bool intel_display_power_well_is_enabled(struct drm_i915_private *dev_priv,
int power_well_id);
+static struct i915_power_well *
+lookup_power_well(struct drm_i915_private *dev_priv, int power_well_id);
+
const char *
intel_display_power_domain_str(enum intel_display_power_domain domain)
{
power_well->ops->disable(dev_priv, power_well);
}
+static void intel_power_well_get(struct drm_i915_private *dev_priv,
+ struct i915_power_well *power_well)
+{
+ if (!power_well->count++)
+ intel_power_well_enable(dev_priv, power_well);
+}
+
+static void intel_power_well_put(struct drm_i915_private *dev_priv,
+ struct i915_power_well *power_well)
+{
+ WARN(!power_well->count, "Use count on power well %s is already zero",
+ power_well->name);
+
+ if (!--power_well->count)
+ intel_power_well_disable(dev_priv, power_well);
+}
+
/*
* We should only use the power well if we explicitly asked the hardware to
* enable it, so check if it's enabled and also check if we've requested it to
*/
static void hsw_power_well_post_enable(struct drm_i915_private *dev_priv)
{
- struct drm_device *dev = dev_priv->dev;
+ struct drm_device *dev = &dev_priv->drm;
/*
* After we re-enable the power well, if we touch VGA register 0x3d5
static void skl_power_well_post_enable(struct drm_i915_private *dev_priv,
struct i915_power_well *power_well)
{
- struct drm_device *dev = dev_priv->dev;
+ struct drm_device *dev = &dev_priv->drm;
/*
* After we re-enable the power well, if we touch VGA register 0x3d5
if (!is_enabled) {
DRM_DEBUG_KMS("Enabling power well\n");
- if (wait_for((I915_READ(HSW_PWR_WELL_DRIVER) &
- HSW_PWR_WELL_STATE_ENABLED), 20))
+ if (intel_wait_for_register(dev_priv,
+ HSW_PWR_WELL_DRIVER,
+ HSW_PWR_WELL_STATE_ENABLED,
+ HSW_PWR_WELL_STATE_ENABLED,
+ 20))
DRM_ERROR("Timeout enabling power well\n");
hsw_power_well_post_enable(dev_priv);
}
BIT(POWER_DOMAIN_MODESET) | \
BIT(POWER_DOMAIN_AUX_A) | \
BIT(POWER_DOMAIN_INIT))
+#define BXT_DPIO_CMN_A_POWER_DOMAINS ( \
+ BIT(POWER_DOMAIN_PORT_DDI_A_LANES) | \
+ BIT(POWER_DOMAIN_AUX_A) | \
+ BIT(POWER_DOMAIN_INIT))
+#define BXT_DPIO_CMN_BC_POWER_DOMAINS ( \
+ BIT(POWER_DOMAIN_PORT_DDI_B_LANES) | \
+ BIT(POWER_DOMAIN_PORT_DDI_C_LANES) | \
+ BIT(POWER_DOMAIN_AUX_B) | \
+ BIT(POWER_DOMAIN_AUX_C) | \
+ BIT(POWER_DOMAIN_INIT))
static void assert_can_enable_dc9(struct drm_i915_private *dev_priv)
{
DRM_DEBUG_KMS("Enabling DC9\n");
+ intel_power_sequencer_reset(dev_priv);
gen9_set_dc_state(dev_priv, DC_STATE_EN_DC9);
}
switch (power_well->data) {
case SKL_DISP_PW_1:
- if (wait_for((I915_READ(SKL_FUSE_STATUS) &
- SKL_FUSE_PG0_DIST_STATUS), 1)) {
