*
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/kernel.h>
#include <linux/errno.h>
#include <linux/init.h>
#include <linux/kfifo.h>
#include "pl2303.h"
-/*
- * Version Information
- */
-#define DRIVER_AUTHOR "Greg Kroah-Hartman, greg@kroah.com, http://www.kroah.com/linux/"
+#define DRIVER_AUTHOR "Greg Kroah-Hartman <gregkh@linuxfoundation.org>"
#define DRIVER_DESC "USB Serial Driver core"
/* There is no MODULE_DEVICE_TABLE for usbserial.c. Instead
drivers depend on it.
*/
-static bool debug;
/* initially all NULL */
static struct usb_serial *serial_table[SERIAL_TTY_MINORS];
static DEFINE_MUTEX(table_lock);
unsigned int i, j;
int good_spot;
- dbg("%s %d", __func__, num_ports);
+ dev_dbg(&serial->interface->dev, "%s %d\n", __func__, num_ports);
*minor = 0;
mutex_lock(&table_lock);
*minor = i;
j = 0;
- dbg("%s - minor base = %d", __func__, *minor);
+ dev_dbg(&serial->interface->dev, "%s - minor base = %d\n", __func__, *minor);
for (i = *minor; (i < (*minor + num_ports)) && (i < SERIAL_TTY_MINORS); ++i) {
serial_table[i] = serial;
serial->port[j++]->number = i;
{
int i;
- dbg("%s", __func__);
-
mutex_lock(&table_lock);
for (i = 0; i < serial->num_ports; ++i)
serial_table[serial->minor + i] = NULL;
serial = to_usb_serial(kref);
- dbg("%s - %s", __func__, serial->type->description);
-
/* return the minor range that this device had */
if (serial->minor != SERIAL_TTY_NO_MINOR)
return_serial(serial);
struct usb_serial_port *port;
int retval = -ENODEV;
- dbg("%s", __func__);
-
serial = usb_serial_get_by_index(idx);
if (!serial)
return retval;
{
struct usb_serial_port *port = tty->driver_data;
- dbg("%s - port %d", __func__, port->number);
+ dev_dbg(tty->dev, "%s - port %d\n", __func__, port->number);
return tty_port_open(&port->port, tty, filp);
}
static void serial_hangup(struct tty_struct *tty)
{
struct usb_serial_port *port = tty->driver_data;
- dbg("%s - port %d", __func__, port->number);
+
+ dev_dbg(tty->dev, "%s - port %d\n", __func__, port->number);
tty_port_hangup(&port->port);
}
static void serial_close(struct tty_struct *tty, struct file *filp)
{
struct usb_serial_port *port = tty->driver_data;
- dbg("%s - port %d", __func__, port->number);
+
+ dev_dbg(tty->dev, "%s - port %d\n", __func__, port->number);
tty_port_close(&port->port, tty, filp);
}
if (port->port.console)
return;
- dbg("%s - port %d", __func__, port->number);
+ dev_dbg(tty->dev, "%s - port %d\n", __func__, port->number);
tty->driver_data = NULL;
if (port->serial->dev->state == USB_STATE_NOTATTACHED)
goto exit;
- dbg("%s - port %d, %d byte(s)", __func__, port->number, count);
+ dev_dbg(tty->dev, "%s - port %d, %d byte(s)\n", __func__,
+ port->number, count);
/* pass on to the driver specific version of this function */
retval = port->serial->type->write(tty, port, buf, count);
static int serial_write_room(struct tty_struct *tty)
{
struct usb_serial_port *port = tty->driver_data;
- dbg("%s - port %d", __func__, port->number);
+
+ dev_dbg(tty->dev, "%s - port %d\n", __func__, port->number);
/* pass on to the driver specific version of this function */
return port->serial->type->write_room(tty);
}
static int serial_chars_in_buffer(struct tty_struct *tty)
{
struct usb_serial_port *port = tty->driver_data;
- dbg("%s - port %d", __func__, port->number);
+
+ dev_dbg(tty->dev, "%s - port %d\n", __func__, port->number);
/* if the device was unplugged then any remaining characters
fell out of the connector ;) */
static void serial_throttle(struct tty_struct *tty)
{
struct usb_serial_port *port = tty->driver_data;
