bool intel_display_power_well_is_enabled(struct drm_i915_private *dev_priv,
int power_well_id);
+static struct i915_power_well *
+lookup_power_well(struct drm_i915_private *dev_priv, int power_well_id);
+
const char *
intel_display_power_domain_str(enum intel_display_power_domain domain)
{
return "TRANSCODER_C";
case POWER_DOMAIN_TRANSCODER_EDP:
return "TRANSCODER_EDP";
+ case POWER_DOMAIN_TRANSCODER_DSI_A:
+ return "TRANSCODER_DSI_A";
+ case POWER_DOMAIN_TRANSCODER_DSI_C:
+ return "TRANSCODER_DSI_C";
case POWER_DOMAIN_PORT_DDI_A_LANES:
return "PORT_DDI_A_LANES";
case POWER_DOMAIN_PORT_DDI_B_LANES:
power_well->ops->disable(dev_priv, power_well);
}
+static void intel_power_well_get(struct drm_i915_private *dev_priv,
+ struct i915_power_well *power_well)
+{
+ if (!power_well->count++)
+ intel_power_well_enable(dev_priv, power_well);
+}
+
+static void intel_power_well_put(struct drm_i915_private *dev_priv,
+ struct i915_power_well *power_well)
+{
+ WARN(!power_well->count, "Use count on power well %s is already zero",
+ power_well->name);
+
+ if (!--power_well->count)
+ intel_power_well_disable(dev_priv, power_well);
+}
+
/*
* We should only use the power well if we explicitly asked the hardware to
* enable it, so check if it's enabled and also check if we've requested it to
*/
static void hsw_power_well_post_enable(struct drm_i915_private *dev_priv)
{
- struct drm_device *dev = dev_priv->dev;
+ struct drm_device *dev = &dev_priv->drm;
/*
* After we re-enable the power well, if we touch VGA register 0x3d5
static void skl_power_well_post_enable(struct drm_i915_private *dev_priv,
struct i915_power_well *power_well)
{
- struct drm_device *dev = dev_priv->dev;
+ struct drm_device *dev = &dev_priv->drm;
/*
* After we re-enable the power well, if we touch VGA register 0x3d5
if (!is_enabled) {
DRM_DEBUG_KMS("Enabling power well\n");
- if (wait_for((I915_READ(HSW_PWR_WELL_DRIVER) &
- HSW_PWR_WELL_STATE_ENABLED), 20))
+ if (intel_wait_for_register(dev_priv,
+ HSW_PWR_WELL_DRIVER,
+ HSW_PWR_WELL_STATE_ENABLED,
+ HSW_PWR_WELL_STATE_ENABLED,
+ 20))
DRM_ERROR("Timeout enabling power well\n");
hsw_power_well_post_enable(dev_priv);
}
BIT(POWER_DOMAIN_MODESET) | \
BIT(POWER_DOMAIN_AUX_A) | \
BIT(POWER_DOMAIN_INIT))
-#define SKL_DISPLAY_ALWAYS_ON_POWER_DOMAINS ( \
- (POWER_DOMAIN_MASK & ~( \
- SKL_DISPLAY_POWERWELL_2_POWER_DOMAINS | \
- SKL_DISPLAY_DC_OFF_POWER_DOMAINS)) | \
- BIT(POWER_DOMAIN_INIT))
#define BXT_DISPLAY_POWERWELL_2_POWER_DOMAINS ( \
BIT(POWER_DOMAIN_TRANSCODER_A) | \
BIT(POWER_DOMAIN_VGA) | \
BIT(POWER_DOMAIN_GMBUS) | \
BIT(POWER_DOMAIN_INIT))
-#define BXT_DISPLAY_POWERWELL_1_POWER_DOMAINS ( \
- BXT_DISPLAY_POWERWELL_2_POWER_DOMAINS | \
- BIT(POWER_DOMAIN_PIPE_A) | \
- BIT(POWER_DOMAIN_TRANSCODER_EDP) | \
- BIT(POWER_DOMAIN_PIPE_A_PANEL_FITTER) | \
- BIT(POWER_DOMAIN_PORT_DDI_A_LANES) | \
- BIT(POWER_DOMAIN_AUX_A) | \
- BIT(POWER_DOMAIN_PLLS) | \
- BIT(POWER_DOMAIN_INIT))
#define BXT_DISPLAY_DC_OFF_POWER_DOMAINS ( \
BXT_DISPLAY_POWERWELL_2_POWER_DOMAINS | \
BIT(POWER_DOMAIN_MODESET) | \
BIT(POWER_DOMAIN_AUX_A) | \
BIT(POWER_DOMAIN_INIT))
-#define BXT_DISPLAY_ALWAYS_ON_POWER_DOMAINS ( \
- (POWER_DOMAIN_MASK & ~(BXT_DISPLAY_POWERWELL_1_POWER_DOMAINS | \
- BXT_DISPLAY_POWERWELL_2_POWER_DOMAINS)) | \
+#define BXT_DPIO_CMN_A_POWER_DOMAINS ( \
+ BIT(POWER_DOMAIN_PORT_DDI_A_LANES) | \
+ BIT(POWER_DOMAIN_AUX_A) | \
+ BIT(POWER_DOMAIN_INIT))
+#define BXT_DPIO_CMN_BC_POWER_DOMAINS ( \
+ BIT(POWER_DOMAIN_PORT_DDI_B_LANES) | \
+ BIT(POWER_DOMAIN_PORT_DDI_C_LANES) | \
+ BIT(POWER_DOMAIN_AUX_B) | \
+ BIT(POWER_DOMAIN_AUX_C) | \
BIT(POWER_DOMAIN_INIT))
static void assert_can_enable_dc9(struct drm_i915_private *dev_priv)
{
- struct drm_device *dev = dev_priv->dev;
-
- WARN(!IS_BROXTON(dev), "Platform doesn't support DC9.\n");
- WARN((I915_READ(DC_STATE_EN) & DC_STATE_EN_DC9),
- "DC9 already programmed to be enabled.\n");
- WARN(I915_READ(DC_STATE_EN) & DC_STATE_EN_UPTO_DC5,
- "DC5 still not disabled to enable DC9.\n");
- WARN(I915_READ(HSW_PWR_WELL_DRIVER), "Power well on.\n");
- WARN(intel_irqs_enabled(dev_priv), "Interrupts not disabled yet.\n");
+ WARN_ONCE((I915_READ(DC_STATE_EN) & DC_STATE_EN_DC9),
+ "DC9 already programmed to be enabled.\n");
+ WARN_ONCE(I915_READ(DC_STATE_EN) & DC_STATE_EN_UPTO_DC5,
