-/* Intel Ethernet Switch Host Interface Driver
- * Copyright(c) 2013 - 2015 Intel Corporation.
+/* Intel(R) Ethernet Switch Host Interface Driver
+ * Copyright(c) 2013 - 2016 Intel Corporation.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms and conditions of the GNU General Public License,
#include "fm10k.h"
#include <linux/vmalloc.h>
-#ifdef CONFIG_FM10K_VXLAN
-#include <net/vxlan.h>
-#endif /* CONFIG_FM10K_VXLAN */
+#include <net/udp_tunnel.h>
/**
* fm10k_setup_tx_resources - allocate Tx resources (Descriptors)
for (i = 0; i < interface->num_tx_queues; i++)
fm10k_clean_tx_ring(interface->tx_ring[i]);
-
- /* remove any stale timestamp buffers and free them */
- skb_queue_purge(&interface->ts_tx_skb_queue);
}
/**
/**
* fm10k_add_vxlan_port
* @netdev: network interface device structure
- * @sa_family: Address family of new port
- * @port: port number used for VXLAN
+ * @ti: Tunnel endpoint information
*
- * This funciton is called when a new VXLAN interface has added a new port
+ * This function is called when a new VXLAN interface has added a new port
* number to the range that is currently in use for VXLAN. The new port
* number is always added to the tail so that the port number list should
* match the order in which the ports were allocated. The head of the list
* is always used as the VXLAN port number for offloads.
**/
static void fm10k_add_vxlan_port(struct net_device *dev,
- sa_family_t sa_family, __be16 port) {
+ struct udp_tunnel_info *ti)
+{
struct fm10k_intfc *interface = netdev_priv(dev);
struct fm10k_vxlan_port *vxlan_port;
+ if (ti->type != UDP_TUNNEL_TYPE_VXLAN)
+ return;
/* only the PF supports configuring tunnels */
if (interface->hw.mac.type != fm10k_mac_pf)
return;
/* existing ports are pulled out so our new entry is always last */
fm10k_vxlan_port_for_each(vxlan_port, interface) {
- if ((vxlan_port->port == port) &&
- (vxlan_port->sa_family == sa_family)) {
+ if ((vxlan_port->port == ti->port) &&
+ (vxlan_port->sa_family == ti->sa_family)) {
list_del(&vxlan_port->list);
goto insert_tail;
}
vxlan_port = kmalloc(sizeof(*vxlan_port), GFP_ATOMIC);
if (!vxlan_port)
return;
- vxlan_port->port = port;
- vxlan_port->sa_family = sa_family;
+ vxlan_port->port = ti->port;
+ vxlan_port->sa_family = ti->sa_family;
insert_tail:
/* add new port value to list */
/**
* fm10k_del_vxlan_port
* @netdev: network interface device structure
- * @sa_family: Address family of freed port
- * @port: port number used for VXLAN
+ * @ti: Tunnel endpoint information
*
- * This funciton is called when a new VXLAN interface has freed a port
+ * This function is called when a new VXLAN interface has freed a port
* number from the range that is currently in use for VXLAN. The freed
* port is removed from the list and the new head is used to determine
* the port number for offloads.
**/
static void fm10k_del_vxlan_port(struct net_device *dev,
- sa_family_t sa_family, __be16 port) {
+ struct udp_tunnel_info *ti)
+{
struct fm10k_intfc *interface = netdev_priv(dev);
struct fm10k_vxlan_port *vxlan_port;
+ if (ti->type != UDP_TUNNEL_TYPE_VXLAN)
+ return;
if (interface->hw.mac.type != fm10k_mac_pf)
return;
/* find the port in the list and free it */
fm10k_vxlan_port_for_each(vxlan_port, interface) {
- if ((vxlan_port->port == port) &&
- (vxlan_port->sa_family == sa_family)) {
+ if ((vxlan_port->port == ti->port) &&
+ (vxlan_port->sa_family == ti->sa_family)) {
list_del(&vxlan_port->list);