- dbg("%s - port %d", __func__, port->number);
+
+ dev_dbg(tty->dev, "%s - port %d\n", __func__, port->number);
/* pass on to the driver specific version of this function */
if (port->serial->type->throttle)
static void serial_unthrottle(struct tty_struct *tty)
{
struct usb_serial_port *port = tty->driver_data;
- dbg("%s - port %d", __func__, port->number);
+
+ dev_dbg(tty->dev, "%s - port %d\n", __func__, port->number);
/* pass on to the driver specific version of this function */
if (port->serial->type->unthrottle)
struct usb_serial_port *port = tty->driver_data;
int retval = -ENODEV;
- dbg("%s - port %d, cmd 0x%.4x", __func__, port->number, cmd);
+ dev_dbg(tty->dev, "%s - port %d, cmd 0x%.4x\n", __func__,
+ port->number, cmd);
/* pass on to the driver specific version of this function
if it is available */
static void serial_set_termios(struct tty_struct *tty, struct ktermios *old)
{
struct usb_serial_port *port = tty->driver_data;
- dbg("%s - port %d", __func__, port->number);
+
+ dev_dbg(tty->dev, "%s - port %d\n", __func__, port->number);
/* pass on to the driver specific version of this function
if it is available */
{
struct usb_serial_port *port = tty->driver_data;
- dbg("%s - port %d", __func__, port->number);
+ dev_dbg(tty->dev, "%s - port %d\n", __func__, port->number);
/* pass on to the driver specific version of this function
if it is available */
int i;
char tmp[40];
- dbg("%s", __func__);
seq_puts(m, "usbserinfo:1.0 driver:2.0\n");
for (i = 0; i < SERIAL_TTY_MINORS; ++i) {
serial = usb_serial_get_by_index(i);
{
struct usb_serial_port *port = tty->driver_data;
- dbg("%s - port %d", __func__, port->number);
+ dev_dbg(tty->dev, "%s - port %d\n", __func__, port->number);
if (port->serial->type->tiocmget)
return port->serial->type->tiocmget(tty);
{
struct usb_serial_port *port = tty->driver_data;
- dbg("%s - port %d", __func__, port->number);
+ dev_dbg(tty->dev, "%s - port %d\n", __func__, port->number);
if (port->serial->type->tiocmset)
return port->serial->type->tiocmset(tty, set, clear);
{
struct usb_serial_port *port = tty->driver_data;
- dbg("%s - port %d", __func__, port->number);
+ dev_dbg(tty->dev, "%s - port %d\n", __func__, port->number);
if (port->serial->type->get_icount)
return port->serial->type->get_icount(tty, icount);
container_of(work, struct usb_serial_port, work);
struct tty_struct *tty;
- dbg("%s - port %d", __func__, port->number);
-
tty = tty_port_tty_get(&port->port);
if (!tty)
return;
+ dev_dbg(tty->dev, "%s - port %d\n", __func__, port->number);
+
tty_wakeup(tty);
tty_kref_put(tty);
}
struct usb_serial_port *port = to_usb_serial_port(dev);
int i;
- dbg ("%s - %s", __func__, dev_name(dev));
+ dev_dbg(dev, "%s\n", __func__);
/*
* Stop all the traffic before cancelling the work, so that
id = usb_match_id(intf, drv->id_table);
if (id) {
- dbg("static descriptor matches");
+ dev_dbg(&intf->dev, "static descriptor matches\n");
goto exit;
}
id = match_dynamic_id(intf, drv);
if (id)
- dbg("dynamic descriptor matches");
+ dev_dbg(&intf->dev, "dynamic descriptor matches\n");
exit:
return id;
}
static int usb_serial_probe(struct usb_interface *interface,
const struct usb_device_id *id)
{
+ struct device *ddev = &interface->dev;
struct usb_device *dev = interface_to_usbdev(interface);
struct usb_serial *serial = NULL;
struct usb_serial_port *port;
type = search_serial_device(interface);
if (!type) {
mutex_unlock(&table_lock);
- dbg("none matched");
+ dev_dbg(ddev, "none matched\n");
return -ENODEV;
}
