/*
* drivers/net/ethernet/mellanox/mlxsw/reg.h
* Copyright (c) 2015 Mellanox Technologies. All rights reserved.
- * Copyright (c) 2015 Ido Schimmel <idosch@mellanox.com>
+ * Copyright (c) 2015-2016 Ido Schimmel <idosch@mellanox.com>
* Copyright (c) 2015 Elad Raz <eladr@mellanox.com>
- * Copyright (c) 2015 Jiri Pirko <jiri@mellanox.com>
+ * Copyright (c) 2015-2016 Jiri Pirko <jiri@mellanox.com>
+ * Copyright (c) 2016 Yotam Gigi <yotamg@mellanox.com>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
/* forward and trap, trap_id is FDB_TRAP */
MLXSW_REG_SFD_REC_ACTION_MIRROR_TO_CPU = 1,
/* trap and do not forward, trap_id is FDB_TRAP */
- MLXSW_REG_SFD_REC_ACTION_TRAP = 3,
+ MLXSW_REG_SFD_REC_ACTION_TRAP = 2,
+ /* forward to IP router */
+ MLXSW_REG_SFD_REC_ACTION_FORWARD_IP_ROUTER = 3,
MLXSW_REG_SFD_REC_ACTION_DISCARD_ERROR = 15,
};
enum mlxsw_reg_ppcnt_grp {
MLXSW_REG_PPCNT_IEEE_8023_CNT = 0x0,
MLXSW_REG_PPCNT_PRIO_CNT = 0x10,
+ MLXSW_REG_PPCNT_TC_CNT = 0x11,
};
/* reg_ppcnt_grp
*/
MLXSW_ITEM64(reg, ppcnt, tx_pause_transition, 0x08 + 0x70, 0, 64);
+/* Ethernet Per Traffic Group Counters */
+
+/* reg_ppcnt_tc_transmit_queue
+ * Contains the transmit queue depth in cells of traffic class
+ * selected by prio_tc and the port selected by local_port.
+ * The field cannot be cleared.
+ * Access: RO
+ */
+MLXSW_ITEM64(reg, ppcnt, tc_transmit_queue, 0x08 + 0x00, 0, 64);
+
+/* reg_ppcnt_tc_no_buffer_discard_uc
+ * The number of unicast packets dropped due to lack of shared
+ * buffer resources.
+ * Access: RO
+ */
+MLXSW_ITEM64(reg, ppcnt, tc_no_buffer_discard_uc, 0x08 + 0x08, 0, 64);
+
static inline void mlxsw_reg_ppcnt_pack(char *payload, u8 local_port,
enum mlxsw_reg_ppcnt_grp grp,
u8 prio_tc)
mlxsw_reg_hpkt_ctrl_set(payload, MLXSW_REG_HPKT_CTRL_PACKET_DEFAULT);
}
+/* RGCR - Router General Configuration Register
+ * --------------------------------------------
+ * The register is used for setting up the router configuration.
+ */
+#define MLXSW_REG_RGCR_ID 0x8001
+#define MLXSW_REG_RGCR_LEN 0x28
+
+static const struct mlxsw_reg_info mlxsw_reg_rgcr = {
+ .id = MLXSW_REG_RGCR_ID,
+ .len = MLXSW_REG_RGCR_LEN,
+};
+
+/* reg_rgcr_ipv4_en
+ * IPv4 router enable.
+ * Access: RW
+ */
+MLXSW_ITEM32(reg, rgcr, ipv4_en, 0x00, 31, 1);
+
+/* reg_rgcr_ipv6_en
+ * IPv6 router enable.
+ * Access: RW
+ */
+MLXSW_ITEM32(reg, rgcr, ipv6_en, 0x00, 30, 1);
+
+/* reg_rgcr_max_router_interfaces
+ * Defines the maximum number of active router interfaces for all virtual
+ * routers.
+ * Access: RW
+ */
+MLXSW_ITEM32(reg, rgcr, max_router_interfaces, 0x10, 0, 16);
+
+/* reg_rgcr_usp
+ * Update switch priority and packet color.
+ * 0 - Preserve the value of Switch Priority and packet color.
+ * 1 - Recalculate the value of Switch Priority and packet color.
+ * Access: RW
+ *
+ * Note: Not supported by SwitchX and SwitchX-2.
+ */
+MLXSW_ITEM32(reg, rgcr, usp, 0x18, 20, 1);
+
+/* reg_rgcr_pcp_rw
+ * Indicates how to handle the pcp_rewrite_en value:
+ * 0 - Preserve the value of pcp_rewrite_en.
+ * 2 - Disable PCP rewrite.
+ * 3 - Enable PCP rewrite.
+ * Access: RW
+ *
+ * Note: Not supported by SwitchX and SwitchX-2.
+ */
+MLXSW_ITEM32(reg, rgcr, pcp_rw, 0x18, 16, 2);
+
+/* reg_rgcr_activity_dis
+ * Activity disable:
+ * 0 - Activity will be set when an entry is hit (default).
+ * 1 - Activity will not be set when an entry is hit.
+ *
+ * Bit 0 - Disable activity bit in Router Algorithmic LPM Unicast Entry
+ * (RALUE).
+ * Bit 1 - Disable activity bit in Router Algorithmic LPM Unicast Host
+ * Entry (RAUHT).
+ * Bits 2:7 are reserved.
+ * Access: RW
+ *
+ * Note: Not supported by SwitchX, SwitchX-2 and Switch-IB.
+ */
+MLXSW_ITEM32(reg, rgcr, activity_dis, 0x20, 0, 8);
+
+static inline void mlxsw_reg_rgcr_pack(char *payload, bool ipv4_en)
+{
+ MLXSW_REG_ZERO(rgcr, payload);
+ mlxsw_reg_rgcr_ipv4_en_set(payload, ipv4_en);
+}
+
+/* RITR - Router Interface Table Register
+ * --------------------------------------
+ * The register is used to configure the router interface table.
+ */
+#define MLXSW_REG_RITR_ID 0x8002
+#define MLXSW_REG_RITR_LEN 0x40
+
+static const struct mlxsw_reg_info mlxsw_reg_ritr = {
+ .id = MLXSW_REG_RITR_ID,
+ .len = MLXSW_REG_RITR_LEN,
+};
+
+/* reg_ritr_enable
+ * Enables routing on the router interface.
+ * Access: RW
+ */
+MLXSW_ITEM32(reg, ritr, enable, 0x00, 31, 1);
+
+/* reg_ritr_ipv4
+ * IPv4 routing enable. Enables routing of IPv4 traffic on the router
+ * interface.
+ * Access: RW
+ */
+MLXSW_ITEM32(reg, ritr, ipv4, 0x00, 29, 1);
+
+/* reg_ritr_ipv6
+ * IPv6 routing enable. Enables routing of IPv6 traffic on the router
+ * interface.
+ * Access: RW
+ */
+MLXSW_ITEM32(reg, ritr, ipv6, 0x00, 28, 1);
+
+enum mlxsw_reg_ritr_if_type {
+ MLXSW_REG_RITR_VLAN_IF,
+ MLXSW_REG_RITR_FID_IF,
+ MLXSW_REG_RITR_SP_IF,
+};
+
+/* reg_ritr_type
+ * Router interface type.
+ * 0 - VLAN interface.
+ * 1 - FID interface.
+ * 2 - Sub-port interface.
+ * Access: RW
+ */
+MLXSW_ITEM32(reg, ritr, type, 0x00, 23, 3);
+
+enum {
+ MLXSW_REG_RITR_RIF_CREATE,
+ MLXSW_REG_RITR_RIF_DEL,
+};
+
+/* reg_ritr_op
+ * Opcode:
+ * 0 - Create or edit RIF.
+ * 1 - Delete RIF.
+ * Reserved for SwitchX-2. For Spectrum, editing of interface properties
+ * is not supported. An interface must be deleted and re-created in order
+ * to update properties.
