DRM_FORMAT_ABGR8888,
DRM_FORMAT_XRGB2101010,
DRM_FORMAT_XBGR2101010,
+ DRM_FORMAT_YUYV,
+ DRM_FORMAT_YVYU,
+ DRM_FORMAT_UYVY,
+ DRM_FORMAT_VYUY,
};
/* Cursor formats */
static void ironlake_pch_clock_get(struct intel_crtc *crtc,
struct intel_crtc_state *pipe_config);
-static int intel_set_mode(struct drm_crtc *crtc,
- struct drm_atomic_state *state,
- bool force_restore);
static int intel_framebuffer_init(struct drm_device *dev,
struct intel_framebuffer *ifb,
struct drm_mode_fb_cmd2 *mode_cmd,
const struct intel_crtc_state *pipe_config);
static void chv_prepare_pll(struct intel_crtc *crtc,
const struct intel_crtc_state *pipe_config);
-static void intel_begin_crtc_commit(struct drm_crtc *crtc);
-static void intel_finish_crtc_commit(struct drm_crtc *crtc);
+static void intel_begin_crtc_commit(struct drm_crtc *, struct drm_crtc_state *);
+static void intel_finish_crtc_commit(struct drm_crtc *, struct drm_crtc_state *);
static void skl_init_scalers(struct drm_device *dev, struct intel_crtc *intel_crtc,
struct intel_crtc_state *crtc_state);
static int i9xx_get_refclk(const struct intel_crtc_state *crtc_state,
int num_connectors);
-static void intel_crtc_enable_planes(struct drm_crtc *crtc);
-static void intel_crtc_disable_planes(struct drm_crtc *crtc);
-
-static struct intel_encoder *intel_find_encoder(struct intel_connector *connector, int pipe)
-{
- if (!connector->mst_port)
- return connector->encoder;
- else
- return &connector->mst_port->mst_encoders[pipe]->base;
-}
+static void intel_modeset_setup_hw_state(struct drm_device *dev);
typedef struct {
int min, max;
return I915_READ(PCH_RAWCLK_FREQ) & RAWCLK_FREQ_MASK;
}
+/* hrawclock is 1/4 the FSB frequency */
+int intel_hrawclk(struct drm_device *dev)
+{
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ uint32_t clkcfg;
+
+ /* There is no CLKCFG reg in Valleyview. VLV hrawclk is 200 MHz */
+ if (IS_VALLEYVIEW(dev))
+ return 200;
+
+ clkcfg = I915_READ(CLKCFG);
+ switch (clkcfg & CLKCFG_FSB_MASK) {
+ case CLKCFG_FSB_400:
+ return 100;
+ case CLKCFG_FSB_533:
+ return 133;
+ case CLKCFG_FSB_667:
+ return 166;
+ case CLKCFG_FSB_800:
+ return 200;
+ case CLKCFG_FSB_1067:
+ return 266;
+ case CLKCFG_FSB_1333:
+ return 333;
+ /* these two are just a guess; one of them might be right */
+ case CLKCFG_FSB_1600:
+ case CLKCFG_FSB_1600_ALT:
+ return 400;
+ default:
+ return 133;
+ }
+}
+
static inline u32 /* units of 100MHz */
intel_fdi_link_freq(struct drm_device *dev)
{
static const intel_limit_t intel_limits_bxt = {
/* FIXME: find real dot limits */
.dot = { .min = 0, .max = INT_MAX },
- .vco = { .min = 4800000, .max = 6480000 },
+ .vco = { .min = 4800000, .max = 6700000 },
.n = { .min = 1, .max = 1 },
.m1 = { .min = 2, .max = 2 },
/* FIXME: find real m2 limits */
.p2 = { .p2_slow = 1, .p2_fast = 20 },
};
-static void vlv_clock(int refclk, intel_clock_t *clock)
+static bool
+needs_modeset(struct drm_crtc_state *state)
{
- clock->m = clock->m1 * clock->m2;
- clock->p = clock->p1 * clock->p2;
- if (WARN_ON(clock->n == 0 || clock->p == 0))
- return;
- clock->vco = DIV_ROUND_CLOSEST(refclk * clock->m, clock->n);
- clock->dot = DIV_ROUND_CLOSEST(clock->vco, clock->p);
+ return drm_atomic_crtc_needs_modeset(state);
}
/**
return limit;
}
+/*
+ * Platform specific helpers to calculate the port PLL loopback- (clock.m),
+ * and post-divider (clock.p) values, pre- (clock.vco) and post-divided fast
+ * (clock.dot) clock rates. This fast dot clock is fed to the port's IO logic.
+ * The helpers' return value is the rate of the clock that is fed to the
+ * display engine's pipe which can be the above fast dot clock rate or a
+ * divided-down version of it.
+ */
/* m1 is reserved as 0 in Pineview, n is a ring counter */
-static void pineview_clock(int refclk, intel_clock_t *clock)
+static int pnv_calc_dpll_params(int refclk, intel_clock_t *clock)
{
clock->m = clock->m2 + 2;
clock->p = clock->p1 * clock->p2;
if (WARN_ON(clock->n == 0 || clock->p == 0))
- return;
+ return 0;
clock->vco = DIV_ROUND_CLOSEST(refclk * clock->m, clock->n);
clock->dot = DIV_ROUND_CLOSEST(clock->vco, clock->p);
+
+ return clock->dot;
}
static uint32_t i9xx_dpll_compute_m(struct dpll *dpll)
return 5 * (dpll->m1 + 2) + (dpll->m2 + 2);
}
-static void i9xx_clock(int refclk, intel_clock_t *clock)
+static int i9xx_calc_dpll_params(int refclk, intel_clock_t *clock)
{
clock->m = i9xx_dpll_compute_m(clock);
clock->p = clock->p1 * clock->p2;
if (WARN_ON(clock->n + 2 == 0 || clock->p == 0))
- return;
+ return 0;
clock->vco = DIV_ROUND_CLOSEST(refclk * clock->m, clock->n + 2);
clock->dot = DIV_ROUND_CLOSEST(clock->vco, clock->p);
+
+ return clock->dot;
}
-static void chv_clock(int refclk, intel_clock_t *clock)
+static int vlv_calc_dpll_params(int refclk, intel_clock_t *clock)
{
clock->m = clock->m1 * clock->m2;
clock->p = clock->p1 * clock->p2;
if (WARN_ON(clock->n == 0 || clock->p == 0))
- return;
+ return 0;
+ clock->vco = DIV_ROUND_CLOSEST(refclk * clock->m, clock->n);
+ clock->dot = DIV_ROUND_CLOSEST(clock->vco, clock->p);
+
+ return clock->dot / 5;
+}
+
+int chv_calc_dpll_params(int refclk, intel_clock_t *clock)
+{
+ clock->m = clock->m1 * clock->m2;
+ clock->p = clock->p1 * clock->p2;
+ if (WARN_ON(clock->n == 0 || clock->p == 0))
+ return 0;
clock->vco = DIV_ROUND_CLOSEST_ULL((uint64_t)refclk * clock->m,
clock->n << 22);
clock->dot = DIV_ROUND_CLOSEST(clock->vco, clock->p);
+
+ return clock->dot / 5;
}
#define INTELPllInvalid(s) do { /* DRM_DEBUG(s); */ return false; } while (0)
return true;
}
-static bool
-i9xx_find_best_dpll(const intel_limit_t *limit,
- struct intel_crtc_state *crtc_state,
- int target, int refclk, intel_clock_t *match_clock,
- intel_clock_t *best_clock)
+static int
+i9xx_select_p2_div(const intel_limit_t *limit,
+ const struct intel_crtc_state *crtc_state,
+ int target)
{
- struct intel_crtc *crtc = to_intel_crtc(crtc_state->base.crtc);
- struct drm_device *dev = crtc->base.dev;
- intel_clock_t clock;
- int err = target;
+ struct drm_device *dev = crtc_state->base.crtc->dev;
if (intel_pipe_will_have_type(crtc_state, INTEL_OUTPUT_LVDS)) {
/*
* single/dual channel state, if we even can.
*/
if (intel_is_dual_link_lvds(dev))
- clock.p2 = limit->p2.p2_fast;
+ return limit->p2.p2_fast;
else
- clock.p2 = limit->p2.p2_slow;
+ return limit->p2.p2_slow;
} else {
if (target < limit->p2.dot_limit)
- clock.p2 = limit->p2.p2_slow;
+ return limit->p2.p2_slow;
else
- clock.p2 = limit->p2.p2_fast;
+ return limit->p2.p2_fast;
}
+}
+
+static bool
+i9xx_find_best_dpll(const intel_limit_t *limit,
+ struct intel_crtc_state *crtc_state,
+ int target, int refclk, intel_clock_t *match_clock,
+ intel_clock_t *best_clock)
+{
+ struct drm_device *dev = crtc_state->base.crtc->dev;
+ intel_clock_t clock;
+ int err = target;
memset(best_clock, 0, sizeof(*best_clock));
+ clock.p2 = i9xx_select_p2_div(limit, crtc_state, target);
+
for (clock.m1 = limit->m1.min; clock.m1 <= limit->m1.max;
clock.m1++) {
for (clock.m2 = limit->m2.min;
clock.p1 <= limit->p1.max; clock.p1++) {
int this_err;
- i9xx_clock(refclk, &clock);
+ i9xx_calc_dpll_params(refclk, &clock);
if (!intel_PLL_is_valid(dev, limit,
&clock))
continue;
int target, int refclk, intel_clock_t *match_clock,
intel_clock_t *best_clock)
{
- struct intel_crtc *crtc = to_intel_crtc(crtc_state->base.crtc);
- struct drm_device *dev = crtc->base.dev;
+ struct drm_device *dev = crtc_state->base.crtc->dev;
intel_clock_t clock;
int err = target;
- if (intel_pipe_will_have_type(crtc_state, INTEL_OUTPUT_LVDS)) {
- /*
- * For LVDS just rely on its current settings for dual-channel.
- * We haven't figured out how to reliably set up different
- * single/dual channel state, if we even can.
- */
- if (intel_is_dual_link_lvds(dev))
- clock.p2 = limit->p2.p2_fast;
- else
- clock.p2 = limit->p2.p2_slow;
- } else {
- if (target < limit->p2.dot_limit)
- clock.p2 = limit->p2.p2_slow;
- else
- clock.p2 = limit->p2.p2_fast;
- }
-
memset(best_clock, 0, sizeof(*best_clock));
+ clock.p2 = i9xx_select_p2_div(limit, crtc_state, target);
+
for (clock.m1 = limit->m1.min; clock.m1 <= limit->m1.max;
clock.m1++) {
for (clock.m2 = limit->m2.min;
clock.p1 <= limit->p1.max; clock.p1++) {
int this_err;
- pineview_clock(refclk, &clock);
+ pnv_calc_dpll_params(refclk, &clock);
if (!intel_PLL_is_valid(dev, limit,
&clock))
continue;
int target, int refclk, intel_clock_t *match_clock,
intel_clock_t *best_clock)
{
- struct intel_crtc *crtc = to_intel_crtc(crtc_state->base.crtc);
- struct drm_device *dev = crtc->base.dev;
+ struct drm_device *dev = crtc_state->base.crtc->dev;
intel_clock_t clock;
int max_n;
- bool found;
+ bool found = false;
/* approximately equals target * 0.00585 */
int err_most = (target >> 8) + (target >> 9);
- found = false;
-
- if (intel_pipe_will_have_type(crtc_state, INTEL_OUTPUT_LVDS)) {
- if (intel_is_dual_link_lvds(dev))
- clock.p2 = limit->p2.p2_fast;
- else
- clock.p2 = limit->p2.p2_slow;
- } else {
- if (target < limit->p2.dot_limit)
- clock.p2 = limit->p2.p2_slow;
- else
- clock.p2 = limit->p2.p2_fast;
- }
memset(best_clock, 0, sizeof(*best_clock));
+
+ clock.p2 = i9xx_select_p2_div(limit, crtc_state, target);
+
max_n = limit->n.max;
/* based on hardware requirement, prefer smaller n to precision */
for (clock.n = limit->n.min; clock.n <= max_n; clock.n++) {
clock.p1 >= limit->p1.min; clock.p1--) {
int this_err;
- i9xx_clock(refclk, &clock);
+ i9xx_calc_dpll_params(refclk, &clock);
if (!intel_PLL_is_valid(dev, limit,
&clock))
continue;
clock.m2 = DIV_ROUND_CLOSEST(target * clock.p * clock.n,
refclk * clock.m1);
- vlv_clock(refclk, &clock);
+ vlv_calc_dpll_params(refclk, &clock);
if (!intel_PLL_is_valid(dev, limit,
&clock))
clock.m2 = m2;
- chv_clock(refclk, &clock);
+ chv_calc_dpll_params(refclk, &clock);
if (!intel_PLL_is_valid(dev, limit, &clock))
continue;
line_mask = DSL_LINEMASK_GEN3;
line1 = I915_READ(reg) & line_mask;
- mdelay(5);
+ msleep(5);
line2 = I915_READ(reg) & line_mask;
return line1 == line2;
}
}
-/*
- * ibx_digital_port_connected - is the specified port connected?
- * @dev_priv: i915 private structure
- * @port: the port to test
- *
- * Returns true if @port is connected, false otherwise.
- */
-bool ibx_digital_port_connected(struct drm_i915_private *dev_priv,
- struct intel_digital_port *port)
-{
- u32 bit;
-
- if (HAS_PCH_IBX(dev_priv->dev)) {
- switch (port->port) {
- case PORT_B:
- bit = SDE_PORTB_HOTPLUG;
- break;
- case PORT_C:
- bit = SDE_PORTC_HOTPLUG;
- break;
- case PORT_D:
- bit = SDE_PORTD_HOTPLUG;
- break;
- default:
- return true;
- }
- } else {
- switch (port->port) {
- case PORT_B:
- bit = SDE_PORTB_HOTPLUG_CPT;
- break;
- case PORT_C:
- bit = SDE_PORTC_HOTPLUG_CPT;
- break;
- case PORT_D:
- bit = SDE_PORTD_HOTPLUG_CPT;
- break;
- default:
- return true;
- }
- }
-
- return I915_READ(SDEISR) & bit;
-}
-
static const char *state_string(bool enabled)
{
return enabled ? "on" : "off";
assert_pch_hdmi_disabled(dev_priv, pipe, PCH_HDMID);
}
-static void intel_init_dpio(struct drm_device *dev)
-{
- struct drm_i915_private *dev_priv = dev->dev_private;
-
- if (!IS_VALLEYVIEW(dev))
- return;
-
- /*
- * IOSF_PORT_DPIO is used for VLV x2 PHY (DP/HDMI B and C),
- * CHV x1 PHY (DP/HDMI D)
- * IOSF_PORT_DPIO_2 is used for CHV x2 PHY (DP/HDMI B and C)
- */
- if (IS_CHERRYVIEW(dev)) {
- DPIO_PHY_IOSF_PORT(DPIO_PHY0) = IOSF_PORT_DPIO_2;
- DPIO_PHY_IOSF_PORT(DPIO_PHY1) = IOSF_PORT_DPIO;
- } else {
- DPIO_PHY_IOSF_PORT(DPIO_PHY0) = IOSF_PORT_DPIO;
- }
-}
-
static void vlv_enable_pll(struct intel_crtc *crtc,
const struct intel_crtc_state *pipe_config)
{
int count = 0;
for_each_intel_crtc(dev, crtc)
- count += crtc->active &&
+ count += crtc->base.state->active &&
intel_pipe_has_type(crtc, INTEL_OUTPUT_DVO);
return count;
/* Disable DVO 2x clock on both PLLs if necessary */
if (IS_I830(dev) &&
intel_pipe_has_type(crtc, INTEL_OUTPUT_DVO) &&
- intel_num_dvo_pipes(dev) == 1) {
+ !intel_num_dvo_pipes(dev)) {
I915_WRITE(DPLL(PIPE_B),
I915_READ(DPLL(PIPE_B)) & ~DPLL_DVO_2X_MODE);
I915_WRITE(DPLL(PIPE_A),
/* Make sure the pipe isn't still relying on us */
assert_pipe_disabled(dev_priv, pipe);
- I915_WRITE(DPLL(pipe), 0);
+ I915_WRITE(DPLL(pipe), DPLL_VGA_MODE_DIS);
POSTING_READ(DPLL(pipe));
}
static void vlv_disable_pll(struct drm_i915_private *dev_priv, enum pipe pipe)
{
- u32 val = 0;
+ u32 val;
/* Make sure the pipe isn't still relying on us */
assert_pipe_disabled(dev_priv, pipe);
* Leave integrated clock source and reference clock enabled for pipe B.
* The latter is needed for VGA hotplug / manual detection.
*/
+ val = DPLL_VGA_MODE_DIS;
if (pipe == PIPE_B)
- val = DPLL_INTEGRATED_CRI_CLK_VLV | DPLL_REFA_CLK_ENABLE_VLV;
+ val = DPLL_INTEGRATED_CRI_CLK_VLV | DPLL_REF_CLK_ENABLE_VLV;
I915_WRITE(DPLL(pipe), val);
POSTING_READ(DPLL(pipe));
assert_pipe_disabled(dev_priv, pipe);
/* Set PLL en = 0 */
- val = DPLL_SSC_REF_CLOCK_CHV | DPLL_REFA_CLK_ENABLE_VLV;
+ val = DPLL_SSC_REF_CLK_CHV |
+ DPLL_REF_CLK_ENABLE_VLV | DPLL_VGA_MODE_DIS;
if (pipe != PIPE_A)
val |= DPLL_INTEGRATED_CRI_CLK_VLV;
I915_WRITE(DPLL(pipe), val);
val &= ~DPIO_DCLKP_EN;
vlv_dpio_write(dev_priv, pipe, CHV_CMN_DW14(port), val);
- /* disable left/right clock distribution */
- if (pipe != PIPE_B) {
- val = vlv_dpio_read(dev_priv, pipe, _CHV_CMN_DW5_CH0);
- val &= ~(CHV_BUFLEFTENA1_MASK | CHV_BUFRIGHTENA1_MASK);
- vlv_dpio_write(dev_priv, pipe, _CHV_CMN_DW5_CH0, val);
- } else {
- val = vlv_dpio_read(dev_priv, pipe, _CHV_CMN_DW1_CH1);
- val &= ~(CHV_BUFLEFTENA2_MASK | CHV_BUFRIGHTENA2_MASK);
- vlv_dpio_write(dev_priv, pipe, _CHV_CMN_DW1_CH1, val);
- }
-
mutex_unlock(&dev_priv->sb_lock);
}
struct intel_shared_dpll *pll = intel_crtc_to_shared_dpll(crtc);
/* PCH only available on ILK+ */
- BUG_ON(INTEL_INFO(dev)->gen < 5);
- if (WARN_ON(pll == NULL))
- return;
+ if (INTEL_INFO(dev)->gen < 5)
+ return;
- if (WARN_ON(pll->config.crtc_mask == 0))
+ if (pll == NULL)
+ return;
+
+ if (WARN_ON(!(pll->config.crtc_mask & (1 << drm_crtc_index(&crtc->base)))))
return;
DRM_DEBUG_KMS("disable %s (active %d, on? %d) for crtc %d\n",
if (HAS_PCH_IBX(dev_priv->dev)) {
/*
- * make the BPC in transcoder be consistent with
- * that in pipeconf reg.
+ * Make the BPC in transcoder be consistent with
+ * that in pipeconf reg. For HDMI we must use 8bpc
+ * here for both 8bpc and 12bpc.
*/
val &= ~PIPECONF_BPC_MASK;
- val |= pipeconf_val & PIPECONF_BPC_MASK;
+ if (intel_pipe_has_type(intel_crtc, INTEL_OUTPUT_HDMI))
+ val |= PIPECONF_8BPC;
+ else
+ val |= pipeconf_val & PIPECONF_BPC_MASK;
}
val &= ~TRANS_INTERLACE_MASK;
int reg;
u32 val;
+ DRM_DEBUG_KMS("enabling pipe %c\n", pipe_name(pipe));
+
assert_planes_disabled(dev_priv, pipe);
assert_cursor_disabled(dev_priv, pipe);
assert_sprites_disabled(dev_priv, pipe);
int reg;
u32 val;
+ DRM_DEBUG_KMS("disabling pipe %c\n", pipe_name(pipe));
+
/*
* Make sure planes won't keep trying to pump pixels to us,
* or we might hang the display.
intel_wait_for_pipe_off(crtc);
}
-/**
- * intel_enable_primary_hw_plane - enable the primary plane on a given pipe
- * @plane: plane to be enabled
- * @crtc: crtc for the plane
- *
- * Enable @plane on @crtc, making sure that the pipe is running first.
- */
-static void intel_enable_primary_hw_plane(struct drm_plane *plane,
- struct drm_crtc *crtc)
-{
- struct drm_device *dev = plane->dev;
- struct drm_i915_private *dev_priv = dev->dev_private;
- struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
-
- /* If the pipe isn't enabled, we can't pump pixels and may hang */
- assert_pipe_enabled(dev_priv, intel_crtc->pipe);
- to_intel_plane_state(plane->state)->visible = true;
-
- dev_priv->display.update_primary_plane(crtc, plane->fb,
- crtc->x, crtc->y);
-}
-
static bool need_vtd_wa(struct drm_device *dev)
{
#ifdef CONFIG_INTEL_IOMMU
const struct drm_plane_state *plane_state)
{
struct intel_rotation_info *info = &view->rotation_info;
+ unsigned int tile_height, tile_pitch;
*view = i915_ggtt_view_normal;
info->pitch = fb->pitches[0];
info->fb_modifier = fb->modifier[0];
+ tile_height = intel_tile_height(fb->dev, fb->pixel_format,
+ fb->modifier[0]);
+ tile_pitch = PAGE_SIZE / tile_height;
+ info->width_pages = DIV_ROUND_UP(fb->pitches[0], tile_pitch);
+ info->height_pages = DIV_ROUND_UP(fb->height, tile_height);
+ info->size = info->width_pages * info->height_pages * PAGE_SIZE;
+
return 0;
}
+static unsigned int intel_linear_alignment(struct drm_i915_private *dev_priv)
+{
+ if (INTEL_INFO(dev_priv)->gen >= 9)
+ return 256 * 1024;
+ else if (IS_BROADWATER(dev_priv) || IS_CRESTLINE(dev_priv) ||
+ IS_VALLEYVIEW(dev_priv))
+ return 128 * 1024;
+ else if (INTEL_INFO(dev_priv)->gen >= 4)
+ return 4 * 1024;
+ else
+ return 0;
+}
+
int
intel_pin_and_fence_fb_obj(struct drm_plane *plane,
struct drm_framebuffer *fb,
const struct drm_plane_state *plane_state,
- struct intel_engine_cs *pipelined)
+ struct intel_engine_cs *pipelined,
+ struct drm_i915_gem_request **pipelined_request)
{
struct drm_device *dev = fb->dev;
struct drm_i915_private *dev_priv = dev->dev_private;
switch (fb->modifier[0]) {
case DRM_FORMAT_MOD_NONE:
- if (INTEL_INFO(dev)->gen >= 9)
- alignment = 256 * 1024;
- else if (IS_BROADWATER(dev) || IS_CRESTLINE(dev))
- alignment = 128 * 1024;
- else if (INTEL_INFO(dev)->gen >= 4)
- alignment = 4 * 1024;
- else
- alignment = 64 * 1024;
+ alignment = intel_linear_alignment(dev_priv);
break;
case I915_FORMAT_MOD_X_TILED:
if (INTEL_INFO(dev)->gen >= 9)
dev_priv->mm.interruptible = false;
ret = i915_gem_object_pin_to_display_plane(obj, alignment, pipelined,
- &view);
+ pipelined_request, &view);
if (ret)
goto err_interruptible;
* a fence as the cost is not that onerous.
*/
ret = i915_gem_object_get_fence(obj);
- if (ret)
+ if (ret == -EDEADLK) {
+ /*
+ * -EDEADLK means there are no free fences
+ * no pending flips.
+ *
+ * This is propagated to atomic, but it uses
+ * -EDEADLK to force a locking recovery, so
+ * change the returned error to -EBUSY.
+ */
+ ret = -EBUSY;
+ goto err_unpin;
+ } else if (ret)
goto err_unpin;
i915_gem_object_pin_fence(obj);
/* Computes the linear offset to the base tile and adjusts x, y. bytes per pixel
* is assumed to be a power-of-two. */
-unsigned long intel_gen4_compute_page_offset(int *x, int *y,
+unsigned long intel_gen4_compute_page_offset(struct drm_i915_private *dev_priv,
+ int *x, int *y,
unsigned int tiling_mode,
unsigned int cpp,
unsigned int pitch)
return tile_rows * pitch * 8 + tiles * 4096;
} else {
+ unsigned int alignment = intel_linear_alignment(dev_priv) - 1;
unsigned int offset;
offset = *y * pitch + *x * cpp;
- *y = 0;
- *x = (offset & 4095) / cpp;
- return offset & -4096;
+ *y = (offset & alignment) / pitch;
+ *x = ((offset & alignment) - *y * pitch) / cpp;
+ return offset & ~alignment;
}
}
struct intel_crtc *i;
struct drm_i915_gem_object *obj;
struct drm_plane *primary = intel_crtc->base.primary;
+ struct drm_plane_state *plane_state = primary->state;
struct drm_framebuffer *fb;
if (!plane_config->fb)
return;
valid_fb:
+ plane_state->src_x = plane_state->src_y = 0;
+ plane_state->src_w = fb->width << 16;
+ plane_state->src_h = fb->height << 16;
+
+ plane_state->crtc_x = plane_state->src_y = 0;
+ plane_state->crtc_w = fb->width;
+ plane_state->crtc_h = fb->height;
+
obj = intel_fb_obj(fb);
if (obj->tiling_mode != I915_TILING_NONE)
dev_priv->preserve_bios_swizzle = true;
- primary->fb = fb;
- primary->state->crtc = &intel_crtc->base;
- primary->crtc = &intel_crtc->base;
- update_state_fb(primary);
- obj->frontbuffer_bits |= INTEL_FRONTBUFFER_PRIMARY(intel_crtc->pipe);
+ drm_framebuffer_reference(fb);
+ primary->fb = primary->state->fb = fb;
+ primary->crtc = primary->state->crtc = &intel_crtc->base;
+ intel_crtc->base.state->plane_mask |= (1 << drm_plane_index(primary));
+ obj->frontbuffer_bits |= to_intel_plane(primary)->frontbuffer_bit;
}
static void i9xx_update_primary_plane(struct drm_crtc *crtc,
if (INTEL_INFO(dev)->gen >= 4) {
intel_crtc->dspaddr_offset =
- intel_gen4_compute_page_offset(&x, &y, obj->tiling_mode,
+ intel_gen4_compute_page_offset(dev_priv,
+ &x, &y, obj->tiling_mode,
pixel_size,
fb->pitches[0]);
linear_offset -= intel_crtc->dspaddr_offset;
linear_offset = y * fb->pitches[0] + x * pixel_size;
intel_crtc->dspaddr_offset =
- intel_gen4_compute_page_offset(&x, &y, obj->tiling_mode,
+ intel_gen4_compute_page_offset(dev_priv,
+ &x, &y, obj->tiling_mode,
pixel_size,
fb->pitches[0]);
linear_offset -= intel_crtc->dspaddr_offset;
return i915_gem_obj_ggtt_offset_view(obj, view);
}
+static void skl_detach_scaler(struct intel_crtc *intel_crtc, int id)
+{
+ struct drm_device *dev = intel_crtc->base.dev;
+ struct drm_i915_private *dev_priv = dev->dev_private;
+
+ I915_WRITE(SKL_PS_CTRL(intel_crtc->pipe, id), 0);
+ I915_WRITE(SKL_PS_WIN_POS(intel_crtc->pipe, id), 0);
+ I915_WRITE(SKL_PS_WIN_SZ(intel_crtc->pipe, id), 0);
+}
+
/*
* This function detaches (aka. unbinds) unused scalers in hardware
*/
-void skl_detach_scalers(struct intel_crtc *intel_crtc)
+static void skl_detach_scalers(struct intel_crtc *intel_crtc)
{
- struct drm_device *dev;
- struct drm_i915_private *dev_priv;
struct intel_crtc_scaler_state *scaler_state;
int i;
- if (!intel_crtc || !intel_crtc->config)
- return;
-
- dev = intel_crtc->base.dev;
- dev_priv = dev->dev_private;
scaler_state = &intel_crtc->config->scaler_state;
/* loop through and disable scalers that aren't in use */
for (i = 0; i < intel_crtc->num_scalers; i++) {
- if (!scaler_state->scalers[i].in_use) {
- I915_WRITE(SKL_PS_CTRL(intel_crtc->pipe, i), 0);
- I915_WRITE(SKL_PS_WIN_POS(intel_crtc->pipe, i), 0);
- I915_WRITE(SKL_PS_WIN_SZ(intel_crtc->pipe, i), 0);
- DRM_DEBUG_KMS("CRTC:%d Disabled scaler id %u.%u\n",
- intel_crtc->base.base.id, intel_crtc->pipe, i);
- }
+ if (!scaler_state->scalers[i].in_use)
+ skl_detach_scaler(intel_crtc, i);
}
}
struct drm_device *dev = crtc->dev;
struct drm_i915_private *dev_priv = dev->dev_private;
- if (dev_priv->display.disable_fbc)
- dev_priv->display.disable_fbc(dev);
+ if (dev_priv->fbc.disable_fbc)
+ dev_priv->fbc.disable_fbc(dev_priv);
dev_priv->display.update_primary_plane(crtc, fb, x, y);
static void intel_update_primary_planes(struct drm_device *dev)
{
- struct drm_i915_private *dev_priv = dev->dev_private;
struct drm_crtc *crtc;
for_each_crtc(dev, crtc) {
- struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+ struct intel_plane *plane = to_intel_plane(crtc->primary);
+ struct intel_plane_state *plane_state;
- drm_modeset_lock(&crtc->mutex, NULL);
- /*
- * FIXME: Once we have proper support for primary planes (and
- * disabling them without disabling the entire crtc) allow again
- * a NULL crtc->primary->fb.
- */
- if (intel_crtc->active && crtc->primary->fb)
- dev_priv->display.update_primary_plane(crtc,
- crtc->primary->fb,
- crtc->x,
- crtc->y);
- drm_modeset_unlock(&crtc->mutex);
- }
-}
+ drm_modeset_lock_crtc(crtc, &plane->base);
-void intel_crtc_reset(struct intel_crtc *crtc)
-{
- struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
+ plane_state = to_intel_plane_state(plane->base.state);
- if (!crtc->active)
- return;
+ if (plane_state->base.fb)
+ plane->commit_plane(&plane->base, plane_state);
- intel_crtc_disable_planes(&crtc->base);
- dev_priv->display.crtc_disable(&crtc->base);
- dev_priv->display.crtc_enable(&crtc->base);
- intel_crtc_enable_planes(&crtc->base);
+ drm_modeset_unlock_crtc(crtc);
+ }
}
void intel_prepare_reset(struct drm_device *dev)
{
- struct drm_i915_private *dev_priv = to_i915(dev);
- struct intel_crtc *crtc;
-
/* no reset support for gen2 */
if (IS_GEN2(dev))
return;
return;
drm_modeset_lock_all(dev);
-
/*
* Disabling the crtcs gracefully seems nicer. Also the
* g33 docs say we should at least disable all the planes.
*/
- for_each_intel_crtc(dev, crtc) {
- if (!crtc->active)
- continue;
-
- intel_crtc_disable_planes(&crtc->base);
- dev_priv->display.crtc_disable(&crtc->base);
- }
+ intel_display_suspend(dev);
}
void intel_finish_reset(struct drm_device *dev)
* so update the base address of all primary
* planes to the the last fb to make sure we're
* showing the correct fb after a reset.