+ "DC5 still not disabled to enable DC9.\n");
+ WARN_ONCE(I915_READ(HSW_PWR_WELL_DRIVER), "Power well on.\n");
+ WARN_ONCE(intel_irqs_enabled(dev_priv),
+ "Interrupts not disabled yet.\n");
/*
* TODO: check for the following to verify the conditions to enter DC9
static void assert_can_disable_dc9(struct drm_i915_private *dev_priv)
{
- WARN(intel_irqs_enabled(dev_priv), "Interrupts not disabled yet.\n");
- WARN(!(I915_READ(DC_STATE_EN) & DC_STATE_EN_DC9),
- "DC9 already programmed to be disabled.\n");
- WARN(I915_READ(DC_STATE_EN) & DC_STATE_EN_UPTO_DC5,
- "DC5 still not disabled.\n");
+ WARN_ONCE(intel_irqs_enabled(dev_priv),
+ "Interrupts not disabled yet.\n");
+ WARN_ONCE(I915_READ(DC_STATE_EN) & DC_STATE_EN_UPTO_DC5,
+ "DC5 still not disabled.\n");
/*
* TODO: check for the following to verify DC9 state was indeed
*/
}
-static void gen9_set_dc_state_debugmask(struct drm_i915_private *dev_priv)
-{
- uint32_t val, mask;
-
- mask = DC_STATE_DEBUG_MASK_MEMORY_UP;
-
- if (IS_BROXTON(dev_priv))
- mask |= DC_STATE_DEBUG_MASK_CORES;
-
- /* The below bit doesn't need to be cleared ever afterwards */
- val = I915_READ(DC_STATE_DEBUG);
- if ((val & mask) != mask) {
- val |= mask;
- I915_WRITE(DC_STATE_DEBUG, val);
- POSTING_READ(DC_STATE_DEBUG);
- }
-}
-
static void gen9_write_dc_state(struct drm_i915_private *dev_priv,
u32 state)
{
state, rewrites);
}
-static void gen9_set_dc_state(struct drm_i915_private *dev_priv, uint32_t state)
+static u32 gen9_dc_mask(struct drm_i915_private *dev_priv)
{
- uint32_t val;
- uint32_t mask;
+ u32 mask;
mask = DC_STATE_EN_UPTO_DC5;
if (IS_BROXTON(dev_priv))
else
mask |= DC_STATE_EN_UPTO_DC6;
- WARN_ON_ONCE(state & ~mask);
+ return mask;
+}
+
+void gen9_sanitize_dc_state(struct drm_i915_private *dev_priv)
+{
+ u32 val;
+
+ val = I915_READ(DC_STATE_EN) & gen9_dc_mask(dev_priv);
- if (i915.enable_dc == 0)
- state = DC_STATE_DISABLE;
- else if (i915.enable_dc == 1 && state > DC_STATE_EN_UPTO_DC5)
- state = DC_STATE_EN_UPTO_DC5;
+ DRM_DEBUG_KMS("Resetting DC state tracking from %02x to %02x\n",
+ dev_priv->csr.dc_state, val);
+ dev_priv->csr.dc_state = val;
+}
+
+static void gen9_set_dc_state(struct drm_i915_private *dev_priv, uint32_t state)
+{
+ uint32_t val;
+ uint32_t mask;
+
+ if (WARN_ON_ONCE(state & ~dev_priv->csr.allowed_dc_mask))
+ state &= dev_priv->csr.allowed_dc_mask;
val = I915_READ(DC_STATE_EN);
+ mask = gen9_dc_mask(dev_priv);
DRM_DEBUG_KMS("Setting DC state from %02x to %02x\n",
val & mask, state);
DRM_DEBUG_KMS("Enabling DC9\n");
+ intel_power_sequencer_reset(dev_priv);
gen9_set_dc_state(dev_priv, DC_STATE_EN_DC9);
}
static void assert_can_enable_dc5(struct drm_i915_private *dev_priv)
{
- struct drm_device *dev = dev_priv->dev;
bool pg2_enabled = intel_display_power_well_is_enabled(dev_priv,
SKL_DISP_PW_2);
- WARN_ONCE(!IS_SKYLAKE(dev) && !IS_KABYLAKE(dev),
- "Platform doesn't support DC5.\n");
- WARN_ONCE(!HAS_RUNTIME_PM(dev), "Runtime PM not enabled.\n");
WARN_ONCE(pg2_enabled, "PG2 not disabled to enable DC5.\n");
WARN_ONCE((I915_READ(DC_STATE_EN) & DC_STATE_EN_UPTO_DC5),
assert_csr_loaded(dev_priv);
}
-static void assert_can_disable_dc5(struct drm_i915_private *dev_priv)
-{
- /*
- * During initialization, the firmware may not be loaded yet.
- * We still want to make sure that the DC enabling flag is cleared.
- */
- if (dev_priv->power_domains.initializing)
- return;
-
- assert_rpm_wakelock_held(dev_priv);
-}
-
-static void gen9_enable_dc5(struct drm_i915_private *dev_priv)
+void gen9_enable_dc5(struct drm_i915_private *dev_priv)
{
assert_can_enable_dc5(dev_priv);
static void assert_can_enable_dc6(struct drm_i915_private *dev_priv)
{
- struct drm_device *dev = dev_priv->dev;
-
- WARN_ONCE(!IS_SKYLAKE(dev) && !IS_KABYLAKE(dev),
- "Platform doesn't support DC6.\n");
- WARN_ONCE(!HAS_RUNTIME_PM(dev), "Runtime PM not enabled.\n");
WARN_ONCE(I915_READ(UTIL_PIN_CTL) & UTIL_PIN_ENABLE,
"Backlight is not disabled.\n");
WARN_ONCE((I915_READ(DC_STATE_EN) & DC_STATE_EN_UPTO_DC6),
assert_csr_loaded(dev_priv);
}
-static void assert_can_disable_dc6(struct drm_i915_private *dev_priv)
+void skl_enable_dc6(struct drm_i915_private *dev_priv)
{
- /*
- * During initialization, the firmware may not be loaded yet.
- * We still want to make sure that the DC enabling flag is cleared.