+ * Access: WO
+ */
+MLXSW_ITEM32(reg, ritr, op, 0x00, 20, 2);
+
+/* reg_ritr_rif
+ * Router interface index. A pointer to the Router Interface Table.
+ * Access: Index
+ */
+MLXSW_ITEM32(reg, ritr, rif, 0x00, 0, 16);
+
+/* reg_ritr_ipv4_fe
+ * IPv4 Forwarding Enable.
+ * Enables routing of IPv4 traffic on the router interface. When disabled,
+ * forwarding is blocked but local traffic (traps and IP2ME) will be enabled.
+ * Not supported in SwitchX-2.
+ * Access: RW
+ */
+MLXSW_ITEM32(reg, ritr, ipv4_fe, 0x04, 29, 1);
+
+/* reg_ritr_ipv6_fe
+ * IPv6 Forwarding Enable.
+ * Enables routing of IPv6 traffic on the router interface. When disabled,
+ * forwarding is blocked but local traffic (traps and IP2ME) will be enabled.
+ * Not supported in SwitchX-2.
+ * Access: RW
+ */
+MLXSW_ITEM32(reg, ritr, ipv6_fe, 0x04, 28, 1);
+
+/* reg_ritr_lb_en
+ * Loop-back filter enable for unicast packets.
+ * If the flag is set then loop-back filter for unicast packets is
+ * implemented on the RIF. Multicast packets are always subject to
+ * loop-back filtering.
+ * Access: RW
+ */
+MLXSW_ITEM32(reg, ritr, lb_en, 0x04, 24, 1);
+
+/* reg_ritr_virtual_router
+ * Virtual router ID associated with the router interface.
+ * Access: RW
+ */
+MLXSW_ITEM32(reg, ritr, virtual_router, 0x04, 0, 16);
+
+/* reg_ritr_mtu
+ * Router interface MTU.
+ * Access: RW
+ */
+MLXSW_ITEM32(reg, ritr, mtu, 0x34, 0, 16);
+
+/* reg_ritr_if_swid
+ * Switch partition ID.
+ * Access: RW
+ */
+MLXSW_ITEM32(reg, ritr, if_swid, 0x08, 24, 8);
+
+/* reg_ritr_if_mac
+ * Router interface MAC address.
+ * In Spectrum, all MAC addresses must have the same 38 MSBits.
+ * Access: RW
+ */
+MLXSW_ITEM_BUF(reg, ritr, if_mac, 0x12, 6);
+
+/* VLAN Interface */
+
+/* reg_ritr_vlan_if_vid
+ * VLAN ID.
+ * Access: RW
+ */
+MLXSW_ITEM32(reg, ritr, vlan_if_vid, 0x08, 0, 12);
+
+/* FID Interface */
+
+/* reg_ritr_fid_if_fid
+ * Filtering ID. Used to connect a bridge to the router. Only FIDs from
+ * the vFID range are supported.
+ * Access: RW
+ */
+MLXSW_ITEM32(reg, ritr, fid_if_fid, 0x08, 0, 16);
+
+static inline void mlxsw_reg_ritr_fid_set(char *payload,
+ enum mlxsw_reg_ritr_if_type rif_type,
+ u16 fid)
+{
+ if (rif_type == MLXSW_REG_RITR_FID_IF)
+ mlxsw_reg_ritr_fid_if_fid_set(payload, fid);
+ else
+ mlxsw_reg_ritr_vlan_if_vid_set(payload, fid);
+}
+
+/* Sub-port Interface */
+
+/* reg_ritr_sp_if_lag
+ * LAG indication. When this bit is set the system_port field holds the
+ * LAG identifier.
+ * Access: RW
+ */
+MLXSW_ITEM32(reg, ritr, sp_if_lag, 0x08, 24, 1);
+
+/* reg_ritr_sp_system_port
+ * Port unique indentifier. When lag bit is set, this field holds the
+ * lag_id in bits 0:9.
+ * Access: RW
+ */
+MLXSW_ITEM32(reg, ritr, sp_if_system_port, 0x08, 0, 16);
+
+/* reg_ritr_sp_if_vid
+ * VLAN ID.
+ * Access: RW
+ */
+MLXSW_ITEM32(reg, ritr, sp_if_vid, 0x18, 0, 12);
+
+static inline void mlxsw_reg_ritr_rif_pack(char *payload, u16 rif)
+{
+ MLXSW_REG_ZERO(ritr, payload);
+ mlxsw_reg_ritr_rif_set(payload, rif);
+}
+
+static inline void mlxsw_reg_ritr_sp_if_pack(char *payload, bool lag,
+ u16 system_port, u16 vid)
+{
+ mlxsw_reg_ritr_sp_if_lag_set(payload, lag);
+ mlxsw_reg_ritr_sp_if_system_port_set(payload, system_port);
+ mlxsw_reg_ritr_sp_if_vid_set(payload, vid);
+}
+
+static inline void mlxsw_reg_ritr_pack(char *payload, bool enable,
+ enum mlxsw_reg_ritr_if_type type,
+ u16 rif, u16 mtu, const char *mac)
+{
+ bool op = enable ? MLXSW_REG_RITR_RIF_CREATE : MLXSW_REG_RITR_RIF_DEL;
+
+ MLXSW_REG_ZERO(ritr, payload);
+ mlxsw_reg_ritr_enable_set(payload, enable);
+ mlxsw_reg_ritr_ipv4_set(payload, 1);
+ mlxsw_reg_ritr_type_set(payload, type);
+ mlxsw_reg_ritr_op_set(payload, op);
+ mlxsw_reg_ritr_rif_set(payload, rif);
+ mlxsw_reg_ritr_ipv4_fe_set(payload, 1);
+ mlxsw_reg_ritr_lb_en_set(payload, 1);
+ mlxsw_reg_ritr_mtu_set(payload, mtu);
+ mlxsw_reg_ritr_if_mac_memcpy_to(payload, mac);
+}
+
+/* RATR - Router Adjacency Table Register
+ * --------------------------------------
+ * The RATR register is used to configure the Router Adjacency (next-hop)
+ * Table.
+ */
+#define MLXSW_REG_RATR_ID 0x8008
+#define MLXSW_REG_RATR_LEN 0x2C
+
+static const struct mlxsw_reg_info mlxsw_reg_ratr = {
+ .id = MLXSW_REG_RATR_ID,
+ .len = MLXSW_REG_RATR_LEN,
+};
+
+enum mlxsw_reg_ratr_op {
+ /* Read */
+ MLXSW_REG_RATR_OP_QUERY_READ = 0,
+ /* Read and clear activity */
+ MLXSW_REG_RATR_OP_QUERY_READ_CLEAR = 2,
+ /* Write Adjacency entry */
+ MLXSW_REG_RATR_OP_WRITE_WRITE_ENTRY = 1,
+ /* Write Adjacency entry only if the activity is cleared.
+ * The write may not succeed if the activity is set. There is not
+ * direct feedback if the write has succeeded or not, however
+ * the get will reveal the actual entry (SW can compare the get
+ * response to the set command).
+ */
+ MLXSW_REG_RATR_OP_WRITE_WRITE_ENTRY_ON_ACTIVITY = 3,
+};
+
+/* reg_ratr_op
+ * Note that Write operation may also be used for updating
+ * counter_set_type and counter_index. In this case all other
+ * fields must not be updated.
+ * Access: OP
+ */
+MLXSW_ITEM32(reg, ratr, op, 0x00, 28, 4);
+
+/* reg_ratr_v
+ * Valid bit. Indicates if the adjacency entry is valid.
+ * Note: the device may need some time before reusing an invalidated
+ * entry. During this time the entry can not be reused. It is
+ * recommended to use another entry before reusing an invalidated
+ * entry (e.g. software can put it at the end of the list for
+ * reusing). Trying to access an invalidated entry not yet cleared
+ * by the device results with failure indicating "Try Again" status.
