#include "../wlcore/acx.h"
#include "../wlcore/tx.h"
#include "../wlcore/rx.h"
-#include "../wlcore/io.h"
#include "../wlcore/boot.h"
#include "wl12xx.h"
#include "reg.h"
#include "cmd.h"
#include "acx.h"
+#include "debugfs.h"
+
+static char *fref_param;
+static char *tcxo_param;
static struct wlcore_conf wl12xx_conf = {
.sg = {
.suspend_wake_up_event = CONF_WAKE_UP_EVENT_N_DTIM,
.suspend_listen_interval = 3,
.bcn_filt_mode = CONF_BCN_FILT_MODE_ENABLED,
- .bcn_filt_ie_count = 2,
+ .bcn_filt_ie_count = 3,
.bcn_filt_ie = {
[0] = {
.ie = WLAN_EID_CHANNEL_SWITCH,
.ie = WLAN_EID_HT_OPERATION,
.rule = CONF_BCN_RULE_PASS_ON_CHANGE,
},
+ [2] = {
+ .ie = WLAN_EID_ERP_INFO,
+ .rule = CONF_BCN_RULE_PASS_ON_CHANGE,
+ },
},
- .synch_fail_thold = 10,
- .bss_lose_timeout = 100,
+ .synch_fail_thold = 12,
+ .bss_lose_timeout = 400,
.beacon_rx_timeout = 10000,
.broadcast_timeout = 20000,
.rx_broadcast_in_ps = 1,
.psm_entry_retries = 8,
.psm_exit_retries = 16,
.psm_entry_nullfunc_retries = 3,
- .dynamic_ps_timeout = 40,
+ .dynamic_ps_timeout = 1500,
.forced_ps = false,
.keep_alive_interval = 55000,
.max_listen_interval = 20,
+ .sta_sleep_auth = WL1271_PSM_ILLEGAL,
},
.itrim = {
.enable = false,
},
.pm_config = {
.host_clk_settling_time = 5000,
- .host_fast_wakeup_support = false
+ .host_fast_wakeup_support = CONF_FAST_WAKEUP_DISABLE,
},
.roam_trigger = {
.trigger_pacing = 1,
.swallow_period = 5,
.n_divider_fref_set_1 = 0xff, /* default */
.n_divider_fref_set_2 = 12,
- .m_divider_fref_set_1 = 148,
- .m_divider_fref_set_2 = 0xffff, /* default */
+ .m_divider_fref_set_1 = 0xffff,
+ .m_divider_fref_set_2 = 148, /* default */
.coex_pll_stabilization_time = 0xffffffff, /* default */
.ldo_stabilization_time = 0xffff, /* default */
.fm_disturbed_band_margin = 0xff, /* default */
};
/* TODO: maybe move to a new header file? */
-#define WL127X_FW_NAME_MULTI "ti-connectivity/wl127x-fw-4-mr.bin"
-#define WL127X_FW_NAME_SINGLE "ti-connectivity/wl127x-fw-4-sr.bin"
-#define WL127X_PLT_FW_NAME "ti-connectivity/wl127x-fw-4-plt.bin"
+#define WL127X_FW_NAME_MULTI "ti-connectivity/wl127x-fw-5-mr.bin"
+#define WL127X_FW_NAME_SINGLE "ti-connectivity/wl127x-fw-5-sr.bin"
+#define WL127X_PLT_FW_NAME "ti-connectivity/wl127x-fw-5-plt.bin"
-#define WL128X_FW_NAME_MULTI "ti-connectivity/wl128x-fw-4-mr.bin"
-#define WL128X_FW_NAME_SINGLE "ti-connectivity/wl128x-fw-4-sr.bin"
-#define WL128X_PLT_FW_NAME "ti-connectivity/wl128x-fw-4-plt.bin"
+#define WL128X_FW_NAME_MULTI "ti-connectivity/wl128x-fw-5-mr.bin"
+#define WL128X_FW_NAME_SINGLE "ti-connectivity/wl128x-fw-5-sr.bin"
+#define WL128X_PLT_FW_NAME "ti-connectivity/wl128x-fw-5-plt.bin"
-static void wl127x_prepare_read(struct wl1271 *wl, u32 rx_desc, u32 len)
+static int wl127x_prepare_read(struct wl1271 *wl, u32 rx_desc, u32 len)
{
+ int ret;
+
if (wl->chip.id != CHIP_ID_1283_PG20) {
struct wl1271_acx_mem_map *wl_mem_map = wl->target_mem_map;
- struct wl1271_rx_mem_pool_addr rx_mem_addr;
+ struct wl127x_rx_mem_pool_addr rx_mem_addr;
/*
* Choose the block we want to read
rx_mem_addr.addr_extra = rx_mem_addr.addr + 4;
- wl1271_write(wl, WL1271_SLV_REG_DATA,
- &rx_mem_addr, sizeof(rx_mem_addr), false);
+ ret = wlcore_write(wl, WL1271_SLV_REG_DATA, &rx_mem_addr,
+ sizeof(rx_mem_addr), false);
+ if (ret < 0)
+ return ret;
}
+
+ return 0;
}
static int wl12xx_identify_chip(struct wl1271 *wl)
wl1271_warning("chip id 0x%x (1271 PG10) support is obsolete",
wl->chip.id);
- /* clear the alignment quirk, since we don't support it */
- wl->quirks &= ~WLCORE_QUIRK_TX_BLOCKSIZE_ALIGN;
-
- wl->quirks |= WLCORE_QUIRK_LEGACY_NVS;
+ wl->quirks |= WLCORE_QUIRK_LEGACY_NVS |
+ WLCORE_QUIRK_DUAL_PROBE_TMPL |
+ WLCORE_QUIRK_TKIP_HEADER_SPACE;
wl->sr_fw_name = WL127X_FW_NAME_SINGLE;
wl->mr_fw_name = WL127X_FW_NAME_MULTI;
