config LASI_82596
tristate "Lasi ethernet"
- depends on NET_ETHERNET && PARISC && GSC_LASI
+ depends on NET_ETHERNET && GSC
help
- Say Y here to support the on-board Intel 82596 ethernet controller
- built into Hewlett-Packard PA-RISC machines.
+ Say Y here to support the builtin Intel 82596 ethernet controller
+ found in Hewlett-Packard PA-RISC machines with 10Mbit ethernet.
config MIPS_JAZZ_SONIC
tristate "MIPS JAZZ onboard SONIC Ethernet support"
enables offloading for checksums on transmit. If unsure, say Y.
config MIPS_SIM_NET
- tristate "MIPS simulator Network device (EXPERIMENTAL)"
- depends on MIPS_SIM && EXPERIMENTAL
+ tristate "MIPS simulator Network device"
+ depends on NET_ETHERNET && MIPS_SIM
help
The MIPSNET device is a simple Ethernet network device which is
emulated by the MIPS Simulator.
will be called pcnet32.
config PCNET32_NAPI
- bool "Use RX polling (NAPI) (EXPERIMENTAL)"
- depends on PCNET32 && EXPERIMENTAL
+ bool "Use RX polling (NAPI)"
+ depends on PCNET32
help
NAPI is a new driver API designed to reduce CPU and interrupt load
when the driver is receiving lots of packets from the card. It is
config TC35815
tristate "TOSHIBA TC35815 Ethernet support"
- depends on NET_PCI && PCI && TOSHIBA_JMR3927
+ depends on NET_PCI && PCI && MIPS
+ select MII
config DGRS
tristate "Digi Intl. RightSwitch SE-X support"
will be called sky2. This is recommended.
config SK98LIN
- tristate "Marvell Yukon Chipset / SysKonnect SK-98xx Support"
+ tristate "Marvell Yukon Chipset / SysKonnect SK-98xx Support (DEPRECATED)"
depends on PCI
---help---
Say Y here if you have a Marvell Yukon or SysKonnect SK-98xx/SK-95xx
compliant Gigabit Ethernet Adapter.
- This driver supports the original Yukon chipset. A cleaner driver is
- also available (skge) which seems to work better than this one.
+ This driver supports the original Yukon chipset. This driver is
+ deprecated and will be removed from the kernel in the near future,
+ it has been replaced by the skge driver. skge is cleaner and
+ seems to work better.
This driver does not support the newer Yukon2 chipset. A separate
driver, sky2, is provided to support Yukon2-based adapters.
config SPIDER_NET
tristate "Spider Gigabit Ethernet driver"
- depends on PCI && PPC_IBM_CELL_BLADE
+ depends on PCI && (PPC_IBM_CELL_BLADE || PPC_CELLEB)
select FW_LOADER
help
This driver supports the Gigabit Ethernet chips present on the
tristate "Gianfar Ethernet"
depends on 85xx || 83xx || PPC_86xx
select PHYLIB
+ select CRC32
help
This driver supports the Gigabit TSEC on the MPC83xx, MPC85xx,
and MPC86xx family of chips, and the FEC on the 8540.
bool "Mac address filtering support"
depends on UCC_GETH
-config UGETH_TX_ON_DEMOND
- bool "Transmit on Demond support"
+config UGETH_TX_ON_DEMAND
+ bool "Transmit on Demand support"
depends on UCC_GETH
-config UGETH_HAS_GIGA
- bool
- depends on UCC_GETH && PPC_MPC836x
-
config MV643XX_ETH
tristate "MV-643XX Ethernet support"
depends on MOMENCO_OCELOT_C || MOMENCO_JAGUAR_ATX || MV64360 || MOMENCO_OCELOT_3 || (PPC_MULTIPLATFORM && PPC32)
chipset which is used in the Momenco Ocelot C and Jaguar ATX and
Pegasos II, amongst other PPC and MIPS boards.