+ *
+ * FIXME: Atomic will make this obsolete since we won't schedule
+ * CS-based flips (which might get lost in gpu resets) any more.
*/
intel_update_primary_planes(dev);
return;
dev_priv->display.hpd_irq_setup(dev);
spin_unlock_irq(&dev_priv->irq_lock);
- intel_modeset_setup_hw_state(dev, true);
+ intel_display_resume(dev);
intel_hpd_init(dev_priv);
lpt_enable_pch_transcoder(dev_priv, cpu_transcoder);
}
-void intel_put_shared_dpll(struct intel_crtc *crtc)
-{
- struct intel_shared_dpll *pll = intel_crtc_to_shared_dpll(crtc);
-
- if (pll == NULL)
- return;
-
- if (!(pll->config.crtc_mask & (1 << crtc->pipe))) {
- WARN(1, "bad %s crtc mask\n", pll->name);
- return;
- }
-
- pll->config.crtc_mask &= ~(1 << crtc->pipe);
- if (pll->config.crtc_mask == 0) {
- WARN_ON(pll->on);
- WARN_ON(pll->active);
- }
-
- crtc->config->shared_dpll = DPLL_ID_PRIVATE;
-}
-
struct intel_shared_dpll *intel_get_shared_dpll(struct intel_crtc *crtc,
struct intel_crtc_state *crtc_state)
{
struct drm_i915_private *dev_priv = crtc->base.dev->dev_private;
struct intel_shared_dpll *pll;
+ struct intel_shared_dpll_config *shared_dpll;
enum intel_dpll_id i;
+ shared_dpll = intel_atomic_get_shared_dpll_state(crtc_state->base.state);
+
if (HAS_PCH_IBX(dev_priv->dev)) {
/* Ironlake PCH has a fixed PLL->PCH pipe mapping. */
i = (enum intel_dpll_id) crtc->pipe;
DRM_DEBUG_KMS("CRTC:%d using pre-allocated %s\n",
crtc->base.base.id, pll->name);
- WARN_ON(pll->new_config->crtc_mask);
+ WARN_ON(shared_dpll[i].crtc_mask);
goto found;
}
pll = &dev_priv->shared_dplls[i];
DRM_DEBUG_KMS("CRTC:%d using pre-allocated %s\n",
crtc->base.base.id, pll->name);
- WARN_ON(pll->new_config->crtc_mask);
+ WARN_ON(shared_dpll[i].crtc_mask);
goto found;
}
pll = &dev_priv->shared_dplls[i];
/* Only want to check enabled timings first */
- if (pll->new_config->crtc_mask == 0)
+ if (shared_dpll[i].crtc_mask == 0)
continue;
if (memcmp(&crtc_state->dpll_hw_state,
- &pll->new_config->hw_state,
- sizeof(pll->new_config->hw_state)) == 0) {
+ &shared_dpll[i].hw_state,
+ sizeof(crtc_state->dpll_hw_state)) == 0) {
DRM_DEBUG_KMS("CRTC:%d sharing existing %s (crtc mask 0x%08x, ative %d)\n",
crtc->base.base.id, pll->name,
- pll->new_config->crtc_mask,
+ shared_dpll[i].crtc_mask,
pll->active);
goto found;
}
/* Ok no matching timings, maybe there's a free one? */
for (i = 0; i < dev_priv->num_shared_dpll; i++) {
pll = &dev_priv->shared_dplls[i];
- if (pll->new_config->crtc_mask == 0) {
+ if (shared_dpll[i].crtc_mask == 0) {
DRM_DEBUG_KMS("CRTC:%d allocated %s\n",
crtc->base.base.id, pll->name);
goto found;
return NULL;
found:
- if (pll->new_config->crtc_mask == 0)
- pll->new_config->hw_state = crtc_state->dpll_hw_state;
+ if (shared_dpll[i].crtc_mask == 0)
+ shared_dpll[i].hw_state =
+ crtc_state->dpll_hw_state;
crtc_state->shared_dpll = i;
DRM_DEBUG_DRIVER("using %s for pipe %c\n", pll->name,
pipe_name(crtc->pipe));
- pll->new_config->crtc_mask |= 1 << crtc->pipe;
+ shared_dpll[i].crtc_mask |= 1 << crtc->pipe;
return pll;
}
-/**
- * intel_shared_dpll_start_config - start a new PLL staged config
- * @dev_priv: DRM device
- * @clear_pipes: mask of pipes that will have their PLLs freed
- *
- * Starts a new PLL staged config, copying the current config but
- * releasing the references of pipes specified in clear_pipes.
- */
-static int intel_shared_dpll_start_config(struct drm_i915_private *dev_priv,
- unsigned clear_pipes)
+static void intel_shared_dpll_commit(struct drm_atomic_state *state)
{
+ struct drm_i915_private *dev_priv = to_i915(state->dev);
+ struct intel_shared_dpll_config *shared_dpll;
struct intel_shared_dpll *pll;
enum intel_dpll_id i;
- for (i = 0; i < dev_priv->num_shared_dpll; i++) {
- pll = &dev_priv->shared_dplls[i];
-
- pll->new_config = kmemdup(&pll->config, sizeof pll->config,
- GFP_KERNEL);
- if (!pll->new_config)
- goto cleanup;
-
- pll->new_config->crtc_mask &= ~clear_pipes;
- }
-
- return 0;
+ if (!to_intel_atomic_state(state)->dpll_set)
+ return;
-cleanup:
- while (--i >= 0) {
+ shared_dpll = to_intel_atomic_state(state)->shared_dpll;
+ for (i = 0; i < dev_priv->num_shared_dpll; i++) {
pll = &dev_priv->shared_dplls[i];
- kfree(pll->new_config);
- pll->new_config = NULL;
+ pll->config = shared_dpll[i];
}
-
- return -ENOMEM;
}
-static void intel_shared_dpll_commit(struct drm_i915_private *dev_priv)
+static void cpt_verify_modeset(struct drm_device *dev, int pipe)
{
- struct intel_shared_dpll *pll;
- enum intel_dpll_id i;
-
- for (i = 0; i < dev_priv->num_shared_dpll; i++) {
- pll = &dev_priv->shared_dplls[i];
-
- WARN_ON(pll->new_config == &pll->config);
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ int dslreg = PIPEDSL(pipe);
+ u32 temp;
- pll->config = *pll->new_config;
- kfree(pll->new_config);
- pll->new_config = NULL;
+ temp = I915_READ(dslreg);
+ udelay(500);
+ if (wait_for(I915_READ(dslreg) != temp, 5)) {
+ if (wait_for(I915_READ(dslreg) != temp, 5))
+ DRM_ERROR("mode set failed: pipe %c stuck\n", pipe_name(pipe));
}
}
-static void intel_shared_dpll_abort_config(struct drm_i915_private *dev_priv)
-{
- struct intel_shared_dpll *pll;
- enum intel_dpll_id i;
-
- for (i = 0; i < dev_priv->num_shared_dpll; i++) {
- pll = &dev_priv->shared_dplls[i];
-
- WARN_ON(pll->new_config == &pll->config);
-
- kfree(pll->new_config);
- pll->new_config = NULL;
- }
-}
-
-static void cpt_verify_modeset(struct drm_device *dev, int pipe)
-{
- struct drm_i915_private *dev_priv = dev->dev_private;
- int dslreg = PIPEDSL(pipe);
- u32 temp;
-
- temp = I915_READ(dslreg);
- udelay(500);
- if (wait_for(I915_READ(dslreg) != temp, 5)) {
- if (wait_for(I915_READ(dslreg) != temp, 5))
- DRM_ERROR("mode set failed: pipe %c stuck\n", pipe_name(pipe));
- }
-}
-
-/**
- * skl_update_scaler_users - Stages update to crtc's scaler state
- * @intel_crtc: crtc
- * @crtc_state: crtc_state
- * @plane: plane (NULL indicates crtc is requesting update)
- * @plane_state: plane's state
- * @force_detach: request unconditional detachment of scaler
- *
- * This function updates scaler state for requested plane or crtc.
- * To request scaler usage update for a plane, caller shall pass plane pointer.
- * To request scaler usage update for crtc, caller shall pass plane pointer
- * as NULL.
- *
- * Return
- * 0 - scaler_usage updated successfully
- * error - requested scaling cannot be supported or other error condition
- */
-int
-skl_update_scaler_users(
- struct intel_crtc *intel_crtc, struct intel_crtc_state *crtc_state,
- struct intel_plane *intel_plane, struct intel_plane_state *plane_state,
- int force_detach)
+static int
+skl_update_scaler(struct intel_crtc_state *crtc_state, bool force_detach,
+ unsigned scaler_user, int *scaler_id, unsigned int rotation,
+ int src_w, int src_h, int dst_w, int dst_h)
{
+ struct intel_crtc_scaler_state *scaler_state =
+ &crtc_state->scaler_state;
+ struct intel_crtc *intel_crtc =
+ to_intel_crtc(crtc_state->base.crtc);
int need_scaling;
- int idx;
- int src_w, src_h, dst_w, dst_h;
- int *scaler_id;
- struct drm_framebuffer *fb;
- struct intel_crtc_scaler_state *scaler_state;
- unsigned int rotation;
-
- if (!intel_crtc || !crtc_state)
- return 0;
-
- scaler_state = &crtc_state->scaler_state;
-
- idx = intel_plane ? drm_plane_index(&intel_plane->base) : SKL_CRTC_INDEX;
- fb = intel_plane ? plane_state->base.fb : NULL;
-
- if (intel_plane) {
- src_w = drm_rect_width(&plane_state->src) >> 16;
- src_h = drm_rect_height(&plane_state->src) >> 16;
- dst_w = drm_rect_width(&plane_state->dst);
- dst_h = drm_rect_height(&plane_state->dst);
- scaler_id = &plane_state->scaler_id;
- rotation = plane_state->base.rotation;
- } else {
- struct drm_display_mode *adjusted_mode =
- &crtc_state->base.adjusted_mode;
- src_w = crtc_state->pipe_src_w;
- src_h = crtc_state->pipe_src_h;
- dst_w = adjusted_mode->hdisplay;
- dst_h = adjusted_mode->vdisplay;
- scaler_id = &scaler_state->scaler_id;
- rotation = DRM_ROTATE_0;
- }
need_scaling = intel_rotation_90_or_270(rotation) ?
(src_h != dst_w || src_w != dst_h):
* update to free the scaler is done in plane/panel-fit programming.
* For this purpose crtc/plane_state->scaler_id isn't reset here.
*/
- if (force_detach || !need_scaling || (intel_plane &&
- (!fb || !plane_state->visible))) {
+ if (force_detach || !need_scaling) {
if (*scaler_id >= 0) {
- scaler_state->scaler_users &= ~(1 << idx);
+ scaler_state->scaler_users &= ~(1 << scaler_user);
scaler_state->scalers[*scaler_id].in_use = 0;
- DRM_DEBUG_KMS("Staged freeing scaler id %d.%d from %s:%d "
- "crtc_state = %p scaler_users = 0x%x\n",
- intel_crtc->pipe, *scaler_id, intel_plane ? "PLANE" : "CRTC",
- intel_plane ? intel_plane->base.base.id :
- intel_crtc->base.base.id, crtc_state,
+ DRM_DEBUG_KMS("scaler_user index %u.%u: "
+ "Staged freeing scaler id %d scaler_users = 0x%x\n",
+ intel_crtc->pipe, scaler_user, *scaler_id,
scaler_state->scaler_users);
*scaler_id = -1;
}
src_w > SKL_MAX_SRC_W || src_h > SKL_MAX_SRC_H ||
dst_w > SKL_MAX_DST_W || dst_h > SKL_MAX_DST_H) {
- DRM_DEBUG_KMS("%s:%d scaler_user index %u.%u: src %ux%u dst %ux%u "
+ DRM_DEBUG_KMS("scaler_user index %u.%u: src %ux%u dst %ux%u "
"size is out of scaler range\n",
- intel_plane ? "PLANE" : "CRTC",
- intel_plane ? intel_plane->base.base.id : intel_crtc->base.base.id,
- intel_crtc->pipe, idx, src_w, src_h, dst_w, dst_h);
+ intel_crtc->pipe, scaler_user, src_w, src_h, dst_w, dst_h);
return -EINVAL;
}
+ /* mark this plane as a scaler user in crtc_state */
+ scaler_state->scaler_users |= (1 << scaler_user);
+ DRM_DEBUG_KMS("scaler_user index %u.%u: "
+ "staged scaling request for %ux%u->%ux%u scaler_users = 0x%x\n",
+ intel_crtc->pipe, scaler_user, src_w, src_h, dst_w, dst_h,
+ scaler_state->scaler_users);
+
+ return 0;
+}
+
+/**
+ * skl_update_scaler_crtc - Stages update to scaler state for a given crtc.
+ *
+ * @state: crtc's scaler state
+ *
+ * Return
+ * 0 - scaler_usage updated successfully
+ * error - requested scaling cannot be supported or other error condition
+ */
+int skl_update_scaler_crtc(struct intel_crtc_state *state)
+{
+ struct intel_crtc *intel_crtc = to_intel_crtc(state->base.crtc);
+ struct drm_display_mode *adjusted_mode =
+ &state->base.adjusted_mode;
+
+ DRM_DEBUG_KMS("Updating scaler for [CRTC:%i] scaler_user index %u.%u\n",
+ intel_crtc->base.base.id, intel_crtc->pipe, SKL_CRTC_INDEX);
+
+ return skl_update_scaler(state, !state->base.active, SKL_CRTC_INDEX,
+ &state->scaler_state.scaler_id, DRM_ROTATE_0,
+ state->pipe_src_w, state->pipe_src_h,
+ adjusted_mode->hdisplay, adjusted_mode->vdisplay);
+}
+
+/**
+ * skl_update_scaler_plane - Stages update to scaler state for a given plane.
+ *
+ * @state: crtc's scaler state
+ * @plane_state: atomic plane state to update
+ *
+ * Return
+ * 0 - scaler_usage updated successfully
+ * error - requested scaling cannot be supported or other error condition
+ */
+static int skl_update_scaler_plane(struct intel_crtc_state *crtc_state,
+ struct intel_plane_state *plane_state)
+{
+
+ struct intel_crtc *intel_crtc = to_intel_crtc(crtc_state->base.crtc);
+ struct intel_plane *intel_plane =
+ to_intel_plane(plane_state->base.plane);
+ struct drm_framebuffer *fb = plane_state->base.fb;
+ int ret;
+
+ bool force_detach = !fb || !plane_state->visible;
+
+ DRM_DEBUG_KMS("Updating scaler for [PLANE:%d] scaler_user index %u.%u\n",
+ intel_plane->base.base.id, intel_crtc->pipe,
+ drm_plane_index(&intel_plane->base));
+
+ ret = skl_update_scaler(crtc_state, force_detach,
+ drm_plane_index(&intel_plane->base),
+ &plane_state->scaler_id,
+ plane_state->base.rotation,
+ drm_rect_width(&plane_state->src) >> 16,
+ drm_rect_height(&plane_state->src) >> 16,
+ drm_rect_width(&plane_state->dst),
+ drm_rect_height(&plane_state->dst));
+
+ if (ret || plane_state->scaler_id < 0)
+ return ret;
+
/* check colorkey */
- if (WARN_ON(intel_plane &&
- intel_plane->ckey.flags != I915_SET_COLORKEY_NONE)) {
- DRM_DEBUG_KMS("PLANE:%d scaling %ux%u->%ux%u not allowed with colorkey",
- intel_plane->base.base.id, src_w, src_h, dst_w, dst_h);
+ if (plane_state->ckey.flags != I915_SET_COLORKEY_NONE) {
+ DRM_DEBUG_KMS("[PLANE:%d] scaling with color key not allowed",
+ intel_plane->base.base.id);
return -EINVAL;
}
/* Check src format */
- if (intel_plane) {
- switch (fb->pixel_format) {
- case DRM_FORMAT_RGB565:
- case DRM_FORMAT_XBGR8888:
- case DRM_FORMAT_XRGB8888:
- case DRM_FORMAT_ABGR8888:
- case DRM_FORMAT_ARGB8888:
- case DRM_FORMAT_XRGB2101010:
- case DRM_FORMAT_XBGR2101010:
- case DRM_FORMAT_YUYV:
- case DRM_FORMAT_YVYU:
- case DRM_FORMAT_UYVY:
- case DRM_FORMAT_VYUY:
- break;
- default:
- DRM_DEBUG_KMS("PLANE:%d FB:%d unsupported scaling format 0x%x\n",
- intel_plane->base.base.id, fb->base.id, fb->pixel_format);
- return -EINVAL;
- }
+ switch (fb->pixel_format) {
+ case DRM_FORMAT_RGB565:
+ case DRM_FORMAT_XBGR8888:
+ case DRM_FORMAT_XRGB8888:
+ case DRM_FORMAT_ABGR8888:
+ case DRM_FORMAT_ARGB8888:
+ case DRM_FORMAT_XRGB2101010:
+ case DRM_FORMAT_XBGR2101010:
+ case DRM_FORMAT_YUYV:
+ case DRM_FORMAT_YVYU:
+ case DRM_FORMAT_UYVY:
+ case DRM_FORMAT_VYUY:
+ break;
+ default:
+ DRM_DEBUG_KMS("[PLANE:%d] FB:%d unsupported scaling format 0x%x\n",
+ intel_plane->base.base.id, fb->base.id, fb->pixel_format);
+ return -EINVAL;
}
- /* mark this plane as a scaler user in crtc_state */
- scaler_state->scaler_users |= (1 << idx);
- DRM_DEBUG_KMS("%s:%d staged scaling request for %ux%u->%ux%u "
- "crtc_state = %p scaler_users = 0x%x\n",
- intel_plane ? "PLANE" : "CRTC",
- intel_plane ? intel_plane->base.base.id : intel_crtc->base.base.id,
- src_w, src_h, dst_w, dst_h, crtc_state, scaler_state->scaler_users);
return 0;
}
-static void skylake_pfit_update(struct intel_crtc *crtc, int enable)
+static void skylake_scaler_disable(struct intel_crtc *crtc)
+{
+ int i;
+
+ for (i = 0; i < crtc->num_scalers; i++)
+ skl_detach_scaler(crtc, i);
+}
+
+static void skylake_pfit_enable(struct intel_crtc *crtc)
{
struct drm_device *dev = crtc->base.dev;
struct drm_i915_private *dev_priv = dev->dev_private;
DRM_DEBUG_KMS("for crtc_state = %p\n", crtc->config);
- /* To update pfit, first update scaler state */
- skl_update_scaler_users(crtc, crtc->config, NULL, NULL, !enable);
- intel_atomic_setup_scalers(crtc->base.dev, crtc, crtc->config);
- skl_detach_scalers(crtc);
- if (!enable)
- return;
-
if (crtc->config->pch_pfit.enabled) {
int id;
}
}
-static void intel_enable_sprite_planes(struct drm_crtc *crtc)
-{
- struct drm_device *dev = crtc->dev;
- enum pipe pipe = to_intel_crtc(crtc)->pipe;
- struct drm_plane *plane;
- struct intel_plane *intel_plane;
-
- drm_for_each_legacy_plane(plane, &dev->mode_config.plane_list) {
- intel_plane = to_intel_plane(plane);
- if (intel_plane->pipe == pipe)
- intel_plane_restore(&intel_plane->base);
- }
-}
-
void hsw_enable_ips(struct intel_crtc *crtc)
{
struct drm_device *dev = crtc->base.dev;
bool reenable_ips = false;
/* The clocks have to be on to load the palette. */
- if (!crtc->state->enable || !intel_crtc->active)
+ if (!crtc->state->active)
return;
if (HAS_GMCH_DISPLAY(dev_priv->dev)) {
*/
hsw_enable_ips(intel_crtc);
- mutex_lock(&dev->struct_mutex);
- intel_fbc_update(dev);
- mutex_unlock(&dev->struct_mutex);
-
/*
* Gen2 reports pipe underruns whenever all planes are disabled.
* So don't enable underrun reporting before at least some planes
* event which is after the vblank start event, so we need to have a
* wait-for-vblank between disabling the plane and the pipe.
*/
- if (HAS_GMCH_DISPLAY(dev))
+ if (HAS_GMCH_DISPLAY(dev)) {
intel_set_memory_cxsr(dev_priv, false);
-
- mutex_lock(&dev->struct_mutex);
- if (dev_priv->fbc.crtc == intel_crtc)
- intel_fbc_disable(dev);
- mutex_unlock(&dev->struct_mutex);
+ dev_priv->wm.vlv.cxsr = false;
+ intel_wait_for_vblank(dev, pipe);
+ }
/*
* FIXME IPS should be fine as long as one plane is
hsw_disable_ips(intel_crtc);
}
-static void intel_crtc_enable_planes(struct drm_crtc *crtc)
+static void intel_post_plane_update(struct intel_crtc *crtc)
{
- struct drm_device *dev = crtc->dev;
- struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
- int pipe = intel_crtc->pipe;
+ struct intel_crtc_atomic_commit *atomic = &crtc->atomic;
+ struct drm_device *dev = crtc->base.dev;
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ struct drm_plane *plane;
- intel_enable_primary_hw_plane(crtc->primary, crtc);
- intel_enable_sprite_planes(crtc);
- intel_crtc_update_cursor(crtc, true);
+ if (atomic->wait_vblank)
+ intel_wait_for_vblank(dev, crtc->pipe);
- intel_post_enable_primary(crtc);
+ intel_frontbuffer_flip(dev, atomic->fb_bits);
- /*
- * FIXME: Once we grow proper nuclear flip support out of this we need
- * to compute the mask of flip planes precisely. For the time being
- * consider this a flip to a NULL plane.
- */
- intel_frontbuffer_flip(dev, INTEL_FRONTBUFFER_ALL_MASK(pipe));
+ if (atomic->disable_cxsr)
+ crtc->wm.cxsr_allowed = true;
+
+ if (crtc->atomic.update_wm_post)
+ intel_update_watermarks(&crtc->base);
+
+ if (atomic->update_fbc)
+ intel_fbc_update(dev_priv);
+
+ if (atomic->post_enable_primary)
+ intel_post_enable_primary(&crtc->base);
+
+ drm_for_each_plane_mask(plane, dev, atomic->update_sprite_watermarks)
+ intel_update_sprite_watermarks(plane, &crtc->base,
+ 0, 0, 0, false, false);
+
+ memset(atomic, 0, sizeof(*atomic));
}
-static void intel_crtc_disable_planes(struct drm_crtc *crtc)
+static void intel_pre_plane_update(struct intel_crtc *crtc)
{
- struct drm_device *dev = crtc->dev;
- struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
- struct intel_plane *intel_plane;
- int pipe = intel_crtc->pipe;
+ struct drm_device *dev = crtc->base.dev;
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ struct intel_crtc_atomic_commit *atomic = &crtc->atomic;
+ struct drm_plane *p;
- if (!intel_crtc->active)
- return;
+ /* Track fb's for any planes being disabled */
+ drm_for_each_plane_mask(p, dev, atomic->disabled_planes) {
+ struct intel_plane *plane = to_intel_plane(p);
+
+ mutex_lock(&dev->struct_mutex);
+ i915_gem_track_fb(intel_fb_obj(plane->base.fb), NULL,
+ plane->frontbuffer_bit);
+ mutex_unlock(&dev->struct_mutex);
+ }
- intel_crtc_wait_for_pending_flips(crtc);
+ if (atomic->wait_for_flips)
+ intel_crtc_wait_for_pending_flips(&crtc->base);
- intel_pre_disable_primary(crtc);
+ if (atomic->disable_fbc)
+ intel_fbc_disable_crtc(crtc);
- intel_crtc_dpms_overlay_disable(intel_crtc);
- for_each_intel_plane(dev, intel_plane) {
- if (intel_plane->pipe == pipe) {
- struct drm_crtc *from = intel_plane->base.crtc;
+ if (crtc->atomic.disable_ips)
+ hsw_disable_ips(crtc);
- intel_plane->disable_plane(&intel_plane->base,
- from ?: crtc, true);
- }
+ if (atomic->pre_disable_primary)
+ intel_pre_disable_primary(&crtc->base);
+
+ if (atomic->disable_cxsr) {
+ crtc->wm.cxsr_allowed = false;
+ intel_set_memory_cxsr(dev_priv, false);
}
+}
+
+static void intel_crtc_disable_planes(struct drm_crtc *crtc, unsigned plane_mask)
+{
+ struct drm_device *dev = crtc->dev;
+ struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+ struct drm_plane *p;
+ int pipe = intel_crtc->pipe;
+
+ intel_crtc_dpms_overlay_disable(intel_crtc);
+
+ drm_for_each_plane_mask(p, dev, plane_mask)
+ to_intel_plane(p)->disable_plane(p, crtc);
/*
* FIXME: Once we grow proper nuclear flip support out of this we need
struct intel_encoder *encoder;
int pipe = intel_crtc->pipe;
- WARN_ON(!crtc->state->enable);
-
- if (intel_crtc->active)
+ if (WARN_ON(intel_crtc->active))
return;
if (intel_crtc->config->has_pch_encoder)
return HAS_IPS(crtc->base.dev) && crtc->pipe == PIPE_A;
}
-/*
- * This implements the workaround described in the "notes" section of the mode
- * set sequence documentation. When going from no pipes or single pipe to
- * multiple pipes, and planes are enabled after the pipe, we need to wait at
- * least 2 vblanks on the first pipe before enabling planes on the second pipe.
- */
-static void haswell_mode_set_planes_workaround(struct intel_crtc *crtc)
-{
- struct drm_device *dev = crtc->base.dev;
- struct intel_crtc *crtc_it, *other_active_crtc = NULL;
-
- /* We want to get the other_active_crtc only if there's only 1 other
- * active crtc. */
- for_each_intel_crtc(dev, crtc_it) {
- if (!crtc_it->active || crtc_it == crtc)
- continue;
-
- if (other_active_crtc)
- return;
-
- other_active_crtc = crtc_it;
- }
- if (!other_active_crtc)
- return;
-
- intel_wait_for_vblank(dev, other_active_crtc->pipe);
- intel_wait_for_vblank(dev, other_active_crtc->pipe);
-}
-
static void haswell_crtc_enable(struct drm_crtc *crtc)
{
struct drm_device *dev = crtc->dev;
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
struct intel_encoder *encoder;
- int pipe = intel_crtc->pipe;
-
- WARN_ON(!crtc->state->enable);
+ int pipe = intel_crtc->pipe, hsw_workaround_pipe;
+ struct intel_crtc_state *pipe_config =
+ to_intel_crtc_state(crtc->state);
- if (intel_crtc->active)
+ if (WARN_ON(intel_crtc->active))
return;
if (intel_crtc_to_shared_dpll(intel_crtc))
intel_ddi_enable_pipe_clock(intel_crtc);
- if (INTEL_INFO(dev)->gen == 9)
- skylake_pfit_update(intel_crtc, 1);
- else if (INTEL_INFO(dev)->gen < 9)
- ironlake_pfit_enable(intel_crtc);
+ if (INTEL_INFO(dev)->gen >= 9)
+ skylake_pfit_enable(intel_crtc);
else
- MISSING_CASE(INTEL_INFO(dev)->gen);
+ ironlake_pfit_enable(intel_crtc);
/*
* On ILK+ LUT must be loaded before the pipe is running but with
/* If we change the relative order between pipe/planes enabling, we need
* to change the workaround. */
- haswell_mode_set_planes_workaround(intel_crtc);
+ hsw_workaround_pipe = pipe_config->hsw_workaround_pipe;
+ if (IS_HASWELL(dev) && hsw_workaround_pipe != INVALID_PIPE) {
+ intel_wait_for_vblank(dev, hsw_workaround_pipe);
+ intel_wait_for_vblank(dev, hsw_workaround_pipe);
+ }
}
static void ironlake_pfit_disable(struct intel_crtc *crtc)
int pipe = intel_crtc->pipe;
u32 reg, temp;
- if (!intel_crtc->active)
- return;
-
for_each_encoder_on_crtc(dev, crtc, encoder)
encoder->disable(encoder);
I915_WRITE(PCH_DPLL_SEL, temp);
}
- /* disable PCH DPLL */
- intel_disable_shared_dpll(intel_crtc);
-
ironlake_fdi_pll_disable(intel_crtc);
}
intel_crtc->active = false;
intel_update_watermarks(crtc);
-
- mutex_lock(&dev->struct_mutex);
- intel_fbc_update(dev);
- mutex_unlock(&dev->struct_mutex);
}
static void haswell_crtc_disable(struct drm_crtc *crtc)
struct intel_encoder *encoder;
enum transcoder cpu_transcoder = intel_crtc->config->cpu_transcoder;
- if (!intel_crtc->active)
- return;
-
for_each_encoder_on_crtc(dev, crtc, encoder) {
intel_opregion_notify_encoder(encoder, false);
encoder->disable(encoder);
intel_ddi_disable_transcoder_func(dev_priv, cpu_transcoder);
- if (INTEL_INFO(dev)->gen == 9)
- skylake_pfit_update(intel_crtc, 0);
- else if (INTEL_INFO(dev)->gen < 9)
- ironlake_pfit_disable(intel_crtc);
+ if (INTEL_INFO(dev)->gen >= 9)
+ skylake_scaler_disable(intel_crtc);
else
- MISSING_CASE(INTEL_INFO(dev)->gen);
+ ironlake_pfit_disable(intel_crtc);
intel_ddi_disable_pipe_clock(intel_crtc);
intel_crtc->active = false;
intel_update_watermarks(crtc);
-
- mutex_lock(&dev->struct_mutex);
- intel_fbc_update(dev);
- mutex_unlock(&dev->struct_mutex);
-
- if (intel_crtc_to_shared_dpll(intel_crtc))
- intel_disable_shared_dpll(intel_crtc);
-}
-
-static void ironlake_crtc_off(struct drm_crtc *crtc)
-{
- struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
- intel_put_shared_dpll(intel_crtc);
}
-
static void i9xx_pfit_enable(struct intel_crtc *crtc)
{
struct drm_device *dev = crtc->base.dev;
return POWER_DOMAIN_PORT_DDI_C_4_LANES;
case PORT_D:
return POWER_DOMAIN_PORT_DDI_D_4_LANES;
+ case PORT_E:
+ return POWER_DOMAIN_PORT_DDI_E_2_LANES;
default:
WARN_ON_ONCE(1);
return POWER_DOMAIN_PORT_OTHER;
unsigned long mask;
enum transcoder transcoder;
+ if (!crtc->state->active)
+ return 0;
+
transcoder = intel_pipe_to_cpu_transcoder(dev->dev_private, pipe);
mask = BIT(POWER_DOMAIN_PIPE(pipe));
return mask;
}
-static void modeset_update_crtc_power_domains(struct drm_atomic_state *state)
+static unsigned long modeset_get_crtc_power_domains(struct drm_crtc *crtc)
{
- struct drm_device *dev = state->dev;
- struct drm_i915_private *dev_priv = dev->dev_private;
- unsigned long pipe_domains[I915_MAX_PIPES] = { 0, };
- struct intel_crtc *crtc;
+ struct drm_i915_private *dev_priv = crtc->dev->dev_private;
+ struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+ enum intel_display_power_domain domain;
+ unsigned long domains, new_domains, old_domains;
- /*
- * First get all needed power domains, then put all unneeded, to avoid
- * any unnecessary toggling of the power wells.
