* Marvell EBU SoC Device Bus Controller
* (memory controller for NOR/NAND/SRAM/FPGA devices)
*
- * Copyright (C) 2013 Marvell
+ * Copyright (C) 2013-2014 Marvell
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
#include <linux/platform_device.h>
/* Register definitions */
-#define DEV_WIDTH_BIT 30
-#define BADR_SKEW_BIT 28
-#define RD_HOLD_BIT 23
-#define ACC_NEXT_BIT 17
-#define RD_SETUP_BIT 12
-#define ACC_FIRST_BIT 6
-
-#define SYNC_ENABLE_BIT 24
-#define WR_HIGH_BIT 16
-#define WR_LOW_BIT 8
-
-#define READ_PARAM_OFFSET 0x0
-#define WRITE_PARAM_OFFSET 0x4
+#define ARMADA_DEV_WIDTH_SHIFT 30
+#define ARMADA_BADR_SKEW_SHIFT 28
+#define ARMADA_RD_HOLD_SHIFT 23
+#define ARMADA_ACC_NEXT_SHIFT 17
+#define ARMADA_RD_SETUP_SHIFT 12
+#define ARMADA_ACC_FIRST_SHIFT 6
+
+#define ARMADA_SYNC_ENABLE_SHIFT 24
+#define ARMADA_WR_HIGH_SHIFT 16
+#define ARMADA_WR_LOW_SHIFT 8
+
+#define ARMADA_READ_PARAM_OFFSET 0x0
+#define ARMADA_WRITE_PARAM_OFFSET 0x4
+
+#define ORION_RESERVED (0x2 << 30)
+#define ORION_BADR_SKEW_SHIFT 28
+#define ORION_WR_HIGH_EXT_BIT BIT(27)
+#define ORION_WR_HIGH_EXT_MASK 0x8
+#define ORION_WR_LOW_EXT_BIT BIT(26)
+#define ORION_WR_LOW_EXT_MASK 0x8
+#define ORION_ALE_WR_EXT_BIT BIT(25)
+#define ORION_ALE_WR_EXT_MASK 0x8
+#define ORION_ACC_NEXT_EXT_BIT BIT(24)
+#define ORION_ACC_NEXT_EXT_MASK 0x10
+#define ORION_ACC_FIRST_EXT_BIT BIT(23)
+#define ORION_ACC_FIRST_EXT_MASK 0x10
+#define ORION_TURN_OFF_EXT_BIT BIT(22)
+#define ORION_TURN_OFF_EXT_MASK 0x8
+#define ORION_DEV_WIDTH_SHIFT 20
+#define ORION_WR_HIGH_SHIFT 17
+#define ORION_WR_HIGH_MASK 0x7
+#define ORION_WR_LOW_SHIFT 14
+#define ORION_WR_LOW_MASK 0x7
+#define ORION_ALE_WR_SHIFT 11
+#define ORION_ALE_WR_MASK 0x7
+#define ORION_ACC_NEXT_SHIFT 7
+#define ORION_ACC_NEXT_MASK 0xF
+#define ORION_ACC_FIRST_SHIFT 3
+#define ORION_ACC_FIRST_MASK 0xF
+#define ORION_TURN_OFF_SHIFT 0
+#define ORION_TURN_OFF_MASK 0x7
struct devbus_read_params {
u32 bus_width;
return 0;
}
-static int devbus_set_timing_params(struct devbus *devbus,
- struct device_node *node)
+static int devbus_get_timing_params(struct devbus *devbus,
+ struct device_node *node,
+ struct devbus_read_params *r,
+ struct devbus_write_params *w)
{
- struct devbus_read_params r;
- struct devbus_write_params w;
- u32 value;
int err;
- dev_dbg(devbus->dev, "Setting timing parameter, tick is %lu ps\n",
- devbus->tick_ps);
-
- /* Get read timings */
- err = of_property_read_u32(node, "devbus,bus-width", &r.bus_width);
+ err = of_property_read_u32(node, "devbus,bus-width", &r->bus_width);
if (err < 0) {
dev_err(devbus->dev,
"%s has no 'devbus,bus-width' property\n",
* The bus width is encoded into the register as 0 for 8 bits,
* and 1 for 16 bits, so we do the necessary conversion here.