+ * When valid is '0' then egress_router_interface,trap_action,
+ * adjacency_parameters and counters are reserved
+ * Access: RW
+ */
+MLXSW_ITEM32(reg, ratr, v, 0x00, 24, 1);
+
+/* reg_ratr_a
+ * Activity. Set for new entries. Set if a packet lookup has hit on
+ * the specific entry. To clear the a bit, use "clear activity".
+ * Access: RO
+ */
+MLXSW_ITEM32(reg, ratr, a, 0x00, 16, 1);
+
+/* reg_ratr_adjacency_index_low
+ * Bits 15:0 of index into the adjacency table.
+ * For SwitchX and SwitchX-2, the adjacency table is linear and
+ * used for adjacency entries only.
+ * For Spectrum, the index is to the KVD linear.
+ * Access: Index
+ */
+MLXSW_ITEM32(reg, ratr, adjacency_index_low, 0x04, 0, 16);
+
+/* reg_ratr_egress_router_interface
+ * Range is 0 .. cap_max_router_interfaces - 1
+ * Access: RW
+ */
+MLXSW_ITEM32(reg, ratr, egress_router_interface, 0x08, 0, 16);
+
+enum mlxsw_reg_ratr_trap_action {
+ MLXSW_REG_RATR_TRAP_ACTION_NOP,
+ MLXSW_REG_RATR_TRAP_ACTION_TRAP,
+ MLXSW_REG_RATR_TRAP_ACTION_MIRROR_TO_CPU,
+ MLXSW_REG_RATR_TRAP_ACTION_MIRROR,
+ MLXSW_REG_RATR_TRAP_ACTION_DISCARD_ERRORS,
+};
+
+/* reg_ratr_trap_action
+ * see mlxsw_reg_ratr_trap_action
+ * Access: RW
+ */
+MLXSW_ITEM32(reg, ratr, trap_action, 0x0C, 28, 4);
+
+enum mlxsw_reg_ratr_trap_id {
+ MLXSW_REG_RATR_TRAP_ID_RTR_EGRESS0 = 0,
+ MLXSW_REG_RATR_TRAP_ID_RTR_EGRESS1 = 1,
+};
+
+/* reg_ratr_adjacency_index_high
+ * Bits 23:16 of the adjacency_index.
+ * Access: Index
+ */
+MLXSW_ITEM32(reg, ratr, adjacency_index_high, 0x0C, 16, 8);
+
+/* reg_ratr_trap_id
+ * Trap ID to be reported to CPU.
+ * Trap-ID is RTR_EGRESS0 or RTR_EGRESS1.
+ * For trap_action of NOP, MIRROR and DISCARD_ERROR
+ * Access: RW
+ */
+MLXSW_ITEM32(reg, ratr, trap_id, 0x0C, 0, 8);
+
+/* reg_ratr_eth_destination_mac
+ * MAC address of the destination next-hop.
+ * Access: RW
+ */
+MLXSW_ITEM_BUF(reg, ratr, eth_destination_mac, 0x12, 6);
+
+static inline void
+mlxsw_reg_ratr_pack(char *payload,
+ enum mlxsw_reg_ratr_op op, bool valid,
+ u32 adjacency_index, u16 egress_rif)
+{
+ MLXSW_REG_ZERO(ratr, payload);
+ mlxsw_reg_ratr_op_set(payload, op);
+ mlxsw_reg_ratr_v_set(payload, valid);
+ mlxsw_reg_ratr_adjacency_index_low_set(payload, adjacency_index);
+ mlxsw_reg_ratr_adjacency_index_high_set(payload, adjacency_index >> 16);
+ mlxsw_reg_ratr_egress_router_interface_set(payload, egress_rif);
+}
+
+static inline void mlxsw_reg_ratr_eth_entry_pack(char *payload,
+ const char *dest_mac)
+{
+ mlxsw_reg_ratr_eth_destination_mac_memcpy_to(payload, dest_mac);
+}
+
+/* RALTA - Router Algorithmic LPM Tree Allocation Register
+ * -------------------------------------------------------
+ * RALTA is used to allocate the LPM trees of the SHSPM method.
+ */
+#define MLXSW_REG_RALTA_ID 0x8010
+#define MLXSW_REG_RALTA_LEN 0x04
+
+static const struct mlxsw_reg_info mlxsw_reg_ralta = {
+ .id = MLXSW_REG_RALTA_ID,
+ .len = MLXSW_REG_RALTA_LEN,
+};
+
+/* reg_ralta_op
+ * opcode (valid for Write, must be 0 on Read)
+ * 0 - allocate a tree
+ * 1 - deallocate a tree
+ * Access: OP
+ */
+MLXSW_ITEM32(reg, ralta, op, 0x00, 28, 2);
+
+enum mlxsw_reg_ralxx_protocol {
+ MLXSW_REG_RALXX_PROTOCOL_IPV4,
+ MLXSW_REG_RALXX_PROTOCOL_IPV6,
+};
+
+/* reg_ralta_protocol
+ * Protocol.
+ * Deallocation opcode: Reserved.
+ * Access: RW
+ */
+MLXSW_ITEM32(reg, ralta, protocol, 0x00, 24, 4);
+
+/* reg_ralta_tree_id
+ * An identifier (numbered from 1..cap_shspm_max_trees-1) representing
+ * the tree identifier (managed by software).
+ * Note that tree_id 0 is allocated for a default-route tree.
+ * Access: Index
+ */
+MLXSW_ITEM32(reg, ralta, tree_id, 0x00, 0, 8);
+
+static inline void mlxsw_reg_ralta_pack(char *payload, bool alloc,
+ enum mlxsw_reg_ralxx_protocol protocol,
+ u8 tree_id)
+{
+ MLXSW_REG_ZERO(ralta, payload);
+ mlxsw_reg_ralta_op_set(payload, !alloc);
+ mlxsw_reg_ralta_protocol_set(payload, protocol);
+ mlxsw_reg_ralta_tree_id_set(payload, tree_id);
+}
+
+/* RALST - Router Algorithmic LPM Structure Tree Register
+ * ------------------------------------------------------
+ * RALST is used to set and query the structure of an LPM tree.
+ * The structure of the tree must be sorted as a sorted binary tree, while
+ * each node is a bin that is tagged as the length of the prefixes the lookup
+ * will refer to. Therefore, bin X refers to a set of entries with prefixes
+ * of X bits to match with the destination address. The bin 0 indicates
+ * the default action, when there is no match of any prefix.
+ */
+#define MLXSW_REG_RALST_ID 0x8011
+#define MLXSW_REG_RALST_LEN 0x104
+
+static const struct mlxsw_reg_info mlxsw_reg_ralst = {
+ .id = MLXSW_REG_RALST_ID,
+ .len = MLXSW_REG_RALST_LEN,
+};
+
+/* reg_ralst_root_bin
+ * The bin number of the root bin.
+ * 0<root_bin=<(length of IP address)
+ * For a default-route tree configure 0xff
+ * Access: RW
+ */
+MLXSW_ITEM32(reg, ralst, root_bin, 0x00, 16, 8);
+
+/* reg_ralst_tree_id
+ * Tree identifier numbered from 1..(cap_shspm_max_trees-1).
+ * Access: Index
+ */
+MLXSW_ITEM32(reg, ralst, tree_id, 0x00, 0, 8);
+
+#define MLXSW_REG_RALST_BIN_NO_CHILD 0xff
+#define MLXSW_REG_RALST_BIN_OFFSET 0x04
+#define MLXSW_REG_RALST_BIN_COUNT 128
+
+/* reg_ralst_left_child_bin
+ * Holding the children of the bin according to the stored tree's structure.
+ * For trees composed of less than 4 blocks, the bins in excess are reserved.
+ * Note that tree_id 0 is allocated for a default-route tree, bins are 0xff
+ * Access: RW
+ */
+MLXSW_ITEM16_INDEXED(reg, ralst, left_child_bin, 0x04, 8, 8, 0x02, 0x00, false);
+
+/* reg_ralst_right_child_bin
+ * Holding the children of the bin according to the stored tree's structure.