- */
- for_each_intel_crtc(dev, crtc) {
- enum intel_display_power_domain domain;
+ old_domains = intel_crtc->enabled_power_domains;
+ intel_crtc->enabled_power_domains = new_domains = get_crtc_power_domains(crtc);
- if (!crtc->base.state->enable)
- continue;
+ domains = new_domains & ~old_domains;
- pipe_domains[crtc->pipe] = get_crtc_power_domains(&crtc->base);
+ for_each_power_domain(domain, domains)
+ intel_display_power_get(dev_priv, domain);
- for_each_power_domain(domain, pipe_domains[crtc->pipe])
- intel_display_power_get(dev_priv, domain);
- }
+ return old_domains & ~new_domains;
+}
+
+static void modeset_put_power_domains(struct drm_i915_private *dev_priv,
+ unsigned long domains)
+{
+ enum intel_display_power_domain domain;
- if (dev_priv->display.modeset_global_resources)
- dev_priv->display.modeset_global_resources(state);
+ for_each_power_domain(domain, domains)
+ intel_display_power_put(dev_priv, domain);
+}
- for_each_intel_crtc(dev, crtc) {
- enum intel_display_power_domain domain;
+static void modeset_update_crtc_power_domains(struct drm_atomic_state *state)
+{
+ struct drm_device *dev = state->dev;
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ unsigned long put_domains[I915_MAX_PIPES] = {};
+ struct drm_crtc_state *crtc_state;
+ struct drm_crtc *crtc;
+ int i;
+
+ for_each_crtc_in_state(state, crtc, crtc_state, i) {
+ if (needs_modeset(crtc->state))
+ put_domains[to_intel_crtc(crtc)->pipe] =
+ modeset_get_crtc_power_domains(crtc);
+ }
- for_each_power_domain(domain, crtc->enabled_power_domains)
- intel_display_power_put(dev_priv, domain);
+ if (dev_priv->display.modeset_commit_cdclk) {
+ unsigned int cdclk = to_intel_atomic_state(state)->cdclk;
- crtc->enabled_power_domains = pipe_domains[crtc->pipe];
+ if (cdclk != dev_priv->cdclk_freq &&
+ !WARN_ON(!state->allow_modeset))
+ dev_priv->display.modeset_commit_cdclk(state);
}
- intel_display_set_init_power(dev_priv, false);
+ for (i = 0; i < I915_MAX_PIPES; i++)
+ if (put_domains[i])
+ modeset_put_power_domains(dev_priv, put_domains[i]);
}
-void broxton_set_cdclk(struct drm_device *dev, int frequency)
+static int intel_compute_max_dotclk(struct drm_i915_private *dev_priv)
{
- struct drm_i915_private *dev_priv = dev->dev_private;
- uint32_t divider;
- uint32_t ratio;
- uint32_t current_freq;
- int ret;
+ int max_cdclk_freq = dev_priv->max_cdclk_freq;
- /* frequency = 19.2MHz * ratio / 2 / div{1,1.5,2,4} */
+ if (INTEL_INFO(dev_priv)->gen >= 9 ||
+ IS_HASWELL(dev_priv) || IS_BROADWELL(dev_priv))
+ return max_cdclk_freq;
+ else if (IS_CHERRYVIEW(dev_priv))
+ return max_cdclk_freq*95/100;
+ else if (INTEL_INFO(dev_priv)->gen < 4)
+ return 2*max_cdclk_freq*90/100;
+ else
+ return max_cdclk_freq*90/100;
+}
+
+static void intel_update_max_cdclk(struct drm_device *dev)
+{
+ struct drm_i915_private *dev_priv = dev->dev_private;
+
+ if (IS_SKYLAKE(dev)) {
+ u32 limit = I915_READ(SKL_DFSM) & SKL_DFSM_CDCLK_LIMIT_MASK;
+
+ if (limit == SKL_DFSM_CDCLK_LIMIT_675)
+ dev_priv->max_cdclk_freq = 675000;
+ else if (limit == SKL_DFSM_CDCLK_LIMIT_540)
+ dev_priv->max_cdclk_freq = 540000;
+ else if (limit == SKL_DFSM_CDCLK_LIMIT_450)
+ dev_priv->max_cdclk_freq = 450000;
+ else
+ dev_priv->max_cdclk_freq = 337500;
+ } else if (IS_BROADWELL(dev)) {
+ /*
+ * FIXME with extra cooling we can allow
+ * 540 MHz for ULX and 675 Mhz for ULT.
+ * How can we know if extra cooling is
+ * available? PCI ID, VTB, something else?
+ */
+ if (I915_READ(FUSE_STRAP) & HSW_CDCLK_LIMIT)
+ dev_priv->max_cdclk_freq = 450000;
+ else if (IS_BDW_ULX(dev))
+ dev_priv->max_cdclk_freq = 450000;
+ else if (IS_BDW_ULT(dev))
+ dev_priv->max_cdclk_freq = 540000;
+ else
+ dev_priv->max_cdclk_freq = 675000;
+ } else if (IS_CHERRYVIEW(dev)) {
+ dev_priv->max_cdclk_freq = 320000;
+ } else if (IS_VALLEYVIEW(dev)) {
+ dev_priv->max_cdclk_freq = 400000;
+ } else {
+ /* otherwise assume cdclk is fixed */
+ dev_priv->max_cdclk_freq = dev_priv->cdclk_freq;
+ }
+
+ dev_priv->max_dotclk_freq = intel_compute_max_dotclk(dev_priv);
+
+ DRM_DEBUG_DRIVER("Max CD clock rate: %d kHz\n",
+ dev_priv->max_cdclk_freq);
+
+ DRM_DEBUG_DRIVER("Max dotclock rate: %d kHz\n",
+ dev_priv->max_dotclk_freq);
+}
+
+static void intel_update_cdclk(struct drm_device *dev)
+{
+ struct drm_i915_private *dev_priv = dev->dev_private;
+
+ dev_priv->cdclk_freq = dev_priv->display.get_display_clock_speed(dev);
+ DRM_DEBUG_DRIVER("Current CD clock rate: %d kHz\n",
+ dev_priv->cdclk_freq);
+
+ /*
+ * Program the gmbus_freq based on the cdclk frequency.
+ * BSpec erroneously claims we should aim for 4MHz, but
+ * in fact 1MHz is the correct frequency.
+ */
+ if (IS_VALLEYVIEW(dev)) {
+ /*
+ * Program the gmbus_freq based on the cdclk frequency.
+ * BSpec erroneously claims we should aim for 4MHz, but
+ * in fact 1MHz is the correct frequency.
+ */
+ I915_WRITE(GMBUSFREQ_VLV, DIV_ROUND_UP(dev_priv->cdclk_freq, 1000));
+ }
+
+ if (dev_priv->max_cdclk_freq == 0)
+ intel_update_max_cdclk(dev);
+}
+
+static void broxton_set_cdclk(struct drm_device *dev, int frequency)
+{
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ uint32_t divider;
+ uint32_t ratio;
+ uint32_t current_freq;
+ int ret;
+
+ /* frequency = 19.2MHz * ratio / 2 / div{1,1.5,2,4} */
switch (frequency) {
case 144000:
divider = BXT_CDCLK_CD2X_DIV_SEL_4;
return;
}
- dev_priv->cdclk_freq = frequency;
+ intel_update_cdclk(dev);
}
void broxton_init_cdclk(struct drm_device *dev)
static void skl_set_cdclk(struct drm_i915_private *dev_priv, unsigned int freq)
{
+ struct drm_device *dev = dev_priv->dev;
u32 freq_select, pcu_ack;
DRM_DEBUG_DRIVER("Changing CDCLK to %dKHz\n", freq);
mutex_lock(&dev_priv->rps.hw_lock);
sandybridge_pcode_write(dev_priv, SKL_PCODE_CDCLK_CONTROL, pcu_ack);
mutex_unlock(&dev_priv->rps.hw_lock);
+
+ intel_update_cdclk(dev);
}
void skl_uninit_cdclk(struct drm_i915_private *dev_priv)
/* enable PG1 and Misc I/O */
intel_display_power_get(dev_priv, POWER_DOMAIN_PLLS);
- /* DPLL0 already enabed !? */
- if (I915_READ(LCPLL1_CTL) & LCPLL_PLL_ENABLE) {
- DRM_DEBUG_DRIVER("DPLL0 already running\n");
- return;
+ /* DPLL0 not enabled (happens on early BIOS versions) */
+ if (!(I915_READ(LCPLL1_CTL) & LCPLL_PLL_ENABLE)) {
+ /* enable DPLL0 */
+ required_vco = skl_cdclk_get_vco(dev_priv->skl_boot_cdclk);
+ skl_dpll0_enable(dev_priv, required_vco);
}
- /* enable DPLL0 */
- required_vco = skl_cdclk_get_vco(dev_priv->skl_boot_cdclk);
- skl_dpll0_enable(dev_priv, required_vco);
-
/* set CDCLK to the frequency the BIOS chose */
skl_set_cdclk(dev_priv, dev_priv->skl_boot_cdclk);
return vco_freq[hpll_freq] * 1000;
}
-static void vlv_update_cdclk(struct drm_device *dev)
-{
- struct drm_i915_private *dev_priv = dev->dev_private;
-
- dev_priv->cdclk_freq = dev_priv->display.get_display_clock_speed(dev);
- DRM_DEBUG_DRIVER("Current CD clock rate: %d kHz\n",
- dev_priv->cdclk_freq);
-
- /*
- * Program the gmbus_freq based on the cdclk frequency.
- * BSpec erroneously claims we should aim for 4MHz, but
- * in fact 1MHz is the correct frequency.
- */
- I915_WRITE(GMBUSFREQ_VLV, DIV_ROUND_UP(dev_priv->cdclk_freq, 1000));
-}
-
/* Adjust CDclk dividers to allow high res or save power if possible */
static void valleyview_set_cdclk(struct drm_device *dev, int cdclk)
{
mutex_unlock(&dev_priv->sb_lock);
- vlv_update_cdclk(dev);
+ intel_update_cdclk(dev);
}
static void cherryview_set_cdclk(struct drm_device *dev, int cdclk)
}
mutex_unlock(&dev_priv->rps.hw_lock);
- vlv_update_cdclk(dev);
+ intel_update_cdclk(dev);
}
static int valleyview_calc_cdclk(struct drm_i915_private *dev_priv,
int max_pixclk = 0;
for_each_intel_crtc(dev, intel_crtc) {
- if (state)
- crtc_state =
- intel_atomic_get_crtc_state(state, intel_crtc);
- else
- crtc_state = intel_crtc->config;
+ crtc_state = intel_atomic_get_crtc_state(state, intel_crtc);
if (IS_ERR(crtc_state))
return PTR_ERR(crtc_state);
return max_pixclk;
}
-static int valleyview_modeset_global_pipes(struct drm_atomic_state *state)
+static int valleyview_modeset_calc_cdclk(struct drm_atomic_state *state)
{
- struct drm_i915_private *dev_priv = to_i915(state->dev);
- struct drm_crtc *crtc;
- struct drm_crtc_state *crtc_state;
- int max_pixclk = intel_mode_max_pixclk(state->dev, state);
- int cdclk, i;
+ struct drm_device *dev = state->dev;
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ int max_pixclk = intel_mode_max_pixclk(dev, state);
if (max_pixclk < 0)
return max_pixclk;
- if (IS_VALLEYVIEW(dev_priv))
- cdclk = valleyview_calc_cdclk(dev_priv, max_pixclk);
- else
- cdclk = broxton_calc_cdclk(dev_priv, max_pixclk);
+ to_intel_atomic_state(state)->cdclk =
+ valleyview_calc_cdclk(dev_priv, max_pixclk);
- if (cdclk == dev_priv->cdclk_freq)
- return 0;
+ return 0;
+}
- /* add all active pipes to the state */
- for_each_crtc(state->dev, crtc) {
- if (!crtc->state->enable)
- continue;
+static int broxton_modeset_calc_cdclk(struct drm_atomic_state *state)
+{
+ struct drm_device *dev = state->dev;
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ int max_pixclk = intel_mode_max_pixclk(dev, state);
- crtc_state = drm_atomic_get_crtc_state(state, crtc);
- if (IS_ERR(crtc_state))
- return PTR_ERR(crtc_state);
- }
+ if (max_pixclk < 0)
+ return max_pixclk;
- /* disable/enable all currently active pipes while we change cdclk */
- for_each_crtc_in_state(state, crtc, crtc_state, i)
- if (crtc_state->enable)
- crtc_state->mode_changed = true;
+ to_intel_atomic_state(state)->cdclk =
+ broxton_calc_cdclk(dev_priv, max_pixclk);
return 0;
}
if (DIV_ROUND_CLOSEST(dev_priv->cdclk_freq, 1000) >= dev_priv->rps.cz_freq) {
/* CHV suggested value is 31 or 63 */
if (IS_CHERRYVIEW(dev_priv))
- credits = PFI_CREDIT_31;
+ credits = PFI_CREDIT_63;
else
credits = PFI_CREDIT(15);
} else {
WARN_ON(I915_READ(GCI_CONTROL) & PFI_CREDIT_RESEND);
}
-static void valleyview_modeset_global_resources(struct drm_atomic_state *old_state)
+static void valleyview_modeset_commit_cdclk(struct drm_atomic_state *old_state)
{
struct drm_device *dev = old_state->dev;
+ unsigned int req_cdclk = to_intel_atomic_state(old_state)->cdclk;
struct drm_i915_private *dev_priv = dev->dev_private;
- int max_pixclk = intel_mode_max_pixclk(dev, NULL);
- int req_cdclk;
-
- /* The path in intel_mode_max_pixclk() with a NULL atomic state should
- * never fail. */
- if (WARN_ON(max_pixclk < 0))
- return;
-
- req_cdclk = valleyview_calc_cdclk(dev_priv, max_pixclk);
- if (req_cdclk != dev_priv->cdclk_freq) {
- /*
- * FIXME: We can end up here with all power domains off, yet
- * with a CDCLK frequency other than the minimum. To account
- * for this take the PIPE-A power domain, which covers the HW
- * blocks needed for the following programming. This can be
- * removed once it's guaranteed that we get here either with
- * the minimum CDCLK set, or the required power domains
- * enabled.
- */
- intel_display_power_get(dev_priv, POWER_DOMAIN_PIPE_A);
+ /*
+ * FIXME: We can end up here with all power domains off, yet
+ * with a CDCLK frequency other than the minimum. To account
+ * for this take the PIPE-A power domain, which covers the HW
+ * blocks needed for the following programming. This can be
+ * removed once it's guaranteed that we get here either with
+ * the minimum CDCLK set, or the required power domains
+ * enabled.
+ */
+ intel_display_power_get(dev_priv, POWER_DOMAIN_PIPE_A);
- if (IS_CHERRYVIEW(dev))
- cherryview_set_cdclk(dev, req_cdclk);
- else
- valleyview_set_cdclk(dev, req_cdclk);
+ if (IS_CHERRYVIEW(dev))
+ cherryview_set_cdclk(dev, req_cdclk);
+ else
+ valleyview_set_cdclk(dev, req_cdclk);
- vlv_program_pfi_credits(dev_priv);
+ vlv_program_pfi_credits(dev_priv);
- intel_display_power_put(dev_priv, POWER_DOMAIN_PIPE_A);
- }
+ intel_display_power_put(dev_priv, POWER_DOMAIN_PIPE_A);
}
static void valleyview_crtc_enable(struct drm_crtc *crtc)
int pipe = intel_crtc->pipe;
bool is_dsi;
- WARN_ON(!crtc->state->enable);
-
- if (intel_crtc->active)
+ if (WARN_ON(intel_crtc->active))
return;
is_dsi = intel_pipe_has_type(intel_crtc, INTEL_OUTPUT_DSI);
- if (!is_dsi) {
- if (IS_CHERRYVIEW(dev))
- chv_prepare_pll(intel_crtc, intel_crtc->config);
- else
- vlv_prepare_pll(intel_crtc, intel_crtc->config);
- }
-
if (intel_crtc->config->has_dp_encoder)
intel_dp_set_m_n(intel_crtc, M1_N1);
encoder->pre_pll_enable(encoder);
if (!is_dsi) {
- if (IS_CHERRYVIEW(dev))
+ if (IS_CHERRYVIEW(dev)) {
+ chv_prepare_pll(intel_crtc, intel_crtc->config);
chv_enable_pll(intel_crtc, intel_crtc->config);
- else
+ } else {
+ vlv_prepare_pll(intel_crtc, intel_crtc->config);
vlv_enable_pll(intel_crtc, intel_crtc->config);
+ }
}
for_each_encoder_on_crtc(dev, crtc, encoder)
intel_crtc_load_lut(crtc);
- intel_update_watermarks(crtc);
intel_enable_pipe(intel_crtc);
assert_vblank_disabled(crtc);
struct intel_encoder *encoder;
int pipe = intel_crtc->pipe;
- WARN_ON(!crtc->state->enable);
-
- if (intel_crtc->active)
+ if (WARN_ON(intel_crtc->active))
return;
i9xx_set_pll_dividers(intel_crtc);
struct intel_encoder *encoder;
int pipe = intel_crtc->pipe;
- if (!intel_crtc->active)
- return;
-
/*
* On gen2 planes are double buffered but the pipe isn't, so we must
* wait for planes to fully turn off before disabling the pipe.
i9xx_disable_pll(intel_crtc);
}
+ for_each_encoder_on_crtc(dev, crtc, encoder)
+ if (encoder->post_pll_disable)
+ encoder->post_pll_disable(encoder);
+
if (!IS_GEN2(dev))
intel_set_cpu_fifo_underrun_reporting(dev_priv, pipe, false);
intel_crtc->active = false;
intel_update_watermarks(crtc);
-
- mutex_lock(&dev->struct_mutex);
- intel_fbc_update(dev);
- mutex_unlock(&dev->struct_mutex);
-}
-
-static void i9xx_crtc_off(struct drm_crtc *crtc)
-{
}
-/* Master function to enable/disable CRTC and corresponding power wells */
-void intel_crtc_control(struct drm_crtc *crtc, bool enable)
+static void intel_crtc_disable_noatomic(struct drm_crtc *crtc)
{
- struct drm_device *dev = crtc->dev;
- struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+ struct drm_i915_private *dev_priv = to_i915(crtc->dev);
enum intel_display_power_domain domain;
unsigned long domains;
- if (enable) {
- if (!intel_crtc->active) {
- domains = get_crtc_power_domains(crtc);
- for_each_power_domain(domain, domains)
- intel_display_power_get(dev_priv, domain);
- intel_crtc->enabled_power_domains = domains;
-
- dev_priv->display.crtc_enable(crtc);
- intel_crtc_enable_planes(crtc);
- }
- } else {
- if (intel_crtc->active) {
- intel_crtc_disable_planes(crtc);
- dev_priv->display.crtc_disable(crtc);
+ if (!intel_crtc->active)
+ return;
- domains = intel_crtc->enabled_power_domains;
- for_each_power_domain(domain, domains)
- intel_display_power_put(dev_priv, domain);
- intel_crtc->enabled_power_domains = 0;
- }
+ if (to_intel_plane_state(crtc->primary->state)->visible) {
+ intel_crtc_wait_for_pending_flips(crtc);
+ intel_pre_disable_primary(crtc);
}
+
+ intel_crtc_disable_planes(crtc, crtc->state->plane_mask);
+ dev_priv->display.crtc_disable(crtc);
+ intel_disable_shared_dpll(intel_crtc);
+
+ domains = intel_crtc->enabled_power_domains;
+ for_each_power_domain(domain, domains)
+ intel_display_power_put(dev_priv, domain);
+ intel_crtc->enabled_power_domains = 0;
}
-/**
- * Sets the power management mode of the pipe and plane.
+/*
+ * turn all crtc's off, but do not adjust state
+ * This has to be paired with a call to intel_modeset_setup_hw_state.
*/
-void intel_crtc_update_dpms(struct drm_crtc *crtc)
+int intel_display_suspend(struct drm_device *dev)
{
- struct drm_device *dev = crtc->dev;
- struct intel_encoder *intel_encoder;
- bool enable = false;
-
- for_each_encoder_on_crtc(dev, crtc, intel_encoder)
- enable |= intel_encoder->connectors_active;
+ struct drm_mode_config *config = &dev->mode_config;
+ struct drm_modeset_acquire_ctx *ctx = config->acquire_ctx;
+ struct drm_atomic_state *state;
+ struct drm_crtc *crtc;
+ unsigned crtc_mask = 0;
+ int ret = 0;
- intel_crtc_control(crtc, enable);
+ if (WARN_ON(!ctx))
+ return 0;
- crtc->state->active = enable;
-}
+ lockdep_assert_held(&ctx->ww_ctx);
+ state = drm_atomic_state_alloc(dev);
+ if (WARN_ON(!state))
+ return -ENOMEM;
-static void intel_crtc_disable(struct drm_crtc *crtc)
-{
- struct drm_device *dev = crtc->dev;
- struct drm_connector *connector;
- struct drm_i915_private *dev_priv = dev->dev_private;
+ state->acquire_ctx = ctx;
+ state->allow_modeset = true;
- intel_crtc_disable_planes(crtc);
- dev_priv->display.crtc_disable(crtc);
- dev_priv->display.off(crtc);
+ for_each_crtc(dev, crtc) {
+ struct drm_crtc_state *crtc_state =
+ drm_atomic_get_crtc_state(state, crtc);
- drm_plane_helper_disable(crtc->primary);
+ ret = PTR_ERR_OR_ZERO(crtc_state);
+ if (ret)
+ goto free;
- /* Update computed state. */
- list_for_each_entry(connector, &dev->mode_config.connector_list, head) {
- if (!connector->encoder || !connector->encoder->crtc)
+ if (!crtc_state->active)
continue;
- if (connector->encoder->crtc != crtc)
- continue;
+ crtc_state->active = false;
+ crtc_mask |= 1 << drm_crtc_index(crtc);
+ }
+
+ if (crtc_mask) {
+ ret = drm_atomic_commit(state);
- connector->dpms = DRM_MODE_DPMS_OFF;
- to_intel_encoder(connector->encoder)->connectors_active = false;
+ if (!ret) {
+ for_each_crtc(dev, crtc)
+ if (crtc_mask & (1 << drm_crtc_index(crtc)))
+ crtc->state->active = true;
+
+ return ret;
+ }
}
+
+free:
+ if (ret)
+ DRM_ERROR("Suspending crtc's failed with %i\n", ret);
+ drm_atomic_state_free(state);
+ return ret;
}
void intel_encoder_destroy(struct drm_encoder *encoder)
kfree(intel_encoder);
}
-/* Simple dpms helper for encoders with just one connector, no cloning and only
- * one kind of off state. It clamps all !ON modes to fully OFF and changes the
- * state of the entire output pipe. */
-static void intel_encoder_dpms(struct intel_encoder *encoder, int mode)
-{
- if (mode == DRM_MODE_DPMS_ON) {
- encoder->connectors_active = true;
-
- intel_crtc_update_dpms(encoder->base.crtc);
- } else {
- encoder->connectors_active = false;
-
- intel_crtc_update_dpms(encoder->base.crtc);
- }
-}
-
/* Cross check the actual hw state with our own modeset state tracking (and it's
* internal consistency). */
static void intel_connector_check_state(struct intel_connector *connector)
{
+ struct drm_crtc *crtc = connector->base.state->crtc;
+
+ DRM_DEBUG_KMS("[CONNECTOR:%d:%s]\n",
+ connector->base.base.id,
+ connector->base.name);
+
if (connector->get_hw_state(connector)) {
struct intel_encoder *encoder = connector->encoder;
- struct drm_crtc *crtc;
- bool encoder_enabled;
- enum pipe pipe;
+ struct drm_connector_state *conn_state = connector->base.state;
- DRM_DEBUG_KMS("[CONNECTOR:%d:%s]\n",
- connector->base.base.id,
- connector->base.name);
+ I915_STATE_WARN(!crtc,
+ "connector enabled without attached crtc\n");
- /* there is no real hw state for MST connectors */
- if (connector->mst_port)
+ if (!crtc)
return;
- I915_STATE_WARN(connector->base.dpms == DRM_MODE_DPMS_OFF,
- "wrong connector dpms state\n");
- I915_STATE_WARN(connector->base.encoder != &encoder->base,
- "active connector not linked to encoder\n");
+ I915_STATE_WARN(!crtc->state->active,
+ "connector is active, but attached crtc isn't\n");
- if (encoder) {
- I915_STATE_WARN(!encoder->connectors_active,
- "encoder->connectors_active not set\n");
-
- encoder_enabled = encoder->get_hw_state(encoder, &pipe);
- I915_STATE_WARN(!encoder_enabled, "encoder not enabled\n");
- if (I915_STATE_WARN_ON(!encoder->base.crtc))
- return;
+ if (!encoder || encoder->type == INTEL_OUTPUT_DP_MST)
+ return;
- crtc = encoder->base.crtc;
+ I915_STATE_WARN(conn_state->best_encoder != &encoder->base,
+ "atomic encoder doesn't match attached encoder\n");
- I915_STATE_WARN(!crtc->state->enable,
- "crtc not enabled\n");
- I915_STATE_WARN(!to_intel_crtc(crtc)->active, "crtc not active\n");
- I915_STATE_WARN(pipe != to_intel_crtc(crtc)->pipe,
- "encoder active on the wrong pipe\n");
- }
+ I915_STATE_WARN(conn_state->crtc != encoder->base.crtc,
+ "attached encoder crtc differs from connector crtc\n");
+ } else {
+ I915_STATE_WARN(crtc && crtc->state->active,
+ "attached crtc is active, but connector isn't\n");
+ I915_STATE_WARN(!crtc && connector->base.state->best_encoder,
+ "best encoder set without crtc!\n");
}
}
return connector;
}
-/* Even simpler default implementation, if there's really no special case to
- * consider. */
-void intel_connector_dpms(struct drm_connector *connector, int mode)
-{
- /* All the simple cases only support two dpms states. */
- if (mode != DRM_MODE_DPMS_ON)
- mode = DRM_MODE_DPMS_OFF;
-
- if (mode == connector->dpms)
- return;
-
- connector->dpms = mode;
-
- /* Only need to change hw state when actually enabled */
- if (connector->encoder)
- intel_encoder_dpms(to_intel_encoder(connector->encoder), mode);
-
- intel_modeset_check_state(connector->dev);
-}
-
/* Simple connector->get_hw_state implementation for encoders that support only
* one connector and no cloning and hence the encoder state determines the state
* of the connector. */
return ret;
}
+static bool pipe_config_supports_ips(struct drm_i915_private *dev_priv,
+ struct intel_crtc_state *pipe_config)
+{
+ if (pipe_config->pipe_bpp > 24)
+ return false;
+
+ /* HSW can handle pixel rate up to cdclk? */
+ if (IS_HASWELL(dev_priv->dev))
+ return true;
+
+ /*
+ * We compare against max which means we must take
+ * the increased cdclk requirement into account when
+ * calculating the new cdclk.
+ *
+ * Should measure whether using a lower cdclk w/o IPS
+ */
+ return ilk_pipe_pixel_rate(pipe_config) <=
+ dev_priv->max_cdclk_freq * 95 / 100;
+}
+
static void hsw_compute_ips_config(struct intel_crtc *crtc,
struct intel_crtc_state *pipe_config)
{
+ struct drm_device *dev = crtc->base.dev;
+ struct drm_i915_private *dev_priv = dev->dev_private;
+
pipe_config->ips_enabled = i915.enable_ips &&
- hsw_crtc_supports_ips(crtc) &&
- pipe_config->pipe_bpp <= 24;
+ hsw_crtc_supports_ips(crtc) &&
+ pipe_config_supports_ips(dev_priv, pipe_config);
}
static int intel_crtc_compute_config(struct intel_crtc *crtc,
struct drm_device *dev = crtc->base.dev;
struct drm_i915_private *dev_priv = dev->dev_private;
struct drm_display_mode *adjusted_mode = &pipe_config->base.adjusted_mode;
- int ret;
/* FIXME should check pixel clock limits on all platforms */
if (INTEL_INFO(dev)->gen < 4) {
- int clock_limit =
- dev_priv->display.get_display_clock_speed(dev);
+ int clock_limit = dev_priv->max_cdclk_freq;
/*
* Enable pixel doubling when the dot clock
if (pipe_config->has_pch_encoder)
return ironlake_fdi_compute_config(crtc, pipe_config);
- /* FIXME: remove below call once atomic mode set is place and all crtc
- * related checks called from atomic_crtc_check function */
- ret = 0;
- DRM_DEBUG_KMS("intel_crtc = %p drm_state (pipe_config->base.state) = %p\n",
- crtc, pipe_config->base.state);
- ret = intel_atomic_setup_scalers(dev, crtc, pipe_config);
-
- return ret;
+ return 0;
}
static int skylake_get_display_clock_speed(struct drm_device *dev)
uint32_t cdctl = I915_READ(CDCLK_CTL);
uint32_t linkrate;
- if (!(lcpll1 & LCPLL_PLL_ENABLE)) {
- WARN(1, "LCPLL1 not enabled\n");
+ if (!(lcpll1 & LCPLL_PLL_ENABLE))
return 24000; /* 24MHz is the cd freq with NSSC ref */
- }
if ((cdctl & CDCLK_FREQ_SEL_MASK) == CDCLK_FREQ_540)
return 540000;
return 24000;
}
+static int broxton_get_display_clock_speed(struct drm_device *dev)
+{
+ struct drm_i915_private *dev_priv = to_i915(dev);
+ uint32_t cdctl = I915_READ(CDCLK_CTL);
+ uint32_t pll_ratio = I915_READ(BXT_DE_PLL_CTL) & BXT_DE_PLL_RATIO_MASK;
+ uint32_t pll_enab = I915_READ(BXT_DE_PLL_ENABLE);
+ int cdclk;
+
+ if (!(pll_enab & BXT_DE_PLL_PLL_ENABLE))
+ return 19200;
+
+ cdclk = 19200 * pll_ratio / 2;
+
+ switch (cdctl & BXT_CDCLK_CD2X_DIV_SEL_MASK) {
+ case BXT_CDCLK_CD2X_DIV_SEL_1:
+ return cdclk; /* 576MHz or 624MHz */
+ case BXT_CDCLK_CD2X_DIV_SEL_1_5:
+ return cdclk * 2 / 3; /* 384MHz */
+ case BXT_CDCLK_CD2X_DIV_SEL_2:
+ return cdclk / 2; /* 288MHz */
+ case BXT_CDCLK_CD2X_DIV_SEL_4:
+ return cdclk / 4; /* 144MHz */
+ }
+
+ /* error case, do as if DE PLL isn't enabled */
+ return 19200;
+}
+
static int broadwell_get_display_clock_speed(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
return 266667;
}
-static int i855_get_display_clock_speed(struct drm_device *dev)
+static int i85x_get_display_clock_speed(struct drm_device *dev)
{
u16 hpllcc = 0;
+
+ /*
+ * 852GM/852GMV only supports 133 MHz and the HPLLCC
+ * encoding is different :(
+ * FIXME is this the right way to detect 852GM/852GMV?
+ */
+ if (dev->pdev->revision == 0x1)
+ return 133333;
+
+ pci_bus_read_config_word(dev->pdev->bus,
+ PCI_DEVFN(0, 3), HPLLCC, &hpllcc);
+
/* Assume that the hardware is in the high speed state. This
* should be the default.
