return SUCCESS;
case MEDIUM_ERROR:
+ if (sshdr.asc == 0x11 || /* UNRECOVERED READ ERR */
+ sshdr.asc == 0x13 || /* AMNF DATA FIELD */
+ sshdr.asc == 0x14) { /* RECORD NOT FOUND */
+ return SUCCESS;
+ }
return NEEDS_RETRY;
case HARDWARE_ERROR:
}
/**
- * scsi_send_eh_cmnd - send a cmd to a device as part of error recovery.
- * @scmd: SCSI Cmd to send.
- * @timeout: Timeout for cmd.
+ * scsi_try_host_reset - ask host adapter to reset itself
+ * @scmd: SCSI cmd to send hsot reset.
+ **/
+static int scsi_try_host_reset(struct scsi_cmnd *scmd)
+{
+ unsigned long flags;
+ int rtn;
+
+ SCSI_LOG_ERROR_RECOVERY(3, printk("%s: Snd Host RST\n",
+ __FUNCTION__));
+
+ if (!scmd->device->host->hostt->eh_host_reset_handler)
+ return FAILED;
+
+ rtn = scmd->device->host->hostt->eh_host_reset_handler(scmd);
+
+ if (rtn == SUCCESS) {
+ if (!scmd->device->host->hostt->skip_settle_delay)
+ ssleep(HOST_RESET_SETTLE_TIME);
+ spin_lock_irqsave(scmd->device->host->host_lock, flags);
+ scsi_report_bus_reset(scmd->device->host,
+ scmd_channel(scmd));
+ spin_unlock_irqrestore(scmd->device->host->host_lock, flags);
+ }
+
+ return rtn;
+}
+
+/**
+ * scsi_try_bus_reset - ask host to perform a bus reset
+ * @scmd: SCSI cmd to send bus reset.
+ **/
+static int scsi_try_bus_reset(struct scsi_cmnd *scmd)
+{
+ unsigned long flags;
+ int rtn;
+
+ SCSI_LOG_ERROR_RECOVERY(3, printk("%s: Snd Bus RST\n",
+ __FUNCTION__));
+
+ if (!scmd->device->host->hostt->eh_bus_reset_handler)
+ return FAILED;
+
+ rtn = scmd->device->host->hostt->eh_bus_reset_handler(scmd);
+
+ if (rtn == SUCCESS) {
+ if (!scmd->device->host->hostt->skip_settle_delay)
+ ssleep(BUS_RESET_SETTLE_TIME);
+ spin_lock_irqsave(scmd->device->host->host_lock, flags);
+ scsi_report_bus_reset(scmd->device->host,
+ scmd_channel(scmd));
+ spin_unlock_irqrestore(scmd->device->host->host_lock, flags);
+ }
+
+ return rtn;
+}
+
+/**
+ * scsi_try_bus_device_reset - Ask host to perform a BDR on a dev
+ * @scmd: SCSI cmd used to send BDR
+ *
+ * Notes:
+ * There is no timeout for this operation. if this operation is
+ * unreliable for a given host, then the host itself needs to put a
+ * timer on it, and set the host back to a consistent state prior to
+ * returning.
+ **/
+static int scsi_try_bus_device_reset(struct scsi_cmnd *scmd)
+{
+ int rtn;
+
+ if (!scmd->device->host->hostt->eh_device_reset_handler)
+ return FAILED;
+
+ rtn = scmd->device->host->hostt->eh_device_reset_handler(scmd);
+ if (rtn == SUCCESS) {
+ scmd->device->was_reset = 1;
+ scmd->device->expecting_cc_ua = 1;
+ }
+
+ return rtn;
+}
+
+static int __scsi_try_to_abort_cmd(struct scsi_cmnd *scmd)
+{
+ if (!scmd->device->host->hostt->eh_abort_handler)
+ return FAILED;
+
+ return scmd->device->host->hostt->eh_abort_handler(scmd);
+}
+
+/**
+ * scsi_try_to_abort_cmd - Ask host to abort a running command.
+ * @scmd: SCSI cmd to abort from Lower Level.
+ *
+ * Notes:
+ * This function will not return until the user's completion function
+ * has been called. there is no timeout on this operation. if the
+ * author of the low-level driver wishes this operation to be timed,
+ * they can provide this facility themselves. helper functions in
+ * scsi_error.c can be supplied to make this easier to do.