memcpy(&wl->conf.mem, &wl12xx_default_priv_conf.mem_wl127x,
/* read data preparation is only needed by wl127x */
wl->ops->prepare_read = wl127x_prepare_read;
+ wlcore_set_min_fw_ver(wl, WL127X_CHIP_VER, WL127X_IFTYPE_VER,
+ WL127X_MAJOR_VER, WL127X_SUBTYPE_VER,
+ WL127X_MINOR_VER);
break;
case CHIP_ID_1271_PG20:
wl1271_debug(DEBUG_BOOT, "chip id 0x%x (1271 PG20)",
wl->chip.id);
- /* clear the alignment quirk, since we don't support it */
- wl->quirks &= ~WLCORE_QUIRK_TX_BLOCKSIZE_ALIGN;
-
- wl->quirks |= WLCORE_QUIRK_LEGACY_NVS;
+ wl->quirks |= WLCORE_QUIRK_LEGACY_NVS |
+ WLCORE_QUIRK_DUAL_PROBE_TMPL |
+ WLCORE_QUIRK_TKIP_HEADER_SPACE;
wl->plt_fw_name = WL127X_PLT_FW_NAME;
wl->sr_fw_name = WL127X_FW_NAME_SINGLE;
wl->mr_fw_name = WL127X_FW_NAME_MULTI;
/* read data preparation is only needed by wl127x */
wl->ops->prepare_read = wl127x_prepare_read;
+ wlcore_set_min_fw_ver(wl, WL127X_CHIP_VER, WL127X_IFTYPE_VER,
+ WL127X_MAJOR_VER, WL127X_SUBTYPE_VER,
+ WL127X_MINOR_VER);
break;
case CHIP_ID_1283_PG20:
wl->plt_fw_name = WL128X_PLT_FW_NAME;
wl->sr_fw_name = WL128X_FW_NAME_SINGLE;
wl->mr_fw_name = WL128X_FW_NAME_MULTI;
+
+ /* wl128x requires TX blocksize alignment */
+ wl->quirks |= WLCORE_QUIRK_TX_BLOCKSIZE_ALIGN |
+ WLCORE_QUIRK_DUAL_PROBE_TMPL |
+ WLCORE_QUIRK_TKIP_HEADER_SPACE;
+
+ wlcore_set_min_fw_ver(wl, WL128X_CHIP_VER, WL128X_IFTYPE_VER,
+ WL128X_MAJOR_VER, WL128X_SUBTYPE_VER,
+ WL128X_MINOR_VER);
break;
case CHIP_ID_1283_PG10:
default:
return ret;
}
-static void wl12xx_top_reg_write(struct wl1271 *wl, int addr, u16 val)
+static int __must_check wl12xx_top_reg_write(struct wl1271 *wl, int addr,
+ u16 val)
{
+ int ret;
+
/* write address >> 1 + 0x30000 to OCP_POR_CTR */
addr = (addr >> 1) + 0x30000;
- wl1271_write32(wl, WL12XX_OCP_POR_CTR, addr);
+ ret = wlcore_write32(wl, WL12XX_OCP_POR_CTR, addr);
+ if (ret < 0)
+ goto out;
/* write value to OCP_POR_WDATA */
- wl1271_write32(wl, WL12XX_OCP_DATA_WRITE, val);
+ ret = wlcore_write32(wl, WL12XX_OCP_DATA_WRITE, val);
+ if (ret < 0)
+ goto out;
/* write 1 to OCP_CMD */
- wl1271_write32(wl, WL12XX_OCP_CMD, OCP_CMD_WRITE);
+ ret = wlcore_write32(wl, WL12XX_OCP_CMD, OCP_CMD_WRITE);
+ if (ret < 0)
+ goto out;
+
+out:
+ return ret;
}
-static u16 wl12xx_top_reg_read(struct wl1271 *wl, int addr)
+static int __must_check wl12xx_top_reg_read(struct wl1271 *wl, int addr,
+ u16 *out)
{
u32 val;
int timeout = OCP_CMD_LOOP;
+ int ret;
/* write address >> 1 + 0x30000 to OCP_POR_CTR */
addr = (addr >> 1) + 0x30000;
- wl1271_write32(wl, WL12XX_OCP_POR_CTR, addr);
+ ret = wlcore_write32(wl, WL12XX_OCP_POR_CTR, addr);
+ if (ret < 0)
+ return ret;
/* write 2 to OCP_CMD */
- wl1271_write32(wl, WL12XX_OCP_CMD, OCP_CMD_READ);
+ ret = wlcore_write32(wl, WL12XX_OCP_CMD, OCP_CMD_READ);
+ if (ret < 0)
+ return ret;
/* poll for data ready */
do {
- val = wl1271_read32(wl, WL12XX_OCP_DATA_READ);
+ ret = wlcore_read32(wl, WL12XX_OCP_DATA_READ, &val);
+ if (ret < 0)
+ return ret;
} while (!(val & OCP_READY_MASK) && --timeout);
if (!timeout) {
wl1271_warning("Top register access timed out.");
- return 0xffff;
+ return -ETIMEDOUT;
}
/* check data status and return if OK */
- if ((val & OCP_STATUS_MASK) == OCP_STATUS_OK)
- return val & 0xffff;
- else {
+ if ((val & OCP_STATUS_MASK) != OCP_STATUS_OK) {
wl1271_warning("Top register access returned error.");
- return 0xffff;
+ return -EIO;
}
+
+ if (out)
+ *out = val & 0xffff;
+
+ return 0;
}
static int wl128x_switch_tcxo_to_fref(struct wl1271 *wl)
{
u16 spare_reg;
+ int ret;
/* Mask bits [2] & [8:4] in the sys_clk_cfg register */
- spare_reg = wl12xx_top_reg_read(wl, WL_SPARE_REG);
+ ret = wl12xx_top_reg_read(wl, WL_SPARE_REG, &spare_reg);
+ if (ret < 0)
+ return ret;
+
if (spare_reg == 0xFFFF)
return -EFAULT;