*/
switch (hpllcc & GC_CLOCK_CONTROL_MASK) {
case GC_CLOCK_133_200:
+ case GC_CLOCK_133_200_2:
case GC_CLOCK_100_200:
return 200000;
case GC_CLOCK_166_250:
return 250000;
case GC_CLOCK_100_133:
return 133333;
+ case GC_CLOCK_133_266:
+ case GC_CLOCK_133_266_2:
+ case GC_CLOCK_166_266:
+ return 266667;
}
/* Shouldn't happen */
return 133333;
}
-static void
-intel_reduce_m_n_ratio(uint32_t *num, uint32_t *den)
+static unsigned int intel_hpll_vco(struct drm_device *dev)
{
- while (*num > DATA_LINK_M_N_MASK ||
- *den > DATA_LINK_M_N_MASK) {
- *num >>= 1;
- *den >>= 1;
- }
-}
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ static const unsigned int blb_vco[8] = {
+ [0] = 3200000,
+ [1] = 4000000,
+ [2] = 5333333,
+ [3] = 4800000,
+ [4] = 6400000,
+ };
+ static const unsigned int pnv_vco[8] = {
+ [0] = 3200000,
+ [1] = 4000000,
+ [2] = 5333333,
+ [3] = 4800000,
+ [4] = 2666667,
+ };
+ static const unsigned int cl_vco[8] = {
+ [0] = 3200000,
+ [1] = 4000000,
+ [2] = 5333333,
+ [3] = 6400000,
+ [4] = 3333333,
+ [5] = 3566667,
+ [6] = 4266667,
+ };
+ static const unsigned int elk_vco[8] = {
+ [0] = 3200000,
+ [1] = 4000000,
+ [2] = 5333333,
+ [3] = 4800000,
+ };
+ static const unsigned int ctg_vco[8] = {
+ [0] = 3200000,
+ [1] = 4000000,
+ [2] = 5333333,
+ [3] = 6400000,
+ [4] = 2666667,
+ [5] = 4266667,
+ };
+ const unsigned int *vco_table;
+ unsigned int vco;
+ uint8_t tmp = 0;
+
+ /* FIXME other chipsets? */
+ if (IS_GM45(dev))
+ vco_table = ctg_vco;
+ else if (IS_G4X(dev))
+ vco_table = elk_vco;
+ else if (IS_CRESTLINE(dev))
+ vco_table = cl_vco;
+ else if (IS_PINEVIEW(dev))
+ vco_table = pnv_vco;
+ else if (IS_G33(dev))
+ vco_table = blb_vco;
+ else
+ return 0;
+
+ tmp = I915_READ(IS_MOBILE(dev) ? HPLLVCO_MOBILE : HPLLVCO);
+
+ vco = vco_table[tmp & 0x7];
+ if (vco == 0)
+ DRM_ERROR("Bad HPLL VCO (HPLLVCO=0x%02x)\n", tmp);
+ else
+ DRM_DEBUG_KMS("HPLL VCO %u kHz\n", vco);
+
+ return vco;
+}
+
+static int gm45_get_display_clock_speed(struct drm_device *dev)
+{
+ unsigned int cdclk_sel, vco = intel_hpll_vco(dev);
+ uint16_t tmp = 0;
+
+ pci_read_config_word(dev->pdev, GCFGC, &tmp);
+
+ cdclk_sel = (tmp >> 12) & 0x1;
+
+ switch (vco) {
+ case 2666667:
+ case 4000000:
+ case 5333333:
+ return cdclk_sel ? 333333 : 222222;
+ case 3200000:
+ return cdclk_sel ? 320000 : 228571;
+ default:
+ DRM_ERROR("Unable to determine CDCLK. HPLL VCO=%u, CFGC=0x%04x\n", vco, tmp);
+ return 222222;
+ }
+}
+
+static int i965gm_get_display_clock_speed(struct drm_device *dev)
+{
+ static const uint8_t div_3200[] = { 16, 10, 8 };
+ static const uint8_t div_4000[] = { 20, 12, 10 };
+ static const uint8_t div_5333[] = { 24, 16, 14 };
+ const uint8_t *div_table;
+ unsigned int cdclk_sel, vco = intel_hpll_vco(dev);
+ uint16_t tmp = 0;
+
+ pci_read_config_word(dev->pdev, GCFGC, &tmp);
+
+ cdclk_sel = ((tmp >> 8) & 0x1f) - 1;
+
+ if (cdclk_sel >= ARRAY_SIZE(div_3200))
+ goto fail;
+
+ switch (vco) {
+ case 3200000:
+ div_table = div_3200;
+ break;
+ case 4000000:
+ div_table = div_4000;
+ break;
+ case 5333333:
+ div_table = div_5333;
+ break;
+ default:
+ goto fail;
+ }
+
+ return DIV_ROUND_CLOSEST(vco, div_table[cdclk_sel]);
+
+fail:
+ DRM_ERROR("Unable to determine CDCLK. HPLL VCO=%u kHz, CFGC=0x%04x\n", vco, tmp);
+ return 200000;
+}
+
+static int g33_get_display_clock_speed(struct drm_device *dev)
+{
+ static const uint8_t div_3200[] = { 12, 10, 8, 7, 5, 16 };
+ static const uint8_t div_4000[] = { 14, 12, 10, 8, 6, 20 };
+ static const uint8_t div_4800[] = { 20, 14, 12, 10, 8, 24 };
+ static const uint8_t div_5333[] = { 20, 16, 12, 12, 8, 28 };
+ const uint8_t *div_table;
+ unsigned int cdclk_sel, vco = intel_hpll_vco(dev);
+ uint16_t tmp = 0;
+
+ pci_read_config_word(dev->pdev, GCFGC, &tmp);
+
+ cdclk_sel = (tmp >> 4) & 0x7;
+
+ if (cdclk_sel >= ARRAY_SIZE(div_3200))
+ goto fail;
+
+ switch (vco) {
+ case 3200000:
+ div_table = div_3200;
+ break;
+ case 4000000:
+ div_table = div_4000;
+ break;
+ case 4800000:
+ div_table = div_4800;
+ break;
+ case 5333333:
+ div_table = div_5333;
+ break;
+ default:
+ goto fail;
+ }
+
+ return DIV_ROUND_CLOSEST(vco, div_table[cdclk_sel]);
+
+fail:
+ DRM_ERROR("Unable to determine CDCLK. HPLL VCO=%u kHz, CFGC=0x%08x\n", vco, tmp);
+ return 190476;
+}
+
+static void
+intel_reduce_m_n_ratio(uint32_t *num, uint32_t *den)
+{
+ while (*num > DATA_LINK_M_N_MASK ||
+ *den > DATA_LINK_M_N_MASK) {
+ *num >>= 1;
+ *den >>= 1;
+ }
+}
static void compute_m_n(unsigned int m, unsigned int n,
uint32_t *ret_m, uint32_t *ret_n)
intel_cpu_transcoder_set_m_n(crtc, dp_m_n, dp_m2_n2);
}
-static void vlv_update_pll(struct intel_crtc *crtc,
- struct intel_crtc_state *pipe_config)
+static void vlv_compute_dpll(struct intel_crtc *crtc,
+ struct intel_crtc_state *pipe_config)
{
u32 dpll, dpll_md;
* clock for pipe B, since VGA hotplug / manual detection depends
* on it.
*/
- dpll = DPLL_EXT_BUFFER_ENABLE_VLV | DPLL_REFA_CLK_ENABLE_VLV |
- DPLL_VGA_MODE_DIS | DPLL_INTEGRATED_CLOCK_VLV;
+ dpll = DPLL_EXT_BUFFER_ENABLE_VLV | DPLL_REF_CLK_ENABLE_VLV |
+ DPLL_VGA_MODE_DIS | DPLL_INTEGRATED_REF_CLK_VLV;
/* We should never disable this, set it here for state tracking */
if (crtc->pipe == PIPE_B)
dpll |= DPLL_INTEGRATED_CRI_CLK_VLV;
mutex_unlock(&dev_priv->sb_lock);
}
-static void chv_update_pll(struct intel_crtc *crtc,
- struct intel_crtc_state *pipe_config)
+static void chv_compute_dpll(struct intel_crtc *crtc,
+ struct intel_crtc_state *pipe_config)
{
- pipe_config->dpll_hw_state.dpll = DPLL_SSC_REF_CLOCK_CHV |
- DPLL_REFA_CLK_ENABLE_VLV | DPLL_VGA_MODE_DIS |
+ pipe_config->dpll_hw_state.dpll = DPLL_SSC_REF_CLK_CHV |
+ DPLL_REF_CLK_ENABLE_VLV | DPLL_VGA_MODE_DIS |
DPLL_VCO_ENABLE;
if (crtc->pipe != PIPE_A)
pipe_config->dpll_hw_state.dpll |= DPLL_INTEGRATED_CRI_CLK_VLV;
1 << DPIO_CHV_N_DIV_SHIFT);
/* M2 fraction division */
- if (bestm2_frac)
- vlv_dpio_write(dev_priv, pipe, CHV_PLL_DW2(port), bestm2_frac);
+ vlv_dpio_write(dev_priv, pipe, CHV_PLL_DW2(port), bestm2_frac);
/* M2 fraction division enable */
dpio_val = vlv_dpio_read(dev_priv, pipe, CHV_PLL_DW3(port));
};
if (IS_CHERRYVIEW(dev)) {
- chv_update_pll(crtc, &pipe_config);
+ chv_compute_dpll(crtc, &pipe_config);
chv_prepare_pll(crtc, &pipe_config);
chv_enable_pll(crtc, &pipe_config);
} else {
- vlv_update_pll(crtc, &pipe_config);
+ vlv_compute_dpll(crtc, &pipe_config);
vlv_prepare_pll(crtc, &pipe_config);
vlv_enable_pll(crtc, &pipe_config);
}
vlv_disable_pll(to_i915(dev), pipe);
}
-static void i9xx_update_pll(struct intel_crtc *crtc,
- struct intel_crtc_state *crtc_state,
- intel_clock_t *reduced_clock,
- int num_connectors)
+static void i9xx_compute_dpll(struct intel_crtc *crtc,
+ struct intel_crtc_state *crtc_state,
+ intel_clock_t *reduced_clock,
+ int num_connectors)
{
struct drm_device *dev = crtc->base.dev;
struct drm_i915_private *dev_priv = dev->dev_private;
}
}
-static void i8xx_update_pll(struct intel_crtc *crtc,
- struct intel_crtc_state *crtc_state,
- intel_clock_t *reduced_clock,
- int num_connectors)
+static void i8xx_compute_dpll(struct intel_crtc *crtc,
+ struct intel_crtc_state *crtc_state,
+ intel_clock_t *reduced_clock,
+ int num_connectors)
{
struct drm_device *dev = crtc->base.dev;
struct drm_i915_private *dev_priv = dev->dev_private;
mode->vsync_end = pipe_config->base.adjusted_mode.crtc_vsync_end;
mode->flags = pipe_config->base.adjusted_mode.flags;
+ mode->type = DRM_MODE_TYPE_DRIVER;
mode->clock = pipe_config->base.adjusted_mode.crtc_clock;
mode->flags |= pipe_config->base.adjusted_mode.flags;
+
+ mode->hsync = drm_mode_hsync(mode);
+ mode->vrefresh = drm_mode_vrefresh(mode);
+ drm_mode_set_name(mode);
}
static void i9xx_set_pipeconf(struct intel_crtc *intel_crtc)
struct drm_device *dev = crtc->base.dev;
struct drm_i915_private *dev_priv = dev->dev_private;
int refclk, num_connectors = 0;
- intel_clock_t clock, reduced_clock;
- bool ok, has_reduced_clock = false;
- bool is_lvds = false, is_dsi = false;
+ intel_clock_t clock;
+ bool ok;
+ bool is_dsi = false;
struct intel_encoder *encoder;
const intel_limit_t *limit;
struct drm_atomic_state *state = crtc_state->base.state;
encoder = to_intel_encoder(connector_state->best_encoder);
switch (encoder->type) {
- case INTEL_OUTPUT_LVDS:
- is_lvds = true;
- break;
case INTEL_OUTPUT_DSI:
is_dsi = true;
break;
return -EINVAL;
}
- if (is_lvds && dev_priv->lvds_downclock_avail) {
- /*
- * Ensure we match the reduced clock's P to the target
- * clock. If the clocks don't match, we can't switch
- * the display clock by using the FP0/FP1. In such case
- * we will disable the LVDS downclock feature.
- */
- has_reduced_clock =
- dev_priv->display.find_dpll(limit, crtc_state,
- dev_priv->lvds_downclock,
- refclk, &clock,
- &reduced_clock);
- }
/* Compat-code for transition, will disappear. */
crtc_state->dpll.n = clock.n;
crtc_state->dpll.m1 = clock.m1;
}
if (IS_GEN2(dev)) {
- i8xx_update_pll(crtc, crtc_state,
- has_reduced_clock ? &reduced_clock : NULL,
- num_connectors);
+ i8xx_compute_dpll(crtc, crtc_state, NULL,
+ num_connectors);
} else if (IS_CHERRYVIEW(dev)) {
- chv_update_pll(crtc, crtc_state);
+ chv_compute_dpll(crtc, crtc_state);
} else if (IS_VALLEYVIEW(dev)) {
- vlv_update_pll(crtc, crtc_state);
+ vlv_compute_dpll(crtc, crtc_state);
} else {
- i9xx_update_pll(crtc, crtc_state,
- has_reduced_clock ? &reduced_clock : NULL,
- num_connectors);
+ i9xx_compute_dpll(crtc, crtc_state, NULL,
+ num_connectors);
}
return 0;
clock.p1 = (mdiv >> DPIO_P1_SHIFT) & 7;
clock.p2 = (mdiv >> DPIO_P2_SHIFT) & 0x1f;
- vlv_clock(refclk, &clock);
-
- /* clock.dot is the fast clock */
- pipe_config->port_clock = clock.dot / 5;
+ pipe_config->port_clock = vlv_calc_dpll_params(refclk, &clock);
}
static void
clock.p1 = (cmn_dw13 >> DPIO_CHV_P1_DIV_SHIFT) & 0x7;
clock.p2 = (cmn_dw13 >> DPIO_CHV_P2_DIV_SHIFT) & 0x1f;
- chv_clock(refclk, &clock);
-
- /* clock.dot is the fast clock */
- pipe_config->port_clock = clock.dot / 5;
+ pipe_config->port_clock = chv_calc_dpll_params(refclk, &clock);
}
static bool i9xx_get_pipe_config(struct intel_crtc *crtc,
else
i9xx_crtc_clock_get(crtc, pipe_config);
+ /*
+ * Normally the dotclock is filled in by the encoder .get_config()
+ * but in case the pipe is enabled w/o any ports we need a sane
+ * default.
+ */
+ pipe_config->base.adjusted_mode.crtc_clock =
+ pipe_config->port_clock / pipe_config->pixel_multiplier;
+
return true;
}
if (WARN(with_fdi && !with_spread, "FDI requires downspread\n"))
with_spread = true;
- if (WARN(dev_priv->pch_id == INTEL_PCH_LPT_LP_DEVICE_ID_TYPE &&
- with_fdi, "LP PCH doesn't have FDI\n"))
+ if (WARN(HAS_PCH_LPT_LP(dev) && with_fdi, "LP PCH doesn't have FDI\n"))
with_fdi = false;
mutex_lock(&dev_priv->sb_lock);
}
}
- reg = (dev_priv->pch_id == INTEL_PCH_LPT_LP_DEVICE_ID_TYPE) ?
- SBI_GEN0 : SBI_DBUFF0;
+ reg = HAS_PCH_LPT_LP(dev) ? SBI_GEN0 : SBI_DBUFF0;
tmp = intel_sbi_read(dev_priv, reg, SBI_ICLK);
tmp |= SBI_GEN0_CFG_BUFFENABLE_DISABLE;
intel_sbi_write(dev_priv, reg, tmp, SBI_ICLK);
mutex_lock(&dev_priv->sb_lock);
- reg = (dev_priv->pch_id == INTEL_PCH_LPT_LP_DEVICE_ID_TYPE) ?
- SBI_GEN0 : SBI_DBUFF0;
+ reg = HAS_PCH_LPT_LP(dev) ? SBI_GEN0 : SBI_DBUFF0;
tmp = intel_sbi_read(dev_priv, reg, SBI_ICLK);
tmp &= ~SBI_GEN0_CFG_BUFFENABLE_DISABLE;
intel_sbi_write(dev_priv, reg, tmp, SBI_ICLK);
struct drm_i915_private *dev_priv = dev->dev_private;
int refclk;
const intel_limit_t *limit;
- bool ret, is_lvds = false;
-
- is_lvds = intel_pipe_will_have_type(crtc_state, INTEL_OUTPUT_LVDS);
+ bool ret;
refclk = ironlake_get_refclk(crtc_state);
if (!ret)
return false;
- if (is_lvds && dev_priv->lvds_downclock_avail) {
- /*
- * Ensure we match the reduced clock's P to the target clock.
- * If the clocks don't match, we can't switch the display clock
- * by using the FP0/FP1. In such case we will disable the LVDS
- * downclock feature.
- */
- *has_reduced_clock =
- dev_priv->display.find_dpll(limit, crtc_state,
- dev_priv->lvds_downclock,
- refclk, clock,
- reduced_clock);
- }
-
return true;
}
}
intel_uncore_forcewake_put(dev_priv, FORCEWAKE_ALL);
+ intel_update_cdclk(dev_priv->dev);
}
/*
DRM_DEBUG_KMS("Enabling package C8+\n");
- if (dev_priv->pch_id == INTEL_PCH_LPT_LP_DEVICE_ID_TYPE) {
+ if (HAS_PCH_LPT_LP(dev)) {
val = I915_READ(SOUTH_DSPCLK_GATE_D);
val &= ~PCH_LP_PARTITION_LEVEL_DISABLE;
I915_WRITE(SOUTH_DSPCLK_GATE_D, val);
hsw_restore_lcpll(dev_priv);
lpt_init_pch_refclk(dev);
- if (dev_priv->pch_id == INTEL_PCH_LPT_LP_DEVICE_ID_TYPE) {
+ if (HAS_PCH_LPT_LP(dev)) {
val = I915_READ(SOUTH_DSPCLK_GATE_D);
val |= PCH_LP_PARTITION_LEVEL_DISABLE;
I915_WRITE(SOUTH_DSPCLK_GATE_D, val);
intel_prepare_ddi(dev);
}
-static void broxton_modeset_global_resources(struct drm_atomic_state *old_state)
+static void broxton_modeset_commit_cdclk(struct drm_atomic_state *old_state)
{
struct drm_device *dev = old_state->dev;
+ unsigned int req_cdclk = to_intel_atomic_state(old_state)->cdclk;
+
+ broxton_set_cdclk(dev, req_cdclk);
+}
+
+/* compute the max rate for new configuration */
+static int ilk_max_pixel_rate(struct drm_atomic_state *state)
+{
+ struct intel_crtc *intel_crtc;
+ struct intel_crtc_state *crtc_state;
+ int max_pixel_rate = 0;
+
+ for_each_intel_crtc(state->dev, intel_crtc) {
+ int pixel_rate;
+
+ crtc_state = intel_atomic_get_crtc_state(state, intel_crtc);
+ if (IS_ERR(crtc_state))
+ return PTR_ERR(crtc_state);
+
+ if (!crtc_state->base.enable)
+ continue;
+
+ pixel_rate = ilk_pipe_pixel_rate(crtc_state);
+
+ /* pixel rate mustn't exceed 95% of cdclk with IPS on BDW */
+ if (IS_BROADWELL(state->dev) && crtc_state->ips_enabled)
+ pixel_rate = DIV_ROUND_UP(pixel_rate * 100, 95);
+
+ max_pixel_rate = max(max_pixel_rate, pixel_rate);
+ }
+
+ return max_pixel_rate;
+}
+
+static void broadwell_set_cdclk(struct drm_device *dev, int cdclk)
+{
struct drm_i915_private *dev_priv = dev->dev_private;
- int max_pixclk = intel_mode_max_pixclk(dev, NULL);
- int req_cdclk;
+ uint32_t val, data;
+ int ret;
+
+ if (WARN((I915_READ(LCPLL_CTL) &
+ (LCPLL_PLL_DISABLE | LCPLL_PLL_LOCK |
+ LCPLL_CD_CLOCK_DISABLE | LCPLL_ROOT_CD_CLOCK_DISABLE |
+ LCPLL_CD2X_CLOCK_DISABLE | LCPLL_POWER_DOWN_ALLOW |
+ LCPLL_CD_SOURCE_FCLK)) != LCPLL_PLL_LOCK,
+ "trying to change cdclk frequency with cdclk not enabled\n"))
+ return;
+
+ mutex_lock(&dev_priv->rps.hw_lock);
+ ret = sandybridge_pcode_write(dev_priv,
+ BDW_PCODE_DISPLAY_FREQ_CHANGE_REQ, 0x0);
+ mutex_unlock(&dev_priv->rps.hw_lock);
+ if (ret) {
+ DRM_ERROR("failed to inform pcode about cdclk change\n");
+ return;
+ }
+
+ val = I915_READ(LCPLL_CTL);
+ val |= LCPLL_CD_SOURCE_FCLK;
+ I915_WRITE(LCPLL_CTL, val);
+
+ if (wait_for_atomic_us(I915_READ(LCPLL_CTL) &
+ LCPLL_CD_SOURCE_FCLK_DONE, 1))
+ DRM_ERROR("Switching to FCLK failed\n");
+
+ val = I915_READ(LCPLL_CTL);
+ val &= ~LCPLL_CLK_FREQ_MASK;
- /* see the comment in valleyview_modeset_global_resources */
- if (WARN_ON(max_pixclk < 0))
+ switch (cdclk) {
+ case 450000:
+ val |= LCPLL_CLK_FREQ_450;
+ data = 0;
+ break;
+ case 540000:
+ val |= LCPLL_CLK_FREQ_54O_BDW;
+ data = 1;
+ break;
+ case 337500:
+ val |= LCPLL_CLK_FREQ_337_5_BDW;
+ data = 2;
+ break;
+ case 675000:
+ val |= LCPLL_CLK_FREQ_675_BDW;
+ data = 3;
+ break;
+ default:
+ WARN(1, "invalid cdclk frequency\n");
return;
+ }
+
+ I915_WRITE(LCPLL_CTL, val);
+
+ val = I915_READ(LCPLL_CTL);
+ val &= ~LCPLL_CD_SOURCE_FCLK;
+ I915_WRITE(LCPLL_CTL, val);
+
+ if (wait_for_atomic_us((I915_READ(LCPLL_CTL) &
+ LCPLL_CD_SOURCE_FCLK_DONE) == 0, 1))
+ DRM_ERROR("Switching back to LCPLL failed\n");
+
+ mutex_lock(&dev_priv->rps.hw_lock);
+ sandybridge_pcode_write(dev_priv, HSW_PCODE_DE_WRITE_FREQ_REQ, data);
+ mutex_unlock(&dev_priv->rps.hw_lock);
+
+ intel_update_cdclk(dev);
+
+ WARN(cdclk != dev_priv->cdclk_freq,
+ "cdclk requested %d kHz but got %d kHz\n",
+ cdclk, dev_priv->cdclk_freq);
+}
+
+static int broadwell_modeset_calc_cdclk(struct drm_atomic_state *state)
+{
+ struct drm_i915_private *dev_priv = to_i915(state->dev);
+ int max_pixclk = ilk_max_pixel_rate(state);
+ int cdclk;
+
+ /*
+ * FIXME should also account for plane ratio
+ * once 64bpp pixel formats are supported.
+ */
+ if (max_pixclk > 540000)
+ cdclk = 675000;
+ else if (max_pixclk > 450000)
+ cdclk = 540000;
+ else if (max_pixclk > 337500)
+ cdclk = 450000;
+ else
+ cdclk = 337500;
+
+ /*
+ * FIXME move the cdclk caclulation to
+ * compute_config() so we can fail gracegully.
+ */
+ if (cdclk > dev_priv->max_cdclk_freq) {
+ DRM_ERROR("requested cdclk (%d kHz) exceeds max (%d kHz)\n",
+ cdclk, dev_priv->max_cdclk_freq);
+ cdclk = dev_priv->max_cdclk_freq;
+ }
+
+ to_intel_atomic_state(state)->cdclk = cdclk;
+
+ return 0;
+}
- req_cdclk = broxton_calc_cdclk(dev_priv, max_pixclk);
+static void broadwell_modeset_commit_cdclk(struct drm_atomic_state *old_state)
+{
+ struct drm_device *dev = old_state->dev;
+ unsigned int req_cdclk = to_intel_atomic_state(old_state)->cdclk;
- if (req_cdclk != dev_priv->cdclk_freq)
- broxton_set_cdclk(dev, req_cdclk);
+ broadwell_set_cdclk(dev, req_cdclk);
}
static int haswell_crtc_compute_clock(struct intel_crtc *crtc,
}
if (intel_display_power_is_enabled(dev_priv, pfit_domain)) {
- if (INTEL_INFO(dev)->gen == 9)
+ if (INTEL_INFO(dev)->gen >= 9)
skylake_get_pfit_config(crtc, pipe_config);
- else if (INTEL_INFO(dev)->gen < 9)
- ironlake_get_pfit_config(crtc, pipe_config);
else
- MISSING_CASE(INTEL_INFO(dev)->gen);
+ ironlake_get_pfit_config(crtc, pipe_config);
}
if (IS_HASWELL(dev))
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
int pipe = intel_crtc->pipe;
- int x = crtc->cursor_x;
- int y = crtc->cursor_y;
+ struct drm_plane_state *cursor_state = crtc->cursor->state;
+ int x = cursor_state->crtc_x;
+ int y = cursor_state->crtc_y;
u32 base = 0, pos = 0;
if (on)
base = 0;
if (x < 0) {
- if (x + intel_crtc->base.cursor->state->crtc_w <= 0)
+ if (x + cursor_state->crtc_w <= 0)
base = 0;
pos |= CURSOR_POS_SIGN << CURSOR_X_SHIFT;
pos |= x << CURSOR_X_SHIFT;
if (y < 0) {
- if (y + intel_crtc->base.cursor->state->crtc_h <= 0)
+ if (y + cursor_state->crtc_h <= 0)
base = 0;
pos |= CURSOR_POS_SIGN << CURSOR_Y_SHIFT;
/* ILK+ do this automagically */
if (HAS_GMCH_DISPLAY(dev) &&
crtc->cursor->state->rotation == BIT(DRM_ROTATE_180)) {
- base += (intel_crtc->base.cursor->state->crtc_h *
- intel_crtc->base.cursor->state->crtc_w - 1) * 4;
+ base += (cursor_state->crtc_h *
+ cursor_state->crtc_w - 1) * 4;
}
if (IS_845G(dev) || IS_I865G(dev))
mode_fits_in_fbdev(struct drm_device *dev,
struct drm_display_mode *mode)
{
-#ifdef CONFIG_DRM_I915_FBDEV
+#ifdef CONFIG_DRM_FBDEV_EMULATION
struct drm_i915_private *dev_priv = dev->dev_private;
struct drm_i915_gem_object *obj;
struct drm_framebuffer *fb;
retry:
ret = drm_modeset_lock(&config->connection_mutex, ctx);
if (ret)
- goto fail_unlock;
+ goto fail;
/*
* Algorithm gets a little messy:
ret = drm_modeset_lock(&crtc->mutex, ctx);
if (ret)
- goto fail_unlock;
+ goto fail;
ret = drm_modeset_lock(&crtc->primary->mutex, ctx);
if (ret)
- goto fail_unlock;
+ goto fail;
old->dpms_mode = connector->dpms;
old->load_detect_temp = false;
continue;
if (possible_crtc->state->enable)
continue;
- /* This can occur when applying the pipe A quirk on resume. */
- if (to_intel_crtc(possible_crtc)->new_enabled)
- continue;
crtc = possible_crtc;
break;
*/
if (!crtc) {
DRM_DEBUG_KMS("no pipe available for load-detect\n");
- goto fail_unlock;
+ goto fail;
}
ret = drm_modeset_lock(&crtc->mutex, ctx);
if (ret)
- goto fail_unlock;
+ goto fail;
ret = drm_modeset_lock(&crtc->primary->mutex, ctx);
if (ret)
- goto fail_unlock;
- intel_encoder->new_crtc = to_intel_crtc(crtc);
- to_intel_connector(connector)->new_encoder = intel_encoder;
+ goto fail;
intel_crtc = to_intel_crtc(crtc);
- intel_crtc->new_enabled = true;
old->dpms_mode = connector->dpms;
old->load_detect_temp = true;
old->release_fb = NULL;
drm_mode_copy(&crtc_state->base.mode, mode);
- if (intel_set_mode(crtc, state, true)) {
+ if (drm_atomic_commit(state)) {
DRM_DEBUG_KMS("failed to set mode on load-detect pipe\n");
if (old->release_fb)
old->release_fb->funcs->destroy(old->release_fb);
intel_wait_for_vblank(dev, intel_crtc->pipe);
return true;
- fail:
- intel_crtc->new_enabled = crtc->state->enable;
-fail_unlock:
+fail:
drm_atomic_state_free(state);
state = NULL;
if (IS_ERR(crtc_state))
goto fail;
- to_intel_connector(connector)->new_encoder = NULL;
- intel_encoder->new_crtc = NULL;
- intel_crtc->new_enabled = false;
-
connector_state->best_encoder = NULL;
connector_state->crtc = NULL;
if (ret)
goto fail;
- ret = intel_set_mode(crtc, state, true);
+ ret = drm_atomic_commit(state);
if (ret)
goto fail;
u32 dpll = pipe_config->dpll_hw_state.dpll;
u32 fp;
intel_clock_t clock;
+ int port_clock;
int refclk = i9xx_pll_refclk(dev, pipe_config);
if ((dpll & DISPLAY_RATE_SELECT_FPA1) == 0)
}
if (IS_PINEVIEW(dev))
- pineview_clock(refclk, &clock);
+ port_clock = pnv_calc_dpll_params(refclk, &clock);
else
- i9xx_clock(refclk, &clock);
+ port_clock = i9xx_calc_dpll_params(refclk, &clock);
} else {
u32 lvds = IS_I830(dev) ? 0 : I915_READ(LVDS);
bool is_lvds = (pipe == 1) && (lvds & LVDS_PORT_EN);
clock.p2 = 2;
}
- i9xx_clock(refclk, &clock);
+ port_clock = i9xx_calc_dpll_params(refclk, &clock);
}
/*
* port_clock to compute adjusted_mode.crtc_clock in the
* encoder's get_config() function.
*/
- pipe_config->port_clock = clock.dot;
+ pipe_config->port_clock = port_clock;
}
int intel_dotclock_calculate(int link_freq,
return mode;
}
-static void intel_decrease_pllclock(struct drm_crtc *crtc)
-{
- struct drm_device *dev = crtc->dev;
- struct drm_i915_private *dev_priv = dev->dev_private;
- struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
-
- if (!HAS_GMCH_DISPLAY(dev))
- return;
-
- if (!dev_priv->lvds_downclock_avail)
- return;
-
- /*
- * Since this is called by a timer, we should never get here in
- * the manual case.
