static s32 ixgbe_identify_phy_x550em(struct ixgbe_hw *hw)
{
switch (hw->device_id) {
+ case IXGBE_DEV_ID_X550EM_A_SFP:
+ if (hw->bus.lan_id)
+ hw->phy.phy_semaphore_mask = IXGBE_GSSR_PHY1_SM;
+ else
+ hw->phy.phy_semaphore_mask = IXGBE_GSSR_PHY0_SM;
+ return ixgbe_identify_module_generic(hw);
case IXGBE_DEV_ID_X550EM_X_SFP:
/* set up for CS4227 usage */
hw->phy.phy_semaphore_mask = IXGBE_GSSR_SHARED_I2C_SM;
return status;
}
+/**
+ * ixgbe_setup_mac_link_sfp_n - Setup internal PHY for native SFP
+ * @hw: pointer to hardware structure
+ *
+ * Configure the the integrated PHY for native SFP support.
+ */
+static s32
+ixgbe_setup_mac_link_sfp_n(struct ixgbe_hw *hw, ixgbe_link_speed speed,
+ __always_unused bool autoneg_wait_to_complete)
+{
+ bool setup_linear = false;
+ u32 reg_phy_int;
+ s32 rc;
+
+ /* Check if SFP module is supported and linear */
+ rc = ixgbe_supported_sfp_modules_X550em(hw, &setup_linear);
+
+ /* If no SFP module present, then return success. Return success since
+ * SFP not present error is not excepted in the setup MAC link flow.
+ */
+ if (rc == IXGBE_ERR_SFP_NOT_PRESENT)
+ return 0;
+
+ if (!rc)
+ return rc;
+
+ /* Configure internal PHY for native SFI */
+ rc = hw->mac.ops.read_iosf_sb_reg(hw,
+ IXGBE_KRM_AN_CNTL_8(hw->bus.lan_id),
+ IXGBE_SB_IOSF_TARGET_KR_PHY,
+ ®_phy_int);
+ if (rc)
+ return rc;
+
+ if (setup_linear) {
+ reg_phy_int &= ~IXGBE_KRM_AN_CNTL_8_LIMITING;
+ reg_phy_int |= IXGBE_KRM_AN_CNTL_8_LINEAR;
+ } else {
+ reg_phy_int |= IXGBE_KRM_AN_CNTL_8_LIMITING;
+ reg_phy_int &= ~IXGBE_KRM_AN_CNTL_8_LINEAR;
+ }
+
+ rc = hw->mac.ops.write_iosf_sb_reg(hw,
+ IXGBE_KRM_AN_CNTL_8(hw->bus.lan_id),
+ IXGBE_SB_IOSF_TARGET_KR_PHY,
+ reg_phy_int);
+ if (rc)
+ return rc;
+
+ /* Setup XFI/SFI internal link */
+ return ixgbe_setup_ixfi_x550em(hw, &speed);
+}
+
+/**
+ * ixgbe_setup_mac_link_sfp_x550a - Setup internal PHY for SFP
+ * @hw: pointer to hardware structure
+ *
+ * Configure the the integrated PHY for SFP support.
+ */
+static s32
+ixgbe_setup_mac_link_sfp_x550a(struct ixgbe_hw *hw, ixgbe_link_speed speed,
+ __always_unused bool autoneg_wait_to_complete)
+{
+ u32 reg_slice, slice_offset;
+ bool setup_linear = false;
+ u16 reg_phy_ext;
+ s32 rc;
+
+ /* Check if SFP module is supported and linear */
+ rc = ixgbe_supported_sfp_modules_X550em(hw, &setup_linear);
+
+ /* If no SFP module present, then return success. Return success since
+ * SFP not present error is not excepted in the setup MAC link flow.
+ */
+ if (rc == IXGBE_ERR_SFP_NOT_PRESENT)
+ return 0;
+
+ if (!rc)
+ return rc;
+
+ /* Configure internal PHY for KR/KX. */
+ ixgbe_setup_kr_speed_x550em(hw, speed);
+
+ if (!hw->phy.mdio.prtad || hw->phy.mdio.prtad == 0xFFFF)
+ return IXGBE_ERR_PHY_ADDR_INVALID;
+
+ /* Get external PHY device id */
+ rc = hw->phy.ops.read_reg(hw, IXGBE_CS4227_GLOBAL_ID_MSB,
+ IXGBE_MDIO_ZERO_DEV_TYPE, ®_phy_ext);
+ if (rc)
+ return rc;
+
+ /* When configuring quad port CS4223, the MAC instance is part
+ * of the slice offset.
+ */
+ if (reg_phy_ext == IXGBE_CS4223_PHY_ID)
+ slice_offset = (hw->bus.lan_id +
+ (hw->bus.instance_id << 1)) << 12;
+ else
+ slice_offset = hw->bus.lan_id << 12;
+
+ /* Configure CS4227/CS4223 LINE side to proper mode. */
+ reg_slice = IXGBE_CS4227_LINE_SPARE24_LSB + slice_offset;
+ if (setup_linear)
+ reg_phy_ext = (IXGBE_CS4227_EDC_MODE_CX1 << 1) | 1;
+ else
+ reg_phy_ext = (IXGBE_CS4227_EDC_MODE_SR << 1) | 1;
+ return hw->phy.ops.write_reg(hw, reg_slice, IXGBE_MDIO_ZERO_DEV_TYPE,
+ reg_phy_ext);
+}
+
/**
* ixgbe_setup_mac_link_t_X550em - Sets the auto advertised link speed
* @hw: pointer to hardware structure
mac->ops.disable_tx_laser = NULL;
mac->ops.enable_tx_laser = NULL;
mac->ops.flap_tx_laser = NULL;
- mac->ops.setup_mac_link = ixgbe_setup_mac_link_sfp_x550em;
mac->ops.setup_link = ixgbe_setup_mac_link_multispeed_fiber;
mac->ops.setup_fc = ixgbe_setup_fc_x550em;
+ switch (hw->device_id) {
+ case IXGBE_DEV_ID_X550EM_A_SFP_N:
+ mac->ops.setup_mac_link = ixgbe_setup_mac_link_sfp_n;
+ break;
+ case IXGBE_DEV_ID_X550EM_A_SFP:
+ mac->ops.setup_mac_link =
+ ixgbe_setup_mac_link_sfp_x550a;
+ break;
+ default:
+ mac->ops.setup_mac_link =
+ ixgbe_setup_mac_link_sfp_x550em;
+ break;
+ }
mac->ops.set_rate_select_speed =
ixgbe_set_soft_rate_select_speed;
break;
media_type = ixgbe_media_type_backplane;
break;
case IXGBE_DEV_ID_X550EM_X_SFP:
+ case IXGBE_DEV_ID_X550EM_A_SFP:
case IXGBE_DEV_ID_X550EM_A_SFP_N:
media_type = ixgbe_media_type_fiber;
break;
switch (hw->device_id) {
case IXGBE_DEV_ID_X550EM_X_10G_T:
+ case IXGBE_DEV_ID_X550EM_A_SFP:
/* Config MDIO clock speed before the first MDIO PHY access */
hlreg0 = IXGBE_READ_REG(hw, IXGBE_HLREG0);
hlreg0 &= ~IXGBE_HLREG0_MDCSPD;
projects / cascardo / linux.git / blobdiff