*/
- if (r.bus_width == 8)
- r.bus_width = 0;
- else if (r.bus_width == 16)
- r.bus_width = 1;
+ if (r->bus_width == 8)
+ r->bus_width = 0;
+ else if (r->bus_width == 16)
+ r->bus_width = 1;
else {
- dev_err(devbus->dev, "invalid bus width %d\n", r.bus_width);
+ dev_err(devbus->dev, "invalid bus width %d\n", r->bus_width);
return -EINVAL;
}
err = get_timing_param_ps(devbus, node, "devbus,badr-skew-ps",
- &r.badr_skew);
+ &r->badr_skew);
if (err < 0)
return err;
err = get_timing_param_ps(devbus, node, "devbus,turn-off-ps",
- &r.turn_off);
+ &r->turn_off);
if (err < 0)
return err;
err = get_timing_param_ps(devbus, node, "devbus,acc-first-ps",
- &r.acc_first);
+ &r->acc_first);
if (err < 0)
return err;
err = get_timing_param_ps(devbus, node, "devbus,acc-next-ps",
- &r.acc_next);
- if (err < 0)
- return err;
-
- err = get_timing_param_ps(devbus, node, "devbus,rd-setup-ps",
- &r.rd_setup);
+ &r->acc_next);
if (err < 0)
return err;
- err = get_timing_param_ps(devbus, node, "devbus,rd-hold-ps",
- &r.rd_hold);
- if (err < 0)
- return err;
-
- /* Get write timings */
- err = of_property_read_u32(node, "devbus,sync-enable",
- &w.sync_enable);
- if (err < 0) {
- dev_err(devbus->dev,
- "%s has no 'devbus,sync-enable' property\n",
- node->full_name);
- return err;
+ if (of_device_is_compatible(devbus->dev->of_node, "marvell,mvebu-devbus")) {
+ err = get_timing_param_ps(devbus, node, "devbus,rd-setup-ps",
+ &r->rd_setup);
+ if (err < 0)
+ return err;
+
+ err = get_timing_param_ps(devbus, node, "devbus,rd-hold-ps",
+ &r->rd_hold);
+ if (err < 0)
+ return err;
+
+ err = of_property_read_u32(node, "devbus,sync-enable",
+ &w->sync_enable);
+ if (err < 0) {
+ dev_err(devbus->dev,
+ "%s has no 'devbus,sync-enable' property\n",
+ node->full_name);
+ return err;
+ }
}
err = get_timing_param_ps(devbus, node, "devbus,ale-wr-ps",
- &w.ale_wr);
+ &w->ale_wr);
if (err < 0)
return err;
err = get_timing_param_ps(devbus, node, "devbus,wr-low-ps",
- &w.wr_low);
+ &w->wr_low);
if (err < 0)
return err;
err = get_timing_param_ps(devbus, node, "devbus,wr-high-ps",
- &w.wr_high);
+ &w->wr_high);
if (err < 0)
return err;
+ return 0;
+}
+
+static void devbus_orion_set_timing_params(struct devbus *devbus,
+ struct device_node *node,
+ struct devbus_read_params *r,
+ struct devbus_write_params *w)
+{
+ u32 value;
+
+ /*
+ * The hardware designers found it would be a good idea to
+ * split most of the values in the register into two fields:
+ * one containing all the low-order bits, and another one
+ * containing just the high-order bit. For all of those
+ * fields, we have to split the value into these two parts.