- */
- if (dev_priv->power_domains.initializing)
- return;
+ assert_can_enable_dc6(dev_priv);
+
+ DRM_DEBUG_KMS("Enabling DC6\n");
+
+ gen9_set_dc_state(dev_priv, DC_STATE_EN_UPTO_DC6);
- WARN_ONCE(!(I915_READ(DC_STATE_EN) & DC_STATE_EN_UPTO_DC6),
- "DC6 already programmed to be disabled.\n");
}
-static void gen9_disable_dc5_dc6(struct drm_i915_private *dev_priv)
+void skl_disable_dc6(struct drm_i915_private *dev_priv)
{
- assert_can_disable_dc5(dev_priv);
-
- if ((IS_SKYLAKE(dev_priv) || IS_KABYLAKE(dev_priv)) &&
- i915.enable_dc != 0 && i915.enable_dc != 1)
- assert_can_disable_dc6(dev_priv);
+ DRM_DEBUG_KMS("Disabling DC6\n");
gen9_set_dc_state(dev_priv, DC_STATE_DISABLE);
}
-void skl_enable_dc6(struct drm_i915_private *dev_priv)
+static void
+gen9_sanitize_power_well_requests(struct drm_i915_private *dev_priv,
+ struct i915_power_well *power_well)
{
- assert_can_enable_dc6(dev_priv);
+ enum skl_disp_power_wells power_well_id = power_well->data;
+ u32 val;
+ u32 mask;
- DRM_DEBUG_KMS("Enabling DC6\n");
+ mask = SKL_POWER_WELL_REQ(power_well_id);
- gen9_set_dc_state(dev_priv, DC_STATE_EN_UPTO_DC6);
+ val = I915_READ(HSW_PWR_WELL_KVMR);
+ if (WARN_ONCE(val & mask, "Clearing unexpected KVMR request for %s\n",
+ power_well->name))
+ I915_WRITE(HSW_PWR_WELL_KVMR, val & ~mask);
-}
+ val = I915_READ(HSW_PWR_WELL_BIOS);
+ val |= I915_READ(HSW_PWR_WELL_DEBUG);
-void skl_disable_dc6(struct drm_i915_private *dev_priv)
-{
- assert_can_disable_dc6(dev_priv);
+ if (!(val & mask))
+ return;
- DRM_DEBUG_KMS("Disabling DC6\n");
+ /*
+ * DMC is known to force on the request bits for power well 1 on SKL
+ * and BXT and the misc IO power well on SKL but we don't expect any
+ * other request bits to be set, so WARN for those.
+ */
+ if (power_well_id == SKL_DISP_PW_1 ||
+ ((IS_SKYLAKE(dev_priv) || IS_KABYLAKE(dev_priv)) &&
+ power_well_id == SKL_DISP_PW_MISC_IO))
+ DRM_DEBUG_DRIVER("Clearing auxiliary requests for %s forced on "
+ "by DMC\n", power_well->name);
+ else
+ WARN_ONCE(1, "Clearing unexpected auxiliary requests for %s\n",
+ power_well->name);
- gen9_set_dc_state(dev_priv, DC_STATE_DISABLE);
+ I915_WRITE(HSW_PWR_WELL_BIOS, val & ~mask);
+ I915_WRITE(HSW_PWR_WELL_DEBUG, val & ~mask);
}
static void skl_set_power_well(struct drm_i915_private *dev_priv,
switch (power_well->data) {
case SKL_DISP_PW_1:
- if (wait_for((I915_READ(SKL_FUSE_STATUS) &
- SKL_FUSE_PG0_DIST_STATUS), 1)) {
+ if (intel_wait_for_register(dev_priv,
+ SKL_FUSE_STATUS,
+ SKL_FUSE_PG0_DIST_STATUS,
+ SKL_FUSE_PG0_DIST_STATUS,
+ 1)) {
DRM_ERROR("PG0 not enabled\n");
return;
}
if (!is_enabled) {
DRM_DEBUG_KMS("Enabling %s\n", power_well->name);
- if (wait_for((I915_READ(HSW_PWR_WELL_DRIVER) &
- state_mask), 1))
- DRM_ERROR("%s enable timeout\n",
- power_well->name);
check_fuse_status = true;
}
} else {
POSTING_READ(HSW_PWR_WELL_DRIVER);
DRM_DEBUG_KMS("Disabling %s\n", power_well->name);
}
+
+ if (IS_GEN9(dev_priv))
+ gen9_sanitize_power_well_requests(dev_priv, power_well);
}
+ if (wait_for(!!(I915_READ(HSW_PWR_WELL_DRIVER) & state_mask) == enable,
+ 1))
+ DRM_ERROR("%s %s timeout\n",
+ power_well->name, enable ? "enable" : "disable");
+
if (check_fuse_status) {
if (power_well->data == SKL_DISP_PW_1) {
- if (wait_for((I915_READ(SKL_FUSE_STATUS) &
- SKL_FUSE_PG1_DIST_STATUS), 1))
+ if (intel_wait_for_register(dev_priv,
+ SKL_FUSE_STATUS,
+ SKL_FUSE_PG1_DIST_STATUS,
+ SKL_FUSE_PG1_DIST_STATUS,
+ 1))
DRM_ERROR("PG1 distributing status timeout\n");
} else if (power_well->data == SKL_DISP_PW_2) {
- if (wait_for((I915_READ(SKL_FUSE_STATUS) &
- SKL_FUSE_PG2_DIST_STATUS), 1))
+ if (intel_wait_for_register(dev_priv,
+ SKL_FUSE_STATUS,
+ SKL_FUSE_PG2_DIST_STATUS,
+ SKL_FUSE_PG2_DIST_STATUS,
+ 1))
DRM_ERROR("PG2 distributing status timeout\n");
}
}
skl_set_power_well(dev_priv, power_well, false);
}
+static enum dpio_phy bxt_power_well_to_phy(struct i915_power_well *power_well)
+{
+ enum skl_disp_power_wells power_well_id = power_well->data;
+
+ return power_well_id == BXT_DPIO_CMN_A ? DPIO_PHY1 : DPIO_PHY0;
+}
+
+static void bxt_dpio_cmn_power_well_enable(struct drm_i915_private *dev_priv,
+ struct i915_power_well *power_well)
+{
+ enum skl_disp_power_wells power_well_id = power_well->data;
+ struct i915_power_well *cmn_a_well;
+
+ if (power_well_id == BXT_DPIO_CMN_BC) {
+ /*
+ * We need to copy the GRC calibration value from the eDP PHY,
+ * so make sure it's powered up.
