- * DPIO - a special bus for various display related registers to hide behind:
- * 0x800c: m1, m2, n, p1, p2, k dividers
- * 0x8014: REF and SFR select
- * 0x8014: N divider, VCO select
- * 0x801c/3c: core clock bits
- * 0x8048/68: low pass filter coefficients
- * 0x8100: fast clock controls
+ * IOSF sideband
+ */
+#define VLV_IOSF_DOORBELL_REQ (VLV_DISPLAY_BASE + 0x2100)
+#define IOSF_DEVFN_SHIFT 24
+#define IOSF_OPCODE_SHIFT 16
+#define IOSF_PORT_SHIFT 8
+#define IOSF_BYTE_ENABLES_SHIFT 4
+#define IOSF_BAR_SHIFT 1
+#define IOSF_SB_BUSY (1<<0)
+#define IOSF_PORT_PUNIT 0x4
+#define IOSF_PORT_NC 0x11
+#define IOSF_PORT_DPIO 0x12
+#define VLV_IOSF_DATA (VLV_DISPLAY_BASE + 0x2104)
+#define VLV_IOSF_ADDR (VLV_DISPLAY_BASE + 0x2108)
+
+#define PUNIT_OPCODE_REG_READ 6
+#define PUNIT_OPCODE_REG_WRITE 7
+
+#define PUNIT_REG_GPU_LFM 0xd3
+#define PUNIT_REG_GPU_FREQ_REQ 0xd4
+#define PUNIT_REG_GPU_FREQ_STS 0xd8
+#define PUNIT_REG_MEDIA_TURBO_FREQ_REQ 0xdc
+
+#define PUNIT_FUSE_BUS2 0xf6 /* bits 47:40 */
+#define PUNIT_FUSE_BUS1 0xf5 /* bits 55:48 */
+
+#define IOSF_NC_FB_GFX_FREQ_FUSE 0x1c
+#define FB_GFX_MAX_FREQ_FUSE_SHIFT 3
+#define FB_GFX_MAX_FREQ_FUSE_MASK 0x000007f8
+#define FB_GFX_FGUARANTEED_FREQ_FUSE_SHIFT 11
+#define FB_GFX_FGUARANTEED_FREQ_FUSE_MASK 0x0007f800
+#define IOSF_NC_FB_GFX_FMAX_FUSE_HI 0x34
+#define FB_FMAX_VMIN_FREQ_HI_MASK 0x00000007
+#define IOSF_NC_FB_GFX_FMAX_FUSE_LO 0x30
+#define FB_FMAX_VMIN_FREQ_LO_SHIFT 27
+#define FB_FMAX_VMIN_FREQ_LO_MASK 0xf8000000
+
+/*
+ * DPIO - a special bus for various display related registers to hide behind
*
* DPIO is VLV only.
*
* Note: digital port B is DDI0, digital pot C is DDI1
*/
-#define DPIO_PKT (VLV_DISPLAY_BASE + 0x2100)
-#define DPIO_RID (0<<24)
-#define DPIO_OP_WRITE (1<<16)
-#define DPIO_OP_READ (0<<16)
-#define DPIO_PORTID (0x12<<8)
-#define DPIO_BYTE (0xf<<4)
-#define DPIO_BUSY (1<<0) /* status only */
-#define DPIO_DATA (VLV_DISPLAY_BASE + 0x2104)
-#define DPIO_REG (VLV_DISPLAY_BASE + 0x2108)
+#define DPIO_DEVFN 0
+#define DPIO_OPCODE_REG_WRITE 1
+#define DPIO_OPCODE_REG_READ 0
+
#define DPIO_CTL (VLV_DISPLAY_BASE + 0x2110)
#define DPIO_MODSEL1 (1<<3) /* if ref clk b == 27 */
#define DPIO_MODSEL0 (1<<2) /* if ref clk a == 27 */
#define RENDER_RING_BASE 0x02000
#define BSD_RING_BASE 0x04000
#define GEN6_BSD_RING_BASE 0x12000