+ if (intel_wait_for_register(dev_priv,
+ SKL_FUSE_STATUS,
+ SKL_FUSE_PG0_DIST_STATUS,
+ SKL_FUSE_PG0_DIST_STATUS,
+ 1)) {
DRM_ERROR("PG0 not enabled\n");
return;
}
if (check_fuse_status) {
if (power_well->data == SKL_DISP_PW_1) {
- if (wait_for((I915_READ(SKL_FUSE_STATUS) &
- SKL_FUSE_PG1_DIST_STATUS), 1))
+ if (intel_wait_for_register(dev_priv,
+ SKL_FUSE_STATUS,
+ SKL_FUSE_PG1_DIST_STATUS,
+ SKL_FUSE_PG1_DIST_STATUS,
+ 1))
DRM_ERROR("PG1 distributing status timeout\n");
} else if (power_well->data == SKL_DISP_PW_2) {
- if (wait_for((I915_READ(SKL_FUSE_STATUS) &
- SKL_FUSE_PG2_DIST_STATUS), 1))
+ if (intel_wait_for_register(dev_priv,
+ SKL_FUSE_STATUS,
+ SKL_FUSE_PG2_DIST_STATUS,
+ SKL_FUSE_PG2_DIST_STATUS,
+ 1))
DRM_ERROR("PG2 distributing status timeout\n");
}
}
skl_set_power_well(dev_priv, power_well, false);
}
+static enum dpio_phy bxt_power_well_to_phy(struct i915_power_well *power_well)
+{
+ enum skl_disp_power_wells power_well_id = power_well->data;
+
+ return power_well_id == BXT_DPIO_CMN_A ? DPIO_PHY1 : DPIO_PHY0;
+}
+
+static void bxt_dpio_cmn_power_well_enable(struct drm_i915_private *dev_priv,
+ struct i915_power_well *power_well)
+{
+ enum skl_disp_power_wells power_well_id = power_well->data;
+ struct i915_power_well *cmn_a_well;
+
+ if (power_well_id == BXT_DPIO_CMN_BC) {
+ /*
+ * We need to copy the GRC calibration value from the eDP PHY,
+ * so make sure it's powered up.
+ */
+ cmn_a_well = lookup_power_well(dev_priv, BXT_DPIO_CMN_A);
+ intel_power_well_get(dev_priv, cmn_a_well);
+ }
+
+ bxt_ddi_phy_init(dev_priv, bxt_power_well_to_phy(power_well));
+
+ if (power_well_id == BXT_DPIO_CMN_BC)
+ intel_power_well_put(dev_priv, cmn_a_well);
+}
+
+static void bxt_dpio_cmn_power_well_disable(struct drm_i915_private *dev_priv,
+ struct i915_power_well *power_well)
+{
+ bxt_ddi_phy_uninit(dev_priv, bxt_power_well_to_phy(power_well));
+}
+
+static bool bxt_dpio_cmn_power_well_enabled(struct drm_i915_private *dev_priv,
+ struct i915_power_well *power_well)
+{
+ return bxt_ddi_phy_is_enabled(dev_priv,
+ bxt_power_well_to_phy(power_well));
+}
+
+static void bxt_dpio_cmn_power_well_sync_hw(struct drm_i915_private *dev_priv,
+ struct i915_power_well *power_well)
+{
+ if (power_well->count > 0)
+ bxt_dpio_cmn_power_well_enable(dev_priv, power_well);
+ else
+ bxt_dpio_cmn_power_well_disable(dev_priv, power_well);
+}
+
+
+static void bxt_verify_ddi_phy_power_wells(struct drm_i915_private *dev_priv)
+{
+ struct i915_power_well *power_well;
+
+ power_well = lookup_power_well(dev_priv, BXT_DPIO_CMN_A);
+ if (power_well->count > 0)