+ */
+ cmn_a_well = lookup_power_well(dev_priv, BXT_DPIO_CMN_A);
+ intel_power_well_get(dev_priv, cmn_a_well);
+ }
+
+ bxt_ddi_phy_init(dev_priv, bxt_power_well_to_phy(power_well));
+
+ if (power_well_id == BXT_DPIO_CMN_BC)
+ intel_power_well_put(dev_priv, cmn_a_well);
+}
+
+static void bxt_dpio_cmn_power_well_disable(struct drm_i915_private *dev_priv,
+ struct i915_power_well *power_well)
+{
+ bxt_ddi_phy_uninit(dev_priv, bxt_power_well_to_phy(power_well));
+}
+
+static bool bxt_dpio_cmn_power_well_enabled(struct drm_i915_private *dev_priv,
+ struct i915_power_well *power_well)
+{
+ return bxt_ddi_phy_is_enabled(dev_priv,
+ bxt_power_well_to_phy(power_well));
+}
+
+static void bxt_dpio_cmn_power_well_sync_hw(struct drm_i915_private *dev_priv,
+ struct i915_power_well *power_well)
+{
+ if (power_well->count > 0)
+ bxt_dpio_cmn_power_well_enable(dev_priv, power_well);
+ else
+ bxt_dpio_cmn_power_well_disable(dev_priv, power_well);
+}
+
+
+static void bxt_verify_ddi_phy_power_wells(struct drm_i915_private *dev_priv)
+{
+ struct i915_power_well *power_well;
+
+ power_well = lookup_power_well(dev_priv, BXT_DPIO_CMN_A);
+ if (power_well->count > 0)
+ bxt_ddi_phy_verify_state(dev_priv,
+ bxt_power_well_to_phy(power_well));
+
+ power_well = lookup_power_well(dev_priv, BXT_DPIO_CMN_BC);
+ if (power_well->count > 0)
+ bxt_ddi_phy_verify_state(dev_priv,
+ bxt_power_well_to_phy(power_well));
+}
+
static bool gen9_dc_off_power_well_enabled(struct drm_i915_private *dev_priv,
struct i915_power_well *power_well)
{
return (I915_READ(DC_STATE_EN) & DC_STATE_EN_UPTO_DC5_DC6_MASK) == 0;
}
+static void gen9_assert_dbuf_enabled(struct drm_i915_private *dev_priv)
+{
+ u32 tmp = I915_READ(DBUF_CTL);
+
+ WARN((tmp & (DBUF_POWER_STATE | DBUF_POWER_REQUEST)) !=
+ (DBUF_POWER_STATE | DBUF_POWER_REQUEST),
+ "Unexpected DBuf power power state (0x%08x)\n", tmp);
+}
+
static void gen9_dc_off_power_well_enable(struct drm_i915_private *dev_priv,
struct i915_power_well *power_well)
{
- gen9_disable_dc5_dc6(dev_priv);
+ gen9_set_dc_state(dev_priv, DC_STATE_DISABLE);
+
+ WARN_ON(dev_priv->cdclk_freq !=
+ dev_priv->display.get_display_clock_speed(&dev_priv->drm));
+
+ gen9_assert_dbuf_enabled(dev_priv);
+
+ if (IS_BROXTON(dev_priv))
+ bxt_verify_ddi_phy_power_wells(dev_priv);
}
static void gen9_dc_off_power_well_disable(struct drm_i915_private *dev_priv,
struct i915_power_well *power_well)
{
- if ((IS_SKYLAKE(dev_priv) || IS_KABYLAKE(dev_priv)) &&
- i915.enable_dc != 0 && i915.enable_dc != 1)
+ if (!dev_priv->csr.dmc_payload)
+ return;
+
+ if (dev_priv->csr.allowed_dc_mask & DC_STATE_EN_UPTO_DC6)
skl_enable_dc6(dev_priv);
- else
+ else if (dev_priv->csr.allowed_dc_mask & DC_STATE_EN_UPTO_DC5)
gen9_enable_dc5(dev_priv);
}
static void gen9_dc_off_power_well_sync_hw(struct drm_i915_private *dev_priv,
struct i915_power_well *power_well)
{
- if (power_well->count > 0) {
- gen9_set_dc_state(dev_priv, DC_STATE_DISABLE);
- } else {
- if ((IS_SKYLAKE(dev_priv) || IS_KABYLAKE(dev_priv)) &&
- i915.enable_dc != 0 &&
- i915.enable_dc != 1)
- gen9_set_dc_state(dev_priv, DC_STATE_EN_UPTO_DC6);
- else
- gen9_set_dc_state(dev_priv, DC_STATE_EN_UPTO_DC5);
- }
+ if (power_well->count > 0)
+ gen9_dc_off_power_well_enable(dev_priv, power_well);
+ else
+ gen9_dc_off_power_well_disable(dev_priv, power_well);
}
static void i9xx_always_on_power_well_noop(struct drm_i915_private *dev_priv,
return enabled;
}
+static void vlv_init_display_clock_gating(struct drm_i915_private *dev_priv)
+{
+ I915_WRITE(DSPCLK_GATE_D, VRHUNIT_CLOCK_GATE_DISABLE);
+
+ /*
+ * Disable trickle feed and enable pnd deadline calculation
+ */
+ I915_WRITE(MI_ARB_VLV, MI_ARB_DISPLAY_TRICKLE_FEED_DISABLE);
+ I915_WRITE(CBR1_VLV, 0);
+
+ WARN_ON(dev_priv->rawclk_freq == 0);
+
+ I915_WRITE(RAWCLK_FREQ_VLV,
+ DIV_ROUND_CLOSEST(dev_priv->rawclk_freq, 1000));
+}
+
static void vlv_display_power_well_init(struct drm_i915_private *dev_priv)
{
+ struct intel_encoder *encoder;
enum pipe pipe;
/*
*
* CHV DPLL B/C have some issues if VGA mode is enabled.
*/
- for_each_pipe(dev_priv->dev, pipe) {
+ for_each_pipe(&dev_priv->drm, pipe) {
u32 val = I915_READ(DPLL(pipe));
val |= DPLL_REF_CLK_ENABLE_VLV | DPLL_VGA_MODE_DIS;
I915_WRITE(DPLL(pipe), val);
}
+ vlv_init_display_clock_gating(dev_priv);
+
spin_lock_irq(&dev_priv->irq_lock);
valleyview_enable_display_irqs(dev_priv);
spin_unlock_irq(&dev_priv->irq_lock);
intel_hpd_init(dev_priv);
- i915_redisable_vga_power_on(dev_priv->dev);
+ /* Re-enable the ADPA, if we have one */
+ for_each_intel_encoder(&dev_priv->drm, encoder) {
+ if (encoder->type == INTEL_OUTPUT_ANALOG)
+ intel_crt_reset(&encoder->base);
+ }
+
+ i915_redisable_vga_power_on(&dev_priv->drm);
}
static void vlv_display_power_well_deinit(struct drm_i915_private *dev_priv)
spin_unlock_irq(&dev_priv->irq_lock);
/* make sure we're done processing display irqs */
- synchronize_irq(dev_priv->dev->irq);
+ synchronize_irq(dev_priv->drm.irq);
+
+ intel_power_sequencer_reset(dev_priv);
- vlv_power_sequencer_reset(dev_priv);
+ intel_hpd_poll_init(dev_priv);
}
static void vlv_display_power_well_enable(struct drm_i915_private *dev_priv,
u32 phy_control = dev_priv->chv_phy_control;
u32 phy_status = 0;
u32 phy_status_mask = 0xffffffff;
- u32 tmp;
/*
* The BIOS can leave the PHY is some weird state
* The PHY may be busy with some initial calibration and whatnot,
* so the power state can take a while to actually change.