+#define VEBOX_RING_BASE 0x1a000
#define BLT_RING_BASE 0x22000
#define RING_TAIL(base) ((base)+0x30)
#define RING_HEAD(base) ((base)+0x34)
#define RING_CTL(base) ((base)+0x3c)
#define RING_SYNC_0(base) ((base)+0x40)
#define RING_SYNC_1(base) ((base)+0x44)
-#define GEN6_RVSYNC (RING_SYNC_0(RENDER_RING_BASE))
-#define GEN6_RBSYNC (RING_SYNC_1(RENDER_RING_BASE))
-#define GEN6_VRSYNC (RING_SYNC_1(GEN6_BSD_RING_BASE))
-#define GEN6_VBSYNC (RING_SYNC_0(GEN6_BSD_RING_BASE))
-#define GEN6_BRSYNC (RING_SYNC_0(BLT_RING_BASE))
-#define GEN6_BVSYNC (RING_SYNC_1(BLT_RING_BASE))
+#define RING_SYNC_2(base) ((base)+0x48)
+#define GEN6_RVSYNC (RING_SYNC_0(RENDER_RING_BASE))
+#define GEN6_RBSYNC (RING_SYNC_1(RENDER_RING_BASE))
+#define GEN6_RVESYNC (RING_SYNC_2(RENDER_RING_BASE))
+#define GEN6_VBSYNC (RING_SYNC_0(GEN6_BSD_RING_BASE))
+#define GEN6_VRSYNC (RING_SYNC_1(GEN6_BSD_RING_BASE))
+#define GEN6_VVESYNC (RING_SYNC_2(GEN6_BSD_RING_BASE))
+#define GEN6_BRSYNC (RING_SYNC_0(BLT_RING_BASE))
+#define GEN6_BVSYNC (RING_SYNC_1(BLT_RING_BASE))
+#define GEN6_BVESYNC (RING_SYNC_2(BLT_RING_BASE))
+#define GEN6_VEBSYNC (RING_SYNC_0(VEBOX_RING_BASE))
+#define GEN6_VERSYNC (RING_SYNC_1(VEBOX_RING_BASE))
+#define GEN6_VEVSYNC (RING_SYNC_2(VEBOX_RING_BASE))
+#define GEN6_NOSYNC 0
#define RING_MAX_IDLE(base) ((base)+0x54)
#define RING_HWS_PGA(base) ((base)+0x80)
#define RING_HWS_PGA_GEN6(base) ((base)+0x2080)
#define DONE_REG 0x40b0
#define BSD_HWS_PGA_GEN7 (0x04180)
#define BLT_HWS_PGA_GEN7 (0x04280)
+#define VEBOX_HWS_PGA_GEN7 (0x04380)
#define RING_ACTHD(base) ((base)+0x74)
#define RING_NOPID(base) ((base)+0x94)
#define RING_IMR(base) ((base)+0xa8)
#define VLV_IMR (VLV_DISPLAY_BASE + 0x20a8)
#define VLV_ISR (VLV_DISPLAY_BASE + 0x20ac)
#define VLV_PCBR (VLV_DISPLAY_BASE + 0x2120)
-#define I915_PIPE_CONTROL_NOTIFY_INTERRUPT (1<<18)
-#define I915_DISPLAY_PORT_INTERRUPT (1<<17)
-#define I915_RENDER_COMMAND_PARSER_ERROR_INTERRUPT (1<<15)
-#define I915_GMCH_THERMAL_SENSOR_EVENT_INTERRUPT (1<<14) /* p-state */
-#define I915_HWB_OOM_INTERRUPT (1<<13)
-#define I915_SYNC_STATUS_INTERRUPT (1<<12)
-#define I915_DISPLAY_PLANE_A_FLIP_PENDING_INTERRUPT (1<<11)
-#define I915_DISPLAY_PLANE_B_FLIP_PENDING_INTERRUPT (1<<10)
-#define I915_OVERLAY_PLANE_FLIP_PENDING_INTERRUPT (1<<9)
-#define I915_DISPLAY_PLANE_C_FLIP_PENDING_INTERRUPT (1<<8)
