#include <linux/dmi.h>
#include <linux/pci-aspm.h>
#include <linux/ioport.h>
+#include <linux/sched.h>
+#include <linux/ktime.h>
#include <asm/dma.h> /* isa_dma_bridge_buggy */
#include "pci.h"
-/*
- * This quirk function disables memory decoding and releases memory resources
- * of the device specified by kernel's boot parameter 'pci=resource_alignment='.
- * It also rounds up size to specified alignment.
- * Later on, the kernel will assign page-aligned memory resource back
- * to the device.
- */
-static void __devinit quirk_resource_alignment(struct pci_dev *dev)
-{
- int i;
- struct resource *r;
- resource_size_t align, size;
- u16 command;
-
- if (!pci_is_reassigndev(dev))
- return;
-
- if (dev->hdr_type == PCI_HEADER_TYPE_NORMAL &&
- (dev->class >> 8) == PCI_CLASS_BRIDGE_HOST) {
- dev_warn(&dev->dev,
- "Can't reassign resources to host bridge.\n");
- return;
- }
-
- dev_info(&dev->dev,
- "Disabling memory decoding and releasing memory resources.\n");
- pci_read_config_word(dev, PCI_COMMAND, &command);
- command &= ~PCI_COMMAND_MEMORY;
- pci_write_config_word(dev, PCI_COMMAND, command);
-
- align = pci_specified_resource_alignment(dev);
- for (i=0; i < PCI_BRIDGE_RESOURCES; i++) {
- r = &dev->resource[i];
- if (!(r->flags & IORESOURCE_MEM))
- continue;
- size = resource_size(r);
- if (size < align) {
- size = align;
- dev_info(&dev->dev,
- "Rounding up size of resource #%d to %#llx.\n",
- i, (unsigned long long)size);
- }
- r->end = size - 1;
- r->start = 0;
- }
- /* Need to disable bridge's resource window,
- * to enable the kernel to reassign new resource
- * window later on.
- */
- if (dev->hdr_type == PCI_HEADER_TYPE_BRIDGE &&
- (dev->class >> 8) == PCI_CLASS_BRIDGE_PCI) {
- for (i = PCI_BRIDGE_RESOURCES; i < PCI_NUM_RESOURCES; i++) {
- r = &dev->resource[i];
- if (!(r->flags & IORESOURCE_MEM))
- continue;
- r->end = resource_size(r) - 1;
- r->start = 0;
- }
- pci_disable_bridge_window(dev);
- }
-}
-DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, quirk_resource_alignment);
-
/*
* Decoding should be disabled for a PCI device during BAR sizing to avoid
* conflict. But doing so may cause problems on host bridge and perhaps other
*/
static void __devinit quirk_mmio_always_on(struct pci_dev *dev)
{
- if ((dev->class >> 8) == PCI_CLASS_BRIDGE_HOST)
- dev->mmio_always_on = 1;
+ dev->mmio_always_on = 1;
}
-DECLARE_PCI_FIXUP_EARLY(PCI_ANY_ID, PCI_ANY_ID, quirk_mmio_always_on);
+DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_ANY_ID, PCI_ANY_ID,
+ PCI_CLASS_BRIDGE_HOST, 8, quirk_mmio_always_on);
/* The Mellanox Tavor device gives false positive parity errors
* Mark this device with a broken_parity_status, to allow
*/
static void quirk_cardbus_legacy(struct pci_dev *dev)
{
- if ((PCI_CLASS_BRIDGE_CARDBUS << 8) ^ dev->class)
- return;
pci_write_config_dword(dev, PCI_CB_LEGACY_MODE_BASE, 0);
}
-DECLARE_PCI_FIXUP_FINAL(PCI_ANY_ID, PCI_ANY_ID, quirk_cardbus_legacy);
-DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_ANY_ID, PCI_ANY_ID, quirk_cardbus_legacy);
+DECLARE_PCI_FIXUP_CLASS_FINAL(PCI_ANY_ID, PCI_ANY_ID,
+ PCI_CLASS_BRIDGE_CARDBUS, 8, quirk_cardbus_legacy);
+DECLARE_PCI_FIXUP_CLASS_RESUME_EARLY(PCI_ANY_ID, PCI_ANY_ID,
+ PCI_CLASS_BRIDGE_CARDBUS, 8, quirk_cardbus_legacy);
/*
* Following the PCI ordering rules is optional on the AMD762. I'm not
static void __devinit quirk_no_ata_d3(struct pci_dev *pdev)
{
- /* Quirk the legacy ATA devices only. The AHCI ones are ok */
- if ((pdev->class >> 8) == PCI_CLASS_STORAGE_IDE)
- pdev->dev_flags |= PCI_DEV_FLAGS_NO_D3;
+ pdev->dev_flags |= PCI_DEV_FLAGS_NO_D3;
}
-DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_SERVERWORKS, PCI_ANY_ID, quirk_no_ata_d3);
-DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_ATI, PCI_ANY_ID, quirk_no_ata_d3);
+/* Quirk the legacy ATA devices only. The AHCI ones are ok */
+DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_SERVERWORKS, PCI_ANY_ID,
+ PCI_CLASS_STORAGE_IDE, 8, quirk_no_ata_d3);
+DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_ATI, PCI_ANY_ID,
+ PCI_CLASS_STORAGE_IDE, 8, quirk_no_ata_d3);
/* ALi loses some register settings that we cannot then restore */
-DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_AL, PCI_ANY_ID, quirk_no_ata_d3);
+DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_AL, PCI_ANY_ID,
+ PCI_CLASS_STORAGE_IDE, 8, quirk_no_ata_d3);
/* VIA comes back fine but we need to keep it alive or ACPI GTM failures
occur when mode detecting */
-DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_VIA, PCI_ANY_ID, quirk_no_ata_d3);
+DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_VIA, PCI_ANY_ID,
+ PCI_CLASS_STORAGE_IDE, 8, quirk_no_ata_d3);
/* This was originally an Alpha specific thing, but it really fits here.