*/
- if (wait_for((tmp = I915_READ(DISPLAY_PHY_STATUS) & phy_status_mask) == phy_status, 10))
- WARN(phy_status != tmp,
- "Unexpected PHY_STATUS 0x%08x, expected 0x%08x (PHY_CONTROL=0x%08x)\n",
- tmp, phy_status, dev_priv->chv_phy_control);
+ if (intel_wait_for_register(dev_priv,
+ DISPLAY_PHY_STATUS,
+ phy_status_mask,
+ phy_status,
+ 10))
+ DRM_ERROR("Unexpected PHY_STATUS 0x%08x, expected 0x%08x (PHY_CONTROL=0x%08x)\n",
+ I915_READ(DISPLAY_PHY_STATUS) & phy_status_mask,
+ phy_status, dev_priv->chv_phy_control);
}
#undef BITS_SET
vlv_set_power_well(dev_priv, power_well, true);
/* Poll for phypwrgood signal */
- if (wait_for(I915_READ(DISPLAY_PHY_STATUS) & PHY_POWERGOOD(phy), 1))
+ if (intel_wait_for_register(dev_priv,
+ DISPLAY_PHY_STATUS,
+ PHY_POWERGOOD(phy),
+ PHY_POWERGOOD(phy),
+ 1))
DRM_ERROR("Display PHY %d is not power up\n", phy);
mutex_lock(&dev_priv->sb_lock);
struct i915_power_well *power_well;
int i;
- for_each_power_well(i, power_well, BIT(domain), power_domains) {
- if (!power_well->count++)
- intel_power_well_enable(dev_priv, power_well);
- }
+ for_each_power_well(i, power_well, BIT(domain), power_domains)
+ intel_power_well_get(dev_priv, power_well);
power_domains->domain_use_count[domain]++;
}
intel_display_power_domain_str(domain));
power_domains->domain_use_count[domain]--;
- for_each_power_well_rev(i, power_well, BIT(domain), power_domains) {
- WARN(!power_well->count,
- "Use count on power well %s is already zero",
- power_well->name);
-
- if (!--power_well->count)
- intel_power_well_disable(dev_priv, power_well);
- }
+ for_each_power_well_rev(i, power_well, BIT(domain), power_domains)
+ intel_power_well_put(dev_priv, power_well);
mutex_unlock(&power_domains->lock);
intel_runtime_pm_put(dev_priv);
}
-#define HSW_ALWAYS_ON_POWER_DOMAINS ( \
- BIT(POWER_DOMAIN_PIPE_A) | \
- BIT(POWER_DOMAIN_TRANSCODER_EDP) | \
- BIT(POWER_DOMAIN_PORT_DDI_A_LANES) | \
+#define HSW_DISPLAY_POWER_DOMAINS ( \
+ BIT(POWER_DOMAIN_PIPE_B) | \
+ BIT(POWER_DOMAIN_PIPE_C) | \
+ BIT(POWER_DOMAIN_PIPE_A_PANEL_FITTER) | \
+ BIT(POWER_DOMAIN_PIPE_B_PANEL_FITTER) | \
+ BIT(POWER_DOMAIN_PIPE_C_PANEL_FITTER) | \
+ BIT(POWER_DOMAIN_TRANSCODER_A) | \
+ BIT(POWER_DOMAIN_TRANSCODER_B) | \
+ BIT(POWER_DOMAIN_TRANSCODER_C) | \
BIT(POWER_DOMAIN_PORT_DDI_B_LANES) | \
BIT(POWER_DOMAIN_PORT_DDI_C_LANES) | \
BIT(POWER_DOMAIN_PORT_DDI_D_LANES) | \
- BIT(POWER_DOMAIN_PORT_CRT) | \
- BIT(POWER_DOMAIN_PLLS) | \
- BIT(POWER_DOMAIN_AUX_A) | \
- BIT(POWER_DOMAIN_AUX_B) | \
- BIT(POWER_DOMAIN_AUX_C) | \
- BIT(POWER_DOMAIN_AUX_D) | \
- BIT(POWER_DOMAIN_GMBUS) | \
- BIT(POWER_DOMAIN_INIT))
-#define HSW_DISPLAY_POWER_DOMAINS ( \
- (POWER_DOMAIN_MASK & ~HSW_ALWAYS_ON_POWER_DOMAINS) | \
+ BIT(POWER_DOMAIN_PORT_CRT) | /* DDI E */ \
+ BIT(POWER_DOMAIN_VGA) | \
+ BIT(POWER_DOMAIN_AUDIO) | \
BIT(POWER_DOMAIN_INIT))
-#define BDW_ALWAYS_ON_POWER_DOMAINS ( \
- HSW_ALWAYS_ON_POWER_DOMAINS | \
- BIT(POWER_DOMAIN_PIPE_A_PANEL_FITTER))
-#define BDW_DISPLAY_POWER_DOMAINS ( \
- (POWER_DOMAIN_MASK & ~BDW_ALWAYS_ON_POWER_DOMAINS) | \
+#define BDW_DISPLAY_POWER_DOMAINS ( \
+ BIT(POWER_DOMAIN_PIPE_B) | \
+ BIT(POWER_DOMAIN_PIPE_C) | \
+ BIT(POWER_DOMAIN_PIPE_B_PANEL_FITTER) | \