-#define I915_DISPLAY_PIPE_A_VBLANK_INTERRUPT (1<<7)
-#define I915_DISPLAY_PIPE_A_EVENT_INTERRUPT (1<<6)
-#define I915_DISPLAY_PIPE_B_VBLANK_INTERRUPT (1<<5)
-#define I915_DISPLAY_PIPE_B_EVENT_INTERRUPT (1<<4)
-#define I915_DEBUG_INTERRUPT (1<<2)
-#define I915_USER_INTERRUPT (1<<1)
-#define I915_ASLE_INTERRUPT (1<<0)
-#define I915_BSD_USER_INTERRUPT (1<<25)
#define DISPLAY_PLANE_FLIP_PENDING(plane) (1<<(11-(plane))) /* A and B only */
#define EIR 0x020b0
#define EMR 0x020b4
#define CACHE_MODE_1 0x7004 /* IVB+ */
#define PIXEL_SUBSPAN_COLLECT_OPT_DISABLE (1<<6)
-/* GEN6 interrupt control
- * Note that the per-ring interrupt bits do alias with the global interrupt bits
- * in GTIMR. */
-#define GEN6_RENDER_HWSTAM 0x2098
-#define GEN6_RENDER_IMR 0x20a8
-#define GEN6_RENDER_CONTEXT_SWITCH_INTERRUPT (1 << 8)
-#define GEN6_RENDER_PPGTT_PAGE_FAULT (1 << 7)
-#define GEN6_RENDER_TIMEOUT_COUNTER_EXPIRED (1 << 6)
-#define GEN6_RENDER_L3_PARITY_ERROR (1 << 5)
-#define GEN6_RENDER_PIPE_CONTROL_NOTIFY_INTERRUPT (1 << 4)
-#define GEN6_RENDER_COMMAND_PARSER_MASTER_ERROR (1 << 3)
-#define GEN6_RENDER_SYNC_STATUS (1 << 2)
-#define GEN6_RENDER_DEBUG_INTERRUPT (1 << 1)
-#define GEN6_RENDER_USER_INTERRUPT (1 << 0)
-
-#define GEN6_BLITTER_HWSTAM 0x22098
-#define GEN6_BLITTER_IMR 0x220a8
-#define GEN6_BLITTER_MI_FLUSH_DW_NOTIFY_INTERRUPT (1 << 26)
-#define GEN6_BLITTER_COMMAND_PARSER_MASTER_ERROR (1 << 25)
-#define GEN6_BLITTER_SYNC_STATUS (1 << 24)
-#define GEN6_BLITTER_USER_INTERRUPT (1 << 22)
-
#define GEN6_BLITTER_ECOSKPD 0x221d0
#define GEN6_BLITTER_LOCK_SHIFT 16
#define GEN6_BLITTER_FBC_NOTIFY (1<<3)
#define GEN6_BSD_SLEEP_INDICATOR (1 << 3)
#define GEN6_BSD_GO_INDICATOR (1 << 4)
-#define GEN6_BSD_HWSTAM 0x12098
-#define GEN6_BSD_IMR 0x120a8
-#define GEN6_BSD_USER_INTERRUPT (1 << 12)
+/* On modern GEN architectures interrupt control consists of two sets
+ * of registers. The first set pertains to the ring generating the
+ * interrupt. The second control is for the functional block generating the
+ * interrupt. These are PM, GT, DE, etc.
+ *
+ * Luckily *knocks on wood* all the ring interrupt bits match up with the
+ * GT interrupt bits, so we don't need to duplicate the defines.
+ *
+ * These defines should cover us well from SNB->HSW with minor exceptions
+ * it can also work on ILK.