+ **/
+static int scsi_try_to_abort_cmd(struct scsi_cmnd *scmd)
+{
+ /*
+ * scsi_done was called just after the command timed out and before
+ * we had a chance to process it. (db)
+ */
+ if (scmd->serial_number == 0)
+ return SUCCESS;
+ return __scsi_try_to_abort_cmd(scmd);
+}
+
+static void scsi_abort_eh_cmnd(struct scsi_cmnd *scmd)
+{
+ if (__scsi_try_to_abort_cmd(scmd) != SUCCESS)
+ if (scsi_try_bus_device_reset(scmd) != SUCCESS)
+ if (scsi_try_bus_reset(scmd) != SUCCESS)
+ scsi_try_host_reset(scmd);
+}
+
+/**
+ * scsi_send_eh_cmnd - submit a scsi command as part of error recory
+ * @scmd: SCSI command structure to hijack
+ * @cmnd: CDB to send
+ * @cmnd_size: size in bytes of @cmnd
+ * @timeout: timeout for this request
+ * @copy_sense: request sense data if set to 1
+ *
+ * This function is used to send a scsi command down to a target device
+ * as part of the error recovery process. If @copy_sense is 0 the command
+ * sent must be one that does not transfer any data. If @copy_sense is 1
+ * the command must be REQUEST_SENSE and this functions copies out the
+ * sense buffer it got into @scmd->sense_buffer.
*
* Return value:
* SUCCESS or FAILED or NEEDS_RETRY
struct scsi_device *sdev = scmd->device;
struct Scsi_Host *shost = sdev->host;
int old_result = scmd->result;
- DECLARE_COMPLETION(done);
+ DECLARE_COMPLETION_ONSTACK(done);
unsigned long timeleft;
unsigned long flags;
+ struct scatterlist sgl;
unsigned char old_cmnd[MAX_COMMAND_SIZE];
enum dma_data_direction old_data_direction;
unsigned short old_use_sg;
memcpy(scmd->cmnd, cmnd, cmnd_size);
if (copy_sense) {
- int gfp_mask = GFP_ATOMIC;
+ gfp_t gfp_mask = GFP_ATOMIC;
if (shost->hostt->unchecked_isa_dma)
gfp_mask |= __GFP_DMA;
- scmd->sc_data_direction = DMA_FROM_DEVICE;
- scmd->request_bufflen = 252;
- scmd->request_buffer = kzalloc(scmd->request_bufflen, gfp_mask);
- if (!scmd->request_buffer)
+ sgl.page = alloc_page(gfp_mask);
+ if (!sgl.page)
return FAILED;
+ sgl.offset = 0;
+ sgl.length = 252;
+
+ scmd->sc_data_direction = DMA_FROM_DEVICE;
+ scmd->request_bufflen = sgl.length;
+ scmd->request_buffer = &sgl;
+ scmd->use_sg = 1;
} else {
scmd->request_buffer = NULL;
scmd->request_bufflen = 0;
scmd->sc_data_direction = DMA_NONE;
+ scmd->use_sg = 0;
}
scmd->underflow = 0;
- scmd->use_sg = 0;
scmd->cmd_len = COMMAND_SIZE(scmd->cmnd[0]);
if (sdev->scsi_level <= SCSI_2)
break;
}
} else {
- /*
- * FIXME(eric) - we are not tracking whether we could
- * abort a timed out command or not. not sure how
- * we should treat them differently anyways.
- */
- if (shost->hostt->eh_abort_handler)
- shost->hostt->eh_abort_handler(scmd);
+ scsi_abort_eh_cmnd(scmd);
rtn = FAILED;
}
memcpy(scmd->sense_buffer, scmd->request_buffer,
sizeof(scmd->sense_buffer));
}
- kfree(scmd->request_buffer);
+ __free_page(sgl.page);
}
* XXX: Long term this code should go away, but that needs an audit of
* all LLDDs first.
**/
-static int scsi_eh_get_sense(struct list_head *work_q,
- struct list_head *done_q)
+int scsi_eh_get_sense(struct list_head *work_q,
+ struct list_head *done_q)
{
struct scsi_cmnd *scmd, *next;
int rtn;
return list_empty(work_q);
}
-
-/**
- * scsi_try_to_abort_cmd - Ask host to abort a running command.
- * @scmd: SCSI cmd to abort from Lower Level.
- *
- * Notes:
- * This function will not return until the user's completion function
- * has been called. there is no timeout on this operation. if the
- * author of the low-level driver wishes this operation to be timed,
- * they can provide this facility themselves. helper functions in
- * scsi_error.c can be supplied to make this easier to do.