+ * For trees composed of less than 4 blocks, the bins in excess are reserved.
+ * Note that tree_id 0 is allocated for a default-route tree, bins are 0xff
+ * Access: RW
+ */
+MLXSW_ITEM16_INDEXED(reg, ralst, right_child_bin, 0x04, 0, 8, 0x02, 0x00,
+ false);
+
+static inline void mlxsw_reg_ralst_pack(char *payload, u8 root_bin, u8 tree_id)
+{
+ MLXSW_REG_ZERO(ralst, payload);
+
+ /* Initialize all bins to have no left or right child */
+ memset(payload + MLXSW_REG_RALST_BIN_OFFSET,
+ MLXSW_REG_RALST_BIN_NO_CHILD, MLXSW_REG_RALST_BIN_COUNT * 2);
+
+ mlxsw_reg_ralst_root_bin_set(payload, root_bin);
+ mlxsw_reg_ralst_tree_id_set(payload, tree_id);
+}
+
+static inline void mlxsw_reg_ralst_bin_pack(char *payload, u8 bin_number,
+ u8 left_child_bin,
+ u8 right_child_bin)
+{
+ int bin_index = bin_number - 1;
+
+ mlxsw_reg_ralst_left_child_bin_set(payload, bin_index, left_child_bin);
+ mlxsw_reg_ralst_right_child_bin_set(payload, bin_index,
+ right_child_bin);
+}
+
+/* RALTB - Router Algorithmic LPM Tree Binding Register
+ * ----------------------------------------------------
+ * RALTB is used to bind virtual router and protocol to an allocated LPM tree.
+ */
+#define MLXSW_REG_RALTB_ID 0x8012
+#define MLXSW_REG_RALTB_LEN 0x04
+
+static const struct mlxsw_reg_info mlxsw_reg_raltb = {
+ .id = MLXSW_REG_RALTB_ID,
+ .len = MLXSW_REG_RALTB_LEN,
+};
+
+/* reg_raltb_virtual_router
+ * Virtual Router ID
+ * Range is 0..cap_max_virtual_routers-1
+ * Access: Index
+ */
+MLXSW_ITEM32(reg, raltb, virtual_router, 0x00, 16, 16);
+
+/* reg_raltb_protocol
+ * Protocol.
+ * Access: Index
+ */
+MLXSW_ITEM32(reg, raltb, protocol, 0x00, 12, 4);
+
+/* reg_raltb_tree_id
+ * Tree to be used for the {virtual_router, protocol}
+ * Tree identifier numbered from 1..(cap_shspm_max_trees-1).
+ * By default, all Unicast IPv4 and IPv6 are bound to tree_id 0.
+ * Access: RW
+ */
+MLXSW_ITEM32(reg, raltb, tree_id, 0x00, 0, 8);
+
+static inline void mlxsw_reg_raltb_pack(char *payload, u16 virtual_router,
+ enum mlxsw_reg_ralxx_protocol protocol,
+ u8 tree_id)
+{
+ MLXSW_REG_ZERO(raltb, payload);
+ mlxsw_reg_raltb_virtual_router_set(payload, virtual_router);
+ mlxsw_reg_raltb_protocol_set(payload, protocol);
+ mlxsw_reg_raltb_tree_id_set(payload, tree_id);
+}
+
+/* RALUE - Router Algorithmic LPM Unicast Entry Register
+ * -----------------------------------------------------
+ * RALUE is used to configure and query LPM entries that serve
+ * the Unicast protocols.
+ */
+#define MLXSW_REG_RALUE_ID 0x8013
+#define MLXSW_REG_RALUE_LEN 0x38
+
+static const struct mlxsw_reg_info mlxsw_reg_ralue = {
+ .id = MLXSW_REG_RALUE_ID,
+ .len = MLXSW_REG_RALUE_LEN,
+};
+
+/* reg_ralue_protocol
+ * Protocol.
+ * Access: Index
+ */
+MLXSW_ITEM32(reg, ralue, protocol, 0x00, 24, 4);
+
+enum mlxsw_reg_ralue_op {
+ /* Read operation. If entry doesn't exist, the operation fails. */
+ MLXSW_REG_RALUE_OP_QUERY_READ = 0,
+ /* Clear on read operation. Used to read entry and
+ * clear Activity bit.
+ */
+ MLXSW_REG_RALUE_OP_QUERY_CLEAR = 1,
+ /* Write operation. Used to write a new entry to the table. All RW
+ * fields are written for new entry. Activity bit is set
+ * for new entries.
+ */
+ MLXSW_REG_RALUE_OP_WRITE_WRITE = 0,
+ /* Update operation. Used to update an existing route entry and
+ * only update the RW fields that are detailed in the field
+ * op_u_mask. If entry doesn't exist, the operation fails.
+ */
+ MLXSW_REG_RALUE_OP_WRITE_UPDATE = 1,
+ /* Clear activity. The Activity bit (the field a) is cleared
+ * for the entry.
+ */
+ MLXSW_REG_RALUE_OP_WRITE_CLEAR = 2,
+ /* Delete operation. Used to delete an existing entry. If entry
+ * doesn't exist, the operation fails.
+ */
+ MLXSW_REG_RALUE_OP_WRITE_DELETE = 3,
+};
+
+/* reg_ralue_op
+ * Operation.
+ * Access: OP
+ */
+MLXSW_ITEM32(reg, ralue, op, 0x00, 20, 3);
+
+/* reg_ralue_a
+ * Activity. Set for new entries. Set if a packet lookup has hit on the
+ * specific entry, only if the entry is a route. To clear the a bit, use
+ * "clear activity" op.
+ * Enabled by activity_dis in RGCR
+ * Access: RO
+ */
+MLXSW_ITEM32(reg, ralue, a, 0x00, 16, 1);
+
+/* reg_ralue_virtual_router
+ * Virtual Router ID
+ * Range is 0..cap_max_virtual_routers-1
+ * Access: Index
+ */
+MLXSW_ITEM32(reg, ralue, virtual_router, 0x04, 16, 16);
+
+#define MLXSW_REG_RALUE_OP_U_MASK_ENTRY_TYPE BIT(0)
+#define MLXSW_REG_RALUE_OP_U_MASK_BMP_LEN BIT(1)
+#define MLXSW_REG_RALUE_OP_U_MASK_ACTION BIT(2)
+
+/* reg_ralue_op_u_mask
+ * opcode update mask.
+ * On read operation, this field is reserved.
+ * This field is valid for update opcode, otherwise - reserved.
+ * This field is a bitmask of the fields that should be updated.
+ * Access: WO
+ */
+MLXSW_ITEM32(reg, ralue, op_u_mask, 0x04, 8, 3);
+
+/* reg_ralue_prefix_len
+ * Number of bits in the prefix of the LPM route.
+ * Note that for IPv6 prefixes, if prefix_len>64 the entry consumes
+ * two entries in the physical HW table.
+ * Access: Index
+ */
+MLXSW_ITEM32(reg, ralue, prefix_len, 0x08, 0, 8);
+
+/* reg_ralue_dip*
+ * The prefix of the route or of the marker that the object of the LPM
+ * is compared with. The most significant bits of the dip are the prefix.
+ * The list significant bits must be '0' if the prefix_len is smaller
+ * than 128 for IPv6 or smaller than 32 for IPv4.
+ * IPv4 address uses bits dip[31:0] and bits dip[127:32] are reserved.
+ * Access: Index
+ */
+MLXSW_ITEM32(reg, ralue, dip4, 0x18, 0, 32);
+
+enum mlxsw_reg_ralue_entry_type {
+ MLXSW_REG_RALUE_ENTRY_TYPE_MARKER_ENTRY = 1,
+ MLXSW_REG_RALUE_ENTRY_TYPE_ROUTE_ENTRY = 2,
+ MLXSW_REG_RALUE_ENTRY_TYPE_MARKER_AND_ROUTE_ENTRY = 3,
+};
+
+/* reg_ralue_entry_type
+ * Entry type.