spare_reg |= (BIT(3) | BIT(5) | BIT(6));
- wl12xx_top_reg_write(wl, WL_SPARE_REG, spare_reg);
+ ret = wl12xx_top_reg_write(wl, WL_SPARE_REG, spare_reg);
+ if (ret < 0)
+ return ret;
/* Enable FREF_CLK_REQ & mux MCS and coex PLLs to FREF */
- wl12xx_top_reg_write(wl, SYS_CLK_CFG_REG,
- WL_CLK_REQ_TYPE_PG2 | MCS_PLL_CLK_SEL_FREF);
+ ret = wl12xx_top_reg_write(wl, SYS_CLK_CFG_REG,
+ WL_CLK_REQ_TYPE_PG2 | MCS_PLL_CLK_SEL_FREF);
+ if (ret < 0)
+ return ret;
/* Delay execution for 15msec, to let the HW settle */
mdelay(15);
static bool wl128x_is_tcxo_valid(struct wl1271 *wl)
{
u16 tcxo_detection;
+ int ret;
+
+ ret = wl12xx_top_reg_read(wl, TCXO_CLK_DETECT_REG, &tcxo_detection);
+ if (ret < 0)
+ return false;
- tcxo_detection = wl12xx_top_reg_read(wl, TCXO_CLK_DETECT_REG);
if (tcxo_detection & TCXO_DET_FAILED)
return false;
static bool wl128x_is_fref_valid(struct wl1271 *wl)
{
u16 fref_detection;
+ int ret;
+
+ ret = wl12xx_top_reg_read(wl, FREF_CLK_DETECT_REG, &fref_detection);
+ if (ret < 0)
+ return false;
- fref_detection = wl12xx_top_reg_read(wl, FREF_CLK_DETECT_REG);
if (fref_detection & FREF_CLK_DETECT_FAIL)
return false;
static int wl128x_manually_configure_mcs_pll(struct wl1271 *wl)
{
- wl12xx_top_reg_write(wl, MCS_PLL_M_REG, MCS_PLL_M_REG_VAL);
- wl12xx_top_reg_write(wl, MCS_PLL_N_REG, MCS_PLL_N_REG_VAL);
- wl12xx_top_reg_write(wl, MCS_PLL_CONFIG_REG, MCS_PLL_CONFIG_REG_VAL);
+ int ret;
- return 0;
+ ret = wl12xx_top_reg_write(wl, MCS_PLL_M_REG, MCS_PLL_M_REG_VAL);
+ if (ret < 0)
+ goto out;
+
+ ret = wl12xx_top_reg_write(wl, MCS_PLL_N_REG, MCS_PLL_N_REG_VAL);
+ if (ret < 0)
+ goto out;
+
+ ret = wl12xx_top_reg_write(wl, MCS_PLL_CONFIG_REG,
+ MCS_PLL_CONFIG_REG_VAL);
+
+out:
+ return ret;
}
static int wl128x_configure_mcs_pll(struct wl1271 *wl, int clk)
u16 spare_reg;
u16 pll_config;
u8 input_freq;
+ struct wl12xx_priv *priv = wl->priv;
+ int ret;
/* Mask bits [3:1] in the sys_clk_cfg register */
- spare_reg = wl12xx_top_reg_read(wl, WL_SPARE_REG);
+ ret = wl12xx_top_reg_read(wl, WL_SPARE_REG, &spare_reg);
+ if (ret < 0)
+ return ret;
+
if (spare_reg == 0xFFFF)
return -EFAULT;
spare_reg |= BIT(2);
- wl12xx_top_reg_write(wl, WL_SPARE_REG, spare_reg);
+ ret = wl12xx_top_reg_write(wl, WL_SPARE_REG, spare_reg);
+ if (ret < 0)
+ return ret;
/* Handle special cases of the TCXO clock */
- if (wl->tcxo_clock == WL12XX_TCXOCLOCK_16_8 ||
- wl->tcxo_clock == WL12XX_TCXOCLOCK_33_6)
+ if (priv->tcxo_clock == WL12XX_TCXOCLOCK_16_8 ||
+ priv->tcxo_clock == WL12XX_TCXOCLOCK_33_6)
return wl128x_manually_configure_mcs_pll(wl);
/* Set the input frequency according to the selected clock source */
input_freq = (clk & 1) + 1;
- pll_config = wl12xx_top_reg_read(wl, MCS_PLL_CONFIG_REG);
+ ret = wl12xx_top_reg_read(wl, MCS_PLL_CONFIG_REG, &pll_config);
+ if (ret < 0)
+ return ret;
+
if (pll_config == 0xFFFF)
return -EFAULT;
pll_config |= (input_freq << MCS_SEL_IN_FREQ_SHIFT);
pll_config |= MCS_PLL_ENABLE_HP;
- wl12xx_top_reg_write(wl, MCS_PLL_CONFIG_REG, pll_config);
+ ret = wl12xx_top_reg_write(wl, MCS_PLL_CONFIG_REG, pll_config);
- return 0;
+ return ret;
}
/*
*/
static int wl128x_boot_clk(struct wl1271 *wl, int *selected_clock)
{
+ struct wl12xx_priv *priv = wl->priv;
u16 sys_clk_cfg;
+ int ret;
/* For XTAL-only modes, FREF will be used after switching from TCXO */
- if (wl->ref_clock == WL12XX_REFCLOCK_26_XTAL ||
- wl->ref_clock == WL12XX_REFCLOCK_38_XTAL) {
+ if (priv->ref_clock == WL12XX_REFCLOCK_26_XTAL ||
+ priv->ref_clock == WL12XX_REFCLOCK_38_XTAL) {
if (!wl128x_switch_tcxo_to_fref(wl))
return -EINVAL;
goto fref_clk;
}
/* Query the HW, to determine which clock source we should use */
- sys_clk_cfg = wl12xx_top_reg_read(wl, SYS_CLK_CFG_REG);
+ ret = wl12xx_top_reg_read(wl, SYS_CLK_CFG_REG, &sys_clk_cfg);
+ if (ret < 0)
+ return ret;