+ BIT(POWER_DOMAIN_PIPE_C_PANEL_FITTER) | \
+ BIT(POWER_DOMAIN_TRANSCODER_A) | \
+ BIT(POWER_DOMAIN_TRANSCODER_B) | \
+ BIT(POWER_DOMAIN_TRANSCODER_C) | \
+ BIT(POWER_DOMAIN_PORT_DDI_B_LANES) | \
+ BIT(POWER_DOMAIN_PORT_DDI_C_LANES) | \
+ BIT(POWER_DOMAIN_PORT_DDI_D_LANES) | \
+ BIT(POWER_DOMAIN_PORT_CRT) | /* DDI E */ \
+ BIT(POWER_DOMAIN_VGA) | \
+ BIT(POWER_DOMAIN_AUDIO) | \
BIT(POWER_DOMAIN_INIT))
-#define VLV_ALWAYS_ON_POWER_DOMAINS BIT(POWER_DOMAIN_INIT)
-#define VLV_DISPLAY_POWER_DOMAINS POWER_DOMAIN_MASK
+#define VLV_DISPLAY_POWER_DOMAINS ( \
+ BIT(POWER_DOMAIN_PIPE_A) | \
+ BIT(POWER_DOMAIN_PIPE_B) | \
+ BIT(POWER_DOMAIN_PIPE_A_PANEL_FITTER) | \
+ BIT(POWER_DOMAIN_PIPE_B_PANEL_FITTER) | \
+ BIT(POWER_DOMAIN_TRANSCODER_A) | \
+ BIT(POWER_DOMAIN_TRANSCODER_B) | \
+ BIT(POWER_DOMAIN_PORT_DDI_B_LANES) | \
+ BIT(POWER_DOMAIN_PORT_DDI_C_LANES) | \
+ BIT(POWER_DOMAIN_PORT_DSI) | \
+ BIT(POWER_DOMAIN_PORT_CRT) | \
+ BIT(POWER_DOMAIN_VGA) | \
+ BIT(POWER_DOMAIN_AUDIO) | \
+ BIT(POWER_DOMAIN_AUX_B) | \
+ BIT(POWER_DOMAIN_AUX_C) | \
+ BIT(POWER_DOMAIN_GMBUS) | \
+ BIT(POWER_DOMAIN_INIT))
#define VLV_DPIO_CMN_BC_POWER_DOMAINS ( \
BIT(POWER_DOMAIN_PORT_DDI_B_LANES) | \
BIT(POWER_DOMAIN_AUX_C) | \
BIT(POWER_DOMAIN_INIT))
+#define CHV_DISPLAY_POWER_DOMAINS ( \
+ BIT(POWER_DOMAIN_PIPE_A) | \
+ BIT(POWER_DOMAIN_PIPE_B) | \
+ BIT(POWER_DOMAIN_PIPE_C) | \
+ BIT(POWER_DOMAIN_PIPE_A_PANEL_FITTER) | \
+ BIT(POWER_DOMAIN_PIPE_B_PANEL_FITTER) | \
+ BIT(POWER_DOMAIN_PIPE_C_PANEL_FITTER) | \
+ BIT(POWER_DOMAIN_TRANSCODER_A) | \
+ BIT(POWER_DOMAIN_TRANSCODER_B) | \
+ BIT(POWER_DOMAIN_TRANSCODER_C) | \
+ BIT(POWER_DOMAIN_PORT_DDI_B_LANES) | \
+ BIT(POWER_DOMAIN_PORT_DDI_C_LANES) | \
+ BIT(POWER_DOMAIN_PORT_DDI_D_LANES) | \
+ BIT(POWER_DOMAIN_PORT_DSI) | \
+ BIT(POWER_DOMAIN_VGA) | \
+ BIT(POWER_DOMAIN_AUDIO) | \
+ BIT(POWER_DOMAIN_AUX_B) | \
+ BIT(POWER_DOMAIN_AUX_C) | \
+ BIT(POWER_DOMAIN_AUX_D) | \
+ BIT(POWER_DOMAIN_GMBUS) | \
+ BIT(POWER_DOMAIN_INIT))
+
#define CHV_DPIO_CMN_BC_POWER_DOMAINS ( \
BIT(POWER_DOMAIN_PORT_DDI_B_LANES) | \
BIT(POWER_DOMAIN_PORT_DDI_C_LANES) | \
.is_enabled = gen9_dc_off_power_well_enabled,
};
+static const struct i915_power_well_ops bxt_dpio_cmn_power_well_ops = {
+ .sync_hw = bxt_dpio_cmn_power_well_sync_hw,
+ .enable = bxt_dpio_cmn_power_well_enable,
+ .disable = bxt_dpio_cmn_power_well_disable,
+ .is_enabled = bxt_dpio_cmn_power_well_enabled,
+};
+
static struct i915_power_well hsw_power_wells[] = {
{
.name = "always-on",
.always_on = 1,
- .domains = HSW_ALWAYS_ON_POWER_DOMAINS,
+ .domains = POWER_DOMAIN_MASK,
.ops = &i9xx_always_on_power_well_ops,
},
{
{
.name = "always-on",
.always_on = 1,
- .domains = BDW_ALWAYS_ON_POWER_DOMAINS,
+ .domains = POWER_DOMAIN_MASK,
.ops = &i9xx_always_on_power_well_ops,
},
{
{
.name = "always-on",
.always_on = 1,
- .domains = VLV_ALWAYS_ON_POWER_DOMAINS,
+ .domains = POWER_DOMAIN_MASK,
.ops = &i9xx_always_on_power_well_ops,
.data = PUNIT_POWER_WELL_ALWAYS_ON,
},
{
.name = "always-on",
.always_on = 1,
- .domains = VLV_ALWAYS_ON_POWER_DOMAINS,
+ .domains = POWER_DOMAIN_MASK,
.ops = &i9xx_always_on_power_well_ops,
},
{
* power wells don't actually exist. Pipe A power well is
* required for any pipe to work.
