{
struct intel_shared_dpll *pll;
struct intel_dpll_hw_state *state;
- intel_clock_t clock;
+ struct dpll clock;
/* For DDI ports we always use a shared PLL. */
if (WARN_ON(dpll == DPLL_ID_PRIVATE))
DRM_DEBUG_KMS("No pipe for ddi port %c found\n", port_name(port));
out:
+ if (ret && IS_BROXTON(dev_priv)) {
+ tmp = I915_READ(BXT_PHY_CTL(port));
+ if ((tmp & (BXT_PHY_LANE_POWERDOWN_ACK |
+ BXT_PHY_LANE_ENABLED)) != BXT_PHY_LANE_ENABLED)
+ DRM_ERROR("Port %c enabled but PHY powered down? "
+ "(PHY_CTL %08x)\n", port_name(port), tmp);
+ }
+
intel_display_power_put(dev_priv, power_domain);
return ret;
enum port port = intel_ddi_get_encoder_port(intel_encoder);
int type = intel_encoder->type;
+ if (type == INTEL_OUTPUT_HDMI) {
+ struct intel_hdmi *intel_hdmi = enc_to_intel_hdmi(encoder);
+
+ intel_dp_dual_mode_set_tmds_output(intel_hdmi, true);
+ }
+
intel_prepare_ddi_buffer(intel_encoder);
if (type == INTEL_OUTPUT_EDP) {
DPLL_CTRL2_DDI_CLK_OFF(port)));
else if (INTEL_INFO(dev)->gen < 9)
I915_WRITE(PORT_CLK_SEL(port), PORT_CLK_SEL_NONE);
+
+ if (type == INTEL_OUTPUT_HDMI) {
+ struct intel_hdmi *intel_hdmi = enc_to_intel_hdmi(encoder);
+
+ intel_dp_dual_mode_set_tmds_output(intel_hdmi, false);
+ }
}
static void intel_enable_ddi(struct intel_encoder *intel_encoder)
}
}
-static bool broxton_phy_is_enabled(struct drm_i915_private *dev_priv,
- enum dpio_phy phy)
+bool bxt_ddi_phy_is_enabled(struct drm_i915_private *dev_priv,
+ enum dpio_phy phy)
{
+ enum port port;
+
if (!(I915_READ(BXT_P_CR_GT_DISP_PWRON) & GT_DISPLAY_POWER_ON(phy)))
return false;
return false;
}
+ for_each_port_masked(port,
+ phy == DPIO_PHY0 ? BIT(PORT_B) | BIT(PORT_C) :
+ BIT(PORT_A)) {
+ u32 tmp = I915_READ(BXT_PHY_CTL(port));
+
+ if (tmp & BXT_PHY_CMNLANE_POWERDOWN_ACK) {
+ DRM_DEBUG_DRIVER("DDI PHY %d powered, but common lane "
+ "for port %c powered down "
+ "(PHY_CTL %08x)\n",
+ phy, port_name(port), tmp);
+
+ return false;
+ }
+ }
+
return true;
}
-static u32 broxton_get_grc(struct drm_i915_private *dev_priv, enum dpio_phy phy)
+static u32 bxt_get_grc(struct drm_i915_private *dev_priv, enum dpio_phy phy)
{
u32 val = I915_READ(BXT_PORT_REF_DW6(phy));
return (val & GRC_CODE_MASK) >> GRC_CODE_SHIFT;
}
-static void broxton_phy_wait_grc_done(struct drm_i915_private *dev_priv,
- enum dpio_phy phy)
+static void bxt_phy_wait_grc_done(struct drm_i915_private *dev_priv,
+ enum dpio_phy phy)
{
if (wait_for(I915_READ(BXT_PORT_REF_DW3(phy)) & GRC_DONE, 10))
DRM_ERROR("timeout waiting for PHY%d GRC\n", phy);
}
-static bool broxton_phy_verify_state(struct drm_i915_private *dev_priv,
- enum dpio_phy phy);
-
-static void broxton_phy_init(struct drm_i915_private *dev_priv,
- enum dpio_phy phy)
+void bxt_ddi_phy_init(struct drm_i915_private *dev_priv, enum dpio_phy phy)
{
- enum port port;
- u32 ports, val;
+ u32 val;
- if (broxton_phy_is_enabled(dev_priv, phy)) {
+ if (bxt_ddi_phy_is_enabled(dev_priv, phy)) {
/* Still read out the GRC value for state verification */
if (phy == DPIO_PHY0)
- dev_priv->bxt_phy_grc = broxton_get_grc(dev_priv, phy);
+ dev_priv->bxt_phy_grc = bxt_get_grc(dev_priv, phy);
- if (broxton_phy_verify_state(dev_priv, phy)) {
+ if (bxt_ddi_phy_verify_state(dev_priv, phy)) {
DRM_DEBUG_DRIVER("DDI PHY %d already enabled, "
"won't reprogram it\n", phy);
DRM_DEBUG_DRIVER("DDI PHY %d enabled with invalid state, "
"force reprogramming it\n", phy);
- } else {
- DRM_DEBUG_DRIVER("DDI PHY %d not enabled, enabling it\n", phy);
}
val = I915_READ(BXT_P_CR_GT_DISP_PWRON);
DRM_ERROR("timeout during PHY%d power on\n", phy);
}
- if (phy == DPIO_PHY0)
- ports = BIT(PORT_B) | BIT(PORT_C);
- else
- ports = BIT(PORT_A);
-
- for_each_port_masked(port, ports) {
- int lane;
-
- for (lane = 0; lane < 4; lane++) {
- val = I915_READ(BXT_PORT_TX_DW14_LN(port, lane));
- /*
- * Note that on CHV this flag is called UPAR, but has
- * the same function.