+
if (sys_clk_cfg == 0xFFFF)
return -EINVAL;
if (sys_clk_cfg & PRCM_CM_EN_MUX_WLAN_FREF)
goto fref_clk;
/* If TCXO is either 32.736MHz or 16.368MHz, switch to FREF */
- if (wl->tcxo_clock == WL12XX_TCXOCLOCK_16_368 ||
- wl->tcxo_clock == WL12XX_TCXOCLOCK_32_736) {
+ if (priv->tcxo_clock == WL12XX_TCXOCLOCK_16_368 ||
+ priv->tcxo_clock == WL12XX_TCXOCLOCK_32_736) {
if (!wl128x_switch_tcxo_to_fref(wl))
return -EINVAL;
goto fref_clk;
/* TCXO clock is selected */
if (!wl128x_is_tcxo_valid(wl))
return -EINVAL;
- *selected_clock = wl->tcxo_clock;
+ *selected_clock = priv->tcxo_clock;
goto config_mcs_pll;
fref_clk:
/* FREF clock is selected */
if (!wl128x_is_fref_valid(wl))
return -EINVAL;
- *selected_clock = wl->ref_clock;
+ *selected_clock = priv->ref_clock;
config_mcs_pll:
return wl128x_configure_mcs_pll(wl, *selected_clock);
static int wl127x_boot_clk(struct wl1271 *wl)
{
+ struct wl12xx_priv *priv = wl->priv;
u32 pause;
u32 clk;
+ int ret;
if (WL127X_PG_GET_MAJOR(wl->hw_pg_ver) < 3)
wl->quirks |= WLCORE_QUIRK_END_OF_TRANSACTION;
- if (wl->ref_clock == CONF_REF_CLK_19_2_E ||
- wl->ref_clock == CONF_REF_CLK_38_4_E ||
- wl->ref_clock == CONF_REF_CLK_38_4_M_XTAL)
+ if (priv->ref_clock == CONF_REF_CLK_19_2_E ||
+ priv->ref_clock == CONF_REF_CLK_38_4_E ||
+ priv->ref_clock == CONF_REF_CLK_38_4_M_XTAL)
/* ref clk: 19.2/38.4/38.4-XTAL */
clk = 0x3;
- else if (wl->ref_clock == CONF_REF_CLK_26_E ||
- wl->ref_clock == CONF_REF_CLK_52_E)
+ else if (priv->ref_clock == CONF_REF_CLK_26_E ||
+ priv->ref_clock == CONF_REF_CLK_26_M_XTAL ||
+ priv->ref_clock == CONF_REF_CLK_52_E)
/* ref clk: 26/52 */
clk = 0x5;
else
return -EINVAL;
- if (wl->ref_clock != CONF_REF_CLK_19_2_E) {
+ if (priv->ref_clock != CONF_REF_CLK_19_2_E) {
u16 val;
/* Set clock type (open drain) */
- val = wl12xx_top_reg_read(wl, OCP_REG_CLK_TYPE);
+ ret = wl12xx_top_reg_read(wl, OCP_REG_CLK_TYPE, &val);
+ if (ret < 0)
+ goto out;
+
val &= FREF_CLK_TYPE_BITS;
- wl12xx_top_reg_write(wl, OCP_REG_CLK_TYPE, val);
+ ret = wl12xx_top_reg_write(wl, OCP_REG_CLK_TYPE, val);
+ if (ret < 0)
+ goto out;
/* Set clock pull mode (no pull) */
- val = wl12xx_top_reg_read(wl, OCP_REG_CLK_PULL);
+ ret = wl12xx_top_reg_read(wl, OCP_REG_CLK_PULL, &val);
+ if (ret < 0)
+ goto out;
+
val |= NO_PULL;
- wl12xx_top_reg_write(wl, OCP_REG_CLK_PULL, val);
+ ret = wl12xx_top_reg_write(wl, OCP_REG_CLK_PULL, val);
+ if (ret < 0)
+ goto out;
} else {
u16 val;
/* Set clock polarity */
- val = wl12xx_top_reg_read(wl, OCP_REG_CLK_POLARITY);
+ ret = wl12xx_top_reg_read(wl, OCP_REG_CLK_POLARITY, &val);
+ if (ret < 0)
+ goto out;
+
val &= FREF_CLK_POLARITY_BITS;
val |= CLK_REQ_OUTN_SEL;
- wl12xx_top_reg_write(wl, OCP_REG_CLK_POLARITY, val);
+ ret = wl12xx_top_reg_write(wl, OCP_REG_CLK_POLARITY, val);
+ if (ret < 0)
+ goto out;
}
- wl1271_write32(wl, WL12XX_PLL_PARAMETERS, clk);
+ ret = wlcore_write32(wl, WL12XX_PLL_PARAMETERS, clk);
+ if (ret < 0)
+ goto out;
- pause = wl1271_read32(wl, WL12XX_PLL_PARAMETERS);
+ ret = wlcore_read32(wl, WL12XX_PLL_PARAMETERS, &pause);
+ if (ret < 0)
+ goto out;
wl1271_debug(DEBUG_BOOT, "pause1 0x%x", pause);
pause &= ~(WU_COUNTER_PAUSE_VAL);
pause |= WU_COUNTER_PAUSE_VAL;
- wl1271_write32(wl, WL12XX_WU_COUNTER_PAUSE, pause);
+ ret = wlcore_write32(wl, WL12XX_WU_COUNTER_PAUSE, pause);
- return 0;
+out:
+ return ret;
}
static int wl1271_boot_soft_reset(struct wl1271 *wl)
{
unsigned long timeout;
u32 boot_data;
+ int ret = 0;
/* perform soft reset */
- wl1271_write32(wl, WL12XX_SLV_SOFT_RESET, ACX_SLV_SOFT_RESET_BIT);
+ ret = wlcore_write32(wl, WL12XX_SLV_SOFT_RESET, ACX_SLV_SOFT_RESET_BIT);
+ if (ret < 0)
+ goto out;
/* SOFT_RESET is self clearing */
timeout = jiffies + usecs_to_jiffies(SOFT_RESET_MAX_TIME);
while (1) {
- boot_data = wl1271_read32(wl, WL12XX_SLV_SOFT_RESET);