+ * Note - for Marker entries, the action_type and action fields are reserved.
+ * Access: RW
+ */
+MLXSW_ITEM32(reg, ralue, entry_type, 0x1C, 30, 2);
+
+/* reg_ralue_bmp_len
+ * The best match prefix length in the case that there is no match for
+ * longer prefixes.
+ * If (entry_type != MARKER_ENTRY), bmp_len must be equal to prefix_len
+ * Note for any update operation with entry_type modification this
+ * field must be set.
+ * Access: RW
+ */
+MLXSW_ITEM32(reg, ralue, bmp_len, 0x1C, 16, 8);
+
+enum mlxsw_reg_ralue_action_type {
+ MLXSW_REG_RALUE_ACTION_TYPE_REMOTE,
+ MLXSW_REG_RALUE_ACTION_TYPE_LOCAL,
+ MLXSW_REG_RALUE_ACTION_TYPE_IP2ME,
+};
+
+/* reg_ralue_action_type
+ * Action Type
+ * Indicates how the IP address is connected.
+ * It can be connected to a local subnet through local_erif or can be
+ * on a remote subnet connected through a next-hop router,
+ * or transmitted to the CPU.
+ * Reserved when entry_type = MARKER_ENTRY
+ * Access: RW
+ */
+MLXSW_ITEM32(reg, ralue, action_type, 0x1C, 0, 2);
+
+enum mlxsw_reg_ralue_trap_action {
+ MLXSW_REG_RALUE_TRAP_ACTION_NOP,
+ MLXSW_REG_RALUE_TRAP_ACTION_TRAP,
+ MLXSW_REG_RALUE_TRAP_ACTION_MIRROR_TO_CPU,
+ MLXSW_REG_RALUE_TRAP_ACTION_MIRROR,
+ MLXSW_REG_RALUE_TRAP_ACTION_DISCARD_ERROR,
+};
+
+/* reg_ralue_trap_action
+ * Trap action.
+ * For IP2ME action, only NOP and MIRROR are possible.
+ * Access: RW
+ */
+MLXSW_ITEM32(reg, ralue, trap_action, 0x20, 28, 4);
+
+/* reg_ralue_trap_id
+ * Trap ID to be reported to CPU.
+ * Trap ID is RTR_INGRESS0 or RTR_INGRESS1.
+ * For trap_action of NOP, MIRROR and DISCARD_ERROR, trap_id is reserved.
+ * Access: RW
+ */
+MLXSW_ITEM32(reg, ralue, trap_id, 0x20, 0, 9);
+
+/* reg_ralue_adjacency_index
+ * Points to the first entry of the group-based ECMP.
+ * Only relevant in case of REMOTE action.
+ * Access: RW
+ */
+MLXSW_ITEM32(reg, ralue, adjacency_index, 0x24, 0, 24);
+
+/* reg_ralue_ecmp_size
+ * Amount of sequential entries starting
+ * from the adjacency_index (the number of ECMPs).
+ * The valid range is 1-64, 512, 1024, 2048 and 4096.
+ * Reserved when trap_action is TRAP or DISCARD_ERROR.
+ * Only relevant in case of REMOTE action.
+ * Access: RW
+ */
+MLXSW_ITEM32(reg, ralue, ecmp_size, 0x28, 0, 13);
+
+/* reg_ralue_local_erif
+ * Egress Router Interface.
+ * Only relevant in case of LOCAL action.
+ * Access: RW
+ */
+MLXSW_ITEM32(reg, ralue, local_erif, 0x24, 0, 16);
+
+/* reg_ralue_v
+ * Valid bit for the tunnel_ptr field.
+ * If valid = 0 then trap to CPU as IP2ME trap ID.
+ * If valid = 1 and the packet format allows NVE or IPinIP tunnel
+ * decapsulation then tunnel decapsulation is done.
+ * If valid = 1 and packet format does not allow NVE or IPinIP tunnel
+ * decapsulation then trap as IP2ME trap ID.
+ * Only relevant in case of IP2ME action.
+ * Access: RW
+ */
+MLXSW_ITEM32(reg, ralue, v, 0x24, 31, 1);
+
+/* reg_ralue_tunnel_ptr
+ * Tunnel Pointer for NVE or IPinIP tunnel decapsulation.
+ * For Spectrum, pointer to KVD Linear.
+ * Only relevant in case of IP2ME action.
+ * Access: RW
+ */
+MLXSW_ITEM32(reg, ralue, tunnel_ptr, 0x24, 0, 24);
+
+static inline void mlxsw_reg_ralue_pack(char *payload,
+ enum mlxsw_reg_ralxx_protocol protocol,
+ enum mlxsw_reg_ralue_op op,
+ u16 virtual_router, u8 prefix_len)
+{
+ MLXSW_REG_ZERO(ralue, payload);
+ mlxsw_reg_ralue_protocol_set(payload, protocol);
+ mlxsw_reg_ralue_virtual_router_set(payload, virtual_router);
+ mlxsw_reg_ralue_prefix_len_set(payload, prefix_len);
+ mlxsw_reg_ralue_entry_type_set(payload,
+ MLXSW_REG_RALUE_ENTRY_TYPE_ROUTE_ENTRY);
+ mlxsw_reg_ralue_bmp_len_set(payload, prefix_len);
+}
+
+static inline void mlxsw_reg_ralue_pack4(char *payload,
+ enum mlxsw_reg_ralxx_protocol protocol,
+ enum mlxsw_reg_ralue_op op,
+ u16 virtual_router, u8 prefix_len,
+ u32 dip)
+{
+ mlxsw_reg_ralue_pack(payload, protocol, op, virtual_router, prefix_len);
+ mlxsw_reg_ralue_dip4_set(payload, dip);
+}
+
+static inline void
+mlxsw_reg_ralue_act_remote_pack(char *payload,
+ enum mlxsw_reg_ralue_trap_action trap_action,
+ u16 trap_id, u32 adjacency_index, u16 ecmp_size)
+{
+ mlxsw_reg_ralue_action_type_set(payload,
+ MLXSW_REG_RALUE_ACTION_TYPE_REMOTE);
+ mlxsw_reg_ralue_trap_action_set(payload, trap_action);
+ mlxsw_reg_ralue_trap_id_set(payload, trap_id);
+ mlxsw_reg_ralue_adjacency_index_set(payload, adjacency_index);
+ mlxsw_reg_ralue_ecmp_size_set(payload, ecmp_size);
+}
+
+static inline void
+mlxsw_reg_ralue_act_local_pack(char *payload,
+ enum mlxsw_reg_ralue_trap_action trap_action,
+ u16 trap_id, u16 local_erif)
+{
+ mlxsw_reg_ralue_action_type_set(payload,
+ MLXSW_REG_RALUE_ACTION_TYPE_LOCAL);
+ mlxsw_reg_ralue_trap_action_set(payload, trap_action);
+ mlxsw_reg_ralue_trap_id_set(payload, trap_id);
+ mlxsw_reg_ralue_local_erif_set(payload, local_erif);
+}
+
+static inline void
+mlxsw_reg_ralue_act_ip2me_pack(char *payload)
+{
+ mlxsw_reg_ralue_action_type_set(payload,
+ MLXSW_REG_RALUE_ACTION_TYPE_IP2ME);
+}
+
+/* RAUHT - Router Algorithmic LPM Unicast Host Table Register
+ * ----------------------------------------------------------
+ * The RAUHT register is used to configure and query the Unicast Host table in
+ * devices that implement the Algorithmic LPM.