- */
- val &= ~LATENCY_OPTIM;
- if (lane != 1)
- val |= LATENCY_OPTIM;
-
- I915_WRITE(BXT_PORT_TX_DW14_LN(port, lane), val);
- }
- }
-
/* Program PLL Rcomp code offset */
val = I915_READ(BXT_PORT_CL1CM_DW9(phy));
val &= ~IREF0RC_OFFSET_MASK;
* the corresponding calibrated value from PHY1, and disable
* the automatic calibration on PHY0.
*/
- broxton_phy_wait_grc_done(dev_priv, DPIO_PHY1);
-
- val = dev_priv->bxt_phy_grc = broxton_get_grc(dev_priv,
- DPIO_PHY1);
+ val = dev_priv->bxt_phy_grc = bxt_get_grc(dev_priv, DPIO_PHY1);
grc_code = val << GRC_CODE_FAST_SHIFT |
val << GRC_CODE_SLOW_SHIFT |
val;
val |= GRC_DIS | GRC_RDY_OVRD;
I915_WRITE(BXT_PORT_REF_DW8(DPIO_PHY0), val);
}
- /*
- * During PHY1 init delay waiting for GRC calibration to finish, since
- * it can happen in parallel with the subsequent PHY0 init.
- */
val = I915_READ(BXT_PHY_CTL_FAMILY(phy));
val |= COMMON_RESET_DIS;
I915_WRITE(BXT_PHY_CTL_FAMILY(phy), val);
-}
-
-void broxton_ddi_phy_init(struct drm_i915_private *dev_priv)
-{
- /* Enable PHY1 first since it provides Rcomp for PHY0 */
- broxton_phy_init(dev_priv, DPIO_PHY1);
- broxton_phy_init(dev_priv, DPIO_PHY0);
- /*
- * If BIOS enabled only PHY0 and not PHY1, we skipped waiting for the
- * PHY1 GRC calibration to finish, so wait for it here.
- */
- broxton_phy_wait_grc_done(dev_priv, DPIO_PHY1);
+ if (phy == DPIO_PHY1)
+ bxt_phy_wait_grc_done(dev_priv, DPIO_PHY1);
}
-static void broxton_phy_uninit(struct drm_i915_private *dev_priv,
- enum dpio_phy phy)
+void bxt_ddi_phy_uninit(struct drm_i915_private *dev_priv, enum dpio_phy phy)
{
uint32_t val;
I915_WRITE(BXT_P_CR_GT_DISP_PWRON, val);
}
-void broxton_ddi_phy_uninit(struct drm_i915_private *dev_priv)
-{
- broxton_phy_uninit(dev_priv, DPIO_PHY1);
- broxton_phy_uninit(dev_priv, DPIO_PHY0);
-}
-
static bool __printf(6, 7)
__phy_reg_verify_state(struct drm_i915_private *dev_priv, enum dpio_phy phy,
i915_reg_t reg, u32 mask, u32 expected,
return false;
}
-static bool broxton_phy_verify_state(struct drm_i915_private *dev_priv,
- enum dpio_phy phy)
+bool bxt_ddi_phy_verify_state(struct drm_i915_private *dev_priv,
+ enum dpio_phy phy)
{
- enum port port;
- u32 ports;
uint32_t mask;
bool ok;
__phy_reg_verify_state(dev_priv, phy, reg, mask, exp, fmt, \
## __VA_ARGS__)
- /* We expect the PHY to be always enabled */
- if (!broxton_phy_is_enabled(dev_priv, phy))
+ if (!bxt_ddi_phy_is_enabled(dev_priv, phy))
return false;
ok = true;
- if (phy == DPIO_PHY0)
- ports = BIT(PORT_B) | BIT(PORT_C);
- else
- ports = BIT(PORT_A);
-
- for_each_port_masked(port, ports) {
- int lane;
-
- for (lane = 0; lane < 4; lane++)
- ok &= _CHK(BXT_PORT_TX_DW14_LN(port, lane),
- LATENCY_OPTIM,
- lane != 1 ? LATENCY_OPTIM : 0,
- "BXT_PORT_TX_DW14_LN(%d, %d)", port, lane);
- }
-
/* PLL Rcomp code offset */
ok &= _CHK(BXT_PORT_CL1CM_DW9(phy),
IREF0RC_OFFSET_MASK, 0xe4 << IREF0RC_OFFSET_SHIFT,
#undef _CHK
}
-void broxton_ddi_phy_verify_state(struct drm_i915_private *dev_priv)
+static uint8_t
+bxt_ddi_phy_calc_lane_lat_optim_mask(struct intel_encoder *encoder,
+ struct intel_crtc_state *pipe_config)
{
- if (!broxton_phy_verify_state(dev_priv, DPIO_PHY0) ||
- !broxton_phy_verify_state(dev_priv, DPIO_PHY1))
- i915_report_error(dev_priv, "DDI PHY state mismatch\n");
+ switch (pipe_config->lane_count) {
+ case 1:
+ return 0;
+ case 2:
+ return BIT(2) | BIT(0);
+ case 4:
+ return BIT(3) | BIT(2) | BIT(0);
+ default:
+ MISSING_CASE(pipe_config->lane_count);
+
+ return 0;
+ }
+}
+
+static void bxt_ddi_pre_pll_enable(struct intel_encoder *encoder)
+{
+ struct intel_digital_port *dport = enc_to_dig_port(&encoder->base);
+ struct drm_i915_private *dev_priv = to_i915(dport->base.base.dev);
+ enum port port = dport->port;
+ struct intel_crtc *intel_crtc = to_intel_crtc(encoder->base.crtc);
+ int lane;
+
+ for (lane = 0; lane < 4; lane++) {
+ u32 val = I915_READ(BXT_PORT_TX_DW14_LN(port, lane));
+
+ /*
+ * Note that on CHV this flag is called UPAR, but has
+ * the same function.
