static void bnx2x_save_848xx_spirom_version(struct bnx2x_phy *phy,
struct link_params *params)
{
- u16 val, fw_ver1, fw_ver2, cnt;
+ u16 val, fw_ver1, fw_ver2, cnt, adj;
struct bnx2x *bp = params->bp;
+ adj = 0;
+ if (phy->type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM84833)
+ adj = -1;
+
/* For the 32 bits registers in 848xx, access via MDIO2ARM interface.*/
/* (1) set register 0xc200_0014(SPI_BRIDGE_CTRL_2) to 0x03000000 */
- bnx2x_cl45_write(bp, phy, MDIO_PMA_DEVAD, 0xA819, 0x0014);
- bnx2x_cl45_write(bp, phy, MDIO_PMA_DEVAD, 0xA81A, 0xc200);
- bnx2x_cl45_write(bp, phy, MDIO_PMA_DEVAD, 0xA81B, 0x0000);
- bnx2x_cl45_write(bp, phy, MDIO_PMA_DEVAD, 0xA81C, 0x0300);
- bnx2x_cl45_write(bp, phy, MDIO_PMA_DEVAD, 0xA817, 0x0009);
+ bnx2x_cl45_write(bp, phy, MDIO_PMA_DEVAD, 0xA819 + adj, 0x0014);
+ bnx2x_cl45_write(bp, phy, MDIO_PMA_DEVAD, 0xA81A + adj, 0xc200);
+ bnx2x_cl45_write(bp, phy, MDIO_PMA_DEVAD, 0xA81B + adj, 0x0000);
+ bnx2x_cl45_write(bp, phy, MDIO_PMA_DEVAD, 0xA81C + adj, 0x0300);
+ bnx2x_cl45_write(bp, phy, MDIO_PMA_DEVAD, 0xA817 + adj, 0x0009);
for (cnt = 0; cnt < 100; cnt++) {
- bnx2x_cl45_read(bp, phy, MDIO_PMA_DEVAD, 0xA818, &val);
+ bnx2x_cl45_read(bp, phy, MDIO_PMA_DEVAD, 0xA818 + adj, &val);
if (val & 1)
break;
udelay(5);
/* 2) read register 0xc200_0000 (SPI_FW_STATUS) */
- bnx2x_cl45_write(bp, phy, MDIO_PMA_DEVAD, 0xA819, 0x0000);
- bnx2x_cl45_write(bp, phy, MDIO_PMA_DEVAD, 0xA81A, 0xc200);
- bnx2x_cl45_write(bp, phy, MDIO_PMA_DEVAD, 0xA817, 0x000A);
+ bnx2x_cl45_write(bp, phy, MDIO_PMA_DEVAD, 0xA819 + adj, 0x0000);
+ bnx2x_cl45_write(bp, phy, MDIO_PMA_DEVAD, 0xA81A + adj, 0xc200);
+ bnx2x_cl45_write(bp, phy, MDIO_PMA_DEVAD, 0xA817 + adj, 0x000A);
for (cnt = 0; cnt < 100; cnt++) {
- bnx2x_cl45_read(bp, phy, MDIO_PMA_DEVAD, 0xA818, &val);
+ bnx2x_cl45_read(bp, phy, MDIO_PMA_DEVAD, 0xA818 + adj, &val);
if (val & 1)
break;
udelay(5);
}
/* lower 16 bits of the register SPI_FW_STATUS */
- bnx2x_cl45_read(bp, phy, MDIO_PMA_DEVAD, 0xA81B, &fw_ver1);
+ bnx2x_cl45_read(bp, phy, MDIO_PMA_DEVAD, 0xA81B + adj, &fw_ver1);
/* upper 16 bits of register SPI_FW_STATUS */
- bnx2x_cl45_read(bp, phy, MDIO_PMA_DEVAD, 0xA81C, &fw_ver2);
+ bnx2x_cl45_read(bp, phy, MDIO_PMA_DEVAD, 0xA81C + adj, &fw_ver2);
bnx2x_save_spirom_version(bp, params->port, (fw_ver2<<16) | fw_ver1,
phy->ver_addr);
static void bnx2x_848xx_set_led(struct bnx2x *bp,
struct bnx2x_phy *phy)
{
- u16 val;
+ u16 val, adj;
+
+ adj = 0;
+ if (phy->type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM84833)
+ adj = -1;
/* PHYC_CTL_LED_CTL */
bnx2x_cl45_read(bp, phy,
MDIO_PMA_DEVAD,
- MDIO_PMA_REG_8481_LINK_SIGNAL, &val);
+ MDIO_PMA_REG_8481_LINK_SIGNAL + adj, &val);
val &= 0xFE00;
val |= 0x0092;
bnx2x_cl45_write(bp, phy,
MDIO_PMA_DEVAD,
- MDIO_PMA_REG_8481_LINK_SIGNAL, val);
+ MDIO_PMA_REG_8481_LINK_SIGNAL + adj, val);
bnx2x_cl45_write(bp, phy,
MDIO_PMA_DEVAD,
- MDIO_PMA_REG_8481_LED1_MASK,
+ MDIO_PMA_REG_8481_LED1_MASK + adj,
0x80);
bnx2x_cl45_write(bp, phy,
MDIO_PMA_DEVAD,
- MDIO_PMA_REG_8481_LED2_MASK,
+ MDIO_PMA_REG_8481_LED2_MASK + adj,
0x18);
/* Select activity source by Tx and Rx, as suggested by PHY AE */
bnx2x_cl45_write(bp, phy,
MDIO_PMA_DEVAD,
- MDIO_PMA_REG_8481_LED3_MASK,
+ MDIO_PMA_REG_8481_LED3_MASK + adj,
0x0006);
/* Select the closest activity blink rate to that in 10/100/1000 */
bnx2x_cl45_write(bp, phy,
MDIO_PMA_DEVAD,
- MDIO_PMA_REG_8481_LED3_BLINK,
+ MDIO_PMA_REG_8481_LED3_BLINK + adj,
0);
bnx2x_cl45_read(bp, phy,
MDIO_PMA_DEVAD,
- MDIO_PMA_REG_84823_CTL_LED_CTL_1, &val);