+ */
+#define MLXSW_REG_RAUHT_ID 0x8014
+#define MLXSW_REG_RAUHT_LEN 0x74
+
+static const struct mlxsw_reg_info mlxsw_reg_rauht = {
+ .id = MLXSW_REG_RAUHT_ID,
+ .len = MLXSW_REG_RAUHT_LEN,
+};
+
+enum mlxsw_reg_rauht_type {
+ MLXSW_REG_RAUHT_TYPE_IPV4,
+ MLXSW_REG_RAUHT_TYPE_IPV6,
+};
+
+/* reg_rauht_type
+ * Access: Index
+ */
+MLXSW_ITEM32(reg, rauht, type, 0x00, 24, 2);
+
+enum mlxsw_reg_rauht_op {
+ MLXSW_REG_RAUHT_OP_QUERY_READ = 0,
+ /* Read operation */
+ MLXSW_REG_RAUHT_OP_QUERY_CLEAR_ON_READ = 1,
+ /* Clear on read operation. Used to read entry and clear
+ * activity bit.
+ */
+ MLXSW_REG_RAUHT_OP_WRITE_ADD = 0,
+ /* Add. Used to write a new entry to the table. All R/W fields are
+ * relevant for new entry. Activity bit is set for new entries.
+ */
+ MLXSW_REG_RAUHT_OP_WRITE_UPDATE = 1,
+ /* Update action. Used to update an existing route entry and
+ * only update the following fields:
+ * trap_action, trap_id, mac, counter_set_type, counter_index
+ */
+ MLXSW_REG_RAUHT_OP_WRITE_CLEAR_ACTIVITY = 2,
+ /* Clear activity. A bit is cleared for the entry. */
+ MLXSW_REG_RAUHT_OP_WRITE_DELETE = 3,
+ /* Delete entry */
+ MLXSW_REG_RAUHT_OP_WRITE_DELETE_ALL = 4,
+ /* Delete all host entries on a RIF. In this command, dip
+ * field is reserved.
+ */
+};
+
+/* reg_rauht_op
+ * Access: OP
+ */
+MLXSW_ITEM32(reg, rauht, op, 0x00, 20, 3);
+
+/* reg_rauht_a
+ * Activity. Set for new entries. Set if a packet lookup has hit on
+ * the specific entry.
+ * To clear the a bit, use "clear activity" op.
+ * Enabled by activity_dis in RGCR
+ * Access: RO
+ */
+MLXSW_ITEM32(reg, rauht, a, 0x00, 16, 1);
+
+/* reg_rauht_rif
+ * Router Interface
+ * Access: Index
+ */
+MLXSW_ITEM32(reg, rauht, rif, 0x00, 0, 16);
+
+/* reg_rauht_dip*
+ * Destination address.
+ * Access: Index
+ */
+MLXSW_ITEM32(reg, rauht, dip4, 0x1C, 0x0, 32);
+
+enum mlxsw_reg_rauht_trap_action {
+ MLXSW_REG_RAUHT_TRAP_ACTION_NOP,
+ MLXSW_REG_RAUHT_TRAP_ACTION_TRAP,
+ MLXSW_REG_RAUHT_TRAP_ACTION_MIRROR_TO_CPU,
+ MLXSW_REG_RAUHT_TRAP_ACTION_MIRROR,
+ MLXSW_REG_RAUHT_TRAP_ACTION_DISCARD_ERRORS,
+};
+
+/* reg_rauht_trap_action
+ * Access: RW
+ */
+MLXSW_ITEM32(reg, rauht, trap_action, 0x60, 28, 4);
+
+enum mlxsw_reg_rauht_trap_id {
+ MLXSW_REG_RAUHT_TRAP_ID_RTR_EGRESS0,
+ MLXSW_REG_RAUHT_TRAP_ID_RTR_EGRESS1,
+};
+
+/* reg_rauht_trap_id
+ * Trap ID to be reported to CPU.
+ * Trap-ID is RTR_EGRESS0 or RTR_EGRESS1.
+ * For trap_action of NOP, MIRROR and DISCARD_ERROR,
+ * trap_id is reserved.
+ * Access: RW
+ */
+MLXSW_ITEM32(reg, rauht, trap_id, 0x60, 0, 9);
+
+/* reg_rauht_counter_set_type
+ * Counter set type for flow counters
+ * Access: RW
+ */
+MLXSW_ITEM32(reg, rauht, counter_set_type, 0x68, 24, 8);
+
+/* reg_rauht_counter_index
+ * Counter index for flow counters
+ * Access: RW
+ */
+MLXSW_ITEM32(reg, rauht, counter_index, 0x68, 0, 24);
+
+/* reg_rauht_mac
+ * MAC address.
+ * Access: RW
+ */
+MLXSW_ITEM_BUF(reg, rauht, mac, 0x6E, 6);
+
+static inline void mlxsw_reg_rauht_pack(char *payload,
+ enum mlxsw_reg_rauht_op op, u16 rif,
+ const char *mac)
+{
+ MLXSW_REG_ZERO(rauht, payload);
+ mlxsw_reg_rauht_op_set(payload, op);
+ mlxsw_reg_rauht_rif_set(payload, rif);
+ mlxsw_reg_rauht_mac_memcpy_to(payload, mac);
+}
+
+static inline void mlxsw_reg_rauht_pack4(char *payload,
+ enum mlxsw_reg_rauht_op op, u16 rif,
+ const char *mac, u32 dip)
+{
+ mlxsw_reg_rauht_pack(payload, op, rif, mac);
+ mlxsw_reg_rauht_dip4_set(payload, dip);
+}
+
+/* RALEU - Router Algorithmic LPM ECMP Update Register
+ * ---------------------------------------------------
+ * The register enables updating the ECMP section in the action for multiple
+ * LPM Unicast entries in a single operation. The update is executed to
+ * all entries of a {virtual router, protocol} tuple using the same ECMP group.
+ */
+#define MLXSW_REG_RALEU_ID 0x8015
+#define MLXSW_REG_RALEU_LEN 0x28
+
+static const struct mlxsw_reg_info mlxsw_reg_raleu = {
+ .id = MLXSW_REG_RALEU_ID,
+ .len = MLXSW_REG_RALEU_LEN,
+};
+
+/* reg_raleu_protocol
+ * Protocol.
+ * Access: Index
+ */
+MLXSW_ITEM32(reg, raleu, protocol, 0x00, 24, 4);
+
+/* reg_raleu_virtual_router
+ * Virtual Router ID
+ * Range is 0..cap_max_virtual_routers-1
+ * Access: Index
+ */
+MLXSW_ITEM32(reg, raleu, virtual_router, 0x00, 0, 16);
+
+/* reg_raleu_adjacency_index
+ * Adjacency Index used for matching on the existing entries.
+ * Access: Index
+ */
+MLXSW_ITEM32(reg, raleu, adjacency_index, 0x10, 0, 24);
+
+/* reg_raleu_ecmp_size
+ * ECMP Size used for matching on the existing entries.
+ * Access: Index
+ */
+MLXSW_ITEM32(reg, raleu, ecmp_size, 0x14, 0, 13);
+
+/* reg_raleu_new_adjacency_index
+ * New Adjacency Index.
+ * Access: WO
+ */
+MLXSW_ITEM32(reg, raleu, new_adjacency_index, 0x20, 0, 24);
+
+/* reg_raleu_new_ecmp_size
+ * New ECMP Size.
+ * Access: WO
+ */
+MLXSW_ITEM32(reg, raleu, new_ecmp_size, 0x24, 0, 13);
+
+static inline void mlxsw_reg_raleu_pack(char *payload,
+ enum mlxsw_reg_ralxx_protocol protocol,
+ u16 virtual_router,
+ u32 adjacency_index, u16 ecmp_size,
+ u32 new_adjacency_index,
+ u16 new_ecmp_size)
+{
+ MLXSW_REG_ZERO(raleu, payload);
+ mlxsw_reg_raleu_protocol_set(payload, protocol);
+ mlxsw_reg_raleu_virtual_router_set(payload, virtual_router);
+ mlxsw_reg_raleu_adjacency_index_set(payload, adjacency_index);
+ mlxsw_reg_raleu_ecmp_size_set(payload, ecmp_size);
+ mlxsw_reg_raleu_new_adjacency_index_set(payload, new_adjacency_index);
+ mlxsw_reg_raleu_new_ecmp_size_set(payload, new_ecmp_size);
+}
+
+/* RAUHTD - Router Algorithmic LPM Unicast Host Table Dump Register
+ * ----------------------------------------------------------------
+ * The RAUHTD register allows dumping entries from the Router Unicast Host
+ * Table. For a given session an entry is dumped no more than one time. The
+ * first RAUHTD access after reset is a new session. A session ends when the
+ * num_rec response is smaller than num_rec request or for IPv4 when the
+ * num_entries is smaller than 4. The clear activity affect the current session
+ * or the last session if a new session has not started.