- */
- if (!HAS_PIPE_CXSR(dev) && intel_crtc->lowfreq_avail) {
- int pipe = intel_crtc->pipe;
- int dpll_reg = DPLL(pipe);
- int dpll;
-
- DRM_DEBUG_DRIVER("downclocking LVDS\n");
-
- assert_panel_unlocked(dev_priv, pipe);
-
- dpll = I915_READ(dpll_reg);
- dpll |= DISPLAY_RATE_SELECT_FPA1;
- I915_WRITE(dpll_reg, dpll);
- intel_wait_for_vblank(dev, pipe);
- dpll = I915_READ(dpll_reg);
- if (!(dpll & DISPLAY_RATE_SELECT_FPA1))
- DRM_DEBUG_DRIVER("failed to downclock LVDS!\n");
- }
-
-}
-
void intel_mark_busy(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
void intel_mark_idle(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
- struct drm_crtc *crtc;
if (!dev_priv->mm.busy)
return;
dev_priv->mm.busy = false;
- for_each_crtc(dev, crtc) {
- if (!crtc->primary->fb)
- continue;
-
- intel_decrease_pllclock(crtc);
- }
-
if (INTEL_INFO(dev)->gen >= 6)
gen6_rps_idle(dev->dev_private);
{
struct intel_unpin_work *work =
container_of(__work, struct intel_unpin_work, work);
- struct drm_device *dev = work->crtc->dev;
- enum pipe pipe = to_intel_crtc(work->crtc)->pipe;
+ struct intel_crtc *crtc = to_intel_crtc(work->crtc);
+ struct drm_device *dev = crtc->base.dev;
+ struct drm_plane *primary = crtc->base.primary;
mutex_lock(&dev->struct_mutex);
- intel_unpin_fb_obj(work->old_fb, work->crtc->primary->state);
+ intel_unpin_fb_obj(work->old_fb, primary->state);
drm_gem_object_unreference(&work->pending_flip_obj->base);
- intel_fbc_update(dev);
-
if (work->flip_queued_req)
i915_gem_request_assign(&work->flip_queued_req, NULL);
mutex_unlock(&dev->struct_mutex);
- intel_frontbuffer_flip_complete(dev, INTEL_FRONTBUFFER_PRIMARY(pipe));
+ intel_frontbuffer_flip_complete(dev, to_intel_plane(primary)->frontbuffer_bit);
drm_framebuffer_unreference(work->old_fb);
- BUG_ON(atomic_read(&to_intel_crtc(work->crtc)->unpin_work_count) == 0);
- atomic_dec(&to_intel_crtc(work->crtc)->unpin_work_count);
+ BUG_ON(atomic_read(&crtc->unpin_work_count) == 0);
+ atomic_dec(&crtc->unpin_work_count);
kfree(work);
}
struct drm_crtc *crtc,
struct drm_framebuffer *fb,
struct drm_i915_gem_object *obj,
- struct intel_engine_cs *ring,
+ struct drm_i915_gem_request *req,
uint32_t flags)
{
+ struct intel_engine_cs *ring = req->ring;
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
u32 flip_mask;
int ret;
- ret = intel_ring_begin(ring, 6);
+ ret = intel_ring_begin(req, 6);
if (ret)
return ret;
intel_ring_emit(ring, 0); /* aux display base address, unused */
intel_mark_page_flip_active(intel_crtc);
- __intel_ring_advance(ring);
return 0;
}
struct drm_crtc *crtc,
struct drm_framebuffer *fb,
struct drm_i915_gem_object *obj,
- struct intel_engine_cs *ring,
+ struct drm_i915_gem_request *req,
uint32_t flags)
{
+ struct intel_engine_cs *ring = req->ring;
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
u32 flip_mask;
int ret;
- ret = intel_ring_begin(ring, 6);
+ ret = intel_ring_begin(req, 6);
if (ret)
return ret;
intel_ring_emit(ring, MI_NOOP);
intel_mark_page_flip_active(intel_crtc);
- __intel_ring_advance(ring);
return 0;
}
struct drm_crtc *crtc,
struct drm_framebuffer *fb,
struct drm_i915_gem_object *obj,
- struct intel_engine_cs *ring,
+ struct drm_i915_gem_request *req,
uint32_t flags)
{
+ struct intel_engine_cs *ring = req->ring;
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
uint32_t pf, pipesrc;
int ret;
- ret = intel_ring_begin(ring, 4);
+ ret = intel_ring_begin(req, 4);
if (ret)
return ret;
intel_ring_emit(ring, pf | pipesrc);
intel_mark_page_flip_active(intel_crtc);
- __intel_ring_advance(ring);
return 0;
}
struct drm_crtc *crtc,
struct drm_framebuffer *fb,
struct drm_i915_gem_object *obj,
- struct intel_engine_cs *ring,
+ struct drm_i915_gem_request *req,
uint32_t flags)
{
+ struct intel_engine_cs *ring = req->ring;
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
uint32_t pf, pipesrc;
int ret;
- ret = intel_ring_begin(ring, 4);
+ ret = intel_ring_begin(req, 4);
if (ret)
return ret;
intel_ring_emit(ring, pf | pipesrc);
intel_mark_page_flip_active(intel_crtc);
- __intel_ring_advance(ring);
return 0;
}
struct drm_crtc *crtc,
struct drm_framebuffer *fb,
struct drm_i915_gem_object *obj,
- struct intel_engine_cs *ring,
+ struct drm_i915_gem_request *req,
uint32_t flags)
{
+ struct intel_engine_cs *ring = req->ring;
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
uint32_t plane_bit = 0;
int len, ret;
* then do the cacheline alignment, and finally emit the
* MI_DISPLAY_FLIP.
*/
- ret = intel_ring_cacheline_align(ring);
+ ret = intel_ring_cacheline_align(req);
if (ret)
return ret;
- ret = intel_ring_begin(ring, len);
+ ret = intel_ring_begin(req, len);
if (ret)
return ret;
DERRMR_PIPEB_PRI_FLIP_DONE |
DERRMR_PIPEC_PRI_FLIP_DONE));
if (IS_GEN8(dev))
- intel_ring_emit(ring, MI_STORE_REGISTER_MEM_GEN8(1) |
+ intel_ring_emit(ring, MI_STORE_REGISTER_MEM_GEN8 |
MI_SRM_LRM_GLOBAL_GTT);
else
- intel_ring_emit(ring, MI_STORE_REGISTER_MEM(1) |
+ intel_ring_emit(ring, MI_STORE_REGISTER_MEM |
MI_SRM_LRM_GLOBAL_GTT);
intel_ring_emit(ring, DERRMR);
intel_ring_emit(ring, ring->scratch.gtt_offset + 256);
intel_ring_emit(ring, (MI_NOOP));
intel_mark_page_flip_active(intel_crtc);
- __intel_ring_advance(ring);
return 0;
}
static void intel_do_mmio_flip(struct intel_crtc *intel_crtc)
{
struct drm_device *dev = intel_crtc->base.dev;
- bool atomic_update;
- u32 start_vbl_count;
intel_mark_page_flip_active(intel_crtc);
- atomic_update = intel_pipe_update_start(intel_crtc, &start_vbl_count);
+ intel_pipe_update_start(intel_crtc);
if (INTEL_INFO(dev)->gen >= 9)
skl_do_mmio_flip(intel_crtc);
/* use_mmio_flip() retricts MMIO flips to ilk+ */
ilk_do_mmio_flip(intel_crtc);
- if (atomic_update)
- intel_pipe_update_end(intel_crtc, start_vbl_count);
+ intel_pipe_update_end(intel_crtc);
}
static void intel_mmio_flip_work_func(struct work_struct *work)
struct drm_crtc *crtc,
struct drm_framebuffer *fb,
struct drm_i915_gem_object *obj,
- struct intel_engine_cs *ring,
+ struct drm_i915_gem_request *req,
uint32_t flags)
{
return -ENODEV;
if (atomic_read(&work->pending) >= INTEL_FLIP_COMPLETE)
return true;
+ if (atomic_read(&work->pending) < INTEL_FLIP_PENDING)
+ return false;
+
if (!work->enable_stall_check)
return false;
struct intel_unpin_work *work;
struct intel_engine_cs *ring;
bool mmio_flip;
+ struct drm_i915_gem_request *request = NULL;
int ret;
/*
*/
ret = intel_pin_and_fence_fb_obj(crtc->primary, fb,
crtc->primary->state,
- mmio_flip ? i915_gem_request_get_ring(obj->last_write_req) : ring);
+ mmio_flip ? i915_gem_request_get_ring(obj->last_write_req) : ring, &request);
if (ret)
goto cleanup_pending;
i915_gem_request_assign(&work->flip_queued_req,
obj->last_write_req);
} else {
- if (obj->last_write_req) {
- ret = i915_gem_check_olr(obj->last_write_req);
+ if (!request) {
+ ret = i915_gem_request_alloc(ring, ring->default_context, &request);
if (ret)
goto cleanup_unpin;
}
- ret = dev_priv->display.queue_flip(dev, crtc, fb, obj, ring,
+ ret = dev_priv->display.queue_flip(dev, crtc, fb, obj, request,
page_flip_flags);
if (ret)
goto cleanup_unpin;
- i915_gem_request_assign(&work->flip_queued_req,
- intel_ring_get_request(ring));
+ i915_gem_request_assign(&work->flip_queued_req, request);
}
+ if (request)
+ i915_add_request_no_flush(request);
+
work->flip_queued_vblank = drm_crtc_vblank_count(crtc);
work->enable_stall_check = true;
i915_gem_track_fb(intel_fb_obj(work->old_fb), obj,
- INTEL_FRONTBUFFER_PRIMARY(pipe));
-
- intel_fbc_disable(dev);
- intel_frontbuffer_flip_prepare(dev, INTEL_FRONTBUFFER_PRIMARY(pipe));
+ to_intel_plane(primary)->frontbuffer_bit);
mutex_unlock(&dev->struct_mutex);
+ intel_fbc_disable_crtc(intel_crtc);
+ intel_frontbuffer_flip_prepare(dev,
+ to_intel_plane(primary)->frontbuffer_bit);
+
trace_i915_flip_request(intel_crtc->plane, obj);
return 0;
cleanup_unpin:
intel_unpin_fb_obj(fb, crtc->primary->state);
cleanup_pending:
+ if (request)
+ i915_gem_request_cancel(request);
atomic_dec(&intel_crtc->unpin_work_count);
mutex_unlock(&dev->struct_mutex);
cleanup:
kfree(work);
if (ret == -EIO) {
+ struct drm_atomic_state *state;
+ struct drm_plane_state *plane_state;
+
out_hang:
- ret = intel_plane_restore(primary);
+ state = drm_atomic_state_alloc(dev);
+ if (!state)
+ return -ENOMEM;
+ state->acquire_ctx = drm_modeset_legacy_acquire_ctx(crtc);
+
+retry:
+ plane_state = drm_atomic_get_plane_state(state, primary);
+ ret = PTR_ERR_OR_ZERO(plane_state);
+ if (!ret) {
+ drm_atomic_set_fb_for_plane(plane_state, fb);
+
+ ret = drm_atomic_set_crtc_for_plane(plane_state, crtc);
+ if (!ret)
+ ret = drm_atomic_commit(state);
+ }
+
+ if (ret == -EDEADLK) {
+ drm_modeset_backoff(state->acquire_ctx);
+ drm_atomic_state_clear(state);
+ goto retry;
+ }
+
+ if (ret)
+ drm_atomic_state_free(state);
+
if (ret == 0 && event) {
spin_lock_irq(&dev->event_lock);
drm_send_vblank_event(dev, pipe, event);
return ret;
}
-static const struct drm_crtc_helper_funcs intel_helper_funcs = {
- .mode_set_base_atomic = intel_pipe_set_base_atomic,
- .load_lut = intel_crtc_load_lut,
- .atomic_begin = intel_begin_crtc_commit,
- .atomic_flush = intel_finish_crtc_commit,
-};
/**
- * intel_modeset_update_staged_output_state
+ * intel_wm_need_update - Check whether watermarks need updating
+ * @plane: drm plane
+ * @state: new plane state
+ *
+ * Check current plane state versus the new one to determine whether
+ * watermarks need to be recalculated.
*
- * Updates the staged output configuration state, e.g. after we've read out the
- * current hw state.
+ * Returns true or false.
*/
-static void intel_modeset_update_staged_output_state(struct drm_device *dev)
+static bool intel_wm_need_update(struct drm_plane *plane,
+ struct drm_plane_state *state)
{
- struct intel_crtc *crtc;
- struct intel_encoder *encoder;
- struct intel_connector *connector;
-
- for_each_intel_connector(dev, connector) {
- connector->new_encoder =
- to_intel_encoder(connector->base.encoder);
- }
+ /* Update watermarks on tiling changes. */
+ if (!plane->state->fb || !state->fb ||
+ plane->state->fb->modifier[0] != state->fb->modifier[0] ||
+ plane->state->rotation != state->rotation)
+ return true;
- for_each_intel_encoder(dev, encoder) {
- encoder->new_crtc =
- to_intel_crtc(encoder->base.crtc);
- }
+ if (plane->state->crtc_w != state->crtc_w)
+ return true;
- for_each_intel_crtc(dev, crtc) {
- crtc->new_enabled = crtc->base.state->enable;
- }
+ return false;
}
-/* Transitional helper to copy current connector/encoder state to
- * connector->state. This is needed so that code that is partially
- * converted to atomic does the right thing.
- */
-static void intel_modeset_update_connector_atomic_state(struct drm_device *dev)
+int intel_plane_atomic_calc_changes(struct drm_crtc_state *crtc_state,
+ struct drm_plane_state *plane_state)
{
- struct intel_connector *connector;
+ struct drm_crtc *crtc = crtc_state->crtc;
+ struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+ struct drm_plane *plane = plane_state->plane;
+ struct drm_device *dev = crtc->dev;
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ struct intel_plane_state *old_plane_state =
+ to_intel_plane_state(plane->state);
+ int idx = intel_crtc->base.base.id, ret;
+ int i = drm_plane_index(plane);
+ bool mode_changed = needs_modeset(crtc_state);
+ bool was_crtc_enabled = crtc->state->active;
+ bool is_crtc_enabled = crtc_state->active;
+
+ bool turn_off, turn_on, visible, was_visible;
+ struct drm_framebuffer *fb = plane_state->fb;
+
+ if (crtc_state && INTEL_INFO(dev)->gen >= 9 &&
+ plane->type != DRM_PLANE_TYPE_CURSOR) {
+ ret = skl_update_scaler_plane(
+ to_intel_crtc_state(crtc_state),
+ to_intel_plane_state(plane_state));
+ if (ret)
+ return ret;
+ }
- for_each_intel_connector(dev, connector) {
- if (connector->base.encoder) {
- connector->base.state->best_encoder =
- connector->base.encoder;
- connector->base.state->crtc =
- connector->base.encoder->crtc;
- } else {
- connector->base.state->best_encoder = NULL;
- connector->base.state->crtc = NULL;
+ /*
+ * Disabling a plane is always okay; we just need to update
+ * fb tracking in a special way since cleanup_fb() won't
+ * get called by the plane helpers.
+ */
+ if (old_plane_state->base.fb && !fb)
+ intel_crtc->atomic.disabled_planes |= 1 << i;
+
+ was_visible = old_plane_state->visible;
+ visible = to_intel_plane_state(plane_state)->visible;
+
+ if (!was_crtc_enabled && WARN_ON(was_visible))
+ was_visible = false;
+
+ if (!is_crtc_enabled && WARN_ON(visible))
+ visible = false;
+
+ if (!was_visible && !visible)
+ return 0;
+
+ turn_off = was_visible && (!visible || mode_changed);
+ turn_on = visible && (!was_visible || mode_changed);
+
+ DRM_DEBUG_ATOMIC("[CRTC:%i] has [PLANE:%i] with fb %i\n", idx,
+ plane->base.id, fb ? fb->base.id : -1);
+
+ DRM_DEBUG_ATOMIC("[PLANE:%i] visible %i -> %i, off %i, on %i, ms %i\n",
+ plane->base.id, was_visible, visible,
+ turn_off, turn_on, mode_changed);
+
+ if (turn_on) {
+ intel_crtc->atomic.update_wm_pre = true;
+ /* must disable cxsr around plane enable/disable */
+ if (plane->type != DRM_PLANE_TYPE_CURSOR) {
+ intel_crtc->atomic.disable_cxsr = true;
+ /* to potentially re-enable cxsr */
+ intel_crtc->atomic.wait_vblank = true;
+ intel_crtc->atomic.update_wm_post = true;
+ }
+ } else if (turn_off) {
+ intel_crtc->atomic.update_wm_post = true;
+ /* must disable cxsr around plane enable/disable */
+ if (plane->type != DRM_PLANE_TYPE_CURSOR) {
+ if (is_crtc_enabled)
+ intel_crtc->atomic.wait_vblank = true;
+ intel_crtc->atomic.disable_cxsr = true;
+ }
+ } else if (intel_wm_need_update(plane, plane_state)) {
+ intel_crtc->atomic.update_wm_pre = true;
+ }
+
+ if (visible || was_visible)
+ intel_crtc->atomic.fb_bits |=
+ to_intel_plane(plane)->frontbuffer_bit;
+
+ switch (plane->type) {
+ case DRM_PLANE_TYPE_PRIMARY:
+ intel_crtc->atomic.wait_for_flips = true;
+ intel_crtc->atomic.pre_disable_primary = turn_off;
+ intel_crtc->atomic.post_enable_primary = turn_on;
+
+ if (turn_off) {
+ /*
+ * FIXME: Actually if we will still have any other
+ * plane enabled on the pipe we could let IPS enabled
+ * still, but for now lets consider that when we make
+ * primary invisible by setting DSPCNTR to 0 on
+ * update_primary_plane function IPS needs to be
+ * disable.
+ */
+ intel_crtc->atomic.disable_ips = true;
+
+ intel_crtc->atomic.disable_fbc = true;
+ }
+
+ /*
+ * FBC does not work on some platforms for rotated
+ * planes, so disable it when rotation is not 0 and
+ * update it when rotation is set back to 0.
+ *
+ * FIXME: This is redundant with the fbc update done in
+ * the primary plane enable function except that that
+ * one is done too late. We eventually need to unify
+ * this.
+ */
+
+ if (visible &&
+ INTEL_INFO(dev)->gen <= 4 && !IS_G4X(dev) &&
+ dev_priv->fbc.crtc == intel_crtc &&
+ plane_state->rotation != BIT(DRM_ROTATE_0))
+ intel_crtc->atomic.disable_fbc = true;
+
+ /*
+ * BDW signals flip done immediately if the plane
+ * is disabled, even if the plane enable is already
+ * armed to occur at the next vblank :(
+ */
+ if (turn_on && IS_BROADWELL(dev))
+ intel_crtc->atomic.wait_vblank = true;
+
+ intel_crtc->atomic.update_fbc |= visible || mode_changed;
+ break;
+ case DRM_PLANE_TYPE_CURSOR:
+ break;
+ case DRM_PLANE_TYPE_OVERLAY:
+ if (turn_off && !mode_changed) {
+ intel_crtc->atomic.wait_vblank = true;
+ intel_crtc->atomic.update_sprite_watermarks |=
+ 1 << i;
}
}
+ return 0;
+}
+
+static bool encoders_cloneable(const struct intel_encoder *a,
+ const struct intel_encoder *b)
+{
+ /* masks could be asymmetric, so check both ways */
+ return a == b || (a->cloneable & (1 << b->type) &&
+ b->cloneable & (1 << a->type));
+}
+
+static bool check_single_encoder_cloning(struct drm_atomic_state *state,
+ struct intel_crtc *crtc,
+ struct intel_encoder *encoder)
+{
+ struct intel_encoder *source_encoder;
+ struct drm_connector *connector;
+ struct drm_connector_state *connector_state;
+ int i;
+
+ for_each_connector_in_state(state, connector, connector_state, i) {
+ if (connector_state->crtc != &crtc->base)
+ continue;
+
+ source_encoder =
+ to_intel_encoder(connector_state->best_encoder);
+ if (!encoders_cloneable(encoder, source_encoder))
+ return false;
+ }
+
+ return true;
}
-/* Fixup legacy state after an atomic state swap.
- */
-static void intel_modeset_fixup_state(struct drm_atomic_state *state)
+static bool check_encoder_cloning(struct drm_atomic_state *state,
+ struct intel_crtc *crtc)
{
- struct intel_crtc *crtc;
struct intel_encoder *encoder;
- struct intel_connector *connector;
+ struct drm_connector *connector;
+ struct drm_connector_state *connector_state;
+ int i;
+
+ for_each_connector_in_state(state, connector, connector_state, i) {
+ if (connector_state->crtc != &crtc->base)
+ continue;
+
+ encoder = to_intel_encoder(connector_state->best_encoder);
+ if (!check_single_encoder_cloning(state, crtc, encoder))
+ return false;
+ }
+
+ return true;
+}
+
+static int intel_crtc_atomic_check(struct drm_crtc *crtc,
+ struct drm_crtc_state *crtc_state)
+{
+ struct drm_device *dev = crtc->dev;
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+ struct intel_crtc_state *pipe_config =
+ to_intel_crtc_state(crtc_state);
+ struct drm_atomic_state *state = crtc_state->state;
+ int ret;
+ bool mode_changed = needs_modeset(crtc_state);
- for_each_intel_connector(state->dev, connector) {
- connector->base.encoder = connector->base.state->best_encoder;
- if (connector->base.encoder)
- connector->base.encoder->crtc =
- connector->base.state->crtc;
+ if (mode_changed && !check_encoder_cloning(state, intel_crtc)) {
+ DRM_DEBUG_KMS("rejecting invalid cloning configuration\n");
+ return -EINVAL;
}
- /* Update crtc of disabled encoders */
- for_each_intel_encoder(state->dev, encoder) {
- int num_connectors = 0;
+ if (mode_changed && !crtc_state->active)
+ intel_crtc->atomic.update_wm_post = true;
- for_each_intel_connector(state->dev, connector)
- if (connector->base.encoder == &encoder->base)
- num_connectors++;
+ if (mode_changed && crtc_state->enable &&
+ dev_priv->display.crtc_compute_clock &&
+ !WARN_ON(pipe_config->shared_dpll != DPLL_ID_PRIVATE)) {
+ ret = dev_priv->display.crtc_compute_clock(intel_crtc,
+ pipe_config);
+ if (ret)
+ return ret;
+ }
- if (num_connectors == 0)
- encoder->base.crtc = NULL;
+ ret = 0;
+ if (INTEL_INFO(dev)->gen >= 9) {
+ if (mode_changed)
+ ret = skl_update_scaler_crtc(pipe_config);
+
+ if (!ret)
+ ret = intel_atomic_setup_scalers(dev, intel_crtc,
+ pipe_config);
}
- for_each_intel_crtc(state->dev, crtc) {
- crtc->base.enabled = crtc->base.state->enable;
- crtc->config = to_intel_crtc_state(crtc->base.state);
+ return ret;
+}
+
+static const struct drm_crtc_helper_funcs intel_helper_funcs = {
+ .mode_set_base_atomic = intel_pipe_set_base_atomic,
+ .load_lut = intel_crtc_load_lut,
+ .atomic_begin = intel_begin_crtc_commit,
+ .atomic_flush = intel_finish_crtc_commit,
+ .atomic_check = intel_crtc_atomic_check,
+};
+
+static void intel_modeset_update_connector_atomic_state(struct drm_device *dev)
+{
+ struct intel_connector *connector;
+
+ for_each_intel_connector(dev, connector) {
+ if (connector->base.encoder) {
+ connector->base.state->best_encoder =
+ connector->base.encoder;
+ connector->base.state->crtc =
+ connector->base.encoder->crtc;
+ } else {
+ connector->base.state->best_encoder = NULL;
+ connector->base.state->crtc = NULL;
+ }
}
}
pipe_config->fdi_m_n.gmch_m, pipe_config->fdi_m_n.gmch_n,
pipe_config->fdi_m_n.link_m, pipe_config->fdi_m_n.link_n,
pipe_config->fdi_m_n.tu);
- DRM_DEBUG_KMS("dp: %i, gmch_m: %u, gmch_n: %u, link_m: %u, link_n: %u, tu: %u\n",
+ DRM_DEBUG_KMS("dp: %i, lanes: %i, gmch_m: %u, gmch_n: %u, link_m: %u, link_n: %u, tu: %u\n",
pipe_config->has_dp_encoder,
+ pipe_config->lane_count,
pipe_config->dp_m_n.gmch_m, pipe_config->dp_m_n.gmch_n,
pipe_config->dp_m_n.link_m, pipe_config->dp_m_n.link_n,
pipe_config->dp_m_n.tu);
- DRM_DEBUG_KMS("dp: %i, gmch_m2: %u, gmch_n2: %u, link_m2: %u, link_n2: %u, tu2: %u\n",
+ DRM_DEBUG_KMS("dp: %i, lanes: %i, gmch_m2: %u, gmch_n2: %u, link_m2: %u, link_n2: %u, tu2: %u\n",
pipe_config->has_dp_encoder,
+ pipe_config->lane_count,
pipe_config->dp_m2_n2.gmch_m,
pipe_config->dp_m2_n2.gmch_n,
pipe_config->dp_m2_n2.link_m,
DRM_DEBUG_KMS("double wide: %i\n", pipe_config->double_wide);
if (IS_BROXTON(dev)) {
- DRM_DEBUG_KMS("ddi_pll_sel: %u; dpll_hw_state: ebb0: 0x%x, "
+ DRM_DEBUG_KMS("ddi_pll_sel: %u; dpll_hw_state: ebb0: 0x%x, ebb4: 0x%x,"
"pll0: 0x%x, pll1: 0x%x, pll2: 0x%x, pll3: 0x%x, "
- "pll6: 0x%x, pll8: 0x%x, pcsdw12: 0x%x\n",
+ "pll6: 0x%x, pll8: 0x%x, pll9: 0x%x, pll10: 0x%x, pcsdw12: 0x%x\n",
pipe_config->ddi_pll_sel,
pipe_config->dpll_hw_state.ebb0,
+ pipe_config->dpll_hw_state.ebb4,
pipe_config->dpll_hw_state.pll0,
pipe_config->dpll_hw_state.pll1,
pipe_config->dpll_hw_state.pll2,
pipe_config->dpll_hw_state.pll3,
pipe_config->dpll_hw_state.pll6,
pipe_config->dpll_hw_state.pll8,
+ pipe_config->dpll_hw_state.pll9,
+ pipe_config->dpll_hw_state.pll10,
pipe_config->dpll_hw_state.pcsdw12);
} else if (IS_SKYLAKE(dev)) {
DRM_DEBUG_KMS("ddi_pll_sel: %u; dpll_hw_state: "
}
}
-static bool encoders_cloneable(const struct intel_encoder *a,
- const struct intel_encoder *b)
-{
- /* masks could be asymmetric, so check both ways */
- return a == b || (a->cloneable & (1 << b->type) &&
- b->cloneable & (1 << a->type));
-}
-
-static bool check_single_encoder_cloning(struct drm_atomic_state *state,
- struct intel_crtc *crtc,
- struct intel_encoder *encoder)
-{
- struct intel_encoder *source_encoder;
- struct drm_connector *connector;
- struct drm_connector_state *connector_state;
- int i;
-
- for_each_connector_in_state(state, connector, connector_state, i) {
- if (connector_state->crtc != &crtc->base)
- continue;
-
- source_encoder =
- to_intel_encoder(connector_state->best_encoder);
- if (!encoders_cloneable(encoder, source_encoder))
- return false;
- }
-
- return true;
-}
-
-static bool check_encoder_cloning(struct drm_atomic_state *state,
- struct intel_crtc *crtc)
-{
- struct intel_encoder *encoder;
- struct drm_connector *connector;
- struct drm_connector_state *connector_state;
- int i;
-
- for_each_connector_in_state(state, connector, connector_state, i) {
- if (connector_state->crtc != &crtc->base)
- continue;
-
- encoder = to_intel_encoder(connector_state->best_encoder);
- if (!check_single_encoder_cloning(state, crtc, encoder))
- return false;
- }
-
- return true;
-}
-
static bool check_digital_port_conflicts(struct drm_atomic_state *state)
{
struct drm_device *dev = state->dev;
struct intel_dpll_hw_state dpll_hw_state;
enum intel_dpll_id shared_dpll;
uint32_t ddi_pll_sel;
+ bool force_thru;
/* FIXME: before the switch to atomic started, a new pipe_config was
* kzalloc'd. Code that depends on any field being zero should be
shared_dpll = crtc_state->shared_dpll;
dpll_hw_state = crtc_state->dpll_hw_state;
ddi_pll_sel = crtc_state->ddi_pll_sel;
+ force_thru = crtc_state->pch_pfit.force_thru;
memset(crtc_state, 0, sizeof *crtc_state);
crtc_state->shared_dpll = shared_dpll;
crtc_state->dpll_hw_state = dpll_hw_state;
crtc_state->ddi_pll_sel = ddi_pll_sel;
+ crtc_state->pch_pfit.force_thru = force_thru;
}
static int
intel_modeset_pipe_config(struct drm_crtc *crtc,
- struct drm_atomic_state *state,
struct intel_crtc_state *pipe_config)
{
+ struct drm_atomic_state *state = pipe_config->base.state;
struct intel_encoder *encoder;
struct drm_connector *connector;
struct drm_connector_state *connector_state;
int i;
bool retry = true;
- if (!check_encoder_cloning(state, to_intel_crtc(crtc))) {
- DRM_DEBUG_KMS("rejecting invalid cloning configuration\n");
- return -EINVAL;
- }
-
- if (!check_digital_port_conflicts(state)) {
- DRM_DEBUG_KMS("rejecting conflicting digital port configuration\n");
- return -EINVAL;
- }
-
clear_intel_crtc_state(pipe_config);
pipe_config->cpu_transcoder =
(DRM_MODE_FLAG_PVSYNC | DRM_MODE_FLAG_NVSYNC)))
pipe_config->base.adjusted_mode.flags |= DRM_MODE_FLAG_NVSYNC;
- /* Compute a starting value for pipe_config->pipe_bpp taking the source
- * plane pixel format and any sink constraints into account. Returns the
- * source plane bpp so that dithering can be selected on mismatches
- * after encoders and crtc also have had their say. */
base_bpp = compute_baseline_pipe_bpp(to_intel_crtc(crtc),
pipe_config);
if (base_bpp < 0)
/* Dithering seems to not pass-through bits correctly when it should, so
* only enable it on 6bpc panels. */
