#include <linux/usb/cdc.h>
/* Version Information */
-#define DRIVER_VERSION "v1.08.0 (2015/01/13)"
+#define DRIVER_VERSION "v1.08.1 (2015/07/28)"
#define DRIVER_AUTHOR "Realtek linux nic maintainers <nic_swsd@realtek.com>"
#define DRIVER_DESC "Realtek RTL8152/RTL8153 Based USB Ethernet Adapters"
#define MODULENAME "r8152"
static void rtl8152_tx_timeout(struct net_device *netdev)
{
struct r8152 *tp = netdev_priv(netdev);
- int i;
netif_warn(tp, tx_err, netdev, "Tx timeout\n");
- for (i = 0; i < RTL8152_MAX_TX; i++)
- usb_unlink_urb(tp->tx_info[i].urb);
+
+ usb_queue_reset_device(tp->intf);
}
static void rtl8152_set_rx_mode(struct net_device *netdev)
{
int i, ret = 0;
- napi_disable(&tp->napi);
INIT_LIST_HEAD(&tp->rx_done);
for (i = 0; i < RTL8152_MAX_RX; i++) {
INIT_LIST_HEAD(&tp->rx_info[i].list);
if (ret)
break;
}
- napi_enable(&tp->napi);
if (ret && ++i < RTL8152_MAX_RX) {
struct list_head rx_queue;
if (test_bit(RTL8152_UNPLUG, &tp->flags))
return -ENODEV;
+ usb_disable_lpm(tp->udev);
set_tx_qlen(tp);
rtl_set_eee_plus(tp);
r8153_set_rx_early_timeout(tp);
device_set_wakeup_enable(&tp->udev->dev, false);
}
+static void r8153_u1u2en(struct r8152 *tp, bool enable)
+{
+ u8 u1u2[8];
+
+ if (enable)
+ memset(u1u2, 0xff, sizeof(u1u2));
+ else
+ memset(u1u2, 0x00, sizeof(u1u2));
+
+ usb_ocp_write(tp, USB_TOLERANCE, BYTE_EN_SIX_BYTES, sizeof(u1u2), u1u2);
+}
+
+static void r8153_u2p3en(struct r8152 *tp, bool enable)
+{
+ u32 ocp_data;
+
+ ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_U2P3_CTRL);
+ if (enable && tp->version != RTL_VER_03 && tp->version != RTL_VER_04)
+ ocp_data |= U2P3_ENABLE;
+ else
+ ocp_data &= ~U2P3_ENABLE;
+ ocp_write_word(tp, MCU_TYPE_USB, USB_U2P3_CTRL, ocp_data);
+}
+
+static void r8153_power_cut_en(struct r8152 *tp, bool enable)
+{
+ u32 ocp_data;
+
+ ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_POWER_CUT);
+ if (enable)
+ ocp_data |= PWR_EN | PHASE2_EN;
+ else
+ ocp_data &= ~(PWR_EN | PHASE2_EN);
+ ocp_write_word(tp, MCU_TYPE_USB, USB_POWER_CUT, ocp_data);
+
+ ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_MISC_0);
+ ocp_data &= ~PCUT_STATUS;
+ ocp_write_word(tp, MCU_TYPE_USB, USB_MISC_0, ocp_data);
+}
+
+static bool rtl_can_wakeup(struct r8152 *tp)
+{
+ struct usb_device *udev = tp->udev;
+
+ return (udev->actconfig->desc.bmAttributes & USB_CONFIG_ATT_WAKEUP);
+}
+
static void rtl_runtime_suspend_enable(struct r8152 *tp, bool enable)
{
if (enable) {
u32 ocp_data;
+ r8153_u1u2en(tp, false);
+ r8153_u2p3en(tp, false);
+
__rtl_set_wol(tp, WAKE_ANY);
ocp_write_byte(tp, MCU_TYPE_PLA, PLA_CRWECR, CRWECR_CONFIG);
ocp_write_byte(tp, MCU_TYPE_PLA, PLA_CRWECR, CRWECR_NORAML);
} else {
__rtl_set_wol(tp, tp->saved_wolopts);
+ r8153_u2p3en(tp, true);
+ r8153_u1u2en(tp, true);
}
}
set_bit(PHY_RESET, &tp->flags);
}
-static void r8153_u1u2en(struct r8152 *tp, bool enable)
-{
- u8 u1u2[8];
-
- if (enable)
- memset(u1u2, 0xff, sizeof(u1u2));
- else
- memset(u1u2, 0x00, sizeof(u1u2));
-
- usb_ocp_write(tp, USB_TOLERANCE, BYTE_EN_SIX_BYTES, sizeof(u1u2), u1u2);
-}
-
-static void r8153_u2p3en(struct r8152 *tp, bool enable)
-{
- u32 ocp_data;
-
- ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_U2P3_CTRL);
- if (enable)
- ocp_data |= U2P3_ENABLE;
- else
- ocp_data &= ~U2P3_ENABLE;
- ocp_write_word(tp, MCU_TYPE_USB, USB_U2P3_CTRL, ocp_data);
-}
-
-static void r8153_power_cut_en(struct r8152 *tp, bool enable)
-{
- u32 ocp_data;
-
- ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_POWER_CUT);
- if (enable)
- ocp_data |= PWR_EN | PHASE2_EN;
- else
- ocp_data &= ~(PWR_EN | PHASE2_EN);
- ocp_write_word(tp, MCU_TYPE_USB, USB_POWER_CUT, ocp_data);
-
- ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_MISC_0);
- ocp_data &= ~PCUT_STATUS;
- ocp_write_word(tp, MCU_TYPE_USB, USB_MISC_0, ocp_data);
-}
-
static void r8153_first_init(struct r8152 *tp)
{
u32 ocp_data;
r8153_disable_aldps(tp);
rtl_disable(tp);
r8153_enable_aldps(tp);
+ usb_enable_lpm(tp->udev);
}
static int rtl8152_set_speed(struct r8152 *tp, u8 autoneg, u16 speed, u8 duplex)
if (test_bit(RTL8152_UNPLUG, &tp->flags))
return;
+ r8153_u1u2en(tp, false);
r8153_disable_aldps(tp);
r8153_first_init(tp);
r8153_enable_aldps(tp);
+ r8153_u2p3en(tp, true);
+ r8153_u1u2en(tp, true);
+ usb_enable_lpm(tp->udev);
}
static void rtl8153_down(struct r8152 *tp)
}
r8153_u1u2en(tp, false);
+ r8153_u2p3en(tp, false);
r8153_power_cut_en(tp, false);
r8153_disable_aldps(tp);
r8153_enter_oob(tp);
if (!netif_carrier_ok(netdev)) {
tp->rtl_ops.enable(tp);
set_bit(RTL8152_SET_RX_MODE, &tp->flags);
+ napi_disable(&tp->napi);
netif_carrier_on(netdev);
rtl_start_rx(tp);
+ napi_enable(&tp->napi);
}
} else {
if (netif_carrier_ok(netdev)) {
msleep(20);
}
+ usb_disable_lpm(tp->udev);
r8153_u2p3en(tp, false);
if (tp->version == RTL_VER_04) {
r8153_enable_aldps(tp);
r8152b_enable_fc(tp);
rtl_tally_reset(tp);
+ r8153_u2p3en(tp, true);
+}
+
+static int rtl8152_pre_reset(struct usb_interface *intf)
+{
+ struct r8152 *tp = usb_get_intfdata(intf);
+ struct net_device *netdev;
+
+ if (!tp)
+ return 0;
+
+ netdev = tp->netdev;
+ if (!netif_running(netdev))
+ return 0;
+
+ napi_disable(&tp->napi);
+ clear_bit(WORK_ENABLE, &tp->flags);
+ usb_kill_urb(tp->intr_urb);
+ cancel_delayed_work_sync(&tp->schedule);
+ if (netif_carrier_ok(netdev)) {
+ netif_stop_queue(netdev);
+ mutex_lock(&tp->control);
+ tp->rtl_ops.disable(tp);
+ mutex_unlock(&tp->control);
+ }
+
+ return 0;
+}
+
+static int rtl8152_post_reset(struct usb_interface *intf)
+{
+ struct r8152 *tp = usb_get_intfdata(intf);
+ struct net_device *netdev;
+
+ if (!tp)
+ return 0;
+
+ netdev = tp->netdev;
+ if (!netif_running(netdev))
+ return 0;
+
+ set_bit(WORK_ENABLE, &tp->flags);
+ if (netif_carrier_ok(netdev)) {
+ mutex_lock(&tp->control);
+ tp->rtl_ops.enable(tp);
+ rtl8152_set_rx_mode(netdev);
+ mutex_unlock(&tp->control);
+ netif_wake_queue(netdev);
+ }
+
+ napi_enable(&tp->napi);
+
+ return 0;
}
static int rtl8152_suspend(struct usb_interface *intf, pm_message_t message)
if (test_bit(SELECTIVE_SUSPEND, &tp->flags)) {
rtl_runtime_suspend_enable(tp, false);
clear_bit(SELECTIVE_SUSPEND, &tp->flags);
+ napi_disable(&tp->napi);
set_bit(WORK_ENABLE, &tp->flags);
if (netif_carrier_ok(tp->netdev))
rtl_start_rx(tp);
+ napi_enable(&tp->napi);
} else {
tp->rtl_ops.up(tp);
rtl8152_set_speed(tp, AUTONEG_ENABLE,
if (usb_autopm_get_interface(tp->intf) < 0)
return;
- mutex_lock(&tp->control);
-
- wol->supported = WAKE_ANY;
- wol->wolopts = __rtl_get_wol(tp);
-
- mutex_unlock(&tp->control);
+ if (!rtl_can_wakeup(tp)) {
+ wol->supported = 0;
+ wol->wolopts = 0;
+ } else {
+ mutex_lock(&tp->control);
+ wol->supported = WAKE_ANY;
+ wol->wolopts = __rtl_get_wol(tp);
+ mutex_unlock(&tp->control);
+ }
usb_autopm_put_interface(tp->intf);
}
struct r8152 *tp = netdev_priv(dev);
int ret;
+ if (!rtl_can_wakeup(tp))
+ return -EOPNOTSUPP;
+
ret = usb_autopm_get_interface(tp->intf);
if (ret < 0)
goto out_set_wol;
goto out1;
}
+ if (!rtl_can_wakeup(tp))
+ __rtl_set_wol(tp, 0);
+
tp->saved_wolopts = __rtl_get_wol(tp);
if (tp->saved_wolopts)
device_set_wakeup_enable(&udev->dev, true);
.suspend = rtl8152_suspend,
.resume = rtl8152_resume,
.reset_resume = rtl8152_resume,
+ .pre_reset = rtl8152_pre_reset,
+ .post_reset = rtl8152_post_reset,
.supports_autosuspend = 1,
.disable_hub_initiated_lpm = 1,
};
projects / cascardo / linux.git / blobdiff