+ */
+#define MLXSW_REG_RAUHTD_ID 0x8018
+#define MLXSW_REG_RAUHTD_BASE_LEN 0x20
+#define MLXSW_REG_RAUHTD_REC_LEN 0x20
+#define MLXSW_REG_RAUHTD_REC_MAX_NUM 32
+#define MLXSW_REG_RAUHTD_LEN (MLXSW_REG_RAUHTD_BASE_LEN + \
+ MLXSW_REG_RAUHTD_REC_MAX_NUM * MLXSW_REG_RAUHTD_REC_LEN)
+#define MLXSW_REG_RAUHTD_IPV4_ENT_PER_REC 4
+
+static const struct mlxsw_reg_info mlxsw_reg_rauhtd = {
+ .id = MLXSW_REG_RAUHTD_ID,
+ .len = MLXSW_REG_RAUHTD_LEN,
+};
+
+#define MLXSW_REG_RAUHTD_FILTER_A BIT(0)
+#define MLXSW_REG_RAUHTD_FILTER_RIF BIT(3)
+
+/* reg_rauhtd_filter_fields
+ * if a bit is '0' then the relevant field is ignored and dump is done
+ * regardless of the field value
+ * Bit0 - filter by activity: entry_a
+ * Bit3 - filter by entry rip: entry_rif
+ * Access: Index
+ */
+MLXSW_ITEM32(reg, rauhtd, filter_fields, 0x00, 0, 8);
+
+enum mlxsw_reg_rauhtd_op {
+ MLXSW_REG_RAUHTD_OP_DUMP,
+ MLXSW_REG_RAUHTD_OP_DUMP_AND_CLEAR,
+};
+
+/* reg_rauhtd_op
+ * Access: OP
+ */
+MLXSW_ITEM32(reg, rauhtd, op, 0x04, 24, 2);
+
+/* reg_rauhtd_num_rec
+ * At request: number of records requested
+ * At response: number of records dumped
+ * For IPv4, each record has 4 entries at request and up to 4 entries
+ * at response
+ * Range is 0..MLXSW_REG_RAUHTD_REC_MAX_NUM
+ * Access: Index
+ */
+MLXSW_ITEM32(reg, rauhtd, num_rec, 0x04, 0, 8);
+
+/* reg_rauhtd_entry_a
+ * Dump only if activity has value of entry_a
+ * Reserved if filter_fields bit0 is '0'
+ * Access: Index
+ */
+MLXSW_ITEM32(reg, rauhtd, entry_a, 0x08, 16, 1);
+
+enum mlxsw_reg_rauhtd_type {
+ MLXSW_REG_RAUHTD_TYPE_IPV4,
+ MLXSW_REG_RAUHTD_TYPE_IPV6,
+};
+
+/* reg_rauhtd_type
+ * Dump only if record type is:
+ * 0 - IPv4
+ * 1 - IPv6
+ * Access: Index
+ */
+MLXSW_ITEM32(reg, rauhtd, type, 0x08, 0, 4);
+
+/* reg_rauhtd_entry_rif
+ * Dump only if RIF has value of entry_rif
+ * Reserved if filter_fields bit3 is '0'
+ * Access: Index
+ */
+MLXSW_ITEM32(reg, rauhtd, entry_rif, 0x0C, 0, 16);
+
+static inline void mlxsw_reg_rauhtd_pack(char *payload,
+ enum mlxsw_reg_rauhtd_type type)
+{
+ MLXSW_REG_ZERO(rauhtd, payload);
+ mlxsw_reg_rauhtd_filter_fields_set(payload, MLXSW_REG_RAUHTD_FILTER_A);
+ mlxsw_reg_rauhtd_op_set(payload, MLXSW_REG_RAUHTD_OP_DUMP_AND_CLEAR);
+ mlxsw_reg_rauhtd_num_rec_set(payload, MLXSW_REG_RAUHTD_REC_MAX_NUM);
+ mlxsw_reg_rauhtd_entry_a_set(payload, 1);
+ mlxsw_reg_rauhtd_type_set(payload, type);
+}
+
+/* reg_rauhtd_ipv4_rec_num_entries
+ * Number of valid entries in this record:
+ * 0 - 1 valid entry
+ * 1 - 2 valid entries
+ * 2 - 3 valid entries
+ * 3 - 4 valid entries
+ * Access: RO
+ */
+MLXSW_ITEM32_INDEXED(reg, rauhtd, ipv4_rec_num_entries,
+ MLXSW_REG_RAUHTD_BASE_LEN, 28, 2,
+ MLXSW_REG_RAUHTD_REC_LEN, 0x00, false);
+
+/* reg_rauhtd_rec_type
+ * Record type.
+ * 0 - IPv4
+ * 1 - IPv6
+ * Access: RO
+ */
+MLXSW_ITEM32_INDEXED(reg, rauhtd, rec_type, MLXSW_REG_RAUHTD_BASE_LEN, 24, 2,
+ MLXSW_REG_RAUHTD_REC_LEN, 0x00, false);
+
+#define MLXSW_REG_RAUHTD_IPV4_ENT_LEN 0x8
+
+/* reg_rauhtd_ipv4_ent_a
+ * Activity. Set for new entries. Set if a packet lookup has hit on the
+ * specific entry.
+ * Access: RO
+ */
+MLXSW_ITEM32_INDEXED(reg, rauhtd, ipv4_ent_a, MLXSW_REG_RAUHTD_BASE_LEN, 16, 1,
+ MLXSW_REG_RAUHTD_IPV4_ENT_LEN, 0x00, false);
+
+/* reg_rauhtd_ipv4_ent_rif
+ * Router interface.
+ * Access: RO
+ */
+MLXSW_ITEM32_INDEXED(reg, rauhtd, ipv4_ent_rif, MLXSW_REG_RAUHTD_BASE_LEN, 0,
+ 16, MLXSW_REG_RAUHTD_IPV4_ENT_LEN, 0x00, false);
+
+/* reg_rauhtd_ipv4_ent_dip
+ * Destination IPv4 address.
+ * Access: RO
+ */
+MLXSW_ITEM32_INDEXED(reg, rauhtd, ipv4_ent_dip, MLXSW_REG_RAUHTD_BASE_LEN, 0,
+ 32, MLXSW_REG_RAUHTD_IPV4_ENT_LEN, 0x04, false);
+
+static inline void mlxsw_reg_rauhtd_ent_ipv4_unpack(char *payload,
+ int ent_index, u16 *p_rif,
+ u32 *p_dip)
+{
+ *p_rif = mlxsw_reg_rauhtd_ipv4_ent_rif_get(payload, ent_index);
+ *p_dip = mlxsw_reg_rauhtd_ipv4_ent_dip_get(payload, ent_index);
+}
+
/* MFCR - Management Fan Control Register
* --------------------------------------
* This register controls the settings of the Fan Speed PWM mechanism.
mlxsw_reg_mtmp_sensor_name_memcpy_from(payload, sensor_name);
}
+/* MPAT - Monitoring Port Analyzer Table
+ * -------------------------------------
+ * MPAT Register is used to query and configure the Switch PortAnalyzer Table.
+ * For an enabled analyzer, all fields except e (enable) cannot be modified.