*/
- .domains = VLV_DISPLAY_POWER_DOMAINS,
+ .domains = CHV_DISPLAY_POWER_DOMAINS,
.data = PIPE_A,
.ops = &chv_pipe_power_well_ops,
},
{
.name = "always-on",
.always_on = 1,
- .domains = SKL_DISPLAY_ALWAYS_ON_POWER_DOMAINS,
+ .domains = POWER_DOMAIN_MASK,
.ops = &i9xx_always_on_power_well_ops,
.data = SKL_DISP_PW_ALWAYS_ON,
},
},
};
-void skl_pw1_misc_io_init(struct drm_i915_private *dev_priv)
-{
- struct i915_power_well *well;
-
- if (!(IS_SKYLAKE(dev_priv) || IS_KABYLAKE(dev_priv)))
- return;
-
- well = lookup_power_well(dev_priv, SKL_DISP_PW_1);
- intel_power_well_enable(dev_priv, well);
-
- well = lookup_power_well(dev_priv, SKL_DISP_PW_MISC_IO);
- intel_power_well_enable(dev_priv, well);
-}
-
-void skl_pw1_misc_io_fini(struct drm_i915_private *dev_priv)
-{
- struct i915_power_well *well;
-
- if (!(IS_SKYLAKE(dev_priv) || IS_KABYLAKE(dev_priv)))
- return;
-
- well = lookup_power_well(dev_priv, SKL_DISP_PW_1);
- intel_power_well_disable(dev_priv, well);
-
- well = lookup_power_well(dev_priv, SKL_DISP_PW_MISC_IO);
- intel_power_well_disable(dev_priv, well);
-}
-
static struct i915_power_well bxt_power_wells[] = {
{
.name = "always-on",
.always_on = 1,
- .domains = BXT_DISPLAY_ALWAYS_ON_POWER_DOMAINS,
+ .domains = POWER_DOMAIN_MASK,
.ops = &i9xx_always_on_power_well_ops,
},
{
.name = "power well 1",
- .domains = BXT_DISPLAY_POWERWELL_1_POWER_DOMAINS,
+ .domains = 0,
.ops = &skl_power_well_ops,
.data = SKL_DISP_PW_1,
},
.ops = &skl_power_well_ops,
.data = SKL_DISP_PW_2,
},
+ {
+ .name = "dpio-common-a",
+ .domains = BXT_DPIO_CMN_A_POWER_DOMAINS,
+ .ops = &bxt_dpio_cmn_power_well_ops,
+ .data = BXT_DPIO_CMN_A,
+ },
+ {
+ .name = "dpio-common-bc",
+ .domains = BXT_DPIO_CMN_BC_POWER_DOMAINS,
+ .ops = &bxt_dpio_cmn_power_well_ops,
+ .data = BXT_DPIO_CMN_BC,
+ },
};
static int
if (disable_power_well >= 0)
return !!disable_power_well;
- if (IS_BROXTON(dev_priv)) {
- DRM_DEBUG_KMS("Disabling display power well support\n");
- return 0;
+ return 1;
+}
+
+static uint32_t get_allowed_dc_mask(const struct drm_i915_private *dev_priv,
+ int enable_dc)
+{
+ uint32_t mask;
+ int requested_dc;
+ int max_dc;
+
+ if (IS_SKYLAKE(dev_priv) || IS_KABYLAKE(dev_priv)) {
+ max_dc = 2;
+ mask = 0;
+ } else if (IS_BROXTON(dev_priv)) {
+ max_dc = 1;
+ /*
+ * DC9 has a separate HW flow from the rest of the DC states,
+ * not depending on the DMC firmware. It's needed by system
+ * suspend/resume, so allow it unconditionally.
+ */
+ mask = DC_STATE_EN_DC9;
+ } else {
+ max_dc = 0;
+ mask = 0;
+ }
+
+ if (!i915.disable_power_well)
+ max_dc = 0;
+
+ if (enable_dc >= 0 && enable_dc <= max_dc) {
+ requested_dc = enable_dc;
+ } else if (enable_dc == -1) {
+ requested_dc = max_dc;
+ } else if (enable_dc > max_dc && enable_dc <= 2) {
+ DRM_DEBUG_KMS("Adjusting requested max DC state (%d->%d)\n",
+ enable_dc, max_dc);
+ requested_dc = max_dc;
+ } else {
+ DRM_ERROR("Unexpected value for enable_dc (%d)\n", enable_dc);
+ requested_dc = max_dc;
}
- return 1;
+ if (requested_dc > 1)
+ mask |= DC_STATE_EN_UPTO_DC6;
+ if (requested_dc > 0)
+ mask |= DC_STATE_EN_UPTO_DC5;
+
+ DRM_DEBUG_KMS("Allowed DC state mask %02x\n", mask);
+
+ return mask;
}
#define set_power_wells(power_domains, __power_wells) ({ \
i915.disable_power_well = sanitize_disable_power_well_option(dev_priv,
i915.disable_power_well);
+ dev_priv->csr.allowed_dc_mask = get_allowed_dc_mask(dev_priv,
+ i915.enable_dc);
BUILD_BUG_ON(POWER_DOMAIN_NUM > 31);
* The enabling order will be from lower to higher indexed wells,
* the disabling order is reversed.
*/
- if (IS_HASWELL(dev_priv->dev)) {
+ if (IS_HASWELL(dev_priv)) {
set_power_wells(power_domains, hsw_power_wells);
- } else if (IS_BROADWELL(dev_priv->dev)) {
+ } else if (IS_BROADWELL(dev_priv)) {
set_power_wells(power_domains, bdw_power_wells);
- } else if (IS_SKYLAKE(dev_priv->dev) || IS_KABYLAKE(dev_priv->dev)) {
+ } else if (IS_SKYLAKE(dev_priv) || IS_KABYLAKE(dev_priv)) {
set_power_wells(power_domains, skl_power_wells);
- } else if (IS_BROXTON(dev_priv->dev)) {
+ } else if (IS_BROXTON(dev_priv)) {
set_power_wells(power_domains, bxt_power_wells);
- } else if (IS_CHERRYVIEW(dev_priv->dev)) {
+ } else if (IS_CHERRYVIEW(dev_priv)) {
set_power_wells(power_domains, chv_power_wells);
- } else if (IS_VALLEYVIEW(dev_priv->dev)) {
+ } else if (IS_VALLEYVIEW(dev_priv)) {
set_power_wells(power_domains, vlv_power_wells);
} else {
set_power_wells(power_domains, i9xx_always_on_power_well);
*/
void intel_power_domains_fini(struct drm_i915_private *dev_priv)
{
- struct device *device = &dev_priv->dev->pdev->dev;
+ struct device *device = &dev_priv->drm.pdev->dev;
/*
* The i915.ko module is still not prepared to be loaded when
mutex_unlock(&power_domains->lock);
}
+static void gen9_dbuf_enable(struct drm_i915_private *dev_priv)
+{
+ I915_WRITE(DBUF_CTL, I915_READ(DBUF_CTL) | DBUF_POWER_REQUEST);
+ POSTING_READ(DBUF_CTL);
+
+ udelay(10);
+
+ if (!(I915_READ(DBUF_CTL) & DBUF_POWER_STATE))
+ DRM_ERROR("DBuf power enable timeout\n");
+}
+
+static void gen9_dbuf_disable(struct drm_i915_private *dev_priv)
+{
+ I915_WRITE(DBUF_CTL, I915_READ(DBUF_CTL) & ~DBUF_POWER_REQUEST);
+ POSTING_READ(DBUF_CTL);
+
+ udelay(10);
+
+ if (I915_READ(DBUF_CTL) & DBUF_POWER_STATE)
+ DRM_ERROR("DBuf power disable timeout!\n");
+}
+