+ MDIO_PMA_REG_84823_CTL_LED_CTL_1 + adj, &val);
val |= MDIO_PMA_REG_84823_LED3_STRETCH_EN; /* stretch_en for LED3*/
bnx2x_cl45_write(bp, phy,
MDIO_PMA_DEVAD,
- MDIO_PMA_REG_84823_CTL_LED_CTL_1, val);
+ MDIO_PMA_REG_84823_CTL_LED_CTL_1 + adj, val);
/* 'Interrupt Mask' */
bnx2x_cl45_write(bp, phy,
{
struct bnx2x *bp = params->bp;
u8 port, initialize = 1;
- u16 val;
+ u16 val, adj;
u16 temp;
u32 actual_phy_selection;
u8 rc = 0;
/* This is just for MDIO_CTL_REG_84823_MEDIA register. */
+ adj = 0;
+ if (phy->type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM84833)
+ adj = 3;
msleep(1);
if (CHIP_IS_E2(bp))
/* Set dual-media configuration according to configuration */
bnx2x_cl45_read(bp, phy, MDIO_CTL_DEVAD,
- MDIO_CTL_REG_84823_MEDIA, &val);
+ MDIO_CTL_REG_84823_MEDIA + adj, &val);
val &= ~(MDIO_CTL_REG_84823_MEDIA_MAC_MASK |
MDIO_CTL_REG_84823_MEDIA_LINE_MASK |
MDIO_CTL_REG_84823_MEDIA_COPPER_CORE_DOWN |
val |= MDIO_CTL_REG_84823_MEDIA_FIBER_1G;
bnx2x_cl45_write(bp, phy, MDIO_CTL_DEVAD,
- MDIO_CTL_REG_84823_MEDIA, val);
+ MDIO_CTL_REG_84823_MEDIA + adj, val);
DP(NETIF_MSG_LINK, "Multi_phy config = 0x%x, Media control = 0x%x\n",
params->multi_phy_config, val);
struct link_vars *vars)
{
struct bnx2x *bp = params->bp;
- u16 val, val1, val2;
+ u16 val, val1, val2, adj;
u8 link_up = 0;
+ /* Reg offset adjustment for 84833 */
+ adj = 0;
+ if (phy->type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM84833)
+ adj = -1;
+
/* Check 10G-BaseT link status */
/* Check PMD signal ok */
bnx2x_cl45_read(bp, phy,
MDIO_AN_DEVAD, 0xFFFA, &val1);
bnx2x_cl45_read(bp, phy,
- MDIO_PMA_DEVAD, MDIO_PMA_REG_8481_PMD_SIGNAL,
+ MDIO_PMA_DEVAD, MDIO_PMA_REG_8481_PMD_SIGNAL + adj,
&val2);
DP(NETIF_MSG_LINK, "BCM848xx: PMD_SIGNAL 1.a811 = 0x%x\n", val2);
.phy_specific_func = (phy_specific_func_t)NULL
};
+static struct bnx2x_phy phy_84833 = {
+ .type = PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM84833,
+ .addr = 0xff,
+ .flags = FLAGS_FAN_FAILURE_DET_REQ |
+ FLAGS_REARM_LATCH_SIGNAL,
+ .def_md_devad = 0,
+ .reserved = 0,
+ .rx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff},
+ .tx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff},
+ .mdio_ctrl = 0,
+ .supported = (SUPPORTED_10baseT_Half |
+ SUPPORTED_10baseT_Full |
+ SUPPORTED_100baseT_Half |
+ SUPPORTED_100baseT_Full |
+ SUPPORTED_1000baseT_Full |
+ SUPPORTED_10000baseT_Full |
+ SUPPORTED_TP |
+ SUPPORTED_Autoneg |
+ SUPPORTED_Pause |
+ SUPPORTED_Asym_Pause),
+ .media_type = ETH_PHY_BASE_T,
+ .ver_addr = 0,
+ .req_flow_ctrl = 0,
+ .req_line_speed = 0,
+ .speed_cap_mask = 0,
+ .req_duplex = 0,
+ .rsrv = 0,
+ .config_init = (config_init_t)bnx2x_848x3_config_init,
+ .read_status = (read_status_t)bnx2x_848xx_read_status,
+ .link_reset = (link_reset_t)bnx2x_848x3_link_reset,
+ .config_loopback = (config_loopback_t)NULL,
+ .format_fw_ver = (format_fw_ver_t)bnx2x_848xx_format_ver,
+ .hw_reset = (hw_reset_t)NULL,
+ .set_link_led = (set_link_led_t)bnx2x_848xx_set_link_led,
+ .phy_specific_func = (phy_specific_func_t)NULL
+};
+
/*****************************************************************/
/* */
/* Populate the phy according. Main function: bnx2x_populate_phy */
case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM84823:
*phy = phy_84823;
break;
+ case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM84833:
+ *phy = phy_84833;
+ break;
case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_SFX7101:
*phy = phy_7101;
break;
projects / cascardo / linux.git / blobdiff