* The i82375 PCI/EISA bridge appears as non-classified. Fix that.
case PCI_DEVICE_ID_NETMOS_9745:
case PCI_DEVICE_ID_NETMOS_9845:
case PCI_DEVICE_ID_NETMOS_9855:
- if ((dev->class >> 8) == PCI_CLASS_COMMUNICATION_SERIAL &&
- num_parallel) {
+ if (num_parallel) {
dev_info(&dev->dev, "Netmos %04x (%u parallel, "
"%u serial); changing class SERIAL to OTHER "
"(use parport_serial)\n",
}
}
}
-DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NETMOS, PCI_ANY_ID, quirk_netmos);
+DECLARE_PCI_FIXUP_CLASS_HEADER(PCI_VENDOR_ID_NETMOS, PCI_ANY_ID,
+ PCI_CLASS_COMMUNICATION_SERIAL, 8, quirk_netmos);
static void __devinit quirk_e100_interrupt(struct pci_dev *dev)
{
iounmap(csr);
}
-DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_ANY_ID, quirk_e100_interrupt);
+DECLARE_PCI_FIXUP_CLASS_FINAL(PCI_VENDOR_ID_INTEL, PCI_ANY_ID,
+ PCI_CLASS_NETWORK_ETHERNET, 8, quirk_e100_interrupt);
/*
* The 82575 and 82598 may experience data corruption issues when transitioning
static void __devinit fixup_ti816x_class(struct pci_dev* dev)
{
/* TI 816x devices do not have class code set when in PCIe boot mode */
- if (dev->class == PCI_CLASS_NOT_DEFINED) {
- dev_info(&dev->dev, "Setting PCI class for 816x PCIe device\n");
- dev->class = PCI_CLASS_MULTIMEDIA_VIDEO;
- }
+ dev_info(&dev->dev, "Setting PCI class for 816x PCIe device\n");
+ dev->class = PCI_CLASS_MULTIMEDIA_VIDEO;
}
-DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_TI, 0xb800, fixup_ti816x_class);
+DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_TI, 0xb800,
+ PCI_CLASS_NOT_DEFINED, 0, fixup_ti816x_class);
/* Some PCIe devices do not work reliably with the claimed maximum
* payload size supported.
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x65f9, quirk_intel_mc_errata);
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x65fa, quirk_intel_mc_errata);
+
+static void do_one_fixup_debug(void (*fn)(struct pci_dev *dev), struct pci_dev *dev)
+{
+ ktime_t calltime, delta, rettime;
+ unsigned long long duration;
+
+ printk(KERN_DEBUG "calling %pF @ %i for %s\n",
+ fn, task_pid_nr(current), dev_name(&dev->dev));
+ calltime = ktime_get();
+ fn(dev);
+ rettime = ktime_get();
+ delta = ktime_sub(rettime, calltime);
+ duration = (unsigned long long) ktime_to_ns(delta) >> 10;
+ printk(KERN_DEBUG "pci fixup %pF returned after %lld usecs for %s\n",
+ fn, duration, dev_name(&dev->dev));
+}
+
+/*
+ * Some BIOS implementations leave the Intel GPU interrupts enabled,
+ * even though no one is handling them (f.e. i915 driver is never loaded).
+ * Additionally the interrupt destination is not set up properly
+ * and the interrupt ends up -somewhere-.
+ *
+ * These spurious interrupts are "sticky" and the kernel disables
+ * the (shared) interrupt line after 100.000+ generated interrupts.
+ *
+ * Fix it by disabling the still enabled interrupts.
+ * This resolves crashes often seen on monitor unplug.
+ */
+#define I915_DEIER_REG 0x4400c
+static void __devinit disable_igfx_irq(struct pci_dev *dev)
+{
+ void __iomem *regs = pci_iomap(dev, 0, 0);
+ if (regs == NULL) {
+ dev_warn(&dev->dev, "igfx quirk: Can't iomap PCI device\n");
+ return;
+ }
+
+ /* Check if any interrupt line is still enabled */
+ if (readl(regs + I915_DEIER_REG) != 0) {
+ dev_warn(&dev->dev, "BIOS left Intel GPU interrupts enabled; "
+ "disabling\n");
+
+ writel(0, regs + I915_DEIER_REG);
+ }
+
+ pci_iounmap(dev, regs);
+}
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x0102, disable_igfx_irq);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x010a, disable_igfx_irq);
+
static void pci_do_fixups(struct pci_dev *dev, struct pci_fixup *f,
struct pci_fixup *end)
{
- while (f < end) {
- if ((f->vendor == dev->vendor || f->vendor == (u16) PCI_ANY_ID) &&
- (f->device == dev->device || f->device == (u16) PCI_ANY_ID)) {
+ for (; f < end; f++)
+ if ((f->class == (u32) (dev->class >> f->class_shift) ||
+ f->class == (u32) PCI_ANY_ID) &&
+ (f->vendor == dev->vendor ||
+ f->vendor == (u16) PCI_ANY_ID) &&
+ (f->device == dev->device ||
+ f->device == (u16) PCI_ANY_ID)) {
dev_dbg(&dev->dev, "calling %pF\n", f->hook);
- f->hook(dev);
+ if (initcall_debug)
+ do_one_fixup_debug(f->hook, dev);
+ else
+ f->hook(dev);
}
- f++;
- }
}
extern struct pci_fixup __start_pci_fixups_early[];
projects / cascardo / linux.git / blobdiff