if (!try_module_get(type->driver.owner)) {
mutex_unlock(&table_lock);
- dev_err(&interface->dev, "module get failed, exiting\n");
+ dev_err(ddev, "module get failed, exiting\n");
return -EIO;
}
mutex_unlock(&table_lock);
serial = create_serial(dev, interface, type);
if (!serial) {
module_put(type->driver.owner);
- dev_err(&interface->dev, "%s - out of memory\n", __func__);
+ dev_err(ddev, "%s - out of memory\n", __func__);
return -ENOMEM;
}
retval = type->probe(serial, id);
if (retval) {
- dbg("sub driver rejected device");
+ dev_dbg(ddev, "sub driver rejected device\n");
usb_serial_put(serial);
module_put(type->driver.owner);
return retval;
if (usb_endpoint_is_bulk_in(endpoint)) {
/* we found a bulk in endpoint */
- dbg("found bulk in on endpoint %d", i);
+ dev_dbg(ddev, "found bulk in on endpoint %d\n", i);
bulk_in_endpoint[num_bulk_in] = endpoint;
++num_bulk_in;
}
if (usb_endpoint_is_bulk_out(endpoint)) {
/* we found a bulk out endpoint */
- dbg("found bulk out on endpoint %d", i);
+ dev_dbg(ddev, "found bulk out on endpoint %d\n", i);
bulk_out_endpoint[num_bulk_out] = endpoint;
++num_bulk_out;
}
if (usb_endpoint_is_int_in(endpoint)) {
/* we found a interrupt in endpoint */
- dbg("found interrupt in on endpoint %d", i);
+ dev_dbg(ddev, "found interrupt in on endpoint %d\n", i);
interrupt_in_endpoint[num_interrupt_in] = endpoint;
++num_interrupt_in;
}
if (usb_endpoint_is_int_out(endpoint)) {
/* we found an interrupt out endpoint */
- dbg("found interrupt out on endpoint %d", i);
+ dev_dbg(ddev, "found interrupt out on endpoint %d\n", i);
interrupt_out_endpoint[num_interrupt_out] = endpoint;
++num_interrupt_out;
}
endpoint = &iface_desc->endpoint[i].desc;
if (usb_endpoint_is_int_in(endpoint)) {
/* we found a interrupt in endpoint */
- dbg("found interrupt in for Prolific device on separate interface");
+ dev_dbg(ddev, "found interrupt in for Prolific device on separate interface\n");
interrupt_in_endpoint[num_interrupt_in] = endpoint;
++num_interrupt_in;
}
* properly during a later invocation of usb_serial_probe
*/
if (num_bulk_in == 0 || num_bulk_out == 0) {
- dev_info(&interface->dev, "PL-2303 hack: descriptors matched but endpoints did not\n");
+ dev_info(ddev, "PL-2303 hack: descriptors matched but endpoints did not\n");
usb_serial_put(serial);
module_put(type->driver.owner);
return -ENODEV;
if (type == &usb_serial_generic_device) {
num_ports = num_bulk_out;
if (num_ports == 0) {
- dev_err(&interface->dev,
- "Generic device with no bulk out, not allowed.\n");
+ dev_err(ddev, "Generic device with no bulk out, not allowed.\n");
usb_serial_put(serial);
module_put(type->driver.owner);
return -EIO;
}
- dev_info(&interface->dev, "The \"generic\" usb-serial driver is only for testing and one-off prototypes.\n");
- dev_info(&interface->dev, "Tell linux-usb@vger.kernel.org to add your device to a proper driver.\n");
+ dev_info(ddev, "The \"generic\" usb-serial driver is only for testing and one-off prototypes.\n");
+ dev_info(ddev, "Tell linux-usb@vger.kernel.org to add your device to a proper driver.\n");
}
#endif
if (!num_ports) {
serial->num_interrupt_out = num_interrupt_out;
/* found all that we need */
- dev_info(&interface->dev, "%s converter detected\n",
- type->description);
+ dev_info(ddev, "%s converter detected\n", type->description);
/* create our ports, we need as many as the max endpoints */
/* we don't use num_ports here because some devices have more
max_endpoints = max(max_endpoints, (int)serial->num_ports);
serial->num_port_pointers = max_endpoints;