pipe_config->dither = pipe_config->pipe_bpp == 6*3;
- DRM_DEBUG_KMS("plane bpp: %i, pipe bpp: %i, dithering: %i\n",
+ DRM_DEBUG_KMS("hw max bpp: %i, pipe bpp: %i, dithering: %i\n",
base_bpp, pipe_config->pipe_bpp, pipe_config->dither);
- return 0;
fail:
return ret;
}
-static bool intel_crtc_in_use(struct drm_crtc *crtc)
-{
- struct drm_encoder *encoder;
- struct drm_device *dev = crtc->dev;
-
- list_for_each_entry(encoder, &dev->mode_config.encoder_list, head)
- if (encoder->crtc == crtc)
- return true;
-
- return false;
-}
-
-static bool
-needs_modeset(struct drm_crtc_state *state)
-{
- return state->mode_changed || state->active_changed;
-}
-
static void
-intel_modeset_update_state(struct drm_atomic_state *state)
+intel_modeset_update_crtc_state(struct drm_atomic_state *state)
{
- struct drm_device *dev = state->dev;
- struct drm_i915_private *dev_priv = dev->dev_private;
- struct intel_encoder *intel_encoder;
struct drm_crtc *crtc;
struct drm_crtc_state *crtc_state;
- struct drm_connector *connector;
int i;
- intel_shared_dpll_commit(dev_priv);
+ /* Double check state. */
+ for_each_crtc_in_state(state, crtc, crtc_state, i) {
+ to_intel_crtc(crtc)->config = to_intel_crtc_state(crtc->state);
- for_each_intel_encoder(dev, intel_encoder) {
- if (!intel_encoder->base.crtc)
- continue;
+ /* Update hwmode for vblank functions */
+ if (crtc->state->active)
+ crtc->hwmode = crtc->state->adjusted_mode;
+ else
+ crtc->hwmode.crtc_clock = 0;
+ }
+}
- for_each_crtc_in_state(state, crtc, crtc_state, i) {
- if (crtc != intel_encoder->base.crtc)
- continue;
+static bool intel_fuzzy_clock_check(int clock1, int clock2)
+{
+ int diff;
- if (crtc_state->enable && needs_modeset(crtc_state))
- intel_encoder->connectors_active = false;
+ if (clock1 == clock2)
+ return true;
- break;
- }
- }
+ if (!clock1 || !clock2)
+ return false;
- drm_atomic_helper_swap_state(state->dev, state);
- intel_modeset_fixup_state(state);
+ diff = abs(clock1 - clock2);
- /* Double check state. */
- for_each_crtc(dev, crtc) {
- WARN_ON(crtc->state->enable != intel_crtc_in_use(crtc));
- }
+ if (((((diff + clock1 + clock2) * 100)) / (clock1 + clock2)) < 105)
+ return true;
- list_for_each_entry(connector, &dev->mode_config.connector_list, head) {
- if (!connector->encoder || !connector->encoder->crtc)
- continue;
+ return false;
+}
+
+#define for_each_intel_crtc_masked(dev, mask, intel_crtc) \
+ list_for_each_entry((intel_crtc), \
+ &(dev)->mode_config.crtc_list, \
+ base.head) \
+ if (mask & (1 <<(intel_crtc)->pipe))
- for_each_crtc_in_state(state, crtc, crtc_state, i) {
- if (crtc != connector->encoder->crtc)
- continue;
- if (crtc->state->enable && needs_modeset(crtc->state)) {
- struct drm_property *dpms_property =
- dev->mode_config.dpms_property;
+static bool
+intel_compare_m_n(unsigned int m, unsigned int n,
+ unsigned int m2, unsigned int n2,
+ bool exact)
+{
+ if (m == m2 && n == n2)
+ return true;
- connector->dpms = DRM_MODE_DPMS_ON;
- drm_object_property_set_value(&connector->base,
- dpms_property,
- DRM_MODE_DPMS_ON);
+ if (exact || !m || !n || !m2 || !n2)
+ return false;
- intel_encoder = to_intel_encoder(connector->encoder);
- intel_encoder->connectors_active = true;
- }
+ BUILD_BUG_ON(DATA_LINK_M_N_MASK > INT_MAX);
- break;
+ if (m > m2) {
+ while (m > m2) {
+ m2 <<= 1;
+ n2 <<= 1;
+ }
+ } else if (m < m2) {
+ while (m < m2) {
+ m <<= 1;
+ n <<= 1;
}
}
+ return m == m2 && n == n2;
}
-static bool intel_fuzzy_clock_check(int clock1, int clock2)
-{
- int diff;
-
- if (clock1 == clock2)
- return true;
-
- if (!clock1 || !clock2)
- return false;
-
- diff = abs(clock1 - clock2);
+static bool
+intel_compare_link_m_n(const struct intel_link_m_n *m_n,
+ struct intel_link_m_n *m2_n2,
+ bool adjust)
+{
+ if (m_n->tu == m2_n2->tu &&
+ intel_compare_m_n(m_n->gmch_m, m_n->gmch_n,
+ m2_n2->gmch_m, m2_n2->gmch_n, !adjust) &&
+ intel_compare_m_n(m_n->link_m, m_n->link_n,
+ m2_n2->link_m, m2_n2->link_n, !adjust)) {
+ if (adjust)
+ *m2_n2 = *m_n;
- if (((((diff + clock1 + clock2) * 100)) / (clock1 + clock2)) < 105)
return true;
+ }
return false;
}
-#define for_each_intel_crtc_masked(dev, mask, intel_crtc) \
- list_for_each_entry((intel_crtc), \
- &(dev)->mode_config.crtc_list, \
- base.head) \
- if (mask & (1 <<(intel_crtc)->pipe))
-
static bool
intel_pipe_config_compare(struct drm_device *dev,
struct intel_crtc_state *current_config,
- struct intel_crtc_state *pipe_config)
+ struct intel_crtc_state *pipe_config,
+ bool adjust)
{
+ bool ret = true;
+
+#define INTEL_ERR_OR_DBG_KMS(fmt, ...) \
+ do { \
+ if (!adjust) \
+ DRM_ERROR(fmt, ##__VA_ARGS__); \
+ else \
+ DRM_DEBUG_KMS(fmt, ##__VA_ARGS__); \
+ } while (0)
+
#define PIPE_CONF_CHECK_X(name) \
if (current_config->name != pipe_config->name) { \
- DRM_ERROR("mismatch in " #name " " \
+ INTEL_ERR_OR_DBG_KMS("mismatch in " #name " " \
"(expected 0x%08x, found 0x%08x)\n", \
current_config->name, \
pipe_config->name); \
- return false; \
+ ret = false; \
}
#define PIPE_CONF_CHECK_I(name) \
if (current_config->name != pipe_config->name) { \
- DRM_ERROR("mismatch in " #name " " \
+ INTEL_ERR_OR_DBG_KMS("mismatch in " #name " " \
"(expected %i, found %i)\n", \
current_config->name, \
pipe_config->name); \
- return false; \
+ ret = false; \
+ }
+
+#define PIPE_CONF_CHECK_M_N(name) \
+ if (!intel_compare_link_m_n(¤t_config->name, \
+ &pipe_config->name,\
+ adjust)) { \
+ INTEL_ERR_OR_DBG_KMS("mismatch in " #name " " \
+ "(expected tu %i gmch %i/%i link %i/%i, " \
+ "found tu %i, gmch %i/%i link %i/%i)\n", \
+ current_config->name.tu, \
+ current_config->name.gmch_m, \
+ current_config->name.gmch_n, \
+ current_config->name.link_m, \
+ current_config->name.link_n, \
+ pipe_config->name.tu, \
+ pipe_config->name.gmch_m, \
+ pipe_config->name.gmch_n, \
+ pipe_config->name.link_m, \
+ pipe_config->name.link_n); \
+ ret = false; \
+ }
+
+#define PIPE_CONF_CHECK_M_N_ALT(name, alt_name) \
+ if (!intel_compare_link_m_n(¤t_config->name, \
+ &pipe_config->name, adjust) && \
+ !intel_compare_link_m_n(¤t_config->alt_name, \
+ &pipe_config->name, adjust)) { \
+ INTEL_ERR_OR_DBG_KMS("mismatch in " #name " " \
+ "(expected tu %i gmch %i/%i link %i/%i, " \
+ "or tu %i gmch %i/%i link %i/%i, " \
+ "found tu %i, gmch %i/%i link %i/%i)\n", \
+ current_config->name.tu, \
+ current_config->name.gmch_m, \
+ current_config->name.gmch_n, \
+ current_config->name.link_m, \
+ current_config->name.link_n, \
+ current_config->alt_name.tu, \
+ current_config->alt_name.gmch_m, \
+ current_config->alt_name.gmch_n, \
+ current_config->alt_name.link_m, \
+ current_config->alt_name.link_n, \
+ pipe_config->name.tu, \
+ pipe_config->name.gmch_m, \
+ pipe_config->name.gmch_n, \
+ pipe_config->name.link_m, \
+ pipe_config->name.link_n); \
+ ret = false; \
}
/* This is required for BDW+ where there is only one set of registers for
#define PIPE_CONF_CHECK_I_ALT(name, alt_name) \
if ((current_config->name != pipe_config->name) && \
(current_config->alt_name != pipe_config->name)) { \
- DRM_ERROR("mismatch in " #name " " \
+ INTEL_ERR_OR_DBG_KMS("mismatch in " #name " " \
"(expected %i or %i, found %i)\n", \
current_config->name, \
current_config->alt_name, \
pipe_config->name); \
- return false; \
+ ret = false; \
}
#define PIPE_CONF_CHECK_FLAGS(name, mask) \
if ((current_config->name ^ pipe_config->name) & (mask)) { \
- DRM_ERROR("mismatch in " #name "(" #mask ") " \
+ INTEL_ERR_OR_DBG_KMS("mismatch in " #name "(" #mask ") " \
"(expected %i, found %i)\n", \
current_config->name & (mask), \
pipe_config->name & (mask)); \
- return false; \
+ ret = false; \
}
#define PIPE_CONF_CHECK_CLOCK_FUZZY(name) \
if (!intel_fuzzy_clock_check(current_config->name, pipe_config->name)) { \
- DRM_ERROR("mismatch in " #name " " \
+ INTEL_ERR_OR_DBG_KMS("mismatch in " #name " " \
"(expected %i, found %i)\n", \
current_config->name, \
pipe_config->name); \
- return false; \
+ ret = false; \
}
#define PIPE_CONF_QUIRK(quirk) \
PIPE_CONF_CHECK_I(has_pch_encoder);
PIPE_CONF_CHECK_I(fdi_lanes);
- PIPE_CONF_CHECK_I(fdi_m_n.gmch_m);
- PIPE_CONF_CHECK_I(fdi_m_n.gmch_n);
- PIPE_CONF_CHECK_I(fdi_m_n.link_m);
- PIPE_CONF_CHECK_I(fdi_m_n.link_n);
- PIPE_CONF_CHECK_I(fdi_m_n.tu);
+ PIPE_CONF_CHECK_M_N(fdi_m_n);
PIPE_CONF_CHECK_I(has_dp_encoder);
+ PIPE_CONF_CHECK_I(lane_count);
if (INTEL_INFO(dev)->gen < 8) {
- PIPE_CONF_CHECK_I(dp_m_n.gmch_m);
- PIPE_CONF_CHECK_I(dp_m_n.gmch_n);
- PIPE_CONF_CHECK_I(dp_m_n.link_m);
- PIPE_CONF_CHECK_I(dp_m_n.link_n);
- PIPE_CONF_CHECK_I(dp_m_n.tu);
-
- if (current_config->has_drrs) {
- PIPE_CONF_CHECK_I(dp_m2_n2.gmch_m);
- PIPE_CONF_CHECK_I(dp_m2_n2.gmch_n);
- PIPE_CONF_CHECK_I(dp_m2_n2.link_m);
- PIPE_CONF_CHECK_I(dp_m2_n2.link_n);
- PIPE_CONF_CHECK_I(dp_m2_n2.tu);
- }
- } else {
- PIPE_CONF_CHECK_I_ALT(dp_m_n.gmch_m, dp_m2_n2.gmch_m);
- PIPE_CONF_CHECK_I_ALT(dp_m_n.gmch_n, dp_m2_n2.gmch_n);
- PIPE_CONF_CHECK_I_ALT(dp_m_n.link_m, dp_m2_n2.link_m);
- PIPE_CONF_CHECK_I_ALT(dp_m_n.link_n, dp_m2_n2.link_n);
- PIPE_CONF_CHECK_I_ALT(dp_m_n.tu, dp_m2_n2.tu);
- }
+ PIPE_CONF_CHECK_M_N(dp_m_n);
+
+ PIPE_CONF_CHECK_I(has_drrs);
+ if (current_config->has_drrs)
+ PIPE_CONF_CHECK_M_N(dp_m2_n2);
+ } else
+ PIPE_CONF_CHECK_M_N_ALT(dp_m_n, dp_m2_n2);
PIPE_CONF_CHECK_I(base.adjusted_mode.crtc_hdisplay);
PIPE_CONF_CHECK_I(base.adjusted_mode.crtc_htotal);
PIPE_CONF_CHECK_I(pipe_src_w);
PIPE_CONF_CHECK_I(pipe_src_h);
- /*
- * FIXME: BIOS likes to set up a cloned config with lvds+external
- * screen. Since we don't yet re-compute the pipe config when moving
- * just the lvds port away to another pipe the sw tracking won't match.
- *
- * Proper atomic modesets with recomputed global state will fix this.
- * Until then just don't check gmch state for inherited modes.
- */
- if (!PIPE_CONF_QUIRK(PIPE_CONFIG_QUIRK_INHERITED_MODE)) {
- PIPE_CONF_CHECK_I(gmch_pfit.control);
- /* pfit ratios are autocomputed by the hw on gen4+ */
- if (INTEL_INFO(dev)->gen < 4)
- PIPE_CONF_CHECK_I(gmch_pfit.pgm_ratios);
- PIPE_CONF_CHECK_I(gmch_pfit.lvds_border_bits);
- }
+ PIPE_CONF_CHECK_X(gmch_pfit.control);
+ /* pfit ratios are autocomputed by the hw on gen4+ */
+ if (INTEL_INFO(dev)->gen < 4)
+ PIPE_CONF_CHECK_I(gmch_pfit.pgm_ratios);
+ PIPE_CONF_CHECK_X(gmch_pfit.lvds_border_bits);
PIPE_CONF_CHECK_I(pch_pfit.enabled);
if (current_config->pch_pfit.enabled) {
- PIPE_CONF_CHECK_I(pch_pfit.pos);
- PIPE_CONF_CHECK_I(pch_pfit.size);
+ PIPE_CONF_CHECK_X(pch_pfit.pos);
+ PIPE_CONF_CHECK_X(pch_pfit.size);
}
PIPE_CONF_CHECK_I(scaler_state.scaler_id);
#undef PIPE_CONF_CHECK_FLAGS
#undef PIPE_CONF_CHECK_CLOCK_FUZZY
#undef PIPE_CONF_QUIRK
+#undef INTEL_ERR_OR_DBG_KMS
- return true;
+ return ret;
}
static void check_wm_state(struct drm_device *dev)
}
static void
-check_connector_state(struct drm_device *dev)
+check_connector_state(struct drm_device *dev,
+ struct drm_atomic_state *old_state)
{
- struct intel_connector *connector;
+ struct drm_connector_state *old_conn_state;
+ struct drm_connector *connector;
+ int i;
+
+ for_each_connector_in_state(old_state, connector, old_conn_state, i) {
+ struct drm_encoder *encoder = connector->encoder;
+ struct drm_connector_state *state = connector->state;
- for_each_intel_connector(dev, connector) {
/* This also checks the encoder/connector hw state with the
* ->get_hw_state callbacks. */
- intel_connector_check_state(connector);
+ intel_connector_check_state(to_intel_connector(connector));
- I915_STATE_WARN(&connector->new_encoder->base != connector->base.encoder,
- "connector's staged encoder doesn't match current encoder\n");
+ I915_STATE_WARN(state->best_encoder != encoder,
+ "connector's atomic encoder doesn't match legacy encoder\n");
}
}
for_each_intel_encoder(dev, encoder) {
bool enabled = false;
- bool active = false;
- enum pipe pipe, tracked_pipe;
+ enum pipe pipe;
DRM_DEBUG_KMS("[ENCODER:%d:%s]\n",
encoder->base.base.id,
encoder->base.name);
- I915_STATE_WARN(&encoder->new_crtc->base != encoder->base.crtc,
- "encoder's stage crtc doesn't match current crtc\n");
- I915_STATE_WARN(encoder->connectors_active && !encoder->base.crtc,
- "encoder's active_connectors set, but no crtc\n");
-
for_each_intel_connector(dev, connector) {
- if (connector->base.encoder != &encoder->base)
+ if (connector->base.state->best_encoder != &encoder->base)
continue;
enabled = true;
- if (connector->base.dpms != DRM_MODE_DPMS_OFF)
- active = true;
+
+ I915_STATE_WARN(connector->base.state->crtc !=
+ encoder->base.crtc,
+ "connector's crtc doesn't match encoder crtc\n");
}
- /*
- * for MST connectors if we unplug the connector is gone
- * away but the encoder is still connected to a crtc
- * until a modeset happens in response to the hotplug.
- */
- if (!enabled && encoder->base.encoder_type == DRM_MODE_ENCODER_DPMST)
- continue;
I915_STATE_WARN(!!encoder->base.crtc != enabled,
"encoder's enabled state mismatch "
"(expected %i, found %i)\n",
!!encoder->base.crtc, enabled);
- I915_STATE_WARN(active && !encoder->base.crtc,
- "active encoder with no crtc\n");
- I915_STATE_WARN(encoder->connectors_active != active,
- "encoder's computed active state doesn't match tracked active state "
- "(expected %i, found %i)\n", active, encoder->connectors_active);
-
- active = encoder->get_hw_state(encoder, &pipe);
- I915_STATE_WARN(active != encoder->connectors_active,
- "encoder's hw state doesn't match sw tracking "
- "(expected %i, found %i)\n",
- encoder->connectors_active, active);
-
- if (!encoder->base.crtc)
- continue;
-
- tracked_pipe = to_intel_crtc(encoder->base.crtc)->pipe;
- I915_STATE_WARN(active && pipe != tracked_pipe,
- "active encoder's pipe doesn't match"
- "(expected %i, found %i)\n",
- tracked_pipe, pipe);
+ if (!encoder->base.crtc) {
+ bool active;
+ active = encoder->get_hw_state(encoder, &pipe);
+ I915_STATE_WARN(active,
+ "encoder detached but still enabled on pipe %c.\n",
+ pipe_name(pipe));
+ }
}
}
static void
-check_crtc_state(struct drm_device *dev)
+check_crtc_state(struct drm_device *dev, struct drm_atomic_state *old_state)
{
struct drm_i915_private *dev_priv = dev->dev_private;
- struct intel_crtc *crtc;
struct intel_encoder *encoder;
- struct intel_crtc_state pipe_config;
+ struct drm_crtc_state *old_crtc_state;
+ struct drm_crtc *crtc;
+ int i;
- for_each_intel_crtc(dev, crtc) {
- bool enabled = false;
- bool active = false;
+ for_each_crtc_in_state(old_state, crtc, old_crtc_state, i) {
+ struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+ struct intel_crtc_state *pipe_config, *sw_config;
+ bool active;
- memset(&pipe_config, 0, sizeof(pipe_config));
+ if (!needs_modeset(crtc->state))
+ continue;
- DRM_DEBUG_KMS("[CRTC:%d]\n",
- crtc->base.base.id);
+ __drm_atomic_helper_crtc_destroy_state(crtc, old_crtc_state);
+ pipe_config = to_intel_crtc_state(old_crtc_state);
+ memset(pipe_config, 0, sizeof(*pipe_config));
+ pipe_config->base.crtc = crtc;
+ pipe_config->base.state = old_state;
- I915_STATE_WARN(crtc->active && !crtc->base.state->enable,
- "active crtc, but not enabled in sw tracking\n");
+ DRM_DEBUG_KMS("[CRTC:%d]\n",
+ crtc->base.id);
- for_each_intel_encoder(dev, encoder) {
- if (encoder->base.crtc != &crtc->base)
- continue;
- enabled = true;
- if (encoder->connectors_active)
- active = true;
- }
+ active = dev_priv->display.get_pipe_config(intel_crtc,
+ pipe_config);
- I915_STATE_WARN(active != crtc->active,
- "crtc's computed active state doesn't match tracked active state "
- "(expected %i, found %i)\n", active, crtc->active);
- I915_STATE_WARN(enabled != crtc->base.state->enable,
- "crtc's computed enabled state doesn't match tracked enabled state "
- "(expected %i, found %i)\n", enabled,
- crtc->base.state->enable);
+ /* hw state is inconsistent with the pipe quirk */
+ if ((intel_crtc->pipe == PIPE_A && dev_priv->quirks & QUIRK_PIPEA_FORCE) ||
+ (intel_crtc->pipe == PIPE_B && dev_priv->quirks & QUIRK_PIPEB_FORCE))
+ active = crtc->state->active;
- active = dev_priv->display.get_pipe_config(crtc,
- &pipe_config);
+ I915_STATE_WARN(crtc->state->active != active,
+ "crtc active state doesn't match with hw state "
+ "(expected %i, found %i)\n", crtc->state->active, active);
- /* hw state is inconsistent with the pipe quirk */
- if ((crtc->pipe == PIPE_A && dev_priv->quirks & QUIRK_PIPEA_FORCE) ||
- (crtc->pipe == PIPE_B && dev_priv->quirks & QUIRK_PIPEB_FORCE))
- active = crtc->active;
+ I915_STATE_WARN(intel_crtc->active != crtc->state->active,
+ "transitional active state does not match atomic hw state "
+ "(expected %i, found %i)\n", crtc->state->active, intel_crtc->active);
- for_each_intel_encoder(dev, encoder) {
+ for_each_encoder_on_crtc(dev, crtc, encoder) {
enum pipe pipe;
- if (encoder->base.crtc != &crtc->base)
- continue;
- if (encoder->get_hw_state(encoder, &pipe))
- encoder->get_config(encoder, &pipe_config);
+
+ active = encoder->get_hw_state(encoder, &pipe);
+ I915_STATE_WARN(active != crtc->state->active,
+ "[ENCODER:%i] active %i with crtc active %i\n",
+ encoder->base.base.id, active, crtc->state->active);
+
+ I915_STATE_WARN(active && intel_crtc->pipe != pipe,
+ "Encoder connected to wrong pipe %c\n",
+ pipe_name(pipe));
+
+ if (active)
+ encoder->get_config(encoder, pipe_config);
}
- I915_STATE_WARN(crtc->active != active,
- "crtc active state doesn't match with hw state "
- "(expected %i, found %i)\n", crtc->active, active);
+ if (!crtc->state->active)
+ continue;
- if (active &&
- !intel_pipe_config_compare(dev, crtc->config, &pipe_config)) {
+ sw_config = to_intel_crtc_state(crtc->state);
+ if (!intel_pipe_config_compare(dev, sw_config,
+ pipe_config, false)) {
I915_STATE_WARN(1, "pipe state doesn't match!\n");
- intel_dump_pipe_config(crtc, &pipe_config,
+ intel_dump_pipe_config(intel_crtc, pipe_config,
"[hw state]");
- intel_dump_pipe_config(crtc, crtc->config,
+ intel_dump_pipe_config(intel_crtc, sw_config,
"[sw state]");
}
}
}
}
-void
-intel_modeset_check_state(struct drm_device *dev)
+static void
+intel_modeset_check_state(struct drm_device *dev,
+ struct drm_atomic_state *old_state)
{
check_wm_state(dev);
- check_connector_state(dev);
+ check_connector_state(dev, old_state);
check_encoder_state(dev);
- check_crtc_state(dev);
+ check_crtc_state(dev, old_state);
check_shared_dpll_state(dev);
}
crtc->scanline_offset = 1;
}
-static struct intel_crtc_state *
-intel_modeset_compute_config(struct drm_crtc *crtc,
- struct drm_atomic_state *state)
-{
- struct intel_crtc_state *pipe_config;
- int ret = 0;
-
- ret = drm_atomic_add_affected_connectors(state, crtc);
- if (ret)
- return ERR_PTR(ret);
-
- ret = drm_atomic_helper_check_modeset(state->dev, state);
- if (ret)
- return ERR_PTR(ret);
-
- /*
- * Note this needs changes when we start tracking multiple modes
- * and crtcs. At that point we'll need to compute the whole config
- * (i.e. one pipe_config for each crtc) rather than just the one
- * for this crtc.
- */
- pipe_config = intel_atomic_get_crtc_state(state, to_intel_crtc(crtc));
- if (IS_ERR(pipe_config))
- return pipe_config;
-
- if (!pipe_config->base.enable)
- return pipe_config;
-
- ret = intel_modeset_pipe_config(crtc, state, pipe_config);
- if (ret)
- return ERR_PTR(ret);
-
- /* Check things that can only be changed through modeset */
- if (pipe_config->has_audio !=
- to_intel_crtc(crtc)->config->has_audio)
- pipe_config->base.mode_changed = true;
-
- /*
- * Note we have an issue here with infoframes: current code
- * only updates them on the full mode set path per hw
- * requirements. So here we should be checking for any
- * required changes and forcing a mode set.
- */
-
- intel_dump_pipe_config(to_intel_crtc(crtc), pipe_config,"[modeset]");
-
- ret = drm_atomic_helper_check_planes(state->dev, state);
- if (ret)
- return ERR_PTR(ret);
-
- return pipe_config;
-}
-
-static int __intel_set_mode_setup_plls(struct drm_atomic_state *state)
+static void intel_modeset_clear_plls(struct drm_atomic_state *state)
{
struct drm_device *dev = state->dev;
struct drm_i915_private *dev_priv = to_i915(dev);
- unsigned clear_pipes = 0;
+ struct intel_shared_dpll_config *shared_dpll = NULL;
struct intel_crtc *intel_crtc;
struct intel_crtc_state *intel_crtc_state;
struct drm_crtc *crtc;
struct drm_crtc_state *crtc_state;
- int ret = 0;
int i;
if (!dev_priv->display.crtc_compute_clock)
- return 0;
-
- for_each_crtc_in_state(state, crtc, crtc_state, i) {
- intel_crtc = to_intel_crtc(crtc);
- intel_crtc_state = to_intel_crtc_state(crtc_state);
-
- if (needs_modeset(crtc_state)) {
- clear_pipes |= 1 << intel_crtc->pipe;
- intel_crtc_state->shared_dpll = DPLL_ID_PRIVATE;
- }
- }
-
- ret = intel_shared_dpll_start_config(dev_priv, clear_pipes);
- if (ret)
- goto done;
+ return;
for_each_crtc_in_state(state, crtc, crtc_state, i) {
- if (!needs_modeset(crtc_state) || !crtc_state->enable)
- continue;
+ int dpll;
intel_crtc = to_intel_crtc(crtc);
intel_crtc_state = to_intel_crtc_state(crtc_state);
+ dpll = intel_crtc_state->shared_dpll;
- ret = dev_priv->display.crtc_compute_clock(intel_crtc,
- intel_crtc_state);
- if (ret) {
- intel_shared_dpll_abort_config(dev_priv);
- goto done;
- }
- }
+ if (!needs_modeset(crtc_state) || dpll == DPLL_ID_PRIVATE)
+ continue;
-done:
- return ret;
-}
+ intel_crtc_state->shared_dpll = DPLL_ID_PRIVATE;
-/* Code that should eventually be part of atomic_check() */
-static int __intel_set_mode_checks(struct drm_atomic_state *state)
-{
- struct drm_device *dev = state->dev;
- int ret;
+ if (!shared_dpll)
+ shared_dpll = intel_atomic_get_shared_dpll_state(state);
- /*
- * See if the config requires any additional preparation, e.g.
- * to adjust global state with pipes off. We need to do this
- * here so we can get the modeset_pipe updated config for the new
- * mode set on this crtc. For other crtcs we need to use the
- * adjusted_mode bits in the crtc directly.
- */
- if (IS_VALLEYVIEW(dev) || IS_BROXTON(dev)) {
- ret = valleyview_modeset_global_pipes(state);
- if (ret)
- return ret;
+ shared_dpll[dpll].crtc_mask &= ~(1 << intel_crtc->pipe);
}
-
- ret = __intel_set_mode_setup_plls(state);
- if (ret)
- return ret;
-
- return 0;
}
-static int __intel_set_mode(struct drm_crtc *modeset_crtc,
- struct intel_crtc_state *pipe_config)
+/*
+ * This implements the workaround described in the "notes" section of the mode
+ * set sequence documentation. When going from no pipes or single pipe to
+ * multiple pipes, and planes are enabled after the pipe, we need to wait at
+ * least 2 vblanks on the first pipe before enabling planes on the second pipe.
+ */
+static int haswell_mode_set_planes_workaround(struct drm_atomic_state *state)
{
- struct drm_device *dev = modeset_crtc->dev;
- struct drm_i915_private *dev_priv = dev->dev_private;
- struct drm_atomic_state *state = pipe_config->base.state;
- struct drm_crtc *crtc;
struct drm_crtc_state *crtc_state;
- int ret = 0;
+ struct intel_crtc *intel_crtc;
+ struct drm_crtc *crtc;
+ struct intel_crtc_state *first_crtc_state = NULL;
+ struct intel_crtc_state *other_crtc_state = NULL;
+ enum pipe first_pipe = INVALID_PIPE, enabled_pipe = INVALID_PIPE;
int i;
- ret = __intel_set_mode_checks(state);
- if (ret < 0)
- return ret;
-
- ret = drm_atomic_helper_prepare_planes(dev, state);
- if (ret)
- return ret;
-
+ /* look at all crtc's that are going to be enabled in during modeset */
for_each_crtc_in_state(state, crtc, crtc_state, i) {
- if (!needs_modeset(crtc_state))
+ intel_crtc = to_intel_crtc(crtc);
+
+ if (!crtc_state->active || !needs_modeset(crtc_state))
continue;
- if (!crtc_state->enable) {
- if (crtc->state->enable)
- intel_crtc_disable(crtc);
- } else if (crtc->state->enable) {
- intel_crtc_disable_planes(crtc);
- dev_priv->display.crtc_disable(crtc);
+ if (first_crtc_state) {
+ other_crtc_state = to_intel_crtc_state(crtc_state);
+ break;
+ } else {
+ first_crtc_state = to_intel_crtc_state(crtc_state);
+ first_pipe = intel_crtc->pipe;
}
}
- /* crtc->mode is already used by the ->mode_set callbacks, hence we need
- * to set it here already despite that we pass it down the callchain.
- *
- * Note we'll need to fix this up when we start tracking multiple
- * pipes; here we assume a single modeset_pipe and only track the
- * single crtc and mode.
- */
- if (pipe_config->base.enable && needs_modeset(&pipe_config->base)) {
- modeset_crtc->mode = pipe_config->base.mode;
-
- /*
- * Calculate and store various constants which
- * are later needed by vblank and swap-completion
- * timestamping. They are derived from true hwmode.