+ ret = wlcore_read32(wl, WL12XX_SLV_SOFT_RESET, &boot_data);
+ if (ret < 0)
+ goto out;
+
wl1271_debug(DEBUG_BOOT, "soft reset bootdata 0x%x", boot_data);
if ((boot_data & ACX_SLV_SOFT_RESET_BIT) == 0)
break;
}
/* disable Rx/Tx */
- wl1271_write32(wl, WL12XX_ENABLE, 0x0);
+ ret = wlcore_write32(wl, WL12XX_ENABLE, 0x0);
+ if (ret < 0)
+ goto out;
/* disable auto calibration on start*/
- wl1271_write32(wl, WL12XX_SPARE_A2, 0xffff);
+ ret = wlcore_write32(wl, WL12XX_SPARE_A2, 0xffff);
- return 0;
+out:
+ return ret;
}
static int wl12xx_pre_boot(struct wl1271 *wl)
{
+ struct wl12xx_priv *priv = wl->priv;
int ret = 0;
u32 clk;
int selected_clock = -1;
}
/* Continue the ELP wake up sequence */
- wl1271_write32(wl, WL12XX_WELP_ARM_COMMAND, WELP_ARM_COMMAND_VAL);
+ ret = wlcore_write32(wl, WL12XX_WELP_ARM_COMMAND, WELP_ARM_COMMAND_VAL);
+ if (ret < 0)
+ goto out;
+
udelay(500);
- wlcore_set_partition(wl, &wl->ptable[PART_DRPW]);
+ ret = wlcore_set_partition(wl, &wl->ptable[PART_DRPW]);
+ if (ret < 0)
+ goto out;
/* Read-modify-write DRPW_SCRATCH_START register (see next state)
to be used by DRPw FW. The RTRIM value will be added by the FW
before taking DRPw out of reset */
- clk = wl1271_read32(wl, WL12XX_DRPW_SCRATCH_START);
+ ret = wlcore_read32(wl, WL12XX_DRPW_SCRATCH_START, &clk);
+ if (ret < 0)
+ goto out;
wl1271_debug(DEBUG_BOOT, "clk2 0x%x", clk);
if (wl->chip.id == CHIP_ID_1283_PG20)
clk |= ((selected_clock & 0x3) << 1) << 4;
else
- clk |= (wl->ref_clock << 1) << 4;
+ clk |= (priv->ref_clock << 1) << 4;
- wl1271_write32(wl, WL12XX_DRPW_SCRATCH_START, clk);
+ ret = wlcore_write32(wl, WL12XX_DRPW_SCRATCH_START, clk);
+ if (ret < 0)
+ goto out;
- wlcore_set_partition(wl, &wl->ptable[PART_WORK]);
+ ret = wlcore_set_partition(wl, &wl->ptable[PART_WORK]);
+ if (ret < 0)
+ goto out;
/* Disable interrupts */
- wlcore_write_reg(wl, REG_INTERRUPT_MASK, WL1271_ACX_INTR_ALL);
+ ret = wlcore_write_reg(wl, REG_INTERRUPT_MASK, WL1271_ACX_INTR_ALL);
+ if (ret < 0)
+ goto out;
ret = wl1271_boot_soft_reset(wl);
if (ret < 0)
return ret;
}
-static void wl12xx_pre_upload(struct wl1271 *wl)
+static int wl12xx_pre_upload(struct wl1271 *wl)
{
u32 tmp;
+ u16 polarity;
+ int ret;
/* write firmware's last address (ie. it's length) to
* ACX_EEPROMLESS_IND_REG */
wl1271_debug(DEBUG_BOOT, "ACX_EEPROMLESS_IND_REG");
- wl1271_write32(wl, WL12XX_EEPROMLESS_IND, WL12XX_EEPROMLESS_IND);
+ ret = wlcore_write32(wl, WL12XX_EEPROMLESS_IND, WL12XX_EEPROMLESS_IND);
+ if (ret < 0)
+ goto out;
- tmp = wlcore_read_reg(wl, REG_CHIP_ID_B);
+ ret = wlcore_read_reg(wl, REG_CHIP_ID_B, &tmp);
+ if (ret < 0)
+ goto out;
wl1271_debug(DEBUG_BOOT, "chip id 0x%x", tmp);
/* 6. read the EEPROM parameters */
- tmp = wl1271_read32(wl, WL12XX_SCR_PAD2);
+ ret = wlcore_read32(wl, WL12XX_SCR_PAD2, &tmp);
+ if (ret < 0)
+ goto out;
/* WL1271: The reference driver skips steps 7 to 10 (jumps directly
* to upload_fw) */
- if (wl->chip.id == CHIP_ID_1283_PG20)
- wl12xx_top_reg_write(wl, SDIO_IO_DS, HCI_IO_DS_6MA);
-}
-
-static void wl12xx_enable_interrupts(struct wl1271 *wl)
-{
- u32 polarity;
+ if (wl->chip.id == CHIP_ID_1283_PG20) {
+ ret = wl12xx_top_reg_write(wl, SDIO_IO_DS, HCI_IO_DS_6MA);
+ if (ret < 0)
+ goto out;
+ }
- polarity = wl12xx_top_reg_read(wl, OCP_REG_POLARITY);
+ /* polarity must be set before the firmware is loaded */
+ ret = wl12xx_top_reg_read(wl, OCP_REG_POLARITY, &polarity);
+ if (ret < 0)
+ goto out;
/* We use HIGH polarity, so unset the LOW bit */
polarity &= ~POLARITY_LOW;
- wl12xx_top_reg_write(wl, OCP_REG_POLARITY, polarity);
+ ret = wl12xx_top_reg_write(wl, OCP_REG_POLARITY, polarity);
+
+out:
+ return ret;
+}
- wlcore_write_reg(wl, REG_INTERRUPT_MASK, WL1271_ACX_ALL_EVENTS_VECTOR);