- dbg("%s - setting up %d port structures for this device",
- __func__, max_endpoints);
+ dev_dbg(ddev, "setting up %d port structures for this device", max_endpoints);
for (i = 0; i < max_endpoints; ++i) {
port = kzalloc(sizeof(struct usb_serial_port), GFP_KERNEL);
if (!port)
set_bit(j, &port->read_urbs_free);
port->read_urbs[j] = usb_alloc_urb(0, GFP_KERNEL);
if (!port->read_urbs[j]) {
- dev_err(&interface->dev,
- "No free urbs available\n");
+ dev_err(ddev, "No free urbs available\n");
goto probe_error;
}
port->bulk_in_buffers[j] = kmalloc(buffer_size,
GFP_KERNEL);
if (!port->bulk_in_buffers[j]) {
- dev_err(&interface->dev,
- "Couldn't allocate bulk_in_buffer\n");
+ dev_err(ddev, "Couldn't allocate bulk_in_buffer\n");
goto probe_error;
}
usb_fill_bulk_urb(port->read_urbs[j], dev,
set_bit(j, &port->write_urbs_free);
port->write_urbs[j] = usb_alloc_urb(0, GFP_KERNEL);
if (!port->write_urbs[j]) {
- dev_err(&interface->dev,
- "No free urbs available\n");
+ dev_err(ddev, "No free urbs available\n");
goto probe_error;
}
port->bulk_out_buffers[j] = kmalloc(buffer_size,
GFP_KERNEL);
if (!port->bulk_out_buffers[j]) {
- dev_err(&interface->dev,
- "Couldn't allocate bulk_out_buffer\n");
+ dev_err(ddev, "Couldn't allocate bulk_out_buffer\n");
goto probe_error;
}
usb_fill_bulk_urb(port->write_urbs[j], dev,
port = serial->port[i];
port->interrupt_in_urb = usb_alloc_urb(0, GFP_KERNEL);
if (!port->interrupt_in_urb) {
- dev_err(&interface->dev,
- "No free urbs available\n");
+ dev_err(ddev, "No free urbs available\n");
goto probe_error;
}
buffer_size = usb_endpoint_maxp(endpoint);
port->interrupt_in_buffer = kmalloc(buffer_size,
GFP_KERNEL);
if (!port->interrupt_in_buffer) {
- dev_err(&interface->dev,
- "Couldn't allocate interrupt_in_buffer\n");
+ dev_err(ddev, "Couldn't allocate interrupt_in_buffer\n");
goto probe_error;
}
usb_fill_int_urb(port->interrupt_in_urb, dev,
endpoint->bInterval);
}
} else if (num_interrupt_in) {
- dbg("the device claims to support interrupt in transfers, but read_int_callback is not defined");
+ dev_dbg(ddev, "The device claims to support interrupt in transfers, but read_int_callback is not defined\n");
}
if (serial->type->write_int_callback) {
port = serial->port[i];
port->interrupt_out_urb = usb_alloc_urb(0, GFP_KERNEL);
if (!port->interrupt_out_urb) {
- dev_err(&interface->dev,
- "No free urbs available\n");
+ dev_err(ddev, "No free urbs available\n");
goto probe_error;
}
buffer_size = usb_endpoint_maxp(endpoint);
port->interrupt_out_buffer = kmalloc(buffer_size,
GFP_KERNEL);
if (!port->interrupt_out_buffer) {
- dev_err(&interface->dev,
- "Couldn't allocate interrupt_out_buffer\n");
+ dev_err(ddev, "Couldn't allocate interrupt_out_buffer\n");
goto probe_error;
}
usb_fill_int_urb(port->interrupt_out_urb, dev,
endpoint->bInterval);
}
} else if (num_interrupt_out) {
- dbg("the device claims to support interrupt out transfers, but write_int_callback is not defined");
+ dev_dbg(ddev, "The device claims to support interrupt out transfers, but write_int_callback is not defined\n");
}
usb_set_intfdata(interface, serial);
serial->disconnected = 1;
if (get_free_serial(serial, num_ports, &minor) == NULL) {
- dev_err(&interface->dev, "No more free serial devices\n");
+ dev_err(ddev, "No more free serial devices\n");
goto probe_error;
}
serial->minor = minor;
for (i = 0; i < num_ports; ++i) {
port = serial->port[i];
dev_set_name(&port->dev, "ttyUSB%d", port->number);
- dbg ("%s - registering %s", __func__, dev_name(&port->dev));