- **/
-static int scsi_try_to_abort_cmd(struct scsi_cmnd *scmd)
-{
- if (!scmd->device->host->hostt->eh_abort_handler)
- return FAILED;
-
- /*
- * scsi_done was called just after the command timed out and before
- * we had a chance to process it. (db)
- */
- if (scmd->serial_number == 0)
- return SUCCESS;
- return scmd->device->host->hostt->eh_abort_handler(scmd);
-}
+EXPORT_SYMBOL_GPL(scsi_eh_get_sense);
/**
* scsi_eh_tur - Send TUR to device.
return list_empty(work_q);
}
-/**
- * scsi_try_bus_device_reset - Ask host to perform a BDR on a dev
- * @scmd: SCSI cmd used to send BDR
- *
- * Notes:
- * There is no timeout for this operation. if this operation is
- * unreliable for a given host, then the host itself needs to put a
- * timer on it, and set the host back to a consistent state prior to
- * returning.
- **/
-static int scsi_try_bus_device_reset(struct scsi_cmnd *scmd)
-{
- int rtn;
-
- if (!scmd->device->host->hostt->eh_device_reset_handler)
- return FAILED;
-
- rtn = scmd->device->host->hostt->eh_device_reset_handler(scmd);
- if (rtn == SUCCESS) {
- scmd->device->was_reset = 1;
- scmd->device->expecting_cc_ua = 1;
- }
-
- return rtn;
-}
-
/**
* scsi_eh_try_stu - Send START_UNIT to device.
* @scmd: Scsi cmd to send START_UNIT
return list_empty(work_q);
}
-/**
- * scsi_try_bus_reset - ask host to perform a bus reset
- * @scmd: SCSI cmd to send bus reset.
- **/
-static int scsi_try_bus_reset(struct scsi_cmnd *scmd)
-{
- unsigned long flags;
- int rtn;
-
- SCSI_LOG_ERROR_RECOVERY(3, printk("%s: Snd Bus RST\n",
- __FUNCTION__));
-
- if (!scmd->device->host->hostt->eh_bus_reset_handler)
- return FAILED;
-
- rtn = scmd->device->host->hostt->eh_bus_reset_handler(scmd);
-
- if (rtn == SUCCESS) {
- if (!scmd->device->host->hostt->skip_settle_delay)
- ssleep(BUS_RESET_SETTLE_TIME);
- spin_lock_irqsave(scmd->device->host->host_lock, flags);
- scsi_report_bus_reset(scmd->device->host,
- scmd_channel(scmd));
- spin_unlock_irqrestore(scmd->device->host->host_lock, flags);
- }
-
- return rtn;
-}
-
-/**
- * scsi_try_host_reset - ask host adapter to reset itself
- * @scmd: SCSI cmd to send hsot reset.
- **/
-static int scsi_try_host_reset(struct scsi_cmnd *scmd)
-{
- unsigned long flags;
- int rtn;
-
- SCSI_LOG_ERROR_RECOVERY(3, printk("%s: Snd Host RST\n",
- __FUNCTION__));
-
- if (!scmd->device->host->hostt->eh_host_reset_handler)
- return FAILED;
-
- rtn = scmd->device->host->hostt->eh_host_reset_handler(scmd);
-
- if (rtn == SUCCESS) {
- if (!scmd->device->host->hostt->skip_settle_delay)
- ssleep(HOST_RESET_SETTLE_TIME);
- spin_lock_irqsave(scmd->device->host->host_lock, flags);
- scsi_report_bus_reset(scmd->device->host,
- scmd_channel(scmd));
- spin_unlock_irqrestore(scmd->device->host->host_lock, flags);
- }
-
- return rtn;
-}
-
/**
* scsi_eh_bus_reset - send a bus reset
* @shost: scsi host being recovered.
* @eh_done_q: list_head for processed commands.
*
**/
-static void scsi_eh_ready_devs(struct Scsi_Host *shost,
- struct list_head *work_q,
- struct list_head *done_q)
+void scsi_eh_ready_devs(struct Scsi_Host *shost,
+ struct list_head *work_q,
+ struct list_head *done_q)
{
if (!scsi_eh_stu(shost, work_q, done_q))
if (!scsi_eh_bus_device_reset(shost, work_q, done_q))
if (!scsi_eh_host_reset(work_q, done_q))
scsi_eh_offline_sdevs(work_q, done_q);
}
+EXPORT_SYMBOL_GPL(scsi_eh_ready_devs);
/**
* scsi_eh_flush_done_q - finish processed commands or retry them.
projects / cascardo / linux.git / blobdiff