+static int wl12xx_enable_interrupts(struct wl1271 *wl)
+{
+ int ret;
+
+ ret = wlcore_write_reg(wl, REG_INTERRUPT_MASK,
+ WL12XX_ACX_ALL_EVENTS_VECTOR);
+ if (ret < 0)
+ goto out;
wlcore_enable_interrupts(wl);
- wlcore_write_reg(wl, REG_INTERRUPT_MASK,
- WL1271_ACX_INTR_ALL & ~(WL1271_INTR_MASK));
+ ret = wlcore_write_reg(wl, REG_INTERRUPT_MASK,
+ WL1271_ACX_INTR_ALL & ~(WL12XX_INTR_MASK));
+ if (ret < 0)
+ goto disable_interrupts;
+
+ ret = wlcore_write32(wl, WL12XX_HI_CFG, HI_CFG_DEF_VAL);
+ if (ret < 0)
+ goto disable_interrupts;
- wl1271_write32(wl, WL12XX_HI_CFG, HI_CFG_DEF_VAL);
+ return ret;
+
+disable_interrupts:
+ wlcore_disable_interrupts(wl);
+
+out:
+ return ret;
}
static int wl12xx_boot(struct wl1271 *wl)
if (ret < 0)
goto out;
- wl12xx_pre_upload(wl);
+ ret = wl12xx_pre_upload(wl);
+ if (ret < 0)
+ goto out;
ret = wlcore_boot_upload_firmware(wl);
if (ret < 0)
if (ret < 0)
goto out;
- wl12xx_enable_interrupts(wl);
+ ret = wl12xx_enable_interrupts(wl);
out:
return ret;
}
-static void wl12xx_trigger_cmd(struct wl1271 *wl, int cmd_box_addr,
+static int wl12xx_trigger_cmd(struct wl1271 *wl, int cmd_box_addr,
void *buf, size_t len)
{
- wl1271_write(wl, cmd_box_addr, buf, len, false);
- wlcore_write_reg(wl, REG_INTERRUPT_TRIG, WL12XX_INTR_TRIG_CMD);
+ int ret;
+
+ ret = wlcore_write(wl, cmd_box_addr, buf, len, false);
+ if (ret < 0)
+ return ret;
+
+ ret = wlcore_write_reg(wl, REG_INTERRUPT_TRIG, WL12XX_INTR_TRIG_CMD);
+
+ return ret;
}
-static void wl12xx_ack_event(struct wl1271 *wl)
+static int wl12xx_ack_event(struct wl1271 *wl)
{
- wlcore_write_reg(wl, REG_INTERRUPT_TRIG, WL12XX_INTR_TRIG_EVENT_ACK);
+ return wlcore_write_reg(wl, REG_INTERRUPT_TRIG,
+ WL12XX_INTR_TRIG_EVENT_ACK);
}
static u32 wl12xx_calc_tx_blocks(struct wl1271 *wl, u32 len, u32 spare_blks)
return data_len - sizeof(*desc) - desc->pad_len;
}
-static void wl12xx_tx_delayed_compl(struct wl1271 *wl)
+static int wl12xx_tx_delayed_compl(struct wl1271 *wl)
{
- if (wl->fw_status->tx_results_counter == (wl->tx_results_count & 0xff))
- return;
+ if (wl->fw_status_1->tx_results_counter ==
+ (wl->tx_results_count & 0xff))
+ return 0;
- wl1271_tx_complete(wl);
+ return wlcore_tx_complete(wl);
}
static int wl12xx_hw_init(struct wl1271 *wl)
ret = wl128x_cmd_general_parms(wl);
if (ret < 0)
goto out;
+
+ /*
+ * If we are in calibrator based auto detect then we got the FEM nr
+ * in wl->fem_manuf. No need to continue further
+ */
+ if (wl->plt_mode == PLT_FEM_DETECT)
+ goto out;
+
ret = wl128x_cmd_radio_parms(wl);
if (ret < 0)
goto out;
ret = wl1271_cmd_general_parms(wl);
if (ret < 0)
goto out;
+
+ /*
+ * If we are in calibrator based auto detect then we got the FEM nr
+ * in wl->fem_manuf. No need to continue further
+ */
+ if (wl->plt_mode == PLT_FEM_DETECT)
+ goto out;
+
ret = wl1271_cmd_radio_parms(wl);
if (ret < 0)
goto out;
return supported;
}
-static void wl12xx_get_fuse_mac(struct wl1271 *wl)
+static int wl12xx_get_fuse_mac(struct wl1271 *wl)
{
u32 mac1, mac2;
+ int ret;
+
+ ret = wlcore_set_partition(wl, &wl->ptable[PART_DRPW]);
+ if (ret < 0)
+ goto out;
- wlcore_set_partition(wl, &wl->ptable[PART_DRPW]);
+ ret = wlcore_read32(wl, WL12XX_REG_FUSE_BD_ADDR_1, &mac1);
+ if (ret < 0)
+ goto out;
- mac1 = wl1271_read32(wl, WL12XX_REG_FUSE_BD_ADDR_1);
- mac2 = wl1271_read32(wl, WL12XX_REG_FUSE_BD_ADDR_2);
+ ret = wlcore_read32(wl, WL12XX_REG_FUSE_BD_ADDR_2, &mac2);
+ if (ret < 0)
+ goto out;
/* these are the two parts of the BD_ADDR */
wl->fuse_oui_addr = ((mac2 & 0xffff) << 8) +
((mac1 & 0xff000000) >> 24);
wl->fuse_nic_addr = mac1 & 0xffffff;
- wlcore_set_partition(wl, &wl->ptable[PART_DOWN]);
+ ret = wlcore_set_partition(wl, &wl->ptable[PART_DOWN]);
+
+out:
+ return ret;
}
-static s8 wl12xx_get_pg_ver(struct wl1271 *wl)
+static int wl12xx_get_pg_ver(struct wl1271 *wl, s8 *ver)