+ bxt_ddi_phy_verify_state(dev_priv,
+ bxt_power_well_to_phy(power_well));
+
+ power_well = lookup_power_well(dev_priv, BXT_DPIO_CMN_BC);
+ if (power_well->count > 0)
+ bxt_ddi_phy_verify_state(dev_priv,
+ bxt_power_well_to_phy(power_well));
+}
+
static bool gen9_dc_off_power_well_enabled(struct drm_i915_private *dev_priv,
struct i915_power_well *power_well)
{
return (I915_READ(DC_STATE_EN) & DC_STATE_EN_UPTO_DC5_DC6_MASK) == 0;
}
+static void gen9_assert_dbuf_enabled(struct drm_i915_private *dev_priv)
+{
+ u32 tmp = I915_READ(DBUF_CTL);
+
+ WARN((tmp & (DBUF_POWER_STATE | DBUF_POWER_REQUEST)) !=
+ (DBUF_POWER_STATE | DBUF_POWER_REQUEST),
+ "Unexpected DBuf power power state (0x%08x)\n", tmp);
+}
+
static void gen9_dc_off_power_well_enable(struct drm_i915_private *dev_priv,
struct i915_power_well *power_well)
{
gen9_set_dc_state(dev_priv, DC_STATE_DISABLE);
- if (IS_BROXTON(dev_priv)) {
- broxton_cdclk_verify_state(dev_priv);
- broxton_ddi_phy_verify_state(dev_priv);
- }
+ WARN_ON(dev_priv->cdclk_freq !=
+ dev_priv->display.get_display_clock_speed(&dev_priv->drm));
+
+ gen9_assert_dbuf_enabled(dev_priv);
+
+ if (IS_BROXTON(dev_priv))
+ bxt_verify_ddi_phy_power_wells(dev_priv);
}
static void gen9_dc_off_power_well_disable(struct drm_i915_private *dev_priv,
*/
I915_WRITE(MI_ARB_VLV, MI_ARB_DISPLAY_TRICKLE_FEED_DISABLE);
I915_WRITE(CBR1_VLV, 0);
+
+ WARN_ON(dev_priv->rawclk_freq == 0);
+
+ I915_WRITE(RAWCLK_FREQ_VLV,
+ DIV_ROUND_CLOSEST(dev_priv->rawclk_freq, 1000));
}
static void vlv_display_power_well_init(struct drm_i915_private *dev_priv)
*
* CHV DPLL B/C have some issues if VGA mode is enabled.
*/
- for_each_pipe(dev_priv->dev, pipe) {
+ for_each_pipe(&dev_priv->drm, pipe) {
u32 val = I915_READ(DPLL(pipe));
val |= DPLL_REF_CLK_ENABLE_VLV | DPLL_VGA_MODE_DIS;
intel_hpd_init(dev_priv);
- i915_redisable_vga_power_on(dev_priv->dev);
+ i915_redisable_vga_power_on(&dev_priv->drm);
}
static void vlv_display_power_well_deinit(struct drm_i915_private *dev_priv)
spin_unlock_irq(&dev_priv->irq_lock);
/* make sure we're done processing display irqs */
- synchronize_irq(dev_priv->dev->irq);
+ synchronize_irq(dev_priv->drm.irq);
- vlv_power_sequencer_reset(dev_priv);
+ intel_power_sequencer_reset(dev_priv);
}
static void vlv_display_power_well_enable(struct drm_i915_private *dev_priv,
u32 phy_control = dev_priv->chv_phy_control;
u32 phy_status = 0;
u32 phy_status_mask = 0xffffffff;
- u32 tmp;
/*
* The BIOS can leave the PHY is some weird state
* The PHY may be busy with some initial calibration and whatnot,
* so the power state can take a while to actually change.