+ */
+ val &= ~LATENCY_OPTIM;
+ if (intel_crtc->config->lane_lat_optim_mask & BIT(lane))
+ val |= LATENCY_OPTIM;
+
+ I915_WRITE(BXT_PORT_TX_DW14_LN(port, lane), val);
+ }
+}
+
+static uint8_t
+bxt_ddi_phy_get_lane_lat_optim_mask(struct intel_encoder *encoder)
+{
+ struct intel_digital_port *dport = enc_to_dig_port(&encoder->base);
+ struct drm_i915_private *dev_priv = to_i915(dport->base.base.dev);
+ enum port port = dport->port;
+ int lane;
+ uint8_t mask;
+
+ mask = 0;
+ for (lane = 0; lane < 4; lane++) {
+ u32 val = I915_READ(BXT_PORT_TX_DW14_LN(port, lane));
+
+ if (val & LATENCY_OPTIM)
+ mask |= BIT(lane);
+ }
+
+ return mask;
}
void intel_ddi_prepare_link_retrain(struct intel_dp *intel_dp)
if (intel_hdmi->infoframe_enabled(&encoder->base, pipe_config))
pipe_config->has_infoframe = true;
- break;
+ /* fall through */
case TRANS_DDI_MODE_SELECT_DVI:
+ pipe_config->lane_count = 4;
+ break;
case TRANS_DDI_MODE_SELECT_FDI:
break;
case TRANS_DDI_MODE_SELECT_DP_SST:
}
intel_ddi_clock_get(encoder, pipe_config);
+
+ if (IS_BROXTON(dev_priv))
+ pipe_config->lane_lat_optim_mask =
+ bxt_ddi_phy_get_lane_lat_optim_mask(encoder);
}
static bool intel_ddi_compute_config(struct intel_encoder *encoder,
struct intel_crtc_state *pipe_config)
{
+ struct drm_i915_private *dev_priv = encoder->base.dev->dev_private;
int type = encoder->type;
int port = intel_ddi_get_encoder_port(encoder);
+ int ret;
WARN(type == INTEL_OUTPUT_UNKNOWN, "compute_config() on unknown output!\n");
pipe_config->cpu_transcoder = TRANSCODER_EDP;
if (type == INTEL_OUTPUT_HDMI)
- return intel_hdmi_compute_config(encoder, pipe_config);
+ ret = intel_hdmi_compute_config(encoder, pipe_config);
else
- return intel_dp_compute_config(encoder, pipe_config);
+ ret = intel_dp_compute_config(encoder, pipe_config);
+
+ if (IS_BROXTON(dev_priv) && ret)
+ pipe_config->lane_lat_optim_mask =
+ bxt_ddi_phy_calc_lane_lat_optim_mask(encoder,
+ pipe_config);
+
+ return ret;
+
}
static const struct drm_encoder_funcs intel_ddi_funcs = {
encoder = &intel_encoder->base;
drm_encoder_init(dev, encoder, &intel_ddi_funcs,
- DRM_MODE_ENCODER_TMDS, NULL);
+ DRM_MODE_ENCODER_TMDS, "DDI %c", port_name(port));
intel_encoder->compute_config = intel_ddi_compute_config;
intel_encoder->enable = intel_enable_ddi;
+ if (IS_BROXTON(dev_priv))
+ intel_encoder->pre_pll_enable = bxt_ddi_pre_pll_enable;
intel_encoder->pre_enable = intel_ddi_pre_enable;
intel_encoder->disable = intel_disable_ddi;
intel_encoder->post_disable = intel_ddi_post_disable;
projects / cascardo / linux.git / blobdiff