{
- u32 die_info;
+ u16 die_info;
+ int ret;
if (wl->chip.id == CHIP_ID_1283_PG20)
- die_info = wl12xx_top_reg_read(wl, WL128X_REG_FUSE_DATA_2_1);
+ ret = wl12xx_top_reg_read(wl, WL128X_REG_FUSE_DATA_2_1,
+ &die_info);
else
- die_info = wl12xx_top_reg_read(wl, WL127X_REG_FUSE_DATA_2_1);
+ ret = wl12xx_top_reg_read(wl, WL127X_REG_FUSE_DATA_2_1,
+ &die_info);
- return (s8) (die_info & PG_VER_MASK) >> PG_VER_OFFSET;
+ if (ret >= 0 && ver)
+ *ver = (s8)((die_info & PG_VER_MASK) >> PG_VER_OFFSET);
+
+ return ret;
}
-static void wl12xx_get_mac(struct wl1271 *wl)
+static int wl12xx_get_mac(struct wl1271 *wl)
{
if (wl12xx_mac_in_fuse(wl))
- wl12xx_get_fuse_mac(wl);
+ return wl12xx_get_fuse_mac(wl);
+
+ return 0;
+}
+
+static void wl12xx_set_tx_desc_csum(struct wl1271 *wl,
+ struct wl1271_tx_hw_descr *desc,
+ struct sk_buff *skb)
+{
+ desc->wl12xx_reserved = 0;
+}
+
+static int wl12xx_plt_init(struct wl1271 *wl)
+{
+ int ret;
+
+ ret = wl->ops->boot(wl);
+ if (ret < 0)
+ goto out;
+
+ ret = wl->ops->hw_init(wl);
+ if (ret < 0)
+ goto out_irq_disable;
+
+ /*
+ * If we are in calibrator based auto detect then we got the FEM nr
+ * in wl->fem_manuf. No need to continue further
+ */
+ if (wl->plt_mode == PLT_FEM_DETECT)
+ goto out;
+
+ ret = wl1271_acx_init_mem_config(wl);
+ if (ret < 0)
+ goto out_irq_disable;
+
+ ret = wl12xx_acx_mem_cfg(wl);
+ if (ret < 0)
+ goto out_free_memmap;
+
+ /* Enable data path */
+ ret = wl1271_cmd_data_path(wl, 1);
+ if (ret < 0)
+ goto out_free_memmap;
+
+ /* Configure for CAM power saving (ie. always active) */
+ ret = wl1271_acx_sleep_auth(wl, WL1271_PSM_CAM);
+ if (ret < 0)
+ goto out_free_memmap;
+
+ /* configure PM */
+ ret = wl1271_acx_pm_config(wl);
+ if (ret < 0)
+ goto out_free_memmap;
+
+ goto out;
+
+out_free_memmap:
+ kfree(wl->target_mem_map);
+ wl->target_mem_map = NULL;
+
+out_irq_disable:
+ mutex_unlock(&wl->mutex);
+ /* Unlocking the mutex in the middle of handling is
+ inherently unsafe. In this case we deem it safe to do,
+ because we need to let any possibly pending IRQ out of
+ the system (and while we are WL1271_STATE_OFF the IRQ
+ work function will not do anything.) Also, any other
+ possible concurrent operations will fail due to the
+ current state, hence the wl1271 struct should be safe. */
+ wlcore_disable_interrupts(wl);
+ mutex_lock(&wl->mutex);
+out:
+ return ret;
+}
+
+static int wl12xx_get_spare_blocks(struct wl1271 *wl, bool is_gem)
+{
+ if (is_gem)
+ return WL12XX_TX_HW_BLOCK_GEM_SPARE;
+
+ return WL12XX_TX_HW_BLOCK_SPARE_DEFAULT;
}
+static int wl12xx_set_key(struct wl1271 *wl, enum set_key_cmd cmd,
+ struct ieee80211_vif *vif,
+ struct ieee80211_sta *sta,
+ struct ieee80211_key_conf *key_conf)
+{
+ return wlcore_set_key(wl, cmd, vif, sta, key_conf);
+}
+
+static int wl12xx_setup(struct wl1271 *wl);
+
static struct wlcore_ops wl12xx_ops = {
+ .setup = wl12xx_setup,
.identify_chip = wl12xx_identify_chip,
.identify_fw = wl12xx_identify_fw,
.boot = wl12xx_boot,
+ .plt_init = wl12xx_plt_init,
.trigger_cmd = wl12xx_trigger_cmd,
.ack_event = wl12xx_ack_event,
.calc_tx_blocks = wl12xx_calc_tx_blocks,
.sta_get_ap_rate_mask = wl12xx_sta_get_ap_rate_mask,
.get_pg_ver = wl12xx_get_pg_ver,
.get_mac = wl12xx_get_mac,
+ .set_tx_desc_csum = wl12xx_set_tx_desc_csum,
+ .set_rx_csum = NULL,
+ .ap_get_mimo_wide_rate_mask = NULL,
+ .debugfs_init = wl12xx_debugfs_add_files,
+ .get_spare_blocks = wl12xx_get_spare_blocks,
+ .set_key = wl12xx_set_key,
+ .pre_pkt_send = NULL,
};
static struct ieee80211_sta_ht_cap wl12xx_ht_cap = {
},
};
+static int wl12xx_setup(struct wl1271 *wl)
+{
+ struct wl12xx_priv *priv = wl->priv;
+ struct wl12xx_platform_data *pdata = wl->pdev->dev.platform_data;
+
+ wl->rtable = wl12xx_rtable;
+ wl->num_tx_desc = WL12XX_NUM_TX_DESCRIPTORS;