kfree(vxlan_port);
break;
if (err)
goto err_set_queues;
-#ifdef CONFIG_FM10K_VXLAN
/* update VXLAN port configuration */
- vxlan_get_rx_port(netdev);
-#endif
+ udp_tunnel_get_rx_info(netdev);
fm10k_up(interface);
__skb_put(skb, pad_len);
}
- /* prepare packet for hardware time stamping */
- if (unlikely(skb_shinfo(skb)->tx_flags & SKBTX_HW_TSTAMP))
- fm10k_ts_tx_enqueue(interface, skb);
-
if (r_idx >= interface->num_tx_queues)
r_idx %= interface->num_tx_queues;
return -EADDRNOTAVAIL;
/* update table with current entries */
- for (vid = hw->mac.default_vid ? fm10k_find_next_vlan(interface, 0) : 0;
+ for (vid = hw->mac.default_vid ? fm10k_find_next_vlan(interface, 0) : 1;
vid < VLAN_N_VID;
vid = fm10k_find_next_vlan(interface, vid)) {
err = hw->mac.ops.update_uc_addr(hw, glort, addr,
u16 vid, glort = interface->glort;
/* update table with current entries */
- for (vid = hw->mac.default_vid ? fm10k_find_next_vlan(interface, 0) : 0;
+ for (vid = hw->mac.default_vid ? fm10k_find_next_vlan(interface, 0) : 1;
vid < VLAN_N_VID;
vid = fm10k_find_next_vlan(interface, vid)) {
hw->mac.ops.update_mc_addr(hw, glort, addr, vid, sync);
}
/* synchronize all of the addresses */
- if (xcast_mode != FM10K_XCAST_MODE_PROMISC) {
- __dev_uc_sync(dev, fm10k_uc_sync, fm10k_uc_unsync);
- if (xcast_mode != FM10K_XCAST_MODE_ALLMULTI)
- __dev_mc_sync(dev, fm10k_mc_sync, fm10k_mc_unsync);
- }
+ __dev_uc_sync(dev, fm10k_uc_sync, fm10k_uc_unsync);
+ __dev_mc_sync(dev, fm10k_mc_sync, fm10k_mc_unsync);
fm10k_mbx_unlock(interface);
}
hw->mac.ops.update_vlan(hw, 0, 0, true);
/* update table with current entries */
- for (vid = hw->mac.default_vid ? fm10k_find_next_vlan(interface, 0) : 0;
+ for (vid = hw->mac.default_vid ? fm10k_find_next_vlan(interface, 0) : 1;
vid < VLAN_N_VID;
vid = fm10k_find_next_vlan(interface, vid)) {
hw->mac.ops.update_vlan(hw, vid, 0, true);
hw->mac.ops.update_xcast_mode(hw, glort, xcast_mode);
/* synchronize all of the addresses */
- if (xcast_mode != FM10K_XCAST_MODE_PROMISC) {
- __dev_uc_sync(netdev, fm10k_uc_sync, fm10k_uc_unsync);
- if (xcast_mode != FM10K_XCAST_MODE_ALLMULTI)
- __dev_mc_sync(netdev, fm10k_mc_sync, fm10k_mc_unsync);
- }
+ __dev_uc_sync(netdev, fm10k_uc_sync, fm10k_uc_unsync);
+ __dev_mc_sync(netdev, fm10k_mc_sync, fm10k_mc_unsync);
fm10k_mbx_unlock(interface);
return fm10k_setup_tc(dev, tc->tc);
}
-static int fm10k_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd)
-{
- switch (cmd) {
- case SIOCGHWTSTAMP:
- return fm10k_get_ts_config(netdev, ifr);
- case SIOCSHWTSTAMP:
- return fm10k_set_ts_config(netdev, ifr);
- default:
- return -EOPNOTSUPP;
- }
-}
-
static void fm10k_assign_l2_accel(struct fm10k_intfc *interface,
struct fm10k_l2_accel *l2_accel)
{
.ndo_set_vf_vlan = fm10k_ndo_set_vf_vlan,
.ndo_set_vf_rate = fm10k_ndo_set_vf_bw,
.ndo_get_vf_config = fm10k_ndo_get_vf_config,
- .ndo_add_vxlan_port = fm10k_add_vxlan_port,
- .ndo_del_vxlan_port = fm10k_del_vxlan_port,
- .ndo_do_ioctl = fm10k_ioctl,
+ .ndo_udp_tunnel_add = fm10k_add_vxlan_port,
+ .ndo_udp_tunnel_del = fm10k_del_vxlan_port,
.ndo_dfwd_add_station = fm10k_dfwd_add_station,
.ndo_dfwd_del_station = fm10k_dfwd_del_station,
#ifdef CONFIG_NET_POLL_CONTROLLER
/* configure default debug level */
interface = netdev_priv(dev);
- interface->msg_enable = (1 << DEFAULT_DEBUG_LEVEL_SHIFT) - 1;
+ interface->msg_enable = BIT(DEFAULT_DEBUG_LEVEL_SHIFT) - 1;
/* configure default features */
dev->features |= NETIF_F_IP_CSUM |