+ dev_dbg(ddev, "registering %s", dev_name(&port->dev));
device_enable_async_suspend(&port->dev);
retval = device_add(&port->dev);
if (retval)
- dev_err(&port->dev, "Error registering port device, "
- "continuing\n");
+ dev_err(ddev, "Error registering port device, continuing\n");
}
serial->disconnected = 0;
- usb_serial_console_init(debug, minor);
+ usb_serial_console_init(minor);
exit:
module_put(type->driver.owner);
return 0;
struct usb_serial_port *port;
usb_serial_console_disconnect(serial);
- dbg("%s", __func__);
mutex_lock(&serial->disc_mutex);
/* must set a flag, to signal subdrivers */
result = bus_register(&usb_serial_bus_type);
if (result) {
- printk(KERN_ERR "usb-serial: %s - registering bus driver "
- "failed\n", __func__);
+ pr_err("%s - registering bus driver failed\n", __func__);
goto exit_bus;
}
tty_set_operations(usb_serial_tty_driver, &serial_ops);
result = tty_register_driver(usb_serial_tty_driver);
if (result) {
- printk(KERN_ERR "usb-serial: %s - tty_register_driver failed\n",
- __func__);
+ pr_err("%s - tty_register_driver failed\n", __func__);
goto exit_reg_driver;
}
/* register the USB driver */
result = usb_register(&usb_serial_driver);
if (result < 0) {
- printk(KERN_ERR "usb-serial: %s - usb_register failed\n",
- __func__);
+ pr_err("%s - usb_register failed\n", __func__);
goto exit_tty;
}
/* register the generic driver, if we should */
- result = usb_serial_generic_register(debug);
+ result = usb_serial_generic_register();
if (result < 0) {
- printk(KERN_ERR "usb-serial: %s - registering generic "
- "driver failed\n", __func__);
+ pr_err("%s - registering generic driver failed\n", __func__);
goto exit_generic;
}
- printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_DESC "\n");
-
return result;
exit_generic:
bus_unregister(&usb_serial_bus_type);
exit_bus:
- printk(KERN_ERR "usb-serial: %s - returning with error %d\n",
- __func__, result);
+ pr_err("%s - returning with error %d\n", __func__, result);
put_tty_driver(usb_serial_tty_driver);
return result;
}
do { \
if (!type->function) { \
type->function = usb_serial_generic_##function; \
- dbg("Had to override the " #function \
+ pr_debug("Had to override the " #function \
" usb serial operation with the generic one.");\
} \
} while (0)
retval = usb_serial_bus_register(driver);
if (retval) {
- printk(KERN_ERR "usb-serial: problem %d when registering "
- "driver %s\n", retval, driver->description);
+ pr_err("problem %d when registering driver %s\n", retval, driver->description);
list_del(&driver->driver_list);
} else
- printk(KERN_INFO "USB Serial support registered for %s\n",
- driver->description);
+ pr_info("USB Serial support registered for %s\n", driver->description);
mutex_unlock(&table_lock);
return retval;
static void usb_serial_deregister(struct usb_serial_driver *device)
{
- printk(KERN_INFO "USB Serial deregistering driver %s\n",
- device->description);
+ pr_info("USB Serial deregistering driver %s\n", device->description);
mutex_lock(&table_lock);
list_del(&device->driver_list);
usb_serial_bus_deregister(device);
/* we only set the reset_resume field if the serial_driver has one */
for (sd = serial_drivers; *sd; ++sd) {
- if ((*sd)->reset_resume)
+ if ((*sd)->reset_resume) {
udriver->reset_resume = usb_serial_reset_resume;
break;
+ }
}
rc = usb_register(udriver);
MODULE_AUTHOR(DRIVER_AUTHOR);
MODULE_DESCRIPTION(DRIVER_DESC);
MODULE_LICENSE("GPL");
-
-module_param(debug, bool, S_IRUGO | S_IWUSR);
-MODULE_PARM_DESC(debug, "Debug enabled or not");
projects / cascardo / linux.git / blobdiff