+ */
+#define MLXSW_REG_MPAT_ID 0x901A
+#define MLXSW_REG_MPAT_LEN 0x78
+
+static const struct mlxsw_reg_info mlxsw_reg_mpat = {
+ .id = MLXSW_REG_MPAT_ID,
+ .len = MLXSW_REG_MPAT_LEN,
+};
+
+/* reg_mpat_pa_id
+ * Port Analyzer ID.
+ * Access: Index
+ */
+MLXSW_ITEM32(reg, mpat, pa_id, 0x00, 28, 4);
+
+/* reg_mpat_system_port
+ * A unique port identifier for the final destination of the packet.
+ * Access: RW
+ */
+MLXSW_ITEM32(reg, mpat, system_port, 0x00, 0, 16);
+
+/* reg_mpat_e
+ * Enable. Indicating the Port Analyzer is enabled.
+ * Access: RW
+ */
+MLXSW_ITEM32(reg, mpat, e, 0x04, 31, 1);
+
+/* reg_mpat_qos
+ * Quality Of Service Mode.
+ * 0: CONFIGURED - QoS parameters (Switch Priority, and encapsulation
+ * PCP, DEI, DSCP or VL) are configured.
+ * 1: MAINTAIN - QoS parameters (Switch Priority, Color) are the
+ * same as in the original packet that has triggered the mirroring. For
+ * SPAN also the pcp,dei are maintained.
+ * Access: RW
+ */
+MLXSW_ITEM32(reg, mpat, qos, 0x04, 26, 1);
+
+/* reg_mpat_be
+ * Best effort mode. Indicates mirroring traffic should not cause packet
+ * drop or back pressure, but will discard the mirrored packets. Mirrored
+ * packets will be forwarded on a best effort manner.
+ * 0: Do not discard mirrored packets
+ * 1: Discard mirrored packets if causing congestion
+ * Access: RW
+ */
+MLXSW_ITEM32(reg, mpat, be, 0x04, 25, 1);
+
+static inline void mlxsw_reg_mpat_pack(char *payload, u8 pa_id,
+ u16 system_port, bool e)
+{
+ MLXSW_REG_ZERO(mpat, payload);
+ mlxsw_reg_mpat_pa_id_set(payload, pa_id);
+ mlxsw_reg_mpat_system_port_set(payload, system_port);
+ mlxsw_reg_mpat_e_set(payload, e);
+ mlxsw_reg_mpat_qos_set(payload, 1);
+ mlxsw_reg_mpat_be_set(payload, 1);
+}
+
+/* MPAR - Monitoring Port Analyzer Register
+ * ----------------------------------------
+ * MPAR register is used to query and configure the port analyzer port mirroring
+ * properties.
+ */
+#define MLXSW_REG_MPAR_ID 0x901B
+#define MLXSW_REG_MPAR_LEN 0x08
+
+static const struct mlxsw_reg_info mlxsw_reg_mpar = {
+ .id = MLXSW_REG_MPAR_ID,
+ .len = MLXSW_REG_MPAR_LEN,
+};
+
+/* reg_mpar_local_port
+ * The local port to mirror the packets from.
+ * Access: Index
+ */
+MLXSW_ITEM32(reg, mpar, local_port, 0x00, 16, 8);
+
+enum mlxsw_reg_mpar_i_e {
+ MLXSW_REG_MPAR_TYPE_EGRESS,
+ MLXSW_REG_MPAR_TYPE_INGRESS,
+};
+
+/* reg_mpar_i_e
+ * Ingress/Egress
+ * Access: Index
+ */
+MLXSW_ITEM32(reg, mpar, i_e, 0x00, 0, 4);
+
+/* reg_mpar_enable
+ * Enable mirroring
+ * By default, port mirroring is disabled for all ports.
+ * Access: RW
+ */
+MLXSW_ITEM32(reg, mpar, enable, 0x04, 31, 1);
+
+/* reg_mpar_pa_id
+ * Port Analyzer ID.
+ * Access: RW
+ */
+MLXSW_ITEM32(reg, mpar, pa_id, 0x04, 0, 4);
+
+static inline void mlxsw_reg_mpar_pack(char *payload, u8 local_port,
+ enum mlxsw_reg_mpar_i_e i_e,
+ bool enable, u8 pa_id)
+{
+ MLXSW_REG_ZERO(mpar, payload);
+ mlxsw_reg_mpar_local_port_set(payload, local_port);
+ mlxsw_reg_mpar_enable_set(payload, enable);
+ mlxsw_reg_mpar_i_e_set(payload, i_e);
+ mlxsw_reg_mpar_pa_id_set(payload, pa_id);
+}
+
/* MLCR - Management LED Control Register
* --------------------------------------
* Controls the system LEDs.
mlxsw_reg_sbsr_rec_max_buff_occupancy_get(payload, rec_index);
}
+/* SBIB - Shared Buffer Internal Buffer Register
+ * ---------------------------------------------
+ * The SBIB register configures per port buffers for internal use. The internal
+ * buffers consume memory on the port buffers (note that the port buffers are
+ * used also by PBMC).
+ *
+ * For Spectrum this is used for egress mirroring.
+ */
+#define MLXSW_REG_SBIB_ID 0xB006
+#define MLXSW_REG_SBIB_LEN 0x10
+
+static const struct mlxsw_reg_info mlxsw_reg_sbib = {
+ .id = MLXSW_REG_SBIB_ID,
+ .len = MLXSW_REG_SBIB_LEN,
+};
+
+/* reg_sbib_local_port
+ * Local port number
+ * Not supported for CPU port and router port
+ * Access: Index
+ */
+MLXSW_ITEM32(reg, sbib, local_port, 0x00, 16, 8);
+
+/* reg_sbib_buff_size
+ * Units represented in cells
+ * Allowed range is 0 to (cap_max_headroom_size - 1)
+ * Default is 0
+ * Access: RW
+ */
+MLXSW_ITEM32(reg, sbib, buff_size, 0x08, 0, 24);
+
+static inline void mlxsw_reg_sbib_pack(char *payload, u8 local_port,
+ u32 buff_size)
+{
+ MLXSW_REG_ZERO(sbib, payload);
+ mlxsw_reg_sbib_local_port_set(payload, local_port);
+ mlxsw_reg_sbib_buff_size_set(payload, buff_size);
+}
+
static inline const char *mlxsw_reg_id_str(u16 reg_id)
{
switch (reg_id) {
return "HTGT";
case MLXSW_REG_HPKT_ID:
return "HPKT";
+ case MLXSW_REG_RGCR_ID:
+ return "RGCR";
+ case MLXSW_REG_RITR_ID:
+ return "RITR";
+ case MLXSW_REG_RATR_ID:
+ return "RATR";
+ case MLXSW_REG_RALTA_ID:
+ return "RALTA";
+ case MLXSW_REG_RALST_ID:
+ return "RALST";
+ case MLXSW_REG_RALTB_ID:
+ return "RALTB";
+ case MLXSW_REG_RALUE_ID:
+ return "RALUE";
+ case MLXSW_REG_RAUHT_ID:
+ return "RAUHT";
+ case MLXSW_REG_RALEU_ID:
+ return "RALEU";
+ case MLXSW_REG_RAUHTD_ID:
+ return "RAUHTD";
case MLXSW_REG_MFCR_ID:
return "MFCR";
case MLXSW_REG_MFSC_ID:
return "MFSM";
case MLXSW_REG_MTCAP_ID:
return "MTCAP";
+ case MLXSW_REG_MPAT_ID:
+ return "MPAT";
+ case MLXSW_REG_MPAR_ID:
+ return "MPAR";
case MLXSW_REG_MTMP_ID:
return "MTMP";
case MLXSW_REG_MLCR_ID:
return "SBMM";
case MLXSW_REG_SBSR_ID:
return "SBSR";
+ case MLXSW_REG_SBIB_ID:
+ return "SBIB";
default:
return "*UNKNOWN*";
}
projects / cascardo / linux.git / blobdiff