+ */
+ value = (r->turn_off & ORION_TURN_OFF_MASK) << ORION_TURN_OFF_SHIFT |
+ (r->acc_first & ORION_ACC_FIRST_MASK) << ORION_ACC_FIRST_SHIFT |
+ (r->acc_next & ORION_ACC_NEXT_MASK) << ORION_ACC_NEXT_SHIFT |
+ (w->ale_wr & ORION_ALE_WR_MASK) << ORION_ALE_WR_SHIFT |
+ (w->wr_low & ORION_WR_LOW_MASK) << ORION_WR_LOW_SHIFT |
+ (w->wr_high & ORION_WR_HIGH_MASK) << ORION_WR_HIGH_SHIFT |
+ r->bus_width << ORION_DEV_WIDTH_SHIFT |
+ ((r->turn_off & ORION_TURN_OFF_EXT_MASK) ? ORION_TURN_OFF_EXT_BIT : 0) |
+ ((r->acc_first & ORION_ACC_FIRST_EXT_MASK) ? ORION_ACC_FIRST_EXT_BIT : 0) |
+ ((r->acc_next & ORION_ACC_NEXT_EXT_MASK) ? ORION_ACC_NEXT_EXT_BIT : 0) |
+ ((w->ale_wr & ORION_ALE_WR_EXT_MASK) ? ORION_ALE_WR_EXT_BIT : 0) |
+ ((w->wr_low & ORION_WR_LOW_EXT_MASK) ? ORION_WR_LOW_EXT_BIT : 0) |
+ ((w->wr_high & ORION_WR_HIGH_EXT_MASK) ? ORION_WR_HIGH_EXT_BIT : 0) |
+ (r->badr_skew << ORION_BADR_SKEW_SHIFT) |
+ ORION_RESERVED;
+
+ writel(value, devbus->base);
+}
+
+static void devbus_armada_set_timing_params(struct devbus *devbus,
+ struct device_node *node,
+ struct devbus_read_params *r,
+ struct devbus_write_params *w)
+{
+ u32 value;
+
/* Set read timings */
- value = r.bus_width << DEV_WIDTH_BIT |
- r.badr_skew << BADR_SKEW_BIT |
- r.rd_hold << RD_HOLD_BIT |
- r.acc_next << ACC_NEXT_BIT |
- r.rd_setup << RD_SETUP_BIT |
- r.acc_first << ACC_FIRST_BIT |
- r.turn_off;
+ value = r->bus_width << ARMADA_DEV_WIDTH_SHIFT |
+ r->badr_skew << ARMADA_BADR_SKEW_SHIFT |
+ r->rd_hold << ARMADA_RD_HOLD_SHIFT |
+ r->acc_next << ARMADA_ACC_NEXT_SHIFT |
+ r->rd_setup << ARMADA_RD_SETUP_SHIFT |
+ r->acc_first << ARMADA_ACC_FIRST_SHIFT |
+ r->turn_off;
dev_dbg(devbus->dev, "read parameters register 0x%p = 0x%x\n",
- devbus->base + READ_PARAM_OFFSET,
+ devbus->base + ARMADA_READ_PARAM_OFFSET,
value);
- writel(value, devbus->base + READ_PARAM_OFFSET);
+ writel(value, devbus->base + ARMADA_READ_PARAM_OFFSET);
/* Set write timings */
- value = w.sync_enable << SYNC_ENABLE_BIT |
- w.wr_low << WR_LOW_BIT |
- w.wr_high << WR_HIGH_BIT |
- w.ale_wr;
+ value = w->sync_enable << ARMADA_SYNC_ENABLE_SHIFT |
+ w->wr_low << ARMADA_WR_LOW_SHIFT |
+ w->wr_high << ARMADA_WR_HIGH_SHIFT |
+ w->ale_wr;
dev_dbg(devbus->dev, "write parameters register: 0x%p = 0x%x\n",
- devbus->base + WRITE_PARAM_OFFSET,
+ devbus->base + ARMADA_WRITE_PARAM_OFFSET,
value);
- writel(value, devbus->base + WRITE_PARAM_OFFSET);
-
- return 0;
+ writel(value, devbus->base + ARMADA_WRITE_PARAM_OFFSET);
}
static int mvebu_devbus_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
struct device_node *node = pdev->dev.of_node;
+ struct devbus_read_params r;
+ struct devbus_write_params w;
struct devbus *devbus;
struct resource *res;
struct clk *clk;
rate = clk_get_rate(clk) / 1000;
devbus->tick_ps = 1000000000 / rate;
- /* Read the device tree node and set the new timing parameters */
- err = devbus_set_timing_params(devbus, node);
- if (err < 0)
- return err;
+ dev_dbg(devbus->dev, "Setting timing parameter, tick is %lu ps\n",
+ devbus->tick_ps);
+
+ if (!of_property_read_bool(node, "devbus,keep-config")) {
+ /* Read the Device Tree node */
+ err = devbus_get_timing_params(devbus, node, &r, &w);
+ if (err < 0)
+ return err;
+
+ /* Set the new timing parameters */
+ if (of_device_is_compatible(node, "marvell,orion-devbus"))
+ devbus_orion_set_timing_params(devbus, node, &r, &w);
+ else
+ devbus_armada_set_timing_params(devbus, node, &r, &w);
+ }
/*
* We need to create a child device explicitly from here to
static const struct of_device_id mvebu_devbus_of_match[] = {
{ .compatible = "marvell,mvebu-devbus" },
+ { .compatible = "marvell,orion-devbus" },
{},
};
MODULE_DEVICE_TABLE(of, mvebu_devbus_of_match);
projects / cascardo / linux.git / blobdiff