*/
- if (wait_for((tmp = I915_READ(DISPLAY_PHY_STATUS) & phy_status_mask) == phy_status, 10))
- WARN(phy_status != tmp,
- "Unexpected PHY_STATUS 0x%08x, expected 0x%08x (PHY_CONTROL=0x%08x)\n",
- tmp, phy_status, dev_priv->chv_phy_control);
+ if (intel_wait_for_register(dev_priv,
+ DISPLAY_PHY_STATUS,
+ phy_status_mask,
+ phy_status,
+ 10))
+ DRM_ERROR("Unexpected PHY_STATUS 0x%08x, expected 0x%08x (PHY_CONTROL=0x%08x)\n",
+ I915_READ(DISPLAY_PHY_STATUS) & phy_status_mask,
+ phy_status, dev_priv->chv_phy_control);
}
#undef BITS_SET
vlv_set_power_well(dev_priv, power_well, true);
/* Poll for phypwrgood signal */
- if (wait_for(I915_READ(DISPLAY_PHY_STATUS) & PHY_POWERGOOD(phy), 1))
+ if (intel_wait_for_register(dev_priv,
+ DISPLAY_PHY_STATUS,
+ PHY_POWERGOOD(phy),
+ PHY_POWERGOOD(phy),
+ 1))
DRM_ERROR("Display PHY %d is not power up\n", phy);
mutex_lock(&dev_priv->sb_lock);
struct i915_power_well *power_well;
int i;
- for_each_power_well(i, power_well, BIT(domain), power_domains) {
- if (!power_well->count++)
- intel_power_well_enable(dev_priv, power_well);
- }
+ for_each_power_well(i, power_well, BIT(domain), power_domains)
+ intel_power_well_get(dev_priv, power_well);
power_domains->domain_use_count[domain]++;
}
intel_display_power_domain_str(domain));
power_domains->domain_use_count[domain]--;
- for_each_power_well_rev(i, power_well, BIT(domain), power_domains) {
- WARN(!power_well->count,
- "Use count on power well %s is already zero",
- power_well->name);
-
- if (!--power_well->count)
- intel_power_well_disable(dev_priv, power_well);
- }
+ for_each_power_well_rev(i, power_well, BIT(domain), power_domains)
+ intel_power_well_put(dev_priv, power_well);
mutex_unlock(&power_domains->lock);
.is_enabled = gen9_dc_off_power_well_enabled,
};
+static const struct i915_power_well_ops bxt_dpio_cmn_power_well_ops = {
+ .sync_hw = bxt_dpio_cmn_power_well_sync_hw,
+ .enable = bxt_dpio_cmn_power_well_enable,
+ .disable = bxt_dpio_cmn_power_well_disable,
+ .is_enabled = bxt_dpio_cmn_power_well_enabled,
+};
+
static struct i915_power_well hsw_power_wells[] = {
{
.name = "always-on",
.ops = &skl_power_well_ops,
.data = SKL_DISP_PW_2,
},
+ {
+ .name = "dpio-common-a",
+ .domains = BXT_DPIO_CMN_A_POWER_DOMAINS,
+ .ops = &bxt_dpio_cmn_power_well_ops,
+ .data = BXT_DPIO_CMN_A,
+ },
+ {
+ .name = "dpio-common-bc",
+ .domains = BXT_DPIO_CMN_BC_POWER_DOMAINS,
+ .ops = &bxt_dpio_cmn_power_well_ops,
+ .data = BXT_DPIO_CMN_BC,
+ },
};
static int
*/
void intel_power_domains_fini(struct drm_i915_private *dev_priv)
{
- struct device *device = &dev_priv->dev->pdev->dev;
+ struct device *device = &dev_priv->drm.pdev->dev;
/*
* The i915.ko module is still not prepared to be loaded when
mutex_unlock(&power_domains->lock);
}
+static void gen9_dbuf_enable(struct drm_i915_private *dev_priv)
+{
+ I915_WRITE(DBUF_CTL, I915_READ(DBUF_CTL) | DBUF_POWER_REQUEST);
+ POSTING_READ(DBUF_CTL);
+
+ udelay(10);
+
+ if (!(I915_READ(DBUF_CTL) & DBUF_POWER_STATE))
+ DRM_ERROR("DBuf power enable timeout\n");
+}
+
+static void gen9_dbuf_disable(struct drm_i915_private *dev_priv)