static void skl_display_core_init(struct drm_i915_private *dev_priv,
- bool resume)
+ bool resume)
{
struct i915_power_domains *power_domains = &dev_priv->power_domains;
+ struct i915_power_well *well;
uint32_t val;
gen9_set_dc_state(dev_priv, DC_STATE_DISABLE);
/* enable PG1 and Misc I/O */
mutex_lock(&power_domains->lock);
- skl_pw1_misc_io_init(dev_priv);
- mutex_unlock(&power_domains->lock);
- if (!resume)
- return;
+ well = lookup_power_well(dev_priv, SKL_DISP_PW_1);
+ intel_power_well_enable(dev_priv, well);
+
+ well = lookup_power_well(dev_priv, SKL_DISP_PW_MISC_IO);
+ intel_power_well_enable(dev_priv, well);
+
+ mutex_unlock(&power_domains->lock);
skl_init_cdclk(dev_priv);
- if (dev_priv->csr.dmc_payload && intel_csr_load_program(dev_priv))
- gen9_set_dc_state_debugmask(dev_priv);
+ gen9_dbuf_enable(dev_priv);
+
+ if (resume && dev_priv->csr.dmc_payload)
+ intel_csr_load_program(dev_priv);
}
static void skl_display_core_uninit(struct drm_i915_private *dev_priv)
{
struct i915_power_domains *power_domains = &dev_priv->power_domains;
+ struct i915_power_well *well;
gen9_set_dc_state(dev_priv, DC_STATE_DISABLE);
+ gen9_dbuf_disable(dev_priv);
+
skl_uninit_cdclk(dev_priv);
/* The spec doesn't call for removing the reset handshake flag */
/* disable PG1 and Misc I/O */
+
+ mutex_lock(&power_domains->lock);
+
+ well = lookup_power_well(dev_priv, SKL_DISP_PW_MISC_IO);
+ intel_power_well_disable(dev_priv, well);
+
+ well = lookup_power_well(dev_priv, SKL_DISP_PW_1);
+ intel_power_well_disable(dev_priv, well);
+
+ mutex_unlock(&power_domains->lock);
+}
+
+void bxt_display_core_init(struct drm_i915_private *dev_priv,
+ bool resume)
+{
+ struct i915_power_domains *power_domains = &dev_priv->power_domains;
+ struct i915_power_well *well;
+ uint32_t val;
+
+ gen9_set_dc_state(dev_priv, DC_STATE_DISABLE);
+
+ /*
+ * NDE_RSTWRN_OPT RST PCH Handshake En must always be 0b on BXT
+ * or else the reset will hang because there is no PCH to respond.
+ * Move the handshake programming to initialization sequence.
+ * Previously was left up to BIOS.
+ */
+ val = I915_READ(HSW_NDE_RSTWRN_OPT);
+ val &= ~RESET_PCH_HANDSHAKE_ENABLE;
+ I915_WRITE(HSW_NDE_RSTWRN_OPT, val);
+
+ /* Enable PG1 */
+ mutex_lock(&power_domains->lock);
+
+ well = lookup_power_well(dev_priv, SKL_DISP_PW_1);
+ intel_power_well_enable(dev_priv, well);
+
+ mutex_unlock(&power_domains->lock);
+
+ bxt_init_cdclk(dev_priv);
+
+ gen9_dbuf_enable(dev_priv);
+
+ if (resume && dev_priv->csr.dmc_payload)
+ intel_csr_load_program(dev_priv);
+}
+
+void bxt_display_core_uninit(struct drm_i915_private *dev_priv)
+{
+ struct i915_power_domains *power_domains = &dev_priv->power_domains;
+ struct i915_power_well *well;
+
+ gen9_set_dc_state(dev_priv, DC_STATE_DISABLE);
+
+ gen9_dbuf_disable(dev_priv);
+
+ bxt_uninit_cdclk(dev_priv);
+
+ /* The spec doesn't call for removing the reset handshake flag */
+
+ /* Disable PG1 */
mutex_lock(&power_domains->lock);
- skl_pw1_misc_io_fini(dev_priv);
+
+ well = lookup_power_well(dev_priv, SKL_DISP_PW_1);
+ intel_power_well_disable(dev_priv, well);
+
mutex_unlock(&power_domains->lock);
}
/**
* intel_power_domains_init_hw - initialize hardware power domain state
* @dev_priv: i915 device instance
+ * @resume: Called from resume code paths or not
*
* This function initializes the hardware power domain state and enables all
* power domains using intel_display_set_init_power().
*/
void intel_power_domains_init_hw(struct drm_i915_private *dev_priv, bool resume)
{
- struct drm_device *dev = dev_priv->dev;
+ struct drm_device *dev = &dev_priv->drm;
struct i915_power_domains *power_domains = &dev_priv->power_domains;
power_domains->initializing = true;
if (IS_SKYLAKE(dev) || IS_KABYLAKE(dev)) {
skl_display_core_init(dev_priv, resume);
+ } else if (IS_BROXTON(dev)) {
+ bxt_display_core_init(dev_priv, resume);
} else if (IS_CHERRYVIEW(dev)) {
mutex_lock(&power_domains->lock);
chv_phy_control_init(dev_priv);
if (IS_SKYLAKE(dev_priv) || IS_KABYLAKE(dev_priv))
skl_display_core_uninit(dev_priv);
+ else if (IS_BROXTON(dev_priv))
+ bxt_display_core_uninit(dev_priv);
}
/**
*/
void intel_runtime_pm_get(struct drm_i915_private *dev_priv)
{
- struct drm_device *dev = dev_priv->dev;
+ struct drm_device *dev = &dev_priv->drm;
struct device *device = &dev->pdev->dev;
pm_runtime_get_sync(device);
*/
bool intel_runtime_pm_get_if_in_use(struct drm_i915_private *dev_priv)
{
- struct drm_device *dev = dev_priv->dev;
+ struct drm_device *dev = &dev_priv->drm;
struct device *device = &dev->pdev->dev;
if (IS_ENABLED(CONFIG_PM)) {
*/
void intel_runtime_pm_get_noresume(struct drm_i915_private *dev_priv)
{
- struct drm_device *dev = dev_priv->dev;
+ struct drm_device *dev = &dev_priv->drm;
struct device *device = &dev->pdev->dev;
assert_rpm_wakelock_held(dev_priv);
*/
void intel_runtime_pm_put(struct drm_i915_private *dev_priv)
{
- struct drm_device *dev = dev_priv->dev;
+ struct drm_device *dev = &dev_priv->drm;
struct device *device = &dev->pdev->dev;
assert_rpm_wakelock_held(dev_priv);
*/
void intel_runtime_pm_enable(struct drm_i915_private *dev_priv)
{
- struct drm_device *dev = dev_priv->dev;
+ struct drm_device *dev = &dev_priv->drm;
struct device *device = &dev->pdev->dev;
pm_runtime_set_autosuspend_delay(device, 10000); /* 10s */
projects / cascardo / linux.git / blobdiff