+ */
+#define GT_BLT_FLUSHDW_NOTIFY_INTERRUPT (1 << 26)
+#define GT_BLT_CS_ERROR_INTERRUPT (1 << 25)
+#define GT_BLT_USER_INTERRUPT (1 << 22)
+#define GT_BSD_CS_ERROR_INTERRUPT (1 << 15)
+#define GT_BSD_USER_INTERRUPT (1 << 12)
+#define GT_RENDER_L3_PARITY_ERROR_INTERRUPT (1 << 5) /* !snb */
+#define GT_RENDER_PIPECTL_NOTIFY_INTERRUPT (1 << 4)
+#define GT_RENDER_CS_MASTER_ERROR_INTERRUPT (1 << 3)
+#define GT_RENDER_SYNC_STATUS_INTERRUPT (1 << 2)
+#define GT_RENDER_DEBUG_INTERRUPT (1 << 1)
+#define GT_RENDER_USER_INTERRUPT (1 << 0)
+
+#define PM_VEBOX_CS_ERROR_INTERRUPT (1 << 12) /* hsw+ */
+#define PM_VEBOX_USER_INTERRUPT (1 << 10) /* hsw+ */
+
+/* These are all the "old" interrupts */
+#define ILK_BSD_USER_INTERRUPT (1<<5)
+#define I915_PIPE_CONTROL_NOTIFY_INTERRUPT (1<<18)
+#define I915_DISPLAY_PORT_INTERRUPT (1<<17)
+#define I915_RENDER_COMMAND_PARSER_ERROR_INTERRUPT (1<<15)
+#define I915_GMCH_THERMAL_SENSOR_EVENT_INTERRUPT (1<<14) /* p-state */
+#define I915_HWB_OOM_INTERRUPT (1<<13)
+#define I915_SYNC_STATUS_INTERRUPT (1<<12)
+#define I915_DISPLAY_PLANE_A_FLIP_PENDING_INTERRUPT (1<<11)
+#define I915_DISPLAY_PLANE_B_FLIP_PENDING_INTERRUPT (1<<10)
+#define I915_OVERLAY_PLANE_FLIP_PENDING_INTERRUPT (1<<9)
+#define I915_DISPLAY_PLANE_C_FLIP_PENDING_INTERRUPT (1<<8)
+#define I915_DISPLAY_PIPE_A_VBLANK_INTERRUPT (1<<7)
+#define I915_DISPLAY_PIPE_A_EVENT_INTERRUPT (1<<6)
+#define I915_DISPLAY_PIPE_B_VBLANK_INTERRUPT (1<<5)
+#define I915_DISPLAY_PIPE_B_EVENT_INTERRUPT (1<<4)
+#define I915_DEBUG_INTERRUPT (1<<2)
+#define I915_USER_INTERRUPT (1<<1)
+#define I915_ASLE_INTERRUPT (1<<0)
+#define I915_BSD_USER_INTERRUPT (1 << 25)
#define GEN6_BSD_RNCID 0x12198
#define WM3S_LP_IVB 0x45128
#define WM1S_LP_EN (1<<31)
+#define HSW_WM_LP_VAL(lat, fbc, pri, cur) \
+ (WM3_LP_EN | ((lat) << WM1_LP_LATENCY_SHIFT) | \
+ ((fbc) << WM1_LP_FBC_SHIFT) | ((pri) << WM1_LP_SR_SHIFT) | (cur))
+
/* Memory latency timer register */
#define MLTR_ILK 0x11222
#define MLTR_WM1_SHIFT 0
#define DEIIR 0x44008
#define DEIER 0x4400c
-/* GT interrupt.