+{
+ I915_WRITE(DBUF_CTL, I915_READ(DBUF_CTL) & ~DBUF_POWER_REQUEST);
+ POSTING_READ(DBUF_CTL);
+
+ udelay(10);
+
+ if (I915_READ(DBUF_CTL) & DBUF_POWER_STATE)
+ DRM_ERROR("DBuf power disable timeout!\n");
+}
+
static void skl_display_core_init(struct drm_i915_private *dev_priv,
bool resume)
{
mutex_unlock(&power_domains->lock);
- if (!resume)
- return;
-
skl_init_cdclk(dev_priv);
- if (dev_priv->csr.dmc_payload)
+ gen9_dbuf_enable(dev_priv);
+
+ if (resume && dev_priv->csr.dmc_payload)
intel_csr_load_program(dev_priv);
}
gen9_set_dc_state(dev_priv, DC_STATE_DISABLE);
+ gen9_dbuf_disable(dev_priv);
+
skl_uninit_cdclk(dev_priv);
/* The spec doesn't call for removing the reset handshake flag */
mutex_unlock(&power_domains->lock);
- broxton_init_cdclk(dev_priv);
- broxton_ddi_phy_init(dev_priv);
+ bxt_init_cdclk(dev_priv);
- broxton_cdclk_verify_state(dev_priv);
- broxton_ddi_phy_verify_state(dev_priv);
+ gen9_dbuf_enable(dev_priv);
if (resume && dev_priv->csr.dmc_payload)
intel_csr_load_program(dev_priv);
gen9_set_dc_state(dev_priv, DC_STATE_DISABLE);
- broxton_ddi_phy_uninit(dev_priv);
- broxton_uninit_cdclk(dev_priv);
+ gen9_dbuf_disable(dev_priv);
+
+ bxt_uninit_cdclk(dev_priv);
/* The spec doesn't call for removing the reset handshake flag */
/**
* intel_power_domains_init_hw - initialize hardware power domain state
* @dev_priv: i915 device instance
+ * @resume: Called from resume code paths or not
*
* This function initializes the hardware power domain state and enables all
* power domains using intel_display_set_init_power().
*/
void intel_power_domains_init_hw(struct drm_i915_private *dev_priv, bool resume)
{
- struct drm_device *dev = dev_priv->dev;
+ struct drm_device *dev = &dev_priv->drm;
struct i915_power_domains *power_domains = &dev_priv->power_domains;
power_domains->initializing = true;
*/
void intel_runtime_pm_get(struct drm_i915_private *dev_priv)
{
- struct drm_device *dev = dev_priv->dev;
+ struct drm_device *dev = &dev_priv->drm;
struct device *device = &dev->pdev->dev;
pm_runtime_get_sync(device);
*/
bool intel_runtime_pm_get_if_in_use(struct drm_i915_private *dev_priv)
{
- struct drm_device *dev = dev_priv->dev;
+ struct drm_device *dev = &dev_priv->drm;
struct device *device = &dev->pdev->dev;
if (IS_ENABLED(CONFIG_PM)) {
*/
void intel_runtime_pm_get_noresume(struct drm_i915_private *dev_priv)
{
- struct drm_device *dev = dev_priv->dev;
+ struct drm_device *dev = &dev_priv->drm;
struct device *device = &dev->pdev->dev;
assert_rpm_wakelock_held(dev_priv);
*/
void intel_runtime_pm_put(struct drm_i915_private *dev_priv)
{
- struct drm_device *dev = dev_priv->dev;
+ struct drm_device *dev = &dev_priv->drm;
struct device *device = &dev->pdev->dev;
assert_rpm_wakelock_held(dev_priv);
*/
void intel_runtime_pm_enable(struct drm_i915_private *dev_priv)
{
- struct drm_device *dev = dev_priv->dev;
+ struct drm_device *dev = &dev_priv->drm;
struct device *device = &dev->pdev->dev;
pm_runtime_set_autosuspend_delay(device, 10000); /* 10s */
projects / cascardo / linux.git / blobdiff