-config MV643XX_ETH_0
- bool "MV-643XX Port 0"
- depends on MV643XX_ETH
- help
- This enables support for Port 0 of the Marvell MV643XX Gigabit
- Ethernet.
-
-config MV643XX_ETH_1
- bool "MV-643XX Port 1"
- depends on MV643XX_ETH
- help
- This enables support for Port 1 of the Marvell MV643XX Gigabit
- Ethernet.
-
-config MV643XX_ETH_2
- bool "MV-643XX Port 2"
- depends on MV643XX_ETH
- help
- This enables support for Port 2 of the Marvell MV643XX Gigabit
- Ethernet.
-
config QLA3XXX
tristate "QLogic QLA3XXX Network Driver Support"
depends on PCI
To compile this driver as a module, choose M here: the module
will be called qla3xxx.
+config ATL1
+ tristate "Attansic L1 Gigabit Ethernet support (EXPERIMENTAL)"
+ depends on PCI && EXPERIMENTAL
+ select CRC32
+ select MII
+ help
+ This driver supports the Attansic L1 gigabit ethernet adapter.
+
+ To compile this driver as a module, choose M here. The module
+ will be called atl1.
+
endmenu
#
when the driver is receiving lots of packets from the card.
config CHELSIO_T3
- tristate "Chelsio Communications T3 10Gb Ethernet support"
- depends on PCI
- help
- This driver supports Chelsio T3-based gigabit and 10Gb Ethernet
- adapters.
+ tristate "Chelsio Communications T3 10Gb Ethernet support"
+ depends on PCI
+ select FW_LOADER
+ help
+ This driver supports Chelsio T3-based gigabit and 10Gb Ethernet
+ adapters.
- For general information about Chelsio and our products, visit
- our website at <http://www.chelsio.com>.
+ For general information about Chelsio and our products, visit
+ our website at <http://www.chelsio.com>.
- For customer support, please visit our customer support page at
- <http://www.chelsio.com/support.htm>.
+ For customer support, please visit our customer support page at
+ <http://www.chelsio.com/support.htm>.
- Please send feedback to <linux-bugs@chelsio.com>.
+ Please send feedback to <linux-bugs@chelsio.com>.
- To compile this driver as a module, choose M here: the module
- will be called cxgb3.
+ To compile this driver as a module, choose M here: the module
+ will be called cxgb3.
config EHEA
tristate "eHEA Ethernet support"
config FDDI
bool "FDDI driver support"
- depends on (PCI || EISA)
+ depends on (PCI || EISA || TC)
help
Fiber Distributed Data Interface is a high speed local area network
design; essentially a replacement for high speed Ethernet. FDDI can
will say N.
config DEFXX
- tristate "Digital DEFEA and DEFPA adapter support"
- depends on FDDI && (PCI || EISA)
- help
- This is support for the DIGITAL series of EISA (DEFEA) and PCI
- (DEFPA) controllers which can connect you to a local FDDI network.
+ tristate "Digital DEFTA/DEFEA/DEFPA adapter support"
+ depends on FDDI && (PCI || EISA || TC)
+ ---help---
+ This is support for the DIGITAL series of TURBOchannel (DEFTA),
+ EISA (DEFEA) and PCI (DEFPA) controllers which can connect you
+ to a local FDDI network.
+
+ To compile this driver as a module, choose M here: the module
+ will be called defxx. If unsure, say N.
+
+config DEFXX_MMIO
+ bool
+ prompt "Use MMIO instead of PIO" if PCI || EISA
+ depends on DEFXX
+ default n if PCI || EISA
+ default y
+ ---help---
+ This instructs the driver to use EISA or PCI memory-mapped I/O
+ (MMIO) as appropriate instead of programmed I/O ports (PIO).
+ Enabling this gives an improvement in processing time in parts
+ of the driver, but it may cause problems with EISA (DEFEA)
+ adapters. TURBOchannel does not have the concept of I/O ports,
+ so MMIO is always used for these (DEFTA) adapters.
+
+ If unsure, say N.
config SKFP
tristate "SysKonnect FDDI PCI support"