- */
- drm_calc_timestamping_constants(modeset_crtc,
- &pipe_config->base.adjusted_mode);
- }
+ /* No workaround needed? */
+ if (!first_crtc_state)
+ return 0;
- /* Only after disabling all output pipelines that will be changed can we
- * update the the output configuration. */
- intel_modeset_update_state(state);
+ /* w/a possibly needed, check how many crtc's are already enabled. */
+ for_each_intel_crtc(state->dev, intel_crtc) {
+ struct intel_crtc_state *pipe_config;
- /* The state has been swaped above, so state actually contains the
- * old state now. */
+ pipe_config = intel_atomic_get_crtc_state(state, intel_crtc);
+ if (IS_ERR(pipe_config))
+ return PTR_ERR(pipe_config);
- modeset_update_crtc_power_domains(state);
+ pipe_config->hsw_workaround_pipe = INVALID_PIPE;
- /* Now enable the clocks, plane, pipe, and connectors that we set up. */
- for_each_crtc_in_state(state, crtc, crtc_state, i) {
- if (!needs_modeset(crtc->state) || !crtc->state->enable) {
- drm_atomic_helper_commit_planes_on_crtc(crtc_state);
+ if (!pipe_config->base.active ||
+ needs_modeset(&pipe_config->base))
continue;
- }
- update_scanline_offset(to_intel_crtc(crtc));
+ /* 2 or more enabled crtcs means no need for w/a */
+ if (enabled_pipe != INVALID_PIPE)
+ return 0;
- dev_priv->display.crtc_enable(crtc);
- drm_atomic_helper_commit_planes_on_crtc(crtc_state);
+ enabled_pipe = intel_crtc->pipe;
}
- /* FIXME: add subpixel order */
-
- drm_atomic_helper_cleanup_planes(dev, state);
-
- drm_atomic_state_free(state);
+ if (enabled_pipe != INVALID_PIPE)
+ first_crtc_state->hsw_workaround_pipe = enabled_pipe;
+ else if (other_crtc_state)
+ other_crtc_state->hsw_workaround_pipe = first_pipe;
return 0;
}
-static int intel_set_mode_with_config(struct drm_crtc *crtc,
- struct intel_crtc_state *pipe_config,
- bool force_restore)
+static int intel_modeset_all_pipes(struct drm_atomic_state *state)
{
- int ret;
+ struct drm_crtc *crtc;
+ struct drm_crtc_state *crtc_state;
+ int ret = 0;
- ret = __intel_set_mode(crtc, pipe_config);
+ /* add all active pipes to the state */
+ for_each_crtc(state->dev, crtc) {
+ crtc_state = drm_atomic_get_crtc_state(state, crtc);
+ if (IS_ERR(crtc_state))
+ return PTR_ERR(crtc_state);
- if (ret == 0 && force_restore) {
- intel_modeset_update_staged_output_state(crtc->dev);
- intel_modeset_check_state(crtc->dev);
- }
+ if (!crtc_state->active || needs_modeset(crtc_state))
+ continue;
- return ret;
-}
+ crtc_state->mode_changed = true;
-static int intel_set_mode(struct drm_crtc *crtc,
- struct drm_atomic_state *state,
- bool force_restore)
-{
- struct intel_crtc_state *pipe_config;
- int ret = 0;
+ ret = drm_atomic_add_affected_connectors(state, crtc);
+ if (ret)
+ break;
- pipe_config = intel_modeset_compute_config(crtc, state);
- if (IS_ERR(pipe_config)) {
- ret = PTR_ERR(pipe_config);
- goto out;
+ ret = drm_atomic_add_affected_planes(state, crtc);
+ if (ret)
+ break;
}
- ret = intel_set_mode_with_config(crtc, pipe_config, force_restore);
- if (ret)
- goto out;
-
-out:
return ret;
}
-void intel_crtc_restore_mode(struct drm_crtc *crtc)
+
+static int intel_modeset_checks(struct drm_atomic_state *state)
{
- struct drm_device *dev = crtc->dev;
- struct drm_atomic_state *state;
- struct intel_encoder *encoder;
- struct intel_connector *connector;
- struct drm_connector_state *connector_state;
- struct intel_crtc_state *crtc_state;
+ struct drm_device *dev = state->dev;
+ struct drm_i915_private *dev_priv = dev->dev_private;
int ret;
- state = drm_atomic_state_alloc(dev);
- if (!state) {
- DRM_DEBUG_KMS("[CRTC:%d] mode restore failed, out of memory",
- crtc->base.id);
- return;
- }
-
- state->acquire_ctx = dev->mode_config.acquire_ctx;
-
- /* The force restore path in the HW readout code relies on the staged
- * config still keeping the user requested config while the actual
- * state has been overwritten by the configuration read from HW. We
- * need to copy the staged config to the atomic state, otherwise the
- * mode set will just reapply the state the HW is already in. */
- for_each_intel_encoder(dev, encoder) {
- if (&encoder->new_crtc->base != crtc)
- continue;
-
- for_each_intel_connector(dev, connector) {
- if (connector->new_encoder != encoder)
- continue;
-
- connector_state = drm_atomic_get_connector_state(state, &connector->base);
- if (IS_ERR(connector_state)) {
- DRM_DEBUG_KMS("Failed to add [CONNECTOR:%d:%s] to state: %ld\n",
- connector->base.base.id,
- connector->base.name,
- PTR_ERR(connector_state));
- continue;
- }
-
- connector_state->crtc = crtc;
- connector_state->best_encoder = &encoder->base;
- }
- }
-
- crtc_state = intel_atomic_get_crtc_state(state, to_intel_crtc(crtc));
- if (IS_ERR(crtc_state)) {
- DRM_DEBUG_KMS("Failed to add [CRTC:%d] to state: %ld\n",
- crtc->base.id, PTR_ERR(crtc_state));
- drm_atomic_state_free(state);
- return;
+ if (!check_digital_port_conflicts(state)) {
+ DRM_DEBUG_KMS("rejecting conflicting digital port configuration\n");
+ return -EINVAL;
}
- crtc_state->base.active = crtc_state->base.enable =
- to_intel_crtc(crtc)->new_enabled;
-
- drm_mode_copy(&crtc_state->base.mode, &crtc->mode);
+ /*
+ * See if the config requires any additional preparation, e.g.
+ * to adjust global state with pipes off. We need to do this
+ * here so we can get the modeset_pipe updated config for the new
+ * mode set on this crtc. For other crtcs we need to use the
+ * adjusted_mode bits in the crtc directly.
+ */
+ if (dev_priv->display.modeset_calc_cdclk) {
+ unsigned int cdclk;
- intel_modeset_setup_plane_state(state, crtc, &crtc->mode,
- crtc->primary->fb, crtc->x, crtc->y);
+ ret = dev_priv->display.modeset_calc_cdclk(state);
- ret = intel_set_mode(crtc, state, false);
- if (ret)
- drm_atomic_state_free(state);
-}
+ cdclk = to_intel_atomic_state(state)->cdclk;
+ if (!ret && cdclk != dev_priv->cdclk_freq)
+ ret = intel_modeset_all_pipes(state);
-#undef for_each_intel_crtc_masked
+ if (ret < 0)
+ return ret;
+ } else
+ to_intel_atomic_state(state)->cdclk = dev_priv->cdclk_freq;
-static bool intel_connector_in_mode_set(struct intel_connector *connector,
- struct drm_mode_set *set)
-{
- int ro;
+ intel_modeset_clear_plls(state);
- for (ro = 0; ro < set->num_connectors; ro++)
- if (set->connectors[ro] == &connector->base)
- return true;
+ if (IS_HASWELL(dev))
+ return haswell_mode_set_planes_workaround(state);
- return false;
+ return 0;
}
-static int
-intel_modeset_stage_output_state(struct drm_device *dev,
- struct drm_mode_set *set,
- struct drm_atomic_state *state)
+/**
+ * intel_atomic_check - validate state object
+ * @dev: drm device
+ * @state: state to validate
+ */
+static int intel_atomic_check(struct drm_device *dev,
+ struct drm_atomic_state *state)
{
- struct intel_connector *connector;
- struct drm_connector *drm_connector;
- struct drm_connector_state *connector_state;
struct drm_crtc *crtc;
struct drm_crtc_state *crtc_state;
- int i, ret;
+ int ret, i;
+ bool any_ms = false;
- /* The upper layers ensure that we either disable a crtc or have a list
- * of connectors. For paranoia, double-check this. */
- WARN_ON(!set->fb && (set->num_connectors != 0));
- WARN_ON(set->fb && (set->num_connectors == 0));
-
- for_each_intel_connector(dev, connector) {
- bool in_mode_set = intel_connector_in_mode_set(connector, set);
+ ret = drm_atomic_helper_check_modeset(dev, state);
+ if (ret)
+ return ret;
- if (!in_mode_set && connector->base.state->crtc != set->crtc)
- continue;
+ for_each_crtc_in_state(state, crtc, crtc_state, i) {
+ struct intel_crtc_state *pipe_config =
+ to_intel_crtc_state(crtc_state);
- connector_state =
- drm_atomic_get_connector_state(state, &connector->base);
- if (IS_ERR(connector_state))
- return PTR_ERR(connector_state);
+ /* Catch I915_MODE_FLAG_INHERITED */
+ if (crtc_state->mode.private_flags != crtc->state->mode.private_flags)
+ crtc_state->mode_changed = true;
- if (in_mode_set) {
- int pipe = to_intel_crtc(set->crtc)->pipe;
- connector_state->best_encoder =
- &intel_find_encoder(connector, pipe)->base;
+ if (!crtc_state->enable) {
+ if (needs_modeset(crtc_state))
+ any_ms = true;
+ continue;
}
- if (connector->base.state->crtc != set->crtc)
+ if (!needs_modeset(crtc_state))
continue;
- /* If we disable the crtc, disable all its connectors. Also, if
- * the connector is on the changing crtc but not on the new
- * connector list, disable it. */
- if (!set->fb || !in_mode_set) {
- connector_state->best_encoder = NULL;
-
- DRM_DEBUG_KMS("[CONNECTOR:%d:%s] to [NOCRTC]\n",
- connector->base.base.id,
- connector->base.name);
- }
- }
- /* connector->new_encoder is now updated for all connectors. */
+ /* FIXME: For only active_changed we shouldn't need to do any
+ * state recomputation at all. */
- for_each_connector_in_state(state, drm_connector, connector_state, i) {
- connector = to_intel_connector(drm_connector);
+ ret = drm_atomic_add_affected_connectors(state, crtc);
+ if (ret)
+ return ret;
- if (!connector_state->best_encoder) {
- ret = drm_atomic_set_crtc_for_connector(connector_state,
- NULL);
- if (ret)
- return ret;
+ ret = intel_modeset_pipe_config(crtc, pipe_config);
+ if (ret)
+ return ret;
- continue;
+ if (i915.fastboot &&
+ intel_pipe_config_compare(state->dev,
+ to_intel_crtc_state(crtc->state),
+ pipe_config, true)) {
+ crtc_state->mode_changed = false;
}
- if (intel_connector_in_mode_set(connector, set)) {
- struct drm_crtc *crtc = connector->base.state->crtc;
-
- /* If this connector was in a previous crtc, add it
- * to the state. We might need to disable it. */
- if (crtc) {
- crtc_state =
- drm_atomic_get_crtc_state(state, crtc);
- if (IS_ERR(crtc_state))
- return PTR_ERR(crtc_state);
- }
+ if (needs_modeset(crtc_state)) {
+ any_ms = true;
- ret = drm_atomic_set_crtc_for_connector(connector_state,
- set->crtc);
+ ret = drm_atomic_add_affected_planes(state, crtc);
if (ret)
return ret;
}
- /* Make sure the new CRTC will work with the encoder */
- if (!drm_encoder_crtc_ok(connector_state->best_encoder,
- connector_state->crtc)) {
- return -EINVAL;
- }
-
- DRM_DEBUG_KMS("[CONNECTOR:%d:%s] to [CRTC:%d]\n",
- connector->base.base.id,
- connector->base.name,
- connector_state->crtc->base.id);
-
- if (connector_state->best_encoder != &connector->encoder->base)
- connector->encoder =
- to_intel_encoder(connector_state->best_encoder);
+ intel_dump_pipe_config(to_intel_crtc(crtc), pipe_config,
+ needs_modeset(crtc_state) ?
+ "[modeset]" : "[fastset]");
}
- for_each_crtc_in_state(state, crtc, crtc_state, i) {
- bool has_connectors;
+ if (any_ms) {
+ ret = intel_modeset_checks(state);
- ret = drm_atomic_add_affected_connectors(state, crtc);
if (ret)
return ret;
+ } else
+ to_intel_atomic_state(state)->cdclk =
+ to_i915(state->dev)->cdclk_freq;
+
+ return drm_atomic_helper_check_planes(state->dev, state);
+}
+
+/**
+ * intel_atomic_commit - commit validated state object
+ * @dev: DRM device
+ * @state: the top-level driver state object
+ * @async: asynchronous commit
+ *
+ * This function commits a top-level state object that has been validated
+ * with drm_atomic_helper_check().
+ *
+ * FIXME: Atomic modeset support for i915 is not yet complete. At the moment
+ * we can only handle plane-related operations and do not yet support
+ * asynchronous commit.
+ *
+ * RETURNS
+ * Zero for success or -errno.
+ */
+static int intel_atomic_commit(struct drm_device *dev,
+ struct drm_atomic_state *state,
+ bool async)
+{
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ struct drm_crtc *crtc;
+ struct drm_crtc_state *crtc_state;
+ int ret = 0;
+ int i;
+ bool any_ms = false;
- has_connectors = !!drm_atomic_connectors_for_crtc(state, crtc);
- if (has_connectors != crtc_state->enable)
- crtc_state->enable =
- crtc_state->active = has_connectors;
+ if (async) {
+ DRM_DEBUG_KMS("i915 does not yet support async commit\n");
+ return -EINVAL;
}
- ret = intel_modeset_setup_plane_state(state, set->crtc, set->mode,
- set->fb, set->x, set->y);
+ ret = drm_atomic_helper_prepare_planes(dev, state);
if (ret)
return ret;
- crtc_state = drm_atomic_get_crtc_state(state, set->crtc);
- if (IS_ERR(crtc_state))
- return PTR_ERR(crtc_state);
+ drm_atomic_helper_swap_state(dev, state);
- if (set->mode)
- drm_mode_copy(&crtc_state->mode, set->mode);
+ for_each_crtc_in_state(state, crtc, crtc_state, i) {
+ struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
- if (set->num_connectors)
- crtc_state->active = true;
+ if (!needs_modeset(crtc->state))
+ continue;
- return 0;
-}
+ any_ms = true;
+ intel_pre_plane_update(intel_crtc);
-static int intel_crtc_set_config(struct drm_mode_set *set)
-{
- struct drm_device *dev;
- struct drm_atomic_state *state = NULL;
- struct intel_crtc_state *pipe_config;
- int ret;
+ if (crtc_state->active) {
+ intel_crtc_disable_planes(crtc, crtc_state->plane_mask);
+ dev_priv->display.crtc_disable(crtc);
+ intel_crtc->active = false;
+ intel_disable_shared_dpll(intel_crtc);
+ }
+ }
- BUG_ON(!set);
- BUG_ON(!set->crtc);
- BUG_ON(!set->crtc->helper_private);
+ /* Only after disabling all output pipelines that will be changed can we
+ * update the the output configuration. */
+ intel_modeset_update_crtc_state(state);
- /* Enforce sane interface api - has been abused by the fb helper. */
- BUG_ON(!set->mode && set->fb);
- BUG_ON(set->fb && set->num_connectors == 0);
+ if (any_ms) {
+ intel_shared_dpll_commit(state);
- if (set->fb) {
- DRM_DEBUG_KMS("[CRTC:%d] [FB:%d] #connectors=%d (x y) (%i %i)\n",
- set->crtc->base.id, set->fb->base.id,
- (int)set->num_connectors, set->x, set->y);
- } else {
- DRM_DEBUG_KMS("[CRTC:%d] [NOFB]\n", set->crtc->base.id);
+ drm_atomic_helper_update_legacy_modeset_state(state->dev, state);
+ modeset_update_crtc_power_domains(state);
}
- dev = set->crtc->dev;
+ /* Now enable the clocks, plane, pipe, and connectors that we set up. */
+ for_each_crtc_in_state(state, crtc, crtc_state, i) {
+ struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+ bool modeset = needs_modeset(crtc->state);
- state = drm_atomic_state_alloc(dev);
- if (!state)
- return -ENOMEM;
+ if (modeset && crtc->state->active) {
+ update_scanline_offset(to_intel_crtc(crtc));
+ dev_priv->display.crtc_enable(crtc);
+ }
- state->acquire_ctx = dev->mode_config.acquire_ctx;
+ if (!modeset)
+ intel_pre_plane_update(intel_crtc);
- ret = intel_modeset_stage_output_state(dev, set, state);
- if (ret)
- goto out;
+ drm_atomic_helper_commit_planes_on_crtc(crtc_state);
+ intel_post_plane_update(intel_crtc);
+ }
+
+ /* FIXME: add subpixel order */
+
+ drm_atomic_helper_wait_for_vblanks(dev, state);
+ drm_atomic_helper_cleanup_planes(dev, state);
+
+ if (any_ms)
+ intel_modeset_check_state(dev, state);
+
+ drm_atomic_state_free(state);
+
+ return 0;
+}
+
+void intel_crtc_restore_mode(struct drm_crtc *crtc)
+{
+ struct drm_device *dev = crtc->dev;
+ struct drm_atomic_state *state;
+ struct drm_crtc_state *crtc_state;
+ int ret;
- pipe_config = intel_modeset_compute_config(set->crtc, state);
- if (IS_ERR(pipe_config)) {
- ret = PTR_ERR(pipe_config);
- goto out;
+ state = drm_atomic_state_alloc(dev);
+ if (!state) {
+ DRM_DEBUG_KMS("[CRTC:%d] crtc restore failed, out of memory",
+ crtc->base.id);
+ return;
}
- intel_update_pipe_size(to_intel_crtc(set->crtc));
+ state->acquire_ctx = drm_modeset_legacy_acquire_ctx(crtc);
+
+retry:
+ crtc_state = drm_atomic_get_crtc_state(state, crtc);
+ ret = PTR_ERR_OR_ZERO(crtc_state);
+ if (!ret) {
+ if (!crtc_state->active)
+ goto out;
- ret = intel_set_mode_with_config(set->crtc, pipe_config, true);
+ crtc_state->mode_changed = true;
+ ret = drm_atomic_commit(state);
+ }
- if (ret) {
- DRM_DEBUG_KMS("failed to set mode on [CRTC:%d], err = %d\n",
- set->crtc->base.id, ret);
+ if (ret == -EDEADLK) {
+ drm_atomic_state_clear(state);
+ drm_modeset_backoff(state->acquire_ctx);
+ goto retry;
}
-out:
if (ret)
+out:
drm_atomic_state_free(state);
- return ret;
}
+#undef for_each_intel_crtc_masked
+
static const struct drm_crtc_funcs intel_crtc_funcs = {
.gamma_set = intel_crtc_gamma_set,
- .set_config = intel_crtc_set_config,
+ .set_config = drm_atomic_helper_set_config,
.destroy = intel_crtc_destroy,
.page_flip = intel_crtc_page_flip,
.atomic_duplicate_state = intel_crtc_duplicate_state,
{
struct drm_i915_private *dev_priv = dev->dev_private;
+ intel_update_cdclk(dev);
+
if (HAS_DDI(dev))
intel_ddi_pll_init(dev);
else if (HAS_PCH_IBX(dev) || HAS_PCH_CPT(dev))
BUG_ON(dev_priv->num_shared_dpll > I915_NUM_PLLS);
}
-/**
- * intel_wm_need_update - Check whether watermarks need updating
- * @plane: drm plane
- * @state: new plane state
- *
- * Check current plane state versus the new one to determine whether
- * watermarks need to be recalculated.
- *
- * Returns true or false.
- */
-bool intel_wm_need_update(struct drm_plane *plane,
- struct drm_plane_state *state)
-{
- /* Update watermarks on tiling changes. */
- if (!plane->state->fb || !state->fb ||
- plane->state->fb->modifier[0] != state->fb->modifier[0] ||
- plane->state->rotation != state->rotation)
- return true;
-
- return false;
-}
-
/**
* intel_prepare_plane_fb - Prepare fb for usage on plane
* @plane: drm plane to prepare for
*/
int
intel_prepare_plane_fb(struct drm_plane *plane,
- struct drm_framebuffer *fb,
const struct drm_plane_state *new_state)
{
struct drm_device *dev = plane->dev;
+ struct drm_framebuffer *fb = new_state->fb;
struct intel_plane *intel_plane = to_intel_plane(plane);
- enum pipe pipe = intel_plane->pipe;
struct drm_i915_gem_object *obj = intel_fb_obj(fb);
struct drm_i915_gem_object *old_obj = intel_fb_obj(plane->fb);
- unsigned frontbuffer_bits = 0;
int ret = 0;
if (!obj)
return 0;
- switch (plane->type) {
- case DRM_PLANE_TYPE_PRIMARY:
- frontbuffer_bits = INTEL_FRONTBUFFER_PRIMARY(pipe);
- break;
- case DRM_PLANE_TYPE_CURSOR:
- frontbuffer_bits = INTEL_FRONTBUFFER_CURSOR(pipe);
- break;
- case DRM_PLANE_TYPE_OVERLAY:
- frontbuffer_bits = INTEL_FRONTBUFFER_SPRITE(pipe);
- break;
- }
-
mutex_lock(&dev->struct_mutex);
if (plane->type == DRM_PLANE_TYPE_CURSOR &&
if (ret)
DRM_DEBUG_KMS("failed to attach phys object\n");
} else {
- ret = intel_pin_and_fence_fb_obj(plane, fb, new_state, NULL);
+ ret = intel_pin_and_fence_fb_obj(plane, fb, new_state, NULL, NULL);
}
if (ret == 0)
- i915_gem_track_fb(old_obj, obj, frontbuffer_bits);
+ i915_gem_track_fb(old_obj, obj, intel_plane->frontbuffer_bit);
mutex_unlock(&dev->struct_mutex);
*/
void
intel_cleanup_plane_fb(struct drm_plane *plane,
- struct drm_framebuffer *fb,
const struct drm_plane_state *old_state)
{
struct drm_device *dev = plane->dev;
- struct drm_i915_gem_object *obj = intel_fb_obj(fb);
+ struct drm_i915_gem_object *obj = intel_fb_obj(old_state->fb);
- if (WARN_ON(!obj))
+ if (!obj)
return;
if (plane->type != DRM_PLANE_TYPE_CURSOR ||
!INTEL_INFO(dev)->cursor_needs_physical) {
mutex_lock(&dev->struct_mutex);
- intel_unpin_fb_obj(fb, old_state);
+ intel_unpin_fb_obj(old_state->fb, old_state);
mutex_unlock(&dev->struct_mutex);
}
}
-int
-skl_max_scale(struct intel_crtc *intel_crtc, struct intel_crtc_state *crtc_state)
-{
- int max_scale;
- struct drm_device *dev;
- struct drm_i915_private *dev_priv;
- int crtc_clock, cdclk;
-
- if (!intel_crtc || !crtc_state)
- return DRM_PLANE_HELPER_NO_SCALING;
-
- dev = intel_crtc->base.dev;
- dev_priv = dev->dev_private;
- crtc_clock = crtc_state->base.adjusted_mode.crtc_clock;
- cdclk = dev_priv->display.get_display_clock_speed(dev);
-
- if (!crtc_clock || !cdclk)
- return DRM_PLANE_HELPER_NO_SCALING;
-
- /*
- * skl max scale is lower of:
- * close to 3 but not 3, -1 is for that purpose
- * or
- * cdclk/crtc_clock
- */
- max_scale = min((1 << 16) * 3 - 1, (1 << 8) * ((cdclk << 8) / crtc_clock));
-
- return max_scale;
-}
-
-static int
-intel_check_primary_plane(struct drm_plane *plane,
- struct intel_plane_state *state)
-{
- struct drm_device *dev = plane->dev;
- struct drm_i915_private *dev_priv = dev->dev_private;
- struct drm_crtc *crtc = state->base.crtc;
- struct intel_crtc *intel_crtc;
- struct intel_crtc_state *crtc_state;
- struct drm_framebuffer *fb = state->base.fb;
- struct drm_rect *dest = &state->dst;
- struct drm_rect *src = &state->src;
- const struct drm_rect *clip = &state->clip;
- bool can_position = false;
- int max_scale = DRM_PLANE_HELPER_NO_SCALING;
- int min_scale = DRM_PLANE_HELPER_NO_SCALING;
- int ret;
-
- crtc = crtc ? crtc : plane->crtc;
- intel_crtc = to_intel_crtc(crtc);
- crtc_state = state->base.state ?
- intel_atomic_get_crtc_state(state->base.state, intel_crtc) : NULL;
-
- if (INTEL_INFO(dev)->gen >= 9) {
- /* use scaler when colorkey is not required */
- if (to_intel_plane(plane)->ckey.flags == I915_SET_COLORKEY_NONE) {
- min_scale = 1;
- max_scale = skl_max_scale(intel_crtc, crtc_state);
- }
- can_position = true;
- }
-
- ret = drm_plane_helper_check_update(plane, crtc, fb,
- src, dest, clip,
- min_scale,
- max_scale,
- can_position, true,
- &state->visible);
- if (ret)
- return ret;
-
- if (crtc_state ? crtc_state->base.active : intel_crtc->active) {
- struct intel_plane_state *old_state =
- to_intel_plane_state(plane->state);
-
- intel_crtc->atomic.wait_for_flips = true;
-
- /*
- * FBC does not work on some platforms for rotated
- * planes, so disable it when rotation is not 0 and
- * update it when rotation is set back to 0.
- *
- * FIXME: This is redundant with the fbc update done in
- * the primary plane enable function except that that
- * one is done too late. We eventually need to unify
- * this.
- */
- if (state->visible &&
- INTEL_INFO(dev)->gen <= 4 && !IS_G4X(dev) &&
- dev_priv->fbc.crtc == intel_crtc &&
- state->base.rotation != BIT(DRM_ROTATE_0)) {
- intel_crtc->atomic.disable_fbc = true;
- }
-
- if (state->visible && !old_state->visible) {
- /*
- * BDW signals flip done immediately if the plane
- * is disabled, even if the plane enable is already
- * armed to occur at the next vblank :(
- */
- if (IS_BROADWELL(dev))
- intel_crtc->atomic.wait_vblank = true;
+int
+skl_max_scale(struct intel_crtc *intel_crtc, struct intel_crtc_state *crtc_state)
+{
+ int max_scale;
+ struct drm_device *dev;
+ struct drm_i915_private *dev_priv;
+ int crtc_clock, cdclk;
- if (crtc_state)
- intel_crtc->atomic.post_enable_primary = true;
- }
+ if (!intel_crtc || !crtc_state)
+ return DRM_PLANE_HELPER_NO_SCALING;
- /*
- * FIXME: Actually if we will still have any other plane enabled
- * on the pipe we could let IPS enabled still, but for
- * now lets consider that when we make primary invisible
- * by setting DSPCNTR to 0 on update_primary_plane function
- * IPS needs to be disable.
- */
- if (!state->visible || !fb)
- intel_crtc->atomic.disable_ips = true;
+ dev = intel_crtc->base.dev;
+ dev_priv = dev->dev_private;
+ crtc_clock = crtc_state->base.adjusted_mode.crtc_clock;
+ cdclk = to_intel_atomic_state(crtc_state->base.state)->cdclk;
- if (!state->visible && old_state->visible &&
- crtc_state && !needs_modeset(&crtc_state->base))
- intel_crtc->atomic.pre_disable_primary = true;
+ if (!crtc_clock || !cdclk)
+ return DRM_PLANE_HELPER_NO_SCALING;
- intel_crtc->atomic.fb_bits |=
- INTEL_FRONTBUFFER_PRIMARY(intel_crtc->pipe);
+ /*
+ * skl max scale is lower of:
+ * close to 3 but not 3, -1 is for that purpose
+ * or
+ * cdclk/crtc_clock
+ */
+ max_scale = min((1 << 16) * 3 - 1, (1 << 8) * ((cdclk << 8) / crtc_clock));
- intel_crtc->atomic.update_fbc = true;
+ return max_scale;
+}
- if (intel_wm_need_update(plane, &state->base))
- intel_crtc->atomic.update_wm = true;
- }
+static int
+intel_check_primary_plane(struct drm_plane *plane,
+ struct intel_crtc_state *crtc_state,
+ struct intel_plane_state *state)
+{
+ struct drm_crtc *crtc = state->base.crtc;
+ struct drm_framebuffer *fb = state->base.fb;
+ int min_scale = DRM_PLANE_HELPER_NO_SCALING;
+ int max_scale = DRM_PLANE_HELPER_NO_SCALING;
+ bool can_position = false;
- if (INTEL_INFO(dev)->gen >= 9) {
- ret = skl_update_scaler_users(intel_crtc, crtc_state,
- to_intel_plane(plane), state, 0);
- if (ret)
- return ret;
+ /* use scaler when colorkey is not required */
+ if (INTEL_INFO(plane->dev)->gen >= 9 &&
+ state->ckey.flags == I915_SET_COLORKEY_NONE) {
+ min_scale = 1;
+ max_scale = skl_max_scale(to_intel_crtc(crtc), crtc_state);
+ can_position = true;
}
- return 0;
+ return drm_plane_helper_check_update(plane, crtc, fb, &state->src,
+ &state->dst, &state->clip,
+ min_scale, max_scale,
+ can_position, true,
+ &state->visible);
}
static void
crtc->x = src->x1 >> 16;
crtc->y = src->y1 >> 16;
- if (intel_crtc->active) {
- if (state->visible)
- /* FIXME: kill this fastboot hack */
- intel_update_pipe_size(intel_crtc);
+ if (!crtc->state->active)
+ return;
+
+ if (state->visible)
+ /* FIXME: kill this fastboot hack */
+ intel_update_pipe_size(intel_crtc);
- dev_priv->display.update_primary_plane(crtc, plane->fb,
- crtc->x, crtc->y);
- }
+ dev_priv->display.update_primary_plane(crtc, fb,
+ state->src.x1 >> 16,
+ state->src.y1 >> 16);
}
static void
intel_disable_primary_plane(struct drm_plane *plane,
- struct drm_crtc *crtc,
- bool force)
+ struct drm_crtc *crtc)
{
struct drm_device *dev = plane->dev;
struct drm_i915_private *dev_priv = dev->dev_private;
dev_priv->display.update_primary_plane(crtc, NULL, 0, 0);
}
-static void intel_begin_crtc_commit(struct drm_crtc *crtc)
+static void intel_begin_crtc_commit(struct drm_crtc *crtc,
+ struct drm_crtc_state *old_crtc_state)
{
struct drm_device *dev = crtc->dev;
- struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
- struct intel_plane *intel_plane;
- struct drm_plane *p;
- unsigned fb_bits = 0;
-
- /* Track fb's for any planes being disabled */
- list_for_each_entry(p, &dev->mode_config.plane_list, head) {
- intel_plane = to_intel_plane(p);
-
- if (intel_crtc->atomic.disabled_planes &
- (1 << drm_plane_index(p))) {
- switch (p->type) {
- case DRM_PLANE_TYPE_PRIMARY:
- fb_bits = INTEL_FRONTBUFFER_PRIMARY(intel_plane->pipe);
- break;
- case DRM_PLANE_TYPE_CURSOR:
- fb_bits = INTEL_FRONTBUFFER_CURSOR(intel_plane->pipe);
- break;
- case DRM_PLANE_TYPE_OVERLAY:
- fb_bits = INTEL_FRONTBUFFER_SPRITE(intel_plane->pipe);
- break;
- }
-
- mutex_lock(&dev->struct_mutex);
- i915_gem_track_fb(intel_fb_obj(p->fb), NULL, fb_bits);
- mutex_unlock(&dev->struct_mutex);
- }
- }
-
- if (intel_crtc->atomic.wait_for_flips)
- intel_crtc_wait_for_pending_flips(crtc);
-
- if (intel_crtc->atomic.disable_fbc)
- intel_fbc_disable(dev);
-
- if (intel_crtc->atomic.disable_ips)
- hsw_disable_ips(intel_crtc);
-
- if (intel_crtc->atomic.pre_disable_primary)
- intel_pre_disable_primary(crtc);
- if (intel_crtc->atomic.update_wm)
+ if (intel_crtc->atomic.update_wm_pre)
intel_update_watermarks(crtc);
- intel_runtime_pm_get(dev_priv);
-
/* Perform vblank evasion around commit operation */
- if (intel_crtc->active)
- intel_crtc->atomic.evade =
- intel_pipe_update_start(intel_crtc,
- &intel_crtc->atomic.start_vbl_count);
+ if (crtc->state->active)
+ intel_pipe_update_start(intel_crtc);
+
+ if (!needs_modeset(crtc->state) && INTEL_INFO(dev)->gen >= 9)
+ skl_detach_scalers(intel_crtc);
}
-static void intel_finish_crtc_commit(struct drm_crtc *crtc)
+static void intel_finish_crtc_commit(struct drm_crtc *crtc,
+ struct drm_crtc_state *old_crtc_state)
{
- struct drm_device *dev = crtc->dev;
- struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
- struct drm_plane *p;
-
- if (intel_crtc->atomic.evade)
- intel_pipe_update_end(intel_crtc,
- intel_crtc->atomic.start_vbl_count);
-
- intel_runtime_pm_put(dev_priv);
-
- if (intel_crtc->atomic.wait_vblank)
- intel_wait_for_vblank(dev, intel_crtc->pipe);
-
- intel_frontbuffer_flip(dev, intel_crtc->atomic.fb_bits);
-
- if (intel_crtc->atomic.update_fbc) {
- mutex_lock(&dev->struct_mutex);
- intel_fbc_update(dev);
- mutex_unlock(&dev->struct_mutex);
- }
- if (intel_crtc->atomic.post_enable_primary)
- intel_post_enable_primary(crtc);
-
- drm_for_each_legacy_plane(p, &dev->mode_config.plane_list)
- if (intel_crtc->atomic.update_sprite_watermarks & drm_plane_index(p))
- intel_update_sprite_watermarks(p, crtc, 0, 0, 0,
- false, false);
-
- memset(&intel_crtc->atomic, 0, sizeof(intel_crtc->atomic));
+ if (crtc->state->active)
+ intel_pipe_update_end(intel_crtc);
}
/**
struct intel_plane *primary;
struct intel_plane_state *state;
const uint32_t *intel_primary_formats;
- int num_formats;
+ unsigned int num_formats;
primary = kzalloc(sizeof(*primary), GFP_KERNEL);
if (primary == NULL)
}
primary->pipe = pipe;
primary->plane = pipe;
+ primary->frontbuffer_bit = INTEL_FRONTBUFFER_PRIMARY(pipe);
primary->check_plane = intel_check_primary_plane;
primary->commit_plane = intel_commit_primary_plane;
primary->disable_plane = intel_disable_primary_plane;
- primary->ckey.flags = I915_SET_COLORKEY_NONE;
if (HAS_FBC(dev) && INTEL_INFO(dev)->gen < 4)
primary->plane = !pipe;
static int
intel_check_cursor_plane(struct drm_plane *plane,
+ struct intel_crtc_state *crtc_state,
struct intel_plane_state *state)
{
- struct drm_crtc *crtc = state->base.crtc;
- struct drm_device *dev = plane->dev;
+ struct drm_crtc *crtc = crtc_state->base.crtc;
struct drm_framebuffer *fb = state->base.fb;
- struct drm_rect *dest = &state->dst;
- struct drm_rect *src = &state->src;
- const struct drm_rect *clip = &state->clip;
struct drm_i915_gem_object *obj = intel_fb_obj(fb);
- struct intel_crtc *intel_crtc;
unsigned stride;
int ret;
- crtc = crtc ? crtc : plane->crtc;
- intel_crtc = to_intel_crtc(crtc);
-
- ret = drm_plane_helper_check_update(plane, crtc, fb,
- src, dest, clip,
+ ret = drm_plane_helper_check_update(plane, crtc, fb, &state->src,
+ &state->dst, &state->clip,
DRM_PLANE_HELPER_NO_SCALING,
DRM_PLANE_HELPER_NO_SCALING,
true, true, &state->visible);
if (ret)
return ret;
-
/* if we want to turn off the cursor ignore width and height */
if (!obj)
- goto finish;
+ return 0;
/* Check for which cursor types we support */
- if (!cursor_size_ok(dev, state->base.crtc_w, state->base.crtc_h)) {
+ if (!cursor_size_ok(plane->dev, state->base.crtc_w, state->base.crtc_h)) {
DRM_DEBUG("Cursor dimension %dx%d not supported\n",
state->base.crtc_w, state->base.crtc_h);
return -EINVAL;
if (fb->modifier[0] != DRM_FORMAT_MOD_NONE) {
DRM_DEBUG_KMS("cursor cannot be tiled\n");
- ret = -EINVAL;
- }
-
-finish:
- if (intel_crtc->active) {
- if (plane->state->crtc_w != state->base.crtc_w)
- intel_crtc->atomic.update_wm = true;
-
- intel_crtc->atomic.fb_bits |=
- INTEL_FRONTBUFFER_CURSOR(intel_crtc->pipe);
+ return -EINVAL;
}
- return ret;
+ return 0;
}
static void
intel_disable_cursor_plane(struct drm_plane *plane,
- struct drm_crtc *crtc,
- bool force)
+ struct drm_crtc *crtc)
{
- struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
-
- if (!force) {
- plane->fb = NULL;
- intel_crtc->cursor_bo = NULL;
- intel_crtc->cursor_addr = 0;
- }
-
intel_crtc_update_cursor(crtc, false);
}
crtc = crtc ? crtc : plane->crtc;
intel_crtc = to_intel_crtc(crtc);
- plane->fb = state->base.fb;
- crtc->cursor_x = state->base.crtc_x;
- crtc->cursor_y = state->base.crtc_y;
-
if (intel_crtc->cursor_bo == obj)
goto update;
intel_crtc->cursor_addr = addr;
intel_crtc->cursor_bo = obj;
-update:
- if (intel_crtc->active)
+update:
+ if (crtc->state->active)
intel_crtc_update_cursor(crtc, state->visible);
}
cursor->max_downscale = 1;
cursor->pipe = pipe;
cursor->plane = pipe;
+ cursor->frontbuffer_bit = INTEL_FRONTBUFFER_CURSOR(pipe);
cursor->check_plane = intel_check_cursor_plane;
cursor->commit_plane = intel_commit_cursor_plane;
cursor->disable_plane = intel_disable_cursor_plane;
for (i = 0; i < intel_crtc->num_scalers; i++) {
intel_scaler = &scaler_state->scalers[i];
intel_scaler->in_use = 0;
- intel_scaler->id = i;
-
intel_scaler->mode = PS_SCALER_MODE_DYN;
}
intel_crtc->cursor_cntl = ~0;
intel_crtc->cursor_size = ~0;
+ intel_crtc->wm.cxsr_allowed = true;
+
BUG_ON(pipe >= ARRAY_SIZE(dev_priv->plane_to_crtc_mapping) ||
dev_priv->plane_to_crtc_mapping[intel_crtc->plane] != NULL);
dev_priv->plane_to_crtc_mapping[intel_crtc->plane] = &intel_crtc->base;
*/
found = I915_READ(DDI_BUF_CTL_A) & DDI_INIT_DISPLAY_DETECTED;
/* WaIgnoreDDIAStrap: skl */
- if (found ||
- (IS_SKYLAKE(dev) && INTEL_REVID(dev) < SKL_REVID_D0))
+ if (found || IS_SKYLAKE(dev))
intel_ddi_init(dev, PORT_A);
/* DDI B, C and D detection is indicated by the SFUSE_STRAP
intel_ddi_init(dev, PORT_C);
if (found & SFUSE_STRAP_DDID_DETECTED)
intel_ddi_init(dev, PORT_D);
+ /*
+ * On SKL we don't have a way to detect DDI-E so we rely on VBT.