- * Note that for gen6+ the ring-specific interrupt bits do alias with the
- * corresponding bits in the per-ring interrupt control registers. */
-#define GT_GEN6_BLT_FLUSHDW_NOTIFY_INTERRUPT (1 << 26)
-#define GT_GEN6_BLT_CS_ERROR_INTERRUPT (1 << 25)
-#define GT_GEN6_BLT_USER_INTERRUPT (1 << 22)
-#define GT_GEN6_BSD_CS_ERROR_INTERRUPT (1 << 15)
-#define GT_GEN6_BSD_USER_INTERRUPT (1 << 12)
-#define GT_BSD_USER_INTERRUPT (1 << 5) /* ilk only */
-#define GT_GEN7_L3_PARITY_ERROR_INTERRUPT (1 << 5)
-#define GT_PIPE_NOTIFY (1 << 4)
-#define GT_RENDER_CS_ERROR_INTERRUPT (1 << 3)
-#define GT_SYNC_STATUS (1 << 2)
-#define GT_USER_INTERRUPT (1 << 0)
-
#define GTISR 0x44010
#define GTIMR 0x44014
#define GTIIR 0x44018
# define CHICKEN3_DGMG_REQ_OUT_FIX_DISABLE (1 << 5)
# define CHICKEN3_DGMG_DONE_FIX_DISABLE (1 << 2)
+#define CHICKEN_PAR1_1 0x42080
+#define FORCE_ARB_IDLE_PLANES (1 << 14)
+
#define DISP_ARB_CTL 0x45000
#define DISP_TILE_SURFACE_SWIZZLING (1<<13)
#define DISP_FBC_WM_DIS (1<<15)
#define GEN6_PM_RP_DOWN_THRESHOLD (1<<4)
#define GEN6_PM_RP_UP_EI_EXPIRED (1<<2)
#define GEN6_PM_RP_DOWN_EI_EXPIRED (1<<1)
-#define GEN6_PM_DEFERRED_EVENTS (GEN6_PM_RP_UP_THRESHOLD | \
+#define GEN6_PM_RPS_EVENTS (GEN6_PM_RP_UP_THRESHOLD | \
GEN6_PM_RP_DOWN_THRESHOLD | \
GEN6_PM_RP_DOWN_TIMEOUT)
#define GEN6_PCODE_FREQ_IA_RATIO_SHIFT 8
#define GEN6_PCODE_FREQ_RING_RATIO_SHIFT 16
-#define VLV_IOSF_DOORBELL_REQ 0x182100
-#define IOSF_DEVFN_SHIFT 24
-#define IOSF_OPCODE_SHIFT 16
-#define IOSF_PORT_SHIFT 8
-#define IOSF_BYTE_ENABLES_SHIFT 4
-#define IOSF_BAR_SHIFT 1
-#define IOSF_SB_BUSY (1<<0)
-#define IOSF_PORT_PUNIT 0x4
-#define IOSF_PORT_NC 0x11
-#define VLV_IOSF_DATA 0x182104
-#define VLV_IOSF_ADDR 0x182108
-
-#define PUNIT_OPCODE_REG_READ 6
-#define PUNIT_OPCODE_REG_WRITE 7
-
-#define PUNIT_REG_GPU_LFM 0xd3
-#define PUNIT_REG_GPU_FREQ_REQ 0xd4
-#define PUNIT_REG_GPU_FREQ_STS 0xd8
-#define PUNIT_REG_MEDIA_TURBO_FREQ_REQ 0xdc
-
-#define PUNIT_FUSE_BUS2 0xf6 /* bits 47:40 */
-#define PUNIT_FUSE_BUS1 0xf5 /* bits 55:48 */
-
-#define IOSF_NC_FB_GFX_FREQ_FUSE 0x1c
-#define FB_GFX_MAX_FREQ_FUSE_SHIFT 3
-#define FB_GFX_MAX_FREQ_FUSE_MASK 0x000007f8
-#define FB_GFX_FGUARANTEED_FREQ_FUSE_SHIFT 11
-#define FB_GFX_FGUARANTEED_FREQ_FUSE_MASK 0x0007f800
-#define IOSF_NC_FB_GFX_FMAX_FUSE_HI 0x34
-#define FB_FMAX_VMIN_FREQ_HI_MASK 0x00000007
-#define IOSF_NC_FB_GFX_FMAX_FUSE_LO 0x30
-#define FB_FMAX_VMIN_FREQ_LO_SHIFT 27
-#define FB_FMAX_VMIN_FREQ_LO_MASK 0xf8000000
-
#define GEN6_GT_CORE_STATUS 0x138060
#define GEN6_CORE_CPD_STATE_MASK (7<<4)
#define GEN6_RCn_MASK 7
#define SFUSE_STRAP_DDIC_DETECTED (1<<1)
#define SFUSE_STRAP_DDID_DETECTED (1<<0)
+#define WM_MISC 0x45260
+#define WM_MISC_DATA_PARTITION_5_6 (1 << 0)
+
#define WM_DBG 0x45280
#define WM_DBG_DISALLOW_MULTIPLE_LP (1<<0)
#define WM_DBG_DISALLOW_MAXFIFO (1<<1)
projects / cascardo / linux.git / blobdiff