+ wl->num_rx_desc = WL12XX_NUM_RX_DESCRIPTORS;
+ wl->num_mac_addr = WL12XX_NUM_MAC_ADDRESSES;
+ wl->band_rate_to_idx = wl12xx_band_rate_to_idx;
+ wl->hw_tx_rate_tbl_size = WL12XX_CONF_HW_RXTX_RATE_MAX;
+ wl->hw_min_ht_rate = WL12XX_CONF_HW_RXTX_RATE_MCS0;
+ wl->fw_status_priv_len = 0;
+ wl->stats.fw_stats_len = sizeof(struct wl12xx_acx_statistics);
+ wlcore_set_ht_cap(wl, IEEE80211_BAND_2GHZ, &wl12xx_ht_cap);
+ wlcore_set_ht_cap(wl, IEEE80211_BAND_5GHZ, &wl12xx_ht_cap);
+ wl12xx_conf_init(wl);
+
+ if (!fref_param) {
+ priv->ref_clock = pdata->board_ref_clock;
+ } else {
+ if (!strcmp(fref_param, "19.2"))
+ priv->ref_clock = WL12XX_REFCLOCK_19;
+ else if (!strcmp(fref_param, "26"))
+ priv->ref_clock = WL12XX_REFCLOCK_26;
+ else if (!strcmp(fref_param, "26x"))
+ priv->ref_clock = WL12XX_REFCLOCK_26_XTAL;
+ else if (!strcmp(fref_param, "38.4"))
+ priv->ref_clock = WL12XX_REFCLOCK_38;
+ else if (!strcmp(fref_param, "38.4x"))
+ priv->ref_clock = WL12XX_REFCLOCK_38_XTAL;
+ else if (!strcmp(fref_param, "52"))
+ priv->ref_clock = WL12XX_REFCLOCK_52;
+ else
+ wl1271_error("Invalid fref parameter %s", fref_param);
+ }
+
+ if (!tcxo_param) {
+ priv->tcxo_clock = pdata->board_tcxo_clock;
+ } else {
+ if (!strcmp(tcxo_param, "19.2"))
+ priv->tcxo_clock = WL12XX_TCXOCLOCK_19_2;
+ else if (!strcmp(tcxo_param, "26"))
+ priv->tcxo_clock = WL12XX_TCXOCLOCK_26;
+ else if (!strcmp(tcxo_param, "38.4"))
+ priv->tcxo_clock = WL12XX_TCXOCLOCK_38_4;
+ else if (!strcmp(tcxo_param, "52"))
+ priv->tcxo_clock = WL12XX_TCXOCLOCK_52;
+ else if (!strcmp(tcxo_param, "16.368"))
+ priv->tcxo_clock = WL12XX_TCXOCLOCK_16_368;
+ else if (!strcmp(tcxo_param, "32.736"))
+ priv->tcxo_clock = WL12XX_TCXOCLOCK_32_736;
+ else if (!strcmp(tcxo_param, "16.8"))
+ priv->tcxo_clock = WL12XX_TCXOCLOCK_16_8;
+ else if (!strcmp(tcxo_param, "33.6"))
+ priv->tcxo_clock = WL12XX_TCXOCLOCK_33_6;
+ else
+ wl1271_error("Invalid tcxo parameter %s", tcxo_param);
+ }
+
+ return 0;
+}
+
static int __devinit wl12xx_probe(struct platform_device *pdev)
{
struct wl1271 *wl;
struct ieee80211_hw *hw;
- struct wl12xx_priv *priv;
+ int ret;
- hw = wlcore_alloc_hw(sizeof(*priv));
+ hw = wlcore_alloc_hw(sizeof(struct wl12xx_priv),
+ WL12XX_AGGR_BUFFER_SIZE);
if (IS_ERR(hw)) {
wl1271_error("can't allocate hw");
- return PTR_ERR(hw);
+ ret = PTR_ERR(hw);
+ goto out;
}
wl = hw->priv;
wl->ops = &wl12xx_ops;
wl->ptable = wl12xx_ptable;
- wl->rtable = wl12xx_rtable;
- wl->num_tx_desc = 16;
- wl->normal_tx_spare = WL12XX_TX_HW_BLOCK_SPARE_DEFAULT;
- wl->gem_tx_spare = WL12XX_TX_HW_BLOCK_GEM_SPARE;
- wl->band_rate_to_idx = wl12xx_band_rate_to_idx;
- wl->hw_tx_rate_tbl_size = WL12XX_CONF_HW_RXTX_RATE_MAX;
- wl->hw_min_ht_rate = WL12XX_CONF_HW_RXTX_RATE_MCS0;
- wl->fw_status_priv_len = 0;
- memcpy(&wl->ht_cap, &wl12xx_ht_cap, sizeof(wl12xx_ht_cap));
- wl12xx_conf_init(wl);
+ ret = wlcore_probe(wl, pdev);
+ if (ret)
+ goto out_free;
+
+ return ret;
- return wlcore_probe(wl, pdev);
+out_free:
+ wlcore_free_hw(wl);
+out:
+ return ret;
}
static const struct platform_device_id wl12xx_id_table[] __devinitconst = {
}
};
-static int __init wl12xx_init(void)
-{
- return platform_driver_register(&wl12xx_driver);
-}
-module_init(wl12xx_init);
+module_platform_driver(wl12xx_driver);
-static void __exit wl12xx_exit(void)
-{
- platform_driver_unregister(&wl12xx_driver);
-}
-module_exit(wl12xx_exit);
+module_param_named(fref, fref_param, charp, 0);
+MODULE_PARM_DESC(fref, "FREF clock: 19.2, 26, 26x, 38.4, 38.4x, 52");
+
+module_param_named(tcxo, tcxo_param, charp, 0);
+MODULE_PARM_DESC(tcxo,
+ "TCXO clock: 19.2, 26, 38.4, 52, 16.368, 32.736, 16.8, 33.6");
MODULE_LICENSE("GPL v2");
MODULE_AUTHOR("Luciano Coelho <coelho@ti.com>");
projects / cascardo / linux.git / blobdiff