+ */
+ if (IS_SKYLAKE(dev) &&
+ (dev_priv->vbt.ddi_port_info[PORT_E].supports_dp ||
+ dev_priv->vbt.ddi_port_info[PORT_E].supports_dvi ||
+ dev_priv->vbt.ddi_port_info[PORT_E].supports_hdmi))
+ intel_ddi_init(dev, PORT_E);
+
} else if (HAS_PCH_SPLIT(dev)) {
int found;
dpd_is_edp = intel_dp_is_edp(dev, PORT_D);
}
intel_dsi_init(dev);
- } else if (SUPPORTS_DIGITAL_OUTPUTS(dev)) {
+ } else if (!IS_GEN2(dev) && !IS_PINEVIEW(dev)) {
bool found = false;
if (I915_READ(GEN3_SDVOB) & SDVO_DETECTED) {
DRM_DEBUG_KMS("probing SDVOB\n");
found = intel_sdvo_init(dev, GEN3_SDVOB, true);
- if (!found && SUPPORTS_INTEGRATED_HDMI(dev)) {
+ if (!found && IS_G4X(dev)) {
DRM_DEBUG_KMS("probing HDMI on SDVOB\n");
intel_hdmi_init(dev, GEN4_HDMIB, PORT_B);
}
- if (!found && SUPPORTS_INTEGRATED_DP(dev))
+ if (!found && IS_G4X(dev))
intel_dp_init(dev, DP_B, PORT_B);
}
if (!found && (I915_READ(GEN3_SDVOC) & SDVO_DETECTED)) {
- if (SUPPORTS_INTEGRATED_HDMI(dev)) {
+ if (IS_G4X(dev)) {
DRM_DEBUG_KMS("probing HDMI on SDVOC\n");
intel_hdmi_init(dev, GEN4_HDMIC, PORT_C);
}
- if (SUPPORTS_INTEGRATED_DP(dev))
+ if (IS_G4X(dev))
intel_dp_init(dev, DP_C, PORT_C);
}
- if (SUPPORTS_INTEGRATED_DP(dev) &&
+ if (IS_G4X(dev) &&
(I915_READ(DP_D) & DP_DETECTED))
intel_dp_init(dev, DP_D, PORT_D);
} else if (IS_GEN2(dev))
return drm_gem_handle_create(file, &obj->base, handle);
}
+static int intel_user_framebuffer_dirty(struct drm_framebuffer *fb,
+ struct drm_file *file,
+ unsigned flags, unsigned color,
+ struct drm_clip_rect *clips,
+ unsigned num_clips)
+{
+ struct drm_device *dev = fb->dev;
+ struct intel_framebuffer *intel_fb = to_intel_framebuffer(fb);
+ struct drm_i915_gem_object *obj = intel_fb->obj;
+
+ mutex_lock(&dev->struct_mutex);
+ intel_fb_obj_flush(obj, false, ORIGIN_DIRTYFB);
+ mutex_unlock(&dev->struct_mutex);
+
+ return 0;
+}
+
static const struct drm_framebuffer_funcs intel_fb_funcs = {
.destroy = intel_user_framebuffer_destroy,
.create_handle = intel_user_framebuffer_create_handle,
+ .dirty = intel_user_framebuffer_dirty,
};
static
return intel_framebuffer_create(dev, mode_cmd, obj);
}
-#ifndef CONFIG_DRM_I915_FBDEV
+#ifndef CONFIG_DRM_FBDEV_EMULATION
static inline void intel_fbdev_output_poll_changed(struct drm_device *dev)
{
}
.output_poll_changed = intel_fbdev_output_poll_changed,
.atomic_check = intel_atomic_check,
.atomic_commit = intel_atomic_commit,
+ .atomic_state_alloc = intel_atomic_state_alloc,
+ .atomic_state_clear = intel_atomic_state_clear,
};
/* Set up chip specific display functions */
haswell_crtc_compute_clock;
dev_priv->display.crtc_enable = haswell_crtc_enable;
dev_priv->display.crtc_disable = haswell_crtc_disable;
- dev_priv->display.off = ironlake_crtc_off;
dev_priv->display.update_primary_plane =
skylake_update_primary_plane;
} else if (HAS_DDI(dev)) {
haswell_crtc_compute_clock;
dev_priv->display.crtc_enable = haswell_crtc_enable;
dev_priv->display.crtc_disable = haswell_crtc_disable;
- dev_priv->display.off = ironlake_crtc_off;
dev_priv->display.update_primary_plane =
ironlake_update_primary_plane;
} else if (HAS_PCH_SPLIT(dev)) {
ironlake_crtc_compute_clock;
dev_priv->display.crtc_enable = ironlake_crtc_enable;
dev_priv->display.crtc_disable = ironlake_crtc_disable;
- dev_priv->display.off = ironlake_crtc_off;
dev_priv->display.update_primary_plane =
ironlake_update_primary_plane;
} else if (IS_VALLEYVIEW(dev)) {
dev_priv->display.crtc_compute_clock = i9xx_crtc_compute_clock;
dev_priv->display.crtc_enable = valleyview_crtc_enable;
dev_priv->display.crtc_disable = i9xx_crtc_disable;
- dev_priv->display.off = i9xx_crtc_off;
dev_priv->display.update_primary_plane =
i9xx_update_primary_plane;
} else {
dev_priv->display.crtc_compute_clock = i9xx_crtc_compute_clock;
dev_priv->display.crtc_enable = i9xx_crtc_enable;
dev_priv->display.crtc_disable = i9xx_crtc_disable;
- dev_priv->display.off = i9xx_crtc_off;
dev_priv->display.update_primary_plane =
i9xx_update_primary_plane;
}
if (IS_SKYLAKE(dev))
dev_priv->display.get_display_clock_speed =
skylake_get_display_clock_speed;
+ else if (IS_BROXTON(dev))
+ dev_priv->display.get_display_clock_speed =
+ broxton_get_display_clock_speed;
else if (IS_BROADWELL(dev))
dev_priv->display.get_display_clock_speed =
broadwell_get_display_clock_speed;
dev_priv->display.get_display_clock_speed =
ilk_get_display_clock_speed;
else if (IS_I945G(dev) || IS_BROADWATER(dev) ||
- IS_GEN6(dev) || IS_IVYBRIDGE(dev) || (IS_G33(dev) && !IS_PINEVIEW_M(dev)))
+ IS_GEN6(dev) || IS_IVYBRIDGE(dev))
dev_priv->display.get_display_clock_speed =
i945_get_display_clock_speed;
+ else if (IS_GM45(dev))
+ dev_priv->display.get_display_clock_speed =
+ gm45_get_display_clock_speed;
+ else if (IS_CRESTLINE(dev))
+ dev_priv->display.get_display_clock_speed =
+ i965gm_get_display_clock_speed;
+ else if (IS_PINEVIEW(dev))
+ dev_priv->display.get_display_clock_speed =
+ pnv_get_display_clock_speed;
+ else if (IS_G33(dev) || IS_G4X(dev))
+ dev_priv->display.get_display_clock_speed =
+ g33_get_display_clock_speed;
else if (IS_I915G(dev))
dev_priv->display.get_display_clock_speed =
i915_get_display_clock_speed;
i865_get_display_clock_speed;
else if (IS_I85X(dev))
dev_priv->display.get_display_clock_speed =
- i855_get_display_clock_speed;
- else /* 852, 830 */
+ i85x_get_display_clock_speed;
+ else { /* 830 */
+ WARN(!IS_I830(dev), "Unknown platform. Assuming 133 MHz CDCLK\n");
dev_priv->display.get_display_clock_speed =
i830_get_display_clock_speed;
+ }
if (IS_GEN5(dev)) {
dev_priv->display.fdi_link_train = ironlake_fdi_link_train;
dev_priv->display.fdi_link_train = ivb_manual_fdi_link_train;
} else if (IS_HASWELL(dev) || IS_BROADWELL(dev)) {
dev_priv->display.fdi_link_train = hsw_fdi_link_train;
+ if (IS_BROADWELL(dev)) {
+ dev_priv->display.modeset_commit_cdclk =
+ broadwell_modeset_commit_cdclk;
+ dev_priv->display.modeset_calc_cdclk =
+ broadwell_modeset_calc_cdclk;
+ }
} else if (IS_VALLEYVIEW(dev)) {
- dev_priv->display.modeset_global_resources =
- valleyview_modeset_global_resources;
+ dev_priv->display.modeset_commit_cdclk =
+ valleyview_modeset_commit_cdclk;
+ dev_priv->display.modeset_calc_cdclk =
+ valleyview_modeset_calc_cdclk;
} else if (IS_BROXTON(dev)) {
- dev_priv->display.modeset_global_resources =
- broxton_modeset_global_resources;
+ dev_priv->display.modeset_commit_cdclk =
+ broxton_modeset_commit_cdclk;
+ dev_priv->display.modeset_calc_cdclk =
+ broxton_modeset_calc_cdclk;
}
switch (INTEL_INFO(dev)->gen) {
void intel_modeset_init_hw(struct drm_device *dev)
{
+ intel_update_cdclk(dev);
intel_prepare_ddi(dev);
-
- if (IS_VALLEYVIEW(dev))
- vlv_update_cdclk(dev);
-
intel_init_clock_gating(dev);
-
intel_enable_gt_powersave(dev);
}
if (INTEL_INFO(dev)->num_pipes == 0)
return;
+ /*
+ * There may be no VBT; and if the BIOS enabled SSC we can
+ * just keep using it to avoid unnecessary flicker. Whereas if the
+ * BIOS isn't using it, don't assume it will work even if the VBT
+ * indicates as much.
+ */
+ if (HAS_PCH_IBX(dev) || HAS_PCH_CPT(dev)) {
+ bool bios_lvds_use_ssc = !!(I915_READ(PCH_DREF_CONTROL) &
+ DREF_SSC1_ENABLE);
+
+ if (dev_priv->vbt.lvds_use_ssc != bios_lvds_use_ssc) {
+ DRM_DEBUG_KMS("SSC %sabled by BIOS, overriding VBT which says %sabled\n",
+ bios_lvds_use_ssc ? "en" : "dis",
+ dev_priv->vbt.lvds_use_ssc ? "en" : "dis");
+ dev_priv->vbt.lvds_use_ssc = bios_lvds_use_ssc;
+ }
+ }
+
intel_init_display(dev);
intel_init_audio(dev);
}
}
- intel_init_dpio(dev);
-
intel_shared_dpll_init(dev);
/* Just disable it once at startup */
intel_setup_outputs(dev);
/* Just in case the BIOS is doing something questionable. */
- intel_fbc_disable(dev);
+ intel_fbc_disable(dev_priv);
drm_modeset_lock_all(dev);
- intel_modeset_setup_hw_state(dev, false);
+ intel_modeset_setup_hw_state(dev);
drm_modeset_unlock_all(dev);
for_each_intel_crtc(dev, crtc) {
+ struct intel_initial_plane_config plane_config = {};
+
if (!crtc->active)
continue;
* can even allow for smooth boot transitions if the BIOS
* fb is large enough for the active pipe configuration.
*/
- if (dev_priv->display.get_initial_plane_config) {
- dev_priv->display.get_initial_plane_config(crtc,
- &crtc->plane_config);
- /*
- * If the fb is shared between multiple heads, we'll
- * just get the first one.
- */
- intel_find_initial_plane_obj(crtc, &crtc->plane_config);
- }
+ dev_priv->display.get_initial_plane_config(crtc,
+ &plane_config);
+
+ /*
+ * If the fb is shared between multiple heads, we'll
+ * just get the first one.
+ */
+ intel_find_initial_plane_obj(crtc, &plane_config);
}
}
return true;
}
+static bool intel_crtc_has_encoders(struct intel_crtc *crtc)
+{
+ struct drm_device *dev = crtc->base.dev;
+ struct intel_encoder *encoder;
+
+ for_each_encoder_on_crtc(dev, &crtc->base, encoder)
+ return true;
+
+ return false;
+}
+
static void intel_sanitize_crtc(struct intel_crtc *crtc)
{
struct drm_device *dev = crtc->base.dev;
/* restore vblank interrupts to correct state */
drm_crtc_vblank_reset(&crtc->base);
if (crtc->active) {
+ drm_calc_timestamping_constants(&crtc->base, &crtc->base.hwmode);
update_scanline_offset(crtc);
drm_crtc_vblank_on(&crtc->base);
}
* disable the crtc (and hence change the state) if it is wrong. Note
* that gen4+ has a fixed plane -> pipe mapping. */
if (INTEL_INFO(dev)->gen < 4 && !intel_check_plane_mapping(crtc)) {
- struct intel_connector *connector;
bool plane;
DRM_DEBUG_KMS("[CRTC:%d] wrong plane connection detected!\n",
plane = crtc->plane;
to_intel_plane_state(crtc->base.primary->state)->visible = true;
crtc->plane = !plane;
- intel_crtc_disable_planes(&crtc->base);
- dev_priv->display.crtc_disable(&crtc->base);
+ intel_crtc_disable_noatomic(&crtc->base);
crtc->plane = plane;
-
- /* ... and break all links. */
- for_each_intel_connector(dev, connector) {
- if (connector->encoder->base.crtc != &crtc->base)
- continue;
-
- connector->base.dpms = DRM_MODE_DPMS_OFF;
- connector->base.encoder = NULL;
- }
- /* multiple connectors may have the same encoder:
- * handle them and break crtc link separately */
- for_each_intel_connector(dev, connector)
- if (connector->encoder->base.crtc == &crtc->base) {
- connector->encoder->base.crtc = NULL;
- connector->encoder->connectors_active = false;
- }
-
- WARN_ON(crtc->active);
- crtc->base.state->enable = false;
- crtc->base.state->active = false;
- crtc->base.enabled = false;
}
if (dev_priv->quirks & QUIRK_PIPEA_FORCE &&
/* Adjust the state of the output pipe according to whether we
* have active connectors/encoders. */
- intel_crtc_update_dpms(&crtc->base);
+ if (!intel_crtc_has_encoders(crtc))
+ intel_crtc_disable_noatomic(&crtc->base);
- if (crtc->active != crtc->base.state->enable) {
+ if (crtc->active != crtc->base.state->active) {
struct intel_encoder *encoder;
/* This can happen either due to bugs in the get_hw_state
- * functions or because the pipe is force-enabled due to the
+ * functions or because of calls to intel_crtc_disable_noatomic,
+ * or because the pipe is force-enabled due to the
* pipe A quirk. */
DRM_DEBUG_KMS("[CRTC:%d] hw state adjusted, was %s, now %s\n",
crtc->base.base.id,
crtc->base.state->enable ? "enabled" : "disabled",
crtc->active ? "enabled" : "disabled");
- crtc->base.state->enable = crtc->active;
+ WARN_ON(drm_atomic_set_mode_for_crtc(crtc->base.state, NULL) < 0);
crtc->base.state->active = crtc->active;
crtc->base.enabled = crtc->active;
* actually up, hence no need to break them. */
WARN_ON(crtc->active);
- for_each_encoder_on_crtc(dev, &crtc->base, encoder) {
- WARN_ON(encoder->connectors_active);
+ for_each_encoder_on_crtc(dev, &crtc->base, encoder)
encoder->base.crtc = NULL;
- }
}
if (crtc->active || HAS_GMCH_DISPLAY(dev)) {
{
struct intel_connector *connector;
struct drm_device *dev = encoder->base.dev;
+ bool active = false;
/* We need to check both for a crtc link (meaning that the
* encoder is active and trying to read from a pipe) and the
bool has_active_crtc = encoder->base.crtc &&
to_intel_crtc(encoder->base.crtc)->active;
- if (encoder->connectors_active && !has_active_crtc) {
+ for_each_intel_connector(dev, connector) {
+ if (connector->base.encoder != &encoder->base)
+ continue;
+
+ active = true;
+ break;
+ }
+
+ if (active && !has_active_crtc) {
DRM_DEBUG_KMS("[ENCODER:%d:%s] has active connectors but no active pipe!\n",
encoder->base.base.id,
encoder->base.name);
encoder->post_disable(encoder);
}
encoder->base.crtc = NULL;
- encoder->connectors_active = false;
/* Inconsistent output/port/pipe state happens presumably due to
* a bug in one of the get_hw_state functions. Or someplace else
{
struct drm_i915_private *dev_priv = crtc->base.dev->dev_private;
- if (!crtc->active)
- return false;
+ return !!(I915_READ(DSPCNTR(crtc->plane)) & DISPLAY_PLANE_ENABLE);
+}
+
+static void readout_plane_state(struct intel_crtc *crtc,
+ struct intel_crtc_state *crtc_state)
+{
+ struct intel_plane *p;
+ struct intel_plane_state *plane_state;
+ bool active = crtc_state->base.active;
+
+ for_each_intel_plane(crtc->base.dev, p) {
+ if (crtc->pipe != p->pipe)
+ continue;
+
+ plane_state = to_intel_plane_state(p->base.state);
- return I915_READ(DSPCNTR(crtc->plane)) & DISPLAY_PLANE_ENABLE;
+ if (p->base.type == DRM_PLANE_TYPE_PRIMARY) {
+ plane_state->visible = primary_get_hw_state(crtc);
+ if (plane_state->visible)
+ crtc->base.state->plane_mask |=
+ 1 << drm_plane_index(&p->base);
+ } else {
+ if (active)
+ p->disable_plane(&p->base, &crtc->base);
+
+ plane_state->visible = false;
+ }
+ }
}
static void intel_modeset_readout_hw_state(struct drm_device *dev)
int i;
for_each_intel_crtc(dev, crtc) {
- struct drm_plane *primary = crtc->base.primary;
- struct intel_plane_state *plane_state;
-
+ __drm_atomic_helper_crtc_destroy_state(&crtc->base, crtc->base.state);
memset(crtc->config, 0, sizeof(*crtc->config));
crtc->config->base.crtc = &crtc->base;
- crtc->config->quirks |= PIPE_CONFIG_QUIRK_INHERITED_MODE;
-
crtc->active = dev_priv->display.get_pipe_config(crtc,
crtc->config);
- crtc->base.state->enable = crtc->active;
crtc->base.state->active = crtc->active;
crtc->base.enabled = crtc->active;
- plane_state = to_intel_plane_state(primary->state);
- plane_state->visible = primary_get_hw_state(crtc);
+ memset(&crtc->base.mode, 0, sizeof(crtc->base.mode));
+ if (crtc->base.state->active) {
+ intel_mode_from_pipe_config(&crtc->base.mode, crtc->config);
+ intel_mode_from_pipe_config(&crtc->base.state->adjusted_mode, crtc->config);
+ WARN_ON(drm_atomic_set_mode_for_crtc(crtc->base.state, &crtc->base.mode));
+
+ /*
+ * The initial mode needs to be set in order to keep
+ * the atomic core happy. It wants a valid mode if the
+ * crtc's enabled, so we do the above call.
+ *
+ * At this point some state updated by the connectors
+ * in their ->detect() callback has not run yet, so
+ * no recalculation can be done yet.
+ *
+ * Even if we could do a recalculation and modeset
+ * right now it would cause a double modeset if
+ * fbdev or userspace chooses a different initial mode.
+ *
+ * If that happens, someone indicated they wanted a
+ * mode change, which means it's safe to do a full
+ * recalculation.
+ */
+ crtc->base.state->mode.private_flags = I915_MODE_FLAG_INHERITED;
+ }
+
+ crtc->base.hwmode = crtc->config->base.adjusted_mode;
+ readout_plane_state(crtc, to_intel_crtc_state(crtc->base.state));
DRM_DEBUG_KMS("[CRTC:%d] hw state readout: %s\n",
crtc->base.base.id,
encoder->base.crtc = NULL;
}
- encoder->connectors_active = false;
DRM_DEBUG_KMS("[ENCODER:%d:%s] hw state readout: %s, pipe %c\n",
encoder->base.base.id,
encoder->base.name,
for_each_intel_connector(dev, connector) {
if (connector->get_hw_state(connector)) {
connector->base.dpms = DRM_MODE_DPMS_ON;
- connector->encoder->connectors_active = true;
connector->base.encoder = &connector->encoder->base;
} else {
connector->base.dpms = DRM_MODE_DPMS_OFF;
}
}
-/* Scan out the current hw modeset state, sanitizes it and maps it into the drm
- * and i915 state tracking structures. */
-void intel_modeset_setup_hw_state(struct drm_device *dev,
- bool force_restore)
+/* Scan out the current hw modeset state,
+ * and sanitizes it to the current state
+ */
+static void
+intel_modeset_setup_hw_state(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
enum pipe pipe;
intel_modeset_readout_hw_state(dev);
- /*
- * Now that we have the config, copy it to each CRTC struct
- * Note that this could go away if we move to using crtc_config
- * checking everywhere.
- */
- for_each_intel_crtc(dev, crtc) {
- if (crtc->active && i915.fastboot) {
- intel_mode_from_pipe_config(&crtc->base.mode,
- crtc->config);
- DRM_DEBUG_KMS("[CRTC:%d] found active mode: ",
- crtc->base.base.id);
- drm_mode_debug_printmodeline(&crtc->base.mode);
- }
- }
-
/* HW state is read out, now we need to sanitize this mess. */
for_each_intel_encoder(dev, encoder) {
intel_sanitize_encoder(encoder);
pll->on = false;
}
- if (IS_GEN9(dev))
+ if (IS_VALLEYVIEW(dev))
+ vlv_wm_get_hw_state(dev);
+ else if (IS_GEN9(dev))
skl_wm_get_hw_state(dev);
else if (HAS_PCH_SPLIT(dev))
ilk_wm_get_hw_state(dev);
- if (force_restore) {
- i915_redisable_vga(dev);
+ for_each_intel_crtc(dev, crtc) {
+ unsigned long put_domains;
- /*
- * We need to use raw interfaces for restoring state to avoid
- * checking (bogus) intermediate states.
- */
- for_each_pipe(dev_priv, pipe) {
- struct drm_crtc *crtc =
- dev_priv->pipe_to_crtc_mapping[pipe];
+ put_domains = modeset_get_crtc_power_domains(&crtc->base);
+ if (WARN_ON(put_domains))
+ modeset_put_power_domains(dev_priv, put_domains);
+ }
+ intel_display_set_init_power(dev_priv, false);
+}
- intel_crtc_restore_mode(crtc);
- }
- } else {
- intel_modeset_update_staged_output_state(dev);
+void intel_display_resume(struct drm_device *dev)
+{
+ struct drm_atomic_state *state = drm_atomic_state_alloc(dev);
+ struct intel_connector *conn;
+ struct intel_plane *plane;
+ struct drm_crtc *crtc;
+ int ret;
+
+ if (!state)
+ return;
+
+ state->acquire_ctx = dev->mode_config.acquire_ctx;
+
+ /* preserve complete old state, including dpll */
+ intel_atomic_get_shared_dpll_state(state);
+
+ for_each_crtc(dev, crtc) {
+ struct drm_crtc_state *crtc_state =
+ drm_atomic_get_crtc_state(state, crtc);
+
+ ret = PTR_ERR_OR_ZERO(crtc_state);
+ if (ret)
+ goto err;
+
+ /* force a restore */
+ crtc_state->mode_changed = true;
+ }
+
+ for_each_intel_plane(dev, plane) {
+ ret = PTR_ERR_OR_ZERO(drm_atomic_get_plane_state(state, &plane->base));
+ if (ret)
+ goto err;
+ }
+
+ for_each_intel_connector(dev, conn) {
+ ret = PTR_ERR_OR_ZERO(drm_atomic_get_connector_state(state, &conn->base));
+ if (ret)
+ goto err;
}
- intel_modeset_check_state(dev);
+ intel_modeset_setup_hw_state(dev);
+
+ i915_redisable_vga(dev);
+ ret = drm_atomic_commit(state);
+ if (!ret)
+ return;
+
+err:
+ DRM_ERROR("Restoring old state failed with %i\n", ret);
+ drm_atomic_state_free(state);
}
void intel_modeset_gem_init(struct drm_device *dev)
{
- struct drm_i915_private *dev_priv = dev->dev_private;
struct drm_crtc *c;
struct drm_i915_gem_object *obj;
int ret;
intel_init_gt_powersave(dev);
mutex_unlock(&dev->struct_mutex);
- /*
- * There may be no VBT; and if the BIOS enabled SSC we can
- * just keep using it to avoid unnecessary flicker. Whereas if the
- * BIOS isn't using it, don't assume it will work even if the VBT
- * indicates as much.
- */
- if (HAS_PCH_IBX(dev) || HAS_PCH_CPT(dev))
- dev_priv->vbt.lvds_use_ssc = !!(I915_READ(PCH_DREF_CONTROL) &
- DREF_SSC1_ENABLE);
-
intel_modeset_init_hw(dev);
intel_setup_overlay(dev);
ret = intel_pin_and_fence_fb_obj(c->primary,
c->primary->fb,
c->primary->state,
- NULL);
+ NULL, NULL);
mutex_unlock(&dev->struct_mutex);
if (ret) {
DRM_ERROR("failed to pin boot fb on pipe %d\n",
to_intel_crtc(c)->pipe);
drm_framebuffer_unreference(c->primary->fb);
c->primary->fb = NULL;
+ c->primary->crtc = c->primary->state->crtc = NULL;
update_state_fb(c->primary);
+ c->state->plane_mask &= ~(1 << drm_plane_index(c->primary));
}
}
*/
drm_kms_helper_poll_fini(dev);
- mutex_lock(&dev->struct_mutex);
-
intel_unregister_dsm_handler();
- intel_fbc_disable(dev);
-
- mutex_unlock(&dev->struct_mutex);
+ intel_fbc_disable(dev_priv);
/* flush any delayed tasks or pending work */
flush_scheduled_work();
projects / cascardo / linux.git / blobdiff